summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2012-07-31fs: Improve filesystem freezing handlingJan Kara1-7/+143
vfs_check_frozen() tests are racy since the filesystem can be frozen just after the test is performed. Thus in write paths we can end up marking some pages or inodes dirty even though the file system is already frozen. This creates problems with flusher thread hanging on frozen filesystem. Another problem is that exclusion between ->page_mkwrite() and filesystem freezing has been handled by setting page dirty and then verifying s_frozen. This guaranteed that either the freezing code sees the faulted page, writes it, and writeprotects it again or we see s_frozen set and bail out of page fault. This works to protect from page being marked writeable while filesystem freezing is running but has an unpleasant artefact of leaving dirty (although unmodified and writeprotected) pages on frozen filesystem resulting in similar problems with flusher thread as the first problem. This patch aims at providing exclusion between write paths and filesystem freezing. We implement a writer-freeze read-write semaphore in the superblock. Actually, there are three such semaphores because of lock ranking reasons - one for page fault handlers (->page_mkwrite), one for all other writers, and one of internal filesystem purposes (used e.g. to track running transactions). Write paths which should block freezing (e.g. directory operations, ->aio_write(), ->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem takes the writer side. Only that we don't really want to bounce cachelines of the semaphores between CPUs for each write happening. So we implement the reader side of the semaphore as a per-cpu counter and the writer side is implemented using s_writers.frozen superblock field. [AV: microoptimize sb_start_write(); we want it fast in normal case] BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-31nfsd: Push mnt_want_write() outside of i_mutexJan Kara1-0/+1
When mnt_want_write() starts to handle freezing it will get a full lock semantics requiring proper lock ordering. So push mnt_want_write() call consistently outside of i_mutex. CC: linux-nfs@vger.kernel.org CC: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-31mm: Make default vm_ops provide ->page_mkwrite handlerJan Kara1-0/+1
Make default vm_ops provide ->page_mkwrite handler. Currently it only updates file's modification times and gets locked page but later it will also handle filesystem freezing. BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-29fs: add link restriction audit reportingKees Cook1-0/+4
Adds audit messages for unexpected link restriction violations so that system owners will have some sort of potentially actionable information about misbehaving processes. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-29fs: add link restrictionsKees Cook1-0/+2
This adds symlink and hardlink restrictions to the Linux VFS. Symlinks: A long-standing class of security issues is the symlink-based time-of-check-time-of-use race, most commonly seen in world-writable directories like /tmp. The common method of exploitation of this flaw is to cross privilege boundaries when following a given symlink (i.e. a root process follows a symlink belonging to another user). For a likely incomplete list of hundreds of examples across the years, please see: http://cve.mitre.org/cgi-bin/cvekey.cgi?keyword=/tmp The solution is to permit symlinks to only be followed when outside a sticky world-writable directory, or when the uid of the symlink and follower match, or when the directory owner matches the symlink's owner. Some pointers to the history of earlier discussion that I could find: 1996 Aug, Zygo Blaxell http://marc.info/?l=bugtraq&m=87602167419830&w=2 1996 Oct, Andrew Tridgell http://lkml.indiana.edu/hypermail/linux/kernel/9610.2/0086.html 1997 Dec, Albert D Cahalan http://lkml.org/lkml/1997/12/16/4 2005 Feb, Lorenzo Hernández García-Hierro http://lkml.indiana.edu/hypermail/linux/kernel/0502.0/1896.html 2010 May, Kees Cook https://lkml.org/lkml/2010/5/30/144 Past objections and rebuttals could be summarized as: - Violates POSIX. - POSIX didn't consider this situation and it's not useful to follow a broken specification at the cost of security. - Might break unknown applications that use this feature. - Applications that break because of the change are easy to spot and fix. Applications that are vulnerable to symlink ToCToU by not having the change aren't. Additionally, no