Age | Commit message (Collapse) | Author | Files | Lines |
|
commit 99cb0d917ffa1ab628bb67364ca9b162c07699b1 upstream.
Dennis Gilmore reports that the BuildID is missing in the arm64 vmlinux
since commit 994b7ac1697b ("arm64: remove special treatment for the
link order of head.o").
The issue is that the type of .notes section, which contains the BuildID,
changed from NOTES to PROGBITS.
Ard Biesheuvel figured out that whichever object gets linked first gets
to decide the type of a section. The PROGBITS type is the result of the
compiler emitting .note.GNU-stack as PROGBITS rather than NOTE.
While Ard provided a fix for arm64, I want to fix this globally because
the same issue is happening on riscv since commit 2348e6bf4421 ("riscv:
remove special treatment for the link order of head.o"). This problem
will happen in general for other architectures if they start to drop
unneeded entries from scripts/head-object-list.txt.
Discard .note.GNU-stack in include/asm-generic/vmlinux.lds.h.
Link: https://lore.kernel.org/lkml/CAABkxwuQoz1CTbyb57n0ZX65eSYiTonFCU8-LCQc=74D=xE=rA@mail.gmail.com/
Fixes: 994b7ac1697b ("arm64: remove special treatment for the link order of head.o")
Fixes: 2348e6bf4421 ("riscv: remove special treatment for the link order of head.o")
Reported-by: Dennis Gilmore <dennis@ausil.us>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
[Tom: stable backport 5.15.y, 5.10.y, 5.4.y]
Though the above "Fixes:" commits are not in this kernel, the conditions
which lead to a missing Build ID in arm64 vmlinux are similar.
Evidence points to these conditions:
1. ld version > 2.36 (exact binutils commit documented in a494398bde27)
2. first object which gets linked (head.o) has a PROGBITS .note.GNU-stack segment
These conditions can be observed when:
- 5.15.60+ OR 5.10.136+ OR 5.4.210+
- AND ld version > 2.36
- AND arch=arm64
- AND CONFIG_MODVERSIONS=y
There are notable differences in the vmlinux elf files produced
before(bad) and after(good) applying this series.
Good: p_type:PT_NOTE segment exists.
Bad: p_type:PT_NOTE segment is missing.
Good: sh_name_str:.notes section has sh_type:SHT_NOTE
Bad: sh_name_str:.notes section has sh_type:SHT_PROGBITS
`readelf -n` (as of v2.40) searches for Build Id
by processing only the very first note in sh_type:SHT_NOTE sections.
This was previously bisected to the stable backport of 0d362be5b142.
Follow-up experiments were discussed here: https://lore.kernel.org/all/20221221235413.xaisboqmr7dkqwn6@oracle.com/
which strongly hints at condition 2.
Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit db6c4dee4c104f50ed163af71c53bfdb878a8318 ]
Add SolidRun vendor ID to pci_ids.h
The vendor ID is used in 2 different source files, the SNET vDPA driver
and PCI quirks.
Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Message-Id: <20230110165638.123745-2-alvaro.karsz@solid-run.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4a02426787bf024dafdb79b362285ee325de3f5e ]
The xtables packet traverser performs an unconditional local_bh_disable(),
but the nf_tables evaluation loop does not.
Functions that are called from either xtables or nftables must assume
that they can be called in process context.
inet_twsk_deschedule_put() assumes that no softirq interrupt can occur.
If tproxy is used from nf_tables its possible that we'll deadlock
trying to aquire a lock already held in process context.
Add a small helper that takes care of this and use it.
Link: https://lore.kernel.org/netfilter-devel/401bd6ed-314a-a196-1cdc-e13c720cc8f2@balasys.hu/
Fixes: 4ed8eb6570a4 ("netfilter: nf_tables: Add native tproxy support")
Reported-and-tested-by: Major Dávid <major.david@balasys.hu>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 20c36ce2164f1774b487d443ece99b754bc6ad43 ]
The 'size' is used in struct_size(domain, revmap, size) and its input
parameter type is 'size_t'(unsigned int).
Changing the size to 'unsigned int' to make the type consistent.
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210916025203.44841-1-cuibixuan@huawei.com
Stable-dep-of: 8932c32c3053 ("irqdomain: Fix domain registration race")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a359f757965aafd0f58570de95dc6bc06cf12a9c ]
Fix ~36 single-word typos in the IRQ, irqchip and irqdomain code comments.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Stable-dep-of: 6e6f75c9c98d ("irqdomain: Look for existing mapping only once")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a2b9b123ccac913e9f9b80337d687a2fe786a634 ]
Wangxun has verified there is no peer-to-peer between functions for the
below selection of SFxxx, RP1000 and RP2000 NICS. They may be
multi-function devices, but the hardware does not advertise ACS capability.
Add an ACS quirk for these devices so the functions can be in independent
IOMMU groups.
Link: https://lore.kernel.org/r/20230207102419.44326-1-mengyuanlou@net-swift.com
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e16cab9c1596e251761d2bfb5e1467950d616963 ]
The color matching descriptors defined in the UVC Specification
contain 3 fields with discrete numeric values representing particular
settings. Enumerate those values so that later code setting them can
be more readable.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230202114142.300858-2-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8b3517f88ff2983f52698893519227c10aac90b2 ]
Except for isochronous-configured devices, software may set
Max_Read_Request_Size (MRRS) to any value up to 4096. If a device issues a
read request with size greater than the completer's Max_Payload_Size (MPS),
the completer is required to break the response into multiple completions.
Instead of correctly responding with multiple completions to a large read
request, some LS7A Root Ports respond with a Completer Abort. To prevent
this, the MRRS must be limited to an implementation-specific value.
The OS cannot detect that value, so rely on BIOS to configure MRRS before
booting, and quirk the Root Ports so we never set an MRRS larger than that
BIOS value for any downstream device.
