summaryrefslogtreecommitdiff
path: root/include/rdma
AgeCommit message (Collapse)AuthorFilesLines
2012-01-04rdma/core: Fix sparse warningsSean Hefty2-1/+4
Clean up sparse warnings in the rdma core layer. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-11-01Merge branch 'for-linus' of ↵Linus Torvalds5-6/+156
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (62 commits) mlx4_core: Deprecate log_num_vlan module param IB/mlx4: Don't set VLAN in IBoE WQEs' control segment IB/mlx4: Enable 4K mtu for IBoE RDMA/cxgb4: Mark QP in error before disabling the queue in firmware RDMA/cxgb4: Serialize calls to CQ's comp_handler RDMA/cxgb3: Serialize calls to CQ's comp_handler IB/qib: Fix issue with link states and QSFP cables IB/mlx4: Configure extended active speeds mlx4_core: Add extended port capabilities support IB/qib: Hold links until tuning data is available IB/qib: Clean up checkpatch issue IB/qib: Remove s_lock around header validation IB/qib: Precompute timeout jiffies to optimize latency IB/qib: Use RCU for qpn lookup IB/qib: Eliminate divide/mod in converting idx to egr buf pointer IB/qib: Decode path MTU optimization IB/qib: Optimize RC/UC code by IB operation IPoIB: Use the right function to do DMA unmap pages RDMA/cxgb4: Use correct QID in insert_recv_cqe() RDMA/cxgb4: Make sure flush CQ entries are collected on connection close ...
2011-11-01Merge branches 'amso1100', 'cma', 'cxgb3', 'cxgb4', 'fdr', 'ipath', 'ipoib', ↵Roland Dreier5-6/+156
'misc', 'mlx4', 'misc', 'nes', 'qib' and 'xrc' into for-next
2011-10-13RDMA/uverbs: Export ib_open_qp() capability to user spaceSean Hefty1-1/+13
Allow processes that share the same XRC domain to open an existing shareable QP. This permits those processes to receive events on the shared QP and transfer ownership, so that any process may modify the QP. The latter allows the creating process to exit, while a remaining process can still transition it for path migration purposes. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13RDMA/core: Export ib_open_qp() to share XRC TGT QPsSean Hefty1-6/+24
XRC TGT QPs are shared resources among multiple processes. Since the creating process may exit, allow other processes which share the same XRC domain to open an existing QP. This allows us to transfer ownership of an XRC TGT QP to another process. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13RDMA/ucm: Allow user to specify QP type when creating idSean Hefty1-1/+2
Allow the user to indicate the QP type separately from the port space when allocating an rdma_cm_id. With RDMA_PS_IB, there is no longer a 1:1 relationship between the QP type and port space, so we need to switch on the QP type to select between UD and connected QPs. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13RDMA/cm: Define new RDMA port space specific to IBSean Hefty1-0/+1
Add RDMA_PS_IB. XRC QP types will use the IB port space when operating over the RDMA CM. For the 'IP protocol' field value, we select 0x3F, which is listed as being for 'any local network'. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13RDMA/uverbs: Export XRC SRQs to user spaceSean Hefty1-2/+17
We require additional information to create XRC SRQs than we can exchange using the existing create SRQ ABI. Provide an enhanced create ABI for extended SRQ types. Based on patches by Jack Morgenstein <jackm@dev.mellanox.co.il> and Roland Dreier <roland@purestorage.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13RDMA/uverbs: Export XRC domains to user spaceSean Hefty2-1/+20
Allow user space to create XRC domains. Because XRCDs are expected to be shared among multiple processes, we use inodes to identify an XRCD. Based on patches by Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13RDMA/verbs: Cleanup XRC TGT QPs when destroying XRCDSean Hefty1-1/+16
XRC TGT QPs are intended to be shared among multiple users and processes. Allow the destruction of an XRC TGT QP to be done explicitly through ib_destroy_qp() or when the XRCD is destroyed. To support destroying an XRC TGT QP, we need to track TGT QPs with the XRCD. When the XRCD is destroyed, all tracked XRC TGT QPs are also cleaned up. To avoid stale reference issues, if a user is holding a reference on a TGT QP, we increment a reference count on the QP. The user releases the reference by calling ib_release_qp. This releases any access to the QP from a user above verbs, but allows the QP to continue to exist until destroyed by the XRCD. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13RDMA/core: Add XRC QPsSean Hefty1-1/+8
