| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We need to prevent that users configure a screen size which is smaller than the
currently selected font size. Otherwise rendering chars on the screen will
access memory outside the graphics memory region.
This patch adds a new function fbcon_modechange_possible() which
implements this check and which later may be extended with other checks
if necessary. The new function is called from the FBIOPUT_VSCREENINFO
ioctl handler in fbmem.c, which will return -EINVAL if userspace asked
for a too small screen size.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v5.4+
|
|
This will allow the trace event to know the full size of the data
intended to be copied and silence read overflow checks.
Reported-by: John Garry <john.garry@huawei.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This became largish as it includes the pending ASoC fixes.
Almost all changes are device-specific small fixes, while many of them
are coverage for mixer issues that were detected by selftest. In
addition, usual suspects for HD/USB-audio are there"
* tag 'sound-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (43 commits)
ALSA: cs46xx: Fix missing snd_card_free() call at probe error
ALSA: usb-audio: Add quirk for Fiero SC-01 (fw v1.0.0)
ALSA: usb-audio: Add quirk for Fiero SC-01
ALSA: hda/realtek: Add quirk for Clevo L140PU
ALSA: usb-audio: Add quirks for MacroSilicon MS2100/MS2106 devices
ASoC: madera: Fix event generation for rate controls
ASoC: madera: Fix event generation for OUT1 demux
ASoC: cs47l15: Fix event generation for low power mux control
ASoC: cs35l41: Add ASP TX3/4 source to register patch
ASoC: dapm: Initialise kcontrol data for mux/demux controls
ASoC: rt711-sdca: fix kernel NULL pointer dereference when IO error
ASoC: cs35l41: Correct some control names
ASoC: wm5110: Fix DRE control
ASoC: wm_adsp: Fix event for preloader
MAINTAINERS: update ASoC Qualcomm maintainer email-id
ASoC: rockchip: i2s: switch BCLK to GPIO
ASoC: SOF: Intel: disable IMR boot when resuming from ACPI S4 and S5 states
ASoC: SOF: pm: add definitions for S4 and S5 states
ASoC: SOF: pm: add explicit behavior for ACPI S1 and S2
ASoC: SOF: Intel: hda: Fix compressed stream position tracking
...
|
|
If CONFIG_OF is not enabled, default of_get_display_timing() returns an
errno, so include the header.
Fixes: 422b67e0b31a ("videomode: provide dummy inline functions for !CONFIG_OF")
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Since optimisitic decrypt may add extra load in case of retries
require socket owner to explicitly opt-in.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Offloading police with action TC_ACT_UNSPEC was erroneously disabled even
though it was supported by mlx5 matchall offload implementation, which
didn't verify the action type but instead assumed that any single police
action attached to matchall classifier is a 'continue' action. Lack of
action type check made it non-obvious what mlx5 matchall implementation
actually supports and caused implementers and reviewers of referenced
commits to disallow it as a part of improved validation code.
Fixes: b8cd5831c61c ("net: flow_offload: add tc police action parameters")
Fixes: b50e462bc22d ("net/sched: act_police: Add extack messages for offload failure")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The IOMMU driver shares the pasid table for PCI alias devices. When the
RID2PASID entry of the shared pasid table has been filled by the first
device, the subsequent device will encounter the "DMAR: Setup RID2PASID
failed" failure as the pasid entry has already been marked as present.
As the result, the IOMMU probing process will be aborted.
On the contrary, when any alias device is hot-removed from the system,
for example, by writing to /sys/bus/pci/devices/.../remove, the shared
RID2PASID will be cleared without any notifications to other devices.
As the result, any DMAs from those rest devices are blocked.
Sharing pasid table among PCI alias devices could save two memory pages
for devices underneath the PCIe-to-PCI bridges. Anyway, considering that
those devices are rare on modern platforms that support VT-d in scalable
mode and the saved memory is negligible, it's reasonable to remove this
part of immature code to make the driver feasible and stable.
Fixes: ef848b7e5a6a0 ("iommu/vt-d: Setup pasid entry for RID2PASID support")
Reported-by: Chenyi Qiang <chenyi.qiang@intel.com>
Reported-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220623065720.727849-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20220625133430.2200315-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
In order to provide type match support we require a new type of
relocation which, in turn, requires toolchain support. Recent LLVM/Clang
versions support a new value for the last argument to the
__builtin_preserve_type_info builtin, for example.
With this change we introduce the necessary constants into relevant
header files, mirroring what the compiler may support.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220628160127.607834-2-deso@posteo.net
|
|
All callers of taprio_offload_get() and taprio_offload_free() prior to
the blamed commit are conditionally compiled based on CONFIG_NET_SCH_TAPRIO.
felix_vsc9959.c is different; it provides vsc9959_qos_port_tas_set()
even when taprio is compiled out.