N.B. Hot-added devices are not configured by BIOS, and they power up with
MRRS = 512 bytes, so these devices will be limited to 512 bytes. If the
LS7A limit is smaller, those hot-added devices may not work correctly, but
per [1], hotplug is not supported with this chipset revision.
[1] https://lore.kernel.org/r/073638a7-ae68-2847-ac3d-29e5e760d6af@loongson.cn
[bhelgaas: commit log]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216884
Link: https://lore.kernel.org/r/20230201043018.778499-3-chenhuacai@loongson.cn
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b839212988575c701aab4d3d9ca15e44c87e383c ]
The memcpy() in uvc_video_decode_meta() intentionally copies across the
length and flags members and into the trailing buf flexible array.
Split the copy so that the compiler can better reason about (the lack
of) buffer overflows here. Avoid the run-time false positive warning:
memcpy: detected field-spanning write (size 12) of single field "&meta->length" at drivers/media/usb/uvc/uvc_video.c:1355 (size 1)
Additionally fix a typo in the documentation for struct uvc_meta_buf.
Reported-by: ionut_n2001@yahoo.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216810
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6c40624930c58529185a257380442547580ed837 ]
The Data Capture and Compare(DCC) is a debugging tool that uses the bootconfig
for configuring the register values during boot-time. Increase the max nodes
supported by bootconfig to cater to the requirements of the Data Capture and
Compare Driver.
Link: https://lore.kernel.org/all/1674536682-18404-1-git-send-email-quic_schowdhu@quicinc.com/
Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 68ba44639537de6f91fe32783766322d41848127 ]
With this refcnt added in sctp_stream_priorities, we don't need to
traverse all streams to check if the prio is used by other streams
when freeing one stream's prio in sctp_sched_prio_free_sid(). This
can avoid a nested loop (up to 65535 * 65535), which may cause a
stuck as Ying reported:
watchdog: BUG: soft lockup - CPU#23 stuck for 26s! [ksoftirqd/23:136]
Call Trace:
<TASK>
sctp_sched_prio_free_sid+0xab/0x100 [sctp]
sctp_stream_free_ext+0x64/0xa0 [sctp]
sctp_stream_free+0x31/0x50 [sctp]
sctp_association_free+0xa5/0x200 [sctp]
Note that it doesn't need to use refcount_t type for this counter,
as its accessing is always protected under the sock lock.
v1->v2:
- add a check in sctp_sched_prio_set to avoid the possible prio_head
refcnt overflow.
Fixes: 9ed7bfc79542 ("sctp: fix memory leak in sctp_stream_outq_migrate()")
Reported-by: Ying Xu <yinxu@redhat.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/825eb0c905cb864991eba335f4a2b780e543f06b.1677085641.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 4971c268b85e1c7a734a61622fc0813c86e2362e upstream.
Commit 98de59bfe4b2f ("take calculation of final prot in
security_mmap_file() into a helper") moved the code to update prot, to be
the actual protections applied to the kernel, to a new helper called
mmap_prot().
However, while without the helper ima_file_mmap() was getting the updated
prot, with the helper ima_file_mmap() gets the original prot, which
contains the protections requested by the application.
A possible consequence of this change is that, if an application calls
mmap() with only PROT_READ, and the kernel applies PROT_EXEC in addition,
that application would have access to executable memory without having this
event recorded in the IMA measurement list. This situation would occur for
example if the application, before mmap(), calls the personality() system
call with READ_IMPLIES_EXEC as the first argument.
Align ima_file_mmap() parameters with those of the mmap_file LSM hook, so
that IMA can receive both the requested prot and the final prot. Since the
requested protections are stored in a new variable, and the final
protections are stored in the existing variable, this effectively restores
the original behavior of the MMAP_CHECK hook.
Cc: stable@vger.kernel.org
Fixes: 98de59bfe4b2 ("take calculation of final prot in security_mmap_file() into a helper")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f1c97a1b4ef709e3f066f82e3ba3108c3b133ae6 upstream.
When arch_prepare_optimized_kprobe calculating jump destination address,
it copies original instructions from jmp-optimized kprobe (see
__recover_optprobed_insn), and calculated based on length of original
instruction.
arch_check_optimized_kprobe does not check KPROBE_FLAG_OPTIMATED when
checking whether jmp-optimized kprobe exists.
As a result, setup_detour_execution may jump to a range that has been
overwritten by jump destination address, resulting in an inval opcode error.
For example, assume that register two kprobes whose addresses are
<func+9> and <func+11> in "func" function.
The original code of "func" function is as follows:
0xffffffff816cb5e9 <+9>: push %r12
0xffffffff816cb5eb <+11>: xor %r12d,%r12d
0xffffffff816cb5ee <+14>: test %rdi,%rdi
0xffffffff816cb5f1 <+17>: setne %r12b
0xffffffff816cb5f5 <+21>: push %rbp
1.Register the kprobe for <func+11>, assume that is kp1, corresponding optimized_kprobe is op1.
After the optimization, "func" code changes to:
0xffffffff816cc079 <+9>: push %r12
0xffffffff816cc07b <+11>: jmp 0xffffffffa0210000
0xffffffff816cc080 <+16>: incl 0xf(%rcx)
0xffffffff816cc083 <+19>: xchg %eax,%ebp
0xffffffff816cc084 <+20>: (bad)
0xffffffff816cc085 <+21>: push %rbp
Now op1->flags == KPROBE_FLAG_OPTIMATED;
2. Register the kprobe for <func+9>, assume that is kp2, corresponding optimized_kprobe is op2.
register_kprobe(kp2)
register_aggr_kprobe
alloc_aggr_kprobe
__prepare_optimized_kprobe
arch_prepare_optimized_kprobe
__recover_optprobed_insn // copy original bytes from kp1->optinsn.copied_insn,
// jump address = <func+14>
3. disable kp1:
disable_kprobe(kp1)
__disable_kprobe
...
if (p == orig_p || aggr_kprobe_disabled(orig_p)) {
ret = disarm_kprobe(orig_p, true) // add op1 in unoptimizing_list, not unoptimized
orig_p->flags |= KPROBE_FLAG_DISABLED; // op1->flags == KPROBE_FLAG_OPTIMATED | KPROBE_FLAG_DISABLED
...
