Age | Commit message (Collapse) | Author | Files | Lines |
|
This adds basic support for delivering 2 level event channels to a guest.
Initially, it only supports delivery via the IRQ routing table, triggered
by an eventfd. In order to do so, it has a kvm_xen_set_evtchn_fast()
function which will use the pre-mapped shared_info page if it already
exists and is still valid, while the slow path through the irqfd_inject
workqueue will remap the shared_info page if necessary.
It sets the bits in the shared_info page but not the vcpu_info; that is
deferred to __kvm_xen_has_interrupt() which raises the vector to the
appropriate vCPU.
Add a 'verbose' mode to xen_shinfo_test while adding test cases for this.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211210163625.2886-5-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This can be used in two modes. There is an atomic mode where the cached
mapping is accessed while holding the rwlock, and a mode where the
physical address is used by a vCPU in guest mode.
For the latter case, an invalidation will wake the vCPU with the new
KVM_REQ_GPC_INVALIDATE, and the architecture will need to refresh any
caches it still needs to access before entering guest mode again.
Only one vCPU can be targeted by the wake requests; it's simple enough
to make it wake all vCPUs or even a mask but I don't see a use case for
that additional complexity right now.
Invalidation happens from the invalidate_range_start MMU notifier, which
needs to be able to sleep in order to wake the vCPU and wait for it.
This means that revalidation potentially needs to "wait" for the MMU
operation to complete and the invalidate_range_end notifier to be
invoked. Like the vCPU when it takes a page fault in that period, we
just spin — fixing that in a future patch by implementing an actual
*wait* may be another part of shaving this particularly hirsute yak.
As noted in the comments in the function itself, the only case where
the invalidate_range_start notifier is expected to be called *without*
being able to sleep is when the OOM reaper is killing the process. In
that case, we expect the vCPU threads already to have exited, and thus
there will be nothing to wake, and no reason to wait. So we clear the
KVM_REQUEST_WAIT bit and send the request anyway, then complain loudly
if there actually *was* anything to wake up.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211210163625.2886-3-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The various kvm_write_guest() and mark_page_dirty() functions must only
ever be called in the context of an active vCPU, because if dirty ring
tracking is enabled it may simply oops when kvm_get_running_vcpu()
returns NULL for the vcpu and then kvm_dirty_ring_get() dereferences it.
This oops was reported by "butt3rflyh4ck" <butterflyhuangxx@gmail.com> in
https://lore.kernel.org/kvm/CAFcO6XOmoS7EacN_n6v4Txk7xL7iqRa2gABg3F7E3Naf5uG94g@mail.gmail.com/
That actual bug will be fixed under separate cover but this warning
should help to prevent new ones from being added.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211210163625.2886-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM/riscv changes for 5.17, take #1
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.16
- Simplification of the 'vcpu first run' by integrating it into
KVM's 'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to
a simpler state and less shared data between EL1 and EL2 in
the nVHE case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be
unmapped from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once
the vcpu xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and
page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
|
|
The number of GPA bits supported for a RISC-V Guest/VM is based on the
MMU mode used by the G-stage translation. The KVM RISC-V will detect and
use the best possible MMU mode for the G-stage in kvm_arch_init().
We add a generic VM capability KVM_CAP_VM_GPA_BITS which can be used by
the KVM userspace to get the number of GPA (guest physical address) bits
supported for a Guest/VM.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-and-tested-by: Atish Patra <atishp@rivosinc.com>
|
|
arm_vgic.h does not require all the stuff that kernel.h provides.
Replace kernel.h inclusion with the list of what is really being used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220104151940.55399-1-andriy.shevchenko@linux.intel.com
|
|
I'd like to make the build include dirty_ring.c based on whether the
arch wants it or not. That's a whole lot simpler if there's a config
symbol instead of doing it implicitly on KVM_DIRTY_LOG_PAGE_OFFSET
being set to something non-zero.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211121125451.9489-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Merge bugfix for enlightened MSR Bitmap, before adding support
to KVM for exposing the feature to nested guests.
|
|
Add helpers to wake and query a blocking vCPU. In addition to providing
nice names, the helpers reduce the probability of KVM neglecting to use
kvm_arch_vcpu_get_wait().
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-20-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a "blocking" stat that userspace can use to detect the case where a
vCPU is not being run because of an vCPU/guest action, e.g. HLT or WFS on
x86, WFI on arm64, etc... Current guest/host/halt stats don't show this
well, e.g. if a guest halts for a long period of time then the vCPU could
could appear pathologically blocked due to a host condition, when in
reality the vCPU has been put into a not-runnable state by the guest.
Originally-by: Cannon Matthews <cannonmatthews@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Jing Zhang <jingzhangos@google.com>
[sean: renamed stat to "blocking", massaged changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Factor out the "block" part of kvm_vcpu_halt() so that x86 can emulate
non-halt wait/sleep/block conditions that should not be subjected to
halt-polling.
No functional change intended.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-15-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rename kvm_vcpu_block() to kvm_vcpu_halt() in preparation for splitting
the actual "block" sequences into a separate helper (to be named
kvm_vcpu_block()). x86 will use the standalone block-only path to handle
non-halt cases where the vCPU is not runnable.
Rename block_ns to halt_ns to match the new function name.
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Do not define/reference kvm_vcpu.wait if __KVM_HAVE_ARCH_WQP is true, and
instead force the architecture (PPC) to define its own rcuwait object.
Allowing common KVM to directly access vcpu->wait without a guard makes
it all too easy to introduce potential bugs, e.g. kvm_vcpu_block(),
kvm_vcpu_on_spin(), and async_pf_execute() all operate on vcpu->wait, not
the result of kvm_arch_vcpu_get_wait(), and so may do the wrong thing for
PPC.
Due to PPC's shenanigans with respect to callbacks and waits (it switches
to the virtual core's wait object at KVM_RUN!?!?), it's not clear whether
or not this fixes any bugs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In preparation for implementing in-place hugepage promotion, various
functions will need to be called from zap_collapsible_spte_range, which
has the const qualifier on its memslot argument. Propagate the const
qualifier to the various functions which will be needed. This just serves
to simplify the following patch.
No functional change intended.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20211115234603.2908381-11-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Introduce a memslots gfn upper bound operation and use it to optimize
kvm_zap_gfn_range().
This way this handler can do a quick lookup for intersecting gfns and won't
have to do a linear scan of the whole memslot set.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <ef242146a87a335ee93b441dcf01665cb847c902.1638817641.git.maciej.szmigiero@oracle.com>
|
|
The current memslot code uses a (reverse gfn-ordered) memslot array for
keeping track of them.