Provide shim definitions for the functions exported by taprio so that
felix_vsc9959.c is able to compile. vsc9959_qos_port_tas_set() in that
case is dead code anyway, and ocelot_port->taprio remains NULL, which is
fine for the rest of the logic.
Fixes: 1c9017e44af2 ("net: dsa: felix: keep reference on entire tc-taprio config")
Reported-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20220704190241.1288847-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
commit 72f2ecb7ece7 ("ACPI: bus: Set CPPC _OSC bits for all and
when CPPC_LIB is supported") added support for claiming to
support CPPC in _OSC on non-Intel platforms.
This unfortunately caused a regression on a vartiety of AMD
platforms in the field because a number of AMD platforms don't set
the `_OSC` bit 5 or 6 to indicate CPPC or CPPC v2 support.
As these AMD platforms already claim CPPC support via a dedicated
MSR from `X86_FEATURE_CPPC`, use this enable this feature rather
than requiring the `_OSC` on platforms with a dedicated MSR.
If there is additional breakage on the shared memory designs also
missing this _OSC, additional follow up changes may be needed.
Fixes: 72f2ecb7ece7 ("Set CPPC _OSC bits for all and when CPPC_LIB is supported")
Reported-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Previously the kernel used to ignore whether the firmware masked CPPC
or CPPCv2 and would just pretend that it worked.
When support for the USB4 bit in _OSC was introduced from commit
9e1f561afb ("ACPI: Execute platform _OSC also with query bit clear")
the kernel began to look at the return when the query bit was clear.
This caused regressions that were misdiagnosed and attempted to be solved
as part of commit 2ca8e6285250 ("Revert "ACPI: Pass the same capabilities
to the _OSC regardless of the query flag""). This caused a different
regression where non-Intel systems weren't able to negotiate _OSC
properly.
This was reverted in commit 2ca8e6285250 ("Revert "ACPI: Pass the same
capabilities to the _OSC regardless of the query flag"") and attempted to
be fixed by commit c42fa24b4475 ("ACPI: bus: Avoid using CPPC if not
supported by firmware") but the regression still returned.
These systems with the regression only load support for CPPC from an SSDT
dynamically when _OSC reports CPPC v2. Avoid the problem by not letting
CPPC satisfy the requirement in `acpi_cppc_processor_probe`.
Reported-by: CUI Hao <cuihao.leo@gmail.com>
Reported-by: maxim.novozhilov@gmail.com
Reported-by: lethe.tree@protonmail.com
Reported-by: garystephenwright@gmail.com
Reported-by: galaxyking0419@gmail.com
Fixes: c42fa24b4475 ("ACPI: bus: Avoid using CPPC if not supported by firmware")
Fixes: 2ca8e6285250 ("Revert "ACPI Pass the same capabilities to the _OSC regardless of the query flag"")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213023
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2075387
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: CUI Hao <cuihao.leo@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If an NFS file is opened for writing and closed, fscache_invalidate() will
be asked to invalidate the file - however, if the cookie is in the
LOOKING_UP state (or the CREATING state), then request to invalidate
doesn't get recorded for fscache_cookie_state_machine() to do something
with.
Fix this by making __fscache_invalidate() set a flag if it sees the cookie
is in the LOOKING_UP state to indicate that we need to go to invalidation.
Note that this requires a count on the n_accesses counter for the state
machine, which that will release when it's done.
fscache_cookie_state_machine() then shifts to the INVALIDATING state if it
sees the flag.
Without this, an nfs file can get corrupted if it gets modified locally and
then read locally as the cache contents may not get updated.
Fixes: d24af13e2e23 ("fscache: Implement cookie invalidation")
Reported-by: Max Kellermann <mk@cm4all.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Max Kellermann <mk@cm4all.com>
Link: https://lore.kernel.org/r/YlWWbpW5Foynjllo@rabbit.intern.cm-ag [1]
|
|
Add support for BCM53128 internal PHYs. These support interrupts as well as
statistics. Therefore, enable the Broadcom PHY driver for them.
