summaryrefslogtreecommitdiff
path: root/include/net/cfg80211.h
AgeCommit message (Collapse)AuthorFilesLines
2013-08-01cfg80211.h/mac80211.h: Remove extern from function prototypesJoe Perches1-17/+17
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Reflow modified prototypes to 80 columns. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19cfg80211: require passing BSS struct back to cfg80211_assoc_timeoutJohannes Berg1-8/+8
Doing so will allow us to hold the BSS (not just ref it) over the association process, thus ensuring that it doesn't time out and gets invisible to the user (e.g. in 'iw wlan0 link'.) This also fixes a leak in mac80211 where it doesn't always release the BSS struct properly in all cases where calling this function. This leak was reported by Ben Greear. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-18nl80211: add rate flags for 5/10 Mhz channelsSimon Wunderlich1-0/+28
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-18nl80211/cfg80211: add 5 and 10 MHz defines and wiphy flagSimon Wunderlich1-0/+2
Add defines for 5 and 10 MHz channel width and fix channel handling functions accordingly. Also check for and report the WIPHY_FLAG_SUPPORTS_5_10_MHZ capability. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> [fix spelling in comment] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-11{nl,mac,cfg}80211: Allow user to configure basic rates for meshAshok Nagarajan1-0/+2
Currently mesh uses mandatory rates as the default basic rates. Allow basic rates to be configured during mesh join. Basic rates are applied only if channel is also provided with mesh join command. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> [some whitespace fixes, refuse basic rates w/o channel] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-11{nl,cfg}80211: make peer link expiration time configurableColleen Twitty1-0/+4
If a STA has a peer that it hasn't seen any tx activity from for a certain length of time, the peer link is expired. This means the inactive STA is removed from the list of peers and that STA is not considered a peer again unless it re-peers. Previously, this inactivity time was always 30 minutes. Now, add it to the mesh configuration and allow it to be configured. Retain 30 minutes as a default value. Signed-off-by: Colleen Twitty <colleen@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-05wireless: fix kernel-docJohannes Berg1-1/+10
Some kernel-doc fixes for forgotten fields and renamed things. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-04cfg80211: separate internal SME implementationJohannes Berg1-5/+0
The current internal SME implementation in cfg80211 is very mixed up with the MLME handling, which has been causing issues for a long time. There are three things that the implementation has to provide: * a basic SME implementation for nl80211's connect() call (for drivers implementing auth/assoc, which is really just mac80211) and wireless extensions * MLME events for the userspace SME * SME events (connected, disconnected etc.) for all different SME implementation possibilities (driver, cfg80211 and userspace) To achieve these goals it isn't necessary to track the software SME's connection status outside of it's state (which is the part that caused many issues.) Instead, track it only in the SME data (wdev->conn) and in the general case only track whether the wdev is connected or not (via wdev->current_bss.) Also separate the internal implementation to not have callbacks from the SME events, but rather call it from the API functions that the driver (or rather mac80211) calls. This separates the code better. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-04cfg80211/mac80211: clean up cfg80211 SME APIsJohannes Berg1-55/+36
Do some cleanups in the cfg80211 SME APIs, which are only used by mac80211. Most of these functions get a frame passed, and there isn't really any reason to export multiple functions as cfg80211 can check the frame type instead, do that. Additionally, the API functions have confusing names like cfg80211_send_...() which was meant to indicate that it sends an event to userspace, but gets a bit confusing when there's both TX and RX and they're not all clearly labeled. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-03cfg80211: take WoWLAN support information out of wiphy structJohannes Berg1-1/+1
There's no need to take up the space for devices that don't support WoWLAN, and most drivers can even make the support data static const (except where it's modified at runtime.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-29cfg80211: remove cleanup_work kernel-docJohannes Berg1-1/+0
I evidently forgot this when removing the work itself. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-29cfg80211: support an active monitor interface flagFelix Fietkau1-0/+2
An active monitor interface is one that is used for communication (via injection). It is expected to ACK incoming unicast packets. This is useful for running various 802.11 testing utilities that associate to an AP via injection and manage the state in user space. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-27cfg80211: make WoWLAN configuration available to driversJohannes Berg1-0/+4
