summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2019-06-20net: sched: act_ctinfo: tidy UAPI definitionKevin Darbyshire-Bryant2-5/+5
Remove some enums from the UAPI definition that were only used internally and are NOT part of the UAPI. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19inet: fix various use-after-free in defrags unitsEric Dumazet2-1/+9
syzbot reported another issue caused by my recent patches. [1] The issue here is that fqdir_exit() is initiating a work queue and immediately returns. A bit later cleanup_net() was able to free the MIB (percpu data) and the whole struct net was freed, but we had active frag timers that fired and triggered use-after-free. We need to make sure that timers can catch fqdir->dead being set, to bailout. Since RCU is used for the reader side, this means we want to respect an RCU grace period between these operations : 1) qfdir->dead = 1; 2) netns dismantle (freeing of various data structure) This patch uses new new (struct pernet_operations)->pre_exit infrastructure to ensures a full RCU grace period happens between fqdir_pre_exit() and fqdir_exit() This also means we can use a regular work queue, we no longer need rcu_work. Tested: $ time for i in {1..1000}; do unshare -n /bin/false;done real 0m2.585s user 0m0.160s sys 0m2.214s [1] BUG: KASAN: use-after-free in ip_expire+0x73e/0x800 net/ipv4/ip_fragment.c:152 Read of size 8 at addr ffff88808b9fe330 by task syz-executor.4/11860 CPU: 1 PID: 11860 Comm: syz-executor.4 Not tainted 5.2.0-rc2+ #22 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188 __kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 kasan_report+0x12/0x20 mm/kasan/common.c:614 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132 ip_expire+0x73e/0x800 net/ipv4/ip_fragment.c:152 call_timer_fn+0x193/0x720 kernel/time/timer.c:1322 expire_timers kernel/time/timer.c:1366 [inline] __run_timers kernel/time/timer.c:1685 [inline] __run_timers kernel/time/timer.c:1653 [inline] run_timer_softirq+0x66f/0x1740 kernel/time/timer.c:1698 __do_softirq+0x25c/0x94c kernel/softirq.c:293 invoke_softirq kernel/softirq.c:374 [inline] irq_exit+0x180/0x1d0 kernel/softirq.c:414 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x13b/0x550 arch/x86/kernel/apic/apic.c:1068 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:806 </IRQ> RIP: 0010:tomoyo_domain_quota_is_ok+0x131/0x540 security/tomoyo/util.c:1035 Code: 24 4c 3b 65 d0 0f 84 9c 00 00 00 e8 19 1d 73 fe 49 8d 7c 24 18 48 ba 00 00 00 00 00 fc ff df 48 89 f8 48 c1 e8 03 0f b6 04 10 <48> 89 fa 83 e2 07 38 d0 7f 08 84 c0 0f 85 69 03 00 00 41 0f b6 5c RSP: 0018:ffff88806ae079c0 EFLAGS: 00000a02 ORIG_RAX: ffffffffffffff13 RAX: 0000000000000000 RBX: 0000000000000010 RCX: ffffc9000e655000 RDX: dffffc0000000000 RSI: ffffffff82fd88a7 RDI: ffff888086202398 RBP: ffff88806ae07a00 R08: ffff88808b6c8700 R09: ffffed100d5c0f4d R10: ffffed100d5c0f4c R11: 0000000000000000 R12: ffff888086202380 R13: 0000000000000030 R14: 00000000000000d3 R15: 0000000000000000 tomoyo_supervisor+0x2e8/0xef0 security/tomoyo/common.c:2087 tomoyo_audit_path_number_log security/tomoyo/file.c:235 [inline] tomoyo_path_number_perm+0x42f/0x520 security/tomoyo/file.c:734 tomoyo_file_ioctl+0x23/0x30 security/tomoyo/tomoyo.c:335 security_file_ioctl+0x77/0xc0 security/security.c:1370 ksys_ioctl+0x57/0xd0 fs/ioctl.c:711 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4592c9 Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f8db5e44c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00000000004592c9 RDX: 0000000020000080 RSI: 00000000000089f1 RDI: 0000000000000006 RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f8db5e456d4 R13: 00000000004cc770 R14: 00000000004d5cd8 R15: 00000000ffffffff Allocated by task 9047: save_stack+0x23/0x90 mm/kasan/common.c:71 set_track mm/kasan/common.c:79 [inline] __kasan_kmalloc mm/kasan/common.c:489 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:462 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:497 slab_post_alloc_hook mm/slab.h:437 [inline] slab_alloc mm/slab.c:3326 [inline] kmem_cache_alloc+0x11a/0x6f0 mm/slab.c:3488 kmem_cache_zalloc include/linux/slab.h:732 [inline] net_alloc net/core/net_namespace.c:386 [inline] copy_net_ns+0xed/0x340 net/core/net_namespace.c:426 create_new_namespaces+0x400/0x7b0 kernel/nsproxy.c:107 unshare_nsproxy_namespaces+0xc2/0x200 kernel/nsproxy.c:206 ksys_unshare+0x440/0x980 kernel/fork.c:2692 __do_sys_unshare kernel/fork.c:2760 [inline] __se_sys_unshare kernel/fork.c:2758 [inline] __x64_sys_unshare+0x31/0x40 kernel/fork.c:2758 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2541: save_stack+0x23/0x90 mm/kasan/common.c:71 set_track mm/kasan/common.c:79 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:451 kasan_slab_free+0xe/0x10 mm/kasan/common.c:459 __cache_free mm/slab.c:3432 [inline] kmem_cache_free+0x86/0x260 mm/slab.c:3698 net_free net/core/net_namespace.c:402 [inline] net_drop_ns.part.0+0x70/0x90 net/core/net_namespace.c:409 net_drop_ns net/core/net_namespace.c:408 [inline] cleanup_net+0x538/0x960 net/core/net_namespace.c:571 process_one_work+0x989/0x1790 kernel/workqueue.c:2269 worker_thread+0x98/0xe40 kernel/workqueue.c:2415 kthread+0x354/0x420 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 The buggy address belongs to the object at ffff88808b9fe100 which belongs to the cache net_namespace of size 6784 The buggy address is located 560 bytes inside of 6784-byte region [ffff88808b9fe100, ffff88808b9ffb80) The buggy address belongs to the page: page:ffffea00022e7f80 refcount:1 mapcount:0 mapping:ffff88821b6f60c0 index:0x0 compound_mapcount: 0 flags: 0x1fffc0000010200(slab|head) raw: 01fffc0000010200 ffffea000256f288 ffffea0001bbef08 ffff88821b6f60c0 raw: 0000000000000000 ffff88808b9fe100 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88808b9fe200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88808b9fe280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88808b9fe300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88808b9fe380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88808b9fe400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 3c8fc8782044 ("inet: frags: rework rhashtable dismantle") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19netns: add pre_exit method to struct pernet_operationsEric Dumazet1-0/+5
