| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
Here are some changes to AF_RXRPC:
(1) Cache the transmission serial number of ACK and DATA packets in the
rxrpc_txbuf struct and log this in the retransmit tracepoint.
(2) Don't use atomics on rxrpc_txbuf::flags[*] and cache the intended wire
header flags there too to avoid duplication.
(3) Cache the wire checksum in rxrpc_txbuf to make it easier to create
jumbo packets in future (which will require altering the wire header
to a jumbo header and restoring it back again for retransmission).
(4) Fix the protocol names in the wire ACK trailer struct.
(5) Strip all the barriers and atomics out of the call timer tracking[*].
(6) Remove atomic handling from call->tx_transmitted and
call->acks_prev_seq[*].
(7) Don't bother resetting the DF flag after UDP packet transmission. To
change it, we now call directly into UDP code, so it's quick just to
set it every time.
(8) Merge together the DF/non-DF branches of the DATA transmission to
reduce duplication in the code.
(9) Add a kvec array into rxrpc_txbuf and start moving things over to it.
This paves the way for using page frags.
(10) Split (sub)packet preparation and timestamping out of the DATA
transmission function. This helps pave the way for future jumbo
packet generation.
(11) In rxkad, don't pick values out of the wire header stored in
rxrpc_txbuf, buf rather find them elsewhere so we can remove the wire
header from there.
(12) Move rxrpc_send_ACK() to output.c so that it can be merged with
rxrpc_send_ack_packet().
(13) Use rxrpc_txbuf::kvec[0] to access the wire header for the packet
rather than directly accessing the copy in rxrpc_txbuf. This will
allow that to be removed to a page frag.
(14) Switch from keeping the transmission buffers in rxrpc_txbuf allocated
in the slab to allocating them using page fragment allocators. There
are separate allocators for DATA packets (which persist for a while)
and control packets (which are discarded immediately).
We can then turn on MSG_SPLICE_PAGES when transmitting DATA and ACK
packets.
We can also get rid of the RCU cleanup on rxrpc_txbufs, preferring
instead to release the page frags as soon as possible.
(15) Parse received packets before handling timeouts as the former may
reset the latter.
(16) Make sure we don't retransmit DATA packets after all the packets have
been ACK'd.
(17) Differentiate traces for PING ACK transmission.
(18) Switch to keeping timeouts as ktime_t rather than a number of jiffies
as the latter is too coarse a granularity. Only set the call timer at
the end of the call event function from the aggregate of all the
timeouts, thereby reducing the number of timer calls made. In future,
it might be possible to reduce the number of timers from one per call
to one per I/O thread and to use a high-precision timer.
(19) Record RTT probes after successful transmission rather than recording
it before and then cancelling it after if unsuccessful[*]. This
allows a number of calls to get the current time to be removed.
(20) Clean up the resend algorithm as there's now no need to walk the
transmission buffer under lock[*]. DATA packets can be retransmitted
as soon as they're found rather than being queued up and transmitted
when the locked is dropped.
(21) When initially parsing a received ACK packet, extract some of the
fields from the ack info to the skbuff private data. This makes it
easier to do path MTU discovery in the future when the call to which a
PING RESPONSE ACK refers has been deallocated.
[*] Possible with the move of almost all code from softirq context to the
I/O thread.
Link: https://lore.kernel.org/r/20240301163807.385573-1-dhowells@redhat.com/ # v1
Link: https://lore.kernel.org/r/20240304084322.705539-1-dhowells@redhat.com/ # v2
* tag 'rxrpc-iothread-20240305' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (21 commits)
rxrpc: Extract useful fields from a received ACK to skb priv data
rxrpc: Clean up the resend algorithm
rxrpc: Record probes after transmission and reduce number of time-gets
rxrpc: Use ktimes for call timeout tracking and set the timer lazily
rxrpc: Differentiate PING ACK transmission traces.
rxrpc: Don't permit resending after all Tx packets acked
rxrpc: Parse received packets before dealing with timeouts
rxrpc: Do zerocopy using MSG_SPLICE_PAGES and page frags
rxrpc: Use rxrpc_txbuf::kvec[0] instead of rxrpc_txbuf::wire
rxrpc: Move rxrpc_send_ACK() to output.c with rxrpc_send_ack_packet()
rxrpc: Don't pick values out of the wire header when setting up security
rxrpc: Split up the DATA packet transmission function
rxrpc: Add a kvec[] to the rxrpc_txbuf struct
rxrpc: Merge together DF/non-DF branches of data Tx function
rxrpc: Do lazy DF flag resetting
rxrpc: Remove atomic handling on some fields only used in I/O thread
rxrpc: Strip barriers and atomics off of timer tracking
rxrpc: Fix the names of the fields in the ACK trailer struct
rxrpc: Note cksum in txbuf
rxrpc: Convert rxrpc_txbuf::flags into a mask and don't use atomics
...
====================
Link: https://lore.kernel.org/r/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
net/core/page_pool_user.c
0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors")
429679dcf7d9 ("page_pool: fix netlink dump stop/resume")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, ipsec and netfilter.
No solution yet for the stmmac issue mentioned in the last PR, but it
proved to be a lockdep false positive, not a blocker.
