Age | Commit message (Collapse) | Author | Files | Lines |
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-01-25
The following pull-request contains BPF updates for your *net* tree.
We've added 12 non-merge commits during the last 2 day(s) which contain
a total of 13 files changed, 190 insertions(+), 91 deletions(-).
The main changes are:
1) Fix bpf_xdp_adjust_tail() in context of XSK zero-copy drivers which
support XDP multi-buffer. The former triggered a NULL pointer
dereference upon shrinking, from Maciej Fijalkowski & Tirthendu Sarkar.
2) Fix a bug in riscv64 BPF JIT which emitted a wrong prologue and
epilogue for struct_ops programs, from Pu Lehui.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
i40e: update xdp_rxq_info::frag_size for ZC enabled Rx queue
i40e: set xdp_rxq_info::frag_size
xdp: reflect tail increase for MEM_TYPE_XSK_BUFF_POOL
ice: update xdp_rxq_info::frag_size for ZC enabled Rx queue
intel: xsk: initialize skb_frag_t::bv_offset in ZC drivers
ice: remove redundant xdp_rxq_info registration
i40e: handle multi-buffer packets that are shrunk by xdp prog
ice: work on pre-XDP prog frag count
xsk: fix usage of multi-buffer BPF helpers for ZC XDP
xsk: make xsk_buff_pool responsible for clearing xdp_buff::flags
xsk: recycle buffer in case Rx queue was full
riscv, bpf: Fix unpredictable kernel crash about RV64 struct_ops
====================
Link: https://lore.kernel.org/r/20240125084416.10876-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently when packet is shrunk via bpf_xdp_adjust_tail() and memory
type is set to MEM_TYPE_XSK_BUFF_POOL, null ptr dereference happens:
[1136314.192256] BUG: kernel NULL pointer dereference, address:
0000000000000034
[1136314.203943] #PF: supervisor read access in kernel mode
[1136314.213768] #PF: error_code(0x0000) - not-present page
[1136314.223550] PGD 0 P4D 0
[1136314.230684] Oops: 0000 [#1] PREEMPT SMP NOPTI
[1136314.239621] CPU: 8 PID: 54203 Comm: xdpsock Not tainted 6.6.0+ #257
[1136314.250469] Hardware name: Intel Corporation S2600WFT/S2600WFT,
BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[1136314.265615] RIP: 0010:__xdp_return+0x6c/0x210
[1136314.274653] Code: ad 00 48 8b 47 08 49 89 f8 a8 01 0f 85 9b 01 00 00 0f 1f 44 00 00 f0 41 ff 48 34 75 32 4c 89 c7 e9 79 cd 80 ff 83 fe 03 75 17 <f6> 41 34 01 0f 85 02 01 00 00 48 89 cf e9 22 cc 1e 00 e9 3d d2 86
[1136314.302907] RSP: 0018:ffffc900089f8db0 EFLAGS: 00010246
[1136314.312967] RAX: ffffc9003168aed0 RBX: ffff8881c3300000 RCX:
0000000000000000
[1136314.324953] RDX: 0000000000000000 RSI: 0000000000000003 RDI:
ffffc9003168c000
[1136314.336929] RBP: 0000000000000ae0 R08: 0000000000000002 R09:
0000000000010000
[1136314.348844] R10: ffffc9000e495000 R11: 0000000000000040 R12:
0000000000000001
[1136314.360706] R13: 0000000000000524 R14: ffffc9003168aec0 R15:
0000000000000001
[1136314.373298] FS: 00007f8df8bbcb80(0000) GS:ffff8897e0e00000(0000)
knlGS:0000000000000000
[1136314.386105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1136314.396532] CR2: 0000000000000034 CR3: 00000001aa912002 CR4:
00000000007706f0
[1136314.408377] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[1136314.420173] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[1136314.431890] PKRU: 55555554
[1136314.439143] Call Trace:
[1136314.446058] <IRQ>
[1136314.452465] ? __die+0x20/0x70
[1136314.459881] ? page_fault_oops+0x15b/0x440
[1136314.468305] ? exc_page_fault+0x6a/0x150
[1136314.476491] ? asm_exc_page_fault+0x22/0x30
[1136314.484927] ? __xdp_return+0x6c/0x210
[1136314.492863] bpf_xdp_adjust_tail+0x155/0x1d0
[1136314.501269] bpf_prog_ccc47ae29d3b6570_xdp_sock_prog+0x15/0x60
[1136314.511263] ice_clean_rx_irq_zc+0x206/0xc60 [ice]
[1136314.520222] ? ice_xmit_zc+0x6e/0x150 [ice]
[1136314.528506] ice_napi_poll+0x467/0x670 [ice]
[1136314.536858] ? ttwu_do_activate.constprop.0+0x8f/0x1a0
[1136314.546010] __napi_poll+0x29/0x1b0
[1136314.553462] net_rx_action+0x133/0x270
[1136314.561619] __do_softirq+0xbe/0x28e
[1136314.569303] do_softirq+0x3f/0x60
This comes from __xdp_return() call with xdp_buff argument passed as
NULL which is supposed to be consumed by xsk_buff_free() call.
To address this properly, in ZC case, a node that represents the frag
being removed has to be pulled out of xskb_list. Introduce
appropriate xsk helpers to do such node operation and use them
accordingly within bpf_xdp_adjust_tail().
Fixes: 24ea50127ecf ("xsk: support mbuf on ZC RX")
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> # For the xsk header part
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20240124191602.566724-4-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
XDP multi-buffer support introduced XDP_FLAGS_HAS_FRAGS flag that is
used by drivers to notify data path whether xdp_buff contains fragments
or not. Data path looks up mentioned flag on first buffer that occupies
the linear part of xdp_buff, so drivers only modify it there. This is
sufficient for SKB and XDP_DRV modes as usually xdp_buff is allocated on
stack or it resides within struct representing driver's queue and
fragments are carried via skb_frag_t structs. IOW, we are dealing with
only one xdp_buff.
ZC mode though relies on list of xdp_buff structs that is carried via
xsk_buff_pool::xskb_list, so ZC data path has to make sure that
fragments do *not* have XDP_FLAGS_HAS_FRAGS set. Otherwise,
xsk_buff_free() could misbehave if it would be executed against xdp_buff
that carries a frag with XDP_FLAGS_HAS_FRAGS flag set. Such scenario can
take place when within supplied XDP program bpf_xdp_adjust_tail() is
used with negative offset that would in turn release the tail fragment
from multi-buffer frame.
