summaryrefslogtreecommitdiff
path: root/include/target
AgeCommit message (Collapse)AuthorFilesLines
2021-05-15scsi: target: core: Add configurable IEEE Company ID attributeSergey Samoylenko1-0/+1
Implement an attribute which provides a way to set a company specific WWN in configfs via: target/core/$backstore/$name/wwn/company_id The Open Fabrics Alliance ID 001405h remains the default. Link: https://lore.kernel.org/r/20210420185920.42431-3-s.samoylenko@yadro.com Signed-off-by: Sergey Samoylenko <s.samoylenko@yadro.com> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-05scsi: target: core: Make completion affinity configurableMike Christie1-0/+9
It may not always be best to complete the IO on same CPU as it was submitted on. This commit allows userspace to configure it. This has been useful for vhost-scsi where we have a single thread for submissions and completions. If we force the completion on the submission CPU we may be adding conflicts with what the user has setup in the lower levels with settings like the block layer rq_affinity or the driver's IRQ or softirq (the network's rps_cpus value) settings. We may also want to set it up where the vhost thread runs on CPU N and does its submissions/completions there, and then have LIO do its completion booking on CPU M, but can't configure the lower levels due to issues like using dm-multipath with lots of paths (the path selector can throw commands all over the system because it's only taking into account latency/throughput at its level). The new setting is in: /sys/kernel/config/target/$fabric/$target/param/cmd_completion_affinity Writing: -1 -> Gives the current default behavior of completing on the submission CPU. -2 -> Completes the cmd on the CPU the lower layers sent it to us from. > 0 -> Completes on the CPU userspace has specified. Link: https://lore.kernel.org/r/20210227170006.5077-26-michael.christie@oracle.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-05scsi: target: core: Fix backend pluggingMike Christie2-0/+6
target_core_iblock is plugging and unplugging on every command and this is causing perf issues for drivers that prefer batched cmds. With recent patches we can now take multiple cmds from a fabric driver queue and then pass them down the backend drivers in a batch. This patch adds this support by adding 2 callouts to the backend for plugging and unplugging the device. Subsequent commits will add support for iblock and tcmu device plugging. Link: https://lore.kernel.org/r/20210227170006.5077-22-michael.christie@oracle.com Reviewed-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-05scsi: target: core: Cleanup cmd flag bitsMike Christie1-19/+19
We have a couple holes in the cmd flags definitions. This cleans up the definitions to fix that and make it easier to read. Link: https://lore.kernel.org/r/20210227170006.5077-21-michael.christie@oracle.com Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-05scsi: target: core: Add workqueue based cmd submissionMike Christie2-1/+9
loop and vhost/scsi do their target cmd submission from driver workqueues. This allows them to avoid an issue where the backend may block waiting for resources like tags/requests, mem/locks, etc and that ends up blocking their entire submission path and for the case of vhost-scsi both the submission and completion path. This patch adds a helper drivers can use to submit from a LIO workqueue. This code will then be extended in the next patches to fix the plugging of backend devices. We are only converting vhost/loop initially, but the workqueue based submission will work for other drivers and have similar benefits where the main target loops will not end up blocking one some backend resource. Link: https://lore.kernel.org/r/20210227170006.5077-17-michael.christie@oracle.com Tested-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-05scsi: target: core: Add gfp_t arg to target_cmd_init_cdb()Mike Christie1-2/+3
tcm_loop could be used like a normal block device, so we can't use GFP_KERNEL and should use GFP_NOIO. This adds a gfp_t arg to target_cmd_init_cdb() and converts the users. For every driver but loop GFP_KERNEL is kept. This will also be useful in subsequent patches where loop needs to do target_submit_prep() from interrupt context to get a ref to the se_device, and so it will need to use GFP_ATOMIC. Link: https://lore.kernel.org/r/20210227170006.5077-16-michael.christie@oracle.com Tested-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-05scsi: target: core: Remove target_submit_cmd_map_sgls()Mike Christie1-5/+1