Make the current WoWLAN configuration available to drivers at runtime. This isn't really useful for the normal WoWLAN behaviour and accessing it can also be racy, but drivers may use it for testing the WoWLAN device behaviour while the host stays up & running to observe the device. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-25cfg80211/mac80211: use cfg80211 wdev mutex in mac80211Johannes Berg1-28/+23
Using separate locks in cfg80211 and mac80211 has always caused issues, for example having to unlock in places in mac80211 to call cfg80211, which even needed a framework to make cfg80211 calls after some functions returned etc. Additionally, I suspect some issues people have reported with the cfg80211 state getting confused could be due to such issues, when cfg80211 is asking mac80211 to change state but mac80211 is in the process of telling cfg80211 that the state changed (in another way.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-25cfg80211: vastly simplify lockingJohannes Berg1-3/+2
Virtually all code paths in cfg80211 already (need to) hold the RTNL. As such, there's little point in having another four mutexes for various parts of the code, they just cause lock ordering issues (and much of the time, the RTNL and a few of the others need thus be held.) Simplify all this by getting rid of the extra four mutexes and just use the RTNL throughout. Only a few code changes were needed to do this and we can get rid of a work struct for bonus points. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-25{cfg,mac}80211: move mandatory rates calculation to cfg80211Ashok Nagarajan1-0/+9
Move mandatory rates calculation to cfg80211, shared with non mac80211 drivers. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> [extend documentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-17cfg80211: Userspace may inform kernel of mesh auth method.Colleen Twitty1-0/+2
Authentication takes place in userspace, but the beacon is generated in the kernel. Allow userspace to inform the kernel of the authentication method so the appropriate mesh config IE can be set prior to beacon generation when joining the MBSS. Signed-off-by: Colleen Twitty <colleen@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-17wireless: fix kerneldoc content in *80211.h files.Robert P. J. Day1-0/+1
Make kerneldoc content match header file content, no functional change. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-17cfg80211: add support for per-chain signal strength reportingFelix Fietkau1-0/+14
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-22cfg80211: introduce critical protocol indication from user-spaceArend van Spriel1-0/+23
Some protocols need a more reliable connection to complete successful in reasonable time. This patch adds a user-space API to indicate the wireless driver that a critical protocol is about to commence and when it is done, using nl80211 primitives NL80211_CMD_CRIT_PROTOCOL_START and NL80211_CRIT_PROTOCOL_STOP. There can be only on critical protocol session started per registered cfg80211 device. The driver can support this by implementing the cfg80211 callbacks .crit_proto_start() and .crit_proto_stop(). Examples of protocols that can benefit from this are DHCP, EAPOL, APIPA. Exactly how the link can/should be made more reliable is up to the driver. Things to consider are avoid scanning, no multi-channel operations, and alter coexistence schemes. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-16cfg80211: add ieee80211_operating_class_to_bandJohannes Berg1-0/+11
This function converts a (global only!) operating class to an internal band identifier. This will be needed for extended channel switch support. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-25cfg80211: Document update_ft_ies() cfg80211_opsJouni Malinen1-0/+4
This was forgotten from the commit that added support for FT operations with drivers that implement SME. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06cfg80211: rename mesh station typesThomas Pedersen1-4/+4
The mesh station types used to refer to whether the station was secure or nonsecure. Really the salient information is whether it is managed by the kernel or userspace Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06nl80211: explicit userspace MPMThomas Pedersen1-0/+2
Secure mesh had the implicit requirement that the Mesh Peering Management entity be in userspace. However userspace might want to implement an open MPM as well, so specify a mesh setup parameter to indicate this. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06cfg80211: Extend support for IEEE 802.11r Fast BSS TransitionJouni Malinen1-0/+41
