summaryrefslogtreecommitdiff
path: root/include/net/mac80211.h
AgeCommit message (Collapse)AuthorFilesLines
2014-09-11mac80211: replace SMPS hw flags with wiphy feature bitsEliad Peller1-12/+1
Use the new static_smps / dynamic_smps feature bits instead of mac80211-internal hw flags. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-05mac80211: extend set_coverage_class signatureLorenzo Bianconi1-2/+4
Extend mac80211 set_coverage_class API in order to enable ACK timeout estimation algorithm (dynack) passing coverage class equals to -1 to lower drivers. Synchronize set_coverage_class routine signature with mac80211 function pointer for p54, ath9k, ath9k_htc and ath5k drivers. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-05mac80211: add Intel Mobile Communications copyrightJohannes Berg1-0/+1
Our legal structure changed at some point (see wikipedia), but we forgot to immediately switch over to the new copyright notice. For files that we have modified in the time since the change, add the proper copyright notice now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-08-26mac80211: don't resize skbs needlesslyIdo Yariv1-1/+4
Header-less cloned skbs with sufficient headroom need not be cloned unless the tailroom is going to be modified. Fix ieee80211_skb_resize so it would only resize cloned skbs if either the header isn't released or the tailroom is going to be modified. Some drivers might have assumed that skbs are never cloned, so add a HW flag that explicitly permits cloned TX skbs. Drivers which do not modify TX skbs should set this flag to avoid copying skbs. Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-08-26mac80211: Fix accounting of the tailroom-needed counterIdo Yariv1-2/+5
When hw acceleration is enabled, the GENERATE_IV or PUT_IV_SPACE flags will only require headroom space. Consequently, the tailroom-needed counter can safely be decremented. Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-08-15mac80211: don't duplicate station QoS capability dataJohannes Berg1-1/+1
We currently track the QoS capability twice: for all peer stations in the WLAN_STA_WME flag, and for any clients associated to an AP interface separately for drivers in the sta->sta.wme field. Remove the WLAN_STA_WME flag and track the capability only in the driver-visible field, getting rid of the limitation that the field is only valid in AP mode. Reviewed-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: add support for Rx reordering offloadingMichal Kazior1-0/+34
Some drivers may be performing most of Tx/Rx aggregation on their own (e.g. in firmware) including AddBa/DelBa negotiations but may otherwise require Rx reordering assistance. The patch exports 2 new functions for establishing Rx aggregation sessions in assumption device driver has taken care of the necessary negotiations. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> [fix endian bug] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-25mac80211: implement multi-vif in-place reservationsMichal Kazior1-7/+1
Multi-vif in-place reservations happen when it is impossible to allocate more channel contexts as indicated by interface combinations. Such reservations are not finalized until all assigned interfaces are ready. This still doesn't handle all possible cases (i.e. degradation of number of channels) properly. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-25mac80211: split sched scan IEsDavid Spinadel1-19/+4
Split sched scan IEs to band specific and not band specific blocks. Common IEs blocks may be sent to the FW once per command, instead of per band. This allows optimization of size of the command, which may be required by some drivers (eg. iwlmvm with newer firmware version). As this changes the mac80211 API, update all drivers to use the new version correctly, even if they don't (yet) make use of the split data. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-25mac80211: support more than one band in scan requestDavid Spinadel1-1/+38
Some drivers (such as iwlmvm) can handle multiple bands in a single HW scan request. Add a HW flag to indicate that the driver support this. To hold the required data, create a separate structure for HW scan request that holds cfg scan request and data about different parts of the scan IEs. As this changes the mac80211 API, update all drivers using it to use the correct new function type/argument. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: protect TDLS discovery sessionArik Nemtsov1-0/+12