Convert target_submit_cmd() to do its own calls and then remove target_submit_cmd_map_sgls() since no one uses it. Link: https://lore.kernel.org/r/20210227170006.5077-15-michael.christie@oracle.com Tested-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-05scsi: target: core: Break up target_submit_cmd_map_sgls()Mike Christie1-0/+8
This breaks up target_submit_cmd_map_sgls() into 3 helpers: - target_init_cmd(): Do the basic general setup and get a refcount to the session to make sure the caller can execute the cmd. - target_submit_prep(): Do the mapping, cdb processing and get a ref to the LUN. - target_submit(): Pass the cmd to LIO core for execution. The above functions must be used by drivers that either: 1. Rely on LIO for session shutdown synchronization by calling target_stop_session(). 2. Need to map sgls. When the next patches are applied then simple drivers that do not need the extra functionality above can use target_submit_cmd() and not worry about failures being returned and how to handle them, since many drivers were getting this wrong and would have hit refcount bugs. Also, by breaking target_submit_cmd_map_sgls() up into these 3 helper functions, we can allow the later patches to do the init/prep from interrupt context and then do the submission from a workqueue. Link: https://lore.kernel.org/r/20210227170006.5077-5-michael.christie@oracle.com Cc: Bart Van Assche <bvanassche@acm.org> Cc: Juergen Gross <jgross@suse.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Nilesh Javali <njavali@marvell.com> Cc: Michael Cyr <mikecyr@linux.ibm.com> Cc: Chris Boot <bootc@bootc.net> Cc: Felipe Balbi <balbi@kernel.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Tested-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-05scsi: target: core: Rename transport_init_se_cmd()Mike Christie1-1/+1
Rename transport_init_se_cmd() to __target_init_cmd() to reflect that it is more of an internal function that drivers should normally not use and because we are going to add a new init function in the next patches. Link: https://lore.kernel.org/r/20210227170006.5077-4-michael.christie@oracle.com Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-23scsi: target: core: Add cmd length set before cmd completeAleksandr Miloserdov1-0/+1
TCM doesn't properly handle underflow case for service actions. One way to prevent it is to always complete command with target_complete_cmd_with_length(), however it requires access to data_sg, which is not always available. This change introduces target_set_cmd_data_length() function which allows to set command data length before completing it. Link: https://lore.kernel.org/r/20210209072202.41154-2-a.miloserdov@yadro.com Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Aleksandr Miloserdov <a.miloserdov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-27scsi: target: core: Change ASCQ for residual writeAnastasia Kovaleva1-0/+1
According to FCP-4 (9.4.2): If the command requested that data beyond the length specified by the FCP_DL field be transferred, then the device server shall set the FCP_RESID_OVER bit (see 9.5.8) to one in the FCP_RSP IU and: a) process the command normally except that data beyond the FCP_DL count shall not be requested or transferred; b) transfer no data and return CHECK CONDITION status with the sense key set to ILLEGAL REQUEST and the additional sense code set to INVALID FIELD IN COMMAND INFORMATION UNIT; or c) may transfer data and return CHECK CONDITION status with the sense key set to ABORTED COMMAND and the additional sense code set to INVALID FIELD IN COMMAND INFORMATION UNIT. TCM follows b) and transfers no data for residual writes but returns INVALID FIELD IN CDB instead of INVALID FIELD IN COMMAND INFORMATION UNIT. Change the ASCQ to INVALID FIELD IN COMMAND INFORMATION UNIT to meet the standard. Link: https://lore.kernel.org/r/20201203082035.54566-4-a.kovaleva@yadro.com Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-05scsi: target: Make state_list per CPUMike Christie1-2/+11