Current release - regressions:
- dpll: move all dpll<>netdev helpers to dpll code, fix build
regression with old compilers
Current release - new code bugs:
- page_pool: fix netlink dump stop/resume
Previous releases - regressions:
- bpf: fix verifier to check bpf_func_state->callback_depth when
pruning states as otherwise unsafe programs could get accepted
- ipv6: avoid possible UAF in ip6_route_mpath_notify()
- ice: reconfig host after changing MSI-X on VF
- mlx5:
- e-switch, change flow rule destination checking
- add a memory barrier to prevent a possible null-ptr-deref
- switch to using _bh variant of of spinlock where needed
Previous releases - always broken:
- netfilter: nf_conntrack_h323: add protection for bmp length out of
range
- bpf: fix to zero-initialise xdp_rxq_info struct before running XDP
program in CPU map which led to random xdp_md fields
- xfrm: fix UDP encapsulation in TX packet offload
- netrom: fix data-races around sysctls
- ice:
- fix potential NULL pointer dereference in ice_bridge_setlink()
- fix uninitialized dplls mutex usage
- igc: avoid returning frame twice in XDP_REDIRECT
- i40e: disable NAPI right after disabling irqs when handling
xsk_pool
- geneve: make sure to pull inner header in geneve_rx()
- sparx5: fix use after free inside sparx5_del_mact_entry
- dsa: microchip: fix register write order in ksz8_ind_write8()
Misc:
- selftests: mptcp: fixes for diag.sh"
* tag 'net-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
net: pds_core: Fix possible double free in error handling path
netrom: Fix data-races around sysctl_net_busy_read
netrom: Fix a data-race around sysctl_netrom_link_fails_count
netrom: Fix a data-race around sysctl_netrom_routing_control
netrom: Fix a data-race around sysctl_netrom_transport_no_activity_timeout
netrom: Fix a data-race around sysctl_netrom_transport_requested_window_size
netrom: Fix a data-race around sysctl_netrom_transport_busy_delay
netrom: Fix a data-race around sysctl_netrom_transport_acknowledge_delay
netrom: Fix a data-race around sysctl_netrom_transport_maximum_tries
netrom: Fix a data-race around sysctl_netrom_transport_timeout
netrom: Fix data-races around sysctl_netrom_network_ttl_initialiser
netrom: Fix a data-race around sysctl_netrom_obsolescence_count_initialiser
netrom: Fix a data-race around sysctl_netrom_default_path_quality
netfilter: nf_conntrack_h323: Add protection for bmp length out of range
netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout
netfilter: nft_ct: fix l3num expectations with inet pseudo family
netfilter: nf_tables: reject constant set with timeout
netfilter: nf_tables: disallow anonymous set with timeout flag
net/rds: fix WARNING in rds_conn_connect_if_down
net: dsa: microchip: fix register write order in ksz8_ind_write8()
...
|
|
Use the existing parameter and print the address of skbaddr
as other trace functions do.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Printing the addresses can help us identify the exact skb/sk
for those system in which it's not that easy to run BPF program.
As we can see, it already fetches those, then use it directly
and it will print like below:
...tcp_retransmit_skb: skbaddr=XXX skaddr=XXX family=AF_INET...
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
commit 4d72c3bb60dd ("net: phylink: strip out pre-March 2020 legacy code")
dropped the mac_pcs_get_state ops in phylink_mac_ops in favor of
dedicated PCS operation pcs_get_state. However, the documentation for
the pcs_get_state ops was incorrectly converted and now self-references.
Drop the extra comment.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Get rid of copy_mc flag in iov_iter which really only makes sense for
the core dumping code so move it out of the generic iov iter code and
make it coredump's problem. See the detailed commit description.
- Revert fs/aio: Make io_cancel() generate completions again
The initial fix here was predicated on the assumption that calling
ki_cancel() didn't complete aio requests. However, that turned out to
be wrong since the two drivers that actually make use of this set a
cancellation function that performs the cancellation correctly. So
revert this change.
- Ensure that the test for IOCB_AIO_RW always happens before the read
from ki_ctx.
* tag 'vfs-6.8-release.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iov_iter: get rid of 'copy_mc' flag
fs/aio: Check IOCB_AIO_RW before the struct aio_kiocb conversion
Revert "fs/aio: Make io_cancel() generate completions again"
|
|
Currently getsockopt does not support IP_ROUTER_ALERT and
IPV6_ROUTER_ALERT, and we are unable to get the values of these two
socket options through getsockopt.
This patch adds getsockopt support for IP_ROUTER_ALERT and
IPV6_ROUTER_ALERT.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This flag is only set by one single user: the magical core dumping code
that looks up user pages one by one, and then writes them out using
their kernel addresses (by using a BVEC_ITER).
That actually ends up being a huge problem, because while we do use
copy_mc_to_kernel() for this case and it is able to handle the possible
machine checks involved, nothing else is really ready to handle the
failures caused by the machine check.
In particular, as reported by Tong Tiangen, we don't actually support
fault_in_iov_iter_readable() on a machine check area.
As a result, the usual logic for writing things to a file under a
filesystem lock, which involves doing a copy with page faults disabled
and then if that fails trying to fault pages in without holding the
locks with fault_in_iov_iter_readable() does not work at all.
We could decide to always just make the MC copy "succeed" (and filling
the destination with zeroes), and that would then create a core dump
file that just ignores any machine checks.
But honestly, this single special case has been problematic before, and
means that all the normal iov_iter code ends up slightly more complex
and slower.