applications have yet been found that rely on this behavior. - Applications should just use mkstemp() or O_CREATE|O_EXCL. - True, but applications are not perfect, and new software is written all the time that makes these mistakes; blocking this flaw at the kernel is a single solution to the entire class of vulnerability. - This should live in the core VFS. - This should live in an LSM. (https://lkml.org/lkml/2010/5/31/135) - This should live in an LSM. - This should live in the core VFS. (https://lkml.org/lkml/2010/8/2/188) Hardlinks: On systems that have user-writable directories on the same partition as system files, a long-standing class of security issues is the hardlink-based time-of-check-time-of-use race, most commonly seen in world-writable directories like /tmp. The common method of exploitation of this flaw is to cross privilege boundaries when following a given hardlink (i.e. a root process follows a hardlink created by another user). Additionally, an issue exists where users can "pin" a potentially vulnerable setuid/setgid file so that an administrator will not actually upgrade a system fully. The solution is to permit hardlinks to only be created when the user is already the existing file's owner, or if they already have read/write access to the existing file. Many Linux users are surprised when they learn they can link to files they have no access to, so this change appears to follow the doctrine of "least surprise". Additionally, this change does not violate POSIX, which states "the implementation may require that the calling process has permission to access the existing file"[1]. This change is known to break some implementations of the "at" daemon, though the version used by Fedora and Ubuntu has been fixed[2] for a while. Otherwise, the change has been undisruptive while in use in Ubuntu for the last 1.5 years. [1] http://pubs.opengroup.org/onlinepubs/9699919799/functions/linkat.html [2] http://anonscm.debian.org/gitweb/?p=collab-maint/at.git;a=commitdiff;h=f4114656c3a6c6f6070e315ffdf940a49eda3279 This patch is based on the patches in Openwall and grsecurity, along with suggestions from Al Viro. I have added a sysctl to enable the protected behavior, and documentation. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-29consolidate pipe file creationAl Viro2-3/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-29new helper: done_path_create()Al Viro1-0/+1
releases what needs to be released after {kern,user}_path_create() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-23switch dentry_open() to struct path, make it grab references itselfAl Viro1-2/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-23vfs: allow custom EOF in generic_file_llseek codeEric Sandeen1-1/+1
For ext3/4 htree directories, using the vfs llseek function with SEEK_END goes to i_size like for any other file, but in reality we want the maximum possible hash value. Recent changes in ext4 have cut & pasted generic_file_llseek() back into fs/ext4/dir.c, but replicating this core code seems like a bad idea, especially since the copy has already diverged from the vfs. This patch updates generic_file_llseek_size to accept both a custom maximum offset, and a custom EOF position. With this in place, ext4_dir_llseek can pass in the appropriate maximum hash position for both maxsize and eof, and get what it wants. As far as I know, this does not fix any bugs - nfs in the kernel doesn't use SEEK_END, and I don't know of any user who does. But some ext4 folks seem keen on doing the right thing here, and I can't really argue. (Patch also fixes up some comments slightly) Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-22vfs: Create function for iterating over block devicesJan Kara1-0/+5
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-22quota: Split dquot_quota_sync() to writeback and cache flushing partJan Kara2-2/+8
Split off part of dquot_quota_sync() which writes dquots into a quota file to a separate function. In the next patch we will use the function from filesystems and we do not want to abuse ->quota_sync quotactl callback more than necessary. Acked-by: Steven Whitehouse <swhiteho@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-22get rid of ->scm_work_listAl Viro2-2/+0
recursion in __scm_destroy() will be cut by delaying final fput() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-22switch fput to task_work_addAl Viro1-0/+3