Because the memslot array that is currently in use cannot be modified
every memslot management operation (create, delete, move, change flags)
has to make a copy of the whole array so it has a scratch copy to work on.
Strictly speaking, however, it is only necessary to make copy of the
memslot that is being modified, copying all the memslots currently present
is just a limitation of the array-based memslot implementation.
Two memslot sets, however, are still needed so the VM continues to run
on the currently active set while the requested operation is being
performed on the second, currently inactive one.
In order to have two memslot sets, but only one copy of actual memslots
it is necessary to split out the memslot data from the memslot sets.
The memslots themselves should be also kept independent of each other
so they can be individually added or deleted.
These two memslot sets should normally point to the same set of
memslots. They can, however, be desynchronized when performing a
memslot management operation by replacing the memslot to be modified
by its copy. After the operation is complete, both memslot sets once
again point to the same, common set of memslot data.
This commit implements the aforementioned idea.
For tracking of gfns an ordinary rbtree is used since memslots cannot
overlap in the guest address space and so this data structure is
sufficient for ensuring that lookups are done quickly.
The "last used slot" mini-caches (both per-slot set one and per-vCPU one),
that keep track of the last found-by-gfn memslot, are still present in the
new code.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <17c0cf3663b760a0d3753d4ac08c0753e941b811.1638817641.git.maciej.szmigiero@oracle.com>
|
|
The current memslots implementation only allows quick binary search by gfn,
quick lookup by hva is not possible - the implementation has to do a linear
scan of the whole memslots array, even though the operation being performed
might apply just to a single memslot.
This significantly hurts performance of per-hva operations with higher
memslot counts.
Since hva ranges can overlap between memslots an interval tree is needed
for tracking them.
[sean: handle interval tree updates in kvm_replace_memslot()]
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <d66b9974becaa9839be9c4e1a5de97b177b4ac20.1638817640.git.maciej.szmigiero@oracle.com>
|
|
Memslot ID to the corresponding memslot mappings are currently kept as
indices in static id_to_index array.
The size of this array depends on the maximum allowed memslot count
(regardless of the number of memslots actually in use).
This has become especially problematic recently, when memslot count cap was
removed, so the maximum count is now full 32k memslots - the maximum
allowed by the current KVM API.
Keeping these IDs in a hash table (instead of an array) avoids this
problem.
Resolving a memslot ID to the actual memslot (instead of its index) will
also enable transitioning away from an array-based implementation of the
whole memslots structure in a later commit.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <117fb2c04320e6cd6cf34f205a72eadb0aa8d5f9.1638817640.git.maciej.szmigiero@oracle.com>
|
|
s390 arch has gfn_to_memslot_approx() which is almost identical to
search_memslots(), differing only in that in case the gfn falls in a hole
one of the memslots bordering the hole is returned.
Add this lookup mode as an option to search_memslots() so we don't have two
almost identical functions for looking up a memslot by its gfn.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
[sean: tweaked helper names to keep gfn_to_memslot_approx() in s390]
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <171cd89b52c718dbe180ecd909b4437a64a7e2ec.1638817640.git.maciej.szmigiero@oracle.com>
|
|
Drop the @mem param from kvm_arch_{prepare,commit}_memory_region() now
that its use has been removed in all architectures.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <aa5ed3e62c27e881d0d8bc0acbc1572bc336dc19.1638817640.git.maciej.szmigiero@oracle.com>
|
|
Pass the "old" slot to kvm_arch_prepare_memory_region() and force arch
code to handle propagating arch specific data from "new" to "old" when
necessary. This is a baby step towards dynamically allocating "new" from
the get go, and is a (very) minor performance boost on x86 due to not
unnecessarily copying arch data.
For PPC HV, copy the rmap in the !CREATE and !DELETE paths, i.e. for MOVE
and FLAGS_ONLY. This is functionally a nop as the previous behavior
would overwrite the pointer for CREATE, and eventually discard/ignore it
for DELETE.
For x86, copy the arch data only for FLAGS_ONLY changes. Unlike PPC HV,
x86 needs to reallocate arch data in the MOVE case as the size of x86's
allocations depend on the alignment of the memslot's gfn.
Opportunistically tweak kvm_arch_prepare_memory_region()'s param order to
match the "commit" prototype.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
[mss: add missing RISCV kvm_arch_prepare_memory_region() change]
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <67dea5f11bbcfd71e3da5986f11e87f5dd4013f9.1638817639.git.maciej.szmigiero@oracle.com>
|
|
Explicitly disallow creating more memslot pages than can fit in an
unsigned long, KVM doesn't correctly handle a total number of memslot
pages that doesn't fit in an unsigned long and remedying that would be a
waste of time.
For a 64-bit kernel, this is a nop as memslots are not allowed to overlap
in the gfn address space.
With a 32-bit kernel, userspace can at most address 3gb of virtual memory,
whereas wrapping the total number of pages would require 4tb+ of guest
physical memory. Even with x86's second address space for SMM, userspace
would need to alias all of guest memory more than one _thousand_ times.
And on older x86 hardware with MAXPHYADDR < 43, the guest couldn't
actually access any of those aliases even if userspace lied about
guest.MAXPHYADDR.
On 390 and arm64, this is a nop as they don't support 32-bit hosts.
On x86, practically speaking this is simply acknowledging reality as the
existing kvm_mmu_calculate_default_mmu_pages() assumes the total number
of pages fits in an "unsigned long".
On PPC, this is likely a nop as every flavor of PPC KVM assumes gfns (and
gpas!) fit in unsigned long. arch/powerpc/kvm/book3s_32_mmu_host.c goes
a step further and fails the build if CONFIG_PTE_64BIT=y, which
presumably means that it does't support 64-bit physical addresses.
On MIPS, this is also likely a nop as the core MMU helpers assume gpas
fit in unsigned long, e.g. see kvm_mips_##name##_pte.
And finally, RISC-V is a "don't care" as it doesn't exist in any release,
i.e. there is no established ABI to break.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <1c2c91baf8e78acccd4dad38da591002e61c013c.1638817638.git.maciej.szmigiero@oracle.com>
|
|
Now that the vcpu array is backed by an xarray, use the optimised
iterator that matches the underlying data structure.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20211116160403.4074052-8-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Everywhere we use kvm_for_each_vpcu(), we use an int as the vcpu
index. Unfortunately, we're about to move rework the iterator,
which requires this to be upgrade to an unsigned long.
