summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2022-03-29rtc: mc146818-lib: Fix the AltCentury for AMD platformsMario Limonciello1-0/+2
Setting the century forward has been failing on AMD platforms. There was a previous attempt at fixing this for family 0x17 as part of commit 7ad295d5196a ("rtc: Fix the AltCentury value on AMD/Hygon platform") but this was later reverted due to some problems reported that appeared to stem from an FW bug on a family 0x17 desktop system. The same comments mentioned in the previous commit continue to apply to the newer platforms as well. ``` MC146818 driver use function mc146818_set_time() to set register RTC_FREQ_SELECT(RTC_REG_A)'s bit4-bit6 field which means divider stage reset value on Intel platform to 0x7. While AMD/Hygon RTC_REG_A(0Ah)'s bit4 is defined as DV0 [Reference]: DV0 = 0 selects Bank 0, DV0 = 1 selects Bank 1. Bit5-bit6 is defined as reserved. DV0 is set to 1, it will select Bank 1, which will disable AltCentury register(0x32) access. As UEFI pass acpi_gbl_FADT.century 0x32 (AltCentury), the CMOS write will be failed on code: CMOS_WRITE(century, acpi_gbl_FADT.century). Correct RTC_REG_A bank select bit(DV0) to 0 on AMD/Hygon CPUs, it will enable AltCentury(0x32) register writing and finally setup century as expected. ``` However in closer examination the change previously submitted was also modifying bits 5 & 6 which are declared reserved in the AMD documentation. So instead modify just the DV0 bank selection bit. Being cognizant that there was a failure reported before, split the code change out to a static function that can also be used for exclusions if any regressions such as Mikhail's pop up again. Cc: Jinke Fan <fanjinke@hygon.cn> Cc: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Link: https://lore.kernel.org/all/CABXGCsMLob0DC25JS8wwAYydnDoHBSoMh2_YLPfqm3TTvDE-Zw@mail.gmail.com/ Link: https://www.amd.com/system/files/TechDocs/51192_Bolton_FCH_RRG.pdf Signed-off-by: Raul E Rangel <rrangel@chromium.org> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220111225750.1699-1-mario.limonciello@amd.com
2022-03-29Merge tag 'devprop-5.18-rc1' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties code update from Rafael Wysocki: "This is based on new i2c material for 5.18-rc1 and simply reorganizes the code on top of it so as to group similar functions together (Andy Shevchenko)" * tag 'devprop-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: device property: Don't split fwnode_get_irq*() APIs in the code
2022-03-29Merge tag 'pm-5.18-rc1-2' of ↵Linus Torvalds2-1/+13
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These update ARM cpufreq drivers, the OPP (Operating Performance Points) library and the power management documentation. Specifics: - Add per core DVFS support for QCom SoC (Bjorn Andersson), convert to yaml binding (Manivannan Sadhasivam) and various other fixes to the QCom drivers (Luca Weiss). - Add OPP table for imx7s SoC (Denys Drozdov) and minor fixes (Stefan Agner). - Fix CPPC driver's freq/performance conversions (Pierre Gondois). - Minor generic cleanups (Yury Norov). - Introduce opp-microwatt property to the OPP core, bindings, etc (Lukasz Luba). - Convert DT bindings to schema format and various related fixes (Yassine Oudjana). - Expose OPP's OF node in debugfs (Viresh Kumar). - Add Intel uncore frequency scaling documentation file to its MAINTAINERS entry (Srinivas Pandruvada). - Clean up the AMD P-state driver documentation (Jan Engelhardt)" * tag 'pm-5.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits) Documentation: amd-pstate: grammar and sentence structure updates dt-bindings: cpufreq: cpufreq-qcom-hw: Convert to YAML bindings dt-bindings: dvfs: Use MediaTek CPUFREQ HW as an example Documentation: EM: Describe new registration method using DT OPP: Add support of "opp-microwatt" for EM registration PM: EM: add macro to set .active_power() callback conditionally OPP: Add "opp-microwatt" supporting code dt-bindings: opp: Add "opp-microwatt" entry in the OPP MAINTAINERS: Add additional file to uncore frequency control cpufreq: blocklist Qualcomm sc8280xp and sa8540p in cpufreq-dt-platdev cpufreq: qcom-hw: Add support for per-core-dcvs dt-bindings: power: avs: qcom,cpr: Convert to DT schema arm64: dts: qcom: qcs404: Rename CPU and CPR OPP tables arm64: dts: qcom: msm8996: Rename cluster OPP tables dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema dt-bindings: opp: qcom-opp: Convert to DT schema arm64: dts: qcom: msm8996-mtp: Add msm8996 compatible dt-bindings: arm: qcom: Add msm8996 and apq8096 compatibles opp: Expose of-node's name in debugfs cpufreq: CPPC: Fix performance/frequency conversion ...