XRC ("eXtended reliable connected") is an IB transport that provides better scalability by allowing senders to specify which shared receive queue (SRQ) should be used to receive a message, which essentially allows one transport context (QP connection) to serve multiple destinations (as long as they share an adapter, of course). XRC communication is between an initiator (INI) QP and a target (TGT) QP. Target QPs are associated with SRQs through an XRCD. An XRC TGT QP behaves like a receive-only RD QP. XRC INI QPs behave similarly to RC QPs, except that work requests posted to an XRC INI QP must specify the remote SRQ that is the target of the work request. We define two new QP types for XRC, to distinguish between INI and TGT QPs, and update the core layer to support XRC QPs. This patch is derived from work by Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13RDMA/core: Add XRC SRQ typeSean Hefty1-1/+17
XRC ("eXtended reliable connected") is an IB transport that provides better scalability by allowing senders to specify which shared receive queue (SRQ) should be used to receive a message, which essentially allows one transport context (QP connection) to serve multiple destinations (as long as they share an adapter, of course). XRC defines SRQs that are specifically used by XRC connections. Expand the SRQ code to support XRC SRQs. An XRC SRQ is currently restricted to only XRC use according to the IB XRC Annex. Portions of this patch were derived from work by Jack Morgenstein <jackm@dev.mellanox.co.il>. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13RDMA/core: Add SRQ type fieldSean Hefty1-0/+6
Currently, there is only a single ("basic") type of SRQ, but with XRC support we will add a second. Prepare for this by defining an SRQ type and setting all current users to IB_SRQT_BASIC. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-12RDMA/core: Add XRC domain supportSean Hefty1-0/+22
XRC ("eXtended reliable connected") is an IB transport that provides better scalability by allowing senders to specify which shared receive queue (SRQ) should be used to receive a message, which essentially allows one transport context (QP connection) to serve multiple destinations (as long as they share an adapter, of course). A few new concepts are introduced to support this. This patch adds: - A new device capability flag, IB_DEVICE_XRC, which low-level drivers set to indicate that a device supports XRC. - A new object type, XRC domains (struct ib_xrcd), and new verbs ib_alloc_xrcd()/ib_dealloc_xrcd(). XRCDs are used to limit which XRC SRQs an incoming message can target. This patch is derived from work by Jack Morgenstein <jackm@dev.mellanox.co.il>. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-11IB: Add new InfiniBand link speedsMarcel Apfelbaum1-1/+17
Introduce support for the following extended speeds: FDR-10: a Mellanox proprietary link speed which is 10.3125 Gbps with 64b/66b encoding rather than 8b/10b encoding. FDR: IBA extended speed 14.0625 Gbps. EDR: IBA extended speed 25.78125 Gbps. Signed-off-by: Marcel Apfelbaum <marcela@dev.mellanox.co.il> Reviewed-by: Hal Rosenstock <hal@mellanox.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-06RDMA/iwcm: Propagate ird/ord values upwardsKumar Sanghvi1-1/+3
Update struct iw_cm_event to support propagating the ird/ord values upwards to the application. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-09-16net: consolidate and fix ethtool_ops->get_settings callingJiri Pirko1-1/+5
This patch does several things: - introduces __ethtool_get_settings which is called from ethtool code and from drivers as well. Put ASSERT_RTNL there. - dev_ethtool_get_settings() is replaced by __ethtool_get_settings() - changes calling in drivers so rtnl locking is respected. In iboe_get_rate was previously ->get_settings() called unlocked. This fixes it. Also prb_calc_retire_blk_tmo() in af_packet.c had the same problem. Also fixed by calling __dev_get_by_index() instead of dev_get_by_index() and holding rtnl_lock for both calls. - introduces rtnl_lock in bnx2fc_vport_create() and fcoe_vport_create() so bnx2fc_if_create() and fcoe_if_create() are called locked as they are from other places. - use __ethtool_get_settings() in bonding code Signed-off-by: Jiri Pirko <jpirko@redhat.com> v2->v3: -removed dev_ethtool_get_settings() -added ASSERT_RTNL into __ethtool_get_settings() -prb_calc_retire_blk_tmo - use __dev_get_by_index() and lock around it and __ethtool_get_settings() call v1->v2: add missing export_symbol Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> [except FCoE bits] Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-27atomic: use <linux/atomic.h>Arun Sharma2-2/+2
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-19IB/pma: Add include file for IBA performance counters definitionsOr Gerlitz1-0/+156
Move the various definitions and mad structures needed for software implementation of IBA PM agent from the ipath and qib drivers into a single include file, which in turn could be used by more consumers. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-07-19IB/core: Add GID change eventOr Gerlitz1-1/+2