... and schedule_work() for interrupt/kernel_thread callers (and yes, now it *is* OK to call from interrupt). We are guaranteed that __fput() will be done before we return to userland (or exit). Note that for fput() from a kernel thread we get an async behaviour; it's almost always OK, but sometimes you might need to have __fput() completed before you do anything else. There are two mechanisms for that - a general barrier (flush_delayed_fput()) and explicit __fput_sync(). Both should be used with care (as was the case for fput() from kernel threads all along). See comments in fs/file_table.c for details. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-22merge task_work and rcu_head, get rid of separate allocation for keyring caseAl Viro3-15/+10
task_work and rcu_head are identical now; merge them (calling the result struct callback_head, rcu_head #define'd to it), kill separate allocation in security/keys since we can just use cred->rcu now. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-22trim task_work: get rid of hlistAl Viro3-4/+4
layout based on Oleg's suggestion; single-linked list, task->task_works points to the last element, forward pointer from said last element points to head. I'd still prefer much more regular scheme with two pointers in task_work, but... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-22trimming task_work: kill ->dataAl Viro1-3/+1
get rid of the only user of ->data; this is _not_ the final variant - in the end we'll have task_work and rcu_head identical and just use cred->rcu, at which point the separate allocation will be gone completely. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14VFS: Pass mount flags to sget()David Howells1-1/+1
Pass mount flags to sget() so that it can use them in initialising a new superblock before the set function is called. They could also be passed to the compare function. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14fs: add nd_jump_linkChristoph Hellwig1-0/+2
Add a helper that abstracts out the jump to an already parsed struct path from ->follow_link operation from procfs. Not only does this clean up the code by moving the two sides of this game into a single helper, but it also prepares for making struct nameidata private to namei.c Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14get rid of kern_path_parent()Al Viro1-1/+1
all callers want the same thing, actually - a kinda-sorta analog of kern_path_create(). I.e. they want parent vfsmount/dentry (with ->i_mutex held, to make sure the child dentry is still their child) + the child dentry. Signed-off-by Al Viro <viro@zeniv.linux.org.uk>
2012-07-14don't pass nameidata * to vfs_create()Al Viro1-1/+1
all we want is a boolean flag, same as the method gets now Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14don't pass nameidata to ->create()Al Viro1-1/+1
boolean "does it have to be exclusive?" flag is passed instead; Local filesystem should just ignore it - the object is guaranteed not to be there yet. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14stop passing nameidata to ->lookup()Al Viro1-2/+2
Just the flags; only NFS cares even about that, but there are legitimate uses for such argument. And getting rid of that completely would require splitting ->lookup() into a couple of methods (at least), so let's leave that alone for now... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14stop passing nameidata * to ->d_revalidate()Al Viro1-1/+1
Just the lookup flags. Die, bastard, die... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14make finish_no_open() return intAl Viro1-1/+1
namely, 1 ;-) That's what we want to return from ->atomic_open() instances after finish_no_open(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14kill struct opendataAl Viro1-6/+5
Just pass struct file *. Methods are happier that way... There's no need to return struct file * from finish_open() now, so let it return int. Next: saner prototypes for parts in namei.c Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14make ->atomic_open() return intAl Viro1-3/+3
Change of calling conventions: old new NULL 1 file 0 ERR_PTR(-ve) -ve Caller *knows* that struct file *; no need to return it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14->atomic_open() prototype change - pass int * instead of bool *Al Viro1-2/+7
... and let finish_open() report having opened the file via that sucker. Next step: don't modify od->filp at all. [AV: FILE_CREATE was already used by cifs; Miklos' fix folded] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14vfs: remove open intents from nameidataMiklos Szeredi1-14/+0