Current struct pernet_operations exit() handlers are highly discouraged to call synchronize_rcu(). There are cases where we need them, and exit_batch() does not help the common case where a single netns is dismantled. This patch leverages the existing synchronize_rcu() call in cleanup_net() Calling optional ->pre_exit() method before ->exit() or ->exit_batch() allows to benefit from a single synchronize_rcu() call. Note that the synchronize_rcu() calls added in this patch are only in error paths or slow paths. Tested: $ time for i in {1..1000}; do unshare -n /bin/false;done real 0m2.612s user 0m0.171s sys 0m2.216s Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19page_pool: add tracepoints for page_pool with details need by XDPJesper Dangaard Brouer1-0/+87
The xdp tracepoints for mem id disconnect don't carry information about, why it was not safe_to_remove. The tracepoint page_pool:page_pool_inflight in this patch can be used for extract this info for further debugging. This patchset also adds tracepoint for the pages_state_* release/hold transitions, including a pointer to the page. This can be used for stats about in-flight pages, or used to debug page leakage via keeping track of page pointer and combining this with kprobe for __put_page(). Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19xdp: add tracepoints for XDP memJesper Dangaard Brouer2-0/+138
These tracepoints make it easier to troubleshoot XDP mem id disconnect. The xdp:mem_disconnect tracepoint cannot be replaced via kprobe. It is placed at the last stable place for the pointer to struct xdp_mem_allocator, just before it's scheduled for RCU removal. It also extract info on 'safe_to_remove' and 'force'. Detailed info about in-flight pages is not available at this layer. The next patch will added tracepoints needed at the page_pool layer for this. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19xdp: tracking page_pool resources and safe removalJesper Dangaard Brouer1-10/+31
This patch is needed before we can allow drivers to use page_pool for DMA-mappings. Today with page_pool and XDP return API, it is possible to remove the page_pool object (from rhashtable), while there are still in-flight packet-pages. This is safely handled via RCU and failed lookups in __xdp_return() fallback to call put_page(), when page_pool object is gone. In-case page is still DMA mapped, this will result in page note getting correctly DMA unmapped. To solve this, the page_pool is extended with tracking in-flight pages. And XDP disconnect system queries page_pool and waits, via workqueue, for all in-flight pages to be returned. To avoid killing performance when tracking in-flight pages, the implement use two (unsigned) counters, that in placed on different cache-lines, and can be used to deduct in-flight packets. This is done by mapping the unsigned "sequence" counters onto signed Two's complement arithmetic operations. This is e.g. used by kernel's time_after macros, described in kernel commit 1ba3aab3033b and 5a581b367b5, and also explained in RFC1982. The trick is these two incrementing counters only need to be read and compared, when checking if it's safe to free the page_pool structure. Which will only happen when driver have disconnected RX/alloc side. Thus, on a non-fast-path. It is chosen that page_pool tracking is also enabled for the non-DMA use-case, as this can be used for statistics later. After this patch, using page_pool requires more strict resource "release", e.g. via page_pool_release_page() that was introduced in this patchset, and previous patches implement/fix this more strict requirement. Drivers no-longer call page_pool_destroy(). Drivers already call xdp_rxq_info_unreg() which call xdp_rxq_info_unreg_mem_model(), which will attempt to disconnect the mem id, and if attempt fails schedule the disconnect for later via delayed workqueue. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19page_pool: introduce page_pool_free and use in mlx5Jesper Dangaard Brouer1-0/+11
In case driver fails to register the page_pool with XDP return API (via xdp_rxq_info_reg_mem_model()), then the driver can free the page_pool resources more directly than calling page_pool_destroy(), which does a unnecessarily RCU free procedure. This patch is preparing for removing page_pool_destroy(), from driver invocation. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19xdp: page_pool related fix to cpumapJesper Dangaard Brouer2-1/+29
When converting an xdp_frame into an SKB, and sending this into the network stack, then the underlying XDP memory model need to release associated resources, because the network stack don't have callbacks for XDP memory models. The only memory model that needs this is page_pool, when a driver use the DMA-mapping feature. Introduce page_pool_release_page(), which basically does the same as page_pool_unmap_page(). Add xdp_release_frame() as the XDP memory model interface for calling it, if the memory model match MEM_TYPE_PAGE_POOL, to save the function call overhead for others. Have cpumap call xdp_release_frame() before xdp_scrub_frame(). Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19net: page_pool: add helper function to unmap dma addressesIlias Apalodimas1-0/+1
On a previous patch dma addr was stored in 'struct page'. Use that to unmap DMA addresses used by network drivers Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19net: page_pool: add helper function to retrieve dma addressesIlias Apalodimas1-0/+5