After sending a TDLS discovery-request, we expect a reply to arrive on the AP's channel. We must stay on the channel (no PSM, scan, etc.), since a TDLS setup-response is a direct packet not buffered by the AP. Add a new mac80211 driver callback to allow discovery session protection. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: add API to request TDLS operation from userspaceArik Nemtsov1-0/+13
Write a mac80211 to the cfg80211 API for requesting a userspace TDLS operation. Define TDLS specific reason codes that can be used here. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-26mac80211: add a single-transaction driver op to switch contextsLuciano Coelho1-0/+46
In some cases, when the driver is already using all the channel contexts it can handle at once, we have to do an in-place switch (ie. we cannot afford using an extra context temporarily for the transaction). But some drivers may not support switching the channel context assigned to a vif on the fly (ie. without unassigning and assigning it) while others may only work if the context is changed on the fly, without unassigning it first. To allow these different scenarios, add a new driver operation that let's the driver decide how to handle an in-place switch. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-21mac80211: export the expected throughputAntonio Quartulli1-0/+7
Add get_expected_throughput() API to mac80211 so that each driver can implement its own version based on the RC algorithm they are using (might be using an HW RC algo). The API returns a value expressed in Kbps. Also, add the new get_expected_throughput() member to the rate_control_ops structure in order to be able to query the RC algorithm (this patch provides an implementation of this API for both minstrel and minstrel_ht). The related member in the station_info object is now filled accordingly when dumping a station. Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-19mac80211: fix csa_counter_offs argument name in docbookLuciano Coelho1-2/+3
The csa_counter_offs was erroneously described as csa_offs in the docbook section. This fixes two warnings when making htmldocs (at least): Warning(include/net/mac80211.h:3428): No description found for parameter 'csa_counter_offs[IEEE80211_MAX_CSA_COUNTERS_NUM]' Warning(include/net/mac80211.h:3428): Excess struct/union/enum/typedef member 'csa_offs' description in 'ieee80211_mutable_offsets' Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-15mac80211: Handle the CSA counters correctlyAndrei Otcheretianski1-1/+22
Make the beacon CSA counters part of ieee80211_mutable_offsets and don't decrement CSA counters when generating a beacon template. This permits the driver to offload the CSA counters handling. Since mac80211 updates the probe responses with the correct counter, the driver should sync the counter's value with mac80211 using ieee80211_csa_update_counter function. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-15mac80211: Provide ieee80211_beacon_get_template APIAndrei Otcheretianski1-7/+36
Add a new API ieee80211_beacon_get_template, which doesn't affect DTIM counter and should be used if the device generates beacon frames, and new beacon template is needed. In addition set the offsets to TIM IE for MESH interface. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-06mac80211: fix CSA tx queue stoppingMichal Kazior1-1/+3
It was possible for tx queues to be stuck stopped if AP CSA finalization failed. In that case neither stop_ap nor do_stop woke the queues up. This means it was impossible to perform tx at all until driver was reloaded or a successful CSA was performed later. It was possible to solve this in a simpler manner however this is more robust and future proof (having multi-vif CSA in mind). New sdata->csa_block_tx is introduced to keep track of which interfaces requested tx to be blocked for CSA. This is required because mac80211 stops all tx queues for that purpose. This means queues must be awoken only when last tx-blocking CSA interface is finished. It is still possible to have tx queues stopped after CSA failure but as soon as offending interfaces are stopped from userspace (stop_ap or ifdown) tx queues are woken up properly. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-05mac80211: set an external flag for TDLS stationsArik Nemtsov1-0/+2
Expose a new tdls flag for the public ieee80211_sta struct. This can be used in some rate control decisions. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25mac80211: add option to generate CCMP IVs only for mgmt framesMarek Kwaczynski1-6/+10