Do a state_list/execute_task_lock per CPU, so we can do submissions from different CPUs without contention with each other. Note: tcm_fc was passing TARGET_SCF_USE_CPUID, but never set cpuid. The assumption is that it wanted to set the cpuid to the CPU it was submitting from so it will get this behavior with this patch. [mkp: s/printk/pr_err/ + resolve COMPARE AND WRITE patch conflict] Link: https://lore.kernel.org/r/1604257174-4524-8-git-send-email-michael.christie@oracle.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-05scsi: target: Drop sess_cmd_lock from I/O pathMike Christie2-4/+4
Drop the sess_cmd_lock by: - Removing the sess_cmd_list use from LIO core, because it's been moved to qla2xxx. - Removing sess_tearing_down check in the I/O path. Instead of using that bit and the sess_cmd_lock, we rely on the cmd_count percpu ref. To do this we switch to percpu_ref_kill_and_confirm/percpu_ref_tryget_live. Link: https://lore.kernel.org/r/1604257174-4524-7-git-send-email-michael.christie@oracle.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-05scsi: target: Remove TARGET_SCF_LOOKUP_LUN_FROM_TAGMike Christie1-1/+0
TARGET_SCF_LOOKUP_LUN_FROM_TAG is no longer used so remove it. Link: https://lore.kernel.org/r/1604257174-4524-5-git-send-email-michael.christie@oracle.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-05scsi: target: Rename cmd.bad_sector to cmd.sense_infoDavid Disseldorp1-1/+1
cmd.bad_sector currently gets packed into the sense INFORMATION field for TCM_LOGICAL_BLOCK_{GUARD,APP_TAG,REF_TAG}_CHECK_FAILED errors, which carry an .add_sector_info flag in the sense_detail_table to ensure this. In preparation for propagating a byte offset on COMPARE AND WRITE TCM_MISCOMPARE_VERIFY error, rename cmd.bad_sector to cmd.sense_info and sense_detail.add_sector_info to sense_detail.add_sense_info so that it better reflects the sense INFORMATION field destination. [ddiss: update previously overlooked ib_isert] Link: https://lore.kernel.org/r/20201031233211.5207-3-ddiss@suse.de Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-05scsi: target: Make iscsit_register_transport() return voidMax Gurtovoy1-1/+1
This function always returns 0. We can make it return void to simplify the code. Also, no caller ever checks the return value of this function. Link: https://lore.kernel.org/r/20200803150008.83920-1-maxg@mellanox.com Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-29scsi: target: Add tmr_notify backend functionBodo Stroesser2-0/+3
Target core is modified to call an optional backend callback function if a TMR is received or commands are aborted implicitly after a PR command was received. The backend function takes as parameters the se_dev, the type of the TMR, and the list of aborted commands. If no commands were aborted, an empty list is supplied. Link: https://lore.kernel.org/r/20200726153510.13077-3-bstroesser@ts.fujitsu.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-29scsi: target: iscsi: Fix login error when receivingHou Pu1-4/+5
iscsi_target_sk_data_ready() could be invoked indirectly by iscsi_target_do_login_rx() from the workqueue like this: iscsi_target_do_login_rx() iscsi_target_do_login() iscsi_target_do_tx_login_io() iscsit_put_login_tx() iscsi_login_tx_data() tx_data() sock_sendmsg_nosec() tcp_sendmsg() release_sock() sk_backlog_rcv() tcp_v4_do_rcv() tcp_data_ready() iscsi_target_sk_data_ready() At that time LOGIN_FLAGS_READ_ACTIVE is not cleared and iscsi_target_sk_data_ready will not read data from the socket. Some iscsi initiators (libiscsi) will wait forever for a reply. LOGIN_FLAGS_READ_ACTIVE should be cleared early just after doing the receive and before writing to the socket in iscsi_target_do_login_rx. Unfortunately, LOGIN_FLAGS_READ_ACTIVE is also used by sk_state_change to do login cleanup if a socket was closed at login time. It is supposed to be cleared after the login PDU is successfully processed and replied. Introduce another flag, LOGIN_FLAGS_WRITE_ACTIVE, to cover the transmit part. Link: https://lore.kernel.org/r/20200716100212.4237-2-houpu@bytedance.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Hou Pu <houpu@bytedance.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-10scsi: target: Rename target_setup_cmd_from_cdb() to target_cmd_parse_cdb()Sudhakar Panneerselvam1-1/+1