2022-03-29Merge branches 'clk-sifive' and 'clk-visconti' into clk-nextStephen Boyd2-13/+13
* clk-sifive: clk: sifive: Move all stuff into SoCs header files from C files clk: sifive: Add SoCs prefix in each SoCs-dependent data riscv: dts: Change the macro name of prci in each device node dt-bindings: change the macro name of prci in header files and example clk: sifive: duplicate the macro definitions for the time being * clk-visconti: clk: visconti: prevent array overflow in visconti_clk_register_gates()
2022-03-29Merge branches 'clk-range', 'clk-uniphier', 'clk-apple' and 'clk-qcom' into ↵Stephen Boyd10-1/+188
clk-next - Make clk_set_rate_range() re-evaluate the limits each time - Introduce various clk_set_rate_range() tests - Add clk_drop_range() to drop a previously set range - Support for NCO blocks on Apple SoCs * clk-range: clk: Drop the rate range on clk_put() clk: test: Test clk_set_rate_range on orphan mux clk: Initialize orphan req_rate clk: bcm: rpi: Run some clocks at the minimum rate allowed clk: bcm: rpi: Set a default minimum rate clk: bcm: rpi: Add variant structure clk: Add clk_drop_range clk: Always set the rate on clk_set_range_rate clk: Use clamp instead of open-coding our own clk: Always clamp the rounded rate clk: Enforce that disjoints limits are invalid clk: Introduce Kunit Tests for the framework clk: Fix clk_hw_get_clk() when dev is NULL * clk-uniphier: clk: uniphier: Fix fixed-rate initialization * clk-apple: clk: clk-apple-nco: Allow and fix module building MAINTAINERS: Add clk-apple-nco under ARM/APPLE MACHINE clk: clk-apple-nco: Add driver for Apple NCO dt-bindings: clock: Add Apple NCO * clk-qcom: (61 commits) clk: qcom: gcc-msm8994: Fix gpll4 width dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml clk: qcom: Add display clock controller driver for SM6125 dt-bindings: clock: add QCOM SM6125 display clock bindings clk: qcom: Fix sorting of SDX_GCC_65 in Makefile and Kconfig clk: qcom: gcc: Add emac GDSC support for SM8150 clk: qcom: gcc: sm8150: Fix some identation issues clk: qcom: gcc: Add UFS_CARD and UFS_PHY GDSCs for SM8150 clk: qcom: gcc: Add PCIe0 and PCIe1 GDSC for SM8150 clk: qcom: clk-rcg2: Update the frac table for pixel clock clk: qcom: clk-rcg2: Update logic to calculate D value for RCG clk: qcom: smd: Add missing MSM8998 RPM clocks clk: qcom: smd: Add missing RPM clocks for msm8992/4 dt-bindings: clock: qcom: rpmcc: Add RPM Modem SubSystem (MSS) clocks clk: qcom: gcc-ipq806x: add CryptoEngine resets dt-bindings: reset: add ipq8064 ce5 resets clk: qcom: gcc-ipq806x: add CryptoEngine clocks dt-bindings: clock: add ipq8064 ce5 clk define clk: qcom: gcc-ipq806x: add additional freq for sdc table clk: qcom: clk-rcg: add clk_rcg_floor_ops ops ...
2022-03-29Merge branches 'clk-starfive', 'clk-ti', 'clk-terminate' and 'clk-cleanup' ↵Stephen Boyd4-359/+41
into clk-next - Audio clks on StarFive JH7100 RISC-V SoC - Terminate arrays with sentinels and make that clearer - Cleanup SPDX tags - Fix typos in comments * clk-starfive: clk: starfive: Add JH7100 audio clock driver clk: starfive: jh7100: Support more clock types clk: starfive: jh7100: Make hw clock implementation reusable dt-bindings: clock: Add starfive,jh7100-audclk bindings dt-bindings: clock: Add JH7100 audio clock definitions clk: starfive: jh7100: Handle audio_div clock properly clk: starfive: jh7100: Don't round divisor up twice * clk-ti: clk: ti: Drop legacy compatibility clocks for dra7 clk: ti: Drop legacy compatibility clocks for am4 clk: ti: Drop legacy compatibility clocks for am3 clk: ti: Update component clocks to use ti_dt_clk_name() clk: ti: Update pll and clockdomain clocks to use ti_dt_clk_name() clk: ti: Add ti_dt_clk_name() helper to use clock-output-names clk: ti: Use clock-output-names for clkctrl clk: ti: Add ti_find_clock_provider() to use clock-output-names clk: ti: Optionally parse IO address from parent clock node clk: ti: Preserve node in ti_dt_clocks_register() clk: ti: Constify clkctrl_name * clk-terminate: clk: actions: Make sentinel elements more obvious clk: clps711x: Terminate clk_div_table with sentinel element clk: hisilicon: Terminate clk_div_table with sentinel element clk: loongson1: Terminate clk_div_table with sentinel element clk: actions: Terminate clk_div_table with sentinel element * clk-cleanup: clk: zynq: Update the parameters to zynq_clk_register_periph_clk clk: zynq: trivial warning fix clk: qcom: sm6125-gcc: fix typos in comments clk: ti: clkctrl: fix typos in comments clk: COMMON_CLK_LAN966X should depend on SOC_LAN966 clk: Use of_device_get_match_data() clk: bcm2835: Remove unused variable clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver clk: cleanup comments clk: socfpga: cleanup spdx tags
2022-03-29Merge branches 'clk-mvebu', 'clk-const', 'clk-imx' and 'clk-rockchip' into ↵Stephen Boyd3-6/+279
clk-next - Mark mux table as const in clk-mux - Make the all_lists array const * clk-mvebu: clk: mvebu: use time_is_before_eq_jiffies() instead of open coding it * clk-const: clk: Mark clk_core_evict_parent_cache_subtree() 'target' const clk: Mark 'all_lists' as const clk: pistachio: Declare mux table as const u32[] clk: qcom: Declare mux table as const u32[] clk: mmp: Declare mux tables as const u32[] clk: hisilicon: Remove unnecessary cast of mux table to u32 * clk: mux: Declare u32 *table parameter as const clk: nxp: Declare mux table parameter as const u32 * clk: nxp: Remove unused variable * clk-imx: (28 commits) dt-bindings: clock: drop useless consumer example clk: imx: Select MXC_CLK for i.MX93 clock driver clk: imx: remove redundant re-assignment of pll->base MAINTAINERS: clk: imx: add git tree and dt-bindings files clk: imx: pll14xx: Support dynamic rates clk: imx: pll14xx: Add pr_fmt clk: imx: pll14xx: explicitly return lowest rate clk: imx: pll14xx: name variables after usage clk: imx: pll14xx: consolidate rate calculation clk: imx: pll14xx: Use FIELD_GET/FIELD_PREP clk: imx: pll14xx: Drop wrong shifting clk: imx: pll14xx: Use register defines consistently clk: imx8mp: remove SYS PLL 1/2 clock gates clk: imx8mn: remove SYS PLL 1/2 clock gates clk: imx8mm: remove SYS PLL 1/2 clock gates clk: imx: add i.MX93 clk clk: imx: support fracn gppll clk: imx: add i.MX93 composite clk dt-bindings: clock: add i.MX93 clock definition dt-bindings: clock: Add imx93 clock support ... * clk-rockchip: clk: rockchip: re-add rational best approximation algorithm to the fractional divider clk/rockchip: Use of_device_get_match_data() clk: rockchip: Add CLK_SET_RATE_PARENT to the HDMI reference clock on rk3568 clk: rockchip: drop CLK_SET_RATE_PARENT from dclk_vop* on rk3568 clk: rockchip: Add more PLL rates for rk3568