Tested on BCM53128 switch using the mainline b53 DSA driver.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When building htmldocs on Linus's tree, there are inline emphasis warnings
on include/linux/highmem.h:
Documentation/vm/highmem:166: ./include/linux/highmem.h:154: WARNING: Inline emphasis start-string without end-string.
Documentation/vm/highmem:166: ./include/linux/highmem.h:157: WARNING: Inline emphasis start-string without end-string.
These warnings above are due to comments in code example at the mentioned
lines above are enclosed by double dash (--), which confuses Sphinx as
inline markup delimiters instead.
Fix these warnings by indenting the code example with literal block
indentation and making the comments C comments.
Link: https://lkml.kernel.org/r/20220622084546.17745-1-bagasdotme@gmail.com
Fixes: 85a85e7601263f ("Documentation/vm: move "Using kmap-atomic" to highmem.h")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Fabio M. De Francesco" <fmdefrancesco@gmail.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Looking at the conditional lock acquire functions in the kernel due to
the new sparse support (see commit 4a557a5d1a61 "sparse: introduce
conditional lock acquire function attribute"), it became obvious that
the lockref code has a couple of them, but they don't match the usual
naming convention for the other ones, and their return value logic is
also reversed.
In the other very similar places, the naming pattern is '*_and_lock()'
(eg 'atomic_put_and_lock()' and 'refcount_dec_and_lock()'), and the
function returns true when the lock is taken.
The lockref code is superficially very similar to the refcount code,
only with the special "atomic wrt the embedded lock" semantics. But
instead of the '*_and_lock()' naming it uses '*_or_lock()'.
And instead of returning true in case it took the lock, it returns true
if it *didn't* take the lock.
Now, arguably the reflock code is quite logical: it really is a "either
decrement _or_ lock" kind of situation - and the return value is about
whether the operation succeeded without any special care needed.
So despite the similarities, the differences do make some sense, and
maybe it's not worth trying to unify the different conditional locking
primitives in this area.
But while looking at this all, it did become obvious that the
'lockref_get_or_lock()' function hasn't actually had any users for
almost a decade.
The only user it ever had was the shortlived 'd_rcu_to_refcount()'
function, and it got removed and replaced with 'lockref_get_not_dead()'
back in 2013 in commits 0d98439ea3c6 ("vfs: use lockred 'dead' flag to
mark unrecoverably dead dentries") and e5c832d55588 ("vfs: fix dentry
RCU to refcounting possibly sleeping dput()")
In fact, that single use was removed less than a week after the whole
function was introduced in commit b3abd80250c1 ("lockref: add
'lockref_get_or_lock() helper") so this function has been around for a
decade, but only had a user for six days.
Let's just put this mis-designed and unused function out of its misery.
We can think about the naming and semantic oddities of the remaining
'lockref_put_or_lock()' later, but at least that function has users.
And while the naming is different and the return value doesn't match,
that function matches the whole '{atomic,refcount}_dec_and_test()'
pattern much better (ie the magic happens when the count goes down to
zero, not when it is incremented from zero).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The kernel tends to try to avoid conditional locking semantics because
it makes it harder to think about and statically check locking rules,
but we do have a few fundamental locking primitives that take locks
conditionally - most obviously the 'trylock' functions.
That has always been a problem for 'sparse' checking for locking
imbalance, and we've had a special '__cond_lock()' macro that we've used
to let sparse know how the locking works:
# define __cond_lock(x,c) ((c) ? ({ __acquire(x); 1; }) : 0)
so that you can then use this to tell sparse that (for example) the
spinlock trylock macro ends up acquiring the lock when it succeeds, but
not when it fails:
#define raw_spin_trylock(lock) __cond_lock(lock, _raw_spin_trylock(lock))
and then sparse can follow along the locking rules when you have code like
if (!spin_trylock(&dentry->d_lock))
return LRU_SKIP;
.. sparse sees that the lock is held here..
spin_unlock(&dentry->d_lock);
and sparse ends up happy about the lock contexts.
However, this '__cond_lock()' use does result in very ugly header files,
and requires you to basically wrap the real function with that macro
that uses '__cond_lock'. Which has made PeterZ NAK things that try to
fix sparse warnings over the years [1].
To solve this, there is now a very experimental patch to sparse that
basically does the exact same thing as '__cond_lock()' did, but using a
function attribute instead. That seems to make PeterZ happy [2].
Note that this does not replace existing use of '__cond_lock()', but
only exposes the new proposed attribute and uses it for the previously
unannotated 'refcount_dec_and_lock()' family of functions.
