summaryrefslogtreecommitdiff
path: root/include/video
AgeCommit message (Collapse)AuthorFilesLines
2016-11-16Merge branch 'drm/next/du' of git://linuxtv.org/pinchartl/media into drm-nextDave Airlie1-7/+8
rcar-du -next branch. * 'drm/next/du' of git://linuxtv.org/pinchartl/media: drm: rcar-du: Fix LVDS start sequence on Gen3 drm: rcar-du: Fix H/V sync signal polarity configuration drm: rcar-du: Fix display timing controller parameter drm: rcar-du: Fix dot clock routing configuration drm: rcar-du: Add R8A7796 support drm: rcar-du: Add R8A7792 support drm: rcar-du: Simplify and fix probe error handling drm: rcar-du: Fix crash in encoder failure error path drm: rcar-du: Remove memory allocation error message drm: rcar-du: Remove test for impossible error condition drm: rcar-du: Bring HDMI encoder comments in line with the driver drm: rcar-du: Constify node argument to rcar_du_lvds_connector_init() video: of: Constify node argument to display timing functions
2016-11-14video: of: Constify node argument to display timing functionsLaurent Pinchart1-7/+8
The node pointer passed to the display timing functions is never modified, make it const. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-11-11Merge tag 'imx-drm-next-2016-11-10' of ↵Dave Airlie1-2/+1
git://git.pengutronix.de/git/pza/linux into drm-next imx-drm plane update cleanup, YUV formats - request modeset if plane offsets changed, only the plane base address can be changed without disabling the plane IDMAC channel. - cleanup of plane atomic_update - remove unused ipu_cpmem_set_yuv_planar function - support YUV 4:4:4, 4:2:2, NV12 and NV16 plane formats - not only mask interrupts during irq init, also clear them - remove a legacy check from imx-ldb - add support to set the CSI downsizing bits - silence an obnoxious warning during modeset * tag 'imx-drm-next-2016-11-10' of git://git.pengutronix.de/git/pza/linux: gpu: ipu-di: silence videomode logspam gpu: ipu-v3: add ipu_csi_set_downsize drm/imx: imx-ldb: remove unnecessary double disable check gpu: ipu-v3: initially clear all interrupts drm/imx: ipuv3-plane: add support for YUV 4:2:2 and 4:4:4, NV12, and NV16 formats gpu: ipu-v3: add YUV 4:4:4 support gpu: ipu-cpmem: remove unused ipu_cpmem_set_yuv_planar function drm/imx: ipuv3-plane: let drm_plane_state_to_ubo/vbo handle chroma subsampling other than 4:2:0 drm/imx: ipuv3-plane: merge ipu_plane_atomic_set_base into atomic_update drm/imx: ipuv3-plane: request modeset if plane offsets changed
2016-11-07gpu: ipu-v3: add ipu_csi_set_downsizePhilipp Zabel1-0/+1
Support downsizing to 1/2 width and/or height in the CSI. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-11-02video: display_timing: Add flags to select the edge when the sync is drivenPeter Ujfalusi1-0/+4
The sync can be - and for some panels it must be - driven on different edge then the data. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: devicetree@vger.kernel.org Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-10-20gpu: ipu-cpmem: remove unused ipu_cpmem_set_yuv_planar functionPhilipp Zabel1-2/+0
ipu_cpmem_set_yuv_planar_full is only used directly, remove the wrapper. Suggested-by: Liu Ying <gnuiyl@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Liu Ying <gnuiyl@gmail.com>
2016-10-12Merge tag 'fbdev-4.9' of ↵Linus Torvalds1-358/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev updates from Tomi Valkeinen: "Main changes: - amba-cldc: DT backlight support, Nomadik support, Versatile improvements, fixes - efifb: fix fbcon RGB565 palette - exynos: remove unused DSI driver" * tag 'fbdev-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (42 commits) video: smscufx: remove unused variable matroxfb: fix size of memcpy fbdev: ssd1307fb: fix a possible NULL dereference fbdev: ssd1307fb: constify the device_info pointer simplefb: Disable and release clocks and regulators in destroy callback video: fbdev: constify fb_fix_screeninfo and fb_var_screeninfo structures matroxfb: constify local structures video: fbdev: i810: add in missing white space in error message text video: fbdev: add missing \n at end of printk error message ARM: exynos_defconfig: Remove old non-working MIPI driver video: fbdev: exynos: Remove old non-working MIPI driver omapfb: fix return value check in dsi_bind() MAINTAINERS: update fbdev entries video: fbdev: offb: Call pci_enable_device() before using the PCI VGA device fbdev: vfb: simplify memory management fbdev: vfb: add option for video mode fbdev: vfb: add description to module parameters video: fbdev: intelfb: remove impossible condition fb: adv7393: off by one in probe function video: fbdev: pxafb: add missing of_node_put() in of_get_pxafb_mode_info() ...
