summaryrefslogtreecommitdiff
path: root/include/net/ip6_route.h
AgeCommit message (Collapse)AuthorFilesLines
2018-10-16net: Add struct for fib dump filterDavid Ahern1-0/+1
Add struct fib_dump_filter for options on limiting which routes are returned in a dump request. The current list is table id, protocol, route type, rtm_flags and nexthop device index. struct net is needed to lookup the net_device from the index. Declare the filter for each route dump handler and plumb the new arguments from dump handlers to ip_valid_fib_dump_req. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-03net: remove 1 always zero parameter from ip6_redirect_no_header()Maciej Żenczykowski1-2/+1
(the parameter in question is mark) Signed-off-by: Maciej Żenczykowski <maze@google.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04net/ipv6: Revert attempt to simplify route replace and appendDavid Ahern1-0/+6
NetworkManager likes to manage linklocal prefix routes and does so with the NLM_F_APPEND flag, breaking attempts to simplify the IPv6 route code and by extension enable multipath routes with device only nexthops. Revert f34436a43092 and these followup patches: 6eba08c3626b ("ipv6: Only emit append events for appended routes"). ce45bded6435 ("mlxsw: spectrum_router: Align with new route replace logic") 53b562df8c20 ("mlxsw: spectrum_router: Allow appending to dev-only routes") Update the fib_tests cases to reflect the old behavior. Fixes: f34436a43092 ("net/ipv6: Simplify route replace and appending into multipath route") Signed-off-by: David Ahern <dsahern@gmail.com>
2018-05-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-0/+3
Alexei Starovoitov says: ==================== pull-request: bpf-next 2018-05-24 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Björn Töpel cleans up AF_XDP (removes rebind, explicit cache alignment from uapi, etc). 2) David Ahern adds mtu checks to bpf_ipv{4,6}_fib_lookup() helpers. 3) Jesper Dangaard Brouer adds bulking support to ndo_xdp_xmit. 4) Jiong Wang adds support for indirect and arithmetic shifts to NFP 5) Martin KaFai Lau cleans up BTF uapi and makes the btf_header extensible. 6) Mathieu Xhonneux adds an End.BPF action to seg6local with BPF helpers allowing to edit/grow/shrink a SRH and apply on a packet generic SRv6 actions. 7) Sandipan Das adds support for bpf2bpf function calls in ppc64 JIT. 8) Yonghong Song adds BPF_TASK_FD_QUERY command for introspection of tracing events. 9) other misc fixes from Gustavo A. R. Silva, Sirio Balmelli, John Fastabend, and Magnus Karlsson ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-22net/ipv6: Simplify route replace and appending into multipath routeDavid Ahern1-6/+0
Bring consistency to ipv6 route replace and append semantics. Remove rt6_qualify_for_ecmp which is just guess work. It fails in 2 cases: 1. can not replace a route with a reject route. Existing code appends a new route instead of replacing the existing one. 2. can not have a multipath route where a leg uses a dev only nexthop Existing use cases affected by this change: 1. adding a route with existing prefix and metric using NLM_F_CREATE without NLM_F_APPEND or NLM_F_EXCL (ie., what iproute2 calls 'prepend'). Existing code auto-determines that the new nexthop can be appended to an existing route to create a multipath route. This change breaks that by requiring the APPEND flag for the new route to be added to an existing one. Instead the prepend just adds another route entry. 2. route replace. Existing code replaces first matching multipath route if new route is multipath capable and fallback to first matching non-ECMP route (reject or dev only route) in case one isn't available. New behavior replaces first matching route. (Thanks to Ido for spotting this one) Note: Newer iproute2 is needed to display multipath routes with a dev-only nexthop. This is due to a bug in iproute2 and parsing nexthops. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-22net/ipv6: Add helper to return path MTU based on fib resultDavid Ahern1-0/+3
Determine path MTU from a FIB lookup result. Logic is based on ip6_dst_mtu_forward plus lookup of nexthop exception. Add ip6_dst_mtu_forward to ipv6_stubs to handle access by core bpf code. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller1-0/+21