Calling xsk_buff_free() on tail fragment with XDP_FLAGS_HAS_FRAGS would
result in releasing all the nodes from xskb_list that were produced by
driver before XDP program execution, which is not what is intended -
only tail fragment should be deleted from xskb_list and then it should
be put onto xsk_buff_pool::free_list. Such multi-buffer frame will never
make it up to user space, so from AF_XDP application POV there would be
no traffic running, however due to free_list getting constantly new
nodes, driver will be able to feed HW Rx queue with recycled buffers.
Bottom line is that instead of traffic being redirected to user space,
it would be continuously dropped.
To fix this, let us clear the mentioned flag on xsk_buff_pool side
during xdp_buff initialization, which is what should have been done
right from the start of XSK multi-buffer support.
Fixes: 1bbc04de607b ("ice: xsk: add RX multi-buffer support")
Fixes: 1c9ba9c14658 ("i40e: xsk: add RX multi-buffer support")
Fixes: 24ea50127ecf ("xsk: support mbuf on ZC RX")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20240124191602.566724-3-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
- Correct comments for nlpid, family, udlen and udata in struct nft_table,
and afinfo is no longer a member of enum nft_set_class.
- Add comment for data in struct nft_set_elem.
- Add comment for flags in struct nft_ctx.
- Add comments for timeout in struct nft_set_iter, and flags is not a
member of struct nft_set_iter, remove the comment for it.
- Add comments for commit, abort, estimate and gc_init in struct
nft_set_ops.
- Add comments for pending_update, num_exprs, exprs and catchall_list
in struct nft_set.
- Add comment for ext_len in struct nft_set_ext_tmpl.
- Add comment for inner_ops in struct nft_expr_type.
- Add comments for clone, destroy_clone, reduce, gc, offload,
offload_action, offload_stats in struct nft_expr_ops.
- Add comments for blob_gen_0, blob_gen_1, bound, genmask, udlen, udata,
blob_next in struct nft_chain.
- Add comment for flags in struct nft_base_chain.
- Add comments for udlen, udata in struct nft_object.
- Add comment for type in struct nft_object_ops.
- Add comment for hook_list in struct nft_flowtable, and remove comments
for dev_name and ops which are not members of struct nft_flowtable.
Signed-off-by: George Guo <guodongtai@kylinos.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When a qdisc is deleted from a net device the stack instructs the
underlying driver to remove its flow offload callback from the
associated filter block using the 'FLOW_BLOCK_UNBIND' command. The stack
then continues to replay the removal of the filters in the block for
this driver by iterating over the chains in the block and invoking the
'reoffload' operation of the classifier being used. In turn, the
classifier in its 'reoffload' operation prepares and emits a
'FLOW_CLS_DESTROY' command for each filter.
However, the stack does not do the same for chain templates and the
underlying driver never receives a 'FLOW_CLS_TMPLT_DESTROY' command when
a qdisc is deleted. This results in a memory leak [1] which can be
reproduced using [2].
Fix by introducing a 'tmplt_reoffload' operation and have the stack
invoke it with the appropriate arguments as part of the replay.
Implement the operation in the sole classifier that supports chain
templates (flower) by emitting the 'FLOW_CLS_TMPLT_{CREATE,DESTROY}'
command based on whether a flow offload callback is being bound to a
filter block or being unbound from one.
As far as I can tell, the issue happens since cited commit which
reordered tcf_block_offload_unbind() before tcf_block_flush_all_chains()
in __tcf_block_put(). The order cannot be reversed as the filter block
is expected to be freed after flushing all the chains.
[1]
unreferenced object 0xffff888107e28800 (size 2048):
comm "tc", pid 1079, jiffies 4294958525 (age 3074.287s)
hex dump (first 32 bytes):
b1 a6 7c 11 81 88 ff ff e0 5b b3 10 81 88 ff ff ..|......[......
01 00 00 00 00 00 00 00 e0 aa b0 84 ff ff ff ff ................
backtrace:
[<ffffffff81c06a68>] __kmem_cache_alloc_node+0x1e8/0x320
[<ffffffff81ab374e>] __kmalloc+0x4e/0x90
[<ffffffff832aec6d>] mlxsw_sp_acl_ruleset_get+0x34d/0x7a0
[<ffffffff832bc195>] mlxsw_sp_flower_tmplt_create+0x145/0x180
[<ffffffff832b2e1a>] mlxsw_sp_flow_block_cb+0x1ea/0x280
[<ffffffff83a10613>] tc_setup_cb_call+0x183/0x340
[<ffffffff83a9f85a>] fl_tmplt_create+0x3da/0x4c0
[<ffffffff83a22435>] tc_ctl_chain+0xa15/0x1170
[<ffffffff838a863c>] rtnetlink_rcv_msg+0x3cc/0xed0
[<ffffffff83ac87f0>] netlink_rcv_skb+0x170/0x440
[<ffffffff83ac6270>] netlink_unicast+0x540/0x820
[<ffffffff83ac6e28>] netlink_sendmsg+0x8d8/0xda0
[<ffffffff83793def>] ____sys_sendmsg+0x30f/0xa80
[<ffffffff8379d29a>] ___sys_sendmsg+0x13a/0x1e0
[<ffffffff8379d50c>] __sys_sendmsg+0x11c/0x1f0
[<ffffffff843b9ce0>] do_syscall_64+0x40/0xe0
unreferenced object 0xffff88816d2c0400 (size 1024):
comm "tc", pid 1079, jiffies 4294958525 (age 3074.287s)
hex dump (first 32 bytes):
40 00 00 00 00 00 00 00 57 f6 38 be 00 00 00 00 @.......W.8.....
10 04 2c 6d 81 88 ff ff 10 04 2c 6d 81 88 ff ff ..,m......,m....
backtrace:
[<ffffffff81c06a68>] __kmem_cache_alloc_node+0x1e8/0x320
[<ffffffff81ab36c1>] __kmalloc_node+0x51/0x90
[<ffffffff81a8ed96>] kvmalloc_node+0xa6/0x1f0
[<ffffffff82827d03>] bucket_table_alloc.isra.0+0x83/0x460
[<ffffffff82828d2b>] rhashtable_init+0x43b/0x7c0
[<ffffffff832aed48>] mlxsw_sp_acl_ruleset_get+0x428/0x7a0
[<ffffffff832bc195>] mlxsw_sp_flower_tmplt_create+0x145/0x180
[<ffffffff832b2e1a>] mlxsw_sp_flow_block_cb+0x1ea/0x280
[<ffffffff83a10613>] tc_setup_cb_call+0x183/0x340
[<ffffffff83a9f85a>] fl_tmplt_create+0x3da/0x4c0
[<ffffffff83a22435>] tc_ctl_chain+0xa15/0x1170
[<ffffffff838a863c>] rtnetlink_rcv_msg+0x3cc/0xed0
[<ffffffff83ac87f0>] netlink_rcv_skb+0x170/0x440
[<ffffffff83ac6270>] netlink_unicast+0x540/0x820
[<ffffffff83ac6e28>] netlink_sendmsg+0x8d8/0xda0
[<ffffffff83793def>] ____sys_sendmsg+0x30f/0xa80
[2]
# tc qdisc add dev swp1 clsact
# tc chain add dev swp1 ingress proto ip chain 1 flower dst_ip 0.0.0.0/32
# tc qdisc del dev swp1 clsact
# devlink dev reload pci/0000:06:00.0
Fixes: bbf73830cd48 ("net: sched: traverse chains in block with tcf_get_next_chain()")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Generic sk_busy_loop_end() only looks at sk->sk_receive_queue
for presence of packets.