2016-09-27video: fbdev: exynos: Remove old non-working MIPI driverKrzysztof Kozlowski1-358/+0
The old non-DRM Exynos MIPI driver does not support DeviceTree and requires board files. Our platforms do not provide such so the driver is not usable since a long time ago. All features provided by the driver (and associated s6e8ax0 panel driver) are already supported by newer DRM version so the old code can be removed. Cc: Inki Dae <inki.dae@samsung.com> Cc: Donghwa Lee <dh09.lee@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-09-19gpu: ipu-v3: Add queued image conversion supportSteve Longerbeam1-0/+207
This patch implements image conversion support using the IC tasks, with tiling to support scaling to and from images up to 4096x4096. Image rotation is also supported. Image conversion requests are added to a run queue under the IC tasks. The internal API is subsystem agnostic (no V4L2 dependency except for the use of V4L2 fourcc pixel formats). Callers prepare for image conversion by calling ipu_image_convert_prepare(), which initializes the parameters of the conversion. The caller passes in the ipu and IC task to use for the conversion, the input and output image formats, a rotation mode, and a completion callback and completion context pointer: struct ipu_image_converter_ctx * ipu_image_convert_prepare(struct ipu_soc *ipu, enum ipu_ic_task ic_task, struct ipu_image *in, struct ipu_image *out, enum ipu_rotate_mode rot_mode, ipu_image_converter_cb_t complete, void *complete_context); A new conversion context is created that is added to an IC task context queue. The caller is given the new conversion context, which can then be passed to the further APIs: int ipu_image_convert_queue(struct ipu_image_converter_run *run); This queues the given image conversion request run to a run queue, and starts the conversion immediately if the run queue is empty. Only the physaddr's of the input and output image buffers are needed, since the conversion context was created previously with ipu_image_convert_prepare(). When the conversion completes, the run pointer is returned to the completion callback. void ipu_image_convert_abort(struct ipu_image_converter_ctx *ctx); This will abort any active or pending conversions for this context. Any currently active or pending runs belonging to this context are returned via the completion callback with an error status. void ipu_image_convert_unprepare(struct ipu_image_converter_ctx *ctx); Unprepares the conversion context. Any active or pending runs will be aborted by calling ipu_image_convert_abort(). Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-09-19gpu: ipu-v3: Add ipu_rot_mode_is_irt()Steve Longerbeam1-7/+15
Add a macro that returns boolean true if the given ipu_rotate_mode requires the use of the Image Rotator. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-29gpu: ipu-v3: Add FSU channel linking supportSteve Longerbeam1-0/+13