All users of open intents have been converted to use ->atomic_{open,create}. This patch gets rid of nd->intent.open and related infrastructure. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14nfs: clean up ->create in nfs_rpc_opsMiklos Szeredi1-1/+1
Don't pass nfs_open_context() to ->create(). Only the NFS4 implementation needed that and only because it wanted to return an open file using open intents. That task has been replaced by ->atomic_open so it is not necessary anymore to pass the context to the create rpc operation. Despite nfs4_proc_create apparently being okay with a NULL context it Oopses somewhere down the call chain. So allocate a context here. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14vfs: add i_op->atomic_open()Miklos Szeredi1-0/+7
Add a new inode operation which is called on the last component of an open. Using this the filesystem can look up, possibly create and open the file in one atomic operation. If it cannot perform this (e.g. the file type turned out to be wrong) it may signal this by returning NULL instead of an open struct file pointer. i_op->atomic_open() is only called if the last component is negative or needs lookup. Handling cached positive dentries here doesn't add much value: these can be opened using f_op->open(). If the cached file turns out to be invalid, the open can be retried, this time using ->atomic_open() with a fresh dentry. For now leave the old way of using open intents in lookup and revalidate in place. This will be removed once all the users are converted. David Howells noticed that if ->atomic_open() opens the file but does not create it, handle_truncate() will be called on it even if it is not a regular file. Fix this by checking the file type in this case too. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14vfs: switch i_dentry/d_alias to hlistAl Viro2-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull the leap second fixes from Thomas Gleixner: "It's a rather large series, but well discussed, refined and reviewed. It got a massive testing by John, Prarit and tip. In theory we could split it into two parts. The first two patches f55a6faa3843: hrtimer: Provide clock_was_set_delayed() 4873fa070ae8: timekeeping: Fix leapsecond triggered load spike issue are merely preventing the stuff loops forever issues, which people have observed. But there is no point in delaying the other 4 commits which achieve full correctness into 3.6 as they are tagged for stable anyway. And I rather prefer to have the full fixes merged in bulk than a "prevent the observable wreckage and deal with the hidden fallout later" approach." * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hrtimer: Update hrtimer base offsets each hrtimer_interrupt timekeeping: Provide hrtimer update function hrtimers: Move lock held region in hrtimer_interrupt() timekeeping: Maintain ktime_t based offsets for hrtimers timekeeping: Fix leapsecond triggered load spike issue hrtimer: Provide clock_was_set_delayed()
2012-07-12Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds3-4/+7
Merge random patches from Andrew Morton. * Merge emailed patches from Andrew Morton <akpm@linux-foundation.org>: (32 commits) memblock: free allocated memblock_reserved_regions later mm: sparse: fix usemap allocation above node descriptor section mm: sparse: fix section usemap placement calculation xtensa: fix incorrect memset shmem: cleanup shmem_add_to_page_cache shmem: fix negative rss in memcg memory.stat tmpfs: revert SEEK_DATA and SEEK_HOLE drivers/rtc/rtc-twl.c: fix threaded IRQ to use IRQF_ONESHOT fat: fix non-atomic NFS i_pos read MAINTAINERS: add OMAP CPUfreq driver to OMAP Power Management section sgi-xp: nested calls to spin_lock_irqsave() fs: ramfs: file-nommu: add SetPageUptodate() drivers/rtc/rtc-mxc.c: fix irq enabled interrupts warning mm/memory_hotplug.c: release memory resources if hotadd_new_pgdat() fails h8300/uaccess: add mising __clear_user() h8300/uaccess: remove assignment to __gu_val in unhandled case of get_user() h8300/time: add missing #include <asm/irq_regs.h> h8300/signal: fix typo "statis" h8300/pgtable: add missing #include <asm-generic/pgtable.h> drivers/rtc/rtc-ab8500.c: ensure correct probing of the AB8500 RTC when Device Tree is enabled ...
2012-07-12memblock: free allocated memblock_reserved_regions laterYinghai Lu1-3/+1