4. unregister kp2
__unregister_kprobe_top
...
if (!kprobe_disabled(ap) && !kprobes_all_disarmed) {
optimize_kprobe(op)
...
if (arch_check_optimized_kprobe(op) < 0) // because op1 has KPROBE_FLAG_DISABLED, here not return
return;
p->kp.flags |= KPROBE_FLAG_OPTIMIZED; // now op2 has KPROBE_FLAG_OPTIMIZED
}
"func" code now is:
0xffffffff816cc079 <+9>: int3
0xffffffff816cc07a <+10>: push %rsp
0xffffffff816cc07b <+11>: jmp 0xffffffffa0210000
0xffffffff816cc080 <+16>: incl 0xf(%rcx)
0xffffffff816cc083 <+19>: xchg %eax,%ebp
0xffffffff816cc084 <+20>: (bad)
0xffffffff816cc085 <+21>: push %rbp
5. if call "func", int3 handler call setup_detour_execution:
if (p->flags & KPROBE_FLAG_OPTIMIZED) {
...
regs->ip = (unsigned long)op->optinsn.insn + TMPL_END_IDX;
...
}
The code for the destination address is
0xffffffffa021072c: push %r12
0xffffffffa021072e: xor %r12d,%r12d
0xffffffffa0210731: jmp 0xffffffff816cb5ee <func+14>
However, <func+14> is not a valid start instruction address. As a result, an error occurs.
Link: https://lore.kernel.org/all/20230216034247.32348-3-yangjihong1@huawei.com/
Fixes: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 868a6fc0ca2407622d2833adefe1c4d284766c4c upstream.
Since the following commit:
commit f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code")
modified the update timing of the KPROBE_FLAG_OPTIMIZED, a optimized_kprobe
may be in the optimizing or unoptimizing state when op.kp->flags
has KPROBE_FLAG_OPTIMIZED and op->list is not empty.
The __recover_optprobed_insn check logic is incorrect, a kprobe in the
unoptimizing state may be incorrectly determined as unoptimizing.
As a result, incorrect instructions are copied.
The optprobe_queued_unopt function needs to be exported for invoking in
arch directory.
Link: https://lore.kernel.org/all/20230216034247.32348-2-yangjihong1@huawei.com/
Fixes: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code")
Cc: stable@vger.kernel.org
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 04ffde1319a715bd0550ded3580d4ea3bc003776 ]
While there is logic about the difference between ksize and usize,
copy_struct_from_user() didn't check the size of the destination buffer
(when it was known) against ksize. Add this check so there is an upper
bounds check on the possible memset() call, otherwise lower bounds
checks made by callers will trigger bounds warnings under -Warray-bounds.
Seen under GCC 13:
In function 'copy_struct_from_user',
inlined from 'iommufd_fops_ioctl' at
../drivers/iommu/iommufd/main.c:333:8:
../include/linux/fortify-string.h:59:33: warning: '__builtin_memset' offset [57, 4294967294] is out of the bounds [0, 56] of object 'buf' with type 'union ucmd_buffer' [-Warray-bounds=]
59 | #define __underlying_memset __builtin_memset
| ^
../include/linux/fortify-string.h:453:9: note: in expansion of macro '__underlying_memset'
453 | __underlying_memset(p, c, __fortify_size); \
| ^~~~~~~~~~~~~~~~~~~
../include/linux/fortify-string.h:461:25: note: in expansion of macro '__fortify_memset_chk'
461 | #define memset(p, c, s) __fortify_memset_chk(p, c, s, \
| ^~~~~~~~~~~~~~~~~~~~
../include/linux/uaccess.h:334:17: note: in expansion of macro 'memset'
334 | memset(dst + size, 0, rest);
| ^~~~~~
../drivers/iommu/iommufd/main.c: In function 'iommufd_fops_ioctl':
../drivers/iommu/iommufd/main.c:311:27: note: 'buf' declared here
311 | union ucmd_buffer buf;
| ^~~
Cc: Christian Brauner <brauner@kernel.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alexander Potapenko <glider@google.com>
Acked-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/lkml/20230203193523.never.667-kees@kernel.org/
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0cae5ded535c3a80aed94f119bbd4ee3ae284a65 ]
Currently, RCU_LOCKDEP_WARN() checks the condition before checking
to see if lockdep is still enabled. This is necessary to avoid the
false-positive splats fixed by commit 3066820034b5dd ("rcu: Reject
RCU_LOCKDEP_WARN() false positives"). However, the current state can
result in false-positive splats during early boot before lockdep is fully
initialized. This commit therefore checks debug_lockdep_rcu_enabled()
both before and after checking the condition, thus avoiding both sets
of false-positive error reports.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0ab1438bad43d95877f848b7df551bd431680270 ]
<linux/kconfig.h> is included from all the kernel-space source files,
including C, assembly, linker scripts. It is intended to contain a
minimal set of macros to evaluate CONFIG options.
IF_ENABLED() is an intruder here because (x ? y : z) is C code, which
should not be included from assembly files or linker scripts.
Also, <linux/kconfig.h> is no longer self-contained because NULL is
defined in <linux/stddef.h>.
Move IF_ENABLED() out to <linux/kernel.h> as PTR_IF(). PTF_IF()
takes the general boolean expression instead of a CONFIG option
so that it fits better in <linux/kernel.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Stable-dep-of: 18ab69c8ca56 ("Input: iqs269a - do not poll during suspend or resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fdff966bfde7cf0c85562d2bfb1ff1ba83da5f7b ]
Add struct snd_pcm_substream forward declaration
Fixes: 078a85f2806f ("ASoC: dapm: Only power up active channels from a DAI")
Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230215132851.1626881-1-lucas.tanure@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4dc73c679114a2f408567e2e44770ed934190db2 ]
If we are swapping over NFSv4, we may not be able to allocate memory to
start the state-manager thread at the time when we need it.
