summaryrefslogtreecommitdiff
path: root/include/media
AgeCommit message (Collapse)AuthorFilesLines
2019-07-09Merge tag 'media/v5.3-1' of ↵Linus Torvalds12-82/+531
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new Atmel microship ISC driver - coda has gained support for mpeg2 and mpeg4 - cxusb gained support for analog TV - rockchip staging driver was split into two separate staging drivers - added a new staging driver for Allegro DVT video IP core - added a new staging driver for Amlogic Meson video decoder - lots of improvements and cleanups * tag 'media/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (398 commits) media: allegro: use new v4l2_m2m_ioctl_try_encoder_cmd funcs media: doc-rst: Fix typos media: radio-raremono: change devm_k*alloc to k*alloc media: stv0297: fix frequency range limit media: rc: Prefer KEY_NUMERIC_* for number buttons on remotes media: dvb_frontend: split dvb_frontend_handle_ioctl function media: mceusb: disable "nonsensical irdata" messages media: rc: remove redundant dev_err message media: cec-notifier: add new notifier functions media: cec: add struct cec_connector_info support media: cec-notifier: rename variables, check kstrdup and n->conn_name media: MAINTAINERS: Add maintainers for Media Controller media: staging: media: tegra-vde: Defer dmabuf's unmapping media: staging: media: tegra-vde: Add IOMMU support media: hdpvr: fix locking and a missing msleep media: v4l2: Test type instead of cfg->type in v4l2_ctrl_new_custom() media: atmel: atmel-isc: fix i386 build error media: v4l2-ctrl: Move compound control initialization media: hantro: Use vb2_get_buffer media: pci: cx88: Change the type of 'missed' to u64 ...
2019-06-27media: cec-notifier: add new notifier functionsHans Verkuil1-0/+78
In order to support multiple CEC devices for an HDMI connector, and to support cec_connector_info, drivers should use either a cec_notifier_conn_(un)register pair of functions (HDMI drivers) or a cec_notifier_cec_adap_(un)register pair (CEC adapter drivers). This replaces cec_notifier_get_conn/cec_notifier_put. For CEC adapters it is also no longer needed to call cec_notifier_register, cec_register_cec_notifier and cec_notifier_unregister. This is now all handled internally by the new functions. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-27media: cec: add struct cec_connector_info supportDariusz Marcinkiewicz2-40/+97
Define struct cec_connector_info in media/cec.h and define CEC_CAP_CONNECTOR_INFO. In a later patch this will be moved to uapi/linux/cec.h. The CEC_CAP_CONNECTOR_INFO capability can be set by drivers, but cec_allocate_adapter() will remove it again until the public API for this can be enabled once all drm drivers wire this up correctly. Also add the cec_fill_conn_info_from_drm and cec_s_conn_info functions, which are needed by drm drivers to fill in the cec_connector info based on a drm_connector. The cec_notifier_(un)register and cec_register_cec_notifier prototypes were moved from cec-notifier.h to cec.h since cec.h no longer includes cec-notifier.h. These headers included each other before, which caused various problems. Due to these changes the seco-cec driver was changed as well: it should include cec-notifier.h, not cec.h. Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: v4l2-subdev: Verify arguments in v4l2_subdev_call()Janusz Krzysztofik1-0/+6
Correctness of format type (try or active) and pad number parameters passed to subdevice operation callbacks is now verified only for IOCTL calls. However, those callbacks are also used by drivers, e.g., V4L2 host interfaces. Since both subdev_do_ioctl() and drivers are using v4l2_subdev_call() macro while calling subdevice operations, move those parameter checks from subdev_do_ioctl() to v4l2_subdev_call() so we can avoid taking care of those checks inside drivers. Define a wrapper function for each operation callback in scope, then gather those wrappers in a static v4l2_subdev_ops structure so the v4l2_subdev_call() macro can find them easy if provided. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-21media: vb2: Introduce a vb2_get_buffer accessorEzequiel Garcia1-0/+18
Some drivers need to access a vb2 buffer from its queue index. Introduce an accessor to abstract this, and avoid drivers from accessing private members. Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner18-72/+18
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486Thomas Gleixner1-10/+1
Based on 1 normalized pattern(s): this package is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 3 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081205.116017757@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 237Thomas Gleixner4-16/+4
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 8 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204654.096873163@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-11Merge tag 'v5.2-rc4' into media/masterMauro Carvalho Chehab46-405/+46