memblock_free_reserved_regions() calls memblock_free(), but memblock_free() would double reserved.regions too, so we could free the old range for reserved.regions. Also tj said there is another bug which could be related to this. | I don't think we're saving any noticeable | amount by doing this "free - give it to page allocator - reserve | again" dancing. We should just allocate regions aligned to page | boundaries and free them later when memblock is no longer in use. in that case, when DEBUG_PAGEALLOC, will get panic: memblock_free: [0x0000102febc080-0x0000102febf080] memblock_free_reserved_regions+0x37/0x39 BUG: unable to handle kernel paging request at ffff88102febd948 IP: [<ffffffff836a5774>] __next_free_mem_range+0x9b/0x155 PGD 4826063 PUD cf67a067 PMD cf7fa067 PTE 800000102febd160 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC CPU 0 Pid: 0, comm: swapper Not tainted 3.5.0-rc2-next-20120614-sasha #447 RIP: 0010:[<ffffffff836a5774>] [<ffffffff836a5774>] __next_free_mem_range+0x9b/0x155 See the discussion at https://lkml.org/lkml/2012/6/13/469 So try to allocate with PAGE_SIZE alignment and free it later. Reported-by: Sasha Levin <levinsasha928@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-12mm: sparse: fix usemap allocation above node descriptor sectionYinghai Lu1-0/+5
After commit f5bf18fa22f8 ("bootmem/sparsemem: remove limit constraint in alloc_bootmem_section"), usemap allocations may easily be placed outside the optimal section that holds the node descriptor, even if there is space available in that section. This results in unnecessary hotplug dependencies that need to have the node unplugged before the section holding the usemap. The reason is that the bootmem allocator doesn't guarantee a linear search starting from the passed allocation goal but may start out at a much higher address absent an upper limit. Fix this by trying the allocation with the limit at the section end, then retry without if that fails. This keeps the fix from f5bf18fa22f8 of not panicking if the allocation does not fit in the section, but still makes sure to try to stay within the section at first. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> [3.3.x, 3.4.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-12memory hotplug: fix invalid memory access caused by stale kswapd pointerJiang Liu1-1/+1
kswapd_stop() is called to destroy the kswapd work thread when all memory of a NUMA node has been offlined. But kswapd_stop() only terminates the work thread without resetting NODE_DATA(nid)->kswapd to NULL. The stale pointer will prevent kswapd_run() from creating a new work thread when adding memory to the memory-less NUMA node again. Eventually the stale pointer may cause invalid memory access. An example stack dump as below. It's reproduced with 2.6.32, but latest kernel has the same issue. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81051a94>] exit_creds+0x12/0x78 PGD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/system/memory/memory391/state CPU 11 Modules linked in: cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq microcode fuse loop dm_mod tpm_tis rtc_cmos i2c_i801 rtc_core tpm serio_raw pcspkr sg tpm_bios igb i2c_core iTCO_wdt rtc_lib mptctl iTCO_vendor_support button dca bnx2 usbhid hid uhci_hcd ehci_hcd usbcore sd_mod crc_t10dif edd ext3 mbcache jbd fan ide_pci_generic ide_core ata_generic ata_piix libata thermal processor thermal_sys hwmon mptsas mptscsih mptbase scsi_transport_sas scsi_mod Pid: 7949, comm: sh Not tainted 2.6.32.12-qiuxishi-5-default #92 Tecal RH2285 RIP: 0010:exit_creds+0x12/0x78 RSP: 0018:ffff8806044f1d78 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff880604f22140 RCX: 0000000000019502 RDX: 0000000000000000 RSI: 0000000000000202 RDI: 0000000000000000 RBP: ffff880604f22150 R08: 0000000000000000 R09: ffffffff81a4dc10 R10: 00000000000032a0 R11: ffff880006202500 R12: 0000000000000000 R13: 0000000000c40000 R14: 0000000000008000 R15: 0000000000000001 FS: 00007fbc03d066f0(0000) GS:ffff8800282e0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 000000060f029000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process sh (pid: 7949, threadinfo ffff8806044f0000, task ffff880603d7c600) Stack: ffff880604f22140 ffffffff8103aac5 ffff880604f22140 ffffffff8104d21e ffff880006202500 0000000000008000 0000000000c38000 ffffffff810bd5b1 0000000000000000 ffff880603d7c600 00000000ffffdd29 0000000000000003 Call Trace: __put_task_struct+0x5d/0x97 kthread_stop+0x50/0x58 offline_pages+0x324/0x3da memory_block_change_state+0x179/0x1db store_mem_state+0x9e/0xbb sysfs_write_file+0xd0/0x107 vfs_write+0xad/0x169 sys_write+0x45/0x6e system_call_fastpath+0x16/0x1b Code: ff 4d 00 0f 94 c0 84 c0 74 08 48 89 ef e8 1f fd ff ff 5b 5d 31 c0 41 5c c3 53 48 8b 87 20 06 00 00 48 89 fb 48 8b bf 18 06 00 00 <8b> 00 48 c7 83 18 06 00 00 00 00 00 00 f0 ff 0f 0f 94 c0 84 c0 RIP exit_creds+0x12/0x78 RSP <ffff8806044f1d78> CR2: 0000000000000000 [akpm@linux-foundation.org: add pglist_data.kswapd locking comments] Signed-off-by: Xishi Qiu <qiuxishi@huawei.com> Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-12timekeeping: Provide hrtimer update functionThomas Gleixner1-0/+1