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree, more relevant updates in this batch are: 1) Add Maglev support to IPVS. Moreover, store lastest server weight in IPVS since this is needed by maglev, patches from from Inju Song. 2) Preparation works to add iptables flowtable support, patches from Felix Fietkau. 3) Hand over flows back to conntrack slow path in case of TCP RST/FIN packet is seen via new teardown state, also from Felix. 4) Add support for extended netlink error reporting for nf_tables. 5) Support for larger timeouts that 23 days in nf_tables, patch from Florian Westphal. 6) Always set an upper limit to dynamic sets, also from Florian. 7) Allow number generator to make map lookups, from Laura Garcia. 8) Use hash_32() instead of opencode hashing in IPVS, from Vicent Bernat. 9) Extend ip6tables SRH match to support previous, next and last SID, from Ahmed Abdelsalam. 10) Move Passive OS fingerprint nf_osf.c, from Fernando Fernandez. 11) Expose nf_conntrack_max through ctnetlink, from Florent Fourcot. 12) Several housekeeping patches for xt_NFLOG, x_tables and ebtables, from Taehee Yoo. 13) Unify meta bridge with core nft_meta, then make nft_meta built-in. Make rt and exthdr built-in too, again from Florian. 14) Missing initialization of tbl->entries in IPVS, from Cong Wang. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-21ipv6: make ip6_dst_mtu_forward inlineFelix Fietkau1-0/+21
Just like ip_dst_mtu_maybe_forward(), to avoid a dependency with ipv6.ko. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-04-19net/ipv6: Remove compare of fib6_idev from rt6_duplicate_nexthopDavid Ahern1-1/+0
After 4832c30d5458 ("net: ipv6: put host and anycast routes on device with address") the comparison of idev does not add value since it correlates to the nexthop device which is already compared. Remove the idev comparison. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net/ipv6: Change ip6_route_get_saddr to get dev from routeDavid Ahern1-5/+6
Prior to 4832c30d5458 ("net: ipv6: put host and anycast routes on device with address") host routes and anycast routes were installed with the device set to loopback (or VRF device once that feature was added). In the older code dst.dev was set to loopback (needed for packet tx) and rt6i_idev was used to denote the actual interface. Commit 4832c30d5458 changed the code to have dst.dev pointing to the real device with the switch to lo or vrf device done on dst clones. As a consequence of this change ip6_route_get_saddr can just pass the nexthop device to ipv6_dev_get_saddr. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net/ipv6: Rename addrconf_dst_allocDavid Ahern1-1/+1
addrconf_dst_alloc now returns a fib6_info. Update the name and its users to reflect the change. Rename only; no functional change intended. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net/ipv6: Rename fib6_info struct elementsDavid Ahern1-13/+13
Change the prefix for fib6_info struct elements from rt6i_ to fib6_. rt6i_pcpu and rt6i_exception_bucket are left as is given that they point to rt6_info entries. Rename only; not functional change intended. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: Flip FIB entries to fib6_infoDavid Ahern1-14/+14
Convert all code paths referencing a FIB entry from rt6_info to fib6_info. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: separate handling of FIB entries from dst based routesDavid Ahern1-2/+1
Last step before flipping the data type for FIB entries: - use fib6_info_alloc to create FIB entries in ip6_route_info_create and addrconf_dst_alloc - use fib6_info_release in place of dst_release, ip6_rt_put and rt6_release - remove the dst_hold before calling __ip6_ins_rt or ip6_del_rt - when purging routes, drop per-cpu routes - replace inc and dec of rt6i_ref with fib6_info_hold and fib6_info_release - use rt->from since it points to the FIB entry - drop references to exception bucket, fib6_metrics and per-cpu from dst entries (those are relevant for fib entries only) Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: Cleanup exception and cache route handlingDavid Ahern1-1/+0