On a previous patch dma addr was stored in 'struct page'. Use that to retrieve DMA addresses used by network drivers Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19act_ctinfo: Don't use BIT() in UAPI headers.David S. Miller1-2/+2
Use _BITUL() instead. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19net: flow_offload: implement support for meta keyJiri Pirko1-0/+6
Implement support for previously added flow dissector meta key. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19flow_dissector: add support for ingress ifindex dissectionJiri Pirko2-0/+13
Add new key meta that contains ingress ifindex value and add a function to dissect this from skb. The key and function is prepared to cover other potential skb metadata values dissection. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18ipoib: show VF broadcast addressDenis Kirjanov1-0/+5
in IPoIB case we can't see a VF broadcast address for but can see for PF Before: 11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast state UP mode DEFAULT group default qlen 256 link/infiniband 80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff vf 0 MAC 14:80:00:00:66:fe, spoof checking off, link-state disable, trust off, query_rss off ... After: 11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast state UP mode DEFAULT group default qlen 256 link/infiniband 80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff vf 0 link/infiniband 80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, spoof checking off, link-state disable, trust off, query_rss off v1->v2: add the IFLA_VF_BROADCAST constant v2->v3: put IFLA_VF_BROADCAST at the end to avoid KABI breakage and set NLA_REJECT dev_setlink Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Acked-by: Doug Ledford <dledford@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18ipv6: Stop sending in-kernel notifications for each nexthopIdo Schimmel1-1/+0
Both listeners - mlxsw and netdevsim - of IPv6 FIB notifications are now ready to handle IPv6 multipath notifications. Therefore, stop ignoring such notifications in both drivers and stop sending notification for each added / deleted nexthop. v2: * Remove 'multipath_rt' from 'struct fib6_entry_notifier_info' Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18ipv6: Extend notifier info for multipath routesIdo Schimmel1-0/+7
Extend the IPv6 FIB notifier info with number of sibling routes being notified. This will later allow listeners to process one notification for a multipath routes instead of N, where N is the number of nexthops. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18netlink: Add field to skip in-kernel notificationsIdo Schimmel1-1/+3
The struct includes a 'skip_notify' flag that indicates if netlink notifications to user space should be suppressed. As explained in commit 3b1137fe7482 ("net: ipv6: Change notifications for multipath add to RTA_MULTIPATH"), this is useful to suppress per-nexthop RTM_NEWROUTE notifications when an IPv6 multipath route is added / deleted. Instead, one notification is sent for the entire multipath route. This concept is also useful for in-kernel notifications. Sending one in-kernel notification for the addition / deletion of an IPv6 multipath route - instead of one per-nexthop - provides a significant increase in the insertion / deletion rate to underlying devices. Add a 'skip_notify_kernel' flag to suppress in-kernel notifications. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18netlink: Document all fields of 'struct nl_info'Ido Schimmel1-0/+2
Some fields were not documented. Add documentation. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller306-2448/+547
Honestly all the conflicts were simple overlapping changes, nothing really interesting to report. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds14-10/+63
Pull networking fixes from David Miller: "Lots of bug fixes here: 1) Out of bounds access in __bpf_skc_lookup, from Lorenz Bauer. 2) Fix rate reporting in cfg80211_calculate_bitrate_he(), from John Crispin. 3) Use after free in psock backlog workqueue, from John Fastabend. 4) Fix source port matching in fdb peer flow rule of mlx5, from Raed Salem. 5) Use atomic_inc_not_zero() in fl6_sock_lookup(), from Eric Dumazet. 6) Network header needs to be set for packet redirect in nfp, from John Hurley. 7) Fix udp zerocopy refcnt, from Willem de Bruijn. 8) Don't assume linear buffers in vxlan and geneve error handlers, from Stefano Brivio. 9) Fix TOS matching in mlxsw, from Jiri Pirko. 10) More SCTP cookie memory leak fixes, from Neil Horman. 11) Fix VLAN filtering in rtl8366, from Linus Walluij. 12) Various TCP SACK payload size and fragmentation memory limit fixes from Eric Dumazet. 13) Use after free in pneigh_get_next(), also from Eric Dumazet. 14) LAPB control block leak fix from Jeremy Sowden" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (145 commits) lapb: fixed leak of control-blocks. tipc: purge deferredq list for each grp member in tipc_group_delete ax25: fix inconsistent lock state in ax25_destroy_timer neigh: fix use-after-free read in pneigh_get_next tcp: fix compile error if !CONFIG_SYSCTL hv_sock: Suppress bogus "may be used uninitialized" warnings be2net: Fix number of Rx queues used for flow hashing net: handle 802.1P vlan 0 packets properly tcp: enforce tcp_min_snd_mss in tcp_mtu_probing() tcp: add tcp_min_snd_mss sysctl tcp: tcp_fragment() should apply sane memory limits tcp: limit payload size of sacked skbs Revert "net: phylink: set the autoneg state in phylink_phy_change" bpf: fix nested bpf tracepoints with per-cpu data bpf: Fix out of bounds memory access in bpf_sk_storage vsock/virtio: set SOCK_DONE on peer shutdown net: dsa: rtl8366: Fix up VLAN filtering net: phylink: set the autoneg state in phylink_phy_change net: add high_order_alloc_disable sysctl/static key tcp: add tcp_tx_skb_cache sysctl ...
