summaryrefslogtreecommitdiff
path: root/include/net/dst_metadata.h
AgeCommit message (Collapse)AuthorFilesLines
2017-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-10bpf: don't rely on the verifier lock for metadata_dst allocationJakub Kicinski1-0/+1
bpf_skb_set_tunnel_*() functions require allocation of per-cpu metadata_dst. The allocation happens upon verification of the first program using those helpers. In preparation for removing the verifier lock, use cmpxchg() to make sure we only allocate the metadata_dsts once. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02net/dst: Make skb parameter of skb{metadata_dst, tunnel_info}() constSimon Horman1-2/+3
Make the skb parameter of skb_metadata_dst() and skb_tunnel_info() const as they are not modified. This is in preparation for using them in call-sites where skb is const. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-25net: store port/representator id in metadata_dstJakub Kicinski1-9/+32
Switches and modern SR-IOV enabled NICs may multiplex traffic from Port representators and control messages over single set of hardware queues. Control messages and muxed traffic may need ordered delivery. Those requirements make it hard to comfortably use TC infrastructure today unless we have a way of attaching metadata to skbs at the upper device. Because single set of queues is used for many netdevs stopping TC/sched queues of all of them reliably is impossible and lower device has to retreat to returning NETDEV_TX_BUSY and usually has to take extra locks on the fastpath. This patch attempts to enable port/representative devs to attach metadata to skbs which carry port id. This way representatives can be queueless and all queuing can be performed at the lower netdev in the usual way. Traffic arriving on the port/representative interfaces will be have metadata attached and will subsequently be queued to the lower device for transmission. The lower device should recognize the metadata and translate it to HW specific format which is most likely either a special header inserted before the network headers or descriptor/metadata fields. Metadata is associated with the lower device by storing the netdev pointer along with port id so that if TC decides to redirect or mirror the new netdev will not try to interpret it. This is mostly for SR-IOV devices since switches don't have lower netdevs today. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09net/dst: Add dst port to dst_metadata utility functionsHadar Hen Zion1-4/+6
Add dst port parameter to __ip_tun_set_dst and __ipv6_tun_set_dst utility functions. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-11net/dst: Utility functions to build dst_metadata without supplying an skbAmir Vadai1-13/+39
Extract __ip_tun_set_dst() and __ipv6_tun_set_dst() out of ip_tun_rx_dst() and ipv6_tun_rx_dst(), to be used without supplying an skb. Signed-off-by: Amir Vadai <amir@vadai.me> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11ip_tunnel: add support for setting flow label via collect metadataDaniel Borkmann1-1/+4
This patch extends udp_tunnel6_xmit_skb() to pass in the IPv6 flow label from call sites. Currently, there's no such option and it's always set to zero when writing ip6_flow_hdr(). Add a label member to ip_tunnel_key, so that flow-based tunnels via collect metadata frontends can make use of it. vxlan and geneve will be converted to add flow label support separately. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17net: add dst_cache to ovs vxlan lwtunnelPaolo Abeni1-0/+1
In case of UDP traffic with datagram length below MTU this give about 2% performance increase when tunneling over ipv4 and about 60% when tunneling over ipv6 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Suggested-and-acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21gro: Make GRO aware of lightweight tunnels.Jesse Gross1-0/+18
GRO is currently not aware of tunnel metadata generated by lightweight tunnels and stored in the dst. This leads to two possible problems: * Incorrectly merging two frames that have different metadata. * Leaking of allocated metadata from merged frames. This avoids those problems by comparing the tunnel information before merging, similar to how we handle other metadata (such as vlan tags), and releasing any state when we are done. Reported-by: John <john.phillips5@hpe.com> Fixes: 2e15ea39 ("ip_gre: Add support to collect tunnel metadata.") Signed-off-by: Jesse Gross <jesse@kernel.org> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-05tun_dst: Fix potential NULL dereferenceTobias Klauser1-1/+2
In tun_dst_unclone() the return value of skb_metadata_dst() is checked for being NULL after it is dereferenced. Fix this by moving the dereference after the NULL check. Found by the Coverity scanner (CID 1338068). Fixes: fc4099f17240 ("openvswitch: Fix egress tunnel info.") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-23openvswitch: Fix egress tunnel info.Pravin B Shelar1-0/+32
While transitioning to netdev based vport we broke OVS feature which allows user to retrieve tunnel packet egress information for lwtunnel devices. Following patch fixes it by introducing ndo operation to get the tunnel egress info. Same ndo operation can be used for lwtunnel devices and compat ovs-tnl-vport devices. So after adding such device operation we can remove similar operation from ovs-vport. Fixes: 614732eaa12d ("openvswitch: Use regular VXLAN net_device device"). Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01tun_dst: Remove opts_sizePravin B Shelar1-1/+0
opts_size is only written and never read. Following patch removes this unused variable. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31ip-tunnel: Use API to access tunnel metadata options.Pravin B Shelar1-17/+14