Adds functions to link and unlink source channels to sink channels in the FSU: int ipu_fsu_link(struct ipu_soc *ipu, int src_ch, int sink_ch); int ipu_fsu_unlink(struct ipu_soc *ipu, int src_ch, int sink_ch); The channels numbers are usually IDMAC channels, but they can also be channels that do not transfer data to or from memory. The following convenience functions can be used in place of ipu_fsu_link/unlink() when both source and sink channels are IDMAC channels: int ipu_idmac_link(struct ipuv3_channel *src, struct ipuv3_channel *sink); int ipu_idmac_unlink(struct ipuv3_channel *src, struct ipuv3_channel *sink); So far the following links are supported: IPUV3_CHANNEL_IC_PRP_ENC_MEM -> IPUV3_CHANNEL_MEM_ROT_ENC PUV3_CHANNEL_IC_PRP_VF_MEM -> IPUV3_CHANNEL_MEM_ROT_VF IPUV3_CHANNEL_IC_PP_MEM -> IPUV3_CHANNEL_MEM_ROT_PP IPUV3_CHANNEL_CSI_DIRECT -> IPUV3_CHANNEL_CSI_VDI_PREV More links can be added to the fsu_link_info[] array. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-29gpu: ipu-v3: Add Video Deinterlacer unitSteve Longerbeam1-0/+23
Adds the Video Deinterlacer (VDIC) unit. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-08gpu: ipu-v3: Add missing IDMAC channel namesPhilipp Zabel1-0/+12
This patch adds the remaining missing IDMAC channel names: VDIC channels for combining, the separate alpha channels for the MEM->IC and MEM->DC ASYNC channels, and the DC read, command, and output mask channels. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-08gpu: ipu-v3: Add VDI input IDMAC channelsSteve Longerbeam1-0/+3
Adds the VDIC field input IDMAC channels. These channels transfer fields F(n-1), F(n), and F(N+1) from memory to the VDIC (channels 8, 9, 10 respectively). Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-08gpu: ipu-v3: Add ipu_get_num()Steve Longerbeam1-0/+1
Adds of-alias id to ipu_soc and retrieve with ipu_get_num(). Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-08gpu: ipu-cpmem: Add ipu_cpmem_get_burstsize()Steve Longerbeam1-0/+1
Adds ipu_cpmem_get_burstsize(). Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-08gpu: ipu-cpmem: Add ipu_cpmem_set_uv_offset()Steve Longerbeam1-0/+1
Adds ipu_cpmem_set_uv_offset(), to set planar U/V offsets. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12gpu: ipu-v3: ipu-dmfc: Use static DMFC FIFO allocation mechanismLiu Ying1-3/+0
For all video modes we support currently, we always get 2 slots for a plane by using the current existing dynamic DMFC FIFO allocation mechanism. So, let's change to use the static one to simplify the code. This also makes it easier to implement the atomic mode setting as we don't need to handle allocation failure cases then. Signed-off-by: Liu Ying <gnuiyl@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-06-07Merge omapdss header refactoringTomi Valkeinen2-208/+9
Merge omapdss public header refactoring, which separates the public header into omapdrm and omapfb parts.
2016-06-06Merge branch '4.8/omapdrm-pll' (omapdrm PLL work)Tomi Valkeinen1-20/+0
Merge omapdrm PLL work, which makes it possible to use the DSS PLLs in a versatile manner, for example, HDMI PLL can be used for LCDs.
