Age | Commit message (Collapse) | Author | Files | Lines |
|
Merge in late fixes to prepare for the 6.5 net-next PR.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This finishes the job of always holding the mmap write lock when
extending the user stack vma, and removes the 'write_locked' argument
from the vm helper functions again.
For some cases, we just avoid expanding the stack at all: drivers and
page pinning really shouldn't be extending any stacks. Let's see if any
strange users really wanted that.
It's worth noting that architectures that weren't converted to the new
lock_mm_and_find_vma() helper function are left using the legacy
"expand_stack()" function, but it has been changed to drop the mmap_lock
and take it for writing while expanding the vma. This makes it fairly
straightforward to convert the remaining architectures.
As a result of dropping and re-taking the lock, the calling conventions
for this function have also changed, since the old vma may no longer be
valid. So it will now return the new vma if successful, and NULL - and
the lock dropped - if the area could not be extended.
Tested-by: Vegard Nossum <vegard.nossum@oracle.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> # ia64
Tested-by: Frank Scheiner <frank.scheiner@web.de> # ia64
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
syzbot reported a warning in __local_bh_enable_ip(). [0]
Commit 8d61f926d420 ("netlink: fix potential deadlock in
netlink_set_err()") converted read_lock(&nl_table_lock) to
read_lock_irqsave() in __netlink_diag_dump() to prevent a deadlock.
However, __netlink_diag_dump() calls sock_i_ino() that uses
read_lock_bh() and read_unlock_bh(). If CONFIG_TRACE_IRQFLAGS=y,
read_unlock_bh() finally enables IRQ even though it should stay
disabled until the following read_unlock_irqrestore().
Using read_lock() in sock_i_ino() would trigger a lockdep splat
in another place that was fixed in commit f064af1e500a ("net: fix
a lockdep splat"), so let's add __sock_i_ino() that would be safe
to use under BH disabled.
[0]:
WARNING: CPU: 0 PID: 5012 at kernel/softirq.c:376 __local_bh_enable_ip+0xbe/0x130 kernel/softirq.c:376
Modules linked in:
CPU: 0 PID: 5012 Comm: syz-executor487 Not tainted 6.4.0-rc7-syzkaller-00202-g6f68fc395f49 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
RIP: 0010:__local_bh_enable_ip+0xbe/0x130 kernel/softirq.c:376
Code: 45 bf 01 00 00 00 e8 91 5b 0a 00 e8 3c 15 3d 00 fb 65 8b 05 ec e9 b5 7e 85 c0 74 58 5b 5d c3 65 8b 05 b2 b6 b4 7e 85 c0 75 a2 <0f> 0b eb 9e e8 89 15 3d 00 eb 9f 48 89 ef e8 6f 49 18 00 eb a8 0f
RSP: 0018:ffffc90003a1f3d0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000201 RCX: 1ffffffff1cf5996
RDX: 0000000000000000 RSI: 0000000000000201 RDI: ffffffff8805c6f3
RBP: ffffffff8805c6f3 R08: 0000000000000001 R09: ffff8880152b03a3
R10: ffffed1002a56074 R11: 0000000000000005 R12: 00000000000073e4
R13: dffffc0000000000 R14: 0000000000000002 R15: 0000000000000000
FS: 0000555556726300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000045ad50 CR3: 000000007c646000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
sock_i_ino+0x83/0xa0 net/core/sock.c:2559
__netlink_diag_dump+0x45c/0x790 net/netlink/diag.c:171
netlink_diag_dump+0xd6/0x230 net/netlink/diag.c:207
netlink_dump+0x570/0xc50 net/netlink/af_netlink.c:2269
__netlink_dump_start+0x64b/0x910 net/netlink/af_netlink.c:2374
netlink_dump_start include/linux/netlink.h:329 [inline]
netlink_diag_handler_dump+0x1ae/0x250 net/netlink/diag.c:238
__sock_diag_cmd net/core/sock_diag.c:238 [inline]
sock_diag_rcv_msg+0x31e/0x440 net/core/sock_diag.c:269
netlink_rcv_skb+0x165/0x440 net/netlink/af_netlink.c:2547
sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:280
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x547/0x7f0 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x925/0xe30 net/netlink/af_netlink.c:1914
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg+0xde/0x190 net/socket.c:747
____sys_sendmsg+0x71c/0x900 net/socket.c:2503
___sys_sendmsg+0x110/0x1b0 net/socket.c:2557
__sys_sendmsg+0xf7/0x1c0 net/socket.c:2586
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f5303aaabb9
Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc7506e548 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5303aaabb9
RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003
RBP: 00007f5303a6ed60 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5303a6edf0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Fixes: 8d61f926d420 ("netlink: fix potential deadlock in netlink_set_err()")
Reported-by: syzbot+5da61cf6a9bc1902d422@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=5da61cf6a9bc1902d422
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230626164313.52528-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When using the felix driver (the only one which supports UC filtering
and MC filtering) as a DSA master for a random other DSA switch, one can
see the following stack trace when the downstream switch ports join a
VLAN-aware bridge:
=============================
WARNING: suspicious RCU usage
-----------------------------
net/8021q/vlan_core.c:238 suspicious rcu_dereference_protected() usage!
stack backtrace:
Workqueue: dsa_ordered dsa_slave_switchdev_event_work
Call trace:
lockdep_rcu_suspicious+0x170/0x210
vlan_for_each+0x8c/0x188
dsa_slave_sync_uc+0x128/0x178
__hw_addr_sync_dev+0x138/0x158
dsa_slave_set_rx_mode+0x58/0x70
__dev_set_rx_mode+0x88/0xa8
dev_uc_add+0x74/0xa0
dsa_port_bridge_host_fdb_add+0xec/0x180
dsa_slave_switchdev_event_work+0x7c/0x1c8
process_one_work+0x290/0x568
What it's saying is that vlan_for_each() expects rtnl_lock() context and
it's not getting it, when it's called from the DSA master's ndo_set_rx_mode().
The caller of that - dsa_slave_set_rx_mode() - is the slave DSA
interface's dsa_port_bridge_host_fdb_add() which comes from the deferred
dsa_slave_switchdev_event_work().
We went to great lengths to avoid the rtnl_lock() context in that call
path in commit 0faf890fc519 ("net: dsa: drop rtnl_lock from
dsa_slave_switchdev_event_work"), and calling rtnl_lock() is simply not
an option due to the possibility of deadlocking when calling
dsa_flush_workqueue() from the call paths that do hold rtnl_lock() -
basically all of them.
So, when the DSA master calls vlan_for_each() from its ndo_set_rx_mode(),
the state of the 8021q driver on this device is really not protected
from concurrent access by anything.
Looking at net/8021q/, I don't think that vlan_info->vid_list was
particularly designed with RCU traversal in mind, so introducing an RCU
read-side form of vlan_for_each() - vlan_for_each_rcu() - won't be so
easy, and it also wouldn't be exactly what we need anyway.
In general I believe that the solution isn't in net/8021q/ anyway;
vlan_for_each() is not cut out for this task. DSA doesn't need rtnl_lock()
to be held per se - since it's not a netdev state change that we're
blocking, but rather, just concurrent additions/removals to a VLAN list.
We don't even need sleepable context - the callback of vlan_for_each()
just schedules deferred work.
The proposed escape is to remove the dependency on vlan_for_each() and
to open-code a non-sleepable, rtnl-free alternative to that, based on
copies of the VLAN list modified from .ndo_vlan_rx_add_vid() and
.ndo_vlan_rx_kill_vid().
Fixes: 64fdc5f341db ("net: dsa: sync unicast and multicast addresses for VLAN filters too")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230626154402.3154454-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Stephen reports warnings when rendering phylink kdocs as HTML:
include/linux/phylink.h:110: ERROR: Unexpected indentation.
include/linux/phylink.h:111: WARNING: Block quote ends without a blank line; unexpected unindent.
include/linux/phylink.h:614: WARNING: Inline literal start-string without end-string.
include/linux/phylink.h:644: WARNING: Inline literal start-string without end-string.
Make phylink_pcs_neg_mode() use a proper list format to fix the first
two warnings.
The last two warnings, AFAICT, come from the use of shorthand like
phylink_mode_*(). Perhaps those should be special-cased at the Sphinx
level.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/all/20230626162908.2f149f98@canb.auug.org.au/
Link: https://lore.kernel.org/r/20230626214640.3142252-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add Intel TPMI (Topology Aware Register and PM Capsule
Interface) support to the power capping subsystem, extend the
intel_idle driver to work in VM guests where MWAIT is not available,
extend the system-wide power management diagnostics, fix bugs and
clean up code.
