| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Patch series "ksm: count allocated rmap_items and update documentation",
v5.
KSM can save memory by merging identical pages, but also can consume
additional memory, because it needs to generate rmap_items to save each
scanned page's brief rmap information.
To determine how beneficial the ksm-policy (like madvise), they are using
brings, so we add a new interface /proc/<pid>/ksm_stat for each process
The value "ksm_rmap_items" in it indicates the total allocated ksm
rmap_items of this process.
The detailed description can be seen in the following patches' commit
message.
This patch (of 2):
KSM can save memory by merging identical pages, but also can consume
additional memory, because it needs to generate rmap_items to save each
scanned page's brief rmap information. Some of these pages may be merged,
but some may not be abled to be merged after being checked several times,
which are unprofitable memory consumed.
The information about whether KSM save memory or consume memory in
system-wide range can be determined by the comprehensive calculation of
pages_sharing, pages_shared, pages_unshared and pages_volatile. A simple
approximate calculation:
profit =~ pages_sharing * sizeof(page) - (all_rmap_items) *
sizeof(rmap_item);
where all_rmap_items equals to the sum of pages_sharing, pages_shared,
pages_unshared and pages_volatile.
But we cannot calculate this kind of ksm profit inner single-process wide
because the information of ksm rmap_item's number of a process is lacked.
For user applications, if this kind of information could be obtained, it
helps upper users know how beneficial the ksm-policy (like madvise) they
are using brings, and then optimize their app code. For example, one
application madvise 1000 pages as MERGEABLE, while only a few pages are
really merged, then it's not cost-efficient.
So we add a new interface /proc/<pid>/ksm_stat for each process in which
the value of ksm_rmap_itmes is only shown now and so more values can be
added in future.
So similarly, we can calculate the ksm profit approximately for a single
process by:
profit =~ ksm_merging_pages * sizeof(page) - ksm_rmap_items *
sizeof(rmap_item);
where ksm_merging_pages is shown at /proc/<pid>/ksm_merging_pages, and
ksm_rmap_items is shown in /proc/<pid>/ksm_stat.
Link: https://lkml.kernel.org/r/20220830143731.299702-1-xu.xin16@zte.com.cn
Link: https://lkml.kernel.org/r/20220830143838.299758-1-xu.xin16@zte.com.cn
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Reviewed-by: Xiaokai Ran <ran.xiaokai@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Izik Eidus <izik.eidus@ravellosystems.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are three users (mmzone.h, memcontrol.h, page_counter.h) using
similar code for forcing cacheline padding between fields of different
structures. Dedup that code.
Link: https://lkml.kernel.org/r/20220826230642.566725-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Suggested-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
While discussing early DMA pool pre-allocation failure with Christoph [1]
I have realized that the allocation failure warning is rather noisy for
constrained allocations like GFP_DMA{32}. Those zones are usually not
populated on all nodes very often as their memory ranges are constrained.
This is an attempt to reduce the ballast that doesn't provide any relevant
information for those allocation failures investigation. Please note that
I have only compile tested it (in my default config setup) and I am
throwing it mostly to see what people think about it.
[1] http://lkml.kernel.org/r/20220817060647.1032426-1-hch@lst.de
[mhocko@suse.com: update]
Link: https://lkml.kernel.org/r/Yw29bmJTIkKogTiW@dhcp22.suse.cz
[mhocko@suse.com: fix build]
[akpm@linux-foundation.org: fix it for mapletree]
[akpm@linux-foundation.org: update it for Michal's update]
[mhocko@suse.com: fix arch/powerpc/xmon/xmon.c]
Link: https://lkml.kernel.org/r/Ywh3C4dKB9B93jIy@dhcp22.suse.cz
[akpm@linux-foundation.org: fix arch/sparc/kernel/setup_32.c]
Link: https://lkml.kernel.org/r/YwScVmVofIZkopkF@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
pte_numa() no longer exists -- replaced by pte_protnone() -- and PROT_NUMA
probably never existed: MM_CP_PROT_NUMA also ends up using PROT_NONE.
Let's fixup the doc.
Link: https://lkml.kernel.org/r/20220825164659.89824-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: minor cleanups around NUMA hinting".
Working on some GUP cleanups (e.g., getting rid of some FOLL_ flags) and
preparing for other GUP changes (getting rid of FOLL_FORCE|FOLL_WRITE for
for taking a R/O longterm pin), this is something I can easily send out
independently.
Get rid of FOLL_NUMA, allow FOLL_FORCE access to PROT_NONE mapped pages in
GUP-fast, and fixup some documentation around NUMA hinting.
This patch (of 3):
No need for a special flag that is not even properly documented to be
internal-only.
Let's just factor this check out and get rid of this flag. The separate
function has the nice benefit that we can centralize comments.
Link: https://lkml.kernel.org/r/20220825164659.89824-2-david@redhat.com
Link: https://lkml.kernel.org/r/20220825164659.89824-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With the last usage of MMF_OOM_VICTIM in exit_mmap gone, this flag is now
unused and can be removed.
[akpm@linux-foundation.org: remove comment about now-removed mm_is_oom_victim()]
Link: https://lkml.kernel.org/r/20220531223100.510392-2-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christian Brauner (Microsoft) <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The primary reason to invoke the oom reaper from the exit_mmap path used
to be a prevention of an excessive oom killing if the oom victim exit
races with the oom reaper (see [1] for more details). The invocation has
moved around since then because of the interaction with the munlock logic
but the underlying reason has remained the same (see [2]).
Munlock code is no longer a problem since [3] and there shouldn't be any
blocking operation before the memory is unmapped by exit_mmap so the oom
reaper invocation can be dropped. The unmapping part can be done with the
non-exclusive mmap_sem and the exclusive one is only required when page
tables are freed.
Remove the oom_reaper from exit_mmap which will make the code easier to
read. This is really unlikely to make any observable difference although
some microbenchmarks could benefit from one less branch that needs to be
evaluated even though it almost never is true.
[1] 212925802454 ("mm: oom: let oom_reap_task and exit_mmap run concurrently")
[2] 27ae357fa82b ("mm, oom: fix concurrent munlock and oom reaper unmap, v3")
[3] a213e5cf71cb ("mm/munlock: delete munlock_vma_pages_all(), allow oomreap")
[akpm@linux-foundation.org: restore Suren's mmap_read_lock() optimization]
Link: https://lkml.kernel.org/r/20220531223100.510392-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christian Brauner (Microsoft) <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replace any vm_next use with vma_find().
Update free_pgtables(), unmap_vmas(), and zap_page_range() to use the
maple tree.
Use the new free_pgtables() and unmap_vmas() in do_mas_align_munmap(). At
the same time, alter the loop to be more compact.
Now that free_pgtables() and unmap_vmas() take a maple tree as an
argument, rearrange do_mas_align_munmap() to use the new tree to hold the
vmas to remove.
Remove __vma_link_list() and __vma_unlink_list() as they are exclusively
used to update the linked list.
Drop linked list update from __insert_vm_struct().
Rework validation of tree as it was depending on the linked list.
[yang.lee@linux.alibaba.com: fix one kernel-doc comment]
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=1949
Link: https://lkml.kernel.org/r/20220824021918.94116-1-yang.lee@linux.alibaba.comLink: https://lkml.kernel.org/r/20220906194824.2110408-69-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Don't use the mm_struct linked list or the vma->vm_next in prep for
removal.
Link: https://lkml.kernel.org/r/20220906194824.2110408-45-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove __do_munmap() in favour of do_munmap(), do_mas_munmap(), and
do_mas_align_munmap().
do_munmap() is a wrapper to create a maple state for any callers that have
not been converted to the maple tree.
do_mas_munmap() takes a maple state to mumap a range. This is just a
small function which checks for error conditions and aligns the end of the
range.
do_mas_align_munmap() uses the aligned range to mumap a range.
do_mas_align_munmap() starts with the first VMA in the range, then finds
the last VMA in the range. Both start and end are split if necessary.
Then the VMAs are removed from the linked list and the mm mlock count is
updated at the same time. Followed by a single tree operation of
overwriting the area in with a NULL. Finally, the detached list is
unmapped and freed.
By reorganizing the munmap calls as outlined, it is now possible to avoid
extra work of aligning pre-aligned callers which are known to be safe,
avoid extra VMA lookups or tree walks for modifications.
detach_vmas_to_be_unmapped() is no longer used, so drop this code.
vm_brk_flags() can just call the do_mas_munmap() as it checks for
intersecting VMAs directly.