2019-06-17net: ipv4: move tcp_fastopen server side code to SipHash libraryArd Biesheuvel2-12/+5
Using a bare block cipher in non-crypto code is almost always a bad idea, not only for security reasons (and we've seen some examples of this in the kernel in the past), but also for performance reasons. In the TCP fastopen case, we call into the bare AES block cipher one or two times (depending on whether the connection is IPv4 or IPv6). On most systems, this results in a call chain such as crypto_cipher_encrypt_one(ctx, dst, src) crypto_cipher_crt(tfm)->cit_encrypt_one(crypto_cipher_tfm(tfm), ...); aesni_encrypt kernel_fpu_begin(); aesni_enc(ctx, dst, src); // asm routine kernel_fpu_end(); It is highly unlikely that the use of special AES instructions has a benefit in this case, especially since we are doing the above twice for IPv6 connections, instead of using a transform which can process the entire input in one go. We could switch to the cbcmac(aes) shash, which would at least get rid of the duplicated overhead in *some* cases (i.e., today, only arm64 has an accelerated implementation of cbcmac(aes), while x86 will end up using the generic cbcmac template wrapping the AES-NI cipher, which basically ends up doing exactly the above). However, in the given context, it makes more sense to use a light-weight MAC algorithm that is more suitable for the purpose at hand, such as SipHash. Since the output size of SipHash already matches our chosen value for TCP_FASTOPEN_COOKIE_SIZE, and given that it accepts arbitrary input sizes, this greatly simplifies the code as well. NOTE: Server farms backing a single server IP for load balancing purposes and sharing a single fastopen key will be adversely affected by this change unless all systems in the pool receive their kernel upgrades at the same time. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-16net: stmmac: drop the phy_reset hook from struct stmmac_mdio_bus_dataMartin Blumenstingl1-1/+0
The phy_reset hook is not set anywhere. Drop it to make stmmac_mdio_reset() smaller. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-16net: stmmac: drop the reset delays from struct stmmac_mdio_bus_dataMartin Blumenstingl1-3/+0
Only OF platforms use the reset delays and these delays are only read in stmmac_mdio_reset(). Move them from struct stmmac_mdio_bus_data to a stack variable inside stmmac_mdio_reset() because that's the only usage of these delays. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-16net: stmmac: drop the reset GPIO from struct stmmac_mdio_bus_dataMartin Blumenstingl1-1/+0
No platform uses the "reset_gpio" field from stmmac_mdio_bus_data anymore. Drop it so we don't get any new consumers either. Plain GPIO numbers are being deprecated in favor of GPIO descriptors. If needed any new non-OF platform can add a GPIO descriptor lookup table. devm_gpiod_get_optional() will find the GPIO in that case. Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-16Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "The accumulated fixes from this and last week: - Fix vmalloc TLB flush and map range calculations which lead to stale TLBs, spurious faults and other hard to diagnose issues. - Use fault_in_pages_writable() for prefaulting the user stack in the FPU code as it's less fragile than the current solution - Use the PF_KTHREAD flag when checking for a kernel thread instead of current->mm as the latter can give the wrong answer due to use_mm() - Compute the vmemmap size correctly for KASLR and 5-Level paging. Otherwise this can end up with a way too small vmemmap area. - Make KASAN and 5-level paging work again by making sure that all invalid bits are masked out when computing the P4D offset. This worked before but got broken recently when the LDT remap area was moved. - Prevent a NULL pointer dereference in the resource control code which can be triggered with certain mount options when the requested resource is not available. - Enforce ordering of microcode loading vs. perf initialization on secondary CPUs. Otherwise perf tries to access a non-existing MSR as the boot CPU marked it as available. - Don't stop the resource control group walk early otherwise the control bitmaps are not updated correctly and become inconsistent. - Unbreak kgdb by returning 0 on success from kgdb_arch_set_breakpoint() instead of an error code. - Add more Icelake CPU model defines so depending changes can be queued in other trees" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callback x86/kasan: Fix boot with 5-level paging and KASAN x86/fpu: Don't use current->mm to check for a kthread x86/kgdb: Return 0 from kgdb_arch_set_breakpoint() x86/resctrl: Prevent NULL pointer dereference when local MBM is disabled x86/resctrl: Don't stop walking closids when a locksetup group is found x86/fpu: Update kernel's FPU state before using for the fsave header x86/mm/KASLR: Compute the size of the vmemmap section properly x86/fpu: Use fault_in_pages_writeable() for pre-faulting x86/CPU: Add more Icelake model numbers mm/vmalloc: Avoid rare case of flushing TLB with weird arguments mm/vmalloc: Fix calculation of direct map addr range