Specifics:
- Introduce power capping core support for Intel TPMI (Topology Aware
Register and PM Capsule Interface) and a TPMI interface driver for
Intel RAPL (Zhang Rui, Dan Carpenter)
- Fix CONFIG_IOSF_MBI dependency in the Intel RAPL power capping
driver (Zhang Rui)
- Fix invalid initialization for pl4_supported field in the Intel
RAPL power capping driver (Sumeet Pawnikar)
- Clean up the intel_idle driver, make it work with VM guests that
cannot use the MWAIT instruction and address the case in which the
host may enter a deep idle state when the guest is idle (Arjan van
de Ven)
- Prevent cpufreq drivers that provide the ->adjust_perf() callback
without a ->fast_switch() one which is used as a fallback from the
former in some cases (Wyes Karny)
- Fix some issues related to the AMD P-state cpufreq driver (Mario
Limonciello, Wyes Karny)
- Fix the energy_performance_preference attribute handling in the
intel_pstate driver in passive mode (Tero Kristo)
- Fix the handling of pm_suspend_target_state when CONFIG_PM is unset
(Kai-Heng Feng)
- Correct spelling mistake in a comment in the hibernation code (Wang
Honghui)
- Add arch_resume_nosmt() prototype to avoid a "missing prototypes"
build warning (Arnd Bergmann)
- Restrict pm_pr_dbg() to system-wide power transitions and use it in
a few additional places (Mario Limonciello)
- Drop verification of in-params from genpd_add_device() and ensure
that all of its callers will do it (Ulf Hansson)
- Prevent possible integer overflows from occurring in
genpd_parse_state() (Nikita Zhandarovich)
- Reorder fieldls in 'struct devfreq_dev_status' to reduce its size
somewhat (Christophe JAILLET)
- Ensure that the Exynos PPMU driver is already loaded before the
Exynos Bus driver starts probing so as to avoid a possible freeze
loading of the kernel modules (Marek Szyprowski)
- Fix variable deferencing before NULL check in the mtk-cci devfreq
driver (Sukrut Bellary)"
* tag 'pm-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (42 commits)
intel_idle: Add a "Long HLT" C1 state for the VM guest mode
cpufreq: intel_pstate: Fix energy_performance_preference for passive
cpufreq: amd-pstate: Add a kernel config option to set default mode
cpufreq: amd-pstate: Set a fallback policy based on preferred_profile
ACPI: CPPC: Add definition for undefined FADT preferred PM profile value
cpufreq: amd-pstate: Set default governor to schedutil
PM: domains: Move the verification of in-params from genpd_add_device()
cpufreq: amd-pstate: Make amd-pstate EPP driver name hyphenated
cpufreq: amd-pstate: Write CPPC enable bit per-socket
intel_idle: Add support for using intel_idle in a VM guest using just hlt
cpufreq: Fail driver register if it has adjust_perf without fast_switch
intel_idle: clean up the (new) state_update_enter_method function
intel_idle: refactor state->enter manipulation into its own function
platform/x86/amd: pmc: Use pm_pr_dbg() for suspend related messages
pinctrl: amd: Use pm_pr_dbg to show debugging messages
ACPI: x86: Add pm_debug_messages for LPS0 _DSM state tracking
include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume
powercap: RAPL: Fix a NULL vs IS_ERR() bug
powercap: RAPL: Fix CONFIG_IOSF_MBI dependency
powercap: RAPL: fix invalid initialization for pl4_supported field
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These rework the handling of notifications in ACPI button drivers (to
enable future simplifications and cleanups), clean up the ACPI thermal
driver, update the ACPI backlight driver, add quirks working around
AML bugs on some systems, fix some assorted issues and clean up code.
Specifics:
- Reduce ACPI device enumeration overhead related to devices with
dependencies (Rafael Wysocki)
- Fix the handling of Microsoft LPS0 _DSM for suspend-to-idle (Mario
Limonciello)
- Fix section mismatch warning in the ACPI suspend-to-idle code (Arnd
Bergmann)
- Drop several ACPI resource management quirks related to IRQ
ovverides on AMD "Zen" systems (Mario Limonciello)
- Modify the ACPI EC driver to make it only clear the EC GPE status
when handling the GPE (Jeremy Compostella)
- Add quirks to work around ACPI tables defects on Lenovo Yoga Book
yb1-x90f/l and Nextbook Ares 8A (Hans de Goede)
- Add ACPi backlight quirks for Dell Studio 1569, Lenovo ThinkPad
X131e (3371 AMD version) and Apple iMac11,3 and stop trying to use
vendor backlight control on relatively recent systems (Hans de
Goede)
- Add pwm_lookup_table entry for second PWM on CHT/BSW devices in the
ACPI LPSS (Intel SoC) driver (Hans de Goede)
- Add nfit_intel_shutdown_status() declaration to a local header to
avoid a "missing prototypes" build warning (Arnd Bergmann)
- Clean up the ACPI thermal driver and drop some dead or otherwise
unneded code from it (Rafael Wysocki)
- Rework the handling of notifications in the ACPI button drivers so
as to allow the common notification handling code for devices to be
simplified (Rafael Wysocki)
- Make ghes_get_devices() return NULL to indicate that there are no
GHES devices so as to allow vendor-specific EDAC drivers to probe
then (Li Yang)
- Mark bert_disable() as __initdata and drop an unused function from
the APEI GHES code (Miaohe Lin)
- Make the ACPI PAD (Processor Aggregator Device) driver realize that
Zhaoxin CPUs support nonstop TSC (Tony W Wang-oc)
- Drop the certainly unnecessary and likely incorrect inclusion of
linux/arm-smccc.h from acpi_ffh.c (Sudeep Holla)"
* tag 'acpi-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (30 commits)
ACPI: video: Add backlight=native DMI quirk for Dell Studio 1569
ACPI: thermal: Drop struct acpi_thermal_flags
ACPI: thermal: Drop struct acpi_thermal_state
ACPI: bus: Simplify installation and removal of notify callback
ACPI: tiny-power-button: Eliminate the driver notify callback
ACPI: button: Use different notify handlers for lid and buttons
ACPI: button: Eliminate the driver notify callback
ACPI: thermal: Eliminate struct acpi_thermal_state_flags
ACPI: thermal: Move acpi_thermal_driver definition
ACPI: thermal: Move symbol definitions to one place
ACPI: thermal: Drop redundant ACPI_TRIPS_REFRESH_DEVICES symbol
ACPI: thermal: Use BIT() macro for defining flags
APEI: GHES: correctly return NULL for ghes_get_devices()
ACPI: FFH: Drop the inclusion of linux/arm-smccc.h
ACPI: PAD: mark Zhaoxin CPUs NONSTOP TSC correctly
ACPI: APEI: mark bert_disable as __initdata
ACPI: EC: Clear GPE on interrupt handling only
ACPI: video: Stop trying to use vendor backlight control on laptops from after ~2012
ACPI: x86: s2idle: Adjust Microsoft LPS0 _DSM handling sequence
ACPI: resource: Remove "Zen" specific match and quirks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"Notable features are user-space support for the memcpy/memset
instructions and the permission indirection extension.
- Support for the Armv8.9 Permission Indirection Extensions. While
this feature doesn't add new functionality, it enables future
support for Guarded Control Stacks (GCS) and Permission Overlays
- User-space support for the Armv8.8 memcpy/memset instructions
- arm64 perf: support the HiSilicon SoC uncore PMU, Arm CMN sysfs
identifier, support for the NXP i.MX9 SoC DDRC PMU, fixes and
cleanups
- Removal of superfluous ISBs on context switch (following
retrospective architecture tightening)
- Decode the ISS2 register during faults for additional information
to help with debugging
- KPTI clean-up/simplification of the trampoline exit code
- Addressing several -Wmissing-prototype warnings
- Kselftest improvements for signal handling and ptrace
- Fix TPIDR2_EL0 restoring on sigreturn
- Clean-up, robustness improvements of the module allocation code
- More sysreg conversions to the automatic register/bitfields
generation
- CPU capabilities handling cleanup
- Arm documentation updates: ACPI, ptdump"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (124 commits)
kselftest/arm64: Add a test case for TPIDR2 restore
arm64/signal: Restore TPIDR2 register rather than memory state
arm64: alternatives: make clean_dcache_range_nopatch() noinstr-safe
Documentation/arm64: Add ptdump documentation
arm64: hibernate: remove WARN_ON in save_processor_state
kselftest/arm64: Log signal code and address for unexpected signals
docs: perf: Fix warning from 'make htmldocs' in hisi-pmu.rst
arm64/fpsimd: Exit streaming mode when flushing tasks
docs: perf: Add new description for HiSilicon UC PMU
drivers/perf: hisi: Add support for HiSilicon UC PMU driver
drivers/perf: hisi: Add support for HiSilicon H60PA and PAv3 PMU driver
perf: arm_cspmu: Add missing MODULE_DEVICE_TABLE
perf/arm-cmn: Add sysfs identifier
perf/arm-cmn: Revamp model detection
perf/arm_dmc620: Add cpumask
arm64: mm: fix VA-range sanity check
arm64/mm: remove now-superfluous ISBs from TTBR writes
Documentation/arm64: Update ACPI tables from BBR
Documentation/arm64: Update references in arm-acpi
Documentation/arm64: Update ARM and arch reference
...
|
|
Pull ARM updates from Russell King:
- lots of build cleanups from Arnd spread throughout the arch/arm tree
- replace strlcpy() with the preferred strscpy()
- use sign_extend32() in the module linker
- drop handle_irq() machine descriptor method
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9315/1: fiq: include asm/mach/irq.h for prototypes
ARM: 9314/1: tcm: move tcm_init() prototype to asm/tcm.h
ARM: 9313/1: vdso: add missing prototypes
ARM: 9312/1: vfp: include asm/neon.h in vfpmodule.c
ARM: 9311/1: decompressor: move function prototypes to misc.h
ARM: 9310/1: xip-kernel: add __inflate_kernel_data prototype
ARM: 9309/1: add missing syscall prototypes
ARM: 9308/1: move setup functions to header
ARM: 9307/1: nommu: include asm/idmap.h
ARM: 9306/1: cacheflush: avoid __flush_anon_page() missing-prototype warning
ARM: 9305/1: add clear/copy_user_highpage declarations
ARM: 9304/1: add prototype for function called only from asm
ARM: 9303/1: kprobes: avoid missing-declaration warnings
ARM: 9302/1: traps: hide unused functions on NOMMU
ARM: 9301/1: dma-mapping: hide unused dma_contiguous_early_fixup function
ARM: 9300/1: Replace all non-returning strlcpy with strscpy
ARM: 9299/1: module: use sign_extend32() to extend the signedness
ARM: 9298/1: Drop custom mdesc->handle_irq()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- miscellaneous NuBus fixes and improvements
- defconfig updates
* tag 'm68k-for-v6.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: defconfig: Update defconfigs for v6.4-rc1
nubus: Don't list slot resources by default
nubus: Remove proc entries before adding them
nubus: Partially revert proc_create_single_data() conversion
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Dave Hansen:
"As usual, these are all over the map. The biggest cluster is work from
Arnd to eliminate -Wmissing-prototype warnings:
- Address -Wmissing-prototype warnings
- Remove repeated 'the' in comments
- Remove unused current_untag_mask()
- Document urgent tip branch timing
- Clean up MSR kernel-doc notation
- Clean up paravirt_ops doc
- Update Srivatsa S. Bhat's maintained areas
- Remove unused extern declaration acpi_copy_wakeup_routine()"
* tag 'x86_cleanups_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86/acpi: Remove unused extern declaration acpi_copy_wakeup_routine()
Documentation: virt: Clean up paravirt_ops doc
x86/mm: Remove unused current_untag_mask()
x86/mm: Remove repeated word in comments
x86/lib/msr: Clean up kernel-doc notation
x86/platform: Avoid missing-prototype warnings for OLPC
x86/mm: Add early_memremap_pgprot_adjust() prototype
x86/usercopy: Include arch_wb_cache_pmem() declaration
x86/vdso: Include vdso/processor.h
x86/mce: Add copy_mc_fragile_handle_tail() prototype
x86/fbdev: Include asm/fb.h as needed
x86/hibernate: Declare global functions in suspend.h
x86/entry: Add do_SYSENTER_32() prototype
x86/quirks: Include linux/pnp.h for arch_pnpbios_disabled()
x86/mm: Include asm/numa.h for set_highmem_pages_init()
x86: Avoid missing-prototype warnings for doublefault code
x86/fpu: Include asm/fpu/regset.h
x86: Add dummy prototype for mk_early_pgtbl_32()
x86/pci: Mark local functions as 'static'
x86/ftrace: Move prepare_ftrace_return prototype to header
...