Let's bite the bullet and repaint all of it in one go.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20211116160403.4074052-7-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
At least on arm64 and x86, the vcpus array is pretty huge (up to
1024 entries on x86) and is mostly empty in the majority of the cases
(running 1k vcpu VMs is not that common).
This mean that we end-up with a 4kB block of unused memory in the
middle of the kvm structure.
Instead of wasting away this memory, let's use an xarray instead,
which gives us almost the same flexibility as a normal array, but
with a reduced memory usage with smaller VMs.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20211116160403.4074052-6-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
All architectures have similar loops iterating over the vcpus,
freeing one vcpu at a time, and eventually wiping the reference
off the vcpus array. They are also inconsistently taking
the kvm->lock mutex when wiping the references from the array.
Make this code common, which will simplify further changes.
The locking is dropped altogether, as this should only be called
when there is no further references on the kvm structure.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20211116160403.4074052-2-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm_is_transparent_hugepage() was removed in commit 205d76ff0684 ("KVM:
Remove kvm_is_transparent_hugepage() and PageTransCompoundMap()") but its
declaration in include/linux/kvm_host.h persisted. Drop it.
Fixes: 205d76ff0684 (""KVM: Remove kvm_is_transparent_hugepage() and PageTransCompoundMap()")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211018151407.2107363-1-vkuznets@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Properly init uclamp_flags of a runqueue, on first enqueuing
- Fix preempt= callback return values
- Correct utime/stime resource usage reporting on nohz_full to return
the proper times instead of shorter ones
* tag 'sched_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/uclamp: Fix rq->uclamp_max not set on first enqueue
preempt/dynamic: Fix setup_preempt_mode() return value
sched/cputime: Fix getrusage(RUSAGE_THREAD) with nohz_full
|
|
Pull drm fixes from Dave Airlie:
"Bit of an uptick in patch count this week, though it's all relatively
small overall.
I suspect msm has been queuing up a few fixes to skew it here.
Otherwise amdgpu has a scattered bunch of small fixes, and then some
vc4, i915.
virtio-gpu changes an rc1 introduced uAPI mistake, and makes it
operate more like other drivers. This should be fine as no userspace
relies on the behaviour yet.
Summary:
dma-buf:
- memory leak fix
msm:
- kasan found memory overwrite
- mmap flags
- fencing error bug
- ioctl NULL ptr
- uninit var
- devfreqless devices fix
- dsi lanes fix
- dp: avoid unpowered aux xfers
amdgpu:
- IP discovery based enumeration fixes
- vkms fixes
- DSC fixes for DP MST
- Audio fix for hotplug with tiled displays
- Misc display fixes
- DP tunneling fix
- DP fix
- Aldebaran fix
amdkfd:
- Locking fix
- Static checker fix
- Fix double free
i915:
- backlight regression
- Intel HDR backlight detection fix
- revert TGL workaround that caused hangs
virtio-gpu:
- switch back to drm_poll
vc4:
- memory leak
- error check fix
- HVS modesetting fixes"
* tag 'drm-fixes-2021-12-03-1' of git://anongit.freedesktop.org/drm/drm: (41 commits)
Revert "drm/i915: Implement Wa_1508744258"
drm/amdkfd: process_info lock not needed for svm
drm/amdgpu: adjust the kfd reset sequence in reset sriov function
drm/amd/display: add connector type check for CRC source set
drm/amdkfd: fix double free mem structure
drm/amdkfd: set "r = 0" explicitly before goto
drm/amd/display: Add work around for tunneled MST.
drm/amd/display: Fix for the no Audio bug with Tiled Displays
drm/amd/display: Clear DPCD lane settings after repeater training
drm/amd/display: Allow DSC on supported MST branch devices
drm/amdgpu: Don't halt RLC on GFX suspend
drm/amdgpu: fix the missed handling for SDMA2 and SDMA3
drm/amdgpu: check atomic flag to differeniate with legacy path
drm/amdgpu: cancel the correct hrtimer on exit
drm/amdgpu/sriov/vcn: add new vcn ip revision check case for SIENNA_CICHLID
drm/i915/dp: Perform 30ms delay after source OUI write
dma-buf: system_heap: Use 'for_each_sgtable_sg' in pages free flow
drm/i915: Add support for panels with VESA backlights with PWM enable/disable
drm/vc4: kms: Fix previous HVS commit wait
drm/vc4: kms: Don't duplicate pending commit
...
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Switch back to drm_poll for virtio, multiple fixes (memory leak,
improper error check, some functional fixes too) for vc4, memory leak
fix in dma-buf,
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211202084440.u3b7lbeulj7k3ltg@houat
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, and wireguard.
Mostly scattered driver changes this week, with one big clump in
mv88e6xxx. Nothing of note, really.
Current release - regressions:
- smc: keep smc_close_final()'s error code during active close
Current release - new code bugs:
- iwlwifi: various static checker fixes (int overflow, leaks, missing
error codes)
- rtw89: fix size of firmware header before transfer, avoid crash
- mt76: fix timestamp check in tx_status; fix pktid leak;
- mscc: ocelot: fix missing unlock on error in ocelot_hwstamp_set()
Previous releases - regressions:
- smc: fix list corruption in smc_lgr_cleanup_early
- ipv4: convert fib_num_tclassid_users to atomic_t
Previous releases - always broken:
- tls: fix authentication failure in CCM mode
- vrf: reset IPCB/IP6CB when processing outbound pkts, prevent
incorrect processing
- dsa: mv88e6xxx: fixes for various device errata
- rds: correct socket tunable error in rds_tcp_tune()
- ipv6: fix memory leak in fib6_rule_suppress
- wireguard: reset peer src endpoint when netns exits
- wireguard: improve resilience to DoS around incoming handshakes
- tcp: fix page frag corruption on page fault which involves TCP
- mpls: fix missing attributes in delete notifications
- mt7915: fix NULL pointer dereference with ad-hoc mode
Misc:
- rt2x00: be more lenient about EPROTO errors during start
- mlx4_en: update reported link modes for 1/10G"
* tag 'net-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: dsa: b53: Add SPI ID table
gro: Fix inconsistent indenting
selftests: net: Correct case name
net/rds: correct socket tunable error in rds_tcp_tune()
mctp: Don't let RTM_DELROUTE delete local routes
net/smc: Keep smc_close_final rc during active close
ibmvnic: drop bad optimization in reuse_tx_pools()
ibmvnic: drop bad optimization in reuse_rx_pools()
net/smc: fix wrong list_del in smc_lgr_cleanup_early
Fix Comment of ETH_P_802_3_MIN
ethernet: aquantia: Try MAC address from device tree
ipv4: convert fib_num_tclassid_users to atomic_t
net: avoid uninit-value from tcp_conn_request
net: annotate data-races on txq->xmit_lock_owner
octeontx2-af: Fix a memleak bug in rvu_mbox_init()
net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources()
vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmit
net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings()
net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed
net: dsa: mv88e6xxx: Fix inband AN for 2500base-x on 88E6393X family
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Three tracing fixes:
- Allow compares of strings when using signed and unsigned characters
- Fix kmemleak false positive for histogram entries
- Handle negative numbers for user defined kretprobe data sizes"
* tag 'trace-v5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
kprobes: Limit max data_size of the kretprobe instances
tracing: Fix a kmemleak false positive in tracing_map
tracing/histograms: String compares should not care about signed values
|
|
getrusage(RUSAGE_THREAD) with nohz_full may return shorter utime/stime
than the actual time.