IPv6 FIB will only contain FIB entries with exception routes added to the FIB entry. Once this transformation is complete, FIB lookups will return a fib6_info with the lookup functions still returning a dst based rt6_info. The current code uses rt6_info for both paths and overloads the rt6_info variable usually called 'rt'. This patch introduces a new 'f6i' variable name for the result of the FIB lookup and keeps 'rt' as the dst based return variable. 'f6i' becomes a fib6_info in a later patch which is why it is introduced as f6i now; avoids the additional churn in the later patch. In addition, remove RTF_CACHE and dst checks from fib6 add and delete since they can not happen now and will never happen after the data type flip. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: Add gfp_flags to route add functionsDavid Ahern1-2/+4
Most FIB entries can be added using memory allocated with GFP_KERNEL. Add gfp_flags to ip6_route_add and addrconf_dst_alloc. Code paths that can be reached from the packet path (e.g., ndisc and autoconfig) or atomic notifiers use GFP_ATOMIC; paths from user context (adding addresses and routes) use GFP_KERNEL. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: Create a neigh_lookup for FIB entriesDavid Ahern1-0/+3
The router discovery code has a FIB entry and wants to validate the gateway has a neighbor entry. Refactor the existing dst_neigh_lookup for IPv6 and create a new function that takes the gateway and device and returns a neighbor entry. Use the new function in ndisc_router_discovery to validate the gateway. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: Move nexthop data to fib6_nhDavid Ahern1-3/+3
Introduce fib6_nh structure and move nexthop related data from rt6_info and rt6_info.dst to fib6_nh. References to dev, gateway or lwtstate from a FIB lookup perspective are converted to use fib6_nh; datapath references to dst version are left as is. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: Pass net namespace to route functionsDavid Ahern1-5/+7
Pass network namespace reference into route add, delete and get functions. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-04ipv6: add a wrapper for ip6_dst_store() with flowi6 checksAlexey Kodanev1-0/+3
Move commonly used pattern of ip6_dst_store() usage to a separate function - ip6_sk_dst_store_flow(), which will check the addresses for equality using the flow information, before saving them. There is no functional changes in this patch. In addition, it will be used in the next patch, in ip6_sk_dst_lookup_flow(). Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+3
Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04net/ipv6: Add support for path selection using hash of 5-tupleDavid Ahern1-2/+2
Some operators prefer IPv6 path selection to use a standard 5-tuple hash rather than just an L3 hash with the flow the label. To that end add support to IPv6 for multipath hash policy similar to bf4e0a3db97eb ("net: ipv4: add support for ECMP hash policy choice"). The default is still L3 which covers source and destination addresses along with flow label and IPv6 protocol. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04net/ipv6: Pass skb to route lookupDavid Ahern1-4/+7
IPv6 does path selection for multipath routes deep in the lookup functions. The next patch adds L4 hash option and needs the skb for the forward path. To get the skb to the relevant FIB lookup functions it needs to go through the fib rules layer, so add a lookup_data argument to the fib_lookup_arg struct. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01ipv6: route: dissect flow in input path if fib rules need itRoopa Prabhu1-1/+3
Dissect flow in fwd path if fib rules require it. Controlled by a flag to avoid penatly for the common case. Flag is set when fib rules with sport, dport and proto match that require flow dissect are installed. Also passes the dissected hash keys to the multipath hash function when applicable to avoid dissecting the flow again. icmp packets will continue to use inner header for hash calculations. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-16xfrm: reuse uncached_list to track xdstsXin Long1-0/+3