For existing sparse installations, this will make no difference (a
negative output context was ignored), but if you have the experimental
sparse patch it will make sparse now understand code that uses those
functions, the same way '__cond_lock()' makes sparse understand the very
similar 'atomic_dec_and_lock()' uses that have the old '__cond_lock()'
annotations.
Note that in some cases this will silence existing context imbalance
warnings. But in other cases it may end up exposing new sparse warnings
for code that sparse just didn't see the locking for at all before.
This is a trial, in other words. I'd expect that if it ends up being
successful, and new sparse releases end up having this new attribute,
we'll migrate the old-style '__cond_lock()' users to use the new-style
'__cond_acquires' function attribute.
The actual experimental sparse patch was posted in [3].
Link: https://lore.kernel.org/all/20130930134434.GC12926@twins.programming.kicks-ass.net/ [1]
Link: https://lore.kernel.org/all/Yr60tWxN4P568x3W@worktop.programming.kicks-ass.net/ [2]
Link: https://lore.kernel.org/all/CAHk-=wjZfO9hGqJ2_hGQG3U_XzSh9_XaXze=HgPdvJbgrvASfA@mail.gmail.com/ [3]
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Alexander Aring <aahringo@redhat.com>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-07-03
this is a pull request of 15 patches for net-next/master.
The first 2 patches are by Max Staudt and add the can327 serial CAN
driver along with a new line discipline ID.
The next patch is by me an fixes a typo in the ctucanfd driver.
The last 12 patches are by Dario Binacchi and integrate slcan CAN
serial driver better into the existing CAN driver API.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Upcoming changes on slcan driver will require you to specify a bitrate
of value -1 to prevent the open_candev() from failing but at the same
time highlighting that it is a fake value. In this case the command
`ip --details -s -s link show' would print 4294967295 as the bitrate
value. The patch change this value in 0.
Link: https://lore.kernel.org/all/20220628163137.413025-5-dario.binacchi@amarulasolutions.com
Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Tested-by: Jeroen Hofstee <jhofstee@victronenergy.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Currently, there are three eswitch modes, none, legacy and switchdev.
None is the default mode. Remove redundant none mode as eswitch mode
should always be either legacy mode or switchdev mode.
With this patch, there are two behavior changes:
1. Legacy becomes the default mode. When querying eswitch mode using
devlink, a valid mode is always returned.
2. When disabling sriov, the eswitch mode will not change, only vfs
are unloaded.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The Microchip LAN937X switches have a tagging protocol which is
very similar to KSZ tagging. So that the implementation is added to
tag_ksz.c and reused common APIs
Signed-off-by: Prasanna Vengateshan <prasanna.vengateshan@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most drivers use "skb_transport_offset(skb) + tcp_hdrlen(skb)"
to compute headers length for a TCP packet, but others
use more convoluted (but equivalent) ways.
Add skb_tcp_all_headers() and skb_inner_tcp_all_headers()
helpers to harmonize this a bit.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix some issues in cpufreq drivers and some issues in devfreq:
- Fix error code path issues related PROBE_DEFER handling in devfreq
(Christian Marangi)
- Revert an editing accident in SPDX-License line in the devfreq
passive governor (Lukas Bulwahn)
- Fix refcount leak in of_get_devfreq_events() in the exynos-ppmu
devfreq driver (Miaoqian Lin)
- Use HZ_PER_KHZ macro in the passive devfreq governor (Yicong Yang)
- Fix missing of_node_put for qoriq and pmac32 driver (Liang He)
- Fix issues around throttle interrupt for qcom driver (Stephen Boyd)
- Add MT8186 to cpufreq-dt-platdev blocklist (AngeloGioacchino Del
Regno)
- Make amd-pstate enable CPPC on resume from S3 (Jinzhou Su)"
* tag 'pm-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / devfreq: passive: revert an editing accident in SPDX-License line
PM / devfreq: Fix kernel warning with cpufreq passive register fail
PM / devfreq: Rework freq_table to be local to devfreq struct
PM / devfreq: exynos-ppmu: Fix refcount leak in of_get_devfreq_events
PM / devfreq: passive: Use HZ_PER_KHZ macro in units.h
PM / devfreq: Fix cpufreq passive unregister erroring on PROBE_DEFER
PM / devfreq: Mute warning on governor PROBE_DEFER
PM / devfreq: Fix kernel panic with cpu based scaling to passive gov
cpufreq: Add MT8186 to cpufreq-dt-platdev blocklist
cpufreq: pmac32-cpufreq: Fix refcount leak bug
cpufreq: qcom-hw: Don't do lmh things without a throttle interrupt
drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.c
cpufreq: amd-pstate: Add resume and suspend callbacks
|
|
Instead of passing an extra bool argument to pm_runtime_release_supplier(),
make its callers take care of triggering a runtime-suspend of the
supplier device as needed.