Link: https://lkml.kernel.org/r/20220906194824.2110408-29-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Unlike the rbtree, the Maple Tree will return a NULL if there's nothing at
a particular address.
Since the previous commit dropped the vmacache, it is now possible to
consult the tree directly.
Link: https://lkml.kernel.org/r/20220906194824.2110408-27-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
By using the maple tree and the maple tree state, the vmacache is no
longer beneficial and is complicating the VMA code. Remove the vmacache
to reduce the work in keeping it up to date and code complexity.
Link: https://lkml.kernel.org/r/20220906194824.2110408-26-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move find_vma_intersection() to mmap.c and change implementation to maple
tree.
When searching for a vma within a range, it is easier to use the maple
tree interface.
Exported find_vma_intersection() for kvm module.
Link: https://lkml.kernel.org/r/20220906194824.2110408-24-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use vma_lookup() to walk the tree to the start value requested. If the
vma at the start does not match, then the answer is NULL and there is no
need to look at the next vma the way that find_vma() would.
Link: https://lkml.kernel.org/r/20220906194824.2110408-21-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove the RB tree and start using the maple tree for vm_area_struct
tracking.
Drop validate_mm() calls in expand_upwards() and expand_downwards() as the
lock is not held.
Link: https://lkml.kernel.org/r/20220906194824.2110408-18-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The maple tree was already tracking VMAs in this function by an earlier
commit, but the rbtree iterator was being used to iterate the list.
Change the iterator to use a maple tree native iterator and switch to the
maple tree advanced API to avoid multiple walks of the tree during insert
operations. Unexport the now-unused vma_store() function.
For performance reasons we bulk allocate the maple tree nodes. The node
calculations are done internally to the tree and use the VMA count and
assume the worst-case node requirements. The VM_DONT_COPY flag does not
allow for the most efficient copy method of the tree and so a bulk loading
algorithm is used.
Link: https://lkml.kernel.org/r/20220906194824.2110408-15-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This thin layer of abstraction over the maple tree state is for iterating
over VMAs. You can go forwards, go backwards or ask where the iterator
is. Rename the existing vma_next() to __vma_next() -- it will be removed
by the end of this series.
Link: https://lkml.kernel.org/r/20220906194824.2110408-10-Liam.Howlett@oracle.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Start tracking the VMAs with the new maple tree structure in parallel with
the rb_tree. Add debug and trace events for maple tree operations and
duplicate the rb_tree that is created on forks into the maple tree.
The maple tree is added to the mm_struct including the mm_init struct,
added support in required mm/mmap functions, added tracking in kernel/fork
for process forking, and used to find the unmapped_area and checked
against what the rbtree finds.
This also moves the mmap_lock() in exit_mmap() since the oom reaper call
does walk the VMAs. Otherwise lockdep will be unhappy if oom happens.
When splitting a vma fails due to allocations of the maple tree nodes,
the error path in __split_vma() calls new->vm_ops->close(new). The page
accounting for hugetlb is actually in the close() operation, so it
accounts for the removal of 1/2 of the VMA which was not adjusted. This
results in a negative exit value. To avoid the negative charge, set
vm_start = vm_end and vm_pgoff = 0.
There is also a potential accounting issue in special mappings from
insert_vm_struct() failing to allocate, so reverse the charge there in
the failure scenario.
Link: https://lkml.kernel.org/r/20220906194824.2110408-9-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Introducing the Maple Tree"
The maple tree is an RCU-safe range based B-tree designed to use modern
processor cache efficiently. There are a number of places in the kernel
that a non-overlapping range-based tree would be beneficial, especially
one with a simple interface. If you use an rbtree with other data
structures to improve performance or an interval tree to track
non-overlapping ranges, then this is for you.
The tree has a branching factor of 10 for non-leaf nodes and 16 for leaf
nodes. With the increased branching factor, it is significantly shorter
than the rbtree so it has fewer cache misses. The removal of the linked
list between subsequent entries also reduces the cache misses and the need
to pull in the previous and next VMA during many tree alterations.
The first user that is covered in this patch set is the vm_area_struct,
where three data structures are replaced by the maple tree: the augmented
rbtree, the vma cache, and the linked list of VMAs in the mm_struct. The
long term goal is to reduce or remove the mmap_lock contention.
The plan is to get to the point where we use the maple tree in RCU mode.
Readers will not block for writers. A single write operation will be
allowed at a time. A reader re-walks if stale data is encountered. VMAs
would be RCU enabled and this mode would be entered once multiple tasks
are using the mm_struct.
Davidlor said
: Yes I like the maple tree, and at this stage I don't think we can ask for
: more from this series wrt the MM - albeit there seems to still be some
: folks reporting breakage. Fundamentally I see Liam's work to (re)move
: complexity out of the MM (not to say that the actual maple tree is not
: complex) by consolidating the three complimentary data structures very
: much worth it considering performance does not take a hit. This was very
: much a turn off with the range locking approach, which worst case scenario
: incurred in prohibitive overhead. Also as Liam and Matthew have
: mentioned, RCU opens up a lot of nice performance opportunities, and in
: addition academia[1] has shown outstanding scalability of address spaces
: with the foundation of replacing the locked rbtree with RCU aware trees.
A similar work has been discovered in the academic press
https://pdos.csail.mit.edu/papers/rcuvm:asplos12.pdf
Sheer coincidence. We designed our tree with the intention of solving the
hardest problem first. Upon settling on a b-tree variant and a rough
outline, we researched ranged based b-trees and RCU b-trees and did find
that article. So it was nice to find reassurances that we were on the
right path, but our design choice of using ranges made that paper unusable
for us.
This patch (of 70):
The maple tree is an RCU-safe range based B-tree designed to use modern
processor cache efficiently. There are a number of places in the kernel
that a non-overlapping range-based tree would be beneficial, especially
one with a simple interface. If you use an rbtree with other data
structures to improve performance or an interval tree to track
non-overlapping ranges, then this is for you.
The tree has a branching factor of 10 for non-leaf nodes and 16 for leaf
nodes. With the increased branching factor, it is significantly shorter
than the rbtree so it has fewer cache misses. The removal of the linked
list between subsequent entries also reduces the cache misses and the need
to pull in the previous and next VMA during many tree alterations.
The first user that is covered in this patch set is the vm_area_struct,
where three data structures are replaced by the maple tree: the augmented
rbtree, the vma cache, and the linked list of VMAs in the mm_struct. The
long term goal is to reduce or remove the mmap_lock contention.
The plan is to get to the point where we use the maple tree in RCU mode.
Readers will not block for writers. A single write operation will be
allowed at a time. A reader re-walks if stale data is encountered. VMAs
would be RCU enabled and this mode would be entered once multiple tasks
are using the mm_struct.
There is additional BUG_ON() calls added within the tree, most of which
are in debug code. These will be replaced with a WARN_ON() call in the
future. There is also additional BUG_ON() calls within the code which
will also be reduced in number at a later date. These exist to catch
things such as out-of-range accesses which would crash anyways.
Link: https://lkml.kernel.org/r/20220906194824.2110408-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20220906194824.2110408-2-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: David Howells <dhowells@redhat.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The most common case for certain node_random usage (demotion nodemask) is
with nodemask weight 1. We can avoid calling get_random_init() in that
case and always return the only node set in the nodemask.
A simple test as below
before = rdtsc_ordered();
for (i= 0; i < 100; i++) {
rand = node_random(&nmask);
}
after = rdtsc_ordered();
Without fix after - before : 16438
With fix after - before : 816
Link: https://lkml.kernel.org/r/20220818131042.113280-11-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Wei Xu <weixugc@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hesham Almatary <hesham.almatary@huawei.com>
Cc: Jagdish Gediya <jvgediya.oss@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With memory tier support we can have memory only NUMA nodes in the top
tier from which we want to avoid promotion tracking NUMA faults. Update
node_is_toptier to work with memory tiers. All NUMA nodes are by default
top tier nodes. With lower(slower) memory tiers added we consider all
memory tiers above a memory tier having CPU NUMA nodes as a top memory
tier
[sj@kernel.org: include missed header file, memory-tiers.h]
Link: https://lkml.kernel.org/r/20220820190720.248704-1-sj@kernel.org
[akpm@linux-foundation.org: mm/memory.c needs linux/memory-tiers.h]
[aneesh.kumar@linux.ibm.com: make toptier_distance inclusive upper bound of toptiers]
Link: https://lkml.kernel.org/r/20220830081457.118960-1-aneesh.kumar@linux.ibm.com
Link: https://lkml.kernel.org/r/20220818131042.113280-10-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Wei Xu <weixugc@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hesham Almatary <hesham.almatary@huawei.com>
Cc: Jagdish Gediya <jvgediya.oss@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, a higher tier node can only be demoted to selected nodes on the
next lower tier as defined by the demotion path. This strict demotion
order does not work in all use cases (e.g. some use cases may want to
allow cross-socket demotion to another node in the same demotion tier as a
fallback when the preferred demotion node is out of space). This demotion
order is also inconsistent with the page allocation fallback order when
all the nodes in a higher tier are out of space: The page allocation can
fall back to any node from any lower tier, whereas the demotion order
doesn't allow that currently.