There are some conflicts due to SPDX changes. We also have more patches being merged via media tree touching them. So, let's merge back from upstream and address those. Linux 5.2-rc4 * tag 'v5.2-rc4': (767 commits) Linux 5.2-rc4 MAINTAINERS: Karthikeyan Ramasubramanian is MIA i2c: xiic: Add max_read_len quirk lockref: Limit number of cmpxchg loop retries uaccess: add noop untagged_addr definition x86/insn-eval: Fix use-after-free access to LDT entry kbuild: use more portable 'command -v' for cc-cross-prefix s390/unwind: correct stack switching during unwind block, bfq: add weight symlink to the bfq.weight cgroup parameter cgroup: let a symlink too be created with a cftype file drm/nouveau/secboot/gp10[2467]: support newer FW to fix SEC2 failures on some boards drm/nouveau/secboot: enable loading of versioned LS PMU/SEC2 ACR msgqueue FW drm/nouveau/secboot: split out FW version-specific LS function pointers drm/nouveau/secboot: pass max supported FW version to LS load funcs drm/nouveau/core: support versioned firmware loading drm/nouveau/core: pass subdev into nvkm_firmware_get, rather than device block: free sched's request pool in blk_cleanup_queue pktgen: do not sleep with the thread lock held. net: mvpp2: Use strscpy to handle stat strings net: rds: fix memory leak in rds_ib_flush_mr_pool ... Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 316Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 this program is distributed without any warranty of any kind whether express or implied without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 2 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000434.889824453@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 286Thomas Gleixner5-46/+5
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 97 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.025053186@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 285Thomas Gleixner2-19/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 100 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.918357685@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05media: docs: fix minor typosMarc Gonzalez1-2/+2
Fix minor typos in the DVB demux documentation. Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: v4l2-mem2mem: add try_en/decoder_cmd ioctl helpersHans Verkuil1-0/+4
Most if not all codecs will need to implement these ioctls and it is expected to be the same for all codecs. So add this to the core v4l2-mem2mem framework so that this code can easily be reused. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: v4l2: Get rid of ->vidioc_enum_fmt_vid_{cap, out}_mplaneBoris Brezillon1-12/+2
Support for multiplanar and singleplanar formats is mutually exclusive, at least in practice. In our attempt to unify support for support for mplane and !mplane in v4l, let's get rid of the ->vidioc_enum_fmt_{vid,out}_cap_mplane() hooks and call ->vidioc_enum_fmt_{vid,out}_cap() instead. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> [hverkuil-cisco@xs4all.nl: fix typos: pirv -> priv and prov -> priv] Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206Thomas Gleixner1-4/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 107 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.615055994@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner10-94/+10
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 172Thomas Gleixner1-3/+1
Based on 1 normalized pattern(s): this file may be distributed under the terms of the gnu general public license version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 9 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.395589349@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner15-151/+15
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner3-39/+3
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner8-40/+8
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-29media: v4l2-common: Add an helper to apply frmsize constraintsBoris Brezillon1-0/+2
The rockchip VPU driver is open-coding this logic which seems pretty generic. Let's provide an helper to apply the min/max and alignment constraints on width/height. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-29media: v4l2-common: Fix v4l2_fill_pixfmt[_mp]() prototypesBoris Brezillon1-4/+4
Width/height and 4CC formats are expressed using u32 types everywhere, let's fix the v4l2_fill_pixfmt[_mp]() prototypes to do the same. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-29media: cx25840: Address several coding style issuesMauro Carvalho Chehab1-14/+19
As we did a major change on this file, let's take the moment to cleanup several coding style issues on it. This patch was partially done with the help of two tools: ./scripts/checkpatch.pl --fix-inplace --strict astyle --indent=tab=8 --style=linux But manually adjusted in order to fit our style. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-29media: videobuf2-vmalloc: get_userptr: buffers are always writableHans Verkuil1-2/+1