See for example commit c9eec08bac96 ("iov_iter: Don't deal with
iter->copy_mc in memcpy_from_iter_mc()") where David Howells
re-organized the code just to avoid having to check the 'copy_mc' flags
inside the inner iov_iter loops.
So considering that we have exactly one user, and that one user is a
non-critical special case that doesn't actually ever trigger in real
life (Tong found this with manual error injection), the sane solution is
to just decide that the onus on handling the machine check lines on that
user instead.
Ergo, do the copy_mc_to_kernel() in the core dump logic itself, copying
the user data to a stable kernel page before writing it out.
Fixes: f1982740f5e7 ("iov_iter: Convert iterate*() to inline funcs")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Link: https://lore.kernel.org/r/20240305133336.3804360-1-tongtiangen@huawei.com
Link: https://lore.kernel.org/all/4e80924d-9c85-f13a-722a-6a5d2b1c225a@huawei.com/
Tested-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reported-by: Tong Tiangen <tongtiangen@huawei.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In order for EEE to operate, both the MAC and the PHY need to support
it, similar to how pause works. With some exception - a number of PHYs
have SmartEEE or AutoGrEEEn support in order to provide some EEE-like
power savings with non-EEE capable MACs.
Copy the pause concept and add the call phy_support_eee() which the MAC
makes after connecting the PHY to indicate it supports EEE. phylib will
then advertise EEE when auto-neg is performed.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240302195306.3207716-6-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Have phylib keep track of the EEE configuration. This simplifies the
MAC drivers, in that they don't need to store it.
Future patches to phylib will also make use of this information to
further simplify the MAC drivers.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240302195306.3207716-4-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MAC drivers which support EEE need to know the results of the EEE
auto-neg in order to program the hardware to perform EEE or not. The
oddly named phy_init_eee() can be used to determine this, it returns 0
if EEE should be used, or a negative error code,
e.g. -EOPPROTONOTSUPPORT if the PHY does not support EEE or negotiate
resulted in it not being used.
However, many MAC drivers get this wrong. Add phydev->enable_tx_lpi
which indicates the result of the autoneg for EEE, including if EEE is
administratively disabled with ethtool. The MAC driver can then access
this in the same way as link speed and duplex in the adjust link
callback. If enable_tx_lpi is true, the MAC should send low power
indications and does not need to consider anything else with respect
to EEE.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240302195306.3207716-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add helpers that phylib and phylink can use to manage EEE configuration
and determine whether the MAC should be permitted to use LPI based on
that configuration.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240302195306.3207716-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Older versions of GCC really want to know the full definition
of the type involved in rcu_assign_pointer().
struct dpll_pin is defined in a local header, net/core can't
reach it. Move all the netdev <> dpll code into dpll, where
the type is known. Otherwise we'd need multiple function calls
to jump between the compilation units.
This is the same problem the commit under fixes was trying to address,
but with rcu_assign_pointer() not rcu_dereference().
Some of the exports are not needed, networking core can't
be a module, we only need exports for the helpers used by
drivers.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/all/35a869c8-52e8-177-1d4d-e57578b99b6@linux-m68k.org/
Fixes: 640f41ed33b5 ("dpll: fix build failure due to rcu_dereference_check() on unknown type")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240305013532.694866-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Track the call timeouts as ktimes rather than jiffies as the latter's
granularity is too high and only set the timer at the end of the event
handling function.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
|
|
There are three points that transmit PING ACKs and all of them use the same
trace string. Change two of them to use different strings.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Multiple fixes, cleanups and documentations for Hyper-V core code and
drivers
* tag 'hyperv-fixes-signed-20240303' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: make hv_bus const
x86/hyperv: Allow 15-bit APIC IDs for VTL platforms
x86/hyperv: Make encrypted/decrypted changes safe for load_unaligned_zeropad()
x86/mm: Regularize set_memory_p() parameters and make non-static
x86/hyperv: Use slow_virt_to_phys() in page transition hypervisor callback
Documentation: hyperv: Add overview of PCI pass-thru device support
Drivers: hv: vmbus: Update indentation in create_gpadl_header()
Drivers: hv: vmbus: Remove duplication and cleanup code in create_gpadl_header()
fbdev/hyperv_fb: Fix logic error for Gen2 VMs in hvfb_getmem()
Drivers: hv: vmbus: Calculate ring buffer size for more efficient use of memory
hv_utils: Allow implicit ICTIMESYNCFLAG_SYNC
|
|
Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the nfc_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240302-class_cleanup-net-next-v1-6-8fa378595b93@marliere.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Bridge driver today has no support to forward the userspace timestamp
packets and ends up resetting the timestamp. ETF qdisc checks the
packet coming from userspace and encounters to be 0 thereby dropping
time sensitive packets. These changes will allow userspace timestamps
packets to be forwarded from the bridge to NIC drivers.
Setting the same bit (mono_delivery_time) to avoid dropping of
userspace tstamp packets in the forwarding path.
Existing functionality of mono_delivery_time remains unaltered here,
instead just extended with userspace tstamp support for bridge
forwarding path.
Signed-off-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240301201348.2815102-1-quic_abchauha@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently the so-called GRO fast path is only enabled for
napi_frags_skb() callers.
After the prior patch, we no longer have to clear frag0 whenever
we pulled bytes to skb->head.