2019-06-16tcp: add tcp_min_snd_mss sysctlEric Dumazet1-0/+1
Some TCP peers announce a very small MSS option in their SYN and/or SYN/ACK messages. This forces the stack to send packets with a very high network/cpu overhead. Linux has enforced a minimal value of 48. Since this value includes the size of TCP options, and that the options can consume up to 40 bytes, this means that each segment can include only 8 bytes of payload. In some cases, it can be useful to increase the minimal value to a saner value. We still let the default to 48 (TCP_MIN_SND_MSS), for compatibility reasons. Note that TCP_MAXSEG socket option enforces a minimal value of (TCP_MIN_MSS). David Miller increased this minimal value in commit c39508d6f118 ("tcp: Make TCP_MAXSEG minimum more correct.") from 64 to 88. We might in the future merge TCP_MIN_SND_MSS and TCP_MIN_MSS. CVE-2019-11479 -- tcp mss hardcoded to 48 Signed-off-by: Eric Dumazet <edumazet@google.com> Suggested-by: Jonathan Looney <jtl@netflix.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Bruce Curtis <brucec@netflix.com> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-16tcp: tcp_fragment() should apply sane memory limitsEric Dumazet1-0/+1
Jonathan Looney reported that a malicious peer can force a sender to fragment its retransmit queue into tiny skbs, inflating memory usage and/or overflow 32bit counters. TCP allows an application to queue up to sk_sndbuf bytes, so we need to give some allowance for non malicious splitting of retransmit queue. A new SNMP counter is added to monitor how many times TCP did not allow to split an skb if the allowance was exceeded. Note that this counter might increase in the case applications use SO_SNDBUF socket option to lower sk_sndbuf. CVE-2019-11478 : tcp_fragment, prevent fragmenting a packet when the socket is already using more than half the allowed space Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jonathan Looney <jtl@netflix.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Tyler Hicks <tyhicks@canonical.com> Cc: Bruce Curtis <brucec@netflix.com> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-16tcp: limit payload size of sacked skbsEric Dumazet2-0/+6
Jonathan Looney reported that TCP can trigger the following crash in tcp_shifted_skb() : BUG_ON(tcp_skb_pcount(skb) < pcount); This can happen if the remote peer has advertized the smallest MSS that linux TCP accepts : 48 An skb can hold 17 fragments, and each fragment can hold 32KB on x86, or 64KB on PowerPC. This means that the 16bit witdh of TCP_SKB_CB(skb)->tcp_gso_segs can overflow. Note that tcp_sendmsg() builds skbs with less than 64KB of payload, so this problem needs SACK to be enabled. SACK blocks allow TCP to coalesce multiple skbs in the retransmit queue, thus filling the 17 fragments to maximal capacity. CVE-2019-11477 -- u16 overflow of TCP_SKB_CB(skb)->tcp_gso_segs Fixes: 832d11c5cd07 ("tcp: Try to restore large SKBs while SACK processing") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jonathan Looney <jtl@netflix.com> Acked-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Tyler Hicks <tyhicks@canonical.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Bruce Curtis <brucec@netflix.com> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller1-2/+2
Alexei Starovoitov says: ==================== pull-request: bpf 2019-06-15 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) fix stack layout of JITed x64 bpf code, from Alexei. 2) fix out of bounds memory access in bpf_sk_storage, from Arthur. 3) fix lpm trie walk, from Jonathan. 4) fix nested bpf_perf_event_output, from Matt. 5) and several other fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-16net: sched: remove NET_CLS_IND config optionJiri Pirko2-5/+2
This config option makes only couple of lines optional. Two small helpers and an int in couple of cls structs. Remove the config option and always compile this in. This saves the user from unexpected surprises when he adds a filter with ingress device match which is silently ignored in case the config option is not set. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15net: stmmac: Fix wrapper drivers not detecting PHYJose Abreu1-0/+1