task_cputime_adjusted() snapshots utime and stime and then adjust their
sum to match the scheduler maintained cputime.sum_exec_runtime.
Unfortunately in nohz_full, sum_exec_runtime is only updated once per
second in the worst case, causing a discrepancy against utime and stime
that can be updated anytime by the reader using vtime.
To fix this situation, perform an update of cputime.sum_exec_runtime
when the cputime snapshot reports the task as actually running while
the tick is disabled. The related overhead is then contained within the
relevant situations.
Reported-by: Hasegawa Hitomi <hasegawa-hitomi@fujitsu.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Hasegawa Hitomi <hasegawa-hitomi@fujitsu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Acked-by: Phil Auld <pauld@redhat.com>
Link: https://lore.kernel.org/r/20211026141055.57358-3-frederic@kernel.org
|
|
The description of ETH_P_802_3_MIN is misleading.
The value of EthernetType in Ethernet II frame is more than 0x0600,
the value of Length in 802.3 frame is less than 0x0600.
Signed-off-by: Xiayu Zhang <Xiayu.Zhang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Before commit faa041a40b9f ("ipv4: Create cleanup helper for fib_nh")
changes to net->ipv4.fib_num_tclassid_users were protected by RTNL.
After the change, this is no longer the case, as free_fib_info_rcu()
runs after rcu grace period, without rtnl being held.
Fixes: faa041a40b9f ("ipv4: Create cleanup helper for fib_nh")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A recent change triggers a KMSAN warning, because request
sockets do not initialize @sk_rx_queue_mapping field.
Add sk_rx_queue_update() helper to make our intent clear.
BUG: KMSAN: uninit-value in sk_rx_queue_set include/net/sock.h:1922 [inline]
BUG: KMSAN: uninit-value in tcp_conn_request+0x3bcc/0x4dc0 net/ipv4/tcp_input.c:6922
sk_rx_queue_set include/net/sock.h:1922 [inline]
tcp_conn_request+0x3bcc/0x4dc0 net/ipv4/tcp_input.c:6922
tcp_v4_conn_request+0x218/0x2a0 net/ipv4/tcp_ipv4.c:1528
tcp_rcv_state_process+0x2c5/0x3290 net/ipv4/tcp_input.c:6406
tcp_v4_do_rcv+0xb4e/0x1330 net/ipv4/tcp_ipv4.c:1738
tcp_v4_rcv+0x468d/0x4ed0 net/ipv4/tcp_ipv4.c:2100
ip_protocol_deliver_rcu+0x760/0x10b0 net/ipv4/ip_input.c:204
ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
ip_local_deliver+0x584/0x8c0 net/ipv4/ip_input.c:252
dst_input include/net/dst.h:460 [inline]
ip_sublist_rcv_finish net/ipv4/ip_input.c:551 [inline]
ip_list_rcv_finish net/ipv4/ip_input.c:601 [inline]
ip_sublist_rcv+0x11fd/0x1520 net/ipv4/ip_input.c:609
ip_list_rcv+0x95f/0x9a0 net/ipv4/ip_input.c:644
__netif_receive_skb_list_ptype net/core/dev.c:5505 [inline]
__netif_receive_skb_list_core+0xe34/0x1240 net/core/dev.c:5553
__netif_receive_skb_list+0x7fc/0x960 net/core/dev.c:5605
netif_receive_skb_list_internal+0x868/0xde0 net/core/dev.c:5696
gro_normal_list net/core/dev.c:5850 [inline]
napi_complete_done+0x579/0xdd0 net/core/dev.c:6587
virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline]
virtnet_poll+0x17b6/0x2350 drivers/net/virtio_net.c:1557
__napi_poll+0x14e/0xbc0 net/core/dev.c:7020
napi_poll net/core/dev.c:7087 [inline]
net_rx_action+0x824/0x1880 net/core/dev.c:7174
__do_softirq+0x1fe/0x7eb kernel/softirq.c:558
invoke_softirq+0xa4/0x130 kernel/softirq.c:432
__irq_exit_rcu kernel/softirq.c:636 [inline]
irq_exit_rcu+0x76/0x130 kernel/softirq.c:648
common_interrupt+0xb6/0xd0 arch/x86/kernel/irq.c:240
asm_common_interrupt+0x1e/0x40
smap_restore arch/x86/include/asm/smap.h:67 [inline]
get_shadow_origin_ptr mm/kmsan/instrumentation.c:31 [inline]
__msan_metadata_ptr_for_load_1+0x28/0x30 mm/kmsan/instrumentation.c:63
tomoyo_check_acl+0x1b0/0x630 security/tomoyo/domain.c:173
tomoyo_path_permission security/tomoyo/file.c:586 [inline]
tomoyo_check_open_permission+0x61f/0xe10 security/tomoyo/file.c:777
tomoyo_file_open+0x24f/0x2d0 security/tomoyo/tomoyo.c:311
security_file_open+0xb1/0x1f0 security/security.c:1635
do_dentry_open+0x4e4/0x1bf0 fs/open.c:809
vfs_open+0xaf/0xe0 fs/open.c:957
do_open fs/namei.c:3426 [inline]
path_openat+0x52f1/0x5dd0 fs/namei.c:3559
do_filp_open+0x306/0x760 fs/namei.c:3586
do_sys_openat2+0x263/0x8f0 fs/open.c:1212
do_sys_open fs/open.c:1228 [inline]
__do_sys_open fs/open.c:1236 [inline]
__se_sys_open fs/open.c:1232 [inline]
__x64_sys_open+0x314/0x380 fs/open.c:1232
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was created at:
__alloc_pages+0xbc7/0x10a0 mm/page_alloc.c:5409
alloc_pages+0x8a5/0xb80
alloc_slab_page mm/slub.c:1810 [inline]
allocate_slab+0x287/0x1c20 mm/slub.c:1947
new_slab mm/slub.c:2010 [inline]
___slab_alloc+0xbdf/0x1e90 mm/slub.c:3039
__slab_alloc mm/slub.c:3126 [inline]
slab_alloc_node mm/slub.c:3217 [inline]
slab_alloc mm/slub.c:3259 [inline]
kmem_cache_alloc+0xbb3/0x11c0 mm/slub.c:3264
reqsk_alloc include/net/request_sock.h:91 [inline]
inet_reqsk_alloc+0xaf/0x8b0 net/ipv4/tcp_input.c:6712