Problem is that for UDP sockets after blamed commit, some packets
could be present in another queue: udp_sk(sk)->reader_queue
In some cases, a busy poller could spin until timeout expiration,
even if some packets are available in udp_sk(sk)->reader_queue.
v3: - make sk_busy_loop_end() nicer (Willem)
v2: - add a READ_ONCE(sk->sk_family) in sk_is_inet() to avoid KCSAN splats.
- add a sk_is_inet() check in sk_is_udp() (Willem feedback)
- add a sk_is_inet() check in sk_is_tcp().
Fixes: 2276f58ac589 ("udp: use a separate rx queue for packet reception")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot reported an uninit-value bug below. [0]
llc supports ETH_P_802_2 (0x0004) and used to support ETH_P_TR_802_2
(0x0011), and syzbot abused the latter to trigger the bug.
write$tun(r0, &(0x7f0000000040)={@val={0x0, 0x11}, @val, @mpls={[], @llc={@snap={0xaa, 0x1, ')', "90e5dd"}}}}, 0x16)
llc_conn_handler() initialises local variables {saddr,daddr}.mac
based on skb in llc_pdu_decode_sa()/llc_pdu_decode_da() and passes
them to __llc_lookup().
However, the initialisation is done only when skb->protocol is
htons(ETH_P_802_2), otherwise, __llc_lookup_established() and
__llc_lookup_listener() will read garbage.
The missing initialisation existed prior to commit 211ed865108e
("net: delete all instances of special processing for token ring").
It removed the part to kick out the token ring stuff but forgot to
close the door allowing ETH_P_TR_802_2 packets to sneak into llc_rcv().
Let's remove llc_tr_packet_type and complete the deprecation.
[0]:
BUG: KMSAN: uninit-value in __llc_lookup_established+0xe9d/0xf90
__llc_lookup_established+0xe9d/0xf90
__llc_lookup net/llc/llc_conn.c:611 [inline]
llc_conn_handler+0x4bd/0x1360 net/llc/llc_conn.c:791
llc_rcv+0xfbb/0x14a0 net/llc/llc_input.c:206
__netif_receive_skb_one_core net/core/dev.c:5527 [inline]
__netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5641
netif_receive_skb_internal net/core/dev.c:5727 [inline]
netif_receive_skb+0x58/0x660 net/core/dev.c:5786
tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555
tun_get_user+0x53af/0x66d0 drivers/net/tun.c:2002
tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048
call_write_iter include/linux/fs.h:2020 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x8ef/0x1490 fs/read_write.c:584
ksys_write+0x20f/0x4c0 fs/read_write.c:637
__do_sys_write fs/read_write.c:649 [inline]
__se_sys_write fs/read_write.c:646 [inline]
__x64_sys_write+0x93/0xd0 fs/read_write.c:646
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Local variable daddr created at:
llc_conn_handler+0x53/0x1360 net/llc/llc_conn.c:783
llc_rcv+0xfbb/0x14a0 net/llc/llc_input.c:206
CPU: 1 PID: 5004 Comm: syz-executor994 Not tainted 6.6.0-syzkaller-14500-g1c41041124bd #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023
Fixes: 211ed865108e ("net: delete all instances of special processing for token ring")
Reported-by: syzbot+b5ad66046b913bc04c6f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b5ad66046b913bc04c6f
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240119015515.61898-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When I run syz's reproduction C program locally, it causes the following
issue:
pvqspinlock: lock 0xffff9d181cd5c660 has corrupted value 0x0!
WARNING: CPU: 19 PID: 21160 at __pv_queued_spin_unlock_slowpath (kernel/locking/qspinlock_paravirt.h:508)
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:__pv_queued_spin_unlock_slowpath (kernel/locking/qspinlock_paravirt.h:508)
Code: 73 56 3a ff 90 c3 cc cc cc cc 8b 05 bb 1f 48 01 85 c0 74 05 c3 cc cc cc cc 8b 17 48 89 fe 48 c7 c7
30 20 ce 8f e8 ad 56 42 ff <0f> 0b c3 cc cc cc cc 0f 0b 0f 1f 40 00 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffa8d200604cb8 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9d1ef60e0908
RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff9d1ef60e0900
RBP: ffff9d181cd5c280 R08: 0000000000000000 R09: 00000000ffff7fff
R10: ffffa8d200604b68 R11: ffffffff907dcdc8 R12: 0000000000000000
R13: ffff9d181cd5c660 R14: ffff9d1813a3f330 R15: 0000000000001000
FS: 00007fa110184640(0000) GS:ffff9d1ef60c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000000 CR3: 000000011f65e000 CR4: 00000000000006f0
Call Trace:
<IRQ>
_raw_spin_unlock (kernel/locking/spinlock.c:186)
inet_csk_reqsk_queue_add (net/ipv4/inet_connection_sock.c:1321)
inet_csk_complete_hashdance (net/ipv4/inet_connection_sock.c:1358)
tcp_check_req (net/ipv4/tcp_minisocks.c:868)
tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2260)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205)
ip_local_deliver_finish (net/ipv4/ip_input.c:234)
__netif_receive_skb_one_core (net/core/dev.c:5529)
process_backlog (./include/linux/rcupdate.h:779)
__napi_poll (net/core/dev.c:6533)
net_rx_action (net/core/dev.c:6604)
__do_softirq (./arch/x86/include/asm/jump_label.h:27)
do_softirq (kernel/softirq.c:454 kernel/softirq.c:441)
</IRQ>
<TASK>
__local_bh_enable_ip (kernel/softirq.c:381)
__dev_queue_xmit (net/core/dev.c:4374)
ip_finish_output2 (./include/net/neighbour.h:540 net/ipv4/ip_output.c:235)
__ip_queue_xmit (net/ipv4/ip_output.c:535)
__tcp_transmit_skb (net/ipv4/tcp_output.c:1462)
tcp_rcv_synsent_state_process (net/ipv4/tcp_input.c:6469)
tcp_rcv_state_process (net/ipv4/tcp_input.c:6657)
tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1929)
__release_sock (./include/net/sock.h:1121 net/core/sock.c:2968)
release_sock (net/core/sock.c:3536)
inet_wait_for_connect (net/ipv4/af_inet.c:609)
__inet_stream_connect (net/ipv4/af_inet.c:702)
inet_stream_connect (net/ipv4/af_inet.c:748)
__sys_connect (./include/linux/file.h:45 net/socket.c:2064)
__x64_sys_connect (net/socket.c:2073 net/socket.c:2070 net/socket.c:2070)
do_syscall_64 (arch/x86/entry/common.c:51 arch/x86/entry/common.c:82)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129)
RIP: 0033:0x7fa10ff05a3d
Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89
c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ab a3 0e 00 f7 d8 64 89 01 48
RSP: 002b:00007fa110183de8 EFLAGS: 00000202 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000020000054 RCX: 00007fa10ff05a3d
RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000003
RBP: 00007fa110183e20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 00007fa110184640
R13: 0000000000000000 R14: 00007fa10fe8b060 R15: 00007fff73e23b20
</TASK>
The issue triggering process is analyzed as follows:
Thread A Thread B
tcp_v4_rcv //receive ack TCP packet inet_shutdown
tcp_check_req tcp_disconnect //disconnect sock
... tcp_set_state(sk, TCP_CLOSE)
inet_csk_complete_hashdance ...