|
|
For a newly mounted file system, the journal committing thread always
record new transactions from the start of the journal area, no matter
whether the journal was clean or just has been recovered. So the logdump
code in debugfs cannot dump continuous logs between each mount, it is
disadvantageous to analysis corrupted file system image and locate the
file system inconsistency bugs.
If we get a corrupted file system in the running products and want to
find out what has happened, besides lookup the system log, one effective
way is to backtrack the journal log. But we may not always run e2fsck
before each mount and the default fsck -a mode also cannot always
checkout all inconsistencies, so it could left over some inconsistencies
into the next mount until we detect it. Finally, transactions in the
journal may probably discontinuous and some relatively new transactions
has been covered, it becomes hard to analyse. If we could record
transactions continuously between each mount, we could acquire more
useful info from the journal. Like this:
|Previous mount checkpointed/recovered logs|Current mount logs |
|{------}{---}{--------} ... {------}| ... |{======}{========}...000000|
And yes the journal area is limited and cannot record everything, the
problematic transaction may also be covered even if we do this, but
this is still useful for fuzzy tests and short-running products.
This patch save the head blocknr in the superblock after flushing the
journal or unmounting the file system, let the next mount could continue
to record new transaction behind it. This change is backward compatible
because the old kernel does not care about the head blocknr of the
journal. It is also fine if we mount a clean old image without valid
head blocknr, we fail back to set it to s_first just like before.
Finally, for the case of mount an unclean file system, we could also get
the journal head easily after scanning/replaying the journal, it will
continue to record new transaction after the recovered transactions.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230322013353.1843306-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
journal->j_format_version is no longer used, remove it.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230315013128.3911115-7-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
We should only check and set extented features if journal format version
is 2, and now we check the in memory copy of the superblock
'journal->j_format_version', which relys on the parameter initialization
sequence, switch to use the h_blocktype in superblock cloud be more
clear.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230315013128.3911115-5-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
JBD2_HAS_[IN|RO_]COMPAT_FEATURE macros are no longer used, just remove
them.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230315013128.3911115-4-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
mballoc criterias have historically been called by numbers
like CR0, CR1... however this makes it confusing to understand
what each criteria is about.
Change these criterias from numbers to symbolic names and add
relevant comments. While we are at it, also reformat and add some
comments to ext4_seq_mb_stats_show() for better readability.
Additionally, define CR_FAST which signifies the criteria
below which we can make quicker decisions like:
* quitting early if (free block < requested len)
* avoiding to scan free extents smaller than required len.
* avoiding to initialize buddy cache and work with existing cache
* limiting prefetches
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/a2dc6ec5aea5e5e68cf8e788c2a964ffead9c8b0.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
CR1_5 aims to optimize allocations which can't be satisfied in CR1. The
fact that we couldn't find a group in CR1 suggests that it would be
difficult to find a continuous extent to compleltely satisfy our
allocations. So before falling to the slower CR2, in CR1.5 we
proactively trim the the preallocations so we can find a group with
(free / fragments) big enough. This speeds up our allocation at the
cost of slightly reduced preallocation.
The patch also adds a new sysfs tunable:
* /sys/fs/ext4/<partition>/mb_cr1_5_max_trim_order
This controls how much CR1.5 can trim a request before falling to CR2.
For example, for a request of order 7 and max trim order 2, CR1.5 can
trim this upto order 5.
Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/150fdf65c8e4cc4dba71e020ce0859bcf636a5ff.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Convert criteria to be an enum so it easier to maintain and
update the tracefiles to use enum names. This change also makes
it easier to insert new criterias in the future.
There is no functional change in this patch.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/5d82fd467bdf70ea45bdaef810af3b146013946c.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 confidential computing update from Borislav Petkov:
- Add support for unaccepted memory as specified in the UEFI spec v2.9.
The gist of it all is that Intel TDX and AMD SEV-SNP confidential
computing guests define the notion of accepting memory before using
it and thus preventing a whole set of attacks against such guests
like memory replay and the like.
There are a couple of strategies of how memory should be accepted -
the current implementation does an on-demand way of accepting.
* tag 'x86_cc_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
virt: sevguest: Add CONFIG_CRYPTO dependency
x86/efi: Safely enable unaccepted memory in UEFI
x86/sev: Add SNP-specific unaccepted memory support
x86/sev: Use large PSC requests if applicable
x86/sev: Allow for use of the early boot GHCB for PSC requests
x86/sev: Put PSC struct on the stack in prep for unaccepted memory support
x86/sev: Fix calculation of end address based on number of pages
x86/tdx: Add unaccepted memory support
x86/tdx: Refactor try_accept_one()
x86/tdx: Make _tdx_hypercall() and __tdx_module_call() available in boot stub
efi/unaccepted: Avoid load_unaligned_zeropad() stepping into unaccepted memory
efi: Add unaccepted memory support
x86/boot/compressed: Handle unaccepted memory
efi/libstub: Implement support for unaccepted memory
efi/x86: Get full memory map in allocate_e820()
mm: Add support for unaccepted memory
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Add initial support for RAS hardware found on AMD server GPUs (MI200).
Those GPUs and CPUs are connected together through the coherent
fabric and the GPU memory controllers report errors through x86's MCA
so EDAC needs to support them. The amd64_edac driver supports now HBM
(High Bandwidth Memory) and thus such heterogeneous memory controller
systems
- Other small cleanups and improvements
* tag 'ras_core_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
EDAC/amd64: Cache and use GPU node map
EDAC/amd64: Add support for AMD heterogeneous Family 19h Model 30h-3Fh
EDAC/amd64: Document heterogeneous system enumeration
x86/MCE/AMD, EDAC/mce_amd: Decode UMC_V2 ECC errors
x86/amd_nb: Re-sort and re-indent PCI defines
x86/amd_nb: Add MI200 PCI IDs
ras/debugfs: Fix error checking for debugfs_create_dir()
x86/MCE: Check a hw error's address to determine proper recovery action
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Time, timekeeping and related device driver updates:
Core:
- A set of fixes, cleanups and enhancements to the posix timer code:
- Prevent another possible live lock scenario in the exit() path,
which affects POSIX_CPU_TIMERS_TASK_WORK enabled architectures.
- Fix a loop termination issue which was reported syzcaller/KSAN
in the posix timer ID allocation code.
That triggered a deeper look into the posix-timer code which
unearthed more small issues.
- Add missing READ/WRITE_ONCE() annotations
- Fix or remove completely outdated comments
- Document places which are subtle and completely undocumented.
- Add missing hrtimer modes to the trace event decoder
- Small cleanups and enhancements all over the place
Drivers:
- Rework the Hyper-V clocksource and sched clock setup code
- Remove a deprecated clocksource driver
- Small fixes and enhancements all over the place"
* tag 'timers-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
clocksource/drivers/cadence-ttc: Fix memory leak in ttc_timer_probe
dt-bindings: timers: Add Ralink SoCs timer
clocksource/drivers/hyper-v: Rework clocksource and sched clock setup
dt-bindings: timer: brcm,kona-timer: convert to YAML
clocksource/drivers/imx-gpt: Fold <soc/imx/timer.h> into its only user
clk: imx: Drop inclusion of unused header <soc/imx/timer.h>
hrtimer: Add missing sparse annotations to hrtimer locking
clocksource/drivers/imx-gpt: Use only a single name for functions
clocksource/drivers/loongson1: Move PWM timer to clocksource framework
dt-bindings: timer: Add Loongson-1 clocksource
MIPS: Loongson32: Remove deprecated PWM timer clocksource
clocksource/drivers/ingenic-timer: Use pm_sleep_ptr() macro
tracing/timer: Add missing hrtimer modes to decode_hrtimer_mode().
posix-timers: Add sys_ni_posix_timers() prototype
tick/rcu: Fix bogus ratelimit condition
alarmtimer: Remove unnecessary (void *) cast
alarmtimer: Remove unnecessary initialization of variable 'ret'
posix-timers: Refer properly to CONFIG_HIGH_RES_TIMERS
posix-timers: Polish coding style in a few places
posix-timers: Remove pointless comments
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP updates from Thomas Gleixner:
"A large update for SMP management:
- Parallel CPU bringup
The reason why people are interested in parallel bringup is to
shorten the (kexec) reboot time of cloud servers to reduce the
downtime of the VM tenants.
The current fully serialized bringup does the following per AP:
1) Prepare callbacks (allocate, intialize, create threads)
2) Kick the AP alive (e.g. INIT/SIPI on x86)
3) Wait for the AP to report alive state
4) Let the AP continue through the atomic bringup
5) Let the AP run the threaded bringup to full online state
There are two significant delays:
#3 The time for an AP to report alive state in start_secondary()
on x86 has been measured in the range between 350us and 3.5ms
depending on vendor and CPU type, BIOS microcode size etc.