2022-03-29Merge branches 'clk-xilinx', 'clk-kunit', 'clk-cs2000' and 'clk-renesas' ↵Stephen Boyd3-0/+246
into clk-next - Kunit tests for clk-gate implementation - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add support for dynamic mode * clk-xilinx: clk: zynqmp: replace warn_once with pr_debug for failed clock ops * clk-kunit: clk: gate: Add some kunit test suites * clk-cs2000: clk: cs2000-cp: convert driver to regmap clk: cs2000-cp: freeze config during register fiddling clk: cs2000-cp: make clock skip setting configurable clk: cs2000-cp: add support for dynamic mode clk: cs2000-cp: Make aux output function controllable dt-bindings: clock: cs2000-cp: document cirrus,dynamic-mode dt-bindings: clock: cs2000-cp: document cirrus,clock-skip flag dt-bindings: clock: cs2000-cp: document aux-output-source dt-bindings: clock: convert cs2000-cp bindings to yaml * clk-renesas: dt-bindings: clock: renesas: Make example 'clocks' parsable clk: rs9: Add Renesas 9-series PCIe clock generator driver clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index() dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator clk: renesas: r8a779f0: Add PFC clock clk: renesas: r8a779f0: Add I2C clocks clk: renesas: r8a779f0: Add WDT clock clk: renesas: r8a779f0: Fix RSW2 clock divider clk: renesas: rzg2l-cpg: Add support for RZ/V2L SoC dt-bindings: clock: renesas: Document RZ/V2L SoC dt-bindings: clock: Add R9A07G054 CPG Clock and Reset Definitions clk: renesas: r8a779a0: Add CANFD module clock clk: renesas: r9a07g044: Update multiplier and divider values for PLL2/3 clk: renesas: r8a7799[05]: Add MLP clocks clk: renesas: r8a779f0: Add SYS-DMAC clocks
2022-03-29Merge branches 'clk-microchip', 'clk-si', 'clk-mtk', 'clk-at91' and 'clk-st' ↵Stephen Boyd2-0/+47
into clk-next - Clock configuration on Microchip PolarFire SoCs - Free allocations on probe error in Mediatek clk driver - Modernize Mediatek clk driver by consolidating code * clk-microchip: clk: microchip: Add driver for Microchip PolarFire SoC dt-bindings: clk: microchip: Add Microchip PolarFire host binding * clk-si: clk-si5341: replace snprintf in show functions with sysfs_emit clk: si5341: fix reported clk_rate when output divider is 2 * clk-mtk: (32 commits) clk: mediatek: Warn if clk IDs are duplicated clk: mediatek: mt8195: Implement remove functions clk: mediatek: mt8195: Implement error handling in probe functions clk: mediatek: mt8195: Hook up mtk_clk_simple_remove() clk: mediatek: Unregister clks in mtk_clk_simple_probe() error path clk: mediatek: mtk: Implement error handling in register APIs clk: mediatek: pll: Implement error handling in register API clk: mediatek: mux: Implement error handling in register API clk: mediatek: mux: Reverse check for existing clk to reduce nesting level clk: mediatek: gate: Implement error handling in register API clk: mediatek: cpumux: Implement error handling in register API clk: mediatek: mtk: Clean up included headers clk: mediatek: Add mtk_clk_simple_remove() clk: mediatek: Implement mtk_clk_unregister_composites() API clk: mediatek: Implement mtk_clk_unregister_divider_clks() API clk: mediatek: Implement mtk_clk_unregister_factors() API clk: mediatek: Implement mtk_clk_unregister_fixed_clks() API clk: mediatek: pll: Clean up included headers clk: mediatek: pll: Implement unregister API clk: mediatek: pll: Split definitions into separate header file ... * clk-at91: clk: at91: clk-master: remove dead code clk: at91: sama7g5: fix parents of PDMCs' GCLK clk: at91: sama7g5: Allow MCK1 to be exported and referenced in DT clk: at91: allow setting PMC_AUDIOPINCK clock parents via DT * clk-st: clk: stm32mp1: Add parent_data to ETHRX clock clk: stm32mp1: Split ETHCK_K into separate MUX and GATE clock
2022-03-29Merge tag 'dma-mapping-5.18' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-0/+31
Pull dma-mapping updates from Christoph Hellwig: - do not zero buffer in set_memory_decrypted (Kirill A. Shutemov) - fix return value of dma-debug __setup handlers (Randy Dunlap) - swiotlb cleanups (Robin Murphy) - remove most remaining users of the pci-dma-compat.h API (Christophe JAILLET) - share the ABI header for the DMA map_benchmark with userspace (Tian Tao) - update the maintainer for DMA MAPPING BENCHMARK (Xiang Chen) - remove CONFIG_DMA_REMAP (me) * tag 'dma-mapping-5.18' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: benchmark: extract a common header file for map_benchmark definition dma-debug: fix return value of __setup handlers dma-mapping: remove CONFIG_DMA_REMAP media: v4l2-pci-skeleton: Remove usage of the deprecated "pci-dma-compat.h" API rapidio/tsi721: Remove usage of the deprecated "pci-dma-compat.h" API sparc: Remove usage of the deprecated "pci-dma-compat.h" API agp/intel: Remove usage of the deprecated "pci-dma-compat.h" API alpha: Remove usage of the deprecated "pci-dma-compat.h" API MAINTAINERS: update maintainer list of DMA MAPPING BENCHMARK swiotlb: simplify array allocation swiotlb: tidy up includes swiotlb: simplify debugfs setup swiotlb: do not zero buffer in set_memory_decrypted()
2022-03-29nvme: allow duplicate NSIDs for private namespacesSungup Moon1-0/+1
A NVMe subsystem with multiple controller can have private namespaces that use the same NSID under some conditions: "If Namespace Management, ANA Reporting, or NVM Sets are supported, the NSIDs shall be unique within the NVM subsystem. If the Namespace Management, ANA Reporting, and NVM Sets are not supported, then NSIDs: a) for shared namespace shall be unique; and b) for private namespace are not required to be unique." Reference: Section 6.1.6 NSID and Namespace Usage; NVM Express 1.4c spec. Make sure this specific setup is supported in Linux. Fixes: 9ad1927a3bc2 ("nvme: always search for namespace head") Signed-off-by: Sungup Moon <sungup.moon@samsung.com> [hch: refactored and fixed the controller vs subsystem based naming conflict] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2022-03-29kprobes: Use rethook for kretprobe if possibleMasami Hiramatsu1-2/+49