Some chips can encrypt managment frames in HW, but require generated IV in the frame. Add a key flag that allows us to achieve this. Signed-off-by: Marek Kwaczynski <marek.kwaczynski@tieto.com> [use BIT(0) to fill that spot, fix indentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09mac80211: Update conf_is_ht() to work properly with 5/10MHz channelsRostislav Lisovy1-1/+3
The channels with 5/10MHz bandwidth are not HT. We have to reflect this in conf_is_ht() function which returns whether the particular channel is HT or not. Signed-off-by: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09mac80211: allow reservation of a running chanctxLuciano Coelho1-0/+7
With single-channel drivers, we need to be able to change a running chanctx if we want to use chanctx reservation. Not all drivers may be able to do this, so add a flag that indicates support for it. Changing a running chanctx can also be used as an optimization in multi-channel drivers when the context needs to be reserved for future usage. Introduce IEEE80211_CHANCTX_RESERVED chanctx mode to mark a channel as reserved so nobody else can use it (since we know it's going to change). In the future, we may allow several vifs to use the same reservation as long as they plan to use the chanctx on the same future channel. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09mac80211: add vif to flush callEmmanuel Grumbach1-1/+3
This will allow the low level driver to make decision based on the vif such as queues etc... Since the vif might be NULL, we can't add it to the tracing functions. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [fix staging rtl8821ae driver] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-55/+46
Pull networking updates from David Miller: "Here is my initial pull request for the networking subsystem during this merge window: 1) Support for ESN in AH (RFC 4302) from Fan Du. 2) Add full kernel doc for ethtool command structures, from Ben Hutchings. 3) Add BCM7xxx PHY driver, from Florian Fainelli. 4) Export computed TCP rate information in netlink socket dumps, from Eric Dumazet. 5) Allow IPSEC SA to be dumped partially using a filter, from Nicolas Dichtel. 6) Convert many drivers to pci_enable_msix_range(), from Alexander Gordeev. 7) Record SKB timestamps more efficiently, from Eric Dumazet. 8) Switch to microsecond resolution for TCP round trip times, also from Eric Dumazet. 9) Clean up and fix 6lowpan fragmentation handling by making use of the existing inet_frag api for it's implementation. 10) Add TX grant mapping to xen-netback driver, from Zoltan Kiss. 11) Auto size SKB lengths when composing netlink messages based upon past message sizes used, from Eric Dumazet. 12) qdisc dumps can take a long time, add a cond_resched(), From Eric Dumazet. 13) Sanitize netpoll core and drivers wrt. SKB handling semantics. Get rid of never-used-in-tree netpoll RX handling. From Eric W Biederman. 14) Support inter-address-family and namespace changing in VTI tunnel driver(s). From Steffen Klassert. 15) Add Altera TSE driver, from Vince Bridgers. 16) Optimizing csum_replace2() so that it doesn't adjust the checksum by checksumming the entire header, from Eric Dumazet. 17) Expand BPF internal implementation for faster interpreting, more direct translations into JIT'd code, and much cleaner uses of BPF filtering in non-socket ocntexts. From Daniel Borkmann and Alexei Starovoitov" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1976 commits) netpoll: Use skb_irq_freeable to make zap_completion_queue safe. net: Add a test to see if a skb is freeable in irq context qlcnic: Fix build failure due to undefined reference to `vxlan_get_rx_port' net: ptp: move PTP classifier in its own file net: sxgbe: make "core_ops" static net: sxgbe: fix logical vs bitwise operation net: sxgbe: sxgbe_mdio_register() frees the bus Call efx_set_channels() before efx->type->dimension_resources() xen-netback: disable rogue vif in kthread context net/mlx4: Set proper build dependancy with vxlan be2net: fix build dependency on VxLAN mac802154: make csma/cca parameters per-wpan mac802154: allow only one WPAN to be up at any given time net: filter: minor: fix kdoc in __sk_run_filter netlink: don't compare the nul-termination in nla_strcmp can: c_can: Avoid led toggling for every packet. can: c_can: Simplify TX interrupt cleanup can: c_can: Store dlc private can: c_can: Reduce register access can: c_can: Make the code readable ...