#4 The atomic bringup does the microcode update. This has been
measured to take up to ~8ms on the primary threads depending
on the microcode patch size to apply.
On a two socket SKL server with 56 cores (112 threads) the boot CPU
spends on current mainline about 800ms busy waiting for the APs to
come up and apply microcode. That's more than 80% of the actual
onlining procedure.
This can be reduced significantly by splitting the bringup
mechanism into two parts:
1) Run the prepare callbacks and kick the AP alive for each AP
which needs to be brought up.
The APs wake up, do their firmware initialization and run the
low level kernel startup code including microcode loading in
parallel up to the first synchronization point. (#1 and #2
above)
2) Run the rest of the bringup code strictly serialized per CPU
(#3 - #5 above) as it's done today.
Parallelizing that stage of the CPU bringup might be possible
in theory, but it's questionable whether required surgery
would be justified for a pretty small gain.
If the system is large enough the first AP is already waiting at
the first synchronization point when the boot CPU finished the
wake-up of the last AP. That reduces the AP bringup time on that
SKL from ~800ms to ~80ms, i.e. by a factor ~10x.
The actual gain varies wildly depending on the system, CPU,
microcode patch size and other factors. There are some
opportunities to reduce the overhead further, but that needs some
deep surgery in the x86 CPU bringup code.
For now this is only enabled on x86, but the core functionality
obviously works for all SMP capable architectures.
- Enhancements for SMP function call tracing so it is possible to
locate the scheduling and the actual execution points. That allows
to measure IPI delivery time precisely"
* tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
trace,smp: Add tracepoints for scheduling remotelly called functions
trace,smp: Add tracepoints around remotelly called functions
MAINTAINERS: Add CPU HOTPLUG entry
x86/smpboot: Fix the parallel bringup decision
x86/realmode: Make stack lock work in trampoline_compat()
x86/smp: Initialize cpu_primary_thread_mask late
cpu/hotplug: Fix off by one in cpuhp_bringup_mask()
x86/apic: Fix use of X{,2}APIC_ENABLE in asm with older binutils
x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it
x86/smpboot: Support parallel startup of secondary CPUs
x86/smpboot: Implement a bit spinlock to protect the realmode stack
x86/apic: Save the APIC virtual base address
cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE
x86/apic: Provide cpu_primary_thread mask
x86/smpboot: Enable split CPU startup
cpu/hotplug: Provide a split up CPUHP_BRINGUP mechanism
cpu/hotplug: Reset task stack state in _cpu_up()
cpu/hotplug: Remove unused state functions
riscv: Switch to hotplug core state synchronization
parisc: Switch to hotplug core state synchronization
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Thomas Gleixner:
"Initialize FPU late.
Right now FPU is initialized very early during boot. There is no real
requirement to do so. The only requirement is to have it done before
alternatives are patched.
That's done in check_bugs() which does way more than what the function
name suggests.
So first rename check_bugs() to arch_cpu_finalize_init() which makes
it clear what this is about.
Move the invocation of arch_cpu_finalize_init() earlier in
start_kernel() as it has to be done before fork_init() which needs to
know the FPU register buffer size.
With those prerequisites the FPU initialization can be moved into
arch_cpu_finalize_init(), which removes it from the early and fragile
part of the x86 bringup"
* tag 'x86-boot-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mem_encrypt: Unbreak the AMD_MEM_ENCRYPT=n build
x86/fpu: Move FPU initialization into arch_cpu_finalize_init()
x86/fpu: Mark init functions __init
x86/fpu: Remove cpuinfo argument from init functions
x86/init: Initialize signal frame size late
init, x86: Move mem_encrypt_init() into arch_cpu_finalize_init()
init: Invoke arch_cpu_finalize_init() earlier
init: Remove check_bugs() leftovers
um/cpu: Switch to arch_cpu_finalize_init()
sparc/cpu: Switch to arch_cpu_finalize_init()
sh/cpu: Switch to arch_cpu_finalize_init()
mips/cpu: Switch to arch_cpu_finalize_init()
m68k/cpu: Switch to arch_cpu_finalize_init()
loongarch/cpu: Switch to arch_cpu_finalize_init()
ia64/cpu: Switch to arch_cpu_finalize_init()
ARM: cpu: Switch to arch_cpu_finalize_init()
x86/cpu: Switch to arch_cpu_finalize_init()
init: Provide arch_cpu_finalize_init()
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core:
- Convert the interrupt descriptor storage to a maple tree to
overcome the limitations of the radixtree + fixed size bitmap.
This allows us to handle very large servers with a huge number of
guests without imposing a huge memory overhead on everyone
- Implement optional retriggering of interrupts which utilize the
fasteoi handler to work around a GICv3 architecture issue
Drivers:
- A set of fixes and updates for the Loongson/Loongarch related
drivers
- Workaound for an ASR8601 integration hickup which ends up with CPU
numbering which can't be represented in the GIC implementation
- The usual set of boring fixes and updates all over the place"
* tag 'irq-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
Revert "irqchip/mxs: Include linux/irqchip/mxs.h"
irqchip/jcore-aic: Fix missing allocation of IRQ descriptors
irqchip/stm32-exti: Fix warning on initialized field overwritten
irqchip/stm32-exti: Add STM32MP15xx IWDG2 EXTI to GIC map
irqchip/gicv3: Add a iort_pmsi_get_dev_id() prototype
irqchip/mxs: Include linux/irqchip/mxs.h
irqchip/clps711x: Remove unused clps711x_intc_init() function
irqchip/mmp: Remove non-DT codepath
irqchip/ftintc010: Mark all function static
irqdomain: Include internals.h for function prototypes
irqchip/loongson-eiointc: Add DT init support
dt-bindings: interrupt-controller: Add Loongson EIOINTC
irqchip/loongson-eiointc: Fix irq affinity setting during resume
irqchip/loongson-liointc: Add IRQCHIP_SKIP_SET_WAKE flag
irqchip/loongson-liointc: Fix IRQ trigger polarity
irqchip/loongson-pch-pic: Fix potential incorrect hwirq assignment
irqchip/loongson-pch-pic: Fix initialization of HT vector register
irqchip/gic-v3-its: Enable RESEND_WHEN_IN_PROGRESS for LPIs
genirq: Allow fasteoi handler to resend interrupts on concurrent handling
genirq: Expand doc for PENDING and REPLAY flags
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
1) Allow slightly larger IPVS connection table size from Kconfig for
64-bit arch, from Abhijeet Rastogi.
2) Since IPVS connection table might be larger than 2^20 after previous
patch, allow to limit it depending on the available memory.
Moreover, use kvmalloc. From Julian Anastasov.
3) Do not rebuild VLAN header in nft_payload when matching source and
destination MAC address.
4) Remove nested rcu read lock side in ip_set_test(), from Florian Westphal.
5) Allow to update set size, also from Florian.
6) Improve NAT tuple selection when connection is closing,
from Florian Westphal.
7) Support for resetting set element stateful expression, from Phil Sutter.
8) Use NLA_POLICY_MAX to narrow down maximum attribute value in nf_tables,
from Florian Westphal.
* tag 'nf-next-23-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: limit allowed range via nla_policy
netfilter: nf_tables: Introduce NFT_MSG_GETSETELEM_RESET
netfilter: snat: evict closing tcp entries on reply tuple collision
netfilter: nf_tables: permit update of set size
netfilter: ipset: remove rcu_read_lock_bh pair from ip_set_test
netfilter: nft_payload: rebuild vlan header when needed
ipvs: dynamically limit the connection hash table
ipvs: increase ip_vs_conn_tab_bits range for 64BIT
====================
Link: https://lore.kernel.org/r/20230626064749.75525-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Various cleanups all around (Irvin, Chaitanya, Christophe)
- Better struct packing (Christophe JAILLET)
- Reduce controller error logs for optional commands (Keith)
- Support for >=64KiB block sizes (Daniel Gomez)
- Fabrics fixes and code organization (Max, Chaitanya, Daniel
Wagner)
- bcache updates via Coly:
- Fix a race at init time (Mingzhe Zou)
- Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye)
- use page pinning in the block layer for dio (David)
- convert old block dio code to page pinning (David, Christoph)
- cleanups for pktcdvd (Andy)
- cleanups for rnbd (Guoqing)
- use the unchecked __bio_add_page() for the initial single page
additions (Johannes)
- fix overflows in the Amiga partition handling code (Michael)
- improve mq-deadline zoned device support (Bart)
- keep passthrough requests out of the IO schedulers (Christoph, Ming)
- improve support for flush requests, making them less special to deal
with (Christoph)
- add bdev holder ops and shutdown methods (Christoph)
- fix the name_to_dev_t() situation and use cases (Christoph)
- decouple the block open flags from fmode_t (Christoph)
- ublk updates and cleanups, including adding user copy support (Ming)
- BFQ sanity checking (Bart)
- convert brd from radix to xarray (Pankaj)
- constify various structures (Thomas, Ivan)
- more fine grained persistent reservation ioctl capability checks
(Jingbo)
- misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan,
Jordy, Li, Min, Yu, Zhong, Waiman)
* tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits)
scsi/sg: don't grab scsi host module reference
ext4: Fix warning in blkdev_put()
block: don't return -EINVAL for not found names in devt_from_devname
cdrom: Fix spectre-v1 gadget
block: Improve kernel-doc headers
blk-mq: don't insert passthrough request into sw queue
bsg: make bsg_class a static const structure
ublk: make ublk_chr_class a static const structure
aoe: make aoe_class a static const structure
block/rnbd: make all 'class' structures const
block: fix the exclusive open mask in disk_scan_partitions
block: add overflow checks for Amiga partition support
block: change all __u32 annotations to __be32 in affs_hardblocks.h
block: fix signed int overflow in Amiga partition support
block: add capacity validation in bdev_add_partition()
block: fine-granular CAP_SYS_ADMIN for Persistent Reservation
block: disallow Persistent Reservation on partitions
reiserfs: fix blkdev_put() warning from release_journal_dev()
block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()
block: document the holder argument to blkdev_get_by_path
...
|
|
Pull io_uring updates from Jens Axboe:
"Nothing major in this release, just a bunch of cleanups and some
optimizations around networking mostly.