Add IB GID change event type. This is needed for IBoE when the HW driver updates the GID (e.g when new VLANs are added/deleted) table and the change should be reflected to the IB core cache. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-26Merge branch 'for-linus' of ↵Linus Torvalds4-1/+116
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cma: Save PID of ID's owner RDMA/cma: Add support for netlink statistics export RDMA/cma: Pass QP type into rdma_create_id() RDMA: Update exported headers list RDMA/cma: Export enum cma_state in <rdma/rdma_cm.h> RDMA/nes: Add a check for strict_strtoul() RDMA/cxgb3: Don't post zero-byte read if endpoint is going away RDMA/cxgb4: Use completion objects for event blocking IB/srp: Fix integer -> pointer cast warnings IB: Add devnode methods to cm_class and umad_class IB/mad: Return EPROTONOSUPPORT when an RDMA device lacks the QP required IB/uverbs: Add devnode method to set path/mode RDMA/ucma: Add .nodename/.mode to tell userspace where to create device node RDMA: Add netlink infrastructure RDMA: Add error handling to ib_core_init()
2011-05-26RDMA/cma: Add support for netlink statistics exportNir Muchtar1-0/+28
Add callbacks and data types for statistics export of all current devices/ids. The schema for RDMA CM is a series of netlink messages. Each one contains an rdma_cm_stat struct. Additionally, two netlink attributes are created for the addresses for each message (if applicable). Their types used are: RDMA_NL_RDMA_CM_ATTR_SRC_ADDR (The source address for this ID) RDMA_NL_RDMA_CM_ATTR_DST_ADDR (The destination address for this ID) sockaddr_* structs are encapsulated within these attributes. In other words, every transaction contains a series of messages like: -------message 1------- struct rdma_cm_id_stats { __u32 qp_num; __u32 bound_dev_if; __u32 port_space; __s32 pid; __u8 cm_state; __u8 node_type; __u8 port_num; __u8 reserved; } RDMA_NL_RDMA_CM_ATTR_SRC_ADDR attribute - contains the source address RDMA_NL_RDMA_CM_ATTR_DST_ADDR attribute - contains the destination address -------end 1------- -------message 2------- struct rdma_cm_id_stats RDMA_NL_RDMA_CM_ATTR_SRC_ADDR attribute RDMA_NL_RDMA_CM_ATTR_DST_ADDR attribute -------end 2------- Signed-off-by: Nir Muchtar <nirm@voltaire.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-26RDMA/cma: Pass QP type into rdma_create_id()Sean Hefty1-1/+4
The RDMA CM currently infers the QP type from the port space selected by the user. In the future (eg with RDMA_PS_IB or XRC), there may not be a 1-1 correspondence between port space and QP type. For netlink export of RDMA CM state, we want to export the QP type to userspace, so it is cleaner to explicitly associate a QP type to an ID. Modify rdma_create_id() to allow the user to specify the QP type, and use it to make our selections of datagram versus connected mode. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-26RDMA: Update exported headers listRoland Dreier2-0/+6
Various RDMA headers are intended to be exported to userspace, so add them to the headers-y list. Add a (strictly speaking, superfluous) include of <linux/types.h> to avoid a headers_check warning. Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-26RDMA/cma: Export enum cma_state in <rdma/rdma_cm.h>Nir Muchtar1-0/+14
Move cma.c's internal definition of enum cma_state to enum rdma_cm_state in an exported header so that it can be exported via RDMA netlink. Signed-off-by: Nir Muchtar <nirm@voltaire.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds1-6/+7
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1446 commits) macvlan: fix panic if lowerdev in a bond tg3: Add braces around 5906 workaround. tg3: Fix NETIF_F_LOOPBACK error macvlan: remove one synchronize_rcu() call networking: NET_CLS_ROUTE4 depends on INET irda: Fix error propagation in ircomm_lmp_connect_response() irda: Kill set but unused variable 'bytes' in irlan_check_command_param() irda: Kill set but unused variable 'clen' in ircomm_connect_indication() rxrpc: Fix set but unused variable 'usage' in rxrpc_get_transport() be2net: Kill set but unused variable 'req' in lancer_fw_download() irda: Kill set but unused vars 'saddr' and 'daddr' in irlan_provider_connect_indication() atl1c: atl1c_resume() is only used when CONFIG_PM_SLEEP is defined. rxrpc: Fix set but unused variable 'usage' in rxrpc_get_peer(). rxrpc: Kill set but unused variable 'local' in rxrpc_UDP_error_handler() rxrpc: Kill set but unused variable 'sp' in rxrpc_process_connection() rxrpc: Kill set but unused variable 'sp' in rxrpc_rotate_tx_window() pkt_sched: Kill set but unused variable 'protocol' in tc_classify() isdn: capi: Use pr_debug() instead of ifdefs. tg3: Update version to 3.119 tg3: Apply rx_discards fix to 5719/5720 ... Fix up trivial conflicts in arch/x86/Kconfig and net/mac80211/agg-tx.c as per Davem.