In vb2_vmalloc_get_userptr() the framevector is created with the 'write' argument set to false when vb2_create_framevec() is called for OUTPUT buffers. So the pages are marked as read-only. However, userspace will write to these buffers since it will fill in the data to output. Since get_userptr is only called if the userptr of the queued buffer has changed since the last time that same buffer was queued, this will fail when the buffer contents is updated and the buffer is queued again. E.g., userspace fills buffer 1 with the output video and queues it. The first time get_userptr is called and the pages are grabbed and pinned in memory and marked read-only. The second time buffer 1 is filled with different video data and queued again. Since the userptr hasn't changed the get_userptr() callback isn't called again. Since the pages were marked as read-only the new contents isn't updated. Just always call vb2_create_framevec() with FOLL_WRITE to always allow writing to the buffers. Using USERPTR streaming with OUTPUT devices is almost never done. And when it is done it is via v4l2-compliance and a driver like vim2m. But since v4l2-compliance doesn't actually inspect the capture buffer and compare it to the original output buffer, this issue was never noticed. But the vicodec driver actually needs to parse the bitstream in the OUTPUT buffers and any errors there will be immediately noticed. So this time v4l2-compliance failed the USERPTR streaming test. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-29media: pixfmt: Add H264 Slice formatMaxime Ripard1-0/+197
The H264_SLICE_RAW format is meant to hold the parsed slice data without the start code. This will be needed by stateless decoders. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-29media: uapi: Add H264 low-level decoder API compound controls.Pawel Osciak1-1/+12
Stateless video codecs will require both the H264 metadata and slices in order to be able to decode frames. This introduces the definitions for the structures used to pass the metadata from the userspace to the kernel. [hverkuil-cisco@xs4all.nl: add space after . in ".For"] [hverkuil-cisco@xs4all.nl: sync v4l2_ctrl_h264_decode_params struct layout with header] Co-developed-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Pawel Osciak <posciak@chromium.org> Signed-off-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-28media: cx25840: add pin to pad mapping and output format configurationMaciej S. Szmigiero1-1/+76
This commit adds pin to pad mapping and output format configuration support in CX2584x-series chips to cx25840 driver. This functionality is then used to allow disabling ivtv-specific hacks and configuration values (called a "generic mode"), so cx25840 driver can be used for other devices not needing them without risking compatibility problems. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-28media: cx25840: don't open-code cx25840_reset() inside cx25840_load_fw()Maciej S. Szmigiero1-11/+17
cx25840_load_fw() does the same thing as cx25840_reset(), only keeps "is_initialized" flag so any further invocation of this function besides the first one is a NOP. Let's just call cx25840_reset() directly from cx25840_load_fw() instead of open coding it there. While we are at it, let's also improve comments about cx25840_load_fw() so they are current and in the proper style (one of them even referred to a non-existing cx25840 init operation). Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-28Merge tag 'v5.2-rc2' into patchworkMauro Carvalho Chehab11-143/+11
Merge back from upstream into media tree, as there are some patches merged upstream that has pontential of causing conflicts (one actually rised a conflict already). Linux 5.2-rc2 * tag 'v5.2-rc2': (377 commits) Linux 5.2-rc2 random: fix soft lockup when trying to read from an uninitialized blocking pool tracing: Silence GCC 9 array bounds warning ext4: fix dcache lookup of !casefolded directories locking/lock_events: Use this_cpu_add() when necessary KVM: x86: fix return value for reserved EFER tools/kvm_stat: fix fields filter for child events KVM: selftests: Wrap vcpu_nested_state_get/set functions with x86 guard kvm: selftests: aarch64: compile with warnings on kvm: selftests: aarch64: fix default vm mode kvm: selftests: aarch64: dirty_log_test: fix unaligned memslot size KVM: s390: fix memory slot handling for KVM_SET_USER_MEMORY_REGION KVM: x86/pmu: do not mask the value that is written to fixed PMUs KVM: x86/pmu: mask the result of rdpmc according to the width of the counters x86/kvm/pmu: Set AMD's virt PMU version to 1 KVM: x86: do not spam dmesg with VMCS/VMCB dumps kvm: Check irqchip mode before assign irqfd kvm: svm/avic: fix off-by-one in checking host APIC ID KVM: selftests: do not blindly clobber registers in guest asm KVM: selftests: Remove duplicated TEST_ASSERT in hyperv_cpuid.c ...