Add NL80211_CMD_UPDATE_FT_IES to support update of FT IEs to the WLAN driver and NL80211_CMD_FT_EVENT to send FT events from the WLAN driver. This will carry the target AP's MAC address along with the relevant Information Elements. This event is used to report received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE). These changes allow FT to be supported with drivers that use an internal SME instead of user space option (like FT implementation in wpa_supplicant with mac80211-based drivers). Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06cfg80211: add ability to override VHT capabilitiesJohannes Berg1-0/+12
For testing it's sometimes useful to be able to override certain VHT capability advertisement, add the ability to do that in cfg80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06cfg80211: comprehensively check station changesJohannes Berg1-3/+45
The station change API isn't being checked properly before drivers are called, and as a result it is difficult to see what should be allowed and what not. In order to comprehensively check the API parameters parse everything first, and then have the driver call a function (cfg80211_check_station_change()) with the additionally information about the kind of station that is being changed; this allows the function to make better decisions than the old code could. While at it, also add a few checks, particularly in mesh and clarify the TDLS station lifetime in documentation. To be able to reduce a few checks, ignore any flag set bits when the mask isn't set, they shouldn't be applied then. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06cfg80211: constify station parameter pointersJohannes Berg1-4/+4
All the pointers point right into the skb data and not to anything that would be useful to change, so make them const. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06cfg80211: clean up mesh plink station change APIJohannes Berg1-13/+2
Make the ability to leave the plink_state unchanged not use a magic -1 variable that isn't in the enum, but an explicit change flag; reject invalid plink states or actions and move the needed constants for plink actions to the right header file. Also reject plink_state changes for non-mesh interfaces. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18Merge branch 'master' of ↵John W. Linville1-21/+205
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/iwlwifi/dvm/tx.c drivers/net/wireless/ti/wlcore/sdio.c drivers/net/wireless/ti/wlcore/spi.c
2013-02-15cfg80211: Pass station (extended) capability info to kernelJouni Malinen1-0/+8
The information of the peer's capabilities and extended capabilities are required for the driver to perform TDLS Peer UAPSD operations and off channel operations. This information of the peer is passed from user space using NL80211_CMD_SET_STATION command. This commit enhances the function nl80211_set_station to pass the capability information of the peer to the driver. Similarly, there may be need for capability information for other modes, so allow this to be provided with both add_station and change_station. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15cfg80211: advertise extended capabilities to userspaceJohannes Berg1-0/+11
In many cases, userspace may need to know which of the 802.11 extended capabilities ("Extended Capabilities element") are implemented in the driver or device, to include them e.g. in beacons, assoc request/response or other frames. Add a new nl80211 attribute to hold the extended capabilities bitmap for this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15cfg80211: allow drivers to selectively disable 80/160 MHzJohannes Berg1-0/+12
Some drivers might support 80 or 160 MHz only on some channels for whatever reason, so allow them to disable these channel widths. Also maintain the new flags when regulatory bandwidth limitations would disable these wide channels. Reviewed-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15nl80211/cfg80211: add radar detection command/eventSimon Wunderlich1-0/+46
Add new NL80211_CMD_RADAR_DETECT, which starts the Channel Availability Check (CAC). This command will also notify the usermode about events (CAC finished, CAC aborted, radar detected, NOP finished). Once radar detection has started it should continuously monitor for radars as long as the channel is active. This patch enables DFS for AP mode in nl80211/cfg80211. Based on original patch by Victor Goldenshtein <victorg@ti.com> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> [remove WIPHY_FLAG_HAS_RADAR_DETECT again -- my mistake] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-13cfg80211: configuration for WoWLAN over TCPJohannes Berg1-1/+54
Intel Wireless devices are able to make a TCP connection after suspending, sending some data and waking up when the connection receives wakeup data (or breaks). Add the WoWLAN configuration and feature advertising API for it. Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-13nl80211: add packet offset information for wowlan patternAmitkumar Karwar1-0/+4
If user knows the location of a wowlan pattern to be matched in Rx packet, he can provide an offset with the pattern. This will help drivers to ignore initial bytes and match the pattern efficiently. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> [refactor pattern sending] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11cfg80211: move TSF into IEsJohannes Berg1-3/+2