To finally fix the infamous leap second issue and other race windows caused by functions which change the offsets between the various time bases (CLOCK_MONOTONIC, CLOCK_REALTIME and CLOCK_BOOTTIME) we need a function which atomically gets the current monotonic time and updates the offsets of CLOCK_REALTIME and CLOCK_BOOTTIME with minimalistic overhead. The previous patch which provides ktime_t offsets allows us to make this function almost as cheap as ktime_get() which is going to be replaced in hrtimer_interrupt(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Prarit Bhargava <prarit@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: John Stultz <johnstul@us.ibm.com> Link: http://lkml.kernel.org/r/1341960205-56738-7-git-send-email-johnstul@us.ibm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-12hrtimer: Provide clock_was_set_delayed()John Stultz1-1/+8
clock_was_set() cannot be called from hard interrupt context because it calls on_each_cpu(). For fixing the widely reported leap seconds issue it is necessary to call it from hard interrupt context, i.e. the timer tick code, which does the timekeeping updates. Provide a new function which denotes it in the hrtimer cpu base structure of the cpu on which it is called and raise the hrtimer softirq. We then execute the clock_was_set() notificiation from softirq context in run_hrtimer_softirq(). The hrtimer softirq is rarely used, so polling the flag there is not a performance issue. [ tglx: Made it depend on CONFIG_HIGH_RES_TIMERS. We really should get rid of all this ifdeffery ASAP ] Signed-off-by: John Stultz <johnstul@us.ibm.com> Reported-by: Jan Engelhardt <jengelh@inai.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Prarit Bhargava <prarit@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1341960205-56738-2-git-send-email-johnstul@us.ibm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-11Merge tag 'scsi-fixes' of ↵Linus Torvalds2-3/+11
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of three fixes for data corruption (libsas task file), oops causing (NULL in scsi_cmd_to_driver) and driver failure (bnx2i). The oops caused by the NULL in scsi_cmd_to_driver() manifests in scsi_eh_send_cmd() and has been seen by several people now. Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] bnx2i: Removed the reference to the netdev->base_addr [SCSI] libsas: fix taskfile corruption in sas_ata_qc_fill_rtf [SCSI] Fix NULL dereferences in scsi_cmd_to_driver
2012-07-11Merge tag 'usb-3.5-rc6' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are a few fixes and new device ids for the 3.5-rc6 tree. The PCI changes resolve a long-standing issue with resuming some EHCI controllers. It has been acked by the PCI maintainer, and he asked for it to go through my USB tree instead of his. The xhci patches also resolve a number of reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: PCI: EHCI: fix crash during suspend on ASUS computers USB: cdc-wdm: fix lockup on error in wdm_read USB: metro-usb: fix tty_flip_buffer_push use USB: option: Add MEDIATEK product ids USB: option: add ZTE MF60 xhci: Fix hang on back-to-back Set TR Deq Ptr commands. usb: Add support for root hub port status CAS
2012-07-11Merge tag 'fixes-for-v3.5' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Yes, this is a *LATE* GPIO pull request with fixes for v3.5. Grant moved across the planet and accidentally fell off the grid, so he asked me to take over the GPIO merges for a while 10 days ago. Since then I went over the archives and collected this pile of fixes, and pulled two of them from the TI maintainer Kevin Hilman. Then waited for them to at least hit linux-next once or twice." GPIO fixes for v3.5: - Invalid context restore on bank 0 for OMAP driver in runtime suspend/resume cycle - Check for NULL platform data in sta-2x11 driver - Constrain selection of the V1 MSM GPIO driver to applicable platforms (Kconfig