inet_csk_reqsk_queue_add inet_listen //start listen
spin_lock(&queue->rskq_lock) inet_csk_listen_start
... reqsk_queue_alloc
... spin_lock_init
spin_unlock(&queue->rskq_lock) //warning
When the socket receives the ACK packet during the three-way handshake,
it will hold spinlock. And then the user actively shutdowns the socket
and listens to the socket immediately, the spinlock will be initialized.
When the socket is going to release the spinlock, a warning is generated.
Also the same issue to fastopenq.lock.
Move init spinlock to inet_create and inet_accept to make sure init the
accept_queue's spinlocks once.
Fixes: fff1f3001cc5 ("tcp: add a spinlock to protect struct request_sock_queue")
Fixes: 168a8f58059a ("tcp: TCP Fast Open Server - main code path")
Reported-by: Ming Shu <sming56@aliyun.com>
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240118012019.1751966-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Previous releases - regressions:
- Revert "net: rtnetlink: Enslave device before bringing it up",
breaks the case inverse to the one it was trying to fix
- net: dsa: fix oob access in DSA's netdevice event handler
dereference netdev_priv() before check its a DSA port
- sched: track device in tcf_block_get/put_ext() only for clsact
binder types
- net: tls, fix WARNING in __sk_msg_free when record becomes full
during splice and MORE hint set
- sfp-bus: fix SFP mode detect from bitrate
- drv: stmmac: prevent DSA tags from breaking COE
Previous releases - always broken:
- bpf: fix no forward progress in in bpf_iter_udp if output buffer is
too small
- bpf: reject variable offset alu on registers with a type of
PTR_TO_FLOW_KEYS to prevent oob access
- netfilter: tighten input validation
- net: add more sanity check in virtio_net_hdr_to_skb()
- rxrpc: fix use of Don't Fragment flag on RESPONSE packets, avoid
infinite loop
- amt: do not use the portion of skb->cb area which may get clobbered
- mptcp: improve validation of the MPTCPOPT_MP_JOIN MCTCP option
Misc:
- spring cleanup of inactive maintainers"
* tag 'net-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
i40e: Include types.h to some headers
ipv6: mcast: fix data-race in ipv6_mc_down / mld_ifc_work
selftests: mlxsw: qos_pfc: Adjust the test to support 8 lanes
selftests: mlxsw: qos_pfc: Remove wrong description
mlxsw: spectrum_router: Register netdevice notifier before nexthop
mlxsw: spectrum_acl_tcam: Fix stack corruption
mlxsw: spectrum_acl_tcam: Fix NULL pointer dereference in error path
mlxsw: spectrum_acl_erp: Fix error flow of pool allocation failure
ethtool: netlink: Add missing ethnl_ops_begin/complete
selftests: bonding: Add more missing config options
selftests: netdevsim: add a config file
libbpf: warn on unexpected __arg_ctx type when rewriting BTF
selftests/bpf: add tests confirming type logic in kernel for __arg_ctx
bpf: enforce types for __arg_ctx-tagged arguments in global subprogs
bpf: extract bpf_ctx_convert_map logic and make it more reusable
libbpf: feature-detect arg:ctx tag support in kernel
ipvs: avoid stat macros calls from preemptible context
netfilter: nf_tables: reject NFT_SET_CONCAT with not field length description
netfilter: nf_tables: skip dead set elements in netlink dump
netfilter: nf_tables: do not allow mismatch field size and set key length
...
|
|
netif_txq_try_stop() uses "get_desc >= start_thrs" as the check for
the call to netif_tx_start_queue().
Use ">=" i netdev_txq_completed_mb(), too.
Fixes: c91c46de6bbc ("net: provide macros for commonly copied lockless queue stop/wake code")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull rdma updates from Jason Gunthorpe:
"Small cycle, with some typical driver updates:
- General code tidying in siw, hfi1, idrdma, usnic, hns rtrs and
bnxt_re
- Many small siw cleanups without an overeaching theme
- Debugfs stats for hns
- Fix a TX queue timeout in IPoIB and missed locking of the mcast
list
- Support more features of P7 devices in bnxt_re including a new work
submission protocol
- CQ interrupts for MANA
- netlink stats for erdma
- EFA multipath PCI support
- Fix Incorrect MR invalidation in iser"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (66 commits)
RDMA/bnxt_re: Fix error code in bnxt_re_create_cq()
RDMA/efa: Add EFA query MR support
IB/iser: Prevent invalidating wrong MR
RDMA/erdma: Add hardware statistics support
RDMA/erdma: Introduce dma pool for hardware responses of CMDQ requests
IB/iser: iscsi_iser.h: fix kernel-doc warning and spellos
RDMA/mana_ib: Add CQ interrupt support for RAW QP
RDMA/mana_ib: query device capabilities
RDMA/mana_ib: register RDMA device with GDMA
RDMA/bnxt_re: Fix the sparse warnings
RDMA/bnxt_re: Fix the offset for GenP7 adapters for user applications
RDMA/bnxt_re: Share a page to expose per CQ info with userspace
RDMA/bnxt_re: Add UAPI to share a page with user space
IB/ipoib: Fix mcast list locking
RDMA/mlx5: Expose register c0 for RDMA device
net/mlx5: E-Switch, expose eswitch manager vport
net/mlx5: Manage ICM type of SW encap
RDMA/mlx5: Support handling of SW encap ICM area
net/mlx5: Introduce indirect-sw-encap ICM properties
RDMA/bnxt_re: Adds MSN table capability for Gen P7 adapters
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most interesting thing is probably the networking structs
reorganization and a significant amount of changes is around
self-tests.