2016-06-03drm/omap: Remove the video/omapdss.h and move it's content to local header filePeter Ujfalusi1-888/+0
Move the contents of the video/omapdss.h header file to omapdrm/dss local header file and remove the original global header. The omapfb stach is using video/omapfb_dss.h so this change will complete the separation of the two driver implementation. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03omapfb: Create new header file for omapfb DSS implementationPeter Ujfalusi1-0/+880
Copy the content of video/omapdss.h to a new (video/omapfb_dss.h) header file and convert the omapfb drivers to use this new file. The new header file is needed to complete the separation of omapdrm and omapfb implementation of DSS. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03omapdss: hdmi audio: Make header file independent of video/omapdss.hPeter Ujfalusi1-5/+0
Clean up the header files regarding to hdmi audio so the omap-hdmi-audio.h file will only need to include the platform_data/omapdss.h file. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> CC: Mark Brown <broonie@kernel.org> CC: Jyri Sarha <jsarha@ti.com> CC: Liam Girdwood <liam.r.girdwood@linux.intel.com>
2016-06-03omapdss: omap-panel-data.h: Remove connector_type from atv pdataPeter Ujfalusi1-3/+0
The driver only supports composite connection when booted in legacy mode so the omap_dss_venc_type can be dropped from the pdata. At the same time the video/omapdss.h include can be removed as it is no longer needed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03omapdss: omap-panel-data.h: Remove struct omap_dss_device declarationPeter Ujfalusi1-2/+0
The omap_dss_device is not needed by anything in the header file. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03omapfb: encoder-tfp410: Remove legacy boot supportPeter Ujfalusi1-14/+0
The panel is not used by any legacy board files so the legacy (pdata) boot support can be dropped. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03omapfb: connector-dvi: Remove legacy boot supportPeter Ujfalusi1-12/+0
The panel is not used by any legacy board files so the legacy (pdata) boot support can be dropped. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03omapfb: connector-hdmi: Remove legacy boot supportPeter Ujfalusi1-10/+0
The panel is not used by any legacy board files so the legacy (pdata) boot support can be dropped. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03omapfb: panel-dsi-cm: Remove legacy boot supportPeter Ujfalusi1-27/+0
The panel is not used by any legacy board files so the legacy (pdata) boot support can be dropped. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03omapfb: panel-lgphilips-lb035q02: Remove legacy boot supportPeter Ujfalusi1-18/+0
The panel is not used by any legacy board files so the legacy (pdata) boot support can be dropped. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03omapfb: panel-sharp-ls037v7dw01: Remove legacy boot supportPeter Ujfalusi1-24/+0
The panel is not used by any legacy board files so the legacy (pdata) boot support can be dropped. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03omapfb: panel-tpo-td043mtea1: Remove legacy boot supportPeter Ujfalusi1-16/+0
The panel is not used by any legacy board files so the legacy (pdata) boot support can be dropped. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03omapfb: panel-nec-nl8048hl11: Remove legacy boot supportPeter Ujfalusi1-18/+0
The panel is not used by any legacy board files so the legacy (pdata) boot support can be dropped. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03omapfb: panel-tpo-td028ttec1: Remove legacy boot supportPeter Ujfalusi1-13/+0
The panel is not used by any legacy board files so the legacy (pdata) boot support can be dropped. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03video/platform_data: omapdss: Create new header file for platform dataPeter Ujfalusi1-27/+1
Create a new header file for platform data used by omapdss. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03ARM/video: omap2: Move omap_display_init declaration to mach-omap2/display.hPeter Ujfalusi1-3/+0
The omap_display_init() is implemented in the mach-omap2/display.c so the declaration should have been there as well. Change the board files to include display.h to avoid build breakage at the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2016-05-25Merge tag 'imx-drm-fixes-2016-05-24' of ↵Dave Airlie1-0/+2