tcp_conn_request+0x910/0x4dc0 net/ipv4/tcp_input.c:6852
tcp_v4_conn_request+0x218/0x2a0 net/ipv4/tcp_ipv4.c:1528
tcp_rcv_state_process+0x2c5/0x3290 net/ipv4/tcp_input.c:6406
tcp_v4_do_rcv+0xb4e/0x1330 net/ipv4/tcp_ipv4.c:1738
tcp_v4_rcv+0x468d/0x4ed0 net/ipv4/tcp_ipv4.c:2100
ip_protocol_deliver_rcu+0x760/0x10b0 net/ipv4/ip_input.c:204
ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
ip_local_deliver+0x584/0x8c0 net/ipv4/ip_input.c:252
dst_input include/net/dst.h:460 [inline]
ip_sublist_rcv_finish net/ipv4/ip_input.c:551 [inline]
ip_list_rcv_finish net/ipv4/ip_input.c:601 [inline]
ip_sublist_rcv+0x11fd/0x1520 net/ipv4/ip_input.c:609
ip_list_rcv+0x95f/0x9a0 net/ipv4/ip_input.c:644
__netif_receive_skb_list_ptype net/core/dev.c:5505 [inline]
__netif_receive_skb_list_core+0xe34/0x1240 net/core/dev.c:5553
__netif_receive_skb_list+0x7fc/0x960 net/core/dev.c:5605
netif_receive_skb_list_internal+0x868/0xde0 net/core/dev.c:5696
gro_normal_list net/core/dev.c:5850 [inline]
napi_complete_done+0x579/0xdd0 net/core/dev.c:6587
virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline]
virtnet_poll+0x17b6/0x2350 drivers/net/virtio_net.c:1557
__napi_poll+0x14e/0xbc0 net/core/dev.c:7020
napi_poll net/core/dev.c:7087 [inline]
net_rx_action+0x824/0x1880 net/core/dev.c:7174
__do_softirq+0x1fe/0x7eb kernel/softirq.c:558
Fixes: 342159ee394d ("net: avoid dirtying sk->sk_rx_queue_mapping")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20211130182939.2584764-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot found that __dev_queue_xmit() is reading txq->xmit_lock_owner
without annotations.
No serious issue there, let's document what is happening there.
BUG: KCSAN: data-race in __dev_queue_xmit / __dev_queue_xmit
write to 0xffff888139d09484 of 4 bytes by interrupt on cpu 0:
__netif_tx_unlock include/linux/netdevice.h:4437 [inline]
__dev_queue_xmit+0x948/0xf70 net/core/dev.c:4229
dev_queue_xmit_accel+0x19/0x20 net/core/dev.c:4265
macvlan_queue_xmit drivers/net/macvlan.c:543 [inline]
macvlan_start_xmit+0x2b3/0x3d0 drivers/net/macvlan.c:567
__netdev_start_xmit include/linux/netdevice.h:4987 [inline]
netdev_start_xmit include/linux/netdevice.h:5001 [inline]
xmit_one+0x105/0x2f0 net/core/dev.c:3590
dev_hard_start_xmit+0x72/0x120 net/core/dev.c:3606
sch_direct_xmit+0x1b2/0x7c0 net/sched/sch_generic.c:342
__dev_xmit_skb+0x83d/0x1370 net/core/dev.c:3817
__dev_queue_xmit+0x590/0xf70 net/core/dev.c:4194
dev_queue_xmit+0x13/0x20 net/core/dev.c:4259
neigh_hh_output include/net/neighbour.h:511 [inline]
neigh_output include/net/neighbour.h:525 [inline]
ip6_finish_output2+0x995/0xbb0 net/ipv6/ip6_output.c:126
__ip6_finish_output net/ipv6/ip6_output.c:191 [inline]
ip6_finish_output+0x444/0x4c0 net/ipv6/ip6_output.c:201
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip6_output+0x10e/0x210 net/ipv6/ip6_output.c:224
dst_output include/net/dst.h:450 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
ndisc_send_skb+0x486/0x610 net/ipv6/ndisc.c:508
ndisc_send_rs+0x3b0/0x3e0 net/ipv6/ndisc.c:702
addrconf_rs_timer+0x370/0x540 net/ipv6/addrconf.c:3898
call_timer_fn+0x2e/0x240 kernel/time/timer.c:1421
expire_timers+0x116/0x240 kernel/time/timer.c:1466
__run_timers+0x368/0x410 kernel/time/timer.c:1734
run_timer_softirq+0x2e/0x60 kernel/time/timer.c:1747
__do_softirq+0x158/0x2de kernel/softirq.c:558
__irq_exit_rcu kernel/softirq.c:636 [inline]
irq_exit_rcu+0x37/0x70 kernel/softirq.c:648
sysvec_apic_timer_interrupt+0x3e/0xb0 arch/x86/kernel/apic/apic.c:1097
asm_sysvec_apic_timer_interrupt+0x12/0x20
read to 0xffff888139d09484 of 4 bytes by interrupt on cpu 1:
__dev_queue_xmit+0x5e3/0xf70 net/core/dev.c:4213
dev_queue_xmit_accel+0x19/0x20 net/core/dev.c:4265
macvlan_queue_xmit drivers/net/macvlan.c:543 [inline]
macvlan_start_xmit+0x2b3/0x3d0 drivers/net/macvlan.c:567
__netdev_start_xmit include/linux/netdevice.h:4987 [inline]
netdev_start_xmit include/linux/netdevice.h:5001 [inline]
xmit_one+0x105/0x2f0 net/core/dev.c:3590
dev_hard_start_xmit+0x72/0x120 net/core/dev.c:3606
sch_direct_xmit+0x1b2/0x7c0 net/sched/sch_generic.c:342
__dev_xmit_skb+0x83d/0x1370 net/core/dev.c:3817
__dev_queue_xmit+0x590/0xf70 net/core/dev.c:4194
dev_queue_xmit+0x13/0x20 net/core/dev.c:4259
neigh_resolve_output+0x3db/0x410 net/core/neighbour.c:1523
neigh_output include/net/neighbour.h:527 [inline]
ip6_finish_output2+0x9be/0xbb0 net/ipv6/ip6_output.c:126
__ip6_finish_output net/ipv6/ip6_output.c:191 [inline]
ip6_finish_output+0x444/0x4c0 net/ipv6/ip6_output.c:201
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip6_output+0x10e/0x210 net/ipv6/ip6_output.c:224
dst_output include/net/dst.h:450 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
ndisc_send_skb+0x486/0x610 net/ipv6/ndisc.c:508
ndisc_send_rs+0x3b0/0x3e0 net/ipv6/ndisc.c:702
addrconf_rs_timer+0x370/0x540 net/ipv6/addrconf.c:3898
call_timer_fn+0x2e/0x240 kernel/time/timer.c:1421