So keep it always running when swap is enabled, and just signal it to
start.
This requires updating and testing the cl_swapper count on the root
rpc_clnt after following all ->cl_parent links.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Stable-dep-of: b46d80bd2d6e ("nfs4trace: fix state manager flag printing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c9d27c6be518b4ef2966d9564654ef99292ea1b3 ]
The MIPI DCS specification demands that brightness values are sent in
big endian byte order. It also states that one parameter (i.e. one byte)
shall be sent/received for 8 bit wide values, and two parameters shall
be used for values that are between 9 and 16 bits wide.
Add new functions to properly handle 16-bit brightness in big endian,
since the two 8- and 16-bit cases are distinct from each other.
[richard: use separate functions instead of switch/case]
[richard: split into 16-bit component]
Fixes: 1a9d759331b8 ("drm/dsi: Implement DCS set/get display brightness")
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Link: https://android.googlesource.com/kernel/msm/+/754affd62d0ee268c686c53169b1dbb7deac8550
[richard: fix 16-bit brightness_get]
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Tested-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116224909.23884-2-mailingradian@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 584f3742890e966d2f0a1f3c418c9ead70b2d99e ]
Add sock_init_data_uid() to explicitly initialize the socket uid.
To initialise the socket uid, sock_init_data() assumes a the struct
socket* sock is always embedded in a struct socket_alloc, used to
access the corresponding inode uid. This may not be true.
Examples are sockets created in tun_chr_open() and tap_open().
Fixes: 86741ec25462 ("net: core: Add a UID field to struct sock.")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 28319d6dc5e2ffefa452c2377dd0f71621b5bff0 ]
RCU Tasks and PID-namespace unshare can interact in do_exit() in a
complicated circular dependency:
1) TASK A calls unshare(CLONE_NEWPID), this creates a new PID namespace
that every subsequent child of TASK A will belong to. But TASK A
doesn't itself belong to that new PID namespace.
2) TASK A forks() and creates TASK B. TASK A stays attached to its PID
namespace (let's say PID_NS1) and TASK B is the first task belonging
to the new PID namespace created by unshare() (let's call it PID_NS2).
3) Since TASK B is the first task attached to PID_NS2, it becomes the
PID_NS2 child reaper.
4) TASK A forks() again and creates TASK C which get attached to PID_NS2.
Note how TASK C has TASK A as a parent (belonging to PID_NS1) but has
TASK B (belonging to PID_NS2) as a pid_namespace child_reaper.
5) TASK B exits and since it is the child reaper for PID_NS2, it has to
kill all other tasks attached to PID_NS2, and wait for all of them to
die before getting reaped itself (zap_pid_ns_process()).
6) TASK A calls synchronize_rcu_tasks() which leads to
synchronize_srcu(&tasks_rcu_exit_srcu).
7) TASK B is waiting for TASK C to get reaped. But TASK B is under a
tasks_rcu_exit_srcu SRCU critical section (exit_notify() is between
exit_tasks_rcu_start() and exit_tasks_rcu_finish()), blocking TASK A.
8) TASK C exits and since TASK A is its parent, it waits for it to reap
TASK C, but it can't because TASK A waits for TASK B that waits for
TASK C.
Pid_namespace semantics can hardly be changed at this point. But the
coverage of tasks_rcu_exit_srcu can be reduced instead.
The current task is assumed not to be concurrently reapable at this
stage of exit_notify() and therefore tasks_rcu_exit_srcu can be
temporarily relaxed without breaking its constraints, providing a way
out of the deadlock scenario.
[ paulmck: Fix build failure by adding additional declaration. ]
Fixes: 3f95aa81d265 ("rcu: Make TASKS_RCU handle tasks that are almost done exiting")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Eric W . Biederman <ebiederm@xmission.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 47904aed898a08f028572b9b5a5cc101ddfb2d82 ]
The type of member ->irqs_sum is unsigned long, but kstat_cpu_irqs_sum()
returns int, which can result in truncation. Therefore, change the
kstat_cpu_irqs_sum() function's return value to unsigned long to avoid
truncation.
Fixes: f2c66cd8eedd ("/proc/stat: scalability of irq num per cpu")
Reported-by: Elliott, Robert (Servers) <elliott@hpe.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Josh Don <joshdon@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 74e19ef0ff8061ef55957c3abd71614ef0f42f47 upstream.
The results of "access_ok()" can be mis-speculated. The result is that
you can end speculatively:
if (access_ok(from, size))
// Right here
even for bad from/size combinations. On first glance, it would be ideal
to just add a speculation barrier to "access_ok()" so that its results
can never be mis-speculated.
But there are lots of system calls just doing access_ok() via
"copy_to_user()" and friends (example: fstat() and friends). Those are
generally not problematic because they do not _consume_ data from
userspace other than the pointer. They are also very quick and common
system calls that should not be needlessly slowed down.
"copy_from_user()" on the other hand uses a user-controller pointer and
is frequently followed up with code that might affect caches. Take
something like this:
if (!copy_from_user(&kernelvar, uptr, size))
do_something_with(kernelvar);
If userspace passes in an evil 'uptr' that *actually* points to a kernel
addresses, and then do_something_with() has cache (or other)
side-effects, it could allow userspace to infer kernel data values.
Add a barrier to the common copy_from_user() code to prevent
mis-speculated values which happen after the copy.
Also add a stub for architectures that do not define barrier_nospec().
This makes the macro usable in generic code.
Since the barrier is now usable in generic code, the x86 #ifdef in the
BPF code can also go away.
Reported-by: Jordy Zomer <jordyzomer@google.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Daniel Borkmann <daniel@iogearbox.net> # BPF bits
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d7bf7f3b813e3755226bcb5114ad2ac477514ebf ]
add_latent_entropy() is called every time a process forks, in
kernel_clone(). This in turn calls add_device_randomness() using the
latent entropy global state. add_device_randomness() does two things:
2) Mixes into the input pool the latent entropy argument passed; and
1) Mixes in a cycle counter, a sort of measurement of when the event
took place, the high precision bits of which are presumably
difficult to predict.