git://git.pengutronix.de/git/pza/linux into drm-next imx-drm probing fix Commit 950b410dd1ab ("gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloading") broke probing of the imx-drm driver in the non-modular case because the unset dev->of_node during probing of imx-ipuv3-crtc would cause the component matching to fail. This patch patch instead matches against an of_node pointer stored in platform data, allowing dev->of_node to be left unset for the platform probed imx-ipuv3-crtc devices. * tag 'imx-drm-fixes-2016-05-24' of git://git.pengutronix.de/git/pza/linux: drm/imx: Match imx-ipuv3-crtc components using device node in platform data
2016-05-23Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2-3/+11
Pull drm updates from Dave Airlie: "Here's the main drm pull request for 4.7, it's been a busy one, and I've been a bit more distracted in real life this merge window. Lots more ARM drivers, not sure if it'll ever end. I think I've at least one more coming the next merge window. But changes are all over the place, support for AMD Polaris GPUs is in here, some missing GM108 support for nouveau (found in some Lenovos), a bunch of MST and skylake fixes. I've also noticed a few fixes from Arnd in my inbox, that I'll try and get in asap, but I didn't think they should hold this up. New drivers: - Hisilicon kirin display driver - Mediatek MT8173 display driver - ARC PGU - bitstreamer on Synopsys ARC SDP boards - Allwinner A13 initial RGB output driver - Analogix driver for DisplayPort IP found in exynos and rockchip DRM Core: - UAPI headers fixes and C++ safety - DRM connector reference counting - DisplayID mode parsing for Dell 5K monitors - Removal of struct_mutex from drivers - Connector registration cleanups - MST robustness fixes - MAINTAINERS updates - Lockless GEM object freeing - Generic fbdev deferred IO support panel: - Support for a bunch of new panels i915: - VBT refactoring - PLL computation cleanups - DSI support for BXT - Color manager support - More atomic patches - GEM improvements - GuC fw loading fixes - DP detection fixes - SKL GPU hang fixes - Lots of BXT fixes radeon/amdgpu: - Initial Polaris support - GPUVM/Scheduler/Clock/Power improvements - ASYNC pageflip support - New mesa feature support nouveau: - GM108 support - Power sensor support improvements - GR init + ucode fixes. - Use GPU provided topology information vmwgfx: - Add host messaging support gma500: - Some cleanups and fixes atmel: - Bridge support - Async atomic commit support fsl-dcu: - Timing controller for LCD support - Pixel clock polarity support rcar-du: - Misc fixes exynos: - Pipeline clock support - Exynoss4533 SoC support - HW trigger mode support - export HDMI_PHY clock - DECON5433 fixes - Use generic prime functions - use DMA mapping APIs rockchip: - Lots of little fixes vc4: - Render node support - Gamma ramp support - DPI output support msm: - Mostly cleanups and fixes - Conversion to generic struct fence etnaviv: - Fix for prime buffer handling - Allow hangcheck to be coalesced with other wakeups tegra: - Gamme table size fix" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1050 commits) drm/edid: add displayid detailed 1 timings to the modelist. (v1.1) drm/edid: move displayid validation to it's own function. drm/displayid: Iterate over all DisplayID blocks drm/edid: move displayid tiled block parsing into separate function. drm: Nuke ->vblank_disable_allowed drm/vmwgfx: Report vmwgfx version to vmware.log drm/vmwgfx: Add VMWare host messaging capability drm/vmwgfx: Kill some lockdep warnings drm/nouveau/gr/gf100-: fix race condition in fecs/gpccs ucode drm/nouveau/core: recognise GM108 chipsets drm/nouveau/gr/gm107-: fix touching non-existent ppcs in attrib cb setup drm/nouveau/gr/gk104-: share implementation of ppc exception init drm/nouveau/gr/gk104-: move rop_active_fbps init to nonctx drm/nouveau/bios/pll: check BIT table version before trying to parse it drm/nouveau/bios/pll: prevent oops when limits table can't be parsed drm/nouveau/volt/gk104: round up in gk104_volt_set drm/nouveau/fb/gm200: setup mmu debug buffer registers at init() drm/nouveau/fb/gk20a,gm20b: setup mmu debug buffer registers at init() drm/nouveau/fb/gf100-: allocate mmu debug buffers drm/nouveau/fb: allow chipset-specific actions for oneinit() ...