expire_timers+0x116/0x240 kernel/time/timer.c:1466
__run_timers+0x368/0x410 kernel/time/timer.c:1734
run_timer_softirq+0x2e/0x60 kernel/time/timer.c:1747
__do_softirq+0x158/0x2de kernel/softirq.c:558
__irq_exit_rcu kernel/softirq.c:636 [inline]
irq_exit_rcu+0x37/0x70 kernel/softirq.c:648
sysvec_apic_timer_interrupt+0x8d/0xb0 arch/x86/kernel/apic/apic.c:1097
asm_sysvec_apic_timer_interrupt+0x12/0x20
kcsan_setup_watchpoint+0x94/0x420 kernel/kcsan/core.c:443
folio_test_anon include/linux/page-flags.h:581 [inline]
PageAnon include/linux/page-flags.h:586 [inline]
zap_pte_range+0x5ac/0x10e0 mm/memory.c:1347
zap_pmd_range mm/memory.c:1467 [inline]
zap_pud_range mm/memory.c:1496 [inline]
zap_p4d_range mm/memory.c:1517 [inline]
unmap_page_range+0x2dc/0x3d0 mm/memory.c:1538
unmap_single_vma+0x157/0x210 mm/memory.c:1583
unmap_vmas+0xd0/0x180 mm/memory.c:1615
exit_mmap+0x23d/0x470 mm/mmap.c:3170
__mmput+0x27/0x1b0 kernel/fork.c:1113
mmput+0x3d/0x50 kernel/fork.c:1134
exit_mm+0xdb/0x170 kernel/exit.c:507
do_exit+0x608/0x17a0 kernel/exit.c:819
do_group_exit+0xce/0x180 kernel/exit.c:929
get_signal+0xfc3/0x1550 kernel/signal.c:2852
arch_do_signal_or_restart+0x8c/0x2e0 arch/x86/kernel/signal.c:868
handle_signal_work kernel/entry/common.c:148 [inline]
exit_to_user_mode_loop kernel/entry/common.c:172 [inline]
exit_to_user_mode_prepare+0x113/0x190 kernel/entry/common.c:207
__syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline]
syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:300
do_syscall_64+0x50/0xd0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x00000000 -> 0xffffffff
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 28712 Comm: syz-executor.0 Tainted: G W 5.16.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20211130170155.2331929-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 'kprobe::data_size' is unsigned, thus it can not be negative. But if
user sets it enough big number (e.g. (size_t)-8), the result of 'data_size
+ sizeof(struct kretprobe_instance)' becomes smaller than sizeof(struct
kretprobe_instance) or zero. In result, the kretprobe_instance are
allocated without enough memory, and kretprobe accesses outside of
allocated memory.
To avoid this issue, introduce a max limitation of the
kretprobe::data_size. 4KB per instance should be OK.
Link: https://lkml.kernel.org/r/163836995040.432120.10322772773821182925.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: f47cd9b553aa ("kprobes: kretprobe user entry-handler")
Reported-by: zhangyue <zhangyue1@kylinos.cn>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. A large series is found for ASoC tegra
drivers to correct the control element handlings, while others are
mostly for device-specific quirks and fix-ups"
* tag 'sound-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
ALSA: hda/hdmi: fix HDA codec entry table order for ADL-P
ALSA: hda: Add Intel DG2 PCI ID and HDMI codec vid
ALSA: hda/cs8409: Set PMSG_ON earlier inside cs8409 driver
ASoC: SOF: hda: reset DAI widget before reconfiguring it
ASoC: cs35l41: Set the max SPI speed for the whole device
ALSA: intel-dsp-config: add quirk for CML devices based on ES8336 codec
ASoC: Intel: soc-acpi: add entry for ESSX8336 on CML
ASoC: rk817: Add module alias for rk817-codec
ASoC: soc-acpi: Set mach->id field on comp_ids matches
ASoC: tegra: Fix kcontrol put callback in Mixer
ASoC: tegra: Fix kcontrol put callback in ADX
ASoC: tegra: Fix kcontrol put callback in AMX
ASoC: tegra: Fix kcontrol put callback in SFC
ASoC: tegra: Fix kcontrol put callback in MVC
ASoC: tegra: Fix kcontrol put callback in AHUB
ASoC: tegra: Fix kcontrol put callback in DSPK
ASoC: tegra: Fix kcontrol put callback in DMIC
ASoC: tegra: Fix kcontrol put callback in I2S
ASoC: tegra: Fix kcontrol put callback in ADMAIF
ASoC: tegra: Fix wrong value type in MVC
...
|
|
Validate MRTC register is supported before triggering a delayed work
which accesses it.
Fixes: 5a1023deeed0 ("net/mlx5: Add periodic update of host time to firmware")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
On ARM v6 and later, we define CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
because the ordinary load/store instructions (ldr, ldrh, ldrb) can
tolerate any misalignment of the memory address. However, load/store
double and load/store multiple instructions (ldrd, ldm) may still only
be used on memory addresses that are 32-bit aligned, and so we have to
use the CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS macro with care, or we
may end up with a severe performance hit due to alignment traps that
require fixups by the kernel. Testing shows that this currently happens
with clang-13 but not gcc-11. In theory, any compiler version can
produce this bug or other problems, as we are dealing with undefined
behavior in C99 even on architectures that support this in hardware,
see also https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363.