Use rethook for kretprobe function return hooking if the arch sets CONFIG_HAVE_RETHOOK=y. In this case, CONFIG_KRETPROBE_ON_RETHOOK is set to 'y' automatically, and the kretprobe internal data fields switches to use rethook. If not, it continues to use kretprobe specific function return hooks. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/164826162556.2455864.12255833167233452047.stgit@devnote2
2022-03-29Merge tag 'ptrace-cleanups-for-v5.18' of ↵Linus Torvalds10-276/+171
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull ptrace cleanups from Eric Biederman: "This set of changes removes tracehook.h, moves modification of all of the ptrace fields inside of siglock to remove races, adds a missing permission check to ptrace.c The removal of tracehook.h is quite significant as it has been a major source of confusion in recent years. Much of that confusion was around task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the semantics clearer). For people who don't know tracehook.h is a vestiage of an attempt to implement uprobes like functionality that was never fully merged, and was later superseeded by uprobes when uprobes was merged. For many years now we have been removing what tracehook functionaly a little bit at a time. To the point where anything left in tracehook.h was some weird strange thing that was difficult to understand" * tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ptrace: Remove duplicated include in ptrace.c ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE ptrace: Return the signal to continue with from ptrace_stop ptrace: Move setting/clearing ptrace_message into ptrace_stop tracehook: Remove tracehook.h resume_user_mode: Move to resume_user_mode.h resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume signal: Move set_notify_signal and clear_notify_signal into sched/signal.h task_work: Decouple TIF_NOTIFY_SIGNAL and task_work task_work: Call tracehook_notify_signal from get_signal on all architectures task_work: Introduce task_work_pending task_work: Remove unnecessary include from posix_timers.h ptrace: Remove tracehook_signal_handler ptrace: Remove arch_syscall_{enter,exit}_tracehook ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h ptrace/arm: Rename tracehook_report_syscall report_syscall ptrace: Move ptrace_report_syscall into ptrace.h
2022-03-29Merge tag 'net-5.18-rc0' of ↵Linus Torvalds2-11/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter. Current release - regressions: - llc: only change llc->dev when bind() succeeds, fix null-deref Current release - new code bugs: - smc: fix a memory leak in smc_sysctl_net_exit() - dsa: realtek: make interface drivers depend on OF Previous releases - regressions: - sched: act_ct: fix ref leak when switching zones Previous releases - always broken: - netfilter: egress: report interface as outgoing - vsock/virtio: enable VQs early on probe and finish the setup before using them Misc: - memcg: enable accounting for nft objects" * tag 'net-5.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (39 commits) Revert "selftests: net: Add tls config dependency for tls selftests" net/smc: Send out the remaining data in sndbuf before close net: move net_unlink_todo() out of the header net: dsa: bcm_sf2_cfp: fix an incorrect NULL check on list iterator net: bnxt_ptp: fix compilation error selftests: net: Add tls config dependency for tls selftests memcg: enable accounting for nft objects net/sched: act_ct: fix ref leak when switching zones net/smc: fix a memory leak in smc_sysctl_net_exit() selftests: tls: skip cmsg_to_pipe tests with TLS=n octeontx2-af: initialize action variable net: sparx5: switchdev: fix possible NULL pointer dereference net/x25: Fix null-ptr-deref caused by x25_disconnect qlcnic: dcb: default to returning -EOPNOTSUPP net: sparx5: depends on PTP_1588_CLOCK_OPTIONAL net: hns3: fix phy can not link up when autoneg off and reset net: hns3: add NULL pointer check for hns3_set/get_ringparam() net: hns3: add netdev reset check for hns3_set_tunable() net: hns3: clean residual vf config after disable sriov net: hns3: add max order judgement for tx spare buffer ...
2022-03-29net: move net_unlink_todo() out of the headerJohannes Berg1-10/+0
There's no reason for this to be in netdevice.h, it's all just used in dev.c. Also make it no longer inline and let the compiler decide to do that by itself. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20220325225023.f49b9056fe1c.I6b901a2df00000837a9bd251a8dd259bd23f5ded@changeid Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-29Merge tag 'for-linus-5.18-rc1-tag' of ↵Linus Torvalds1-11/+2
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - A bunch of minor cleanups - A fix for kexec in Xen dom0 when executed on a high cpu number - A fix for resuming after suspend of a Xen guest with assigned PCI devices - A fix for a crash due to not disabled preemption when resuming as Xen dom0 * tag 'for-linus-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: fix is_xen_pmu() xen: don't hang when resuming PCI device arch:x86:xen: Remove unnecessary assignment in xen_apic_read() xen/grant-table: remove readonly parameter from functions xen/grant-table: remove gnttab_*transfer*() functions drivers/xen: use helper macro __ATTR_RW x86/xen: Fix kerneldoc warning xen: delay xen_hvm_init_time_ops() if kdump is boot on vcpu>=32 xen: use time_is_before_eq_jiffies() instead of open coding it
2022-03-28vdpa: support exposing the count of vqs to userspaceLongpeng1-0/+3
- GET_VQS_COUNT: the count of virtqueues that exposed Signed-off-by: Longpeng <longpeng2@huawei.com> Link: https://lore.kernel.org/r/20220315032553.455-4-longpeng2@huawei.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Longpeng &lt;<a href="mailto:longpeng2@huawei.com" target="_blank">longpeng2@huawei.com</a>&gt;<br> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2022-03-28vdpa: change the type of nvqs to u32Longpeng1-3/+3
Change vdpa_device.nvqs and vhost_vdpa.nvqs to use u32 Signed-off-by: Longpeng <longpeng2@huawei.com> Link: https://lore.kernel.org/r/20220315032553.455-3-longpeng2@huawei.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Longpeng &lt;<a href="mailto:longpeng2@huawei.com" target="_blank">longpeng2@huawei.com</a>&gt;<br></blockquote><div><br></div><div>Acked-by: Jason Wang &lt;<a href="mailto:jasowang@redhat.com">jasowang@redhat.com</a>&gt;</div><div> </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2022-03-28vdpa: support exposing the config size to userspaceLongpeng2-1/+6