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61Thomas Gleixner11-143/+11
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 441 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-23media: videobuf2-core.h: Document the alloc memop size argument as page alignedSakari Ailus1-1/+2
The size argument of the alloc memop, which allocates buffer memory, is page aligned. Document it as such in the only caller as well as ops documentation. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-16Merge tag 'media/v5.2-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "Some fixes for some platform drivers (rockchip, atmel, omap, daVinci, tegra-cec, coda and rcar). Also includes a fix on one of the V4L2 uAPI doc, explaining a border case" * tag 'media/v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: rockchip/vpu: Fix/re-order probe-error/remove path media: rockchip/vpu: Initialize mdev->bus_info media: rockchip/vpu: Get vdev from the file arg in vidioc_querycap() media: rockchip/vpu: Add missing dont_use_autosuspend() calls media: rockchip/vpu: Do not request id 0 for our video device media: tegra-cec: fix cec_notifier_parse_hdmi_phandle return check media: davinci/vpbe: array underflow in vpbe_enum_outputs() media: field-order.rst: clarify FIELD_ANY and FIELD_NONE media: staging/imx: add media device to capture register media: rcar-csi2: Propagate the FLD signal for NTSC and PAL media: rcar-csi2: restart CSI-2 link if error is detected media: omap_vout: potential buffer overflow in vidioc_dqbuf() media: coda: fix unset field and fail on invalid field in buf_prepare media: atmel: atmel-isc: fix asd memory allocation media: atmel: atmel-isc: fix INIT_WORK misplacement media: atmel: atmel-isc: limit incoming pixels per frame
2019-05-09Merge tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-1/+18
Pull drm updates from Dave Airlie: "This has two exciting community drivers for ARM Mali accelerators. Since ARM has never been open source friendly on the GPU side of the house, the community has had to create open source drivers for the Mali GPUs. Lima covers the older t4xx and panfrost the newer 6xx/7xx series. Well done to all involved and hopefully this will help ARM head in the right direction. There is also now the ability if you don't have any of the legacy drivers enabled (pre-KMS) to remove all the pre-KMS support code from the core drm, this saves 10% or so in codesize on my machine. i915 also enable Icelake/Elkhart Lake Gen11 GPUs by default, vboxvideo moves out of staging. There are also some rcar-du patches which crossover with media tree but all should be acked by Mauro. Summary: uapi changes: - Colorspace connector property - fourcc - new YUV formts - timeline sync objects initially merged - expose FB_DAMAGE_CLIPS to atomic userspace new drivers: - vboxvideo: moved out of staging - aspeed: ASPEED SoC BMC chip display support - lima: ARM Mali4xx GPU acceleration driver support - panfrost: ARM Mali6xx/7xx Midgard/Bitfrost acceleration driver support core: - component helper docs - unplugging fixes - devm device init - MIPI/DSI rate control - shmem backed gem objects - connector, display_info, edid_quirks cleanups - dma_buf fence chain support - 64-bit dma-fence seqno comparison fixes - move initial fb config code to core - gem fence array helpers for Lima - ability to remove legacy support code if no drivers requires it (removes 10% of drm.ko size) - lease fixes ttm: - unified DRM_FILE_PAGE_OFFSET handling - Account for kernel allocations in kernel zone only panel: - OSD070T1718-19TS panel support - panel-tpo-td028ttec1 backlight support - Ronbo RB070D30 MIPI/DSI - Feiyang FY07024DI26A30-D MIPI-DSI panel - Rocktech jh057n00900 MIPI-DSI panel i915: - Comet Lake (Gen9) PCI IDs - Updated Icelake PCI IDs - Elkhartlake (Gen11) support - DP MST property addtions - plane and watermark fixes - Icelake port sync and VEBOX disable fixes - struct_mutex usage reduction - Icelake gamma fix - GuC reset fixes - make mmap more asynchronous - sound display power well race fixes - DDI/MIPI-DSI clocks for Icelake - Icelake RPS frequency changing support - Icelake workarounds amdgpu: - Use HMM for userptr - vega20 experimental smu11 support - RAS support for vega20 - BACO support for vega12 + fixes for vega20 - reworked IH interrupt handling - amdkfd RAS support - Freesync improvements - initial timeline sync object support - DC Z ordering fixes - NV12 planes support - colorspace properties for planes= - eDP opts if eDP already initialized nouveau: - misc fixes etnaviv: - misc fixes msm: - GPU zap shader support expansion - robustness ABI addition exynos: - Logging cleanups tegra: - Shared reset fix - CPU cache maintenance fix cirrus: - driver rewritten using simple helpers meson: - G12A support vmwgfx: - Resource dirtying management improvements - Userspace logging improvements virtio: - PRIME fixes rockchip: - rk3066 hdmi support sun4i: - DSI burst mode support vc4: - load tracker to detect underflow v3d: - v3d v4.2 support malidp: - initial Mali D71 support in komeda driver tfp410: - omap related improvement omapdrm: - drm bridge/panel support - drop some omap specific panels rcar-du: - Display writeback support" * tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm: (1507 commits) drm/msm/a6xx: No zap shader is not an error drm/cma-helper: Fix drm_gem_cma_free_object() drm: Fix timestamp docs for variable refresh properties. drm/komeda: Mark the local functions as static drm/komeda: Fixed warning: Function parameter or member not described drm/komeda: Expose bus_width to Komeda-CORE drm/komeda: Add sysfs attribute: core_id and config_id drm: add non-desktop quirk for Valve HMDs drm/panfrost: Show stored feature registers drm/panfrost: Don't scream about deferred probe drm/panfrost: Disable PM on probe failure drm/panfrost: Set DMA masks earlier drm/panfrost: Add sanity checks to submit IOCTL drm/etnaviv: initialize idle mask before querying the HW db drm: introduce a capability flag for syncobj timeline support drm: report consistent errors when checking syncobj capibility drm/nouveau/nouveau: forward error generated while resuming objects tree drm/nouveau/fb/ramgk104: fix spelling mistake "sucessfully" -> "successfully" drm/nouveau/i2c: Disable i2c bus access after ->fini() drm/nouveau: Remove duplicate ACPI_VIDEO_NOTIFY_PROBE definition ...