Fortunately, the get_unaligned() accessors do the right thing: when
building for ARMv6 or later, the compiler will emit unaligned accesses
using the ordinary load/store instructions (but avoid the ones that
require 32-bit alignment). When building for older ARM, those accessors
will emit the appropriate sequence of ldrb/mov/orr instructions. And on
architectures that can truly tolerate any kind of misalignment, the
get_unaligned() accessors resolve to the leXX_to_cpup accessors that
operate on aligned addresses.
Since the compiler will in fact emit ldrd or ldm instructions when
building this code for ARM v6 or later, the solution is to use the
unaligned accessors unconditionally on architectures where this is
known to be fast. The _aligned version of the hash function is
however still needed to get the best performance on architectures
that cannot do any unaligned access in hardware.
This new version avoids the undefined behavior and should produce
the fastest hash on all architectures we support.
Link: https://lore.kernel.org/linux-arm-kernel/20181008211554.5355-4-ard.biesheuvel@linaro.org/
Link: https://lore.kernel.org/linux-crypto/CAK8P3a2KfmmGDbVHULWevB0hv71P2oi2ZCHEAqT=8dQfa0=cqQ@mail.gmail.com/
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: 2c956a60778c ("siphash: add cryptographically secure PRF")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Each peer's endpoint contains a dst_cache entry that takes a reference
to another netdev. When the containing namespace exits, we take down the
socket and prevent future sockets from being created (by setting
creating_net to NULL), which removes that potential reference on the
netns. However, it doesn't release references to the netns that a netdev
cached in dst_cache might be taking, so the netns still might fail to
exit. Since the socket is gimped anyway, we can simply clear all the
dst_caches (by way of clearing the endpoint src), which will release all
references.
However, the current dst_cache_reset function only releases those
references lazily. But it turns out that all of our usages of
wg_socket_clear_peer_endpoint_src are called from contexts that are not
exactly high-speed or bottle-necked. For example, when there's
connection difficulty, or when userspace is reconfiguring the interface.
And in particular for this patch, when the netns is exiting. So for
those cases, it makes more sense to call dst_release immediately. For
that, we add a small helper function to dst_cache.
This patch also adds a test to netns.sh from Hangbin Liu to ensure this
doesn't regress.
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Reported-by: Xiumei Mu <xmu@redhat.com>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Fixes: 900575aa33a3 ("wireguard: device: avoid circular netns references")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The kernel leaks memory when a `fib` rule is present in IPv6 nftables
firewall rules and a suppress_prefix rule is present in the IPv6 routing
rules (used by certain tools such as wg-quick). In such scenarios, every
incoming packet will leak an allocation in `ip6_dst_cache` slab cache.
After some hours of `bpftrace`-ing and source code reading, I tracked
down the issue to ca7a03c41753 ("ipv6: do not free rt if
FIB_LOOKUP_NOREF is set on suppress rule").
The problem with that change is that the generic `args->flags` always have
`FIB_LOOKUP_NOREF` set[1][2] but the IPv6-specific flag
`RT6_LOOKUP_F_DST_NOREF` might not be, leading to `fib6_rule_suppress` not
decreasing the refcount when needed.
How to reproduce:
- Add the following nftables rule to a prerouting chain:
meta nfproto ipv6 fib saddr . mark . iif oif missing drop
This can be done with:
sudo nft create table inet test
sudo nft create chain inet test test_chain '{ type filter hook prerouting priority filter + 10; policy accept; }'
sudo nft add rule inet test test_chain meta nfproto ipv6 fib saddr . mark . iif oif missing drop
- Run:
sudo ip -6 rule add table main suppress_prefixlength 0
- Watch `sudo slabtop -o | grep ip6_dst_cache` to see memory usage increase
with every incoming ipv6 packet.
This patch exposes the protocol-specific flags to the protocol
specific `suppress` function, and check the protocol-specific `flags`
argument for RT6_LOOKUP_F_DST_NOREF instead of the generic
FIB_LOOKUP_NOREF when decreasing the refcount, like this.
[1]: https://github.com/torvalds/linux/blob/ca7a03c4175366a92cee0ccc4fec0038c3266e26/net/ipv6/fib6_rules.c#L71
[2]: https://github.com/torvalds/linux/blob/ca7a03c4175366a92cee0ccc4fec0038c3266e26/net/ipv6/fib6_rules.c#L99
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215105
Fixes: ca7a03c41753 ("ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress rule")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Steffen reported a TCP stream corruption for HTTP requests
served by the apache web-server using a cifs mount-point
and memory mapping the relevant file.
The root cause is quite similar to the one addressed by
commit 20eb4f29b602 ("net: fix sk_page_frag() recursion from
memory reclaim"). Here the nested access to the task page frag
is caused by a page fault on the (mmapped) user-space memory
buffer coming from the cifs file.
The page fault handler performs an smb transaction on a different
socket, inside the same process context. Since sk->sk_allaction
for such socket does not prevent the usage for the task_frag,
the nested allocation modify "under the hood" the page frag
in use by the outer sendmsg call, corrupting the stream.
The overall relevant stack trace looks like the following:
httpd 78268 [001] 3461630.850950: probe:tcp_sendmsg_locked:
ffffffff91461d91 tcp_sendmsg_locked+0x1
ffffffff91462b57 tcp_sendmsg+0x27
ffffffff9139814e sock_sendmsg+0x3e
ffffffffc06dfe1d smb_send_kvec+0x28
[...]
ffffffffc06cfaf8 cifs_readpages+0x213
ffffffff90e83c4b read_pages+0x6b
ffffffff90e83f31 __do_page_cache_readahead+0x1c1
ffffffff90e79e98 filemap_fault+0x788
ffffffff90eb0458 __do_fault+0x38
ffffffff90eb5280 do_fault+0x1a0
ffffffff90eb7c84 __handle_mm_fault+0x4d4
ffffffff90eb8093 handle_mm_fault+0xc3
ffffffff90c74f6d __do_page_fault+0x1ed
ffffffff90c75277 do_page_fault+0x37
ffffffff9160111e page_fault+0x1e
ffffffff9109e7b5 copyin+0x25
ffffffff9109eb40 _copy_from_iter_full+0xe0
ffffffff91462370 tcp_sendmsg_locked+0x5e0
ffffffff91462370 tcp_sendmsg_locked+0x5e0
ffffffff91462b57 tcp_sendmsg+0x27
ffffffff9139815c sock_sendmsg+0x4c
ffffffff913981f7 sock_write_iter+0x97
ffffffff90f2cc56 do_iter_readv_writev+0x156
ffffffff90f2dff0 do_iter_write+0x80
ffffffff90f2e1c3 vfs_writev+0xa3
ffffffff90f2e27c do_writev+0x5c
ffffffff90c042bb do_syscall_64+0x5b
ffffffff916000ad entry_SYSCALL_64_after_hwframe+0x65
The cifs filesystem rightfully sets sk_allocations to GFP_NOFS,
we can avoid the nesting using the sk page frag for allocation
lacking the __GFP_FS flag. Do not define an additional mm-helper
for that, as this is strictly tied to the sk page frag usage.
v1 -> v2:
- use a stricted sk_page_frag() check instead of reordering the
code (Eric)
Reported-by: Steffen Froemer <sfroemer@redhat.com>
Fixes: 5640f7685831 ("net: use a per task frag allocator")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current virtgpu implementation of poll(..) drops events
when VIRTGPU_CONTEXT_PARAM_POLL_RINGS_MASK is enabled (otherwise
it's like a normal DRM driver).