This patch adds support to get all the allowed demotion targets for a
memory tier. demote_page_list() function is now modified to utilize this
allowed node mask as the fallback allocation mask.
Link: https://lkml.kernel.org/r/20220818131042.113280-9-aneesh.kumar@linux.ibm.com
Signed-off-by: Jagdish Gediya <jvgediya.oss@gmail.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Wei Xu <weixugc@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hesham Almatary <hesham.almatary@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that we track node-specific memtier in pg_data_t, we can drop memtier
from memtype.
Link: https://lkml.kernel.org/r/20220818131042.113280-8-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Wei Xu <weixugc@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hesham Almatary <hesham.almatary@huawei.com>
Cc: Jagdish Gediya <jvgediya.oss@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Also update different helpes to use NODE_DATA()->memtier. Since node
specific memtier can change based on the reassignment of NUMA node to a
different memory tiers, accessing NODE_DATA()->memtier needs to happen
under an rcu read lock or memory_tier_lock.
Link: https://lkml.kernel.org/r/20220818131042.113280-7-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Wei Xu <weixugc@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hesham Almatary <hesham.almatary@huawei.com>
Cc: Jagdish Gediya <jvgediya.oss@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This patch switch the demotion target building logic to use memory tiers
instead of NUMA distance. All N_MEMORY NUMA nodes will be placed in the
default memory tier and additional memory tiers will be added by drivers
like dax kmem.
This patch builds the demotion target for a NUMA node by looking at all
memory tiers below the tier to which the NUMA node belongs. The closest
node in the immediately following memory tier is used as a demotion
target.
Since we are now only building demotion target for N_MEMORY NUMA nodes the
CPU hotplug calls are removed in this patch.
Link: https://lkml.kernel.org/r/20220818131042.113280-6-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Wei Xu <weixugc@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hesham Almatary <hesham.almatary@huawei.com>
Cc: Jagdish Gediya <jvgediya.oss@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
MEMTIER_DEFAULT_DAX_ADISTANCE
By default, all nodes are assigned to the default memory tier which is the
memory tier designated for nodes with DRAM
Set dax kmem device node's tier to slower memory tier by assigning
abstract distance to MEMTIER_DEFAULT_DAX_ADISTANCE. Low-level drivers
like papr_scm or ACPI NFIT can initialize memory device type to a more
accurate value based on device tree details or HMAT. If the kernel
doesn't find the memory type initialized, a default slower memory type is
assigned by the kmem driver.
[aneesh.kumar@linux.ibm.com: assign correct memory type for multiple dax devices with the same node affinity]
Link: https://lkml.kernel.org/r/20220826100224.542312-1-aneesh.kumar@linux.ibm.com
Link: https://lkml.kernel.org/r/20220818131042.113280-5-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Wei Xu <weixugc@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hesham Almatary <hesham.almatary@huawei.com>
Cc: Jagdish Gediya <jvgediya.oss@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If the new NUMA node onlined doesn't have a abstract distance assigned,
the kernel adds the NUMA node to default memory tier.
[aneesh.kumar@linux.ibm.com: fix kernel error with memory hotplug]
Link: https://lkml.kernel.org/r/20220825092019.379069-1-aneesh.kumar@linux.ibm.com
Link: https://lkml.kernel.org/r/20220818131042.113280-4-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Wei Xu <weixugc@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hesham Almatary <hesham.almatary@huawei.com>
Cc: Jagdish Gediya <jvgediya.oss@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This moves memory demotion related code to mm/memory-tiers.c. No
functional change in this patch.
Link: https://lkml.kernel.org/r/20220818131042.113280-3-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Wei Xu <weixugc@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hesham Almatary <hesham.almatary@huawei.com>
Cc: Jagdish Gediya <jvgediya.oss@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/demotion: Memory tiers and demotion", v15.
The current kernel has the basic memory tiering support: Inactive pages on
a higher tier NUMA node can be migrated (demoted) to a lower tier NUMA
node to make room for new allocations on the higher tier NUMA node.
Frequently accessed pages on a lower tier NUMA node can be migrated
(promoted) to a higher tier NUMA node to improve the performance.
In the current kernel, memory tiers are defined implicitly via a demotion
path relationship between NUMA nodes, which is created during the kernel
initialization and updated when a NUMA node is hot-added or hot-removed.
The current implementation puts all nodes with CPU into the highest tier,
and builds the tier hierarchy tier-by-tier by establishing the per-node
demotion targets based on the distances between nodes.
This current memory tier kernel implementation needs to be improved for
several important use cases:
* The current tier initialization code always initializes each
memory-only NUMA node into a lower tier. But a memory-only NUMA node
may have a high performance memory device (e.g. a DRAM-backed
memory-only node on a virtual machine) and that should be put into a
higher tier.
* The current tier hierarchy always puts CPU nodes into the top tier.
But on a system with HBM (e.g. GPU memory) devices, these memory-only
HBM NUMA nodes should be in the top tier, and DRAM nodes with CPUs are
better to be placed into the next lower tier.
* Also because the current tier hierarchy always puts CPU nodes into the
top tier, when a CPU is hot-added (or hot-removed) and triggers a memory
node from CPU-less into a CPU node (or vice versa), the memory tier
hierarchy gets changed, even though no memory node is added or removed.
This can make the tier hierarchy unstable and make it difficult to
support tier-based memory accounting.
* A higher tier node can only be demoted to nodes with shortest distance
on the next lower tier as defined by the demotion path, not any other
node from any lower tier. This strict, demotion order does not work in
all use cases (e.g. some use cases may want to allow cross-socket
demotion to another node in the same demotion tier as a fallback when
the preferred demotion node is out of space), and has resulted in the
feature request for an interface to override the system-wide, per-node
demotion order from the userspace. This demotion order is also
inconsistent with the page allocation fallback order when all the nodes
in a higher tier are out of space: The page allocation can fall back to
any node from any lower tier, whereas the demotion order doesn't allow
that.
This patch series make the creation of memory tiers explicit under the
control of device driver.
Memory Tier Initialization
==========================
Linux kernel presents memory devices as NUMA nodes and each memory device
is of a specific type. The memory type of a device is represented by its
abstract distance. A memory tier corresponds to a range of abstract
distance. This allows for classifying memory devices with a specific
performance range into a memory tier.
By default, all memory nodes are assigned to the default tier with
abstract distance 512.
A device driver can move its memory nodes from the default tier. For
example, PMEM can move its memory nodes below the default tier, whereas
GPU can move its memory nodes above the default tier.
The kernel initialization code makes the decision on which exact tier a
memory node should be assigned to based on the requests from the device
drivers as well as the memory device hardware information provided by the
firmware.
Hot-adding/removing CPUs doesn't affect memory tier hierarchy.
This patch (of 10):
In the current kernel, memory tiers are defined implicitly via a demotion
path relationship between NUMA nodes, which is created during the kernel
initialization and updated when a NUMA node is hot-added or hot-removed.
The current implementation puts all nodes with CPU into the highest tier,
and builds the tier hierarchy by establishing the per-node demotion
targets based on the distances between nodes.
This current memory tier kernel implementation needs to be improved for
several important use cases,
The current tier initialization code always initializes each memory-only
NUMA node into a lower tier. But a memory-only NUMA node may have a high
performance memory device (e.g. a DRAM-backed memory-only node on a
virtual machine) that should be put into a higher tier.
The current tier hierarchy always puts CPU nodes into the top tier. But
on a system with HBM or GPU devices, the memory-only NUMA nodes mapping
these devices should be in the top tier, and DRAM nodes with CPUs are
better to be placed into the next lower tier.
With current kernel higher tier node can only be demoted to nodes with
shortest distance on the next lower tier as defined by the demotion path,
not any other node from any lower tier. This strict, demotion order does
not work in all use cases (e.g. some use cases may want to allow
cross-socket demotion to another node in the same demotion tier as a
fallback when the preferred demotion node is out of space), This demotion
order is also inconsistent with the page allocation fallback order when
all the nodes in a higher tier are out of space: The page allocation can
fall back to any node from any lower tier, whereas the demotion order
doesn't allow that.