- clean up file request flags handling (Christoph)
- clean up request freeing and CQ locking (Pavel)
- support for using pre-registering the io_uring fd at setup time
(Josh)
- Add support for user allocated ring memory, rather than having the
kernel allocate it. Mostly for packing rings into a huge page (me)
- avoid an unnecessary double retry on receive (me)
- maintain ordering for task_work, which also improves performance
(me)
- misc cleanups/fixes (Pavel, me)"
* tag 'for-6.5/io_uring-2023-06-23' of git://git.kernel.dk/linux: (39 commits)
io_uring: merge conditional unlock flush helpers
io_uring: make io_cq_unlock_post static
io_uring: inline __io_cq_unlock
io_uring: fix acquire/release annotations
io_uring: kill io_cq_unlock()
io_uring: remove IOU_F_TWQ_FORCE_NORMAL
io_uring: don't batch task put on reqs free
io_uring: move io_clean_op()
io_uring: inline io_dismantle_req()
io_uring: remove io_free_req_tw
io_uring: open code io_put_req_find_next
io_uring: add helpers to decode the fixed file file_ptr
io_uring: use io_file_from_index in io_msg_grab_file
io_uring: use io_file_from_index in __io_sync_cancel
io_uring: return REQ_F_ flags from io_file_get_flags
io_uring: remove io_req_ffs_set
io_uring: remove a confusing comment above io_file_get_flags
io_uring: remove the mode variable in io_file_get_flags
io_uring: remove __io_file_supports_nowait
io_uring: wait interruptibly for request completions on exit
...
|
|
Pull splice updates from Jens Axboe:
"This kills off ITER_PIPE to avoid a race between truncate,
iov_iter_revert() on the pipe and an as-yet incomplete DMA to a bio
with unpinned/unref'ed pages from an O_DIRECT splice read. This causes
memory corruption.
Instead, we either use (a) filemap_splice_read(), which invokes the
buffered file reading code and splices from the pagecache into the
pipe; (b) copy_splice_read(), which bulk-allocates a buffer, reads
into it and then pushes the filled pages into the pipe; or (c) handle
it in filesystem-specific code.
Summary:
- Rename direct_splice_read() to copy_splice_read()
- Simplify the calculations for the number of pages to be reclaimed
in copy_splice_read()
- Turn do_splice_to() into a helper, vfs_splice_read(), so that it
can be used by overlayfs and coda to perform the checks on the
lower fs
- Make vfs_splice_read() jump to copy_splice_read() to handle
direct-I/O and DAX
- Provide shmem with its own splice_read to handle non-existent pages
in the pagecache. We don't want a ->read_folio() as we don't want
to populate holes, but filemap_get_pages() requires it
- Provide overlayfs with its own splice_read to call down to a lower
layer as overlayfs doesn't provide ->read_folio()
- Provide coda with its own splice_read to call down to a lower layer
as coda doesn't provide ->read_folio()
- Direct ->splice_read to copy_splice_read() in tty, procfs, kernfs
and random files as they just copy to the output buffer and don't
splice pages
- Provide wrappers for afs, ceph, ecryptfs, ext4, f2fs, nfs, ntfs3,
ocfs2, orangefs, xfs and zonefs to do locking and/or revalidation
- Make cifs use filemap_splice_read()
- Replace pointers to generic_file_splice_read() with pointers to
filemap_splice_read() as DIO and DAX are handled in the caller;
filesystems can still provide their own alternate ->splice_read()
op
- Remove generic_file_splice_read()
- Remove ITER_PIPE and its paraphernalia as generic_file_splice_read
was the only user"
* tag 'for-6.5/splice-2023-06-23' of git://git.kernel.dk/linux: (31 commits)
splice: kdoc for filemap_splice_read() and copy_splice_read()
iov_iter: Kill ITER_PIPE
splice: Remove generic_file_splice_read()
splice: Use filemap_splice_read() instead of generic_file_splice_read()
cifs: Use filemap_splice_read()
trace: Convert trace/seq to use copy_splice_read()
zonefs: Provide a splice-read wrapper
xfs: Provide a splice-read wrapper
orangefs: Provide a splice-read wrapper
ocfs2: Provide a splice-read wrapper
ntfs3: Provide a splice-read wrapper
nfs: Provide a splice-read wrapper
f2fs: Provide a splice-read wrapper
ext4: Provide a splice-read wrapper
ecryptfs: Provide a splice-read wrapper
ceph: Provide a splice-read wrapper
afs: Provide a splice-read wrapper
9p: Add splice_read wrapper
net: Make sock_splice_read() use copy_splice_read() by default
tty, proc, kernfs, random: Use copy_splice_read()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Mainly core changes, refactoring and optimizations.
Performance is improved in some areas, overall there may be a
cumulative improvement due to refactoring that removed lookups in the
IO path or simplified IO submission tracking.
Core:
- submit IO synchronously for fast checksums (crc32c and xxhash),
remove high priority worker kthread
- read extent buffer in one go, simplify IO tracking, bio submission
and locking
- remove additional tracking of redirtied extent buffers, originally
added for zoned mode but actually not needed
- track ordered extent pointer in bio to avoid rbtree lookups during
IO
- scrub, use recovered data stripes as cache to avoid unnecessary
read
- in zoned mode, optimize logical to physical mappings of extents
- remove PageError handling, not set by VFS nor writeback
- cleanups, refactoring, better structure packing
- lots of error handling improvements
- more assertions, lockdep annotations
- print assertion failure with the exact line where it happens
- tracepoint updates
- more debugging prints
Performance:
- speedup in fsync(), better tracking of inode logged status can
avoid transaction commit
- IO path structures track logical offsets in data structures and
does not need to look it up
User visible changes:
- don't commit transaction for every created subvolume, this can
reduce time when many subvolumes are created in a batch
- print affected files when relocation fails
- trigger orphan file cleanup during START_SYNC ioctl
Notable fixes:
- fix crash when disabling quota and relocation
- fix crashes when removing roots from drity list
- fix transacion abort during relocation when converting from newer
profiles not covered by fallback
- in zoned mode, stop reclaiming block groups if filesystem becomes
read-only
- fix rare race condition in tree mod log rewind that can miss some
btree node slots
- with enabled fsverity, drop up-to-date page bit in case the
verification fails"
* tag 'for-6.5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (194 commits)
btrfs: fix race between quota disable and relocation
btrfs: add comment to struct btrfs_fs_info::dirty_cowonly_roots
btrfs: fix race when deleting free space root from the dirty cow roots list
btrfs: fix race when deleting quota root from the dirty cow roots list
btrfs: tracepoints: also show actual number of the outstanding extents
btrfs: update i_version in update_dev_time
btrfs: make btrfs_compressed_bioset static
btrfs: add handling for RAID1C23/DUP to btrfs_reduce_alloc_profile
btrfs: scrub: remove btrfs_fs_info::scrub_wr_completion_workers
btrfs: scrub: remove scrub_ctx::csum_list member
btrfs: do not BUG_ON after failure to migrate space during truncation
btrfs: do not BUG_ON on failure to get dir index for new snapshot
btrfs: send: do not BUG_ON() on unexpected symlink data extent
btrfs: do not BUG_ON() when dropping inode items from log root
btrfs: replace BUG_ON() at split_item() with proper error handling
btrfs: do not BUG_ON() on tree mod log failures at btrfs_del_ptr()
btrfs: do not BUG_ON() on tree mod log failures at insert_ptr()
btrfs: do not BUG_ON() on tree mod log failure at insert_new_root()
btrfs: do not BUG_ON() on tree mod log failures at push_nodes_for_insert()
btrfs: abort transaction at update_ref_for_cow() when ref count is zero
...
|
|
Pull fsverity updates from Eric Biggers:
"Several updates for fs/verity/:
- Do all hashing with the shash API instead of with the ahash API.
This simplifies the code and reduces API overhead. It should also
make things slightly easier for XFS's upcoming support for
fsverity. It does drop fsverity's support for off-CPU hash
accelerators, but that support was incomplete and not known to be
used
- Update and export fsverity_get_digest() so that it's ready for
overlayfs's upcoming support for fsverity checking of lowerdata
- Improve the documentation for builtin signature support
- Fix a bug in the large folio support"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: improve documentation for builtin signature support
fsverity: rework fsverity_get_digest() again
fsverity: simplify error handling in verify_data_block()
fsverity: don't use bio_first_page_all() in fsverity_verify_bio()
fsverity: constify fsverity_hash_alg
fsverity: use shash API instead of ahash API
|
|
Pull nfsd updates from Chuck Lever:
- Clean-ups in the READ path in anticipation of MSG_SPLICE_PAGES
- Better NUMA awareness when allocating pages and other objects
- A number of minor clean-ups to XDR encoding
- Elimination of a race when accepting a TCP socket
- Numerous observability enhancements
* tag 'nfsd-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (46 commits)
nfsd: remove redundant assignments to variable len
svcrdma: Fix stale comment
NFSD: Distinguish per-net namespace initialization
nfsd: move init of percpu reply_cache_stats counters back to nfsd_init_net
SUNRPC: Address RCU warning in net/sunrpc/svc.c
SUNRPC: Use sysfs_emit in place of strlcpy/sprintf
SUNRPC: Remove transport class dprintk call sites
SUNRPC: Fix comments for transport class registration
svcrdma: Remove an unused argument from __svc_rdma_put_rw_ctxt()
svcrdma: trace cc_release calls
svcrdma: Convert "might sleep" comment into a code annotation
NFSD: Add an nfsd4_encode_nfstime4() helper
SUNRPC: Move initialization of rq_stime
SUNRPC: Optimize page release in svc_rdma_sendto()
svcrdma: Prevent page release when nothing was received
svcrdma: Revert 2a1e4f21d841 ("svcrdma: Normalize Send page handling")
SUNRPC: Revert 579900670ac7 ("svcrdma: Remove unused sc_pages field")
SUNRPC: Revert cc93ce9529a6 ("svcrdma: Retain the page backing rq_res.head[0].iov_base")
NFSD: add encoding of op_recall flag for write delegation
NFSD: Add "official" reviewers for this subsystem
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
"This contains the work to extend move_mount() to allow adding a mount
beneath the topmost mount of a mount stack.