In early time, when freeing a xdst, it would be inserted into dst_garbage.list first. Then if it's refcnt was still held somewhere, later it would be put into dst_busy_list in dst_gc_task(). When one dev was being unregistered, the dev of these dsts in dst_busy_list would be set with loopback_dev and put this dev. So that this dev's removal wouldn't get blocked, and avoid the kmsg warning: kernel:unregister_netdevice: waiting for veth0 to become \ free. Usage count = 2 However after Commit 52df157f17e5 ("xfrm: take refcnt of dst when creating struct xfrm_dst bundle"), the xdst will not be freed with dst gc, and this warning happens. To fix it, we need to find these xdsts that are still held by others when removing the dev, and free xdst's dev and set it with loopback_dev. But unfortunately after flow_cache for xfrm was deleted, no list tracks them anymore. So we need to save these xdsts somewhere to release the xdst's dev later. To make this easier, this patch is to reuse uncached_list to track xdsts, so that the dev refcnt can be released in the event NETDEV_UNREGISTER process of fib_netdev_notifier. Thanks to Florian, we could move forward this fix quickly. Fixes: 52df157f17e5 ("xfrm: take refcnt of dst when creating struct xfrm_dst bundle") Reported-by: Jianlin Shi <jishi@redhat.com> Reported-by: Hangbin Liu <liuhangbin@gmail.com> Tested-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-01-10ipv6: Calculate hash thresholds for IPv6 nexthopsIdo Schimmel1-0/+7
Before we convert IPv6 to use hash-threshold instead of modulo-N, we first need each nexthop to store its region boundary in the hash function's output space. The boundary is calculated by dividing the output space equally between the different active nexthops. That is, nexthops that are not dead or linkdown. The boundaries are rebalanced whenever a nexthop is added or removed to a multipath route and whenever a nexthop becomes active or inactive. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08ipv6: Set nexthop flags upon carrier changeIdo Schimmel1-0/+1
Similar to IPv4, when the carrier of a netdev changes we should toggle the 'linkdown' flag on all the nexthops using it as their nexthop device. This will later allow us to test for the presence of this flag during route lookup and dump. Up until commit 4832c30d5458 ("net: ipv6: put host and anycast routes on device with address") host and anycast routes used the loopback netdev as their nexthop device and thus were not marked with the 'linkdown' flag. The patch preserves this behavior and allows one to ping the local address even when the nexthop device does not have a carrier and the 'ignore_routes_with_linkdown' sysctl is set. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08ipv6: Prepare to handle multiple netdev eventsIdo Schimmel1-1/+1
To make IPv6 more in line with IPv4 we need to be able to respond differently to different netdev events. For example, when a netdev is unregistered all the routes using it as their nexthop device should be flushed, whereas when the netdev's carrier changes only the 'linkdown' flag should be toggled. Currently, this is not possible, as the function that traverses the routing tables is not aware of the triggering event. Propagate the triggering event down, so that it could be used in later patches. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08ipv6: Clear nexthop flags upon netdev upIdo Schimmel1-0/+1
Previous patch marked nexthops with the 'dead' and 'linkdown' flags. Clear these flags when the netdev comes back up. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-07ipv6: prepare fib6_age() for exception tableWei Wang1-0/+2
If all dst cache entries are stored in the exception table under the main route, we have to go through them during fib6_age() when doing garbage collecting. Introduce a new function rt6_age_exception() which goes through all dst entries in the exception table and remove those entries that are expired. This function is called in fib6_age() so that all dst caches are also garbage collected. Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-07ipv6: introduce a hash table to store dst cacheWei Wang1-0/+3