(2) is impossible without CONFIG_GCC_PLUGIN_LATENT_ENTROPY=y. But (1) is
always possible. However, currently CONFIG_GCC_PLUGIN_LATENT_ENTROPY=n
disables both (1) and (2), instead of just (2).
This commit causes the CONFIG_GCC_PLUGIN_LATENT_ENTROPY=n case to still
do (1) by passing NULL (len 0) to add_device_randomness() when add_latent_
entropy() is called.
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Emese Revfy <re.emese@gmail.com>
Fixes: 38addce8b600 ("gcc-plugins: Add latent_entropy plugin")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit ca43ccf41224b023fc290073d5603a755fd12eed upstream.
Eric Dumazet pointed out [0] that when we call skb_set_owner_r()
for ipv6_pinfo.pktoptions, sk_rmem_schedule() has not been called,
resulting in a negative sk_forward_alloc.
We add a new helper which clones a skb and sets its owner only
when sk_rmem_schedule() succeeds.
Note that we move skb_set_owner_r() forward in (dccp|tcp)_v6_do_rcv()
because tcp_send_synack() can make sk_forward_alloc negative before
ipv6_opt_accepted() in the crossed SYN-ACK or self-connect() cases.
[0]: https://lore.kernel.org/netdev/CANn89iK9oc20Jdi_41jb9URdF210r7d1Y-+uypbMSbOfY6jqrg@mail.gmail.com/
Fixes: 323fbd0edf3f ("net: dccp: Add handling of IPV6_PKTOPTIONS to dccp_v6_do_rcv()")
Fixes: 3df80d9320bc ("[DCCP]: Introduce DCCPv6")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ec4288fe63966b26d53907212ecd05dfa81dd2cc upstream.
Users can specify the hugetlb page size in the mmap, shmget and
memfd_create system calls. This is done by using 6 bits within the flags
argument to encode the base-2 logarithm of the desired page size. The
routine hstate_sizelog() uses the log2 value to find the corresponding
hugetlb hstate structure. Converting the log2 value (page_size_log) to
potential hugetlb page size is the simple statement:
1UL << page_size_log
Because only 6 bits are used for page_size_log, the left shift can not be
greater than 63. This is fine on 64 bit architectures where a long is 64
bits. However, if a value greater than 31 is passed on a 32 bit
architecture (where long is 32 bits) the shift will result in undefined
behavior. This was generally not an issue as the result of the undefined
shift had to exactly match hugetlb page size to proceed.
Recent improvements in runtime checking have resulted in this undefined
behavior throwing errors such as reported below.
Fix by comparing page_size_log to BITS_PER_LONG before doing shift.
Link: https://lkml.kernel.org/r/20230216013542.138708-1-mike.kravetz@oracle.com
Link: https://lore.kernel.org/lkml/CA+G9fYuei_Tr-vN9GS7SfFyU1y9hNysnf=PB7kT0=yv4MiPgVg@mail.gmail.com/
Fixes: 42d7395feb56 ("mm: support more pagesizes for MAP_HUGETLB/SHM_HUGETLB")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Jesper Juhl <jesperjuhl76@gmail.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 569653f022a29a1a44ea9de5308b657228303fa5 ]
No one provides wp_gpio, so let's remove it to avoid issues with
the nvmem core putting this gpio.
Cc: stable@vger.kernel.org
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: ab3428cfd9aa ("nvmem: core: fix registration vs use race")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 54aa39a513dbf2164ca462a19f04519b2407a224 ]
Currently in phy_init_eee() the driver unconditionally configures the PHY
to stop RX_CLK after entering Rx LPI state. This causes an LPI interrupt
storm on my qcs404-base board.
Change the PHY initialization so that for "qcom,qcs404-ethqos" compatible
device RX_CLK continues to run even in Rx LPI state.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 03702d4d29be4e2510ec80b248dbbde4e57030d9 ]
Since commit 58e0be1ef6118 ("net: use struct_group to copy ip/ipv6
header addresses"), ip and ipv6 headers started to use the __struct_group
definition, which is defined at include/uapi/linux/stddef.h. However,
linux/stddef.h isn't explicitly included in include/uapi/linux/{ip,ipv6}.h,
which breaks build of xskxceiver bpf selftest if you install the uapi
headers in the system:
$ make V=1 xskxceiver -C tools/testing/selftests/bpf
...
make: Entering directory '(...)/tools/testing/selftests/bpf'
gcc -g -O0 -rdynamic -Wall -Werror (...)
In file included from xskxceiver.c:79:
/usr/include/linux/ip.h:103:9: error: expected specifier-qualifier-list before ‘__struct_group’
103 | __struct_group(/* no tag */, addrs, /* no attrs */,
| ^~~~~~~~~~~~~~
...
Include the missing <linux/stddef.h> dependency in ip.h and do the
same for the ipv6.h header.
Fixes: 58e0be1ef611 ("net: use struct_group to copy ip/ipv6 header addresses")
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7ce82f4c3f3ead13a9d9498768e3b1a79975c4d8 ]
We might fail to isolate huge page due to e.g. the page is under
migration which cleared HPageMigratable. We should return errno in this
case rather than always return 1 which could confuse the user, i.e. the
caller might think all of the memory is migrated while the hugetlb page is
left behind. We make the prototype of isolate_huge_page consistent with
isolate_lru_page as suggested by Huang Ying and rename isolate_huge_page
to isolate_hugetlb as suggested by Muchun to improve the readability.