2014-03-20mac80211: set beamforming bit in radiotapEmmanuel Grumbach1-0/+2
Add a bit in rx_status.vht_flags to let the low level driver notify mac80211 about a beamformed packet. Propagate this to the radiotap header. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-03-20mac80211: add status_driver_data array to ieee80211_tx_infoEliad Peller1-2/+2
Drivers might want to have private data in addition to all other ieee80211_tx_info.status fields. The current ieee80211_tx_info.rate_driver_data overlaps with some of the non-rate data (e.g. ampdu_ack_len), so it might not be good enough. Since we already know how much free bytes remained, simply use this size to define (void *) array. While on it, change ack_signal type from int to the more explicit s32 type. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-20mac80211: allow driver to return error from sched_scan_stopJohannes Berg1-1/+2
In order to solve races with sched_scan_stop, it is necessary for the driver to be able to return an error to propagate that to cfg80211 so it doesn't send an event. Reviewed-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-20Merge branch 'master' into for-nextJiri Kosina1-11/+127
2014-02-19treewide: Fix typo in Documentation/DocBookMasanari Iida1-3/+3
This patch fix spelling typo in Documentation/DocBook. It is because .html and .xml files are generated by make htmldocs, I have to fix a typo within the source files. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-13mac80211: remove erroneous comment about RX radiotap headerJohannes Berg1-4/+0
There's no way the driver can pre-build the radiotap header, so remove the comment stating that it can. Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-13mac80211: add NAPI support backJohannes Berg1-21/+13
NAPI was originally added to mac80211 a long time ago (by John in commit 4e6cbfd09c66 in July 2010), but then removed years later (by Stanislaw in commit 30c97120c6c7 in February 2013). No driver ever used it, so that was fine. Now I'm adding support for NAPI to our driver, so add some code to mac80211 again to support NAPI. John was originally wrapping some (but not nearly all NAPI-related functions), but that doesn't scale very well with the number of functions that are there, some of which are even only inlines. Thus, instead of doing that, let the drivers manage the NAPI struct, except for napi_add() which is needed so mac80211 knows how to call napi_gro_receive(). Also remove some no longer needed definitions that were left when NAPI support was removed. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-11mac80211: reset probe_send_count also in HW_CONNECTION_MONITOR caseEliad Peller1-2/+0
In case of beacon_loss with IEEE80211_HW_CONNECTION_MONITOR device, mac80211 probes the ap (and disconnects on timeout) but ignores the ack. If we already got an ack, there's no reason to continue disconnecting. this can help devices that supports IEEE80211_HW_CONNECTION_MONITOR only partially (e.g. take care of keep alives, but does not probe the ap. In case the device wants to disconnect without probing, it can just call ieee80211_connection_loss. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-06mac80211: propagate STBC / LDPC flags to radiotapEmmanuel Grumbach1-0/+2
This capabilities weren't propagated to the radiotap header. We don't set here the VHT_KNOWN / MCS_HAVE flag because not all the low level drivers will know how to properly flag the frames, hence the low level driver will be in charge of setting IEEE80211_RADIOTAP_MCS_HAVE_FEC, IEEE80211_RADIOTAP_MCS_HAVE_STBC and / or IEEE80211_RADIOTAP_VHT_KNOWN_STBC according to its capabilities. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-06mac80211: move VHT related RX_FLAG to another variableEmmanuel Grumbach1-6/+17
ieee80211_rx_status.flags is full. Define a new vht_flag variable to be able to set more VHT related flags and make room in flags. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> [ath10k] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-06mac80211: remove unused radiotap vendor fields in ieee80211_rx_statusEmmanuel Grumbach1-12/+0
The purpose of this housekeeping is to make some room for VHT flags. The radiotap vendor fields weren't in use. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-05mac80211: remove module handling from rate control opsJohannes Berg1-1/+0
There's not a single rate control algorithm actually in a separate module where the module refcount would be required. Similarly, there's no specific rate control module. Therefore, all the module handling code in rate control is really just dead code, so remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-05mac80211: make rate control ops constJohannes Berg1-2/+2
Change the code to allow making all the rate control ops const, nothing ever needs to change them. Also change all drivers to make use of this and mark the ops const. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-05mac80211: only set CSA beacon when at least one beacon must be transmittedLuciano Coelho1-4/+6
A beacon should never have a Channel Switch Announcement information element with a count of 0, because a count of 1 means switch just before the next beacon. So, if a count of 0 was valid in a beacon, it would have been transmitted in the next channel already, which is useless. A CSA count equal to zero is only meaningful in action frames or probe_responses. Fix the ieee80211_csa_is_complete() and ieee80211_update_csa() functions accordingly. With a CSA count of 0, we won't transmit any CSA beacons, because the switch will happen before the next TBTT. To avoid extra work and potential confusion in the drivers, complete the CSA immediately, instead of waiting for the driver to call ieee80211_csa_finish(). To keep things simpler, we also switch immediately when the CSA count is 1, while in theory we should delay the switch until just before the next TBTT. Additionally, move the ieee80211_csa_finish() function to cfg.c, where it makes more sense. Tested-by: Simon Wunderlich <sw@simonwunderlich.de> Acked-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-10mac80211: handle MMPDUs at EOSP correctlyJohannes Berg1-0/+5