This patch series address the above by defining memory tiers explicitly.
Linux kernel presents memory devices as NUMA nodes and each memory device
is of a specific type. The memory type of a device is represented by its
abstract distance. A memory tier corresponds to a range of abstract
distance. This allows for classifying memory devices with a specific
performance range into a memory tier.
This patch configures the range/chunk size to be 128. The default DRAM
abstract distance is 512. We can have 4 memory tiers below the default
DRAM with abstract distance range 0 - 127, 127 - 255, 256- 383, 384 - 511.
Faster memory devices can be placed in these faster(higher) memory tiers.
Slower memory devices like persistent memory will have abstract distance
higher than the default DRAM level.
[akpm@linux-foundation.org: fix comment, per Aneesh]
Link: https://lkml.kernel.org/r/20220818131042.113280-1-aneesh.kumar@linux.ibm.com
Link: https://lkml.kernel.org/r/20220818131042.113280-2-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Wei Xu <weixugc@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hesham Almatary <hesham.almatary@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Jagdish Gediya <jvgediya.oss@gmail.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add /sys/kernel/debug/lru_gen for working set estimation and proactive
reclaim. These techniques are commonly used to optimize job scheduling
(bin packing) in data centers [1][2].
Compared with the page table-based approach and the PFN-based
approach, this lruvec-based approach has the following advantages:
1. It offers better choices because it is aware of memcgs, NUMA nodes,
shared mappings and unmapped page cache.
2. It is more scalable because it is O(nr_hot_pages), whereas the
PFN-based approach is O(nr_total_pages).
Add /sys/kernel/debug/lru_gen_full for debugging.
[1] https://dl.acm.org/doi/10.1145/3297858.3304053
[2] https://dl.acm.org/doi/10.1145/3503222.3507731
Link: https://lkml.kernel.org/r/20220918080010.2920238-13-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add /sys/kernel/mm/lru_gen/min_ttl_ms for thrashing prevention, as
requested by many desktop users [1].
When set to value N, it prevents the working set of N milliseconds from
getting evicted. The OOM killer is triggered if this working set cannot
be kept in memory. Based on the average human detectable lag (~100ms),
N=1000 usually eliminates intolerable lags due to thrashing. Larger
values like N=3000 make lags less noticeable at the risk of premature OOM
kills.
Compared with the size-based approach [2], this time-based approach
has the following advantages:
1. It is easier to configure because it is agnostic to applications
and memory sizes.
2. It is more reliable because it is directly wired to the OOM killer.
[1] https://lore.kernel.org/r/Ydza%2FzXKY9ATRoh6@google.com/
[2] https://lore.kernel.org/r/20101028191523.GA14972@google.com/
Link: https://lkml.kernel.org/r/20220918080010.2920238-12-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add /sys/kernel/mm/lru_gen/enabled as a kill switch. Components that
can be disabled include:
0x0001: the multi-gen LRU core
0x0002: walking page table, when arch_has_hw_pte_young() returns
true
0x0004: clearing the accessed bit in non-leaf PMD entries, when
CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y
[yYnN]: apply to all the components above
E.g.,
echo y >/sys/kernel/mm/lru_gen/enabled
cat /sys/kernel/mm/lru_gen/enabled
0x0007
echo 5 >/sys/kernel/mm/lru_gen/enabled
cat /sys/kernel/mm/lru_gen/enabled
0x0005
NB: the page table walks happen on the scale of seconds under heavy memory
pressure, in which case the mmap_lock contention is a lesser concern,
compared with the LRU lock contention and the I/O congestion. So far the
only well-known case of the mmap_lock contention happens on Android, due
to Scudo [1] which allocates several thousand VMAs for merely a few
hundred MBs. The SPF and the Maple Tree also have provided their own
assessments [2][3]. However, if walking page tables does worsen the
mmap_lock contention, the kill switch can be used to disable it. In this
case the multi-gen LRU will suffer a minor performance degradation, as
shown previously.
Clearing the accessed bit in non-leaf PMD entries can also be disabled,
since this behavior was not tested on x86 varieties other than Intel and
AMD.
[1] https://source.android.com/devices/tech/debug/scudo
[2] https://lore.kernel.org/r/20220128131006.67712-1-michel@lespinasse.org/
[3] https://lore.kernel.org/r/20220426150616.3937571-1-Liam.Howlett@oracle.com/
Link: https://lkml.kernel.org/r/20220918080010.2920238-11-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
To further exploit spatial locality, the aging prefers to walk page tables
to search for young PTEs and promote hot pages. A kill switch will be
added in the next patch to disable this behavior. When disabled, the
aging relies on the rmap only.
NB: this behavior has nothing similar with the page table scanning in the
2.4 kernel [1], which searches page tables for old PTEs, adds cold pages
to swapcache and unmaps them.
To avoid confusion, the term "iteration" specifically means the traversal
of an entire mm_struct list; the term "walk" will be applied to page
tables and the rmap, as usual.
An mm_struct list is maintained for each memcg, and an mm_struct follows
its owner task to the new memcg when this task is migrated. Given an
lruvec, the aging iterates lruvec_memcg()->mm_list and calls
walk_page_range() with each mm_struct on this list to promote hot pages
before it increments max_seq.
When multiple page table walkers iterate the same list, each of them gets
a unique mm_struct; therefore they can run concurrently. Page table
walkers ignore any misplaced pages, e.g., if an mm_struct was migrated,
pages it left in the previous memcg will not be promoted when its current
memcg is under reclaim. Similarly, page table walkers will not promote
pages from nodes other than the one under reclaim.
This patch uses the following optimizations when walking page tables:
1. It tracks the usage of mm_struct's between context switches so that
page table walkers can skip processes that have been sleeping since
the last iteration.
2. It uses generational Bloom filters to record populated branches so
that page table walkers can reduce their search space based on the
query results, e.g., to skip page tables containing mostly holes or
misplaced pages.
3. It takes advantage of the accessed bit in non-leaf PMD entries when
CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y.
4. It does not zigzag between a PGD table and the same PMD table
spanning multiple VMAs. IOW, it finishes all the VMAs within the
range of the same PMD table before it returns to a PGD table. This
improves the cache performance for workloads that have large
numbers of tiny VMAs [2], especially when CONFIG_PGTABLE_LEVELS=5.
Server benchmark results:
Single workload:
fio (buffered I/O): no change
Single workload:
memcached (anon): +[8, 10]%
Ops/sec KB/sec
patch1-7: 1147696.57 44640.29
patch1-8: 1245274.91 48435.66
Configurations:
no change
Client benchmark results:
kswapd profiles:
patch1-7
48.16% lzo1x_1_do_compress (real work)
8.20% page_vma_mapped_walk (overhead)
7.06% _raw_spin_unlock_irq
2.92% ptep_clear_flush
2.53% __zram_bvec_write
2.11% do_raw_spin_lock
2.02% memmove
1.93% lru_gen_look_around
1.56% free_unref_page_list
1.40% memset
patch1-8
49.44% lzo1x_1_do_compress (real work)
6.19% page_vma_mapped_walk (overhead)
5.97% _raw_spin_unlock_irq
3.13% get_pfn_folio
2.85% ptep_clear_flush
2.42% __zram_bvec_write
2.08% do_raw_spin_lock
1.92% memmove
1.44% alloc_zspage
1.36% memset
Configurations:
no change
Thanks to the following developers for their efforts [3].
kernel test robot <lkp@intel.com>
[1] https://lwn.net/Articles/23732/
[2] https://llvm.org/docs/ScudoHardenedAllocator.html
[3] https://lore.kernel.org/r/202204160827.ekEARWQo-lkp@intel.com/
Link: https://lkml.kernel.org/r/20220918080010.2920238-9-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Searching the rmap for PTEs mapping each page on an LRU list (to test and
clear the accessed bit) can be expensive because pages from different VMAs
(PA space) are not cache friendly to the rmap (VA space). For workloads
mostly using mapped pages, searching the rmap can incur the highest CPU
cost in the reclaim path.
This patch exploits spatial locality to reduce the trips into the rmap.
When shrink_page_list() walks the rmap and finds a young PTE, a new
function lru_gen_look_around() scans at most BITS_PER_LONG-1 adjacent
PTEs. On finding another young PTE, it clears the accessed bit and
updates the gen counter of the page mapped by this PTE to
(max_seq%MAX_NR_GENS)+1.