No expected functional impact.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
|
|
Pull io_uring fixes from Jens Axboe:
"Two minor tweaks:
- While we still can, adjust the send/recv based flags to be in
->ioprio rather than in ->addr2. This is consistent with eg accept,
and also doesn't waste a full 64-bit field for flags (Pavel)
- 5.18-stable fix for re-importing provided buffers. Not much real
world relevance here as it'll only impact non-pollable files gone
async, which is more of a practical test case rather than something
that is used in the wild (Dylan)"
* tag 'io_uring-5.19-2022-07-01' of git://git.kernel.dk/linux-block:
io_uring: fix provided buffer import
io_uring: keep sendrecv flags in ioprio
|
|
There are no more users for the mentioned macros, just
drop them.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support to retrieve EHT capabilities and EHT operation elements
passed by the userspace in the beacon template and store the pointers
in struct cfg80211_ap_settings to be used by the drivers.
Co-developed-by: Vikram Kandukuri <quic_vikram@quicinc.com>
Signed-off-by: Vikram Kandukuri <quic_vikram@quicinc.com>
Co-developed-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Link: https://lore.kernel.org/r/20220523064904.28523-1-quic_alokad@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Increase akm_suites array size in struct cfg80211_crypto_settings to 10
and advertise the capability to userspace. This allows userspace to send
more than two AKMs to driver in netlink commands such as
NL80211_CMD_CONNECT.
This capability is needed for implementing WPA3-Personal transition mode
correctly with any driver that handles roaming internally. Currently,
the possible AKMs for multi-AKM connect can include PSK, PSK-SHA-256,
SAE, FT-PSK and FT-SAE. Since the count is already 5, increasing
the akm_suites array size to 10 should be reasonable for future
usecases.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/1653312358-12321-1-git-send-email-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This reverts commits 6a789ba679d652587532cec2a0e0274fda172f3b and
2433647bc8d983a543e7d31b41ca2de1c7e2c198.
The virtual time scheduler code has a number of issues:
- queues slowed down by hardware/firmware powersave handling were not properly
handled.
- on ath10k in push-pull mode, tx queues that the driver tries to pull from
were starved, causing excessive latency
- delay between tx enqueue and reported airtime use were causing excessively
bursty tx behavior
The bursty behavior may also be present on the round-robin scheduler, but there
it is much easier to fix without introducing additional regressions
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://lore.kernel.org/r/20220625212411.36675-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Somehow kernel-doc complains here about strong markup, but
we really don't need the [] so just remove that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
These struct members no longer exist, remove them
from documentation.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The lack of the colon makes it not parse the function parameter:
include/net/mac80211.h:6250: warning: Function parameter or member 'vif' not described in 'ieee80211_channel_switch_disconnect'
Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/11c1bdb861d89c93058fcfe312749b482851cbdb.1656409369.git.mchehab@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There are currently 17 kernel-doc warnings on this file:
include/net/cfg80211.h:391: warning: Function parameter or member 'bw' not described in 'ieee80211_eht_mcs_nss_supp'
include/net/cfg80211.h:437: warning: Function parameter or member 'eht_cap' not described in 'ieee80211_sband_iftype_data'
include/net/cfg80211.h:507: warning: Function parameter or member 's1g' not described in 'ieee80211_sta_s1g_cap'
include/net/cfg80211.h:1390: warning: Function parameter or member 'counter_offset_beacon' not described in 'cfg80211_color_change_settings'
include/net/cfg80211.h:1390: warning: Function parameter or member 'counter_offset_presp' not described in 'cfg80211_color_change_settings'
include/net/cfg80211.h:1430: warning: Enum value 'STATION_PARAM_APPLY_STA_TXPOWER' not described in enum 'station_parameters_apply_mask'