2019-05-08media: davinci/vpbe: array underflow in vpbe_enum_outputs()Dan Carpenter1-1/+1
In vpbe_enum_outputs() we check if (temp_index >= cfg->num_outputs) but the problem is that "temp_index" can be negative. This patch changes the types to unsigned to address this array underflow bug. Fixes: 66715cdc3224 ("[media] davinci vpbe: VPBE display driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: "Lad, Prabhakar" <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22media: cec-notifier: add cec_notifier_parse_hdmi_phandle helperHans Verkuil1-1/+18
Add helper function to parse the DT for the hdmi-phandle property and return the corresponding struct device pointer. It takes care to avoid increasing the device refcount since all we need is the device pointer. This pointer is used in the notifier list as a key, but it is never accessed by the CEC driver. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: Wen Yang <wen.yang99@zte.com.cn> Acked-by: Wen Yang <wen.yang99@zte.com.cn> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22media: rc: xbox_remote: add protocol and set timeoutMatthias Reichl1-1/+3
The timestamps in ir-keytable -t output showed that the Xbox DVD IR dongle decodes scancodes every 64ms. The last scancode of a longer button press is decodes 64ms after the last-but-one which indicates the decoder doesn't use a timeout but decodes on the last edge of the signal. 267.042629: lirc protocol(unknown): scancode = 0xace 267.042665: event type EV_MSC(0x04): scancode = 0xace 267.042665: event type EV_KEY(0x01) key_down: KEY_1(0x0002) 267.042665: event type EV_SYN(0x00). 267.106625: lirc protocol(unknown): scancode = 0xace 267.106643: event type EV_MSC(0x04): scancode = 0xace 267.106643: event type EV_SYN(0x00). 267.170623: lirc protocol(unknown): scancode = 0xace 267.170638: event type EV_MSC(0x04): scancode = 0xace 267.170638: event type EV_SYN(0x00). 267.234621: lirc protocol(unknown): scancode = 0xace 267.234636: event type EV_MSC(0x04): scancode = 0xace 267.234636: event type EV_SYN(0x00). 267.298623: lirc protocol(unknown): scancode = 0xace 267.298638: event type EV_MSC(0x04): scancode = 0xace 267.298638: event type EV_SYN(0x00). 267.543345: event type EV_KEY(0x01) key_down: KEY_1(0x0002) 267.543345: event type EV_SYN(0x00). 267.570015: event type EV_KEY(0x01) key_up: KEY_1(0x0002) 267.570015: event type EV_SYN(0x00). Add a protocol with the repeat value and set the timeout in the driver to 10ms (to have a bit of headroom for delays) so the Xbox DVD remote performs more responsive. Signed-off-by: Matthias Reichl <hias@horus.com> Acked-by: Benjamin Valentin <benpicco@googlemail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22media: vb2: add waiting_in_dqbuf flagHans Verkuil1-0/+1
Calling VIDIOC_DQBUF can release the core serialization lock pointed to by vb2_queue->lock if it has to wait for a new buffer to arrive. However, if userspace dup()ped the video device filehandle, then it is possible to read or call DQBUF from two filehandles at the same time. It is also possible to call REQBUFS from one filehandle while the other is waiting for a buffer. This will remove all the buffers and reallocate new ones. Removing all the buffers isn't the problem here (that's already handled correctly by DQBUF), but the reallocating part is: DQBUF isn't aware that the buffers have changed. This is fixed by setting a flag whenever the lock is released while waiting for a buffer to arrive. And checking the flag where needed so we can return -EBUSY. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reported-by: Syzbot <syzbot+4180ff9ca6810b06c1e9@syzkaller.appspotmail.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22media: Media Device Allocator APIShuah Khan1-0/+63
Media Device Allocator API to allows multiple drivers share a media device. This API solves a very common use-case for media devices where one physical device (an USB stick) provides both audio and video. When such media device exposes a standard USB Audio class, a proprietary Video class, two or more independent drivers will share a single physical USB bridge. In such cases, it is necessary to coordinate access to the shared resource. Using this API, drivers can allocate a media device with the shared struct device as the key. Once the media device is allocated by a driver, other drivers can get a reference to it. The media device is released when all the references are released. Signed-off-by: Shuah Khan <shuah@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22media: Introduce helpers to fill pixel format structsEzequiel Garcia1-0/+33
