summaryrefslogtreecommitdiff
path: root/include/trace/events/v4l2.h
AgeCommit message (Collapse)AuthorFilesLines
2020-01-03media: v4l2: abstract timeval handling in v4l2_bufferArnd Bergmann1-1/+1
As a preparation for adding 64-bit time_t support in the uapi, change the drivers to no longer care about the format of the timestamp field in struct v4l2_buffer. The v4l2_timeval_to_ns() function is no longer needed in the kernel after this, but there is userspace code relying on it to be part of the uapi header. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil-cisco@xs4all.nl: replace spaces by tabs] Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-15[media] v4l: Add metadata buffer type and formatLaurent Pinchart1-0/+1
The metadata buffer type is used to transfer metadata between userspace and kernelspace through a V4L2 buffers queue. It comes with a new metadata capture capability and format description. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: removed left-over 'experimental' note] [hans.verkuil@cisco.com: add newline after _v4l2-meta-format label] Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2015-12-18[media] media: videobuf2: Move timestamp to vb2_bufferJunghak Sung1-2/+2
Move timestamp from struct vb2_v4l2_buffer to struct vb2_buffer for common use, and change its type to u64 in order to handling y2038 problem. This patch also includes all device drivers' changes related to this restructuring. Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] v4l2: add support for SDR transmitterAntti Palosaari1-0/+1
New IOCTL ops: vidioc_enum_fmt_sdr_out vidioc_g_fmt_sdr_out vidioc_s_fmt_sdr_out vidioc_try_fmt_sdr_out New vb2 buffertype: V4L2_BUF_TYPE_SDR_OUTPUT New v4l2 capability: V4L2_CAP_SDR_OUTPUT Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] media: videobuf2: Prepare to divide videobuf2Junghak Sung1-22/+6
Prepare to divide videobuf2 - Separate vb2 trace events from v4l2 trace event. - Make wrapper functions that will move to v4l2-side. - Make vb2_core_* functions that will remain in core-side. - Add a callback function table for buffer operation which makes vb2-core to be able to invoke a v4l2-side functions. - Rename internal functions as vb2_*. Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] media: videobuf2: Replace v4l2-specific data with vb2 dataJunghak Sung1-1/+4
Simple changes that replace v4l2-specific data with vb2 data in videobuf2-core. enum v4l2_buf_type --> int enum v4l2_memory --> enum vb2_memory VIDEO_MAX_FRAME --> VB2_MAX_FRAME VIDEO_MAX_PLANES --> VB2_MAX_PLANES struct v4l2_fh *owner --> void *owner V4L2_TYPE_IS_MULTIPLANAR() --> is_multiplanar V4L2_TYPE_IS_OUTPUT() --> is_output Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-01[media] media: videobuf2: Restructure vb2_bufferJunghak Sung1-17/+18
Remove v4l2 stuff - v4l2_buf, v4l2_plane - from struct vb2_buffer. Add new member variables - bytesused, length, offset, userptr, fd, data_offset - to struct vb2_plane in order to cover all information of v4l2_plane. struct vb2_plane { <snip> unsigned int bytesused; unsigned int length; union { unsigned int offset; unsigned long userptr; int fd; } m; unsigned int data_offset; } Replace v4l2_buf with new member variables - index, type, memory - which are common fields for buffer management. struct vb2_buffer { <snip> unsigned int index; unsigned int type; unsigned int memory; unsigned int num_planes; struct vb2_plane planes[VIDEO_MAX_PLANES]; <snip> }; v4l2 specific fields - flags, field, timestamp, timecode, sequence - are moved to vb2_v4l2_buffer in videobuf2-v4l2.c struct vb2_v4l2_buffer { struct vb2_buffer vb2_buf; __u32 flags; __u32 field; struct timeval timestamp; struct v4l2_timecode timecode; __u32 sequence; }; Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] videobuf2: add trace eventsPhilipp Zabel1-0/+97
Add videobuf2 specific vb2_qbuf and vb2_dqbuf trace events that mirror the v4l2_qbuf and v4l2_dqbuf trace events, only they include additional information about queue fill state and are emitted right before the buffer is enqueued in the driver or userspace is woken up. This allows to make sense of the timeline of trace events in combination with others that might be triggered by __enqueue_in_driver. Also two new trace events vb2_buf_queue and vb2_buf_done are added, allowing to trace the handover between videobuf2 framework and driver. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] v4l2-dev: use event class to deduplicate v4l2 trace eventsPhilipp Zabel1-82/+78
Trace events with exactly the same parameters and trace output, such as v4l2_qbuf and v4l2_dqbuf, are supposed to use the DECLARE_EVENT_CLASS and DEFINE_EVENT macros instead of duplicated TRACE_EVENT macro calls. Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12[media] videodev2: Add V4L2_BUF_FLAG_LASTPeter Seiderer1-1/+2
This v4l2_buffer flag can be used by drivers to mark a capture buffer as the last generated buffer, for example after a V4L2_DEC_CMD_STOP command was issued. Signed-off-by: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-08v4l: Export enums used by tracepoints to user spaceSteven Rostedt (Red Hat)1-25/+50
Enums used by tracepoints for __print_symbolic() are shown in the tracepoint format files with just their names and not their values. This makes it difficult for user space tools to know how to convert the binary data into their string representations. By adding the use of TRACE_DEFINE_ENUM(), the enum names will be mapped to their values and shown in the tracing file system to let tools convert the data as necessary. Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-05[media] v4l: add stream format for SDR receiverAntti Palosaari1-0/+1
Add new V4L2 stream format definition, V4L2_BUF_TYPE_SDR_CAPTURE, for SDR receiver. Signed-off-by: Antti Palosaari <crope@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-10[media] v4l2-dev: Add tracepoints for QBUF and DQBUFWade Farnsworth1-0/+157
Add tracepoints to the QBUF and DQBUF ioctls to enable rudimentary performance measurements using standard kernel tracers. [m.chehab@samsung.com: CodingStyle fixes (whitespacing)] Signed-off-by: Wade Farnsworth <wade_farnsworth@mentor.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>