We therefore can initialize frag0 to skb->data so that GRO
fast path can be used in the following additional cases:
- Drivers using header split (populating skb->data with headers,
and having payload in one or more page fragments).
- Drivers not using any page frag (entire packet is in skb->data)
Add a likely() in skb_gro_may_pull() to help the compiler
to generate better code if possible.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Change skb_gro_network_header() to accept a const sk_buff
and to no longer check if frag0 is NULL or not.
This allows to remove skb_gro_frag0_invalidate()
which is seen in profiles when header-split is enabled.
sk_buff parameter is constified for skb_gro_header_fast(),
inet_gro_compute_pseudo() and ip6_gro_compute_pseudo().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
skb_gro_header_hard() is renamed to skb_gro_may_pull() to match
the convention used by common helpers like pskb_may_pull().
This means the condition is inverted:
if (skb_gro_header_hard(skb, hlen))
slow_path();
becomes:
if (!skb_gro_may_pull(skb, hlen))
slow_path();
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When draining a page_frag_cache, most user are doing
the similar steps, so introduce an API to avoid code
duplication.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
napi_alloc_frag_align() and netdev_alloc_frag_align() accept
align as an argument, and they are thin wrappers around the
__napi_alloc_frag_align() and __netdev_alloc_frag_align() APIs
doing the alignment checking and align mask conversion, in order
to call page_frag_alloc_align() directly. The intention here is
to keep the alignment checking and the alignmask conversion in
in-line wrapper to avoid those kind of operations during execution
time since it can usually be handled during compile time.
We are going to use page_frag_alloc_align() in vhost_net.c, it
need the same kind of alignment checking and alignmask conversion,
so split up page_frag_alloc_align into an inline wrapper doing the
above operation, and add __page_frag_alloc_align() which is passed
with the align mask the original function expected as suggested by
Alexander.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
CC: Alexander Duyck <alexander.duyck@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2024-03-01
This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
* tag 'mlx5-fixes-2024-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Switch to using _bh variant of of spinlock API in port timestamping NAPI poll context
net/mlx5e: Use a memory barrier to enforce PTP WQ xmit submission tracking occurs after populating the metadata_map
net/mlx5e: Fix MACsec state loss upon state update in offload path
net/mlx5e: Change the warning when ignore_flow_level is not supported
net/mlx5: Check capability for fw_reset
net/mlx5: Fix fw reporter diagnose output
net/mlx5: E-switch, Change flow rule destination checking
Revert "net/mlx5e: Check the number of elements before walk TC rhashtable"
Revert "net/mlx5: Block entering switchdev mode with ns inconsistency"
====================
Link: https://lore.kernel.org/r/20240302070318.62997-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Stephen Rothwell and kernel test robot reported that some arches
(parisc, hexagon) and/or compilers would not like blamed commit.
Lets make sure tcp_sock_write_rx group does not start with a hole.
While we are at it, correct tcp_sock_write_tx CACHELINE_ASSERT_GROUP_SIZE()
since after the blamed commit, we went to 105 bytes.
Fixes: 99123622050f ("tcp: remove some holes in struct tcp_sock")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/netdev/20240301121108.5d39e4f9@canb.auug.org.au/
Closes: https://lore.kernel.org/oe-kbuild-all/202403011451.csPYOS3C-lkp@intel.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://lore.kernel.org/r/20240301171945.2958176-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I'm updating __assign_str() and will be removing the second parameter. To
make sure that it does not break anything, I make sure that it matches the
__string() field, as that is where the string is actually going to be
saved in. To make sure there's nothing that breaks, I added a WARN_ON() to
make sure that what was used in __string() is the same that is used in
__assign_str().
In doing this change, an error was triggered as __assign_str() now expects
the string passed in to be a char * value. I instead had the following
warning:
include/trace/events/qdisc.h: In function ‘trace_event_raw_event_qdisc_reset’:
include/trace/events/qdisc.h:91:35: error: passing argument 1 of 'strcmp' from incompatible pointer type [-Werror=incompatible-pointer-types]
91 | __assign_str(dev, qdisc_dev(q));
That's because the qdisc_enqueue() and qdisc_reset() pass in qdisc_dev(q)
to __assign_str() and to __string(). But that function returns a pointer
to struct net_device and not a string.
It appears that these events are just saving the pointer as a string and
then reading it as a string as well.
Use qdisc_dev(q)->name to save the device instead.
Fixes: a34dac0b90552 ("net_sched: add tracepoints for qdisc_reset() and qdisc_destroy()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
(skb_transport_header(skb) - skb_network_header(skb))
can be replaced by skb_network_header_len(skb)
Add a DEBUG_NET_WARN_ON_ONCE() in skb_network_header_len()
to catch cases were the transport_header was not set.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-02-29
We've added 119 non-merge commits during the last 32 day(s) which contain
a total of 150 files changed, 3589 insertions(+), 995 deletions(-).
The main changes are:
1) Extend the BPF verifier to enable static subprog calls in spin lock
critical sections, from Kumar Kartikeya Dwivedi.
2) Fix confusing and incorrect inference of PTR_TO_CTX argument type
in BPF global subprogs, from Andrii Nakryiko.
3) Larger batch of riscv BPF JIT improvements and enabling inlining
of the bpf_kptr_xchg() for RV64, from Pu Lehui.
4) Allow skeleton users to change the values of the fields in struct_ops
maps at runtime, from Kui-Feng Lee.