issue) - Make sure the correct output value is set in the wm8994 driver - Export devm_gpio_request_one() so it can be used in modules. Apparently some in-kernel modules can be configured to use this leading to breakage. - Check that the GPIO is valid in the lantiq driver - Fix the flag bits introduced for v3.5, so they don't overlap - Fix a device tree intialization bug for imx21-compatible devices - Carry over the OF node to the TPS65910 GPIO chip struct * tag 'fixes-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: tps65910: initialize of_node of gpio_chip gpio/mxc: make irqs work for fsl,imx21-gpio devices gpio: fix bits conflict for gpio flags mips: pci-lantiq: Fix check for valid gpio gpio: export devm_gpio_request_one gpiolib: wm8994: Pay attention to the value set when enabling as output gpio/msm_v1: CONFIG_GPIO_MSM_V1 is only available on three SoCs gpio-sta2x11: don't use pdata if null gpio/omap: fix invalid context restore of gpio bank-0 gpio/omap: fix irq loss while in idle with debounce on
2012-07-10PCI: EHCI: fix crash during suspend on ASUS computersAlan Stern1-2/+0
Quite a few ASUS computers experience a nasty problem, related to the EHCI controllers, when going into system suspend. It was observed that the problem didn't occur if the controllers were not put into the D3 power state before starting the suspend, and commit 151b61284776be2d6f02d48c23c3625678960b97 (USB: EHCI: fix crash during suspend on ASUS computers) was created to do this. It turned out this approach messed up other computers that didn't have the problem -- it prevented USB wakeup from working. Consequently commit c2fb8a3fa25513de8fedb38509b1f15a5bbee47b (USB: add NO_D3_DURING_SLEEP flag and revert 151b61284776be2) was merged; it reverted the earlier commit and added a whitelist of known good board names. Now we know the actual cause of the problem. Thanks to AceLan Kao for tracking it down. According to him, an engineer at ASUS explained that some of their BIOSes contain a bug that was added in an attempt to work around a problem in early versions of Windows. When the computer goes into S3 suspend, the BIOS tries to verify that the EHCI controllers were first quiesced by the OS. Nothing's wrong with this, but the BIOS does it by checking that the PCI COMMAND registers contain 0 without checking the controllers' power state. If the register isn't 0, the BIOS assumes the controller needs to be quiesced and tries to do so. This involves making various MMIO accesses to the controller, which don't work very well if the controller is already in D3. The end result is a system hang or memory corruption. Since the value in the PCI COMMAND register doesn't matter once the controller has been suspended, and since the value will be restored anyway when the controller is resumed, we can work around the BIOS bug simply by setting the register to 0 during system suspend. This patch (as1590) does so and also reverts the second commit mentioned above, which is now unnecessary. In theory we could do this for every PCI device. However to avoid introducing new problems, the patch restricts itself to EHCI host controllers. Finally the affected systems can suspend with USB wakeup working properly. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=37632 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=42728 Based-on-patch-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Dâniel Fraga <fragabr@gmail.com> Tested-by: Javier Marcet <jmarcet@gmail.com> Tested-by: Andrey Rahmatullin <wrar@wrar.name> Tested-by: Oleksij Rempel <bug-track@fisher-privat.net> Tested-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Cc: stable <stable@vger.kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-10Merge tag 'rpmsg-3.5-fixes' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/ohad/rpmsg Pull rpmsg fixes from Ohad Ben-Cohen: "Fixing two (somewhat rare) endpoint-related race issues, both of which were reported by Fernando Guzman Lugo." * tag 'rpmsg-3.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/rpmsg: rpmsg: make sure inflight messages don't invoke just-removed callbacks rpmsg: avoid premature deallocation of endpoints
2012-07-08[SCSI] libsas: fix taskfile corruption in sas_ata_qc_fill_rtfDan Williams1-2/+4