Link: https://lkml.kernel.org/r/20220530113016.16663-4-linmiaohe@huawei.com
Fixes: e8db67eb0ded ("mm: migrate: move_pages() supports thp migration")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Suggested-by: Huang Ying <ying.huang@intel.com>
Reported-by: kernel test robot <lkp@intel.com> (build error)
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 73bdf65ea748 ("migrate: hugetlb: check for hugetlb shared PMD in node migration")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f6c052afe6f802d87c74153b7a57c43b2e9faf07 ]
Wp-gpios property can be used on NVMEM nodes and the same property can
be also used on MTD NAND nodes. In case of the wp-gpios property is
defined at NAND level node, the GPIO management is done at NAND driver
level. Write protect is disabled when the driver is probed or resumed
and is enabled when the driver is released or suspended.
When no partitions are defined in the NAND DT node, then the NAND DT node
will be passed to NVMEM framework. If wp-gpios property is defined in
this node, the GPIO resource is taken twice and the NAND controller
driver fails to probe.
It would be possible to set config->wp_gpio at MTD level before calling
nvmem_register function but NVMEM framework will toggle this GPIO on
each write when this GPIO should only be controlled at NAND level driver
to ensure that the Write Protect has not been enabled.
A way to fix this conflict is to add a new boolean flag in nvmem_config
named ignore_wp. In case ignore_wp is set, the GPIO resource will
be managed by the provider.
Fixes: 2a127da461a9 ("nvmem: add support for the write-protect pin")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220220151432.16605-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: ab3428cfd9aa ("nvmem: core: fix registration vs use race")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 3489dbb696d25602aea8c3e669a6d43b76bd5358 upstream.
Patch series "Fixes for hugetlb mapcount at most 1 for shared PMDs".
This issue of mapcount in hugetlb pages referenced by shared PMDs was
discussed in [1]. The following two patches address user visible behavior
caused by this issue.
[1] https://lore.kernel.org/linux-mm/Y9BF+OCdWnCSilEu@monkey/
This patch (of 2):
A hugetlb page will have a mapcount of 1 if mapped by multiple processes
via a shared PMD. This is because only the first process increases the
map count, and subsequent processes just add the shared PMD page to their
page table.
page_mapcount is being used to decide if a hugetlb page is shared or
private in /proc/PID/smaps. Pages referenced via a shared PMD were
incorrectly being counted as private.
To fix, check for a shared PMD if mapcount is 1. If a shared PMD is found
count the hugetlb page as shared. A new helper to check for a shared PMD
is added.
[akpm@linux-foundation.org: simplification, per David]
[akpm@linux-foundation.org: hugetlb.h: include page_ref.h for page_count()]
Link: https://lkml.kernel.org/r/20230126222721.222195-2-mike.kravetz@oracle.com
Fixes: 25ee01a2fca0 ("mm: hugetlb: proc: add hugetlb-related fields to /proc/PID/smaps")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ddce1e091757d0259107c6c0c7262df201de2b66 ]
A listening socket linked to a sockmap has its sk_prot overridden. It
points to one of the struct proto variants in tcp_bpf_prots. The variant
depends on the socket's family and which sockmap programs are attached.
A child socket cloned from a TCP listener initially inherits their sk_prot.
But before cloning is finished, we restore the child's proto to the
listener's original non-tcp_bpf_prots one. This happens in
tcp_create_openreq_child -> tcp_bpf_clone.
Today, in tcp_bpf_clone we detect if the child's proto should be restored
by checking only for the TCP_BPF_BASE proto variant. This is not
correct. The sk_prot of listening socket linked to a sockmap can point to
to any variant in tcp_bpf_prots.
If the listeners sk_prot happens to be not the TCP_BPF_BASE variant, then
the child socket unintentionally is left if the inherited sk_prot by
tcp_bpf_clone.
This leads to issues like infinite recursion on close [1], because the
child state is otherwise not set up for use with tcp_bpf_prot operations.
Adjust the check in tcp_bpf_clone to detect all of tcp_bpf_prots variants.
Note that it wouldn't be sufficient to check the socket state when
overriding the sk_prot in tcp_bpf_update_proto in order to always use the
TCP_BPF_BASE variant for listening sockets. Since commit
b8b8315e39ff ("bpf, sockmap: Remove unhash handler for BPF sockmap usage")
it is possible for a socket to transition to TCP_LISTEN state while already
linked to a sockmap, e.g. connect() -> insert into map ->
connect(AF_UNSPEC) -> listen().
[1]: https://lore.kernel.org/all/00000000000073b14905ef2e7401@google.com/
Fixes: e80251555f0b ("tcp_bpf: Don't let child socket inherit parent protocol ops on copy")
Reported-by: syzbot+04c21ed96d861dccc5cd@syzkaller.appspotmail.com
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230113-sockmap-fix-v2-2-1e0ee7ac2f90@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit a44b7651489f26271ac784b70895e8a85d0cebf4 upstream.
An SCTP endpoint can start an association through a path and tear it
down over another one. That means the initial path will not see the
shutdown sequence, and the conntrack entry will remain in ESTABLISHED
state for 5 days.
By merging the HEARTBEAT_ACKED and ESTABLISHED states into one
ESTABLISHED state, there remains no difference between a primary or
secondary path. The timeout for the merged ESTABLISHED state is set to
210 seconds (hb_interval * max_path_retrans + rto_max). So, even if a
path doesn't see the shutdown sequence, it will expire in a reasonable
amount of time.
With this change in place, there is now more than one state from which
we can transition to ESTABLISHED, COOKIE_ECHOED and HEARTBEAT_SENT, so
handle the setting of ASSURED bit whenever a state change has happened
and the new state is ESTABLISHED. Removed the check for dir==REPLY since
the transition to ESTABLISHED can happen only in the reply direction.
Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.")
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 26471d4a6cf8d5d0bd0fb55c7169de7d67cc703a ]
Sometimes it's useful to have well-defined SI metric prefix to be used
to self-describe the formulas or equations.
List most popular ones in the units.h.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: c8c37bc51451 ("i2c: designware: use casting of u64 in clock multiplication to avoid overflow")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2ee5f8f05949735fa2f4c463a5e13fcb3660c719 ]
As there are the temperature units, let's add the Watt macros definition.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: c8c37bc51451 ("i2c: designware: use casting of u64 in clock multiplication to avoid overflow")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 79cc1ba7badf9e7a12af99695a557e9ce27ee967 upstream.