Add a hash table into struct rt6_info in order to store dst caches created by pmtu discovery and ip redirect in ipv6 routing code. APIs to add dst cache, delete dst cache, find dst cache and update dst cache in the hash table are implemented and will be used in later commits. This is a preparation work to move all cache routes into the exception table instead of getting inserted into the fib6 tree. Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30ipv6: Use rt6i_idev index for echo replies to a local addressDavid Ahern1-0/+10
Tariq repored local pings to linklocal address is failing: $ ifconfig ens8 ens8: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 11.141.16.6 netmask 255.255.0.0 broadcast 11.141.255.255 inet6 fe80::7efe:90ff:fecb:7502 prefixlen 64 scopeid 0x20<link> ether 7c:fe:90:cb:75:02 txqueuelen 1000 (Ethernet) RX packets 12 bytes 1164 (1.1 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 30 bytes 2484 (2.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 $ /bin/ping6 -c 3 fe80::7efe:90ff:fecb:7502%ens8 PING fe80::7efe:90ff:fecb:7502%ens8(fe80::7efe:90ff:fecb:7502) 56 data bytes Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-25ipv6: Compute multipath hash for ICMP errors from offending packetJakub Sitnicki1-0/+1
When forwarding or sending out an ICMPv6 error, look at the embedded packet that triggered the error and compute a flow hash over its headers. This let's us route the ICMP error together with the flow it belongs to when multipath (ECMP) routing is in use, which in turn makes Path MTU Discovery work in ECMP load-balanced or anycast setups (RFC 7690). Granted, end-hosts behind the ECMP router (aka servers) need to reflect the IPv6 Flow Label for PMTUD to work. The code is organized to be in parallel with ipv4 stack: ip_multipath_l3_keys -> ip6_multipath_l3_keys fib_multipath_hash -> rt6_multipath_hash Signed-off-by: Jakub Sitnicki <jkbs@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-17ip6: fix PMTU discovery when using /127 subnetsVincent Bernat1-1/+1
The definition of an "anycast destination address" has been tweaked as a side-effect of commit 2647a9b07032 ("ipv6: Remove external dependency on rt6i_gateway and RTF_ANYCAST"). The first address of a point-to-point /127 subnet is now considered as an anycast address. This prevents ICMPv6 errors to be returned to a sender of such a subnet and breaks PMTU discovery. This can be reproduced with: ip link add name out6 type veth peer name in6 ip link add name out7 type veth peer name in7 ip link set mtu 1400 dev out7 ip link set mtu 1400 dev in7 ip netns add next-hop ip netns add next-next-hop ip link set netns next-hop dev in6 ip link set netns next-hop dev out7 ip link set netns next-next-hop dev in7 ip link set up dev out6 ip addr add 2001:db8:1::12/127 dev out6 ip netns exec next-hop ip link set up dev in6 ip netns exec next-hop ip link set up dev out7 ip netns exec next-hop ip addr add 2001:db8:1::13/127 dev in6 ip netns exec next-hop ip addr add 2001:db8:1::14/127 dev out7 ip netns exec next-hop ip route add default via 2001:db8:1::15 ip netns exec next-hop sysctl -qw net.ipv6.conf.all.forwarding=1 ip netns exec next-next-hop ip link set up dev in7 ip netns exec next-next-hop ip addr add 2001:db8:1::15/127 dev in7 ip netns exec next-next-hop ip addr add 2001:db8:1::50/128 dev in7 ip netns exec next-next-hop ip route add default via 2001:db8:1::14 ip netns exec next-next-hop sysctl -qw net.ipv6.conf.all.forwarding=1 ip route add 2001:db8:1::48/123 via 2001:db8:1::13 sleep 4 ping -M do -s 1452 -c 3 2001:db8:1::50 || true ip route get 2001:db8:1::50 Before the patch, we get: 2001:db8:1::50 from :: via 2001:db8:1::13 dev out6 src 2001:db8:1::12 metric 1024 pref medium After the patch, we get: 2001:db8:1::50 via 2001:db8:1::13 dev out6 src 2001:db8:1::12 metric 0 cache expires 578sec mtu 1400 pref medium Fixes: 2647a9b07032 ("ipv6: Remove external dependency on rt6i_gateway and RTF_ANYCAST") Signed-off-by: Vincent Bernat <vincent@bernat.im> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-06net: ipv6: Compare lwstate in detecting duplicate nexthopsDavid Ahern1-0/+8