Core & protocols:
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up build
time warnings to safeguard against future header changes
This improves TCP performances with many concurrent connections up
to 40%
- Add page-pool netlink-based introspection, exposing the memory
usage and recycling stats. This helps indentify bad PP users and
possible leaks
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
lowers the time taken by connect() for hosts having many active
connections to the same destination
- Refactor the TCP bind conflict code, shrinking related socket
structs
- Refactor TCP SYN-Cookie handling, as a preparation step to allow
arbitrary SYN-Cookie processing via eBPF
- Tune optmem_max for 0-copy usage, increasing the default value to
128KB and namespecifying it
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations
- Reduce extension header parsing overhead at GRO time
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries
- Reorder nftables struct members, to keep data accessed by the
datapath first
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex)
- More data-race annotations
- Extend the diag interface to dump TCP bound-only sockets
- Conditional notification of events for TC qdisc class and actions
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID
- Implement SMCv2.1 virtual ISM device support
- Add support for Batman-avd mulicast packet type
BPF:
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers.
This improves the verifier "instructions processed" metric from
single digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer
experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques
- Support uid/gid options when mounting bpffs
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is
identified by its id
- Extend verifier to allow bpf_refcount_acquire() of a map value
field obtained via direct load which is a use-case needed in
sched_ext
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter
- Support for VLAN tag in XDP hints
- Remove deprecated bpfilter kernel leftovers given the project is
developed in user-space (https://github.com/facebook/bpfilter)
Misc:
- Support for parellel TC self-tests execution
- Increase MPTCP self-tests coverage
- Updated the bridge documentation, including several so-far
undocumented features
- Convert all the net self-tests to run in unique netns, to avoid
random failures due to conflict and allow concurrent runs
- Add TCP-AO self-tests
- Add kunit tests for both cfg80211 and mac80211
- Autogenerate Netlink families documentation from YAML spec
- Add yml-gen support for fixed headers and recursive nests, the tool
can now generate user-space code for all genetlink families for
which we have specs
- A bunch of additional module descriptions fixes
- Catch incorrect freeing of pages belonging to a page pool
Driver API:
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host
- Add support for ethtool symmetric-xor RSS hash
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute
- Convert older drivers to platform remove callback returning void
- Add support for PHY package MMD read/write
New hardware / drivers:
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed:
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Driver updates:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running
timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will
allow in future releases combining multiple PFs devices
attached to different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion
for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications
for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring
param, coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine
driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync"
* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
lan78xx: remove redundant statement in lan78xx_get_eee
lan743x: remove redundant statement in lan743x_ethtool_get_eee
bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
tcp: Revert no longer abort SYN_SENT when receiving some ICMP
Revert "mlx5 updates 2023-12-20"
Revert "net: stmmac: Enable Per DMA Channel interrupt"
ipvlan: Remove usage of the deprecated ida_simple_xx() API
ipvlan: Fix a typo in a comment
net/sched: Remove ipt action tests
net: stmmac: Use interrupt mode INTM=1 for per channel irq
net: stmmac: Add support for TX/RX channel interrupt
net: stmmac: Make MSI interrupt routine generic
dt-bindings: net: snps,dwmac: per channel irq
net: phy: at803x: make read_status more generic
net: phy: at803x: add support for cdt cross short test for qca808x
net: phy: at803x: refactor qca808x cable test get status function
net: phy: at803x: generalize cdt fault length function
net: ethernet: cortina: Drop TSO support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull afs updates from David Howells:
"The majority of the patches are aimed at fixing and improving the AFS
filesystem's rotation over server IP addresses, but there are also
some fixes from Oleg Nesterov for the use of read_seqbegin_or_lock().
- Fix fileserver probe handling so that the next round of probes
doesn't break ongoing server/address rotation by clearing all the
probe result tracking. This could occasionally cause the rotation
algorithm to drop straight through, give a 'successful' result
without actually emitting any RPC calls, leaving the reply buffer
in an undefined state.
Instead, detach the probe results into a separate struct and
allocate a new one each time we start probing and update the
pointer to it. Probes are also sent in order of address preference
to try and improve the chance that the preferred one will complete
first.
- Fix server rotation so that it uses configurable address
preferences across on the probes that have completed so far than
ranking them by RTT as the latter doesn't necessarily give the best
route. The preference list can be altered by writing into
/proc/net/afs/addr_prefs.
- Fix the handling of Read-Only (and Backup) volume callbacks as
there is one per volume, not one per file, so if someone performs a
command that, say, offlines the volume but doesn't change it, when
it comes back online we don't spam the server with a status fetch
for every vnode we're using. Instead, check the Creation timestamp
in the VolSync record when prompted by a callback break.
- Handle volume regression (ie. a RW volume being restored from a
backup) by scrubbing all cache data for that volume. This is
detected from the VolSync creation timestamp.
- Adjust abort handling and abort -> error mapping to match better
with what other AFS clients do.