include/net/cfg80211.h:2195: warning: Function parameter or member 'dot11MeshConnectedToAuthServer' not described in 'mesh_config'
include/net/cfg80211.h:2341: warning: Function parameter or member 'short_ssid' not described in 'cfg80211_scan_6ghz_params'
include/net/cfg80211.h:3328: warning: Function parameter or member 'kck_len' not described in 'cfg80211_gtk_rekey_data'
include/net/cfg80211.h:3698: warning: Function parameter or member 'ftm' not described in 'cfg80211_pmsr_result'
include/net/cfg80211.h:3828: warning: Function parameter or member 'global_mcast_stypes' not described in 'mgmt_frame_regs'
include/net/cfg80211.h:4977: warning: Function parameter or member 'ftm' not described in 'cfg80211_pmsr_capabilities'
include/net/cfg80211.h:5742: warning: Function parameter or member 'u' not described in 'wireless_dev'
include/net/cfg80211.h:5742: warning: Function parameter or member 'links' not described in 'wireless_dev'
include/net/cfg80211.h:5742: warning: Function parameter or member 'valid_links' not described in 'wireless_dev'
include/net/cfg80211.h:6076: warning: Function parameter or member 'is_amsdu' not described in 'ieee80211_data_to_8023_exthdr'
include/net/cfg80211.h:6949: warning: Function parameter or member 'sig_dbm' not described in 'cfg80211_notify_new_peer_candidate'
Address them, in order to build a better documentation from this
header.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/f6f522cdc716a01744bb0eae2186f4592976222b.1656409369.git.mchehab@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
S1g action frame with code 22 is not protected so update the robust
action frame list.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Link: https://lore.kernel.org/r/20220622010820.17522-1-chui-hao.chiu@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
rtsx_usb uses same buffer for command and response. There could
be a potential conflict using the same buffer for both especially
if retries and timeouts are involved.
Use separate command and response buffers to avoid conflicts.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/07e3721804ff07aaab9ef5b39a5691d0718b9ade.1656642167.git.skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
rtsx_usb driver allocates coherent dma buffer for urb transfers.
This buffer is passed to usb_bulk_msg() and usb core tries to
map already mapped buffer running into a dma mapping error.
xhci_hcd 0000:01:00.0: rejecting DMA map of vmalloc memory
WARNING: CPU: 1 PID: 279 at include/linux/dma-mapping.h:326 usb_ hcd_map_urb_for_dma+0x7d6/0x820
...
xhci_map_urb_for_dma+0x291/0x4e0
usb_hcd_submit_urb+0x199/0x12b0
...
usb_submit_urb+0x3b8/0x9e0
usb_start_wait_urb+0xe3/0x2d0
usb_bulk_msg+0x115/0x240
rtsx_usb_transfer_data+0x185/0x1a8 [rtsx_usb]
rtsx_usb_send_cmd+0xbb/0x123 [rtsx_usb]
rtsx_usb_write_register+0x12c/0x143 [rtsx_usb]
rtsx_usb_probe+0x226/0x4b2 [rtsx_usb]
Fix it to use kmalloc() to get DMA-able memory region instead.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/667d627d502e1ba9ff4f9b94966df3299d2d3c0d.1656642167.git.skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Time-sensitive networking code needs to work with PTP times expressed in
nanoseconds, and with packet transmission times expressed in
picoseconds, since those would be fractional at higher than gigabit
speed when expressed in nanoseconds.
Convert the existing uses in tc-taprio and the ocelot/felix DSA driver
to a PSEC_PER_NSEC macro. This macro is placed in include/linux/time64.h
as opposed to its relatives (PSEC_PER_SEC etc) from include/vdso/time64.h
because the vDSO library does not (yet) need/use it.
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # for the vDSO parts
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In a future change we will need to remember the entire tc-taprio config
on all ports rather than just the base time, so use the
taprio_offload_get() helper function to replace ocelot_port->base_time
with ocelot_port->taprio.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"Bit quieter this week, the main thing is it pulls in the fixes for the
sysfb resource issue you were seeing. these had been queued for next
so should have had some decent testing.
Otherwise amdgpu, i915 and msm each have a few fixes, and vc4 has one.