This commit also removes the unused argument, cdb, that was passed to this function. Link: https://lore.kernel.org/r/1591559913-8388-5-git-send-email-sudhakar.panneerselvam@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-10scsi: target: Initialize LUN in transport_init_se_cmd()Sudhakar Panneerselvam1-3/+3
Initialization of orig_fe_lun is moved to transport_init_se_cmd() from transport_lookup_cmd_lun(). This helps for the cases where the SCSI request fails before the call to transport_lookup_cmd_lun() so that trace_target_cmd_complete() can print the LUN information to the trace buffer. Due to this change, the lun parameter is removed from transport_lookup_cmd_lun() and transport_lookup_tmr_lun(). Link: https://lore.kernel.org/r/1591559913-8388-3-git-send-email-sudhakar.panneerselvam@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-10scsi: target: Factor out a new helper, target_cmd_init_cdb()Sudhakar Panneerselvam1-0/+1
target_setup_cmd_from_cdb() is called after a successful call to transport_lookup_cmd_lun(). The new helper factors out the code that can be called before the call to transport_lookup_cmd_lun(). This helper will be used in an upcoming commit to address NULL pointer dereference. Link: https://lore.kernel.org/r/1591559913-8388-2-git-send-email-sudhakar.panneerselvam@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-08scsi: target: tcmu: Make pgr_support and alua_support attributes writableBodo Stroesser1-0/+1
Currently in tcmu reservation commands are handled by core's pr implementation (default) or completely rejected (emulate_pr set to 0). We additionally want to be able to do full reservation handling in userspace. Therefore we need a way to set TRANSPORT_FLAG_PASSTHROUGH_PGR. The inverted flag is displayed by attribute pgr_support. Since we moved the flag from transport/backend to se_device in the previous commit, we now can make it changeable per device by allowing to write the attribute. The new field transport_flags_changeable in transport/backend is used to reject writing if not allowed for a backend. Regarding ALUA we also want to be able to passthrough commands to userspace in tcmu. Therefore we need TRANSPORT_FLAG_PASSTHROUGH_ALUA to be changeable, because by setting it we can switch off all ALUA checks in core. So we also set TRANSPORT_FLAG_PASSTHROUGH_ALUA in tcmu's transport_flags_changeable. Of course, ALUA and reservation handling in userspace will work only, if session/nexus information is sent to userspace along with every command. This will be object of a patch series announced by Mike Christie. Link: https://lore.kernel.org/r/20200427150823.15350-5-bstroesser@ts.fujitsu.com Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-08scsi: target: Make transport_flags per deviceBodo Stroesser2-1/+2
pgr_support and alua_support device attributes show the inverted value of the transport_flags: * TRANSPORT_FLAG_PASSTHROUGH_PGR * TRANSPORT_FLAG_PASSTHROUGH_ALUA These attributes are per device, while the flags are per backend. Rename the transport_flags in backend/transport to transport_flags_default and use this value to initialize the new transport_flags field in the se_device structure. Now data and attribute both are per se_device. Link: https://lore.kernel.org/r/20200427150823.15350-4-bstroesser@ts.fujitsu.com Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-08scsi: target: tcmu: Add attributes enforce_pr_isids and force_pr_aptplBodo Stroesser1-0/+1
tcmu has not set TRANSPORT_FLAG_PASSTHROUGH_PGR. Therefore the in-core pr emulation is active by default, but there are some attributes for configuration missing. Add them. Link: https://lore.kernel.org/r/20200427150823.15350-3-bstroesser@ts.fujitsu.com Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-25scsi: target: iscsi: Remove the iscsi_data_count structureMaurizio Lombardi1-10/+0
This patch removes the iscsi_data_count structure and the iscsit_do_rx_data() function because they are used only by rx_data() Link: https://lore.kernel.org/r/20200424113913.17237-1-mlombard@redhat.com Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-27scsi: target: fix hang when multiple threads try to destroy the same iscsi ↵Maurizio Lombardi1-1/+1