Lennert reported a failure to add different mpls encaps in a multipath route: $ ip -6 route add 1234::/16 \ nexthop encap mpls 10 via fe80::1 dev ens3 \ nexthop encap mpls 20 via fe80::1 dev ens3 RTNETLINK answers: File exists The problem is that the duplicate nexthop detection does not compare lwtunnel configuration. Add it. Fixes: 19e42e451506 ("ipv6: support for fib route lwtunnel encap attributes") Signed-off-by: David Ahern <dsahern@gmail.com> Reported-by: João Taveira Araújo <joao.taveira@gmail.com> Reported-by: Lennert Buytenhek <buytenh@wantstofly.org> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Tested-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-18ipv6: get rid of icmp6 dst garbage collectorWei Wang1-1/+0
icmp6 dst route is currently ref counted during creation and will be freed by user during its call of dst_release(). So no need of a garbage collector for it. Remove all icmp6 dst garbage collector related code. Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22net: ipv6: Plumb extack through route add functionsDavid Ahern1-1/+1
Plumb extack argument down to route add functions. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-04ipv6: initialize route null entry in addrconf_init()WANG Cong1-0/+1
Andrey reported a crash on init_net.ipv6.ip6_null_entry->rt6i_idev since it is always NULL. This is clearly wrong, we have code to initialize it to loopback_dev, unfortunately the order is still not correct. loopback_dev is registered very early during boot, we lose a chance to re-initialize it in notifier. addrconf_init() is called after ip6_route_init(), which means we have no chance to correct it. Fix it by moving this initialization explicitly after ipv6_add_dev(init_net.loopback_dev) in addrconf_init(). Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04net: inet: Support UID-based routing in IP protocols.Lorenzo Colitti1-2/+3
- Use the UID in routing lookups made by protocol connect() and sendmsg() functions. - Make sure that routing lookups triggered by incoming packets (e.g., Path MTU discovery) take the UID of the socket into account. - For packets not associated with a userspace socket, (e.g., ping replies) use UID 0 inside the user namespace corresponding to the network namespace the socket belongs to. This allows all namespaces to apply routing and iptables rules to kernel-originated traffic in that namespaces by matching UID 0. This is better than using the UID of the kernel socket that is sending the traffic, because the UID of kernel sockets created at namespace creation time (e.g., the per-processor ICMP and TCP sockets) is the UID of the user that created the socket, which might not be mapped in the namespace. Tested: compiles allnoconfig, allyesconfig, allmodconfig Tested: https://android-review.googlesource.com/253302 Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27net: ipv6: Do not consider link state for nexthop validationDavid Ahern1-0/+1
Similar to IPv4, do not consider link state when validating next hops. Currently, if the link is down default routes can fail to insert: $ ip -6 ro add vrf blue default via 2100:2::64 dev eth2 RTNETLINK answers: No route to host With this patch the command succeeds. Fixes: 8c14586fc320 ("net: ipv6: Use passed in table for nexthop lookups") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19ipv6: Export p6_route_input_lookup symbolMahesh Bandewar1-0/+3
Make ip6_route_input_lookup available outside of ipv6 the module similar to ip_route_input_noref in the IPv4 world. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-18net: ipv6: Move ip6_route_get_saddr to inlineDavid Ahern1-3/+18
VRF driver needs access to ip6_route_get_saddr code. Since it does little beyond ipv6_dev_get_saddr and ipv6_dev_get_saddr is already exported for modules move ip6_route_get_saddr to the header as an inline. Code move only; no functional change. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15net: vrf: Handle ipv6 multicast and link-local addressesDavid Ahern1-0/+2