- GET_CONFIG_SIZE: return the size of the virtio config space. The size contains the fields which are conditional on feature bits. Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Longpeng <longpeng2@huawei.com> Link: https://lore.kernel.org/r/20220315032553.455-2-longpeng2@huawei.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2022-03-28virtio-crypto: introduce akcipher servicezhenwei pi1-1/+80
Introduce asymmetric service definition, asymmetric operations and several well known algorithms. Co-developed-by: lei he <helei.sig11@bytedance.com> Signed-off-by: lei he <helei.sig11@bytedance.com> Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Link: https://lore.kernel.org/r/20220302033917.1295334-3-pizhenwei@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Gonglei <arei.gonglei@huawei.com>
2022-03-28virtio_crypto: Introduce VIRTIO_CRYPTO_NOSPCzhenwei pi1-0/+1
Base on the lastest virtio crypto spec, define VIRTIO_CRYPTO_NOSPC. Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Link: https://lore.kernel.org/r/20220302033917.1295334-2-pizhenwei@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-28Add definition of VIRTIO_F_IN_ORDER feature bitGautam Dawar1-0/+6
This patch adds the definition of VIRTIO_F_IN_ORDER feature bit in the relevant header file to make it available in QEMU's linux standard header file virtio_config.h, which is updated using scripts/update-linux-headers.sh Signed-off-by: Gautam Dawar <gdawar@xilinx.com> Link: https://lore.kernel.org/r/20220215053430.24650-1-gdawar@xilinx.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-03-28mm/balloon_compaction: make balloon page compaction callbacks staticMiaohe Lin1-22/+0
Since commit b1123ea6d3b3 ("mm: balloon: use general non-lru movable page feature"), these functions are called via balloon_aops callbacks. They're not called directly outside this file. So make them static and clean up the relevant code. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Link: https://lore.kernel.org/r/20220125132221.2220-1-linmiaohe@huawei.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com>
2022-03-28Merge tag 'tty-5.18-rc1' of ↵Linus Torvalds6-4/+32
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here are the big set of tty and serial driver changes for 5.18-rc1. Nothing major, some more good cleanups from Jiri and 2 new serial drivers. Highlights include: - termbits cleanups - export symbol cleanups and other core cleanups from Jiri Slaby - new sunplus and mvebu uart drivers (amazing that people are still creating new uarts...) - samsung serial driver cleanups - ldisc 29 is now "reserved" for experimental/development line disciplines - lots of other tiny fixes and cleanups to serial drivers and bindings All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (104 commits) vt_ioctl: fix potential spectre v1 in VT_DISALLOCATE serial: 8250: fix XOFF/XON sending when DMA is used tty: serial: samsung: Add ARTPEC-8 support dt-bindings: serial: samsung: Add ARTPEC-8 UART serial: sc16is7xx: Clear RS485 bits in the shutdown tty: serial: samsung: simplify getting OF match data tty: serial: samsung: constify variables and pointers tty: serial: samsung: constify s3c24xx_serial_drv_data members tty: serial: samsung: constify UART name tty: serial: samsung: constify s3c24xx_serial_drv_data tty: serial: samsung: reduce number of casts tty: serial: samsung: embed s3c2410_uartcfg in parent structure tty: serial: samsung: embed s3c24xx_uart_info in parent structure serial: 8250_tegra: mark acpi_device_id as unused with !ACPI tty: serial: bcm63xx: use more precise Kconfig symbol serial: SERIAL_SUNPLUS should depend on ARCH_SUNPLUS tty: serial: jsm: fix two assignments in if conditions tty: serial: jsm: remove redundant assignments to variable linestatus serial: 8250_mtk: make two read-only arrays static const serial: samsung_tty: do not unlock port->lock for uart_write_wakeup() ...
2022-03-28Merge tag 'staging-5.18-rc1' of ↵Linus Torvalds1-0/+37
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here is the big set of staging driver updates for 5.18-rc1. Loads of tiny cleanups for almost all staging drivers in here, nothing major at all. Highlights include: - remove the ashmem Android driver. It is long-dead and if there are any legacy userspace applications still using it, the Android kernel images will maintain it, the community shouldn't care about it anymore - wfx wifi driver major cleanups. Should be ready to merge out of staging soon, and will coordinate with the wifi maintainers after -rc1 is out - major cleanups and unwinding of the layers of the r8188eu driver. It's amazing just how many unneeded layers of abstraction is in there, just when we think it's done, another is found... - lots of tiny coding style cleanups in many other staging drivers. All have been in linux-next for a while with no reported problems" * tag 'staging-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (455 commits) staging: r8188eu: remove unnecessary memset in r8188eu staging: greybus: introduce pwm_ops::apply staging: rts5208: Resolve checkpatch.pl issues. staging: sm750fb: fix naming style staging: fbtft: Consider type of init sequence values in fbtft_init_display() staging: fbtft: Constify buf parameter in fbtft_dbg_hex() staging: mmal-vchiq: clear redundant item named bulk_scratch mips: dts: ralink: add MT7621 SoC staging: r8188eu: remove some unused local ieee80211 macros staging: r8188eu: make rtl8188e_process_phy_info static staging: r8188eu: remove unused function prototype staging: r8188eu: remove three unused receive defines staging: r8188eu: remove unnecessary initializations staging: rtl8192e: Fix spelling mistake "RESQUEST" -> "REQUEST" MAINTAINERS: remove the obsolete file entry for staging in ANDROID DRIVERS staging: r8188eu: proper error handling in rtw_init_drv_sw staging: r8188eu: call _cancel_timer_ex from _rtw_free_recv_priv staging: vt6656: Removed unused variable vt3342_vnt_threshold staging: vt6656: Removed unused variable bb_vga_0 staging: remove ashmem ...