session A number of hangs have been reported against the target driver; they are due to the fact that multiple threads may try to destroy the iscsi session at the same time. This may be reproduced for example when a "targetcli iscsi/iqn.../tpg1 disable" command is executed while a logout operation is underway. When this happens, two or more threads may end up sleeping and waiting for iscsit_close_connection() to execute "complete(session_wait_comp)". Only one of the threads will wake up and proceed to destroy the session structure, the remaining threads will hang forever. Note that if the blocked threads are somehow forced to wake up with complete_all(), they will try to free the same iscsi session structure destroyed by the first thread, causing double frees, memory corruptions etc... With this patch, the threads that want to destroy the iscsi session will increase the session refcount and will set the "session_close" flag to 1; then they wait for the driver to close the remaining active connections. When the last connection is closed, iscsit_close_connection() will wake up all the threads and will wait for the session's refcount to reach zero; when this happens, iscsit_close_connection() will destroy the session structure because no one is referencing it anymore. INFO: task targetcli:5971 blocked for more than 120 seconds. Tainted: P OE 4.15.0-72-generic #81~16.04.1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. targetcli D 0 5971 1 0x00000080 Call Trace: __schedule+0x3d6/0x8b0 ? vprintk_func+0x44/0xe0 schedule+0x36/0x80 schedule_timeout+0x1db/0x370 ? __dynamic_pr_debug+0x8a/0xb0 wait_for_completion+0xb4/0x140 ? wake_up_q+0x70/0x70 iscsit_free_session+0x13d/0x1a0 [iscsi_target_mod] iscsit_release_sessions_for_tpg+0x16b/0x1e0 [iscsi_target_mod] iscsit_tpg_disable_portal_group+0xca/0x1c0 [iscsi_target_mod] lio_target_tpg_enable_store+0x66/0xe0 [iscsi_target_mod] configfs_write_file+0xb9/0x120 __vfs_write+0x1b/0x40 vfs_write+0xb8/0x1b0 SyS_write+0x5c/0xe0 do_syscall_64+0x73/0x130 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Link: https://lore.kernel.org/r/20200313170656.9716-3-mlombard@redhat.com Reported-by: Matt Coleman <mcoleman@datto.com> Tested-by: Matt Coleman <mcoleman@datto.com> Tested-by: Rahul Kundu <rahul.kundu@chelsio.com> Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-17scsi: treewide: Consolidate {get,put}_unaligned_[bl]e24() definitionsBart Van Assche1-6/+0
Move the get_unaligned_be24(), get_unaligned_le24() and put_unaligned_le24() definitions from various drivers into include/linux/unaligned/generic.h. Add a put_unaligned_be24() implementation. Link: https://lore.kernel.org/r/20200313203102.16613-4-bvanassche@acm.org Cc: Keith Busch <kbusch@kernel.org> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Jens Axboe <axboe@fb.com> Cc: Harvey Harrison <harvey.harrison@gmail.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> # For drivers/usb Reviewed-by: Felipe Balbi <balbi@kernel.org> # For drivers/usb/gadget Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-22scsi: target: use an enum to track emulate_ua_intlck_ctrlDavid Disseldorp1-3/+8
The emulate_ua_intlck_ctrl device attribute accepts values of 0, 1 or 2 via ConfigFS, which map to unit attention interlocks control codes in the MODE SENSE control Mode Page. Use an enum to track these values so that it's clear that, unlike the remaining emulate_X attributes, emulate_ua_intlck_ctrl isn't boolean. Link: https://marc.info/?l=target-devel&m=158227825428798 Suggested-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-22scsi: target: convert boolean se_dev_attrib types to boolDavid Disseldorp1-16/+16
This should harden us against configfs API regressions similar to the one fixed by the previous commit. Link: https://marc.info/?l=target-devel&m=158211731505174 Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-22scsi: target: fix unmap_zeroes_data boolean initialisationDavid Disseldorp1-1/+1
The LIO unmap_zeroes_data device attribute is mapped to the LBPRZ flag in the READ CAPACITY(16) and Thin Provisioning VPD INQUIRY responses. The unmap_zeroes_data attribute is exposed via configfs, where any write value is correctly validated via strtobool(). However, when initialised via target_configure_unmap_from_queue() it takes the value of the device's max_write_zeroes_sectors queue limit, which is non-boolean. A non-boolean value can be read from configfs, but attempting to write the same value back results in -EINVAL, causing problems for configuration utilities such as targetcli. Link: https://marc.info/?l=target-devel&m=158213354011309 Fixes: 2237498f0b5c ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-10-04scsi: target: Remove tpg_list and se_portal_group.se_tpg_nodeBart Van Assche1-1/+0