Server benchmark results:
Single workload:
fio (buffered I/O): no change
Single workload:
memcached (anon): +[3, 5]%
Ops/sec KB/sec
patch1-6: 1106168.46 43025.04
patch1-7: 1147696.57 44640.29
Configurations:
no change
Client benchmark results:
kswapd profiles:
patch1-6
39.03% lzo1x_1_do_compress (real work)
18.47% page_vma_mapped_walk (overhead)
6.74% _raw_spin_unlock_irq
3.97% do_raw_spin_lock
2.49% ptep_clear_flush
2.48% anon_vma_interval_tree_iter_first
1.92% folio_referenced_one
1.88% __zram_bvec_write
1.48% memmove
1.31% vma_interval_tree_iter_next
patch1-7
48.16% lzo1x_1_do_compress (real work)
8.20% page_vma_mapped_walk (overhead)
7.06% _raw_spin_unlock_irq
2.92% ptep_clear_flush
2.53% __zram_bvec_write
2.11% do_raw_spin_lock
2.02% memmove
1.93% lru_gen_look_around
1.56% free_unref_page_list
1.40% memset
Configurations:
no change
Link: https://lkml.kernel.org/r/20220918080010.2920238-8-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Barry Song <baohua@kernel.org>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
To avoid confusion, the terms "promotion" and "demotion" will be applied
to the multi-gen LRU, as a new convention; the terms "activation" and
"deactivation" will be applied to the active/inactive LRU, as usual.
The aging produces young generations. Given an lruvec, it increments
max_seq when max_seq-min_seq+1 approaches MIN_NR_GENS. The aging promotes
hot pages to the youngest generation when it finds them accessed through
page tables; the demotion of cold pages happens consequently when it
increments max_seq. Promotion in the aging path does not involve any LRU
list operations, only the updates of the gen counter and
lrugen->nr_pages[]; demotion, unless as the result of the increment of
max_seq, requires LRU list operations, e.g., lru_deactivate_fn(). The
aging has the complexity O(nr_hot_pages), since it is only interested in
hot pages.
The eviction consumes old generations. Given an lruvec, it increments
min_seq when lrugen->lists[] indexed by min_seq%MAX_NR_GENS becomes empty.
A feedback loop modeled after the PID controller monitors refaults over
anon and file types and decides which type to evict when both types are
available from the same generation.
The protection of pages accessed multiple times through file descriptors
takes place in the eviction path. Each generation is divided into
multiple tiers. A page accessed N times through file descriptors is in
tier order_base_2(N). Tiers do not have dedicated lrugen->lists[], only
bits in folio->flags. The aforementioned feedback loop also monitors
refaults over all tiers and decides when to protect pages in which tiers
(N>1), using the first tier (N=0,1) as a baseline. The first tier
contains single-use unmapped clean pages, which are most likely the best
choices. In contrast to promotion in the aging path, the protection of a
page in the eviction path is achieved by moving this page to the next
generation, i.e., min_seq+1, if the feedback loop decides so. This
approach has the following advantages:
1. It removes the cost of activation in the buffered access path by
inferring whether pages accessed multiple times through file
descriptors are statistically hot and thus worth protecting in the
eviction path.
2. It takes pages accessed through page tables into account and avoids
overprotecting pages accessed multiple times through file
descriptors. (Pages accessed through page tables are in the first
tier, since N=0.)
3. More tiers provide better protection for pages accessed more than
twice through file descriptors, when under heavy buffered I/O
workloads.
Server benchmark results:
Single workload:
fio (buffered I/O): +[30, 32]%
IOPS BW
5.19-rc1: 2673k 10.2GiB/s
patch1-6: 3491k 13.3GiB/s
Single workload:
memcached (anon): -[4, 6]%
Ops/sec KB/sec
5.19-rc1: 1161501.04 45177.25
patch1-6: 1106168.46 43025.04
Configurations:
CPU: two Xeon 6154
Mem: total 256G
Node 1 was only used as a ram disk to reduce the variance in the
results.
patch drivers/block/brd.c <<EOF
99,100c99,100
< gfp_flags = GFP_NOIO | __GFP_ZERO | __GFP_HIGHMEM;
< page = alloc_page(gfp_flags);
---
> gfp_flags = GFP_NOIO | __GFP_ZERO | __GFP_HIGHMEM | __GFP_THISNODE;
> page = alloc_pages_node(1, gfp_flags, 0);
EOF
cat >>/etc/systemd/system.conf <<EOF
CPUAffinity=numa
NUMAPolicy=bind
NUMAMask=0
EOF
cat >>/etc/memcached.conf <<EOF
-m 184320
-s /var/run/memcached/memcached.sock
-a 0766
-t 36
-B binary
EOF
cat fio.sh
modprobe brd rd_nr=1 rd_size=113246208
swapoff -a
mkfs.ext4 /dev/ram0
mount -t ext4 /dev/ram0 /mnt
mkdir /sys/fs/cgroup/user.slice/test
echo 38654705664 >/sys/fs/cgroup/user.slice/test/memory.max
echo $$ >/sys/fs/cgroup/user.slice/test/cgroup.procs
fio -name=mglru --numjobs=72 --directory=/mnt --size=1408m \
--buffered=1 --ioengine=io_uring --iodepth=128 \
--iodepth_batch_submit=32 --iodepth_batch_complete=32 \
--rw=randread --random_distribution=random --norandommap \
--time_based --ramp_time=10m --runtime=5m --group_reporting
cat memcached.sh
modprobe brd rd_nr=1 rd_size=113246208
swapoff -a
mkswap /dev/ram0
swapon /dev/ram0
memtier_benchmark -S /var/run/memcached/memcached.sock \
-P memcache_binary -n allkeys --key-minimum=1 \
--key-maximum=65000000 --key-pattern=P:P -c 1 -t 36 \
--ratio 1:0 --pipeline 8 -d 2000
memtier_benchmark -S /var/run/memcached/memcached.sock \
-P memcache_binary -n allkeys --key-minimum=1 \
--key-maximum=65000000 --key-pattern=R:R -c 1 -t 36 \
--ratio 0:1 --pipeline 8 --randomize --distinct-client-seed
Client benchmark results:
kswapd profiles:
5.19-rc1
40.33% page_vma_mapped_walk (overhead)
21.80% lzo1x_1_do_compress (real work)
7.53% do_raw_spin_lock
3.95% _raw_spin_unlock_irq
2.52% vma_interval_tree_iter_next
2.37% folio_referenced_one
2.28% vma_interval_tree_subtree_search
1.97% anon_vma_interval_tree_iter_first
1.60% ptep_clear_flush
1.06% __zram_bvec_write
patch1-6
39.03% lzo1x_1_do_compress (real work)
18.47% page_vma_mapped_walk (overhead)
6.74% _raw_spin_unlock_irq
3.97% do_raw_spin_lock
2.49% ptep_clear_flush
2.48% anon_vma_interval_tree_iter_first
1.92% folio_referenced_one
1.88% __zram_bvec_write
1.48% memmove
1.31% vma_interval_tree_iter_next
Configurations:
CPU: single Snapdragon 7c
Mem: total 4G
ChromeOS MemoryPressure [1]
[1] https://chromium.googlesource.com/chromiumos/platform/tast-tests/
Link: https://lkml.kernel.org/r/20220918080010.2920238-7-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Evictable pages are divided into multiple generations for each lruvec.
The youngest generation number is stored in lrugen->max_seq for both
anon and file types as they are aged on an equal footing. The oldest
generation numbers are stored in lrugen->min_seq[] separately for anon
and file types as clean file pages can be evicted regardless of swap
constraints. These three variables are monotonically increasing.
Generation numbers are truncated into order_base_2(MAX_NR_GENS+1) bits
in order to fit into the gen counter in folio->flags. Each truncated
generation number is an index to lrugen->lists[]. The sliding window
technique is used to track at least MIN_NR_GENS and at most
MAX_NR_GENS generations. The gen counter stores a value within [1,
MAX_NR_GENS] while a page is on one of lrugen->lists[]. Otherwise it
stores 0.
There are two conceptually independent procedures: "the aging", which
produces young generations, and "the eviction", which consumes old
generations. They form a closed-loop system, i.e., "the page reclaim".
Both procedures can be invoked from userspace for the purposes of working
set estimation and proactive reclaim. These techniques are commonly used
to optimize job scheduling (bin packing) in data centers [1][2].
To avoid confusion, the terms "hot" and "cold" will be applied to the
multi-gen LRU, as a new convention; the terms "active" and "inactive" will
be applied to the active/inactive LRU, as usual.