2016-05-23drm/imx: Match imx-ipuv3-crtc components using device node in platform dataPhilipp Zabel1-0/+2
The component master driver imx-drm-core matches component devices using their of_node. Since commit 950b410dd1ab ("gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloading"), the imx-ipuv3-crtc dev->of_node is not set during probing. Before that, of_node was set and caused an of: modalias to be used instead of the platform: modalias, which broke module autoloading. On the other hand, if dev->of_node is not set yet when the imx-ipuv3-crtc probe function calls component_add, component matching in imx-drm-core fails. While dev->of_node will be set once the next component tries to bring up the component master, imx-drm-core component binding will never succeed if one of the crtc devices is probed last. Add of_node to the component platform data and match against the pdata->of_node instead of dev->of_node in imx-drm-core to work around this problem. Cc: <stable@vger.kernel.org> # 4.4.x Fixes: 950b410dd1ab ("gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloading") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Lothar Waßmann <LW@KARO-electronics.de> Tested-by: Heiko Schocher <hs@denx.de> Tested-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
2016-05-19drm/omap: copy enum omap_dss_clk_sourceTomi Valkeinen1-11/+0
At the moment 'enum omap_dss_clk_source' is in omapdss.h, shared by omapdrm and omapfb. We're about to improve the omapdrm clock code, so we need to make a separate copy of the enum for each driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-05-19drm/omap: remove unused enum omap_overlay_manager_capsTomi Valkeinen1-5/+0
'enum omap_overlay_manager_caps' is not used anywhere, remove it. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-05-18drm/omap: remove unused enum omap_hdmi_flagsTomi Valkeinen1-4/+0
'enum omap_hdmi_flags' is not used anywhere, remove it. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-05-10fbdev: sh_mipi_dsi: remove driverSimon Horman1-59/+0
Remove the sh_mipi_dsi driver as it appears to be unused since c0bb9b302769 ("ARCH: ARM: shmobile: Remove ag5evm board support"). Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-04-30drm/exynos: clean up register definions for fimd and deconInki Dae1-3/+3
This patch removes suffixes from I80 relevant register definitions, which are misleading. This is based on top of below patch set, http://www.spinics.net/lists/dri-devel/msg104057.html Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-22Merge tag 'v4.6-rc3' into drm-nextDave Airlie1-3/+4
Backmerge 4.6-rc3 for i915. Linux 4.6-rc3
2016-04-06Merge tag 'topic/drm-misc-2016-04-01' of ↵Dave Airlie1-0/+8
git://anongit.freedesktop.org/drm-intel into drm-next * tag 'topic/drm-misc-2016-04-01' of git://anongit.freedesktop.org/drm-intel: drm: Add new DCS commands in the enum list drm: Make uapi headers C89 pendantic compliant drm/atomic: export drm_atomic_helper_wait_for_fences() drm: Untangle __KERNEL__ guards drm: Move DRM_MODE_OBJECT_* to uapi headers drm: align #include directives with libdrm in uapi headers drm: Make drm.h uapi header safe for C++ vgacon: dummy implementation for vgacon_text_force drm/sysfs: Nuke TV/DVI property files drm/ttm: Remove TTM_HAS_AGP drm: bridge/dw-hdmi: Remove pre_enable/post_disable dummy funcs Revert "drm: Don't pass negative delta to ktime_sub_ns()" drm/atmel: Fixup drm_connector_/unplug/unregister/_all drm: Rename drm_connector_unplug_all() to drm_connector_unregister_all() drm: bridge: Make (pre/post) enable/disable callbacks optional
2016-03-31gpu: ipu-v3: ipu-dmfc: Rename ipu_dmfc_init_channel to ipu_dmfc_config_wait4eotLiu Ying1-1/+1
The function name 'ipu_dmfc_config_wait4eot' matches the implementation of the function better than 'ipu_dmfc_init_channel', since it only touches the wait4eot bits. Signed-off-by: Liu Ying <gnuiyl@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-03-31gpu: ipu-v3: ipu-dmfc: Make function ipu_dmfc_init_channel() return voidLiu Ying1-1/+1
Since the function ipu_dmfc_init_channel() always returns zero, we may change the return type to void to simplify the code. Signed-off-by: Liu Ying <gnuiyl@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-03-31gpu: ipu-cpmem: modify ipu_cpmem_set_yuv_planar_full for better controlPhilipp Zabel1-2/+3
Let ipu_cpmem_set_yuv_planar_full take a DRM_FORMAT instead of a V4L2_PIXFMT and allow better control over U/V stride, U offset and V offset settings in the CPMEM. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-03-31drm: Add new DCS commands in the enum listDeepak M1-0/+8
Adding new DCS commands which are specified in the DCS 1.3 spec related to CABC. v2: Sorted the Macro`s by value (Andrzej) v3 by Jani: sort all of enum, refer to MIPI DCS 1.3 Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: <dri-devel@lists.freedesktop.org> Suggested-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Deepak M <m.deepak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1459346623-30752-1-git-send-email-jani.nikula@intel.com