2022-03-28Merge tag 'driver-core-5.18-rc1' of ↵Linus Torvalds3-27/+17
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core changes for 5.18-rc1. Not much here, primarily it was a bunch of cleanups and small updates: - kobj_type cleanups for default_groups - documentation updates - firmware loader minor changes - component common helper added and take advantage of it in many drivers (the largest part of this pull request). All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits) Documentation: update stable review cycle documentation drivers/base/dd.c : Remove the initial value of the global variable Documentation: update stable tree link Documentation: add link to stable release candidate tree devres: fix typos in comments Documentation: add note block surrounding security patch note samples/kobject: Use sysfs_emit instead of sprintf base: soc: Make soc_device_match() simpler and easier to read driver core: dd: fix return value of __setup handler driver core: Refactor sysfs and drv/bus remove hooks driver core: Refactor multiple copies of device cleanup scripts: get_abi.pl: Fix typo in help message kernfs: fix typos in comments kernfs: remove unneeded #if 0 guard ALSA: hda/realtek: Make use of the helper component_compare_dev_name video: omapfb: dss: Make use of the helper component_compare_dev power: supply: ab8500: Make use of the helper component_compare_dev ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of iommu/mediatek: Make use of the helper component_compare/release_of drm: of: Make use of the helper component_release_of ...
2022-03-28Merge tag 'char-misc-5.18-rc1' of ↵Linus Torvalds24-133/+712
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits) firmware: google: Properly state IOMEM dependency kgdbts: fix return value of __setup handler firmware: sysfb: fix platform-device leak in error path firmware: stratix10-svc: add missing callback parameter on RSU arm64: dts: qcom: add non-secure domain property to fastrpc nodes misc: fastrpc: Add dma handle implementation misc: fastrpc: Add fdlist implementation misc: fastrpc: Add helper function to get list and page misc: fastrpc: Add support to secure memory map dt-bindings: misc: add fastrpc domain vmid property misc: fastrpc: check before loading process to the DSP misc: fastrpc: add secure domain support dt-bindings: misc: add property to support non-secure DSP misc: fastrpc: Add support to get DSP capabilities misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP misc: fastrpc: separate fastrpc device from channel context dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells dt-bindings: nvmem: make "reg" property optional nvmem: brcm_nvram: parse NVRAM content into NVMEM cells nvmem: dt-bindings: Fix the error of dt-bindings check ...
2022-03-28Merge tag 'pinctrl-v5.18-1' of ↵Linus Torvalds4-0/+1483
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "No core changes this time. Just new driver code and improvements! New drivers: - New driver for the Broadcom BCM4908 SoC. - New subdriver for Tesla FSD (Full Self Driving) SoC, a derivative of the Samsung Exynos pin control driver. - New driver for the Amlogic Meson S4 SoC. - New driver for the Sunplus SP7021 SoC. - New driver for the Microsemi Ocelot family ServalT SoC. - New subdriver for Intel Alder Lake-M SoC. - New subdriver for Intel Ice Lake-N SoC, including PCH support. - New subdriver for Renesas R8A779F0 SoC. - New subdriver for Mediatek MT8186 SoC. - New subdriver for NXP Freescale i.MX93 SoC. - New driver for Nuvoton WPCM450 SoC. - New driver for Qualcomm SC8280XP SoC. Improvements: - Wakeup support on Samsung Exynos850 and ExynosAutov9. - Serious and voluminous maintenance cleanup and refactoring in the Renesas drivers. Mainly sharing similar data between the different SoC subdrivers. - Qualcomm SM8450 EGPIO support. - Drive strength support on the Mediatek MT8195. - Add some missing groups and functions to the Ralink RT2880" * tag 'pinctrl-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (188 commits) pinctrl: mediatek: common-v1: fix semicolon.cocci warnings pinctrl: nuvoton: wpcm450: Fix build error without OF pinctrl: qcom-pmic-gpio: Add support for pm8450 dt-bindings: pinctrl: aspeed: Update gfx node in example dt-bindings: pinctrl: rt2880: add missing pin groups and functions pinctrl: ingenic: Fix regmap on X series SoCs pinctrl: nuvoton: Fix return value check in wpcm450_gpio_register() pinctrl: nuvoton: wpcm450: off by one in wpcm450_gpio_register() pinctrl: nuvoton: wpcm450: select GENERIC_PINCTRL_GROUPS pinctrl: nuvoton: Fix sparse warning pinctrl: mediatek: mt8186: Account for probe refactoring pinctrl: mediatek: common-v1: Commonize spec_ies_smt_set callback pinctrl: mediatek: common-v1: Commonize spec_pupd callback pinctrl: mediatek: common-v1: Use common probe function pinctrl: mediatek: common-v1: Add common probe function pinctrl: mediatek: paris: Unify probe function by using OF match data pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe pinctrl: berlin: fix error return code of berlin_pinctrl_build_state() pinctrl: qcom: Introduce sc8280xp TLMM driver ...