The protection of hot pages and the selection of cold pages are based
on page access channels and patterns. There are two access channels:
one through page tables and the other through file descriptors. The
protection of the former channel is by design stronger because:
1. The uncertainty in determining the access patterns of the former
channel is higher due to the approximation of the accessed bit.
2. The cost of evicting the former channel is higher due to the TLB
flushes required and the likelihood of encountering the dirty bit.
3. The penalty of underprotecting the former channel is higher because
applications usually do not prepare themselves for major page
faults like they do for blocked I/O. E.g., GUI applications
commonly use dedicated I/O threads to avoid blocking rendering
threads.
There are also two access patterns: one with temporal locality and the
other without. For the reasons listed above, the former channel is
assumed to follow the former pattern unless VM_SEQ_READ or VM_RAND_READ is
present; the latter channel is assumed to follow the latter pattern unless
outlying refaults have been observed [3][4].
The next patch will address the "outlying refaults". Three macros, i.e.,
LRU_REFS_WIDTH, LRU_REFS_PGOFF and LRU_REFS_MASK, used later are added in
this patch to make the entire patchset less diffy.
A page is added to the youngest generation on faulting. The aging needs
to check the accessed bit at least twice before handing this page over to
the eviction. The first check takes care of the accessed bit set on the
initial fault; the second check makes sure this page has not been used
since then. This protocol, AKA second chance, requires a minimum of two
generations, hence MIN_NR_GENS.
[1] https://dl.acm.org/doi/10.1145/3297858.3304053
[2] https://dl.acm.org/doi/10.1145/3503222.3507731
[3] https://lwn.net/Articles/495543/
[4] https://lwn.net/Articles/815342/
Link: https://lkml.kernel.org/r/20220918080010.2920238-6-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
caller"
This patch undoes the following refactor: commit 289ccba18af4
("include/linux/mm_inline.h: fold __update_lru_size() into its sole
caller")
The upcoming changes to include/linux/mm_inline.h will reuse
__update_lru_size().
Link: https://lkml.kernel.org/r/20220918080010.2920238-5-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Some architectures support the accessed bit in non-leaf PMD entries, e.g.,
x86 sets the accessed bit in a non-leaf PMD entry when using it as part of
linear address translation [1]. Page table walkers that clear the
accessed bit may use this capability to reduce their search space.
Note that:
1. Although an inline function is preferable, this capability is added
as a configuration option for consistency with the existing macros.
2. Due to the little interest in other varieties, this capability was
only tested on Intel and AMD CPUs.
Thanks to the following developers for their efforts [2][3].
Randy Dunlap <rdunlap@infradead.org>
Stephen Rothwell <sfr@canb.auug.org.au>
[1]: Intel 64 and IA-32 Architectures Software Developer's Manual
Volume 3 (June 2021), section 4.8
[2] https://lore.kernel.org/r/bfdcc7c8-922f-61a9-aa15-7e7250f04af7@infradead.org/
[3] https://lore.kernel.org/r/20220413151513.5a0d7a7e@canb.auug.org.au/
Link: https://lkml.kernel.org/r/20220918080010.2920238-3-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Multi-Gen LRU Framework", v14.
What's new
==========
1. OpenWrt, in addition to Android, Arch Linux Zen, Armbian, ChromeOS,
Liquorix, post-factum and XanMod, is now shipping MGLRU on 5.15.
2. Fixed long-tailed direct reclaim latency seen on high-memory (TBs)
machines. The old direct reclaim backoff, which tries to enforce a
minimum fairness among all eligible memcgs, over-swapped by about
(total_mem>>DEF_PRIORITY)-nr_to_reclaim. The new backoff, which
pulls the plug on swapping once the target is met, trades some
fairness for curtailed latency:
https://lore.kernel.org/r/20220918080010.2920238-10-yuzhao@google.com/
3. Fixed minior build warnings and conflicts. More comments and nits.
TLDR
====
The current page reclaim is too expensive in terms of CPU usage and it
often makes poor choices about what to evict. This patchset offers an
alternative solution that is performant, versatile and
straightforward.
Patchset overview
=================
The design and implementation overview is in patch 14:
https://lore.kernel.org/r/20220918080010.2920238-15-yuzhao@google.com/
01. mm: x86, arm64: add arch_has_hw_pte_young()
02. mm: x86: add CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG
Take advantage of hardware features when trying to clear the accessed
bit in many PTEs.
03. mm/vmscan.c: refactor shrink_node()
04. Revert "include/linux/mm_inline.h: fold __update_lru_size() into
its sole caller"
Minor refactors to improve readability for the following patches.
05. mm: multi-gen LRU: groundwork
Adds the basic data structure and the functions that insert pages to
and remove pages from the multi-gen LRU (MGLRU) lists.
06. mm: multi-gen LRU: minimal implementation
A minimal implementation without optimizations.
07. mm: multi-gen LRU: exploit locality in rmap
Exploits spatial locality to improve efficiency when using the rmap.
08. mm: multi-gen LRU: support page table walks
Further exploits spatial locality by optionally scanning page tables.
09. mm: multi-gen LRU: optimize multiple memcgs
Optimizes the overall performance for multiple memcgs running mixed
types of workloads.
10. mm: multi-gen LRU: kill switch
Adds a kill switch to enable or disable MGLRU at runtime.
11. mm: multi-gen LRU: thrashing prevention
12. mm: multi-gen LRU: debugfs interface
Provide userspace with features like thrashing prevention, working set
estimation and proactive reclaim.
13. mm: multi-gen LRU: admin guide
14. mm: multi-gen LRU: design doc
Add an admin guide and a design doc.
Benchmark results
=================
Independent lab results
-----------------------
Based on the popularity of searches [01] and the memory usage in
Google's public cloud, the most popular open-source memory-hungry
applications, in alphabetical order, are:
Apache Cassandra Memcached
Apache Hadoop MongoDB
Apache Spark PostgreSQL
MariaDB (MySQL) Redis
An independent lab evaluated MGLRU with the most widely used benchmark
suites for the above applications. They posted 960 data points along
with kernel metrics and perf profiles collected over more than 500
hours of total benchmark time. Their final reports show that, with 95%
confidence intervals (CIs), the above applications all performed
significantly better for at least part of their benchmark matrices.
On 5.14:
1. Apache Spark [02] took 95% CIs [9.28, 11.19]% and [12.20, 14.93]%
less wall time to sort three billion random integers, respectively,
under the medium- and the high-concurrency conditions, when
overcommitting memory. There were no statistically significant
changes in wall time for the rest of the benchmark matrix.
2. MariaDB [03] achieved 95% CIs [5.24, 10.71]% and [20.22, 25.97]%
more transactions per minute (TPM), respectively, under the medium-
and the high-concurrency conditions, when overcommitting memory.
There were no statistically significant changes in TPM for the rest
of the benchmark matrix.
3. Memcached [04] achieved 95% CIs [23.54, 32.25]%, [20.76, 41.61]%
and [21.59, 30.02]% more operations per second (OPS), respectively,
for sequential access, random access and Gaussian (distribution)
access, when THP=always; 95% CIs [13.85, 15.97]% and
[23.94, 29.92]% more OPS, respectively, for random access and
Gaussian access, when THP=never. There were no statistically
significant changes in OPS for the rest of the benchmark matrix.
4. MongoDB [05] achieved 95% CIs [2.23, 3.44]%, [6.97, 9.73]% and
[2.16, 3.55]% more operations per second (OPS), respectively, for
exponential (distribution) access, random access and Zipfian
(distribution) access, when underutilizing memory; 95% CIs
[8.83, 10.03]%, [21.12, 23.14]% and [5.53, 6.46]% more OPS,
respectively, for exponential access, random access and Zipfian
access, when overcommitting memory.
On 5.15:
5. Apache Cassandra [06] achieved 95% CIs [1.06, 4.10]%, [1.94, 5.43]%
and [4.11, 7.50]% more operations per second (OPS), respectively,
for exponential (distribution) access, random access and Zipfian
(distribution) access, when swap was off; 95% CIs [0.50, 2.60]%,
[6.51, 8.77]% and [3.29, 6.75]% more OPS, respectively, for
exponential access, random access and Zipfian access, when swap was
on.
6. Apache Hadoop [07] took 95% CIs [5.31, 9.69]% and [2.02, 7.86]%
less average wall time to finish twelve parallel TeraSort jobs,
respectively, under the medium- and the high-concurrency
conditions, when swap was on. There were no statistically
significant changes in average wall time for the rest of the
benchmark matrix.