There are two LWN articles about this. One covers the original patch
series in [1]. The other in [2] summarizes the session and roughly the
discussion between Al and me at LSFMM. The second article also goes
into some good questions from attendees.
Since all details are found in the relevant commit with a technical
dive into semantics and locking at the end I'm only adding the
motivation and core functionality for this from commit message and
leave out the invasive details. The code is also heavily commented and
annotated as well which was explicitly requested.
TL;DR:
> mount -t ext4 /dev/sda /mnt
|
└─/mnt /dev/sda ext4
> mount --beneath -t xfs /dev/sdb /mnt
|
└─/mnt /dev/sdb xfs
└─/mnt /dev/sda ext4
> umount /mnt
|
└─/mnt /dev/sdb xfs
The longer motivation is that various distributions are adding or are
in the process of adding support for system extensions and in the
future configuration extensions through various tools. A more detailed
explanation on system and configuration extensions can be found on the
manpage which is listed below at [3].
System extension images may – dynamically at runtime — extend the
/usr/ and /opt/ directory hierarchies with additional files. This is
particularly useful on immutable system images where a /usr/ and/or
/opt/ hierarchy residing on a read-only file system shall be extended
temporarily at runtime without making any persistent modifications.
When one or more system extension images are activated, their /usr/
and /opt/ hierarchies are combined via overlayfs with the same
hierarchies of the host OS, and the host /usr/ and /opt/ overmounted
with it ("merging"). When they are deactivated, the mount point is
disassembled — again revealing the unmodified original host version of
the hierarchy ("unmerging"). Merging thus makes the extension's
resources suddenly appear below the /usr/ and /opt/ hierarchies as if
they were included in the base OS image itself. Unmerging makes them
disappear again, leaving in place only the files that were shipped
with the base OS image itself.
System configuration images are similar but operate on directories
containing system or service configuration.
On nearly all modern distributions mount propagation plays a crucial
role and the rootfs of the OS is a shared mount in a peer group
(usually with peer group id 1):
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/ / ext4 shared:1 29 1
On such systems all services and containers run in a separate mount
namespace and are pivot_root()ed into their rootfs. A separate mount
namespace is almost always used as it is the minimal isolation
mechanism services have. But usually they are even much more isolated
up to the point where they almost become indistinguishable from
containers.
Mount propagation again plays a crucial role here. The rootfs of all
these services is a slave mount to the peer group of the host rootfs.
This is done so the service will receive mount propagation events from
the host when certain files or directories are updated.
In addition, the rootfs of each service, container, and sandbox is
also a shared mount in its separate peer group:
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/ / ext4 shared:24 master:1 71 47
For people not too familiar with mount propagation, the master:1 means
that this is a slave mount to peer group 1. Which as one can see is
the host rootfs as indicated by shared:1 above. The shared:24
indicates that the service rootfs is a shared mount in a separate peer
group with peer group id 24.
A service may run other services. Such nested services will also have
a rootfs mount that is a slave to the peer group of the outer service
rootfs mount.
For containers things are just slighly different. A container's rootfs
isn't a slave to the service's or host rootfs' peer group. The rootfs
mount of a container is simply a shared mount in its own peer group:
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/home/ubuntu/debian-tree / ext4 shared:99 61 60
So whereas services are isolated OS components a container is treated
like a separate world and mount propagation into it is restricted to a
single well known mount that is a slave to the peer group of the
shared mount /run on the host:
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/propagate/debian-tree /run/host/incoming tmpfs master:5 71 68
Here, the master:5 indicates that this mount is a slave to the peer
group with peer group id 5. This allows to propagate mounts into the
container and served as a workaround for not being able to insert
mounts into mount namespaces directly. But the new mount api does
support inserting mounts directly. For the interested reader the
blogpost in [4] might be worth reading where I explain the old and the
new approach to inserting mounts into mount namespaces.
Containers of course, can themselves be run as services. They often
run full systems themselves which means they again run services and
containers with the exact same propagation settings explained above.
The whole system is designed so that it can be easily updated,
including all services in various fine-grained ways without having to
enter every single service's mount namespace which would be
prohibitively expensive. The mount propagation layout has been
carefully chosen so it is possible to propagate updates for system
extensions and configurations from the host into all services.
The simplest model to update the whole system is to mount on top of
/usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc
will then propagate into every service. This works cleanly the first
time. However, when the system is updated multiple times it becomes
necessary to unmount the first update on /opt, /usr, /etc and then
propagate the new update. But this means, there's an interval where
the old base system is accessible. This has to be avoided to protect
against downgrade attacks.
The vfs already exposes a mechanism to userspace whereby mounts can be
mounted beneath an existing mount. Such mounts are internally referred
to as "tucked". The patch series exposes the ability to mount beneath
a top mount through the new MOVE_MOUNT_BENEATH flag for the
move_mount() system call. This allows userspace to seamlessly upgrade
mounts. After this series the only thing that will have changed is
that mounting beneath an existing mount can be done explicitly instead
of just implicitly.
The crux is that the proposed mechanism already exists and that it is
so powerful as to cover cases where mounts are supposed to be updated
with new versions. Crucially, it offers an important flexibility.
Namely that updates to a system may either be forced or can be delayed
and the umount of the top mount be left to a service if it is a
cooperative one"
Link: https://lwn.net/Articles/927491 [1]
Link: https://lwn.net/Articles/934094 [2]
Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [3]
Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [4]
Link: https://github.com/flatcar/sysext-bakery
Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1
Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2
Link: https://github.com/systemd/systemd/pull/26013
* tag 'v6.5/vfs.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: allow to mount beneath top mount
fs: use a for loop when locking a mount
fs: properly document __lookup_mnt()
fs: add path_mounted()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs file handling updates from Christian Brauner:
"This contains Amir's work to fix a long-standing problem where an
unprivileged overlayfs mount can be used to avoid fanotify permission
events that were requested for an inode or superblock on the
underlying filesystem.
Some background about files opened in overlayfs. If a file is opened
in overlayfs @file->f_path will refer to a "fake" path. What this
means is that while @file->f_inode will refer to inode of the
underlying layer, @file->f_path refers to an overlayfs
{dentry,vfsmount} pair. The reasons for doing this are out of scope
here but it is the reason why the vfs has been providing the
open_with_fake_path() helper for overlayfs for very long time now. So
nothing new here.
This is for sure not very elegant and everyone including the overlayfs
maintainers agree. Improving this significantly would involve more
fragile and potentially rather invasive changes.
In various codepaths access to the path of the underlying filesystem
is needed for such hybrid file. The best example is fsnotify where
this becomes security relevant. Passing the overlayfs
@file->f_path->dentry will cause fsnotify to skip generating fsnotify
events registered on the underlying inode or superblock.
To fix this we extend the vfs provided open_with_fake_path() concept
for overlayfs to create a backing file container that holds the real
path and to expose a helper that can be used by relevant callers to
get access to the path of the underlying filesystem through the new
file_real_path() helper. This pattern is similar to what we do in
d_real() and d_real_inode().
The first beneficiary is fsnotify and fixes the security sensitive
problem mentioned above.
There's a couple of nice cleanups included as well.
Over time, the old open_with_fake_path() helper added specifically for
overlayfs a long time ago started to get used in other places such as
cachefiles. Even though cachefiles have nothing to do with hybrid
files.
The only reason cachefiles used that concept was that files opened
with open_with_fake_path() aren't charged against the caller's open
file limit by raising FMODE_NOACCOUNT. It's just mere coincidence that
both overlayfs and cachefiles need to ensure to not overcharge the
caller for their internal open calls.
So this work disentangles FMODE_NOACCOUNT use cases and backing file
use-cases by adding the FMODE_BACKING flag which indicates that the
file can be used to retrieve the backing file of another filesystem.
(Fyi, Jens will be sending you a really nice cleanup from Christoph
that gets rid of 3 FMODE_* flags otherwise this would be the last
fmode_t bit we'd be using.)
So now overlayfs becomes the sole user of the renamed
open_with_fake_path() helper which is now named backing_file_open().
For internal kernel users such as cachefiles that are only interested
in FMODE_NOACCOUNT but not in FMODE_BACKING we add a new
kernel_file_open() helper which opens a file without being charged
against the caller's open file limit. All new helpers are properly
documented and clearly annotated to mention their special uses.