Maintaining tpg_list without ever iterating over it is not useful. Hence remove tpg_list. This patch does not change the behavior of the SCSI target code. Cc: Mike Christie <mchristie@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Link: https://lore.kernel.org/r/20190930232224.58980-1-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-13scsi: target/iscsi: Handle too large immediate data buffers correctlyBart Van Assche1-0/+1
Since target_alloc_sgl() and iscsit_allocate_iovecs() allocate buffer space for se_cmd.data_length bytes and since that number can be smaller than the iSCSI Expected Data Transfer Length (EDTL), ensure that the iSCSI target driver does not attempt to receive more bytes than what fits in the receive buffer. Always receive the full immediate data buffer such that the iSCSI target driver does not attempt to parse immediate data as an iSCSI PDU. Note: the current code base only calls iscsit_get_dataout() if the size of the immediate data buffer does not exceed the buffer size derived from the SCSI CDB. See also target_cmd_size_check(). Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-13scsi: target/core: Rework the SPC-2 reservation handling codeBart Van Assche2-2/+3
Instead of tracking the initiator that established an SPC-2 reservation, track the session through which the SPC-2 reservation has been established. This patch does not change any functionality. Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-05scsi: target/iscsi: Rename a function and a function pointerBart Van Assche1-1/+1
Having both a function and a function pointer member with the same name (iscsit_release_cmd) is confusing. Hence rename the function pointer member. Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-05scsi: target/iscsi: Fix spelling of "unsolicited"Bart Van Assche1-1/+1
Change "unsoliticed" into "unsolicited". Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-05scsi: target/core: Add target_send_busy()Bart Van Assche1-0/+1
Introduce a function that sends the SCSI status "BUSY" back to the initiator. The next patch will add a call to this function in the srpt target driver. Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-05scsi: target/core: Remove several state tests from the TMF codeBart Van Assche1-1/+0
Whether or not a session is being torn down does not affect whether or not SCSI commands are in the task set. Hence remove the "tearing down" checks from the TMF code. The TRANSPORT_ISTATE_PROCESSING check is left out because it is now safe to wait for a command that is in that state. The CMD_T_PRE_EXECUTE is left out because abort processing is postponed until after commands have left the pre-execute state since the patch that makes TMF processing synchronous. See also commit 1c21a48055a6 ("target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK"). Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-05scsi: target/core: Remove the write_pending_status() callback functionBart Van Assche1-1/+0
Due to the patch that makes TMF handling synchronous the write_pending_status() callback function is no longer called. Hence remove it. Acked-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Andy Grover <agrover@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Saurav Kashyap <saurav.kashyap@qlogic.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Juergen Gross <jgross@suse.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-08scsi: target: consistently null-terminate t10_wwn stringsDavid Disseldorp1-3/+11
In preparation for supporting user provided vendor strings, add an extra byte to the vendor, model and revision arrays in struct t10_wwn. This ensures that the full INQUIRY data can be carried in the arrays along with a null-terminator. Change a number of array readers and writers so that they account for explicit null-termination: - The pscsi_set_inquiry_info() and emulate_model_alias_store() codepaths don't currently explicitly null-terminate; fix this. - Existing t10_wwn field dumps use for-loops which step over null-terminators for right-padding. + Use printf with width specifiers instead. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-08scsi: target/core: Make ABORT and LUN RESET handling synchronousBart Van Assche1-0/+1