- Fix offline and busy volume state handling as they only apply to
individual server instances and not entire volumes and the rotation
algorithm should go and look at other servers if available. Also
make it sleep briefly before each retry if all the volume instances
are unavailable"
* tag 'afs-fix-rotation-20240105' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (40 commits)
afs: trace: Log afs_make_call(), including server address
afs: Fix offline and busy message emission
afs: Fix fileserver rotation
afs: Overhaul invalidation handling to better support RO volumes
afs: Parse the VolSync record in the reply of a number of RPC ops
afs: Don't leave DONTUSE/NEWREPSITE servers out of server list
afs: Fix comment in afs_do_lookup()
afs: Apply server breaks to mmap'd files in the call processor
afs: Move the vnode/volume validity checking code into its own file
afs: Defer volume record destruction to a workqueue
afs: Make it possible to find the volumes that are using a server
afs: Combine the endpoint state bools into a bitmask
afs: Keep a record of the current fileserver endpoint state
afs: Dispatch vlserver probes in priority order
afs: Dispatch fileserver probes in priority order
afs: Mark address lists with configured priorities
afs: Provide a way to configure address priorities
afs: Remove the unimplemented afs_cmp_addr_list()
afs: Add some more info to /proc/net/afs/servers
rxrpc: Create a procfile to display outstanding client conn bundles
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Add Jan Kara as VFS reviewer
- Show correct device and inode numbers in proc/<pid>/maps for vma
files on stacked filesystems. This is now easily doable thanks to
the backing file work from the last cycles. This comes with
selftests
Cleanups:
- Remove a redundant might_sleep() from wait_on_inode()
- Initialize pointer with NULL, not 0
- Clarify comment on access_override_creds()
- Rework and simplify eventfd_signal() and eventfd_signal_mask()
helpers
- Process aio completions in batches to avoid needless wakeups
- Completely decouple struct mnt_idmap from namespaces. We now only
keep the actual idmapping around and don't stash references to
namespaces
- Reformat maintainer entries to indicate that a given subsystem
belongs to fs/
- Simplify fput() for files that were never opened
- Get rid of various pointless file helpers
- Rename various file helpers
- Rename struct file members after SLAB_TYPESAFE_BY_RCU switch from
last cycle
- Make relatime_need_update() return bool
- Use GFP_KERNEL instead of GFP_USER when allocating superblocks
- Replace deprecated ida_simple_*() calls with their current ida_*()
counterparts
Fixes:
- Fix comments on user namespace id mapping helpers. They aren't
kernel doc comments so they shouldn't be using /**
- s/Retuns/Returns/g in various places
- Add missing parameter documentation on can_move_mount_beneath()
- Rename i_mapping->private_data to i_mapping->i_private_data
- Fix a false-positive lockdep warning in pipe_write() for watch
queues
- Improve __fget_files_rcu() code generation to improve performance
- Only notify writer that pipe resizing has finished after setting
pipe->max_usage otherwise writers are never notified that the pipe
has been resized and hang
- Fix some kernel docs in hfsplus
- s/passs/pass/g in various places
- Fix kernel docs in ntfs
- Fix kcalloc() arguments order reported by gcc 14
- Fix uninitialized value in reiserfs"
* tag 'vfs-6.8.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (36 commits)
reiserfs: fix uninit-value in comp_keys
watch_queue: fix kcalloc() arguments order
ntfs: dir.c: fix kernel-doc function parameter warnings
fs: fix doc comment typo fs tree wide
selftests/overlayfs: verify device and inode numbers in /proc/pid/maps
fs/proc: show correct device and inode numbers in /proc/pid/maps
eventfd: Remove usage of the deprecated ida_simple_xx() API
fs: super: use GFP_KERNEL instead of GFP_USER for super block allocation
fs/hfsplus: wrapper.c: fix kernel-doc warnings
fs: add Jan Kara as reviewer
fs/inode: Make relatime_need_update return bool
pipe: wakeup wr_wait after setting max_usage
file: remove __receive_fd()
file: stop exposing receive_fd_user()
fs: replace f_rcuhead with f_task_work
file: remove pointless wrapper
file: s/close_fd_get_file()/file_close_fd()/g
Improve __fget_files_rcu() code generation (and thus __fget_light())
file: massage cleanup of files that failed to open
fs/pipe: Fix lockdep false-positive in watchqueue pipe_write()
...
|
|
Instead of using two bools derived from a flags passed as arguments to
the parent function of tc_action_load_ops, just pass the flags itself
to tc_action_load_ops to simplify its parameters.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
e009b2efb7a8 ("bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()")
0f2b21477988 ("bnxt_en: Fix compile error without CONFIG_RFS_ACCEL")
https://lore.kernel.org/all/20240105115509.225aa8a2@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/wpan/wpan-next
Miquel Raynal says:
====================
This pull request mainly brings support for dynamic associations in
the WPAN world. Thanks to the recent improvements it was possible to
discover nearby devices, it is now also possible to associate with them
to form a sub-network using a specific PAN ID. The support includes
several functions, such as:
* Requesting an association to a coordinator, waiting for the response
* Sending a disassociation notification to a coordinator
* Receiving an association request when we are coordinator, answering
the request (for now all devices are accepted up to a limit, to be
refined)
* Sending a disassociation notification to a child
* Users may request the list of associated devices (the parent and the
children).
Here are a few example of userspace calls that can be made:
# iwpan dev <dev> associate pan_id 2 coord $COORD
# iwpan dev <dev> list_associations
# iwpan dev <dev> disassociate ext_addr $COORD
There are as well two patches from Uwe turning remove callbacks into
void functions.
* tag 'ieee802154-for-net-next-2023-12-20' of gitolite.kernel.org:pub/scm/linux/kernel/git/wpan/wpan-next:
mac802154: Avoid new associations while disassociating
ieee802154: Avoid confusing changes after associating
mac802154: Only allow PAN controllers to process association requests
mac802154: Use the PAN coordinator parameter when stamping packets
mac80254: Provide real PAN coordinator info in beacons
ieee802154: Give the user the association list
mac802154: Handle disassociation notifications from peers
mac802154: Follow the number of associated devices
ieee802154: Add support for limiting the number of associated devices
mac802154: Handle association requests from peers
mac802154: Handle disassociations
ieee802154: Add support for user disassociation requests
mac802154: Handle associating
ieee802154: Add support for user association requests
ieee802154: Internal PAN management
ieee802154: Let PAN IDs be reset
ieee802154: hwsim: Convert to platform remove callback returning void
ieee802154: fakelb: Convert to platform remove callback returning void
====================
Link: https://lore.kernel.org/r/20231220095556.4d9cef91@xps-13
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
User won't care about inproper hash options in the TCP header if they
don't use neither TCP-AO nor TCP-MD5. Yet, those logs can add up in
syslog, while not being a real concern to the host admin:
> kernel: TCP: TCP segment has incorrect auth options set for XX.20.239.12.54681->XX.XX.90.103.80 [S]
Keep silent and avoid logging when there aren't any keys in the system.
Side-note: I also defined static_branch_tcp_*() helpers to avoid more
ifdeffery, going to remove more ifdeffery further with their help.
Reported-by: Christian Kujau <lists@nerdbynature.de>
Closes: https://lore.kernel.org/all/f6b59324-1417-566f-a976-ff2402718a8d@nerdbynature.de/
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Fixes: 2717b5adea9e ("net/tcp: Add tcp_hash_fail() ratelimited logs")
Link: https://lore.kernel.org/r/20240104-tcp_hash_fail-logs-v1-1-ff3e1f6f9e72@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Bound actions always return '0' and as of today we rely on '0'
being returned in order to properly skip bound actions in
tcf_idr_insert_many. In order to further improve maintainability,
introduce the ACT_P_BOUND return code.