5) Extend the verifier's capabilities of tracking scalars when they
are spilled to stack, especially when the spill or fill is narrowing,
from Maxim Mikityanskiy & Eduard Zingerman.
6) Various BPF selftest improvements to fix errors under gcc BPF backend,
from Jose E. Marchesi.
7) Avoid module loading failure when the module trying to register
a struct_ops has its BTF section stripped, from Geliang Tang.
8) Annotate all kfuncs in .BTF_ids section which eventually allows
for automatic kfunc prototype generation from bpftool, from Daniel Xu.
9) Several updates to the instruction-set.rst IETF standardization
document, from Dave Thaler.
10) Shrink the size of struct bpf_map resp. bpf_array,
from Alexei Starovoitov.
11) Initial small subset of BPF verifier prepwork for sleepable bpf_timer,
from Benjamin Tissoires.
12) Fix bpftool to be more portable to musl libc by using POSIX's
basename(), from Arnaldo Carvalho de Melo.
13) Add libbpf support to gcc in CORE macro definitions,
from Cupertino Miranda.
14) Remove a duplicate type check in perf_event_bpf_event,
from Florian Lehner.
15) Fix bpf_spin_{un,}lock BPF helpers to actually annotate them
with notrace correctly, from Yonghong Song.
16) Replace the deprecated bpf_lpm_trie_key 0-length array with flexible
array to fix build warnings, from Kees Cook.
17) Fix resolve_btfids cross-compilation to non host-native endianness,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits)
selftests/bpf: Test if shadow types work correctly.
bpftool: Add an example for struct_ops map and shadow type.
bpftool: Generated shadow variables for struct_ops maps.
libbpf: Convert st_ops->data to shadow type.
libbpf: Set btf_value_type_id of struct bpf_map for struct_ops.
bpf: Replace bpf_lpm_trie_key 0-length array with flexible array
bpf, arm64: use bpf_prog_pack for memory management
arm64: patching: implement text_poke API
bpf, arm64: support exceptions
arm64: stacktrace: Implement arch_bpf_stack_walk() for the BPF JIT
bpf: add is_async_callback_calling_insn() helper
bpf: introduce in_sleepable() helper
bpf: allow more maps in sleepable bpf programs
selftests/bpf: Test case for lacking CFI stub functions.
bpf: Check cfi_stubs before registering a struct_ops type.
bpf: Clarify batch lookup/lookup_and_delete semantics
bpf, docs: specify which BPF_ABS and BPF_IND fields were zero
bpf, docs: Fix typos in instruction-set.rst
selftests/bpf: update tcp_custom_syncookie to use scalar packet offset
bpf: Shrink size of struct bpf_map/bpf_array.
...
====================
Link: https://lore.kernel.org/r/20240301001625.8800-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In commit 19416123ab3e ("block: define 'struct bvec_iter' as packed"),
what we need is to save the 4byte padding, and avoid `bio` to spread on
one extra cache line.
It is enough to define it as '__packed __aligned(4)', as '__packed'
alone means byte aligned, and can cause compiler to generate horrible
code on architectures that don't support unaligned access in case that
bvec_iter is embedded in other structures.
Cc: Mikulas Patocka <mpatocka@redhat.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 19416123ab3e ("block: define 'struct bvec_iter' as packed")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Functions which can't access MFRL (Management Firmware Reset Level)
register, have no use of fw_reset structures or events. Remove fw_reset
structures allocation and registration for fw reset events notifications
for these functions.
Having the devlink param enable_remote_dev_reset on functions that don't
have this capability is misleading as these functions are not allowed to
influence the reset flow. Hence, this patch removes this parameter for
such functions.
In addition, return not supported on devlink reload action fw_activate
for these functions.
Fixes: 38b9f903f22b ("net/mlx5: Handle sync reset request event")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The amount of changes wasn't as small as wished, but all reasonably
small fixes. There is a PCM core API change, which is for correcting
the behavior change we took in 6.8. The rest are device-specific fixes
for ASoC AMD, Qualcomm, Cirrus codecs, HD-audio quirks & co"
* tag 'sound-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: amd: yc: Fix non-functional mic on Lenovo 21J2
ASoC: amd: yc: add new YC platform variant (0x63) support
ALSA: hda/realtek - ALC285 reduce pop noise from Headphone port
ASoC: amd: yc: Add Lenovo ThinkBook 21J0 into DMI quirk table
ALSA: hda/realtek: Add special fixup for Lenovo 14IRP8
ASoC: soc-card: Fix missing locking in snd_soc_card_get_kcontrol()
ALSA: hda/realtek: tas2781: enable subwoofer volume control
ALSA: pcm: clarify and fix default msbits value for all formats
ASoC: qcom: Fix uninitialized pointer dmactl
ALSA: hda/realtek: fix mute/micmute LED For HP mt440
ALSA: Drop leftover snd-rtctimer stuff from Makefile
ALSA: ump: Fix the discard error code from snd_ump_legacy_open()
ALSA: hda/realtek: Enable Mute LED on HP 840 G8 (MB 8AB8)
ASoC: cs35l56: Must clear HALO_STATE before issuing SYSTEM_RESET
ALSA: hda/realtek: Fix top speaker connection on Dell Inspiron 16 Plus 7630
ALSA: firewire-lib: fix to check cycle continuity
|
|
Pull drm fixes from Dave Airlie:
"Bunch of fixes, xe, amdgpu, nouveau and tegra all have a few. Then
drm/bridge including some drivers/soc fallout fixes. The biggest thing
in here is a new unit test for some buddy allocator fixes, otherwise a
misc fbcon, ttm unit test and one msm revert.