fill_result_tf() grabs the taskfile flags from the originating qc which sas_ata_qc_fill_rtf() promptly overwrites. The presence of an ata_taskfile in the sata_device makes it tempting to just copy the full contents in sas_ata_qc_fill_rtf(). However, libata really only wants the fis contents and expects the other portions of the taskfile to not be touched by ->qc_fill_rtf. To that end store a fis buffer in the sata_device and use ata_tf_from_fis() like every other ->qc_fill_rtf() implementation. Cc: <stable@vger.kernel.org> Reported-by: Praveen Murali <pmurali@logicube.com> Tested-by: Praveen Murali <pmurali@logicube.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-08[SCSI] Fix NULL dereferences in scsi_cmd_to_driverMark Rustad1-1/+7
Avoid crashing if the private_data pointer happens to be NULL. This has been seen sometimes when a host reset happens, notably when there are many LUNs: host3: Assigned Port ID 0c1601 scsi host3: libfc: Host reset succeeded on port (0c1601) BUG: unable to handle kernel NULL pointer dereference at 0000000000000350 IP: [<ffffffff81352bb8>] scsi_send_eh_cmnd+0x58/0x3a0 <snip> Process scsi_eh_3 (pid: 4144, threadinfo ffff88030920c000, task ffff880326b160c0) Stack: 000000010372e6ba 0000000000000282 000027100920dca0 ffffffffa0038ee0 0000000000000000 0000000000030003 ffff88030920dc80 ffff88030920dc80 00000002000e0000 0000000a00004000 ffff8803242f7760 ffff88031326ed80 Call Trace: [<ffffffff8105b590>] ? lock_timer_base+0x70/0x70 [<ffffffff81352fbe>] scsi_eh_tur+0x3e/0xc0 [<ffffffff81353a36>] scsi_eh_test_devices+0x76/0x170 [<ffffffff81354125>] scsi_eh_host_reset+0x85/0x160 [<ffffffff81354291>] scsi_eh_ready_devs+0x91/0x110 [<ffffffff813543fd>] scsi_unjam_host+0xed/0x1f0 [<ffffffff813546a8>] scsi_error_handler+0x1a8/0x200 [<ffffffff81354500>] ? scsi_unjam_host+0x1f0/0x1f0 [<ffffffff8106ec3e>] kthread+0x9e/0xb0 [<ffffffff81509264>] kernel_thread_helper+0x4/0x10 [<ffffffff8106eba0>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff81509260>] ? gs_change+0x13/0x13 Code: 25 28 00 00 00 48 89 45 c8 31 c0 48 8b 87 80 00 00 00 48 8d b5 60 ff ff ff 89 d1 48 89 fb 41 89 d6 4c 89 fa 48 8b 80 b8 00 00 00 <48> 8b 80 50 03 00 00 48 8b 00 48 89 85 38 ff ff ff 48 8b 07 4c RIP [<ffffffff81352bb8>] scsi_send_eh_cmnd+0x58/0x3a0 RSP <ffff88030920dc50> CR2: 0000000000000350 Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Cc: <stable@kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-07security: Minor improvements to no_new_privs documentationAndy Lutomirski1-0/+2
The documentation didn't actually mention how to enable no_new_privs. This also adds a note about possible interactions between no_new_privs and LSMs (i.e. why teaching systemd to set no_new_privs is not necessarily a good idea), and it references the new docs from include/linux/prctl.h. Suggested-by: Rob Landley <rob@landley.net> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-07-06Merge branch 'fixes' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 Pull ocfs2 fixes from Joel Becker. * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: aio: make kiocb->private NUll in init_sync_kiocb() ocfs2: Fix bogus error message from ocfs2_global_read_info ocfs2: for SEEK_DATA/SEEK_HOLE, return internal error unchanged if ocfs2_get_clusters_nocache() or ocfs2_inode_lock() call failed. ocfs2: use spinlock irqsave for downconvert lock.patch ocfs2: Misplaced parens in unlikley ocfs2: clear unaligned io flag when dio fails
2012-07-06Merge branch 'for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fixes from Dmitry Torokhov: "Two fixes for regressions in Wacom driver and fixes for drivers using threaded IRQ framework without specifying IRQF_ONESHOT." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: request threaded-only IRQs with IRQF_ONESHOT Input: wacom - don't retrieve touch_max when it is predefined Input: wacom - fix retrieving touch_max bug Input: fix input.h kernel-doc warning
2012-07-06Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-2/+2
Pull KVM fix from Marcelo Tosatti: "Memory leak and oops on the x86 mmu code, and sanitization of the KVM_IRQFD ioctl." * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: MMU: fix shrinking page from the empty mmu KVM: fix fault page leak KVM: Sanitize KVM_IRQFD flags KVM: Add missing KVM_IRQFD API documentation KVM: Pass kvm_irqfd to functions
2012-07-05gpio: fix bits conflict for gpio flagsLaxman Dewangan1-2/+2
The bit 2 and 3 in GPIO flag are allocated for the flag OPEN_DRAIN/OPEN_SOURCE. These bits are reused for the flag EXPORT/EXPORT_CHANGEABLE and so creating conflict. Fix this conflict by assigning bit 4 and 5 for the flag EXPORT/EXPORT_CHANGEABLE. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-31 04:23:28 +0300