While technically the TSF isn't an IE, it can be necessary to distinguish between the TSF from a beacon and a probe response, in particular in order to know the next DTIM TBTT, as not all APs are spec compliant wrt. TSF==0 being a DTIM TBTT and thus the DTIM count needs to be taken into account as well. To allow this, move the TSF into the IE struct so it can be known whence it came. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11cfg80211: remove scan ies NULL checkJohannes Berg1-4/+4
There's no way scan BSS IEs can be NULL as even if the allocation fails the frame is discarded. Remove some code checking for this and document that it is always non-NULL. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11cfg80211: track hidden SSID networks properlyJohannes Berg1-0/+9
Currently, cfg80211 will copy beacon IEs from a previously received hidden SSID beacon to a probe response entry, if that entry is created after the beacon entry. However, if it is the other way around, or if the beacon is updated, such changes aren't propagated. Fix this by tracking the relation between the probe response and beacon BSS structs in this case. In case drivers have private data stored in a BSS struct and need access to such data from a beacon entry, cfg80211 now provides the hidden_beacon_bss pointer from the probe response entry to the beacon entry. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11wireless: fix kernel-docJohannes Berg1-4/+6
Fix most kernel-doc warnings, for some reason it seems to have issues with __aligned, don't remove the documentation entries it considers to be in excess due to that. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11cfg80211: pass wiphy to cfg80211_ref_bss/put_bssJohannes Berg1-2/+4
This prepares for using the spinlock instead of krefs which is needed in the next patch to track the refs of combined BSSes correctly. Acked-by: Bing Zhao <bzhao@marvell.com> [mwifiex] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-08Merge branch 'master' of ↵John W. Linville1-4/+38
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-02-04cfg80211: remove unused cfg80211_get_meshJohannes Berg1-4/+0
As Thomas pointed out, cfg80211_get_mesh() is unused and can be removed. Cc: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-04cfg80211: expand per-station byte counters to 64bitVladimir Kondratiev1-4/+8
In per-station statistics, present 32bit counters are too small for practical purposes - with gigabit speeds, it get overlapped every few seconds. Expand counters in the struct station_info to be 64-bit. Driver can still fill only 32-bit and indicate in @filled only bits like STATION_INFO_[TR]X_BYTES; in case driver provides full 64-bit counter, it should also set in @filled bit STATION_INFO_[TR]RX_BYTES64 Netlink sends both 32-bit and 64-bit counters, if present, to not break userspace. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> [change to also have 32-bit counters if driver advertises 64-bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-31cfg80211: remove free_priv BSS APIJohannes Berg1-3/+0
Now that mac80211 no longer uses this API, remove it completely. If anyone needs it again, we can revert this patch of course, but mac80211 was the only user right now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-31cfg80211/mac80211: support reporting wakeup reasonJohannes Berg1-0/+41
When waking up from WoWLAN, it is useful to know what triggered the wakeup. Support reporting the wakeup reason(s) in cfg80211 (and a pass-through in mac80211) to allow userspace to know. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-28Merge branch 'master' of ↵John W. Linville1-79/+133
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-01-25cfg80211/nl80211: add API for MAC address ACLsVasanthakumar Thiagarajan1-0/+34
Add API to enable drivers to implement MAC address based access control in AP/P2P GO mode. Capable drivers advertise this capability by setting the maximum number of MAC addresses in such a list in wiphy->max_acl_mac_addrs. An initial ACL may be given to the NL80211_CMD_START_AP command and/or changed later with NL80211_CMD_SET_MAC_ACL. Black- and whitelists are supported, but not simultaneously. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> [rewrite commit log, many cleanups] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-25cfg80211: Move the definition of struct mac_address upVasanthakumar Thiagarajan1-4/+4
struct mac_address will be used by ACL related configuration ops. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-17cfg80211: check radar interface combinationsSimon Wunderlich1-0/+2
To ease further DFS development regarding interface combinations, use the interface combinations structure to test for radar capabilities. Drivers can specify which channel widths they support, and in which modes. Right now only a single AP interface is allowed, but as the DFS code evolves other combinations can be enabled. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-19 19:36:51 +0300