Because of PHYLINK conversion we stopped parsing the phy-handle property from DT. Unfortunatelly, some wrapper drivers still rely on this phy node to configure the PHY. Let's restore the parsing of PHY handle while these wrapper drivers are not fully converted to PHYLINK. Fixes: 74371272f97f ("net: stmmac: Convert to phylink and remove phylib logic") Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callbackBorislav Petkov1-0/+1
Adric Blake reported the following warning during suspend-resume: Enabling non-boot CPUs ... x86: Booting SMP configuration: smpboot: Booting Node 0 Processor 1 APIC 0x2 unchecked MSR access error: WRMSR to 0x10f (tried to write 0x0000000000000000) \ at rIP: 0xffffffff8d267924 (native_write_msr+0x4/0x20) Call Trace: intel_set_tfa intel_pmu_cpu_starting ? x86_pmu_dead_cpu x86_pmu_starting_cpu cpuhp_invoke_callback ? _raw_spin_lock_irqsave notify_cpu_starting start_secondary secondary_startup_64 microcode: sig=0x806ea, pf=0x80, revision=0x96 microcode: updated to revision 0xb4, date = 2019-04-01 CPU1 is up The MSR in question is MSR_TFA_RTM_FORCE_ABORT and that MSR is emulated by microcode. The log above shows that the microcode loader callback happens after the PMU restoration, leading to the conjecture that because the microcode hasn't been updated yet, that MSR is not present yet, leading to the #GP. Add a microcode loader-specific hotplug vector which comes before the PERF vectors and thus executes earlier and makes sure the MSR is present. Fixes: 400816f60c54 ("perf/x86/intel: Implement support for TSX Force Abort") Reported-by: Adric Blake <promarbler14@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Cc: x86@kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=203637
2019-06-15Merge branch 'for-5.2-fixes' of ↵Linus Torvalds2-2/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: "This has an unusually high density of tricky fixes: - task_get_css() could deadlock when it races against a dying cgroup. - cgroup.procs didn't list thread group leaders with live threads. This could mislead readers to think that a cgroup is empty when it's not. Fixed by making PROCS iterator include dead tasks. I made a couple mistakes making this change and this pull request contains a couple follow-up patches. - When cpusets run out of online cpus, it updates cpusmasks of member tasks in bizarre ways. Joel improved the behavior significantly" * 'for-5.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: restore sanity to cpuset_cpus_allowed_fallback() cgroup: Fix css_task_iter_advance_css_set() cset skip condition cgroup: css_task_iter_skip()'d iterators must be advanced before accessed cgroup: Include dying leaders with live threads in PROCS iterations cgroup: Implement css_task_iter_skip() cgroup: Call cgroup_release() before __exit_signal() docs cgroups: add another example size for hugetlb cgroup: Use css_tryget() instead of css_tryget_online() in task_get_css()
2019-06-15Merge tag 'drm-fixes-2019-06-14' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-0/+1
Pull drm fixes from Daniel Vetter: "Nothing unsettling here, also not aware of anything serious still pending. The edid override regression fix took a bit longer since this seems to be an area with an overabundance of bad options. But the fix we have now seems like a good path forward. Next week it should be back to Dave. Summary: - fix regression on amdgpu on SI - fix edid override regression - driver fixes: amdgpu, i915, mediatek, meson, panfrost - fix writecombine for vmap in gem-shmem helper (used by panfrost) - add more panel quirks" * tag 'drm-fixes-2019-06-14' of git://anongit.freedesktop.org/drm/drm: (25 commits) drm/amdgpu: return 0 by default in amdgpu_pm_load_smu_firmware drm/amdgpu: Fix bounds checking in amdgpu_ras_is_supported() drm: add fallback override/firmware EDID modes workaround drm/edid: abstract override/firmware EDID retrieval drm/i915/perf: fix whitelist on Gen10+ drm/i915/sdvo: Implement proper HDMI audio support for SDVO drm/i915: Fix per-pixel alpha with CCS drm/i915/dmc: protect against reading random memory drm/i915/dsi: Use a fuzzy check for burst mode clock check drm/amdgpu/{uvd,vcn}: fetch ring's read_ptr after alloc drm/panfrost: Require the simple_ondemand governor drm/panfrost: make devfreq optional again drm/gem_shmem: Use a writecombine mapping for ->vaddr drm: panel-orientation-quirks: Add quirk for GPD MicroPC drm: panel-orientation-quirks: Add quirk for GPD pocket2 drm/meson: fix G12A primary plane disabling drm/meson: fix primary plane disabling drm/meson: fix G12A HDMI PLL settings for 4K60 1000/1001 variations drm/mediatek: call mtk_dsi_stop() after mtk_drm_crtc_atomic_disable() drm/mediatek: clear num_pipes when unbind driver ...