2011-05-20RDMA: Add netlink infrastructureRoland Dreier1-0/+64
Add basic RDMA netlink infrastructure that allows for registration of RDMA clients for which data is to be exported and supplies message construction callbacks. Signed-off-by: Nir Muchtar <nirm@voltaire.com> [ Reorganize a few things, add CONFIG_NET dependency. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-10RDMA/iwcm: Get rid of enum iw_cm_event_statusRoland Dreier1-10/+1
The IW_CM_EVENT_STATUS_xxx values were used in only a couple of places; cma.c uses -Exxx values instead, and so do the amso1100, cxgb3 and cxgb4 drivers -- only nes was using the enum values (with the mild consequence that all nes connection failures were treated as generic errors rather than reported as timeouts or rejections). We can fix this confusion by getting rid of enum iw_cm_event_status and using a plain int for struct iw_cm_event.status, and converting nes to use -Exxx as the other iWARP drivers do. This also gets rid of the warning drivers/infiniband/core/cma.c: In function 'cma_iw_handler': drivers/infiniband/core/cma.c:1333:3: warning: case value '4294967185' not in enumerated type 'enum iw_cm_event_status' drivers/infiniband/core/cma.c:1336:3: warning: case value '4294967186' not in enumerated type 'enum iw_cm_event_status' drivers/infiniband/core/cma.c:1332:3: warning: case value '4294967192' not in enumerated type 'enum iw_cm_event_status' Signed-off-by: Roland Dreier <roland@purestorage.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Faisal Latif <faisal.latif@intel.com>
2011-05-10RDMA/cma: Add an ID_REUSEADDR optionHefty, Sean2-2/+13
Lustre requires that clients bind to a privileged port number before connecting to a remote server. On larger clusters (typically more than about 1000 nodes), the number of privileged ports is exhausted, resulting in lustre being unusable. To handle this, we add support for reusable addresses to the rdma_cm. This mimics the behavior of the socket option SO_REUSEADDR. A user may set an rdma_cm_id to reuse an address before calling rdma_bind_addr() (explicitly or implicitly). If set, other rdma_cm_id's may be bound to the same address, provided that they all have reuse enabled, and there are no active listens. If rdma_listen() is called on an rdma_cm_id that has reuse enabled, it will only succeed if there are no other id's bound to that same address. The reuse option is exported to user space. The behavior of the kernel reuse implementation was verified against that given by sockets. This patch is derived from a path by Ira Weiny <weiny2@llnl.gov> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-04-30ethtool: Call ethtool's get/set_settings callbacks with cleaned dataDavid Decotigny1-6/+7
This makes sure that when a driver calls the ethtool's get/set_settings() callback of another driver, the data passed to it is clean. This guarantees that speed_hi will be zeroed correctly if the called callback doesn't explicitely set it: we are sure we don't get a corrupted speed from the underlying driver. We also take care of setting the cmd field appropriately (ETHTOOL_GSET/SSET). This applies to dev_ethtool_get_settings(), which now makes sure it sets up that ethtool command parameter correctly before passing it to drivers. This also means that whoever calls dev_ethtool_get_settings() does not have to clean the ethtool command parameter. This function also becomes an exported symbol instead of an inline. All drivers visible to make allyesconfig under x86_64 have been updated. Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17RDMA: Update workqueue usageTejun Heo1-0/+3
* ib_wq is added, which is used as the common workqueue for infiniband instead of the system workqueue. All system workqueue usages including flush_scheduled_work() callers are converted to use and flush ib_wq. * cancel_delayed_work() + flush_scheduled_work() converted to cancel_delayed_work_sync(). * qib_wq is removed and ib_wq is used instead. This is to prepare for deprecation of flush_scheduled_work(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25IB/core: Add VLAN support for IBoEEli Cohen2-4/+48
Add 802.1q VLAN support to IBoE. The VLAN tag is encoded within the GID derived from a link local address in the following way: GID[11] GID[12] contain the VLAN ID when the GID contains a VLAN. The 3 bits user priority field of the packets are identical to the 3 bits of the SL. In case of rdma_cm apps, the TOS field is used to generate the SL field by doing a shift right of 5 bits effectively taking to 3 MS bits of the TOS field. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25IB/uverbs: Return link layer type to userspace for query port operationEli Cohen1-1/+2
Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-14IB/pack: IBoE UD packet packing supportEli Cohen1-8/+22
Add support for packing IBoE packet headers. Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Clean up and fix ib_ud_header_init() a bit. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-14RDMA/cm: Add RDMA CM support for IBoE devicesEli Cohen1-1/+98
Add support for IBoE device binding and IP --> GID resolution. Path resolving and multicast joining are implemented within cma.c by filling in the responses and running callbacks in the CMA work queue. IP --> GID resolution always yields IPv6 link local addresses; remote GIDs are derived from the destination MAC address of the remote port. Multicast GIDs are always mapped to multicast MACs as is done in IPv6. (IPv4 multicast is enabled by translating IPv4 multicast addresses to IPv6 multicast as described in <http://www.mail-archive.com/ipng@sunroof.eng.sun.com/msg02134.html>.) Some helper functions are added to ib_addr.h. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-28IB/core: Add link layer property to portsEli Cohen1-0/+11
This patch allows ports to have different link layers: IB_LINK_LAYER_INFINIBAND or IB_LINK_LAYER_ETHERNET. This is required for adding IBoE (InfiniBand-over-Ethernet, aka RoCE) support. For devices that do not provide an implementation for querying the link layer property of a port, we return a default value based on the transport: RMA_TRANSPORT_IB nodes will return IB_LINK_LAYER_INFINIBAND and RDMA_TRANSPORT_IWARP nodes will return IB_LINK_LAYER_ETHERNET. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04IB: Rename RAW_ETY to RAW_ETHERTYPEAleksey Senin1-1/+1
Change abbreviated IB_QPT_RAW_ETY to IB_QPT_RAW_ETHERTYPE to make the special QP type easier to understand. cf http://www.mail-archive.com/linux-rdma@vger.kernel.org/msg04530.html Signed-off-by: Aleksey Senin <alekseys@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-21IB/core: Allow device-specific per-port sysfs filesRalph Campbell1-1/+3
Add a new parameter to ib_register_device() so that low-level device drivers can pass in a pointer to a callback function that will be called for each port that is registered in sysfs. This allows low-level device drivers to create files in /sys/class/infiniband/<hca>/ports/<N>/ without having to poke through the internals of the RDMA sysfs handling. There is no need for an unregister function since the kobject reference will go to zero when ib_unregister_device() is called. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-22IB/core: Add support for masked atomic operationsVladimir Sokolovsky1-0/+7
- Add new IB_WR_MASKED_ATOMIC_CMP_AND_SWP and IB_WR_MASKED_ATOMIC_FETCH_AND_ADD send opcodes that can be used to post "masked atomic compare and swap" and "masked atomic fetch and add" work request respectively. - Add masked_atomic_cap capability. - Add mask fields to atomic struct of ib_send_wr - Add new opcodes to ib_wc_opcode The new operations are described more precisely below: * Masked Compare and Swap (MskCmpSwap) The MskCmpSwap atomic operation is an extension to the CmpSwap operation defined in the IB spec. MskCmpSwap allows the user to select a portion of the 64 bit target data for the “compare” check as well as to restrict the swap to a (possibly different) portion. The pseudo code below describes the operation: | atomic_response = *va | if (!((compare_add ^ *va) & compare_add_mask)) then | *va = (*va & ~(swap_mask)) | (swap & swap_mask) | | return atomic_response The additional operands are carried in the Extended Transport Header. Atomic response generation and packet format for MskCmpSwap is as for standard IB Atomic operations. * Masked Fetch and Add (MFetchAdd) The MFetchAdd Atomic operation extends the functionality of the standard IB FetchAdd by allowing the user to split the target into multiple fields of selectable length. The atomic add is done independently on each one of this fields. A bit set in the field_boundary parameter specifies the field boundaries. The pseudo code below describes the operation: | bit_adder(ci, b1, b2, *co) | { | value = ci + b1 + b2 | *co = !!(value & 2) | | return value & 1 | } | | #define MASK_IS_SET(mask, attr) (!!((mask)&(attr))) | bit_position = 1 | carry = 0 | atomic_response = 0 | | for i = 0 to 63 | { | if ( i != 0 ) | bit_position = bit_position << 1 | | bit_add_res = bit_adder(carry, MASK_IS_SET(*va, bit_position), | MASK_IS_SET(compare_add, bit_position), &new_carry) | if (bit_add_res) | atomic_response |= bit_position | | carry = ((new_carry) && (!MASK_IS_SET(compare_add_mask, bit_position))) | } | | return atomic_response Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-03-02Merge branch 'misc' into for-nextRoland Dreier1-0/+1