Currently tun-info options pointer is used in few cases to pass options around. But tunnel options can be accessed using ip_tunnel_info_opts() API without using the pointer. Following patch removes the redundant pointer and consistently make use of API. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Reviewed-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29ip_tunnels: record IP version in tunnel infoJiri Benc1-0/+1
There's currently nothing preventing directing packets with IPv6 encapsulation data to IPv4 tunnels (and vice versa). If this happens, IPv6 addresses are incorrectly interpreted as IPv4 ones. Track whether the given ip_tunnel_key contains IPv4 or IPv6 data. Store this in ip_tunnel_info. Reject packets at appropriate places if they are supposed to be encapsulated into an incompatible protocol. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29ip_tunnels: convert the mode field of ip_tunnel_info to flagsJiri Benc1-1/+0
The mode field holds a single bit of information only (whether the ip_tunnel_info struct is for rx or tx). Change the mode field to bit flags. This allows more mode flags to be added. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28tunnel: introduce udp_tun_rx_dst()Pravin B Shelar1-0/+61
Introduce function udp_tun_rx_dst() to initialize tunnel dst on receive path. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21route: move lwtunnel state to dst_entryJiri Benc1-10/+5
Currently, the lwtunnel state resides in per-protocol data. This is a problem if we encapsulate ipv6 traffic in an ipv4 tunnel (or vice versa). The xmit function of the tunnel does not know whether the packet has been routed to it by ipv4 or ipv6, yet it needs the lwtstate data. Moving the lwtstate data to dst_entry makes such inter-protocol tunneling possible. As a bonus, this brings a nice diffstat. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-01bpf: add helpers to access tunnel metadataAlexei Starovoitov1-0/+1
Introduce helpers to let eBPF programs attached to TC manipulate tunnel metadata: bpf_skb_[gs]et_tunnel_key(skb, key, size, flags) skb: pointer to skb key: pointer to 'struct bpf_tunnel_key' size: size of 'struct bpf_tunnel_key' flags: room for future extensions First eBPF program that uses these helpers will allocate per_cpu metadata_dst structures that will be used on TX. On RX metadata_dst is allocated by tunnel driver. Typical usage for TX: struct bpf_tunnel_key tkey; ... populate tkey ... bpf_skb_set_tunnel_key(skb, &tkey, sizeof(tkey), 0); bpf_clone_redirect(skb, vxlan_dev_ifindex, 0); RX: struct bpf_tunnel_key tkey = {}; bpf_skb_get_tunnel_key(skb, &tkey, sizeof(tkey), 0); ... lookup or redirect based on tkey ... 'struct bpf_tunnel_key' will be extended in the future by adding elements to the end and the 'size' argument will indicate which fields are populated, thereby keeping backwards compatibility. The 'flags' argument may be used as well when the 'size' is not enough or to indicate completely different layout of bpf_tunnel_key. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21route: Per route IP tunnel metadata via lightweight tunnelThomas Graf1-1/+11
This introduces a new IP tunnel lightweight tunnel type which allows to specify IP tunnel instructions per route. Only IPv4 is supported at this point. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21vxlan: Flow based tunnelingThomas Graf1-0/+13
Allows putting a VXLAN device into a new flow-based mode in which skbs with a ip_tunnel_info dst metadata attached will be encapsulated according to the instructions stored in there with the VXLAN device defaults taken into consideration. Similar on the receive side, if the VXLAN_F_COLLECT_METADATA flag is set, the packet processing will populate a ip_tunnel_info struct for each packet received and attach it to the skb using the new metadata dst. The metadata structure will contain the outer header and tunnel header fields which have been stripped off. Layers further up in the stack such as routing, tc or netfitler can later match on these fields and perform forwarding. It is the responsibility of upper layers to ensure that the flag is set if the metadata is needed. The flag limits the additional cost of metadata collecting based on demand. This prepares the VXLAN device to be steered by the routing and other subsystems which allows to support encapsulation for a large number of tunnel endpoints and tunnel ids through a single net_device which improves the scalability. It also allows for OVS to leverage this mode which in turn allows for the removal of the OVS specific VXLAN code. Because the skb is currently scrubed in vxlan_rcv(), the attachment of the new dst metadata is postponed until after scrubing which requires the temporary addition of a new member to vxlan_metadata. This member is removed again in a later commit after the indirect VXLAN receive API has been removed. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21dst: Metadata destinationsThomas Graf1-0/+32
Introduces a new dst_metadata which enables to carry per packet metadata between forwarding and processing elements via the skb->dst pointer. The structure is set up to be a union. Thus, each separate type of metadata requires its own dst instance. If demand arises to carry multiple types of metadata concurrently, metadata dst entries can be made stackable. The metadata dst entry is refcnt'ed as expected for now but a non reference counted use is possible if the reference is forced before queueing the skb. In order to allow allocating dsts with variable length, the existing dst_alloc() is split into a dst_alloc() and dst_init() function. The existing dst_init() function to initialize the subsystem is being renamed to dst_subsys_init() to make it clear what is what. The check before ip_route_input() is changed to ignore metadata dsts and drop the dst inside the routing function thus allowing to interpret metadata in a later commit. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>