If a uAPSD service period ends with an MMPDU, we currently just send that MMPDU, but it obviously won't get the EOSP bit set as it doesn't have a QoS header. This contradicts the standard, so add a QoS-nulldata frame after the MMPDU to properly terminate the service period with a frame that has EOSP set. Also fix a bug wrt. the TID for the MMPDU, it shouldn't be set to 0 unconditionally but use the actual TID that was assigned. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-08mac80211: remove channel_change_timeJohannes Berg1-3/+0
This value is no longer used by mac80211, and practically no driver ever set it to a correct value anyway, so remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-19mac80211: add helper functions for tracking P2P NoA stateFelix Fietkau1-0/+47
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16mac80211: let the driver reserve extra tailroom in beaconsFelix Fietkau1-0/+4
Can be used to add extra IEs (such as P2P NoA) without having to reallocate the buffer. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16mac80211: add pre-RCU-sync sta removal driver operationJohannes Berg1-2/+19
Currently, mac80211 allows drivers to keep RCU-protected station references that are cleared when the station is removed from the driver and consequently needs to synchronize twice, once before removing the station from the driver (so it can guarantee that the station is no longer used in TX towards the driver) and once after the station is removed from the driver. Add a new pre-RCU-synchronisation station removal operation to the API to allow drivers to clear/invalidate their RCU-protected station pointers before the RCU synchronisation. This will allow removing the second synchronisation by changing the driver API so that the driver may no longer assume a valid RCU-protected pointer after sta_remove/sta_state returns. The alternative to this would be to synchronize_rcu() in all the drivers that currently rely on this behaviour (only iwlmvm) but that would defeat the purpose. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-03nl80211: vendor command supportJohannes Berg1-0/+13
Add support for vendor-specific commands to nl80211. This is intended to be used for really vendor-specific functionality that can't be implemented in a generic fashion for any reason. It's *NOT* intended to be used for any normal/generic feature or any optimisations that could be implemented across drivers. Currently, only vendor commands (with replies) are supported, no dump operations or vendor-specific notifications. Also add a function wdev_to_ieee80211_vif() to mac80211 which is needed for mac80211-based drivers wanting to implement any vendor commands. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-03Revert "mac80211: add driver callback for per-interface multicast filter"Johannes Berg1-7/+0
This reverts commit 488b366a452934141959384c7a1b52b22d6154ef. The code isn't used by anyone, and the Intel driver isn't planning to use it either right now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: add min required channel definition fieldEliad Peller1-0/+4
Add a new field to ieee80211_chanctx_conf to indicate the min required channel configuration. Tuning to a narrower channel might help reducing the noise level and saving some power. The min required channel definition is the max of all min required channel definitions of the interfaces bound to this channel context. In AP mode, use 20MHz when there are no connected station. When a new station is added/removed, calculate the new max bandwidth supported by any of the stations (e.g. 80MHz when 80MHz and 40MHz stations are connected). In other cases, simply use bss_conf.chandef as the min required chandef. Notify drivers about changes to this field by calling drv_change_chanctx with a new CHANGE_MIN_WIDTH notification. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: add generic cipher scheme supportMax Stepanov1-0/+36
This adds generic cipher scheme support to mac80211, such schemes are fully under control by the driver. On hw registration drivers may specify additional HW ciphers with a scheme how these ciphers have to be handled by mac80211 TX/RR. A cipher scheme specifies a cipher suite value, a size of the security header to be added to or stripped from frames and how the PN is to be verified on RX. Signed-off-by: Max Stepanov <Max.Stepanov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: add ieee80211_tx_prepare_skb() helper functionFelix Fietkau1-0/+14
This can be used by a driver to prepare skbs for transmission, which were obtained via functions such as ieee80211_probereq_get or ieee80211_nullfunc_get. This is useful for drivers that want to send those frames directly, but need rate control information to be prepared first. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: add missing IEEE80211_HW_SUPPORTS_HT_CCK_RATES docsJohannes Berg1-0/+4
Document the IEEE80211_HW_SUPPORTS_HT_CCK_RATES flag. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-02mac80211: implement STA CSA for drivers using channel contextsArik Nemtsov1-0/+6
Limit the current implementation to a single channel context used by a single vif, thereby avoiding multi-vif/channel complexities. Reuse the main function from AP CSA code, but move a portion out in order to fit the STA scenario. Add a new mac80211 HW flag so we don't break devices that don't support channel switch with channel-contexts. The new behavior will be opt-in. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>