2022-03-28Reinstate some of "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""Linus Torvalds1-8/+0
Halil Pasic points out [1] that the full revert of that commit (revert in bddac7c1e02b), and that a partial revert that only reverts the problematic case, but still keeps some of the cleanups is probably better.  And that partial revert [2] had already been verified by Oleksandr Natalenko to also fix the issue, I had just missed that in the long discussion. So let's reinstate the cleanups from commit aa6f8dcbab47 ("swiotlb: rework "fix info leak with DMA_FROM_DEVICE""), and effectively only revert the part that caused problems. Link: https://lore.kernel.org/all/20220328013731.017ae3e3.pasic@linux.ibm.com/ [1] Link: https://lore.kernel.org/all/20220324055732.GB12078@lst.de/ [2] Link: https://lore.kernel.org/all/4386660.LvFx2qVVIh@natalenko.name/ [3] Suggested-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Christoph Hellwig" <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller1-1/+1
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Incorrect output device in nf_egress hook, from Phill Sutter. 2) Preserve liberal flag in TCP conntrack state, reported by Sven Auhagen. 3) Use GFP_KERNEL_ACCOUNT flag for nf_tables objects, from Vasily Averin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-28Merge tag 'mailbox-v5.18' of ↵Linus Torvalds1-1/+7
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: "qcom: - add support for MSM8976 mtk: - enable mt8186 - add ADSP controller driver ti: - use poll mode during suspend tegra: - fix tx channel flush imx: - add i.MX8 SECO MU support - prepare for, and add iMX93 support" * tag 'mailbox-v5.18' of git://git.linaro.org/landing-teams/working/fujitsu/integration: dt-bindings: mailbox: add definition for mt8186 mailbox: ti-msgmgr: Operate mailbox in polled mode during system suspend mailbox: ti-msgmgr: Refactor message read during interrupt handler mailbox: imx: support i.MX93 S401 MU mailbox: imx: support dual interrupts mailbox: imx: extend irq to an array dt-bindings: mailbox: imx-mu: add i.MX93 S4 MU support dt-bindings: mailbox: imx-mu: add i.MX93 MU mailbox: imx: add i.MX8 SECO MU support mailbox: imx: introduce rxdb callback dt-bindings: mailbox: imx-mu: add i.MX8 SECO MU support mailbox: imx: enlarge timeout while reading/writing messages to SCFW mailbox: imx: fix crash in resume on i.mx8ulp mailbox: imx: fix wakeup failure from freeze mode mailbox: mediatek: add support for adsp mailbox controller dt-bindings: mailbox: mtk,adsp-mbox: add mtk adsp-mbox document mailbox: qcom-apcs-ipc: Add compatible for MSM8976 SoC dt-bindings: mailbox: Add compatible for the MSM8976 mailbox: tegra-hsp: Flush whole channel
2022-03-27Merge tag 'x86_core_for_5.18_rc1' of ↵Linus Torvalds7-11/+50
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 CET-IBT (Control-Flow-Integrity) support from Peter Zijlstra: "Add support for Intel CET-IBT, available since Tigerlake (11th gen), which is a coarse grained, hardware based, forward edge Control-Flow-Integrity mechanism where any indirect CALL/JMP must target an ENDBR instruction or suffer #CP. Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation is limited to 2 instructions (and typically fewer) on branch targets not starting with ENDBR. CET-IBT also limits speculation of the next sequential instruction after the indirect CALL/JMP [1]. CET-IBT is fundamentally incompatible with retpolines, but provides, as described above, speculation limits itself" [1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html * tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) kvm/emulate: Fix SETcc emulation for ENDBR x86/Kconfig: Only allow CONFIG_X86_KERNEL_IBT with ld.lld >= 14.0.0 x86/Kconfig: Only enable CONFIG_CC_HAS_IBT for clang >= 14.0.0 kbuild: Fixup the IBT kbuild changes x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy x86: Remove toolchain check for X32 ABI capability x86/alternative: Use .ibt_endbr_seal to seal indirect calls objtool: Find unused ENDBR instructions objtool: Validate IBT assumptions objtool: Add IBT/ENDBR decoding objtool: Read the NOENDBR annotation x86: Annotate idtentry_df() x86,objtool: Move the ASM_REACHABLE annotation to objtool.h x86: Annotate call_on_stack() objtool: Rework ASM_REACHABLE x86: Mark __invalid_creds() __noreturn exit: Mark do_group_exit() __noreturn x86: Mark stop_this_cpu() __noreturn objtool: Ignore extra-symbol code objtool: Rename --duplicate to --lto ...
2022-03-26Merge tag 'usb-5.18-rc1' of ↵Linus Torvalds2-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 5.18-rc1. Nothing major in here, just lots of little improvements and cleanups and new device support. Highlights are: - list iterator fixups for when we walk past the end of the list (a common problem that was cut/pasted in almost all USB gadget drivers) - xen USB driver "hardening" for malicious hosts - xhci driver updates and fixes for more hardware types - xhci debug cable fixes to make it actually work again - usb gadget audio driver improvements - usb gadget storage fixes to work with OS-X - lots of other small usb gadget fixes and updates - USB DWC3 driver improvements for more hardware types - Lots of other small USB driver improvements - DTS updates for some USB platforms All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits) usb: gadget: fsl_qe_udc: Add missing semicolon in qe_ep_dequeue() dt-bindings: usb: mtk-xhci: add compatible for mt8186 usb: dwc3: Issue core soft reset before enabling run/stop usb: gadget: Makefile: remove ccflags-y USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c usb: gadget: eliminate anonymous module_init & module_exit usb: usbip: eliminate anonymous module_init & module_exit xen/usb: harden xen_hcd against malicious backends usb: dwc3: gadget: Wait for ep0 xfers to complete during dequeue usb: dwc3: gadget: move cmd_endtransfer to extra function usb: dwc3: gadget: ep_queue simplify isoc start condition xen/usb: don't use arbitrary_virt_to_machine() usb: isp1760: remove redundant max_packet() macro usb: oxu210hp-hcd: remove redundant call to max_packet() macro usb: common: usb-conn-gpio: Make VBUS supply completely optional USB: storage: ums-realtek: fix error code in rts51x_read_mem() usb: early: xhci-dbc: Fix xdbc number parsing usb: early: xhci-dbc: Remove duplicate keep parsing x86/tsc: Be consistent about use_tsc_delay() usb: gadget: udc: s3c2410: remove usage of list iterator past the loop body ...
2022-03-26Merge branch 'i2c/for-mergewindow' of ↵Linus Torvalds5-14/+72
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - tracepoints when Linux acts as an I2C client - added support for AMD PSP - whole subsystem now uses generic_handle_irq_safe() - piix4 driver gained MMIO access enabling so far missed controllers with AMD chipsets - a bulk of device driver updates, refactorization, and fixes. * 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (61 commits) i2c: mux: demux-pinctrl: do not deactivate a master that is not active i2c: meson: Fix wrong speed use from probe i2c: add tracepoints for I2C slave events i2c: designware: Remove code duplication i2c: cros-ec-tunnel: Fix syntax errors in comments MAINTAINERS: adjust XLP9XX I2C DRIVER after removing the devicetree binding i2c: designware: Mark dw_i2c_plat_{suspend,resume}() as __maybe_unused i2c: mediatek: Add i2c compatible for Mediatek MT8168 dt-bindings: i2c: update bindings for MT8168 SoC i2c: mt65xx: Simplify with clk-bulk i2c: i801: Drop two outdated comments i2c: xiic: Make bus names unique i2c: i801: Add support for the Process Call command i2c: i801: Drop useless masking in i801_access i2c: tegra: Add SMBus block read function i2c: designware: Use the i2c_mark_adapter_suspended/resumed() helpers i2c: designware: Lock the adapter while setting the suspended flag i2c: mediatek: remove redundant null check i2c: mediatek: modify bus speed calculation formula i2c: designware: Fix improper usage of readl ...