2019-06-15net: dsa: make cpu_dp non constVivien Didelot1-1/+1
A port may trigger operations on its dedicated CPU port, so using cpu_dp as const will raise warnings. Make cpu_dp non const. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15net: add high_order_alloc_disable sysctl/static keyEric Dumazet1-0/+2
>From linux-3.7, (commit 5640f7685831 "net: use a per task frag allocator") TCP sendmsg() has preferred using order-3 allocations. While it gives good results for most cases, we had reports that heavy uses of TCP over loopback were hitting a spinlock contention in page allocations/freeing. This commits adds a sysctl so that admins can opt-in for order-0 allocations. Hopefully mm layer might optimize order-3 allocations in the future since it could give us a nice boost (see 8 lines of following benchmark) The following benchmark shows a win when more than 8 TCP_STREAM threads are running (56 x86 cores server in my tests) for thr in {1..30} do sysctl -wq net.core.high_order_alloc_disable=0 T0=`./super_netperf $thr -H 127.0.0.1 -l 15` sysctl -wq net.core.high_order_alloc_disable=1 T1=`./super_netperf $thr -H 127.0.0.1 -l 15` echo $thr:$T0:$T1 done 1: 49979: 37267 2: 98745: 76286 3: 141088: 110051 4: 177414: 144772 5: 197587: 173563 6: 215377: 208448 7: 241061: 234087 8: 267155: 263373 9: 295069: 297402 10: 312393: 335213 11: 340462: 368778 12: 371366: 403954 13: 412344: 443713 14: 426617: 473580 15: 474418: 507861 16: 503261: 538539 17: 522331: 563096 18: 532409: 567084 19: 550824: 605240 20: 525493: 641988 21: 564574: 665843 22: 567349: 690868 23: 583846: 710917 24: 588715: 736306 25: 603212: 763494 26: 604083: 792654 27: 602241: 796450 28: 604291: 797993 29: 611610: 833249 30: 577356: 841062 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15tcp: add tcp_tx_skb_cache sysctlEric Dumazet1-1/+3
Feng Tang reported a performance regression after introduction of per TCP socket tx/rx caches, for TCP over loopback (netperf) There is high chance the regression is caused by a change on how well the 32 KB per-thread page (current->task_frag) can be recycled, and lack of pcp caches for order-3 pages. I could not reproduce the regression myself, cpus all being spinning on the mm spinlocks for page allocs/freeing, regardless of enabling or disabling the per tcp socket caches. It seems best to disable the feature by default, and let admins enabling it. MM layer either needs to provide scalable order-3 pages allocations, or could attempt a trylock on zone->lock if the caller only attempts to get a high-order page and is able to fallback to order-0 ones in case of pressure. Tests run on a 56 cores host (112 hyper threads) - 35.49% netperf [kernel.vmlinux] [k] queued_spin_lock_slowpath - 35.49% queued_spin_lock_slowpath - 18.18% get_page_from_freelist - __alloc_pages_nodemask - 18.18% alloc_pages_current skb_page_frag_refill sk_page_frag_refill tcp_sendmsg_locked tcp_sendmsg inet_sendmsg sock_sendmsg __sys_sendto __x64_sys_sendto do_syscall_64 entry_SYSCALL_64_after_hwframe __libc_send + 17.31% __free_pages_ok + 31.43% swapper [kernel.vmlinux] [k] intel_idle + 9.12% netperf [kernel.vmlinux] [k] copy_user_enhanced_fast_string + 6.53% netserver [kernel.vmlinux] [k] copy_user_enhanced_fast_string + 0.69% netserver [kernel.vmlinux] [k] queued_spin_lock_slowpath + 0.68% netperf [kernel.vmlinux] [k] skb_release_data + 0.52% netperf [kernel.vmlinux] [k] tcp_sendmsg_locked 0.46% netperf [kernel.vmlinux] [k] _raw_spin_lock_irqsave Fixes: 472c2e07eef0 ("tcp: add one skb cache for tx") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Feng Tang <feng.tang@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15tcp: add tcp_rx_skb_cache sysctlEric Dumazet1-4/+2
Instead of relying on rps_needed, it is safer to use a separate static key, since we do not want to enable TCP rx_skb_cache by default. This feature can cause huge increase of memory usage on hosts with millions of sockets. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15sysctl: define proc_do_static_key()Eric Dumazet2-1/+3
Convert proc_dointvec_minmax_bpf_stats() into a more generic helper, since we are going to use jump labels more often. Note that sysctl_bpf_stats_enabled is removed, since it is no longer needed/used. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15ipv4: tcp: fix ACK/RST sent with a transmit delayEric Dumazet2-4/+7
If we want to set a EDT time for the skb we want to send via ip_send_unicast_reply(), we have to pass a new parameter and initialize ipc.sockc.transmit_time with it. This fixes the EDT time for ACK/RST packets sent on behalf of a TIME_WAIT socket. Fixes: a842fe1425cb ("tcp: add optional per socket transmit delay") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15Merge tag 'mlx5-updates-2019-06-13' of ↵David S. Miller2-4/+19
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2019-06-13 Mlx5 devlink health fw reporters and sw reset support This series provides mlx5 firmware reset support and firmware devlink health reporters. 1) Add initial mlx5 kernel documentation and include devlink health reporters 2) Add CR-Space access and FW Crdump snapshot support via devlink region_snapshot 3) Issue software reset upon FW asserts 4) Add fw and fw_fatal devlink heath reporters to follow fw errors indication by dump and recover procedures and enable trigger these functionality by user. 4.1) fw reporter: The fw reporter implements diagnose and dump callbacks. It follows symptoms of fw error such as fw syndrome by triggering fw core dump and storing it and any other fw trace into the dump buffer. The fw reporter diagnose command can be triggered any time by the user to check current fw status. 4.2) fw_fatal repoter: The fw_fatal reporter implements dump and recover callbacks. It follows fatal errors indications by CR-space dump and recover flow. The CR-space dump uses vsc interface which is valid even if the FW command interface is not functional, which is the case in most FW fatal errors. The CR-space dump is stored as a memory region snapshot to ease read by address. The recover function runs recover flow which reloads the driver and triggers fw reset if needed. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15locking/static_key: always define static_branch_deferred_incWillem de Bruijn1-2/+3