fbdev:
- sysfb fixes/conflicting fb fixes
amdgpu:
- GPU recovery fix
- Fix integer type usage in fourcc header for AMD modifiers
- KFD TLB flush fix for gfx9 APUs
- Display fix
i915:
- Fix ioctl argument error return
- Fix d3cold disable to allow PCI upstream bridge D3 transition
- Fix setting cache_dirty for dma-buf objects on discrete
msm:
- Fix to increment vsync_cnt before calling drm_crtc_handle_vblank so
that userspace sees the value *after* it is incremented if waiting
for vblank events
- Fix to reset drm_dev to NULL in dp_display_unbind to avoid a crash
in probe/bind error paths
- Fix to resolve the smatch error of de-referencing before NULL check
in dpu_encoder_phys_wb.c
- Fix error return to userspace if fence-id allocation fails in
submit ioctl
vc4:
- NULL ptr dereference fix"
* tag 'drm-fixes-2022-07-01' of git://anongit.freedesktop.org/drm/drm:
Revert "drm/amdgpu/display: set vblank_disable_immediate for DC"
drm/amdgpu: To flush tlb for MMHUB of RAVEN series
drm/fourcc: fix integer type usage in uapi header
drm/amdgpu: fix adev variable used in amdgpu_device_gpu_recover()
fbdev: Disable sysfb device registration when removing conflicting FBs
firmware: sysfb: Add sysfb_disable() helper function
firmware: sysfb: Make sysfb_create_simplefb() return a pdev pointer
drm/msm/gem: Fix error return on fence id alloc fail
drm/i915: tweak the ordering in cpu_write_needs_clflush
drm/i915/dgfx: Disable d3cold at gfx root port
drm/i915/gem: add missing else
drm/vc4: perfmon: Fix variable dereferenced before check
drm/msm/dpu: Fix variable dereferenced before check
drm/msm/dp: reset drm_dev to NULL at dp_display_unbind()
drm/msm/dpu: Increment vsync_cnt before waking up userspace
|
|
drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.c
9c5de246c1db ("net: sparx5: mdb add/del handle non-sparx5 devices")
fbb89d02e33a ("net: sparx5: Allow mdb entries to both CPU and ports")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A NULL pointer dereference fix for vc4, and 3 patches to improve the
sysfb device behaviour when removing conflicting framebuffers
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630072404.2fa4z3nk5h5q34ci@houat
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - new code bugs:
- clear msg_get_inq in __sys_recvfrom() and __copy_msghdr_from_user()
- mptcp:
- invoke MP_FAIL response only when needed
- fix shutdown vs fallback race
- consistent map handling on failure
- octeon_ep: use bitwise AND
Previous releases - regressions:
- tipc: move bc link creation back to tipc_node_create, fix NPD
Previous releases - always broken:
- tcp: add a missing nf_reset_ct() in 3WHS handling to prevent socket
buffered skbs from keeping refcount on the conntrack module
- ipv6: take care of disable_policy when restoring routes
- tun: make sure to always disable and unlink NAPI instances
- phy: don't trigger state machine while in suspend
- netfilter: nf_tables: avoid skb access on nf_stolen
- asix: fix "can't send until first packet is send" issue
- usb: asix: do not force pause frames support
- nxp-nci: don't issue a zero length i2c_master_read()
Misc:
- ncsi: allow use of proper "mellanox" DT vendor prefix
- act_api: add a message for user space if any actions were already
flushed before the error was hit"
* tag 'net-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
net: dsa: felix: fix race between reading PSFP stats and port stats
selftest: tun: add test for NAPI dismantle
net: tun: avoid disabling NAPI twice
net: sparx5: mdb add/del handle non-sparx5 devices
net: sfp: fix memory leak in sfp_probe()
mlxsw: spectrum_router: Fix rollback in tunnel next hop init
net: rose: fix UAF bugs caused by timer handler
net: usb: ax88179_178a: Fix packet receiving
net: bonding: fix use-after-free after 802.3ad slave unbind
ipv6: fix lockdep splat in in6_dump_addrs()
net: phy: ax88772a: fix lost pause advertisement configuration
net: phy: Don't trigger state machine while in suspend
usbnet: fix memory allocation in helpers
selftests net: fix kselftest net fatal error
NFC: nxp-nci: don't print header length mismatch on i2c error
NFC: nxp-nci: Don't issue a zero length i2c_master_read()
net: tipc: fix possible refcount leak in tipc_sk_create()
nfc: nfcmrvl: Fix irq_of_parse_and_map() return value
net: ipv6: unexport __init-annotated seg6_hmac_net_init()
ipv6/sit: fix ipip6_tunnel_get_prl return value
...