Actions are updated to return 'ACT_P_BOUND' instead of plain '0'.
tcf_idr_insert_many is then updated to check for 'ACT_P_BOUND'.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231229132642.1489088-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When fib_default_rule_add is invoked, the value of the input parameter
'flags' is always 0. Rules uses kzalloc to allocate memory, so 'flags' has
been initialized to 0. Therefore, remove the input parameter 'flags' in
fib_default_rule_add.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240102071519.3781384-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ice driver fails to build when CONFIG_XDP_SOCKETS is disabled.
drivers/net/ethernet/intel/ice/ice_base.c:533:21: error:
variable has incomplete type 'struct xsk_cb_desc'
struct xsk_cb_desc desc = {};
^
include/net/xsk_buff_pool.h:15:8: note:
forward declaration of 'struct xsk_cb_desc'
struct xsk_cb_desc;
^
Fixes: d68d707dcbbf ("ice: Support XDP hints in AF_XDP ZC mode")
Closes: https://lore.kernel.org/netdev/8b76dad3-8847-475b-aa17-613c9c978f7a@infradead.org/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20231219110205.1289506-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- btnxpuart: Fix recv_buf return value
- L2CAP: Fix responding with multiple rejects
- Fix atomicity violation in {min,max}_key_size_set
- ISO: Allow binding a PA sync socket
- ISO: Reassociate a socket with an active BIS
- ISO: Avoid creating child socket if PA sync is terminating
- Add device 13d3:3572 IMC Networks Bluetooth Radio
- Don't suspend when there are connections
- Remove le_restart_scan work
- Fix bogus check for re-auth not supported with non-ssp
- lib: Add documentation to exported functions
- Support HFP offload for QCA2066
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.8
The third "new features" pull request for v6.8. This is a smaller one
to clear up our tree before the break and nothing really noteworthy
this time.
Major changes:
stack
* cfg80211: introduce cfg80211_ssid_eq() for SSID matching
* cfg80211: support P2P operation on DFS channels
* mac80211: allow 64-bit radiotap timestamps
iwlwifi
* AX210: allow concurrent P2P operation on DFS channels
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The tc ipt action was intended to run all netfilter/iptables target.
Unfortunately it has not benefitted over the years from proper updates when
netfilter changes, and for that reason it has remained rudimentary.
Pinging a bunch of people that i was aware were using this indicates that
removing it wont affect them.
Retire it to reduce maintenance efforts. Buh-bye.
Reviewed-by: Victor Noguiera <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
netfilter pull request 23-12-22
The following patchset contains Netfilter updates for net-next:
1) Add locking for NFT_MSG_GETSETELEM_RESET requests, to address a
race scenario with two concurrent processes running a dump-and-reset
which exposes negative counters to userspace, from Phil Sutter.
2) Use GFP_KERNEL in pipapo GC, from Florian Westphal.
3) Reorder nf_flowtable struct members, place the read-mostly parts
accessed by the datapath first. From Florian Westphal.
4) Set on dead flag for NFT_MSG_NEWSET in abort path,
from Florian Westphal.
5) Support filtering zone in ctnetlink, from Felix Huettner.
6) Bail out if user tries to redefine an existing chain with different
type in nf_tables.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As explained in commit e03781879a0d ("drop_monitor: Require
'CAP_SYS_ADMIN' when joining "events" group"), the "flags" field in the
multicast group structure reuses uAPI flags despite the field not being
exposed to user space. This makes it impossible to extend its use
without adding new uAPI flags, which is inappropriate for internal
kernel checks.
Solve this by adding internal flags (i.e., "GENL_MCAST_*") and convert
the existing users to use them instead of the uAPI flags.
Tested using the reproducers in commit 44ec98ea5ea9 ("psample: Require
'CAP_NET_ADMIN' when joining "packets" group") and commit e03781879a0d
("drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group").
No functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablu Neira Syuso says:
====================
netfilter pull request 23-12-20
The following patchset contains Netfilter fixes for net:
1) Skip set commit for deleted/destroyed sets, this might trigger
double deactivation of expired elements.
2) Fix packet mangling from egress, set transport offset from
mac header for netdev/egress.
Both fixes address bugs already present in several releases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the iucv_bus variable to be a constant structure as well, placing
it into read-only memory which can not be modified at runtime.
Cc: Wenjia Zhang <wenjia@linux.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-s390@vger.kernel.org
Cc: netdev@vger.kernel.org
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove a couple of kerneldoc entries for struct members that do not exist,
addressing these warnings:
./include/net/sock.h:548: warning: Excess struct member '__sk_flags_offset' description in 'sock'
./include/net/sock.h:548: warning: Excess struct member 'sk_padding' description in 'sock'
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Offloading MACsec in PHYs requires inserting the SecTAG and the ICV in
the ethernet frame. This operation will increase the frame size with up
to 32 bytes. If the frames are sent at line rate, the PHY will not have
enough room to insert the SecTAG and the ICV.
Some PHYs use a hardware buffer to store a number of ethernet frames and,
if it fills up, a pause frame is sent to the MAC to control the flow.
This HW implementation does not need any modification in the stack.
Other PHYs might offer to use a specific ethertype with some padding
bytes present in the ethernet frame. This ethertype and its associated
bytes will be replaced by the SecTAG and ICV.
mdo_insert_tx_tag allows the PHY drivers to add any specific tag in the
skb.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add description for fields of struct macsec_context and struct
macsec_ops.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move sci_to_cpu to the MACsec header to use it in drivers.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
So far the mirred action has dealt with syntax that handles
mirror/redirection for netdev. A matching packet is redirected or mirrored
to a target netdev.
In this patch we enable mirred to mirror to a tc block as well.
IOW, the new syntax looks as follows:
... mirred <ingress | egress> <mirror | redirect> [index INDEX] < <blockid BLOCKID> | <dev <devname>> >
Examples of mirroring or redirecting to a tc block:
$ tc filter add block 22 protocol ip pref 25 \
flower dst_ip 192.168.0.0/16 action mirred egress mirror blockid 22
$ tc filter add block 22 protocol ip pref 25 \
flower dst_ip 10.10.10.10/32 action mirred egress redirect blockid 22
Co-developed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Co-developed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The datapath can now find the block of the port in which the packet arrived
at.
In the next patch we show a possible usage of this patch in a new
version of mirred that multicasts to all ports except for the port in
which the packet arrived on.
Co-developed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Co-developed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit makes tc blocks track which ports have been added to them.