IPv6 multicast and link-local addresses require special handling by the VRF driver: 1. Rather than using the VRF device index and full FIB lookups, packets to/from these addresses should use direct FIB lookups based on the VRF device table. 2. fail sends/receives on a VRF device to/from a multicast address (e.g, make ping6 ff02::1%<vrf> fail) 3. move the setting of the flow oif to the first dst lookup and revert the change in icmpv6_echo_reply made in ca254490c8dfd ("net: Add VRF support to IPv6 stack"). Linklocal/mcast addresses require use of the skb->dev. With this change connections into and out of a VRF enslaved device work for multicast and link-local addresses work (icmp, tcp, and udp) e.g., 1. packets into VM with VRF config: ping6 -c3 fe80::e0:f9ff:fe1c:b974%br1 ping6 -c3 ff02::1%br1 ssh -6 fe80::e0:f9ff:fe1c:b974%br1 2. packets going out a VRF enslaved device: ping6 -c3 fe80::18f8:83ff:fe4b:7a2e%eth1 ping6 -c3 ff02::1%eth1 ssh -6 root@fe80::18f8:83ff:fe4b:7a2e%eth1 Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-11net: vrf: Fix dst reference countingDavid Ahern1-0/+3
Vivek reported a kernel exception deleting a VRF with an active connection through it. The root cause is that the socket has a cached reference to a dst that is destroyed. Converting the dst_destroy to dst_release and letting proper reference counting kick in does not work as the dst has a reference to the device which needs to be released as well. I talked to Hannes about this at netdev and he pointed out the ipv4 and ipv6 dst handling has dst_ifdown for just this scenario. Rather than continuing with the reinvented dst wheel in VRF just remove it and leverage the ipv4 and ipv6 versions. Fixes: 193125dbd8eb2 ("net: Introduce VRF device driver") Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-30ipv6: enforce flowi6_oif usage in ip6_dst_lookup_tail()Paolo Abeni1-2/+10
The current implementation of ip6_dst_lookup_tail basically ignore the egress ifindex match: if the saddr is set, ip6_route_output() purposefully ignores flowi6_oif, due to the commit d46a9d678e4c ("net: ipv6: Dont add RT6_LOOKUP_F_IFACE flag if saddr set"), if the saddr is 'any' the first route lookup in ip6_dst_lookup_tail fails, but upon failure a second lookup will be performed with saddr set, thus ignoring the ifindex constraint. This commit adds an output route lookup function variant, which allows the caller to specify lookup flags, and modify ip6_dst_lookup_tail() to enforce the ifindex match on the second lookup via said helper. ip6_route_output() becames now a static inline function build on top of ip6_route_output_flags(); as a side effect, out-of-tree modules need now a GPL license to access the output route lookup functionality. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03ipv6: kill sk_dst_lockEric Dumazet1-13/+4
While testing the np->opt RCU conversion, I found that UDP/IPv6 was using a mixture of xchg() and sk_dst_lock to protect concurrent changes to sk->sk_dst_cache, leading to possible corruptions and crashes. ip6_sk_dst_lookup_flow() uses sk_dst_check() anyway, so the simplest way to fix the mess is to remove sk_dst_lock completely, as we did for IPv4. __ip6_dst_store() and ip6_dst_store() share same implementation. sk_setup_caps() being called with socket lock being held or not, we have to use sk_dst_set() instead of __sk_dst_set() Note that I had to move the "np->dst_cookie = rt6_get_cookie(rt);" in ip6_dst_store() before the sk_setup_caps(sk, dst) call. This is because ip6_dst_store() can be called from process context, without any lock held. As soon as the dst is installed in sk->sk_dst_cache, dst can be freed from another cpu doing a concurrent ip6_dst_store() Doing the dst dereference before doing the install is needed to make sure no use after free would trigger. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30ipv6: Pass struct net through ip6_fragmentEric W. Biederman1-2/+2
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2015-05-25ipv6: Add rt6_get_cookie() functionMartin KaFai Lau1-1/+1
Instead of doing the rt6->rt6i_node check whenever we need to get the route's cookie. Refactor it into rt6_get_cookie(). It is a prep work to handle FLOWI_FLAG_KNOWN_NH and also percpu rt6_info later. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>