Seems pretty normal for this stage.
buddy:
- two allocation fixes + unit test
fbcon:
- font restore syzkaller fix
ttm:
- kunit test fix
bridge:
- fix aux-hpd leaks
- fix aux-hpd registration
- fix use after free in soc/qcom
- fix boot on soc/qcom
xe:
- A couple of tracepoint updates from Priyanka and Lucas
- Make sure BINDs are completed before accepting UNBINDs on LR vms
- Don't arbitrarily restrict max number of batched binds
- Add uapi for dumpable bos (agreed on IRC)
- Remove unused uapi flags and a leftover comment
- A couple of fixes related to the execlist backend
msm:
- DP: Revert a change which was causing a HDP regression
amdgpu:
- Fix potential buffer overflow
- Fix power min cap
- Suspend/resume fix
- SI PM fix
- eDP fix
nouveau:
- fix a misreported VRAM sizing
- fix a regression in suspend/resume due to freeing
tegra:
- host1x reset fix
- only remove existing driver if display is possible"
* tag 'drm-fixes-2024-03-01' of https://gitlab.freedesktop.org/drm/kernel: (32 commits)
drm/nouveau: keep DMA buffers required for suspend/resume
nouveau: report byte usage in VRAM usage
drm/xe/xe_trace: Add move_lacks_source detail to xe_bo_move trace
drm/xe: Deny unbinds if uapi ufence pending
drm/xe: Expose user fence from xe_sync_entry
drm/xe: Use pointers in trace events
drm/xe/xe_bo_move: Enhance xe_bo_move trace
drm/xe/mmio: fix build warning for BAR resize on 32-bit
drm/xe: get rid of MAX_BINDS
drm/xe: Use vmalloc for array of bind allocation in bind IOCTL
drm/xe: Don't support execlists in xe_gt_tlb_invalidation layer
drm/xe: Fix execlist splat
drm/xe/uapi: Remove unused flags
drm/xe/uapi: Remove DRM_XE_VM_BIND_FLAG_ASYNC comment left over
drm/xe: Add uapi for dumpable bos
drm/amd/display: Add monitor patch for specific eDP
Revert "drm/msm/dp: use drm_bridge_hpd_notify() to report HPD status changes"
drm/tests/drm_buddy: add alloc_range_bias test
drm/buddy: check range allocation matches alignment
drm/buddy: fix range bias
...
|
|
It is now possible to disable BQL, but that causes the cpsw driver to break:
drivers/net/ethernet/ti/am65-cpsw-nuss.c:297:28: error: no member named 'dql' in 'struct netdev_queue'
297 | dql_avail(&netif_txq->dql),
There is already a helper function in net/sch_generic.h that could
be used to help here. Move its implementation into the common
linux/netdevice.h along with the other bql interfaces and change
both users over to the new interface.
Fixes: ea7f3cfaa588 ("net: bql: allow the config to be disabled")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no need to wrap calls to the no_printk() helper inside an
always-false check, as no_printk() already does that internally.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
idev->cnf.ignore_routes_with_linkdown can be used without any locks,
add appropriate annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
idev->cnf.forwarding and net->ipv6.devconf_all->forwarding
might be read locklessly, add appropriate READ_ONCE()
and WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
idev->cnf.mtu6 might be read locklessly, add appropriate READ_ONCE()
and WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IPv6 TX and RX fast path use the following fields:
- disable_ipv6
- hop_limit
- mtu6
- forwarding
- disable_policy
- proxy_ndp
Place them in a group to increase data locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The VMBUS_RING_SIZE macro adds space for a ring buffer header to the
requested ring buffer size. The header size is always 1 page, and so
its size varies based on the PAGE_SIZE for which the kernel is built.
If the requested ring buffer size is a large power-of-2 size and the header
size is small, the resulting size is inefficient in its use of memory.
For example, a 512 Kbyte ring buffer with a 4 Kbyte page size results in
a 516 Kbyte allocation, which is rounded to up 1 Mbyte by the memory
allocator, and wastes 508 Kbytes of memory.
In such situations, the exact size of the ring buffer isn't that important,
and it's OK to allocate the 4 Kbyte header at the beginning of the 512
Kbytes, leaving the ring buffer itself with just 508 Kbytes. The memory
allocation can be 512 Kbytes instead of 1 Mbyte and nothing is wasted.
Update VMBUS_RING_SIZE to implement this approach for "large" ring buffer
sizes. "Large" is somewhat arbitrarily defined as 8 times the size of
the ring buffer header (which is of size PAGE_SIZE). For example, for
4 Kbyte PAGE_SIZE, ring buffers of 32 Kbytes and larger use the first
4 Kbytes as the ring buffer header. For 64 Kbyte PAGE_SIZE, ring buffers
of 512 Kbytes and larger use the first 64 Kbytes as the ring buffer
header. In both cases, smaller sizes add space for the header so
the ring size isn't reduced too much by using part of the space for
the header. For example, with a 64 Kbyte page size, we don't want
a 128 Kbyte ring buffer to be reduced to 64 Kbytes by allocating half
of the space for the header. In such a case, the memory allocation
is less efficient, but it's the best that can be done.