And, with that, we'll be able to use this new information to send
packets to the block's ports. Which will be done in the patch #3 of this
series.
Suggested-by: Jiri Pirko <jiri@nvidia.com>
Co-developed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Co-developed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since there are no more users of the macro let's finally
burn it
Signed-off-by: Denis Kirjanov <dkirjanov@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The System EID (SEID) is an internal EID that is used by the SMCv2
software stack that has a predefined and constant value representing
the s390 physical machine that the OS is executing on. So it should
be managed by SMC stack instead of ISM driver and be consistent for
all ISMv2 device (including virtual ISM devices) on s390 architecture.
Suggested-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-and-tested-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to virtual ISM support feature defined by SMCv2.1, GIDs of
virtual ISM device are UUIDs defined by RFC4122, which are 128-bits
long. So some adaptation work is required. And note that the GIDs of
existing platform firmware ISM devices still remain 64-bits long.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change rxrpc's API such that:
(1) A new function, rxrpc_kernel_lookup_peer(), is provided to look up an
rxrpc_peer record for a remote address and a corresponding function,
rxrpc_kernel_put_peer(), is provided to dispose of it again.
(2) When setting up a call, the rxrpc_peer object used during a call is
now passed in rather than being set up by rxrpc_connect_call(). For
afs, this meenat passing it to rxrpc_kernel_begin_call() rather than
the full address (the service ID then has to be passed in as a
separate parameter).
(3) A new function, rxrpc_kernel_remote_addr(), is added so that afs can
get a pointer to the transport address for display purposed, and
another, rxrpc_kernel_remote_srx(), to gain a pointer to the full
rxrpc address.
(4) The function to retrieve the RTT from a call, rxrpc_kernel_get_srtt(),
is then altered to take a peer. This now returns the RTT or -1 if
there are insufficient samples.
(5) Rename rxrpc_kernel_get_peer() to rxrpc_kernel_call_get_peer().
(6) Provide a new function, rxrpc_kernel_get_peer(), to get a ref on a
peer the caller already has.
This allows the afs filesystem to pin the rxrpc_peer records that it is
using, allowing faster lookups and pointer comparisons rather than
comparing sockaddr_rxrpc contents. It also makes it easier to get hold of
the RTT. The following changes are made to afs:
(1) The addr_list struct's addrs[] elements now hold a peer struct pointer
and a service ID rather than a sockaddr_rxrpc.
(2) When displaying the transport address, rxrpc_kernel_remote_addr() is
used.
(3) The port arg is removed from afs_alloc_addrlist() since it's always
overridden.
(4) afs_merge_fs_addr4() and afs_merge_fs_addr6() do peer lookup and may
now return an error that must be handled.
(5) afs_find_server() now takes a peer pointer to specify the address.
(6) afs_find_server(), afs_compare_fs_alists() and afs_merge_fs_addr[46]{}
now do peer pointer comparison rather than address comparison.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Now all sockets including TIME_WAIT are linked to bhash2 using
sock_common.skc_bind_node.
We no longer use inet_bind2_bucket.deathrow, sock.sk_bind2_node,
and inet_timewait_sock.tw_bind2_node.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now we can use sk_bind_node/tw_bind_node for bhash2, which means
we need not link TIME_WAIT sockets separately.
The dead code and sk_bind2_node will be removed in the next patch.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now we do not use tb->owners and can unlink sockets from bhash.
sk_bind_node/tw_bind_node are available for bhash2 and will be
used in the following patch.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
bhash2 added a new member sk_bind2_node in struct sock to link
sockets to bhash2 in addition to bhash.
bhash is still needed to search conflicting sockets efficiently
from a port for the wildcard address. However, bhash itself need
not have sockets.
If we link each bhash2 bucket to the corresponding bhash bucket,
we can iterate the same set of the sockets from bhash2 via bhash.
This patch links bhash2 to bhash only, and the actual use will be
in the later patches. Finally, we will remove sk_bind2_node.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
inet_bind2_bucket_addr_match() and inet_bind2_bucket_match_addr_any()
are called for each bhash2 bucket to check conflicts. Thus, we call
ipv6_addr_any() and ipv6_addr_v4mapped() over and over during bind().
Let's avoid calling them by saving the address type in inet_bind2_bucket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In bhash2, IPv4/IPv6 addresses are saved in two union members,
which complicate address checks in inet_bind2_bucket_addr_match()
and inet_bind2_bucket_match_addr_any() considering uninitialised
memory and v4-mapped-v6 conflicts.
Let's simplify that by saving IPv4 address as v4-mapped-v6 address
and defining tb2.rcv_saddr as tb2.v6_rcv_saddr.s6_addr32[3].
Then, we can compare v6 address as is, and after checking v4-mapped-v6,
we can compare v4 address easily. Also, we can remove tb2->family.
Note these functions will be further refactored in the next patch.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts 19f8def031bfa50c579149b200bfeeb919727b27
"Bluetooth: Fix auth_complete_evt for legacy units" which seems to be
working around a bug on a broken controller rather then any limitation
imposed by the Bluetooth spec, in fact if there ws not possible to
re-auth the command shall fail not succeed.
Fixes: 19f8def031bf ("Bluetooth: Fix auth_complete_evt for legacy units")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This removes le_restart_scan work and instead just disables controller
duplicate filtering when discovery result_filtering is enabled and
HCI_QUIRK_STRICT_DUPLICATE_FILTER is set.
Link: https://github.com/bluez/bluez/issues/573
Link: https://github.com/bluez/bluez/issues/572
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
For ISO Broadcast, all BISes from a BIG have the same lifespan - they
cannot be created or terminated independently from each other.
This links together all BIS hcons that are part of the same BIG, so all
hcons are kept alive as long as the BIG is active.
If multiple BIS sockets are opened for a BIG handle, and only part of
them are closed at some point, the associated hcons will be marked as
open. If new sockets will later be opened for the same BIG, they will
be reassociated with the open BIS hcons.
All BIS hcons will be cleaned up and the BIG will be terminated when
the last BIS socket is closed from userspace.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Place the read-mostly parts accessed by the datapath first.
In particular, we do access ->flags member (to see if HW offload
is enabled) for every single packet, but this is placed in the 5th
cacheline.
priority could stay where it is, but move it too to cover a hole.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Cross-merge networking fixes after downstream PR.
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c
23c93c3b6275 ("bnxt_en: do not map packet buffers twice")
6d1add95536b ("bnxt_en: Modify TX ring indexing logic.")
tools/testing/selftests/net/Makefile
2258b666482d ("selftests: add vlan hw filter tests")
a0bc96c0cd6e ("selftests: net: verify fq per-band packet limit")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|