Several run-time checkers (KASAN, UBSAN, KFENCE, KCSAN, sched) roll
their own warnings, and each check "panic_on_warn". Consolidate this
into a single function so that future instrumentation can be added in
a single location.
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Gow <davidgow@google.com>
Cc: tangmeng <tangmeng@uniontech.com>
Cc: Jann Horn <jannh@google.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: kasan-dev@googlegroups.com
Cc: linux-mm@kvack.org
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20221117234328.594699-4-keescook@chromium.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 0e25498f8cd43c1b5aa327f373dd094e9a006da7 upstream.
There are two big uses of do_exit. The first is it's design use to be
the guts of the exit(2) system call. The second use is to terminate
a task after something catastrophic has happened like a NULL pointer
in kernel code.
Add a function make_task_dead that is initialy exactly the same as
do_exit to cover the cases where do_exit is called to handle
catastrophic failure. In time this can probably be reduced to just a
light wrapper around do_task_dead. For now keep it exactly the same so
that there will be no behavioral differences introducing this new
concept.
Replace all of the uses of do_exit that use it for catastraphic
task cleanup with make_task_dead to make it clear what the code
is doing.
As part of this rename rewind_stack_do_exit
rewind_stack_and_make_dead.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 9df918698408fd914493aba0b7858fef50eba63a upstream.
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.
All filesystem syctls now get reviewed by fs folks. This commit
follows the commit of fs, move the oops_all_cpu_backtrace sysctl to
its own file, kernel/panic.c.
Signed-off-by: tangmeng <tangmeng@uniontech.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 3ddd9a808cee7284931312f2f3e854c9617f44b2 upstream.
Patch series "sysctl: first set of kernel/sysctl cleanups", v2.
Finally had time to respin the series of the work we had started last
year on cleaning up the kernel/sysct.c kitchen sink. People keeps
stuffing their sysctls in that file and this creates a maintenance
burden. So this effort is aimed at placing sysctls where they actually
belong.
I'm going to split patches up into series as there is quite a bit of
work.
This first set adds register_sysctl_init() for uses of registerting a
sysctl on the init path, adds const where missing to a few places,
generalizes common values so to be more easy to share, and starts the
move of a few kernel/sysctl.c out where they belong.
The majority of rework on v2 in this first patch set is 0-day fixes.
Eric Biederman's feedback is later addressed in subsequent patch sets.
I'll only post the first two patch sets for now. We can address the
rest once the first two patch sets get completely reviewed / Acked.
This patch (of 9):
The kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.
Today though folks heavily rely on tables on kernel/sysctl.c so they can
easily just extend this table with their needed sysctls. In order to
help users move their sysctls out we need to provide a helper which can
be used during code initialization.
We special-case the initialization use of register_sysctl() since it
*is* safe to fail, given all that sysctls do is provide a dynamic
interface to query or modify at runtime an existing variable. So the
use case of register_sysctl() on init should *not* stop if the sysctls
don't end up getting registered. It would be counter productive to stop
boot if a simple sysctl registration failed.
Provide a helper for init then, and document the recommended init levels
to use for callers of this routine. We will later use this in
subsequent patches to start slimming down kernel/sysctl.c tables and
moving sysctl registration to the code which actually needs these
sysctls.
[mcgrof@kernel.org: major commit log and documentation rephrasing also moved to fs/proc/proc_sysctl.c ]
Link: https://lkml.kernel.org/r/20211123202347.818157-1-mcgrof@kernel.org
Link: https://lkml.kernel.org/r/20211123202347.818157-2-mcgrof@kernel.org
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Paul Turner <pjt@google.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Qing Wang <wangqing@vivo.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a3be19b91ea7121d388084e8c07f5b1b982eb40c ]
It was observed that the kernel would potentially send
ISCSI_KEVENT_UNBIND_SESSION multiple times. Introduce 'target_state' in
iscsi_cls_session() to make sure session will send only one unbind session
event.
This introduces a regression wrt. the issue fixed in commit 13e60d3ba287
("scsi: iscsi: Report unbind session event when the target has been
removed"). If iscsid dies for any reason after sending an unbind session to
kernel, once iscsid is restarted, the kernel's ISCSI_KEVENT_UNBIND_SESSION
event is lost and userspace is then unable to logout. However, the session
is actually in invalid state (its target_id is INVALID) so iscsid should
not sync this session during restart.
Consequently we need to check the session's target state during iscsid
restart. If session is in unbound state, do not sync this session and
perform session teardown. This is OK because once a session is unbound, we
can not recover it any more (mainly because its target id is INVALID).
Signed-off-by: Wenchao Hao <haowenchao@huawei.com>
Link: https://lore.kernel.org/r/20221126010752.231917-1-haowenchao@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b68777d54fac21fc833ec26ea1a2a84f975ab035 ]
sk->sk_user_data has multiple users, which are not compatible with each
other. Writers must synchronize by grabbing the sk->sk_callback_lock.
l2tp currently fails to grab the lock when modifying the underlying tunnel
socket fields. Fix it by adding appropriate locking.
We err on the side of safety and grab the sk_callback_lock also inside the
sk_destruct callback overridden by l2tp, even though there should be no
refs allowing access to the sock at the time when sk_destruct gets called.
v4:
- serialize write to sk_user_data in l2tp sk_destruct
v3:
- switch from sock lock to sk_callback_lock
- document write-protection for sk_user_data
v2:
- update Fixes to point to origin of the bug
- use real names in Reported/Tested-by tags
Cc: Tom Parkin <tparkin@katalix.com>
Fixes: 3557baabf280 ("[L2TP]: PPP over L2TP driver core")
Reported-by: Haowei Yan <g1042620637@gmail.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 0b2c59720e65 ("l2tp: close all race conditions in l2tp_tunnel_register()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3a415d59c1dbec9d772dbfab2d2520d98360caae ]
syzbot reported a nasty crash [1] in net_tx_action() which
made little sense until we got a repro.