While the new algorithm slightly changes the amount of space allocated
for ring buffers by drivers that use VMBUS_RING_SIZE, the devices aren't
known to be sensitive to small changes in ring buffer size, so there
shouldn't be any effect.
Fixes: c1135c7fd0e9 ("Drivers: hv: vmbus: Introduce types of GPADL")
Fixes: 6941f67ad37d ("hv_netvsc: Calculate correct ring size when PAGE_SIZE is not 4 Kbytes")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218502
Cc: stable@vger.kernel.org
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240229004533.313662-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240229004533.313662-1-mhklinux@outlook.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
- A couple of tracepoint updates from Priyanka and Lucas.
- Make sure BINDs are completed before accepting UNBINDs on LR vms.
- Don't arbitrarily restrict max number of batched binds.
- Add uapi for dumpable bos (agreed on IRC).
- Remove unused uapi flags and a leftover comment.
Driver Changes:
- A couple of fixes related to the execlist backend.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZeCBg4MA2hd1oggN@fedora
|
|
https://anongit.freedesktop.org/git/drm/drm-misc into drm-fixes
A reset fix for host1x, a resource leak fix and a probe fix for aux-hpd,
a use-after-free fix and a boot fix for a pmic_glink qcom driver in
drivers/soc, a fix for the simpledrm/tegra transition, a kunit fix for
the TTM tests, a font handling fix for fbcon, two allocation fixes and a
kunit test to cover them for drm/buddy
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240229-angelic-adorable-teal-fbfabb@houat
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/mptcp/protocol.c
adf1bb78dab5 ("mptcp: fix snd_wnd initialization for passive socket")
9426ce476a70 ("mptcp: annotate lockless access for RX path fields")
https://lore.kernel.org/all/20240228103048.19255709@canb.auug.org.au/
Adjacent changes:
drivers/dpll/dpll_core.c
0d60d8df6f49 ("dpll: rely on rcu for netdev_dpll_pin()")
e7f8df0e81bf ("dpll: move xa_erase() call in to match dpll_pin_alloc() error path order")
drivers/net/veth.c
1ce7d306ea63 ("veth: try harder when allocating queue memory")
0bef512012b1 ("net: add netdev_lockdep_set_classes() to virtual drivers")
drivers/net/wireless/intel/iwlwifi/mvm/d3.c
8c9bef26e98b ("wifi: iwlwifi: mvm: d3: implement suspend with MLO")
78f65fbf421a ("wifi: iwlwifi: mvm: ensure offloading TID queue exists")
net/wireless/nl80211.c
f78c1375339a ("wifi: nl80211: reject iftype change with mesh ID change")
414532d8aa89 ("wifi: cfg80211: use IEEE80211_MAX_MESH_ID_LEN appropriately")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace deprecated 0-length array in struct bpf_lpm_trie_key with
flexible array. Found with GCC 13:
../kernel/bpf/lpm_trie.c:207:51: warning: array subscript i is outside array bounds of 'const __u8[0]' {aka 'const unsigned char[]'} [-Warray-bounds=]
207 | *(__be16 *)&key->data[i]);
| ^~~~~~~~~~~~~
../include/uapi/linux/swab.h:102:54: note: in definition of macro '__swab16'
102 | #define __swab16(x) (__u16)__builtin_bswap16((__u16)(x))
| ^
../include/linux/byteorder/generic.h:97:21: note: in expansion of macro '__be16_to_cpu'
97 | #define be16_to_cpu __be16_to_cpu
| ^~~~~~~~~~~~~
../kernel/bpf/lpm_trie.c:206:28: note: in expansion of macro 'be16_to_cpu'
206 | u16 diff = be16_to_cpu(*(__be16 *)&node->data[i]
^
| ^~~~~~~~~~~
In file included from ../include/linux/bpf.h:7:
../include/uapi/linux/bpf.h:82:17: note: while referencing 'data'
82 | __u8 data[0]; /* Arbitrary size */
| ^~~~
And found at run-time under CONFIG_FORTIFY_SOURCE:
UBSAN: array-index-out-of-bounds in kernel/bpf/lpm_trie.c:218:49
index 0 is out of range for type '__u8 [*]'
Changing struct bpf_lpm_trie_key is difficult since has been used by
userspace. For example, in Cilium:
struct egress_gw_policy_key {
struct bpf_lpm_trie_key lpm_key;
__u32 saddr;
__u32 daddr;
};
While direct references to the "data" member haven't been found, there
are static initializers what include the final member. For example,
the "{}" here:
struct egress_gw_policy_key in_key = {
.lpm_key = { 32 + 24, {} },
.saddr = CLIENT_IP,
.daddr = EXTERNAL_SVC_IP & 0Xffffff,
};
To avoid the build time and run time warnings seen with a 0-sized
trailing array for struct bpf_lpm_trie_key, introduce a new struct
that correctly uses a flexible array for the trailing bytes,
struct bpf_lpm_trie_key_u8. As part of this, include the "header"
portion (which is just the "prefixlen" member), so it can be used
by anything building a bpf_lpr_trie_key that has trailing members that
aren't a u8 flexible array (like the self-test[1]), which is named
struct bpf_lpm_trie_key_hdr.