This is because paravirtualized userspaces receives responses in a
buffer of type BLOB_MEM_GUEST, not by read(..).
To be in line with other DRM drivers and avoid specialized behavior,
it is possible to define a dummy event for virtgpu. Paravirtualized
userspace will now have to call read(..) on the DRM fd to receive the
dummy event.
Fixes: b10790434cf2 ("drm/virtgpu api: create context init feature")
Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20211122232210.602-2-gurchetansingh@google.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Pull vhost,virtio,vdpa bugfixes from Michael Tsirkin:
"Misc fixes all over the place.
Revert of virtio used length validation series: the approach taken
does not seem to work, breaking too many guests in the process. We'll
need to do length validation using some other approach"
[ This merge also ends up reverting commit f7a36b03a732 ("vsock/virtio:
suppress used length validation"), which came in through the
networking tree in the meantime, and was part of that whole used
length validation series - Linus ]
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa_sim: avoid putting an uninitialized iova_domain
vhost-vdpa: clean irqs before reseting vdpa device
virtio-blk: modify the value type of num in virtio_queue_rq()
vhost/vsock: cleanup removing `len` variable
vhost/vsock: fix incorrect used length reported to the guest
Revert "virtio_ring: validate used buffer length"
Revert "virtio-net: don't let virtio core to validate used length"
Revert "virtio-blk: don't let virtio core to validate used length"
Revert "virtio-scsi: don't let virtio core to validate used buffer length"
|
|
Pull NFS client fixes from Trond Myklebust:
"Highlights include:
Stable fixes:
- NFSv42: Fix pagecache invalidation after COPY/CLONE
Bugfixes:
- NFSv42: Don't fail clone() just because the server failed to return
post-op attributes
- SUNRPC: use different lockdep keys for INET6 and LOCAL
- NFSv4.1: handle NFS4ERR_NOSPC from CREATE_SESSION
- SUNRPC: fix header include guard in trace header"
* tag 'nfs-for-5.16-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: use different lock keys for INET6 and LOCAL
sunrpc: fix header include guard in trace header
NFSv4.1: handle NFS4ERR_NOSPC by CREATE_SESSION
NFSv42: Fix pagecache invalidation after COPY/CLONE
NFS: Add a tracepoint to show the results of nfs_set_cache_invalid()
NFSv42: Don't fail clone() unless the OP_CLONE operation failed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from netfilter.
Current release - regressions:
- r8169: fix incorrect mac address assignment
- vlan: fix underflow for the real_dev refcnt when vlan creation
fails
- smc: avoid warning of possible recursive locking
Current release - new code bugs:
- vsock/virtio: suppress used length validation
- neigh: fix crash in v6 module initialization error path
Previous releases - regressions:
- af_unix: fix change in behavior in read after shutdown
- igb: fix netpoll exit with traffic, avoid warning
- tls: fix splice_read() when starting mid-record
- lan743x: fix deadlock in lan743x_phy_link_status_change()
- marvell: prestera: fix bridge port operation
Previous releases - always broken:
- tcp_cubic: fix spurious Hystart ACK train detections for
not-cwnd-limited flows
- nexthop: fix refcount issues when replacing IPv6 groups
- nexthop: fix null pointer dereference when IPv6 is not enabled
- phylink: force link down and retrigger resolve on interface change
- mptcp: fix delack timer length calculation and incorrect early
clearing
- ieee802154: handle iftypes as u32, prevent shift-out-of-bounds
- nfc: virtual_ncidev: change default device permissions
- netfilter: ctnetlink: fix error codes and flags used for kernel
side filtering of dumps
- netfilter: flowtable: fix IPv6 tunnel addr match
- ncsi: align payload to 32-bit to fix dropped packets
- iavf: fix deadlock and loss of config during VF interface reset
- ice: avoid bpf_prog refcount underflow
- ocelot: fix broken PTP over IP and PTP API violations
Misc:
- marvell: mvpp2: increase MTU limit when XDP enabled"
* tag 'net-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
net: dsa: microchip: implement multi-bridge support
net: mscc: ocelot: correctly report the timestamping RX filters in ethtool
net: mscc: ocelot: set up traps for PTP packets
net: ptp: add a definition for the UDP port for IEEE 1588 general messages
net: mscc: ocelot: create a function that replaces an existing VCAP filter
net: mscc: ocelot: don't downgrade timestamping RX filters in SIOCSHWTSTAMP
net: hns3: fix incorrect components info of ethtool --reset command
net: hns3: fix one incorrect value of page pool info when queried by debugfs
net: hns3: add check NULL address for page pool
net: hns3: fix VF RSS failed problem after PF enable multi-TCs
net: qed: fix the array may be out of bound
net/smc: Don't call clcsock shutdown twice when smc shutdown
net: vlan: fix underflow for the real_dev refcnt
ptp: fix filter names in the documentation
ethtool: ioctl: fix potential NULL deref in ethtool_set_coalesce()
nfc: virtual_ncidev: change default device permissions
net/sched: sch_ets: don't peek at classes beyond 'nbands'
net: stmmac: Disable Tx queues when reconfiguring the interface
selftests: tls: test for correct proto_ops
tls: fix replacing proto_ops
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a NULL pointer dereference in the CPPC library code and a
locking issue related to printing the names of ACPI device nodes in
the device properties framework.
Specifics:
- Fix NULL pointer dereference in the CPPC library code occuring on
hybrid systems without CPPC support (Rafael Wysocki).
- Avoid attempts to acquire a semaphore with interrupts off when
printing the names of ACPI device nodes and clean up code on top of
that fix (Sakari Ailus)"
* tag 'acpi-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: CPPC: Add NULL pointer check to cppc_get_perf()
ACPI: Make acpi_node_get_parent() local
ACPI: Get acpi_device's parent from the parent field
|