7. PostgreSQL [08] achieved 95% CI [1.75, 6.42]% more transactions per
minute (TPM) under the high-concurrency condition, when swap was
off; 95% CIs [12.82, 18.69]% and [22.70, 46.86]% more TPM,
respectively, under the medium- and the high-concurrency
conditions, when swap was on. There were no statistically
significant changes in TPM for the rest of the benchmark matrix.
8. Redis [09] achieved 95% CIs [0.58, 5.94]%, [6.55, 14.58]% and
[11.47, 19.36]% more total operations per second (OPS),
respectively, for sequential access, random access and Gaussian
(distribution) access, when THP=always; 95% CIs [1.27, 3.54]%,
[10.11, 14.81]% and [8.75, 13.64]% more total OPS, respectively,
for sequential access, random access and Gaussian access, when
THP=never.
Our lab results
---------------
To supplement the above results, we ran the following benchmark suites
on 5.16-rc7 and found no regressions [10].
fs_fio_bench_hdd_mq pft
fs_lmbench pgsql-hammerdb
fs_parallelio redis
fs_postmark stream
hackbench sysbenchthread
kernbench tpcc_spark
memcached unixbench
multichase vm-scalability
mutilate will-it-scale
nginx
[01] https://trends.google.com
[02] https://lore.kernel.org/r/20211102002002.92051-1-bot@edi.works/
[03] https://lore.kernel.org/r/20211009054315.47073-1-bot@edi.works/
[04] https://lore.kernel.org/r/20211021194103.65648-1-bot@edi.works/
[05] https://lore.kernel.org/r/20211109021346.50266-1-bot@edi.works/
[06] https://lore.kernel.org/r/20211202062806.80365-1-bot@edi.works/
[07] https://lore.kernel.org/r/20211209072416.33606-1-bot@edi.works/
[08] https://lore.kernel.org/r/20211218071041.24077-1-bot@edi.works/
[09] https://lore.kernel.org/r/20211122053248.57311-1-bot@edi.works/
[10] https://lore.kernel.org/r/20220104202247.2903702-1-yuzhao@google.com/
Read-world applications
=======================
Third-party testimonials
------------------------
Konstantin reported [11]:
I have Archlinux with 8G RAM + zswap + swap. While developing, I
have lots of apps opened such as multiple LSP-servers for different
langs, chats, two browsers, etc... Usually, my system gets quickly
to a point of SWAP-storms, where I have to kill LSP-servers,
restart browsers to free memory, etc, otherwise the system lags
heavily and is barely usable.
1.5 day ago I migrated from 5.11.15 kernel to 5.12 + the LRU
patchset, and I started up by opening lots of apps to create memory
pressure, and worked for a day like this. Till now I had not a
single SWAP-storm, and mind you I got 3.4G in SWAP. I was never
getting to the point of 3G in SWAP before without a single
SWAP-storm.
Vaibhav from IBM reported [12]:
In a synthetic MongoDB Benchmark, seeing an average of ~19%
throughput improvement on POWER10(Radix MMU + 64K Page Size) with
MGLRU patches on top of 5.16 kernel for MongoDB + YCSB across
three different request distributions, namely, Exponential, Uniform
and Zipfan.
Shuang from U of Rochester reported [13]:
With the MGLRU, fio achieved 95% CIs [38.95, 40.26]%, [4.12, 6.64]%
and [9.26, 10.36]% higher throughput, respectively, for random
access, Zipfian (distribution) access and Gaussian (distribution)
access, when the average number of jobs per CPU is 1; 95% CIs
[42.32, 49.15]%, [9.44, 9.89]% and [20.99, 22.86]% higher
throughput, respectively, for random access, Zipfian access and
Gaussian access, when the average number of jobs per CPU is 2.
Daniel from Michigan Tech reported [14]:
With Memcached allocating ~100GB of byte-addressable Optante,
performance improvement in terms of throughput (measured as queries
per second) was about 10% for a series of workloads.
Large-scale deployments
-----------------------
We've rolled out MGLRU to tens of millions of ChromeOS users and
about a million Android users. Google's fleetwide profiling [15] shows
an overall 40% decrease in kswapd CPU usage, in addition to
improvements in other UX metrics, e.g., an 85% decrease in the number
of low-memory kills at the 75th percentile and an 18% decrease in
app launch time at the 50th percentile.
The downstream kernels that have been using MGLRU include:
1. Android [16]
2. Arch Linux Zen [17]
3. Armbian [18]
4. ChromeOS [19]
5. Liquorix [20]
6. OpenWrt [21]
7. post-factum [22]
8. XanMod [23]
[11] https://lore.kernel.org/r/140226722f2032c86301fbd326d91baefe3d7d23.camel@yandex.ru/
[12] https://lore.kernel.org/r/87czj3mux0.fsf@vajain21.in.ibm.com/
[13] https://lore.kernel.org/r/20220105024423.26409-1-szhai2@cs.rochester.edu/
[14] https://lore.kernel.org/r/CA+4-3vksGvKd18FgRinxhqHetBS1hQekJE2gwco8Ja-bJWKtFw@mail.gmail.com/
[15] https://dl.acm.org/doi/10.1145/2749469.2750392
[16] https://android.com
[17] https://archlinux.org
[18] https://armbian.com
[19] https://chromium.org
[20] https://liquorix.net
[21] https://openwrt.org
[22] https://codeberg.org/pf-kernel
[23] https://xanmod.org
Summary
=======
The facts are:
1. The independent lab results and the real-world applications
indicate substantial improvements; there are no known regressions.
2. Thrashing prevention, working set estimation and proactive reclaim
work out of the box; there are no equivalent solutions.
3. There is a lot of new code; no smaller changes have been
demonstrated similar effects.
Our options, accordingly, are:
1. Given the amount of evidence, the reported improvements will likely
materialize for a wide range of workloads.
2. Gauging the interest from the past discussions, the new features
will likely be put to use for both personal computers and data
centers.
3. Based on Google's track record, the new code will likely be well
maintained in the long term. It'd be more difficult if not
impossible to achieve similar effects with other approaches.
This patch (of 14):
Some architectures automatically set the accessed bit in PTEs, e.g., x86
and arm64 v8.2. On architectures that do not have this capability,
clearing the accessed bit in a PTE usually triggers a page fault following
the TLB miss of this PTE (to emulate the accessed bit).
Being aware of this capability can help make better decisions, e.g.,
whether to spread the work out over a period of time to reduce bursty page
faults when trying to clear the accessed bit in many PTEs.
Note that theoretically this capability can be unreliable, e.g.,
hotplugged CPUs might be different from builtin ones. Therefore it should
not be used in architecture-independent code that involves correctness,
e.g., to determine whether TLB flushes are required (in combination with
the accessed bit).
Link: https://lkml.kernel.org/r/20220918080010.2920238-1-yuzhao@google.com
Link: https://lkml.kernel.org/r/20220918080010.2920238-2-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Acked-by: Will Deacon <will@kernel.org>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Once upon a time, we only support accounting thrashing of page cache.
Then Joonsoo introduced workingset detection for anonymous pages and we
gained the ability to account thrashing of them[1].
For page cache thrashing accounting, there is no suitable place to do it
in fs level likes swap_readpage(). So we have to do it in
folio_wait_bit_common().
Then for anonymous pages thrashing accounting, we have to do it in both
swap_readpage() and folio_wait_bit_common(). This likes PSI, so we should
let thrashing accounting supports re-entrance detection.
This patch is to prepare complete thrashing accounting, and is based on
patch "filemap: make the accounting of thrashing more consistent".
[1] commit aae466b0052e ("mm/swap: implement workingset detection for anonymous LRU")
Link: https://lkml.kernel.org/r/20220815071134.74551-1-yang.yang29@zte.com.cn
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Reviewed-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Reviewed-by: wangyong <wang.yong12@zte.com.cn>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Introduce a variable swap_migration_ad_supported to cache whether the arch
supports swap migration A/D bits.
Here one thing to mention is that SWP_MIG_TOTAL_BITS will internally
reference the other macro MAX_PHYSMEM_BITS, which is a function call on
x86 (constant on all the rest of archs).
It's safe to reference it in swapfile_init() because when reaching here
we're already during initcalls level 4 so we must have initialized 5-level
pgtable for x86_64 (right after early_identify_cpu() finishes).
- start_kernel
- setup_arch
- early_cpu_init
- get_cpu_cap --> fetch from CPUID (including X86_FEATURE_LA57)
- early_identify_cpu --> clear X86_FEATURE_LA57 (if early lvl5 not enabled (USE_EARLY_PGTABLE_L5))
- arch_call_rest_init
- rest_init
- kernel_init
- kernel_init_freeable
- do_basic_setup
- do_initcalls --> calls swapfile_init() (initcall level 4)
This should slightly speed up the migration swap entry handlings.