This repro installs a taprio qdisc, but providing an
invalid TCA_RATE attribute.
qdisc_create() has to destroy the just initialized
taprio qdisc, and taprio_destroy() is called.
However, the hrtimer used by taprio had already fired,
therefore advance_sched() called __netif_schedule().
Then net_tx_action was trying to use a destroyed qdisc.
We can not undo the __netif_schedule(), so we must wait
until one cpu serviced the qdisc before we can proceed.
Many thanks to Alexander Potapenko for his help.
[1]
BUG: KMSAN: uninit-value in queued_spin_trylock include/asm-generic/qspinlock.h:94 [inline]
BUG: KMSAN: uninit-value in do_raw_spin_trylock include/linux/spinlock.h:191 [inline]
BUG: KMSAN: uninit-value in __raw_spin_trylock include/linux/spinlock_api_smp.h:89 [inline]
BUG: KMSAN: uninit-value in _raw_spin_trylock+0x92/0xa0 kernel/locking/spinlock.c:138
queued_spin_trylock include/asm-generic/qspinlock.h:94 [inline]
do_raw_spin_trylock include/linux/spinlock.h:191 [inline]
__raw_spin_trylock include/linux/spinlock_api_smp.h:89 [inline]
_raw_spin_trylock+0x92/0xa0 kernel/locking/spinlock.c:138
spin_trylock include/linux/spinlock.h:359 [inline]
qdisc_run_begin include/net/sch_generic.h:187 [inline]
qdisc_run+0xee/0x540 include/net/pkt_sched.h:125
net_tx_action+0x77c/0x9a0 net/core/dev.c:5086
__do_softirq+0x1cc/0x7fb kernel/softirq.c:571
run_ksoftirqd+0x2c/0x50 kernel/softirq.c:934
smpboot_thread_fn+0x554/0x9f0 kernel/smpboot.c:164
kthread+0x31b/0x430 kernel/kthread.c:376
ret_from_fork+0x1f/0x30
Uninit was created at:
slab_post_alloc_hook mm/slab.h:732 [inline]
slab_alloc_node mm/slub.c:3258 [inline]
__kmalloc_node_track_caller+0x814/0x1250 mm/slub.c:4970
kmalloc_reserve net/core/skbuff.c:358 [inline]
__alloc_skb+0x346/0xcf0 net/core/skbuff.c:430
alloc_skb include/linux/skbuff.h:1257 [inline]
nlmsg_new include/net/netlink.h:953 [inline]
netlink_ack+0x5f3/0x12b0 net/netlink/af_netlink.c:2436
netlink_rcv_skb+0x55d/0x6c0 net/netlink/af_netlink.c:2507
rtnetlink_rcv+0x30/0x40 net/core/rtnetlink.c:6108
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0xf3b/0x1270 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x1288/0x1440 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0xabc/0xe90 net/socket.c:2482
___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2536
__sys_sendmsg net/socket.c:2565 [inline]
__do_sys_sendmsg net/socket.c:2574 [inline]
__se_sys_sendmsg net/socket.c:2572 [inline]
__x64_sys_sendmsg+0x367/0x540 net/socket.c:2572
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
CPU: 0 PID: 13 Comm: ksoftirqd/0 Not tainted 6.0.0-rc2-syzkaller-47461-gac3859c02d7f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022
Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7ef9651e9792b08eb310c6beb202cbc947f43cab ]
When a driver keeps a clock prepared (or enabled) during the whole
lifetime of the driver, these helpers allow to simplify the drivers.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220520075737.758761-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stable-dep-of: 340cb392a038 ("memory: atmel-sdramc: Fix missing clk_disable_unprepare in atmel_ramc_probe()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 09794a5a6c348f629b35fc1687071a1622ef4265 upstream.
Simplify:
#define ALIGN_STRUCTFIELD(type) ((int)(offsetof(struct {char a; type b;}, b)))
with
#define ALIGN_STRUCTFIELD(type) __alignof__(struct {type b;})
Which works just the same.
Link: https://lore.kernel.org/all/a7d202457150472588df0bd3b7334b3f@AcuMS.aculab.com/
Link: https://lkml.kernel.org/r/20220802154412.513c50e3@gandalf.local.home
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cd702d18c882d5a4ea44bbdb38edd5d5577ef640 upstream.
Add a helper to evaluate ACPI usb device specific method (_DSM) provided
in case the USB3 port shouldn't enter U1 and U2 link states.
This _DSM was added as port specific retimer configuration may lead to
exit latencies growing beyond U1/U2 exit limits, and OS needs a way to
find which ports can't support U1/U2 link power management states.
This _DSM is also used by windows:
Link: https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/usb-device-specific-method---dsm-
Some patch issues found in testing resolved by Ron Lee
Cc: stable@vger.kernel.org
Tested-by: Ron Lee <ron.lee@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230116142216.1141605-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0a3212de8ab3e2ce5808c6265855e528d4a6767b ]
Fix a typo of printing FLUSH_DELAYED_REFS event in flush_space() as
FLUSH_ELAYED_REFS.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5c1f7f1090947d494c30042123e0ec846f696336 ]
usb suspend clock has a gate shared with usb_root_clk.
Fixes: 9c140d9926761 ("clk: imx: Add support for i.MX8MP clock driver")
Cc: stable@vger.kernel.org # v5.19+
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/1664549663-20364-1-git-send-email-jun.li@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 43896f56b59eeaf08687fa976257ae7083d01b41 ]
clkout1 and clkout2 allow to supply clocks from the SoC to the board,
which is used by some board designs to provide reference clocks.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220427162131.3127303-1-l.stach@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Stable-dep-of: 5c1f7f109094 ("dt-bindings: clocks: imx8mp: Add ID for usb suspend clock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|