Instead of invoking target driver callback functions from the context that handles an abort or LUN RESET task management function, only set the abort flag from that context and perform the actual abort handling from the context of the regular command processing flow. This approach has the advantage that the task management code becomes much easier to read and to verify since the number of potential race conditions against the command processing flow is strongly reduced. This patch has been tested by running the following two shell commands concurrently for about ten minutes for both the iSCSI and the SRP target drivers ($dev is an initiator device node connected with storage provided by the target driver under test): * fio with data verification enabled on a filesystem mounted on top of $dev. * while true; do sg_reset -d $dev; echo -n .; sleep .1; done Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Disseldorp <ddiss@suse.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-08scsi: target/core: Fix TAS handling for aborted commandsBart Van Assche2-2/+0
The TASK ABORTED STATUS (TAS) bit is defined as follows in SAM: "TASK_ABORTED: this status shall be returned if a command is aborted by a command or task management function on another I_T nexus and the control mode page TAS bit is set to one". TAS handling is spread over the target core and the iSCSI target driver. If a LUN RESET is received, the target core will send the TASK_ABORTED response for all commands for which such a response has to be sent. If an ABORT TASK is received, only the iSCSI target driver will send the TASK_ABORTED response for the commands for which that response has to be sent. That is a bug since all target drivers have to honor the TAS bit. Fix this by moving the code that handles TAS from the iSCSI target driver into the target core. Additionally, if a command has been aborted, instead of sending the TASK_ABORTED status from the context that processes the SCSI command send it from the context of the ABORT TMF. The core_tmr_abort_task() change in this patch causes the CMD_T_TAS flag to be set if a TASK_ABORTED status has to be sent back to the initiator that submitted the command. If that flag has been set transport_cmd_finish_abort() will send the TASK_ABORTED response. Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Disseldorp <ddiss@suse.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-08scsi: target/core: Simplify the code for aborting SCSI commandsBart Van Assche1-0/+7
Instead of allowing the code that aborts a SCSI command to finish before all iSCSI data frames have been received, make that code wait until all iSCSI data frames have been received. Introduce a new member variable in the target driver template to communicate that information from the iSCSI target driver to the target core. This change allows to leave out the check whether or not it is already safe to send the TASK_ABORTED reply from transport_send_task_abort(). Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Disseldorp <ddiss@suse.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-08scsi: target/core: Make it possible to wait from more than one context for ↵Bart Van Assche1-1/+2
command completion This patch does not change any functionality but makes the patch that makes TMF handling synchronous easier to read. Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Disseldorp <ddiss@suse.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-08scsi: target/core: Use system workqueues for TMFBart Van Assche1-1/+0
A quote from SAM-5: "The order in which task management requests are processed is not specified by the SCSI architecture model. The SCSI architecture model does not require in-order delivery of such task management requests or processing by the task manager in the order received. To guarantee the processing order of task management requests referencing sent to a specific logical unit, an application client should not have more than one such task management request pending to that logical unit." This means that it is safe to use the system workqueues instead of tmr_wq for processing TMFs. An intended side effect of this patch is that it enables concurrent processing of TMFs. Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: David Disseldorp <ddiss@suse.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-08scsi: target/core: Make sure that target_wait_for_sess_cmds() waits long enoughBart Van Assche2-1/+2