We also rename vfs_tmpfile_open() to kernel_tmpfile_open() to clearly
distinguish it from vfs_tmpfile() and align it the other kernel_*()
internal helpers"
* tag 'v6.5/vfs.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ovl: enable fsnotify events on underlying real files
fs: use backing_file container for internal files with "fake" f_path
fs: move kmem_cache_zalloc() into alloc_empty_file*() helpers
fs: use a helper for opening kernel internal files
fs: rename {vfs,kernel}_tmpfile_open()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Miscellaneous features, cleanups, and fixes for vfs and individual fs
Features:
- Use mode 0600 for file created by cachefilesd so it can be run by
unprivileged users. This aligns them with directories which are
already created with mode 0700 by cachefilesd
- Reorder a few members in struct file to prevent some false sharing
scenarios
- Indicate that an eventfd is used a semaphore in the eventfd's
fdinfo procfs file
- Add a missing uapi header for eventfd exposing relevant uapi
defines
- Let the VFS protect transitions of a superblock from read-only to
read-write in addition to the protection it already provides for
transitions from read-write to read-only. Protecting read-only to
read-write transitions allows filesystems such as ext4 to perform
internal writes, keeping writers away until the transition is
completed
Cleanups:
- Arnd removed the architecture specific arch_report_meminfo()
prototypes and added a generic one into procfs.h. Note, we got a
report about a warning in amdpgpu codepaths that suggested this was
bisectable to this change but we concluded it was a false positive
- Remove unused parameters from split_fs_names()
- Rename put_and_unmap_page() to unmap_and_put_page() to let the name
reflect the order of the cleanup operation that has to unmap before
the actual put
- Unexport buffer_check_dirty_writeback() as it is not used outside
of block device aops
- Stop allocating aio rings from highmem
- Protecting read-{only,write} transitions in the VFS used open-coded
barriers in various places. Replace them with proper little helpers
and document both the helpers and all barrier interactions involved
when transitioning between read-{only,write} states
- Use flexible array members in old readdir codepaths
Fixes:
- Use the correct type __poll_t for epoll and eventfd
- Replace all deprecated strlcpy() invocations, whose return value
isn't checked with an equivalent strscpy() call
- Fix some kernel-doc warnings in fs/open.c
- Reduce the stack usage in jffs2's xattr codepaths finally getting
rid of this: fs/jffs2/xattr.c:887:1: error: the frame size of 1088
bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
royally annoying compilation warning
- Use __FMODE_NONOTIFY instead of FMODE_NONOTIFY where an int and not
fmode_t is required to avoid fmode_t to integer degradation
warnings
- Create coredumps with O_WRONLY instead of O_RDWR. There's a long
explanation in that commit how O_RDWR is actually a bug which we
found out with the help of Linus and git archeology
- Fix "no previous prototype" warnings in the pipe codepaths
- Add overflow calculations for remap_verify_area() as a signed
addition overflow could be triggered in xfstests
- Fix a null pointer dereference in sysv
- Use an unsigned variable for length calculations in jfs avoiding
compilation warnings with gcc 13
- Fix a dangling pipe pointer in the watch queue codepath
- The legacy mount option parser provided as a fallback by the VFS
for filesystems not yet converted to the new mount api did prefix
the generated mount option string with a leading ',' causing issues
for some filesystems
- Fix a repeated word in a comment in fs.h
- autofs: Update the ctime when mtime is updated as mandated by
POSIX"
* tag 'v6.5/vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (27 commits)
readdir: Replace one-element arrays with flexible-array members
fs: Provide helpers for manipulating sb->s_readonly_remount
fs: Protect reconfiguration of sb read-write from racing writes
eventfd: add a uapi header for eventfd userspace APIs
autofs: set ctime as well when mtime changes on a dir
eventfd: show the EFD_SEMAPHORE flag in fdinfo
fs/aio: Stop allocating aio rings from HIGHMEM
fs: Fix comment typo
fs: unexport buffer_check_dirty_writeback
fs: avoid empty option when generating legacy mount string
watch_queue: prevent dangling pipe pointer
fs.h: Optimize file struct to prevent false sharing
highmem: Rename put_and_unmap_page() to unmap_and_put_page()
cachefiles: Allow the cache to be non-root
init: remove unused names parameter in split_fs_names()
jfs: Use unsigned variable for length calculations
fs/sysv: Null check to prevent null-ptr-deref bug
fs: use UB-safe check for signed addition overflow in remap_verify_area
procfs: consolidate arch_report_meminfo declaration
fs: pipe: reveal missing function protoypes
...
|
|
Merge power capping updates for 6.5-rc1:
- Introduce power capping core support for Intel TPMI (Topology Aware
Register and PM Capsule Interface) and a TPMI interface driver for
Intel RAPL (Zhang Rui, Dan Carpenter).
- Fix CONFIG_IOSF_MBI dependency in the Intel RAPL power capping
driver (Zhang Rui).
- Fix invalid initialization for pl4_supported field in the Intel RAPL
power capping driver (Sumeet Pawnikar).
* powercap:
powercap: RAPL: Fix a NULL vs IS_ERR() bug
powercap: RAPL: Fix CONFIG_IOSF_MBI dependency
powercap: RAPL: fix invalid initialization for pl4_supported field
powercap: intel_rapl: Introduce RAPL TPMI interface driver
powercap: intel_rapl: Introduce core support for TPMI interface
powercap: intel_rapl: Introduce RAPL I/F type
powercap: intel_rapl: Make cpu optional for rapl_package
powercap: intel_rapl: Remove redundant cpu parameter
powercap: intel_rapl: Add support for lock bit per Power Limit
powercap: intel_rapl: Cleanup Power Limits support
powercap: intel_rapl: Use bitmap for Power Limits
powercap: intel_rapl: Change primitive order
powercap: intel_rapl: Use index to initialize primitive information
powercap: intel_rapl: Support per domain energy/power/time unit
powercap: intel_rapl: Support per Interface primitive information
powercap: intel_rapl: Support per Interface rapl_defaults
powercap: intel_rapl: Allow probing without CPUID match
powercap: intel_rapl: Remove unused field in struct rapl_if_priv
|
|
'clk-ti' and 'clk-kasprintf' into clk-next
- Handle allocation failures from kasprintf() and friends
* clk-imx:
clk: imx: clk-imx8mp: improve error handling in imx8mp_clocks_probe()
clk: imx93: fix memory leak and missing unwind goto in imx93_clocks_probe
clk: imx: clk-imx8mn: fix memory leak in imx8mn_clocks_probe
dt-bindings: clock: imx8m: Add missing interrupt property
clk: imx: clk-imxrt1050: fix memory leak in imxrt1050_clocks_probe
clk: imx: composite-8m: Add imx8m_divider_determine_rate
clk: imx: scu: use _safe list iterator to avoid a use after free
clk: imx: drop imx_unregister_clocks
clk: imx6ul: retain early UART clocks during kernel init
clk: imx: imx6sx: Remove CLK_SET_RATE_PARENT from the LDB clocks
* clk-microchip:
dt-bindings: clocks: at91sam9x5-sckc: convert to yaml
dt-bindings: clocks: atmel,at91rm9200-pmc: convert to yaml
clk: microchip: Use of_property_read_bool() for boolean properties
clk: microchip: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE
* clk-cleanup:
clk: fix typo in clk_hw_register_fixed_rate_parent_data() macro
clk: Fix memory leak in devm_clk_notifier_register()
clk: mvebu: Iterate over possible CPUs instead of DT CPU nodes
clk: mvebu: Use of_get_cpu_hwid() to read CPU ID
MAINTAINERS: Add Marvell mvebu clock drivers
clk: mvebu: Use of_address_to_resource()
clk: tegra: tegra124-emc: Fix potential memory leak
clk: clocking-wizard: Fix Oops in clk_wzrd_register_divider()
clk: bcm: rpi: Fix off by one in raspberrypi_discover_clocks()
clk: sifive: Use devm_platform_ioremap_resource()
* clk-bindings:
dt-bindings: clock: drop unneeded quotes and use absolute /schemas path
dt-bindings: rcc: stm32: Sync with u-boot copy for STM32MP13 SoC
* clk-ti:
clk: keystone: syscon-clk: Add support for audio refclk
dt-bindings: clock: Add binding documentation for TI Audio REFCLK
dt-bindings: clock: ehrpwm: Remove unneeded syscon compatible
clk: keystone: syscon-clk: Allow the clock node to not be of type syscon
* clk-kasprintf:
clk: clocking-wizard: check return value of devm_kasprintf()
clk: ti: clkctrl: check return value of kasprintf()
clk: keystone: sci-clk: check return value of kasprintf()
clk: si5341: free unused memory on probe failure
clk: si5341: check return value of {devm_}kasprintf()
clk: si5341: return error if one synth clock registration fails
clk: cdce925: check return value of kasprintf()
clk: vc5: check memory returned by kasprintf()
|
|
'clk-samsung' and 'clk-amlogic' into clk-next
- Make clk_ops::determine_rate mandatory for muxes
* clk-renesas:
clk: renesas: rzg2l: Convert to readl_poll_timeout_atomic()
clk: renesas: mstp: Convert to readl_poll_timeout_atomic()
clk: renesas: cpg-mssr: Convert to readl_poll_timeout_atomic()
iopoll: Do not use timekeeping in read_poll_timeout_atomic()
iopoll: Call cpu_relax() in busy loops
clk: renesas: rzg2l: Fix CPG_SIPLL5_CLK1 register write
clk: renesas: r8a779a0: Add PWM clock
* clk-determine-rate: (71 commits)
clk: sprd: composite: Simplify determine_rate implementation
ASoC: tlv320aic32x4: pll: Remove impossible condition in clk_aic32x4_pll_determine_rate()
clk: Fix best_parent_rate after moving code into a separate function
clk: Forbid to register a mux without determine_rate
ASoC: tlv320aic32x4: div: Switch to determine_rate
ASoC: tlv320aic32x4: pll: Switch to determine_rate
clk: tegra: super: Switch to determine_rate
clk: tegra: periph: Switch to determine_rate
clk: stm32: composite: Switch to determine_rate
clk: st: flexgen: Switch to determine_rate
clk: sprd: composite: Switch to determine_rate
clk: ingenic: tcu: Switch to determine_rate
clk: ingenic: cgu: Switch to determine_rate
clk: imx: scu: Switch to determine_rate
clk: da8xx: clk48: Switch to determine_rate
clk: si5351: clkout: Switch to determine_rate
clk: si5351: msynth: Switch to determine_rate
clk: si5351: pll: Switch to determine_rate
clk: si5341: Switch to determine_rate
clk: cdce706: clkout: Switch to determine_rate
...