|
|
Pull rdma fixes from Jason Gunthorpe:
"Three minor bug fixes:
- qedr not setting the QP timeout properly toward userspace
- Memory leak on error path in ib_cm
- Divide by 0 in RDMA interrupt moderation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
linux/dim: Fix divide by 0 in RDMA DIM
RDMA/cm: Fix memory leak in ib_cm_insert_listen
RDMA/qedr: Fix reporting QP timeout attribute
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fanotify fix from Jan Kara:
"A fix for recently added fanotify API to have stricter checks and
refuse some invalid flag combinations to make our life easier in the
future"
* tag 'fsnotify_for_v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: refine the validation checks on non-dir inode mask
|
|
We waste a u64 SQE field for flags even though we don't need as many
bits and it can be used for something more useful later. Store io_uring
specific send/recv flags in sqe->ioprio instead of ->addr2.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Fixes: 0455d4ccec54 ("io_uring: add POLL_FIRST support for send/sendmsg and recv/recvmsg")
[axboe: change comment in io_uring.h as well]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
commit ed6cd6a17896 ("net, neigh: Set lower cap for neigh_managed_work rearming")
fixed a case when DELAY_PROBE_TIME is configured to 0, the processing of the
system work queue hog CPU to 100%, and further more we should introduce
a new option used by periodic probe
Signed-off-by: Yuwei Wang <wangyuweihx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
add proc_dointvec_ms_jiffies_minmax to fit read msecs value to jiffies
with a limited range of values
Signed-off-by: Yuwei Wang <wangyuweihx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Upon system sleep, mdio_bus_phy_suspend() stops the phy_state_machine(),
but subsequent interrupts may retrigger it:
They may have been left enabled to facilitate wakeup and are not
quiesced until the ->suspend_noirq() phase. Unwanted interrupts may
hence occur between mdio_bus_phy_suspend() and dpm_suspend_noirq(),
as well as between dpm_resume_noirq() and mdio_bus_phy_resume().
Retriggering the phy_state_machine() through an interrupt is not only
undesirable for the reason given in mdio_bus_phy_suspend() (freezing it
midway with phydev->lock held), but also because the PHY may be
inaccessible after it's suspended: Accesses to USB-attached PHYs are
blocked once usb_suspend_both() clears the can_submit flag and PHYs on
PCI network cards may become inaccessible upon suspend as well.
Amend phy_interrupt() to avoid triggering the state machine if the PHY
is suspended. Signal wakeup instead if the attached net_device or its
parent has been configured as a wakeup source. (Those conditions are
identical to mdio_bus_phy_may_suspend().) Postpone handling of the
interrupt until the PHY has resumed.
Before stopping the phy_state_machine() in mdio_bus_phy_suspend(),
wait for a concurrent phy_interrupt() to run to completion. That is
necessary because phy_interrupt() may have checked the PHY's suspend
status before the system sleep transition commenced and it may thus
retrigger the state machine after it was stopped.
Likewise, after re-enabling interrupt handling in mdio_bus_phy_resume(),
wait for a concurrent phy_interrupt() to complete to ensure that
interrupts which it postponed are properly rerun.
The issue was exposed by commit 1ce8b37241ed ("usbnet: smsc95xx: Forward
PHY interrupts to PHY driver to avoid polling"), but has existed since
forever.
Fixes: 541cd3ee00a4 ("phylib: Fix deadlock on resume")
Link: https://lore.kernel.org/netdev/a5315a8a-32c2-962f-f696-de9a26d30091@samsung.com/
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable@vger.kernel.org # v2.6.33+
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/b7f386d04e9b5b0e2738f0125743e30676f309ef.1656410895.git.lukas@wunner.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
br_switchdev_fdb_notify() creates an on-stack FDB info variable, and
initializes it member by member. As such, newly added fields which are
not initialized by br_switchdev_fdb_notify() will contain junk bytes
from the stack.
Other uses of struct switchdev_notifier_fdb_info have a struct
initializer which should put zeroes in the uninitialized fields.
Add a reminder above the structure for future developers. Recently
discussed during review.
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20220524152144.40527-2-schultz.hans+netdev@gmail.com/#24877698
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20220524152144.40527-3-schultz.hans+netdev@gmail.com/#24912269
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20220628100831.2899434-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for pause stats
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Restore set counter when one of the CPU loses race to add elements
to sets.
2) After NF_STOLEN, skb might be there no more, update nftables trace
infra to avoid access to skb in this case. From Florian Westphal.
3) nftables bridge might register a prerouting hook with zero priority,
br_netfilter incorrectly skips it. Also from Florian.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: br_netfilter: do not skip all hooks with 0 priority
netfilter: nf_tables: avoid skb access on nf_stolen
netfilter: nft_dynset: restore set element counter when failing to update
====================
Link: https://lore.kernel.org/r/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