A session must only be released after all code that accesses the session structure has finished. Make sure that this is the case by introducing a new command counter per session that is only decremented after the .release_cmd() callback has finished. This patch fixes the following crash: BUG: KASAN: use-after-free in do_raw_spin_lock+0x1c/0x130 Read of size 4 at addr ffff8801534b16e4 by task rmdir/14805 CPU: 16 PID: 14805 Comm: rmdir Not tainted 4.18.0-rc2-dbg+ #5 Call Trace: dump_stack+0xa4/0xf5 print_address_description+0x6f/0x270 kasan_report+0x241/0x360 __asan_load4+0x78/0x80 do_raw_spin_lock+0x1c/0x130 _raw_spin_lock_irqsave+0x52/0x60 srpt_set_ch_state+0x27/0x70 [ib_srpt] srpt_disconnect_ch+0x1b/0xc0 [ib_srpt] srpt_close_session+0xa8/0x260 [ib_srpt] target_shutdown_sessions+0x170/0x180 [target_core_mod] core_tpg_del_initiator_node_acl+0xf3/0x200 [target_core_mod] target_fabric_nacl_base_release+0x25/0x30 [target_core_mod] config_item_release+0x9c/0x110 [configfs] config_item_put+0x26/0x30 [configfs] configfs_rmdir+0x3b8/0x510 [configfs] vfs_rmdir+0xb3/0x1e0 do_rmdir+0x262/0x2c0 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Disseldorp <ddiss@suse.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-08scsi: target/core: Simplify transport_clear_lun_ref()Bart Van Assche1-1/+0
Since transport_clear_lun_ref() already waits until the percpu-refcount .release() method is called, it is not necessary to wait first until percpu_ref_kill_and_confirm() has finished transitioning the refcount into atomic mode. Remove the code that waits for percpu_ref_kill_and_confirm() to complete and also the completion object that is used by that code. This patch does not change the behavior of the SCSI target code. Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Disseldorp <ddiss@suse.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-29scsi: target: replace fabric_ops.name with fabric_aliasDavid Disseldorp1-3/+9
iscsi_target_mod is the only LIO fabric where fabric_ops.name differs from the fabric_ops.fabric_name string. fabric_ops.name is used when matching target/$fabric ConfigFS create paths, so rename it .fabric_alias and fallback to target/$fabric vs .fabric_name comparison if .fabric_alias isn't initialised. iscsi_target_mod is the only fabric module to set .fabric_alias . All other fabric modules rely on .fabric_name matching and can drop the duplicate string. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-29scsi: target: drop unnecessary get_fabric_name() accessor from fabric_opsDavid Disseldorp1-1/+5
All fabrics return a const string. In all cases *except* iSCSI the get_fabric_name() string matches fabric_ops.name. Both fabric_ops.get_fabric_name() and fabric_ops.name are user-facing, with the former being used for PR/ALUA state and the latter for ConfigFS (config/target/$name), so we unfortunately need to keep both strings around for now. Replace the useless .get_fabric_name() accessor function with a const string fabric_name member variable. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-29scsi: target: drop unused pi_prot_format attribute storageDavid Disseldorp1-1/+0
On write, the pi_prot_format configfs attribute invokes the device format_prot() callback if present. Read dumps the contents of se_dev_attrib.pi_prot_format which is always zero. Make the configfs attribute write-only, and drop the always zero se_dev_attrib.pi_prot_format storage. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-22scsi: target: add emulate_pr backstore attr to toggle PR supportDavid Disseldorp1-0/+3
The new emulate_pr backstore attribute allows for Persistent Reservation and SCSI2 RESERVE/RELEASE support to be completely disabled. This can be useful for scenarios such as: - Ensuring ATS (Compare & Write) usage on recent VMware ESXi initiators. - Allowing clustered (e.g. tcm-user) backends to block such requests, avoiding the multi-node reservation state propagation. When explicitly disabled, PR and RESERVE/RELEASE requests receive Invalid Command Operation Code response sense data. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>