Unfortunately, C++ refuses to parse the __struct_group() helper, so
it is not possible to define struct bpf_lpm_trie_key_hdr directly in
struct bpf_lpm_trie_key_u8, so we must open-code the union directly.
Adjust the kernel code to use struct bpf_lpm_trie_key_u8 through-out,
and for the selftest to use struct bpf_lpm_trie_key_hdr. Add a comment
to the UAPI header directing folks to the two new options.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Closes: https://paste.debian.net/hidden/ca500597/
Link: https://lore.kernel.org/all/202206281009.4332AA33@keescook/ [1]
Link: https://lore.kernel.org/bpf/20240222155612.it.533-kees@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, WiFi and netfilter.
We have one outstanding issue with the stmmac driver, which may be a
LOCKDEP false positive, not a blocker.
Current release - regressions:
- netfilter: nf_tables: re-allow NFPROTO_INET in
nft_(match/target)_validate()
- eth: ionic: fix error handling in PCI reset code
Current release - new code bugs:
- eth: stmmac: complete meta data only when enabled, fix null-deref
- kunit: fix again checksum tests on big endian CPUs
Previous releases - regressions:
- veth: try harder when allocating queue memory
- Bluetooth:
- hci_bcm4377: do not mark valid bd_addr as invalid
- hci_event: fix handling of HCI_EV_IO_CAPA_REQUEST
Previous releases - always broken:
- info leak in __skb_datagram_iter() on netlink socket
- mptcp:
- map v4 address to v6 when destroying subflow
- fix potential wake-up event loss due to sndbuf auto-tuning
- fix double-free on socket dismantle
- wifi: nl80211: reject iftype change with mesh ID change
- fix small out-of-bound read when validating netlink be16/32 types
- rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
- ipv6: fix potential "struct net" ref-leak in inet6_rtm_getaddr()
- ip_tunnel: prevent perpetual headroom growth with huge number of
tunnels on top of each other
- mctp: fix skb leaks on error paths of mctp_local_output()
- eth: ice: fixes for DPLL state reporting
- dpll: rely on rcu for netdev_dpll_pin() to prevent UaF
- eth: dpaa: accept phy-interface-type = '10gbase-r' in the device
tree"
* tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
dpll: fix build failure due to rcu_dereference_check() on unknown type
kunit: Fix again checksum tests on big endian CPUs
tls: fix use-after-free on failed backlog decryption
tls: separate no-async decryption request handling from async
tls: fix peeking with sync+async decryption
tls: decrement decrypt_pending if no async completion will be called
gtp: fix use-after-free and null-ptr-deref in gtp_newlink()
net: hsr: Use correct offset for HSR TLV values in supervisory HSR frames
igb: extend PTP timestamp adjustments to i211
rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
tools: ynl: fix handling of multiple mcast groups
selftests: netfilter: add bridge conntrack + multicast test case
netfilter: bridge: confirm multicast packets before passing them up the stack
netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
Bluetooth: qca: Fix triggering coredump implementation
Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
Bluetooth: qca: Fix wrong event type for patch config command
Bluetooth: Enforce validation on max value of connection interval
Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
Bluetooth: mgmt: Fix limited discoverable off timeout
...
|
|
Tasmiya reports that their compiler complains that we deref
a pointer to unknown type with rcu_dereference_rtnl():
include/linux/rcupdate.h:439:9: error: dereferencing pointer to incomplete type ‘struct dpll_pin’
Unclear what compiler it is, at the moment, and we can't report
but since DPLL can't be a module - move the code from the header
into the source file.
Fixes: 0d60d8df6f49 ("dpll: rely on rcu for netdev_dpll_pin()")
Reported-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com>
Link: https://lore.kernel.org/all/3fcf3a2c-1c1b-42c1-bacb-78fdcd700389@linux.vnet.ibm.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240229190515.2740221-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
From AFS-3.3 a trailer containing extra info was added to the ACK packet
format - but AF_RXRPC has the names of some of the fields mixed up compared
to other AFS implementations.
Rename the struct and the fields to make them match.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
|
|
Convert the transmission buffer flags into a mask and use | and & rather
than bitops functions (atomic ops are not required as only the I/O thread
can manipulate them once submitted for transmission).
The bottom byte can then correspond directly to the Rx protocol header
flags.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
|
|
Each Rx protocol packet contains a per-connection monotonically increasing
serial number used to correlate outgoing messages with their replies -
something that can be used for RTT calculation.
Note this value in the rxrpc_txbuf struct in addition to the wire header
and then log it in the rxrpc_retransmit trace for reference.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
Patch #1 restores NFPROTO_INET with nft_compat, from Ignat Korchagin.
Patch #2 fixes an issue with bridge netfilter and broadcast/multicast
packets.
There is a day 0 bug in br_netfilter when used with connection tracking.
Conntrack assumes that an nf_conn structure that is not yet added to
hash table ("unconfirmed"), is only visible by the current cpu that is
processing the sk_buff.
For bridge this isn't true, sk_buff can get cloned in between, and
clones can be processed in parallel on different cpu.
This patch disables NAT and conntrack helpers for multicast packets.
Patch #3 adds a selftest to cover for the br_netfilter bug.
netfilter pull request 24-02-29
* tag 'nf-24-02-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: add bridge conntrack + multicast test case
netfilter: bridge: confirm multicast packets before passing them up the stack
netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
====================
Link: https://lore.kernel.org/r/20240229000135.8780-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