Link: https://lkml.kernel.org/r/20220811161331.37055-8-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We used to have swapfile_maximum_size() fetching a maximum value of
swapfile size per-arch.
As the caller of max_swapfile_size() grows, this patch introduce a
variable "swapfile_maximum_size" and cache the value of old
max_swapfile_size(), so that we don't need to calculate the value every
time.
Caching the value in swapfile_init() is safe because when reaching the
phase we should have initialized all the relevant information. Here the
major arch to take care of is x86, which defines the max swapfile size
based on L1TF mitigation.
Here both X86_BUG_L1TF or l1tf_mitigation should have been setup properly
when reaching swapfile_init(). As a reference, the code path looks like
this for x86:
- start_kernel
- setup_arch
- early_cpu_init
- early_identify_cpu --> setup X86_BUG_L1TF
- parse_early_param
- l1tf_cmdline --> set l1tf_mitigation
- check_bugs
- l1tf_select_mitigation --> set l1tf_mitigation
- arch_call_rest_init
- rest_init
- kernel_init
- kernel_init_freeable
- do_basic_setup
- do_initcalls --> calls swapfile_init() (initcall level 4)
The swapfile size only depends on swp pte format on non-x86 archs, so
caching it is safe too.
Since at it, rename max_swapfile_size() to arch_max_swapfile_size()
because arch can define its own function, so it's more straightforward to
have "arch_" as its prefix. At the meantime, export swapfile_maximum_size
to replace the old usages of max_swapfile_size().
[peterx@redhat.com: declare arch_max_swapfile_size) in swapfile.h]
Link: https://lkml.kernel.org/r/YxTh1GuC6ro5fKL5@xz-m1.local
Link: https://lkml.kernel.org/r/20220811161331.37055-7-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When page migration happens, we always ignore the young/dirty bit settings
in the old pgtable, and marking the page as old in the new page table
using either pte_mkold() or pmd_mkold(), and keeping the pte clean.
That's fine from functional-wise, but that's not friendly to page reclaim
because the moving page can be actively accessed within the procedure.
Not to mention hardware setting the young bit can bring quite some
overhead on some systems, e.g. x86_64 needs a few hundreds nanoseconds to
set the bit. The same slowdown problem to dirty bits when the memory is
first written after page migration happened.
Actually we can easily remember the A/D bit configuration and recover the
information after the page is migrated. To achieve it, define a new set
of bits in the migration swap offset field to cache the A/D bits for old
pte. Then when removing/recovering the migration entry, we can recover
the A/D bits even if the page changed.
One thing to mention is that here we used max_swapfile_size() to detect
how many swp offset bits we have, and we'll only enable this feature if we
know the swp offset is big enough to store both the PFN value and the A/D
bits. Otherwise the A/D bits are dropped like before.
Link: https://lkml.kernel.org/r/20220811161331.37055-6-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We've got a bunch of special swap entries that stores PFN inside the swap
offset fields. To fetch the PFN, normally the user just calls
swp_offset() assuming that'll be the PFN.
Add a helper swp_offset_pfn() to fetch the PFN instead, fetching only the
max possible length of a PFN on the host, meanwhile doing proper check
with MAX_PHYSMEM_BITS to make sure the swap offsets can actually store the
PFNs properly always using the BUILD_BUG_ON() in is_pfn_swap_entry().
One reason to do so is we never tried to sanitize whether swap offset can
really fit for storing PFN. At the meantime, this patch also prepares us
with the future possibility to store more information inside the swp
offset field, so assuming "swp_offset(entry)" to be the PFN will not stand
any more very soon.
Replace many of the swp_offset() callers to use swp_offset_pfn() where
proper. Note that many of the existing users are not candidates for the
replacement, e.g.:
(1) When the swap entry is not a pfn swap entry at all, or,
(2) when we wanna keep the whole swp_offset but only change the swp type.
For the latter, it can happen when fork() triggered on a write-migration
swap entry pte, we may want to only change the migration type from
write->read but keep the rest, so it's not "fetching PFN" but "changing
swap type only". They're left aside so that when there're more
information within the swp offset they'll be carried over naturally in
those cases.
Since at it, dropping hwpoison_entry_to_pfn() because that's exactly what
the new swp_offset_pfn() is about.
Link: https://lkml.kernel.org/r/20220811161331.37055-4-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
swapops.h contains quite a few layers of ifdef, some of the "else" and
"endif" doesn't get proper comment on the macro so it's hard to follow on
what are they referring to. Add the comments.
Link: https://lkml.kernel.org/r/20220811161331.37055-3-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Suggested-by: Nadav Amit <nadav.amit@gmail.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use num_poisoned_pages_sub() to combine multiple atomic ops into one. Also
num_poisoned_pages_dec() can be killed as there's no caller now.
Link: https://lkml.kernel.org/r/20220830123604.25763-4-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
commit 6c287605fd56 ("mm: remember exclusively mapped anonymous pages with
PG_anon_exclusive") made sure that when PageAnonExclusive() has to be
cleared during temporary unmapping of a page, that the PTE is
cleared/invalidated and that the TLB is flushed.
What we want to achieve in all cases is that we cannot end up with a pin on
an anonymous page that may be shared, because such pins would be
unreliable and could result in memory corruptions when the mapped page
and the pin go out of sync due to a write fault.
That TLB flush handling was inspired by an outdated comment in
mm/ksm.c:write_protect_page(), which similarly required the TLB flush in
the past to synchronize with GUP-fast. However, ever since general RCU GUP
fast was introduced in commit 2667f50e8b81 ("mm: introduce a general RCU
get_user_pages_fast()"), a TLB flush is no longer sufficient to handle
concurrent GUP-fast in all cases -- it only handles traditional IPI-based
GUP-fast correctly.
Peter Xu (thankfully) questioned whether that TLB flush is really
required. On architectures that send an IPI broadcast on TLB flush,
it works as expected. To synchronize with RCU GUP-fast properly, we're
conceptually fine, however, we have to enforce a certain memory order and
are missing memory barriers.
Let's document that, avoid the TLB flush where possible and use proper
explicit memory barriers where required. We shouldn't really care about the
additional memory barriers here, as we're not on extremely hot paths --
and we're getting rid of some TLB flushes.
We use a smp_mb() pair for handling concurrent pinning and a
smp_rmb()/smp_wmb() pair for handling the corner case of only temporary
PTE changes but permanent PageAnonExclusive changes.
One extreme example, whereby GUP-fast takes a R/O pin and KSM wants to
convert an exclusive anonymous page to a KSM page, and that page is already
mapped write-protected (-> no PTE change) would be:
Thread 0 (KSM) Thread 1 (GUP-fast)
(B1) Read the PTE
# (B2) skipped without FOLL_WRITE
(A1) Clear PTE
smp_mb()
(A2) Check pinned
(B3) Pin the mapped page
smp_mb()
(A3) Clear PageAnonExclusive
smp_wmb()
(A4) Restore PTE
(B4) Check if the PTE changed
smp_rmb()
(B5) Check PageAnonExclusive
Thread 1 will properly detect that PageAnonExclusive was cleared and
back off.
Note that we don't need a memory barrier between checking if the page is
pinned and clearing PageAnonExclusive, because stores are not
speculated.
The possible issues due to reordering are of theoretical nature so far
and attempts to reproduce the race failed.
Especially the "no PTE change" case isn't the common case, because we'd
need an exclusive anonymous page that's mapped R/O and the PTE is clean
in KSM code -- and using KSM with page pinning isn't extremely common.
Further, the clear+TLB flush we used for now implies a memory barrier.
So the problematic missing part should be the missing memory barrier
after pinning but before checking if the PTE changed.
Link: https://lkml.kernel.org/r/20220901083559.67446-1-david@redhat.com
Fixes: 6c287605fd56 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive")
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Christoph von Recklinghausen <crecklin@redhat.com>
Cc: Don Dutile <ddutile@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "A few cleanup patches for hugetlb", v2.
This series contains a few cleanup patches to use helper functions to
simplify the codes, remove unneeded nid parameter and so on. More
details can be found in the respective changelogs.
This patch (of 10):
Make hugetlb_cma_check() static as it's only used inside mm/hugetlb.c.
Link: https://lkml.kernel.org/r/20220901120030.63318-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20220901120030.63318-2-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
bh_submit_read() has no user anymore, just remove it.
Link: https://lkml.kernel.org/r/20220901133505.2510834-15-yi.zhang@huawei.com
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