This interface is currently only defined if CONFIG_JUMP_LABEL. Make it available also when jump labels are off. Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15net: stmmac: use GPIO descriptors in stmmac_mdio_resetMartin Blumenstingl1-1/+1
Switch stmmac_mdio_reset to use GPIO descriptors. GPIO core handles the "snps,reset-gpio" for GPIO descriptors so we don't need to take care of it inside the driver anymore. The advantage of this is that we now preserve the GPIO flags which are passed via devicetree. This is required on some newer Amlogic boards which use an Open Drain pin for the reset GPIO. This pin can only output a LOW signal or switch to input mode but it cannot output a HIGH signal. There are already devicetree bindings for these special cases and GPIO core already takes care of them but only if we use GPIO descriptors instead of GPIO numbers. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14Merge tag 'mac80211-next-for-davem-2019-06-14' of ↵David S. Miller5-31/+124
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Many changes all over: * HE (802.11ax) work continues * WPA3 offloads * work on extended key ID handling continues * fixes to honour AP supported rates with auth/assoc frames * nl80211 netlink policy improvements to fix some issues with strict validation on new commands with old attrs ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14Merge tag 'mac80211-for-davem-2019-06-14' of ↵David S. Miller1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Various fixes, all over: * a few memory leaks * fixes for management frame protection security and A2/A3 confusion (affecting TDLS as well) * build fix for certificates * etc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14net: phylink: further mac_config documentation improvementsRussell King - ARM Linux admin1-1/+12
While reviewing the DPAA2 work, it has become apparent that we need better documentation about which members of the phylink link state structure are valid in the mac_config call. Improve this documentation. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14Merge branch 'akpm' (patches from Andrew)Linus Torvalds5-14/+80
Merge misc fixes from Andrew Morton: "16 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/devm_memremap_pages: fix final page put race PCI/P2PDMA: track pgmap references per resource, not globally lib/genalloc: introduce chunk owners PCI/P2PDMA: fix the gen_pool_add_virt() failure path mm/devm_memremap_pages: introduce devm_memunmap_pages drivers/base/devres: introduce devm_release_action() mm/vmscan.c: fix trying to reclaim unevictable LRU page coredump: fix race condition between collapse_huge_page() and core dumping mm/mlock.c: change count_mm_mlocked_page_nr return type mm: mmu_gather: remove __tlb_reset_range() for force flush fs/ocfs2: fix race in ocfs2_dentry_attach_lock() mm/vmscan.c: fix recent_rotated history mm/mlock.c: mlockall error for flag MCL_ONFAULT scripts/decode_stacktrace.sh: prefix addr2line with $CROSS_COMPILE mm/list_lru.c: fix memory leak in __memcg_init_list_lru_node mm: memcontrol: don't batch updates of local VM stats and events
2019-06-14Merge tag 'sound-5.2-rc5' of ↵Linus Torvalds5-13/+42
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "It might feel like deja vu to receive a bulk of changes at rc5, and it happens again; we've got a collection of fixes for ASoC. Most of fixes are targeted for the newly merged SOF (Sound Open Firmware) stuff and the relevant fixes for Intel platforms. Other than that, there are a few regression fixes for the recent ASoC core changes and HD-audio quirk, as well as a couple of FireWire fixes and for other ASoC codecs" * tag 'sound-5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (54 commits) Revert "ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops" ALSA: ice1712: Check correct return value to snd_i2c_sendbytes (EWS/DMX 6Fire) ALSA: oxfw: allow PCM capture for Stanton SCS.1m ALSA: firewire-motu: fix destruction of data for isochronous resources ASoC: Intel: sst: fix kmalloc call with wrong flags ASoC: core: Fix deadlock in snd_soc_instantiate_card() SoC: rt274: Fix internal jack assignment in set_jack callback ALSA: hdac: fix memory release for SST and SOF drivers ASoC: SOF: Intel: hda: use the defined ppcap functions ASoC: core: move DAI pre-links initiation to snd_soc_instantiate_card ASoC: Intel: cht_bsw_rt5672: fix kernel oops with platform_name override ASoC: Intel: cht_bsw_nau8824: fix kernel oops with platform_name override ASoC: Intel: bytcht_es8316: fix kernel oops with platform_name override ASoC: Intel: cht_bsw_max98090: fix kernel oops with platform_name override ASoC: sun4i-i2s: Add offset to RX channel select ASoC: sun4i-i2s: Fix sun8i tx channel offset mask ASoC: max98090: remove 24-bit format support if RJ is 0 ASoC: da7219: Fix build error without CONFIG_I2C ASoC: SOF: Intel: hda: Fix COMPILE_TEST build error ASoC: SOF: fix DSP oops definitions in FW ABI ...
2019-06-14nl80211: send event when CMD_FRAME duration expiresJames Prestwood1-0/+10
cfg80211_remain_on_channel_expired is used to notify userspace when the remain on channel duration expired by sending an event. There is no such equivalent to CMD_FRAME, where if offchannel and a duration is provided, the card will go offchannel for that duration. Currently there is no way for userspace to tell when that duration expired apart from setting an independent timeout. This timeout is quite erroneous as the kernel may not immediately send out the frame because of scheduling or work queue delays. In testing, it was found this timeout had to be quite large to accomidate any potential delays. A better solution is to have the kernel send an event when this duration has expired. There is already NL80211_CMD_FRAME_WAIT_CANCEL which can be used to cancel a NL80211_CMD_FRAME offchannel. Using this command matches perfectly to how NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL works, where its both used to cancel and notify if the duration has expired. Signed-off-by: James Prestwood <james.prestwood@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14mac80211: call rate_control_send_low() internallyJohannes Berg1-23/+0
There's no rate control algorithm that *doesn't* want to call it internally, and calling it internally will let us modify its behaviour in the future. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-29 19:21:05 +0300