Add two new API helpers, v4l2_fill_pixfmt and v4l2_fill_pixfmt_mp, to be used by drivers to calculate plane sizes and bytes per lines. Note that driver-specific padding and alignment are not taken into account, and must be done by drivers using this API. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22media: v4l2-ctrls.h: remove spurious textHans Verkuil1-2/+2
Somehow the string "Controls name" got pasted in two places where it doesn't belong. Remove that text. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-25media: vicodec: Introducing stateless fwht defs and structsDafna Hirschfeld2-1/+35
Add structs and definitions needed to implement stateless decoder for fwht and add I/P-frames QP controls to the public api. Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-25media: v4l2-ctrl: v4l2_ctrl_request_setup returns with error upon failureDafna Hirschfeld1-1/+1
If one of the controls fails to set, then 'v4l2_ctrl_request_setup' immediately returns with the error code. Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-25media: media requests: return EBADR instead of EACCESHans Verkuil1-2/+2
If requests are used when they shouldn't, or not used when they should, then return EBADR (Invalid request descriptor) instead of EACCES. The reason for this change is that EACCES has more to do with permissions (not being the owner of the resource), but in this case the request file descriptor is just wrong for the current mode of the device. Update the documentation accordingly. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-25media: vb2: add requires_requests bit for stateless codecsHans Verkuil1-0/+3
Stateless codecs require the use of the Request API as opposed of it being optional. So add a bit to indicate this and let vb2 check for this. If an attempt is made to queue a buffer without an associated request, then the EBADR error is returned to userspace. Doing this check in the vb2 core simplifies drivers, since they don't have to check for this, they can just set this flag. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-19media: dvb: Add support for the Avermedia TD310Jose Alberto Reguero1-0/+1
This patch add support for Avermedia TD310 usb stick. Signed-off-by: Jose Alberto Reguero <jose.alberto.reguero@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-19media: vb2: drop VB2_BUF_STATE_REQUEUEINGHans Verkuil1-15/+6
The last user of this state has been converted, so we can now drop this. Requeueing causes the queue to become unordered, which causes problems with requests and (in the future) fences. Since it is no longer needed, just get rid of this. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-19media: v4l2-subdev: handle module refcounting hereHans Verkuil2-24/+2
The module ownership refcounting was done in media_entity_get/put, but that was very confusing and it did not work either in case an application had a v4l-subdevX device open and the module was unbound. When the v4l-subdevX device was closed the media_entity_put was never called and the module refcount was left one too high, making it impossible to unload it. Since v4l2-subdev.c was the only place where media_entity_get/put was called, just move the functionality to v4l2-subdev.c and drop those confusing entity functions. Store the module in subdev_fh so module_put no longer depends on the media_entity struct. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-19media: v4l2-subdev: add release() internal opHans Verkuil1-1/+12
If the subdevice created a device node, then the v4l2_subdev cannot be freed until the last user of the device node closes it. This means that we need a release() callback in v4l2_subdev_internal_ops that is called from the video_device release function so the subdevice driver can postpone freeing memory until the that callback is called. If no video device node was created then the release callback can be called immediately when the subdev is unregistered. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-18media: vsp1: drm: Implement writeback supportLaurent Pinchart1-0/+15
Extend the vsp1_du_atomic_flush() API with writeback support by adding format, pitch and memory addresses of the writeback framebuffer. Writeback completion is reported through the existing frame completion callback with a new VSP1_DU_STATUS_WRITEBACK status flag. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>