* clk-allwinner:
clk: sunxi-ng: a64: force select PLL_MIPI in TCON0 mux
* clk-samsung:
clk: samsung: add CONFIG_OF dependency
clk: samsung: Re-add support for Exynos4212 CPU clock
clk: samsung: Add Exynos4212 compatible to CLKOUT driver
dt-bindings: clock: samsung,exynos: add Exynos4212 clock compatible
* clk-amlogic:
MAINTAINERS: repair pattern in ARM/Amlogic Meson SoC CLOCK FRAMEWORK
clk: meson: pll: remove unneeded semicolon
clk: meson: a1: Staticize rtc clk
clk: meson: a1: add Amlogic A1 Peripherals clock controller driver
clk: meson: a1: add Amlogic A1 PLL clock controller driver
clk: meson: introduce new pll power-on sequence for A1 SoC family
clk: meson: make pll rst bit as optional
dt-bindings: clock: meson: add A1 Peripherals clock controller bindings
dt-bindings: clock: meson: add A1 PLL clock controller bindings
|
|
Merge updates related to system-wide power management and generic power
domains (genpd) updates for 6.5-rc1:
- Fix the handling of pm_suspend_target_state when CONFIG_PM is unset
(Kai-Heng Feng).
- Correct spelling mistake in a comment in the hibernation code (Wang
Honghui).
- Add arch_resume_nosmt() prototype to avoid a "missing prototypes"
build warning (Arnd Bergmann).
- Restrict pm_pr_dbg() to system-wide power transitions and use it in
a few additional places (Mario Limonciello).
- Drop verification of in-params from genpd_add_device() and ensure
that all of its callers will do it (Ulf Hansson).
- Prevent possible integer overflows from occurring in
genpd_parse_state() (Nikita Zhandarovich).
* pm-sleep:
platform/x86/amd: pmc: Use pm_pr_dbg() for suspend related messages
pinctrl: amd: Use pm_pr_dbg to show debugging messages
ACPI: x86: Add pm_debug_messages for LPS0 _DSM state tracking
include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume
PM: suspend: add a arch_resume_nosmt() prototype
PM: hibernate: Correct spelling mistake in a comment
PM: suspend: Fix pm_suspend_target_state handling for !CONFIG_PM
* pm-domains:
PM: domains: Move the verification of in-params from genpd_add_device()
PM: domains: fix integer overflow issues in genpd_parse_state()
|
|
Merge cpufreq and cpuidle updates for 6.5-rc1:
- Prevent cpufreq drivers that provide the ->adjust_perf() callback
without a ->fast_switch() one which is used as a fallback from the
former in some cases (Wyes Karny).
- Fix some issues related to the AMD P-state cpufreq driver (Mario
Limonciello, Wyes Karny).
- Fix the energy_performance_preference attribute handling in the
intel_pstate driver in passive mode (Tero Kristo).
- Clean up the intel_idle driver, make it work with VM guests that
cannot use the MWAIT instruction and address the case in which the
host may enter a deep idle state when the guest is idle (Arjan van
de Ven).
* pm-cpufreq:
cpufreq: intel_pstate: Fix energy_performance_preference for passive
cpufreq: amd-pstate: Add a kernel config option to set default mode
cpufreq: amd-pstate: Set a fallback policy based on preferred_profile
ACPI: CPPC: Add definition for undefined FADT preferred PM profile value
cpufreq: amd-pstate: Set default governor to schedutil
cpufreq: amd-pstate: Make amd-pstate EPP driver name hyphenated
cpufreq: amd-pstate: Write CPPC enable bit per-socket
cpufreq: Fail driver register if it has adjust_perf without fast_switch
* pm-cpuidle:
intel_idle: Add a "Long HLT" C1 state for the VM guest mode
intel_idle: Add support for using intel_idle in a VM guest using just hlt
intel_idle: clean up the (new) state_update_enter_method function
intel_idle: refactor state->enter manipulation into its own function
|
|
Merge ACPI device enumeration changes, ACPI power management update,
ACPI resources management updates and an EC driver update for 6.5-rc1:
- Reduce ACPI device enumeration overhead related to devices with
dependencies (Rafael Wysocki).
- Fix the handling of Microsoft LPS0 _DSM for suspend-to-idle (Mario
Limonciello).
- Fix section mismatch warning in the ACPI suspend-to-idle code (Arnd
Bergmann).
- Drop several ACPI resource management quirks related to IRQ ovverides
on AMD "Zen" systems (Mario Limonciello).
- Modify the ACPI EC driver to make it only clear the EC GPE status
when handling the GPE (Jeremy Compostella).
* acpi-scan:
ACPI: scan: Reduce overhead related to devices with dependencies
* acpi-pm:
ACPI: x86: s2idle: Adjust Microsoft LPS0 _DSM handling sequence
ACPI: PM: s2idle: fix section mismatch warning
* acpi-resource:
ACPI: resource: Remove "Zen" specific match and quirks
* acpi-ec:
ACPI: EC: Clear GPE on interrupt handling only
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.5
A fairly quiet release from a core and framework point of view, but a
very big one from the point of view of new drivers:
- More refectoring from Morimoto-san, this time mainly around DAI
links and how we control the ordering of trigger() callbacks.
- Convert a lot of drivers to use maple tree based caches.
- Lots of work on the x86 driver stack.
- Compressed audio support for Qualcomm.
- Support for AMD SoundWire, Analog Devices SSM3515, Google Chameleon,
Ingenic X1000, Intel systems with various CODECs, Longsoon platforms,
Maxim MAX98388, Mediatek MT8188, Nuvoton NAU8825C, NXP platforms with
NAU8822, Qualcomm WSA884x, StarFive JH7110, Texas Instruments TAS2781.
|
|
Pull the 6.5-devel branch for upstreaming.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
kernel-doc does not support DECLARE_PER_CPU(), so don't mark it with
kernel-doc notation.
One comment block is not kernel-doc notation, so just use
"/*" to begin the comment.
Quietens these warnings:
netfilter.h:493: warning: Function parameter or member 'bool' not described in 'DECLARE_PER_CPU'
netfilter.h:493: warning: Function parameter or member 'nf_skb_duplicated' not described in 'DECLARE_PER_CPU'
netfilter.h:493: warning: expecting prototype for nf_skb_duplicated(). Prototype was for DECLARE_PER_CPU() instead
netfilter.h:496: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Contains bitmask of ctnetlink event subscribers, if any.
Fixes: e7c8899f3e6f ("netfilter: move tee_active to core")
Fixes: fdf6491193e4 ("netfilter: ctnetlink: make event listener tracking global")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- A number of Loogson/Loogarch fixes
- Allow the core code to retrigger an interrupt that has
fired while the same interrupt is being handled on another
CPU, papering over a GICv3 architecture issue
- Work around an integration problem on ASR8601, where the CPU
numbering isn't representable in the GIC implementation...
- Add some missing interrupt to the STM32 irqchip
- A bunch of warning squashing triggered by W=1 builds
Link: https://lore.kernel.org/r/20230623224345.3577134-1-maz@kernel.org
|
|
Analogous to NFT_MSG_GETOBJ_RESET, but for set elements with a timeout
or attached stateful expressions like counters or quotas - reset them
all at once. Respect a per element timeout value if present to reset the
'expires' value to.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Now that set->nelems is always updated permit update of the sets max size.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
These function are all called from assembler files, or from inline
assembler, so there is no immediate need for a prototype in a header,
but if -Wmissing-prototypes is enabled, the compiler warns about them:
arch/x86/xen/efi.c:130:13: error: no previous prototype for 'xen_efi_init' [-Werror=missing-prototypes]
arch/x86/platform/pvh/enlighten.c:120:13: error: no previous prototype for 'xen_prepare_pvh' [-Werror=missing-prototypes]
arch/x86/xen/enlighten_pv.c:1233:34: error: no previous prototype for 'xen_start_kernel' [-Werror=missing-prototypes]
arch/x86/xen/irq.c:22:14: error: no previous prototype for 'xen_force_evtchn_callback' [-Werror=missing-prototypes]
arch/x86/entry/common.c:302:24: error: no previous prototype for 'xen_pv_evtchn_do_upcall' [-Werror=missing-prototypes]
Declare all of them in an appropriate header file to avoid the warnings.
For consistency, also move the asm_cpu_bringup_and_idle() declaration
out of smp_pv.c.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20230614073501.10101-3-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
To facilitate diskless iSCSI boot, the firmware can place a table of
configuration details in memory called the iBFT. The presence of this
table is not specified, nor is the precise location (and it's not in the
E820) so the kernel has to search for a magic marker to find it.
When running under Xen, Dom 0 does not have access to the entire host's
memory, only certain regions which are identity-mapped which means that
the pseudo-physical address in Dom0 == real host physical address.
Add the iBFT search bounds as a reserved region which causes it to be
identity-mapped in xen_set_identity_and_remap_chunk() which allows Dom0
access to the specific physical memory to correctly search for the iBFT
magic marker (and later access the full table).
This necessitates moving the call to reserve_ibft_region() somewhat
later so that it is called after e820__memory_setup() which is when the
Xen identity mapping adjustments are applied. The precise location of
the call is not too important so I've put it alongside dmi_setup() which
does similar scanning of memory for configuration tables.
Finally in the iBFT find code, instead of using isa_bus_to_virt() which
doesn't do the right thing under Xen, use early_memremap() like the
dmi_setup() code does.
The result of these changes is that it is possible to boot a diskless
Xen + Dom0 running off an iSCSI disk whereas previously it would fail to
find the iBFT and consequently, the iSCSI root disk.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Konrad Rzeszutek Wilk <konrad@darnok.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> # for x86
Link: https://lore.kernel.org/r/20230605102840.1521549-1-ross.lagerwall@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
The xen_debug_interrupt() function is only called on x86, which has a
prototype in an architecture specific header, but the definition also
exists on others, where the lack of a prototype causes a W=1 warning:
drivers/xen/events/events_2l.c:264:13: error: no previous prototype for 'xen_debug_interrupt' [-Werror=missing-prototypes]
Move the prototype into a global header instead to avoid this warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20230517124525.929201-1-arnd@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Drop the __weak attribute from a function prototype as it otherwise
leads to the function getting replaced by a dummy stub
- Fix the umask value setup of the frontend event as former is
different on two Intel cores
* tag 'perf_urgent_for_v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix the FRONTEND encoding on GNR and MTL
perf/core: Drop __weak attribute from arch_perf_update_userpage() prototype
|