Conflicts: drivers/infiniband/core/uverbs_main.c
2010-03-02Merge branch 'cma' into for-nextRoland Dreier1-1/+0
2010-02-25IB/core: Fix and clean up ib_ud_header_init()Eli Cohen1-0/+1
ib_ud_header_init() first clears header and then fills up the various fields. Later on, it tests header->immediate_present, which it has already cleared, so the condition is always false. Fix this by adding an immediate_present parameter and setting header->immediate_present as is done with grh_present. Also remove unused calculation of header_len. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-24IB/core: Pack struct ib_device a little tighterAlexander Chiang1-2/+2
A small change to reduce the size of ib_device to 1112 bytes (from 1128). Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-12RDMA/cm: Remove unused definition of RDMA_PS_SCTPSean Hefty1-1/+0
The defined SCTP number is incorrect (0x83, rather than 0x84), and since it is not used anywhere, simply remove the definition. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-16Merge branches 'amso1100', 'cma', 'cxgb3', 'ehca', 'ipath', 'ipoib', 'iser', ↵Roland Dreier5-25/+44
'misc', 'mlx4' and 'nes' into for-next
2009-12-10IB: Clarify the documentation of ib_post_send()Bart Van Assche1-0/+5
Clarify the behavior of ib_post_send() when a list of work requests is passed in and an immediate error is returned. Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-11-20RDMA/cm: fix loopback address supportSean Hefty1-21/+10
The RDMA CM is intended to support the use of a loopback address when establishing a connection; however, the behavior of the CM when loopback addresses are used is confusing and does not always work, depending on whether loopback was specified by the server, the client, or both. The defined behavior of rdma_bind_addr is to associate an RDMA device with an rdma_cm_id, as long as the user specified a non- zero address. (ie they weren't just trying to reserve a port) Currently, if the loopback address is passed to rdam_bind_addr, no device is associated with the rdma_cm_id. Fix this. If a loopback address is specified by the client as the destination address for a connection, it will fail to establish a connection. This is true even if the server is listing across all addresses or on the loopback address itself. The issue is that the server tries to translate the IP address carried in the REQ message to a local net_device address, which fails. The translation is not needed in this case, since the REQ carries the actual HW address that should be used. Finally, cleanup loopback support to be more transport neutral. Replace separate calls to get/set the sgid and dgid from the device address to a single call that behaves correctly depending on the format of the device address. And support both IPv4 and IPv6 address formats. Signed-off-by: Sean Hefty <sean.hefty@intel.com> [ Fixed RDS build by s/ib_addr_get/rdma_addr_get/ - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-11-19IB/addr: Store net_device type instead of translating to RDMA transportSean Hefty1-1/+2
The struct rdma_dev_addr stores net_device address information: the source device address, destination hardware address, and broadcast address. For consistency, store the net_device type rather than converting it to the rdma_node_type. The type indicates the format of the various hardware addresses, which is what we're concerned with, and not the RDMA node type that the address may map to. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-11-19RDMA/cma: Replace net_device pointer with indexSean Hefty1-1/+1
Provide the device interface when resolving route information to ensure that the correct outbound device is used. This will also simplify processing of sin6_scope_id for IPv6 support. Based on work from: David Wilder <dwilder@us.ibm.com> Jason Gunthorpe <jgunthrope@obsidianresearch.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-11-16RDMA/ucma: Add option to manually set IB pathSean Hefty3-2/+26
Export rdma_set_ib_paths to user space to allow applications to manually set the IB path used for connections. This allows alternative ways for a user space application or library to obtain path record information, including retrieving path information from cached data, avoiding direct interaction with the IB SA. The IB SA is a single, centralized entity that can limit scaling on large clusters running MPI applications. Future changes to the rdma cm can expand on this framework to support the full range of features allowed by the IB CM, such as separate forward and reverse paths and APM. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>