2022-03-26Merge tag 'memcpy-v5.18-rc1' of ↵Linus Torvalds2-50/+227
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull FORTIFY_SOURCE updates from Kees Cook: "This series consists of two halves: - strict compile-time buffer size checking under FORTIFY_SOURCE for the memcpy()-family of functions (for extensive details and rationale, see the first commit) - enabling FORTIFY_SOURCE for Clang, which has had many overlapping bugs that we've finally worked past" * tag 'memcpy-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: fortify: Add Clang support fortify: Make sure strlen() may still be used as a constant expression fortify: Use __diagnose_as() for better diagnostic coverage fortify: Make pointer arguments const Compiler Attributes: Add __diagnose_as for Clang Compiler Attributes: Add __overloadable for Clang Compiler Attributes: Add __pass_object_size for Clang fortify: Replace open-coded __gnu_inline attribute fortify: Update compile-time tests for Clang 14 fortify: Detect struct member overflows in memset() at compile-time fortify: Detect struct member overflows in memmove() at compile-time fortify: Detect struct member overflows in memcpy() at compile-time
2022-03-26Merge tag 'for-5.18/64bit-pi-2022-03-25' of git://git.kernel.dk/linux-blockLinus Torvalds6-6/+110
Pull block layer 64-bit data integrity support from Jens Axboe: "This adds support for 64-bit data integrity in the block layer and in NVMe" * tag 'for-5.18/64bit-pi-2022-03-25' of git://git.kernel.dk/linux-block: crypto: fix crc64 testmgr digest byte order nvme: add support for enhanced metadata block: add pi for extended integrity crypto: add rocksoft 64b crc guard tag framework lib: add rocksoft model crc64 linux/kernel: introduce lower_48_bits function asm-generic: introduce be48 unaligned accessors nvme: allow integrity on extended metadata formats block: support pi with extended metadata
2022-03-26Merge tag 'for-5.18/write-streams-2022-03-18' of git://git.kernel.dk/linux-blockLinus Torvalds4-27/+1
Pull NVMe write streams removal from Jens Axboe: "This removes the write streams support in NVMe. No vendor ever really shipped working support for this, and they are not interested in supporting it. With the NVMe support gone, we have nothing in the tree that supports this. Remove passing around of the hints. The only discussion point in this patchset imho is the fact that the file specific write hint setting/getting fcntl helpers will now return -1/EINVAL like they did before we supported write hints. No known applications use these functions, I only know of one prototype that I help do for RocksDB, and that's not used. That said, with a change like this, it's always a bit controversial. Alternatively, we could just make them return 0 and pretend it worked. It's placement based hints after all" * tag 'for-5.18/write-streams-2022-03-18' of git://git.kernel.dk/linux-block: fs: remove fs.f_write_hint fs: remove kiocb.ki_hint block: remove the per-bio/request write hint nvme: remove support or stream based temperature hint
2022-03-26Merge tag 'devicetree-for-5.18' of ↵Linus Torvalds10-24/+13
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Add Krzysztof Kozlowski as co-maintainer for DT bindings providing much needed help. - DT schema validation now takes DTB files as input rather than intermediate YAML files. This decouples the validation from the source level syntax information. There's a bunch of schema fixes as a result of switching to DTB based validation which exposed some errors and incomplete schemas and examples. - Kbuild improvements to explicitly warn users running 'make dt_binding_check' on missing yamllint - Expand DT_SCHEMA_FILES kbuild variable to take just a partial filename or path instead of the full path to 1 file. - Convert various bindings to schema format: mscc,vsc7514-switch, multiple GNSS bindings, ahci-platform, i2c-at91, multiple UFS bindings, cortina,gemini-sata-bridge, cortina,gemini-ethernet, Atmel SHA, Atmel TDES, Atmel AES, armv7m-systick, Samsung Exynos display subsystem, nuvoton,npcm7xx-timer, samsung,s3c2410-i2c, zynqmp_dma, msm/mdp4, rda,8810pl-uart - New schemas for u-boot environment variable partition, TI clksel - New compatible strings for Renesas RZ/V2L SoC - Vendor prefixes for Xen, HPE, deprecated Synopsys, deprecated HiSilicon - Add/fix schemas for QEMU Arm 'virt' machine - Drop unused of_alias_get_alias_list() function - Add a script to check DT unittest EXPECT message output. Pass messages also now print by default at PR_INFO level to help test automation. * tag 'devicetree-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (96 commits) dt-bindings: kbuild: Make DT_SCHEMA_LINT a recursive variable dt-bindings: nvmem: add U-Boot environment variables binding dt-bindings: ufs: qcom: Add SM6350 compatible string dt-bindings: dmaengine: sifive,fu540-c000: include generic schema dt-bindings: gpio: pca95xx: drop useless consumer example Revert "of: base: Introduce of_alias_get_alias_list() to check alias IDs" dt-bindings: virtio,mmio: Allow setting devices 'dma-coherent' dt-bindings: gnss: Add two more chips dt-bindings: gnss: Rewrite sirfstar binding in YAML dt-bindings: gnss: Modify u-blox to use common bindings dt-bindings: gnss: Rewrite common bindings in YAML dt-bindings: ata: ahci-platform: Add rk3568-dwc-ahci compatible dt-bindings: ata: ahci-platform: Add power-domains property dt-bindings: ata: ahci-platform: Convert DT bindings to yaml dt-bindings: kbuild: Use DTB files for validation dt-bindings: kbuild: Pass DT_SCHEMA_FILES to dt-validate dt-bindings: Add QEMU virt machine compatible dt-bindings: arm: Convert QEMU fw-cfg to DT schema dt-bindings: i2c: at91: Add SAMA7G5 compatible strings list dt-bindings: i2c: convert i2c-at91 to json-schema ...
2022-03-26Revert "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""Linus Torvalds1-0/+8
This reverts commit aa6f8dcbab473f3a3c7454b74caa46d36cdc5d13. It turns out this breaks at least the ath9k wireless driver, and possibly others. What the ath9k driver does on packet receive is to set up the DMA transfer with: int ath_rx_init(..) .. bf->bf_buf_addr = dma_map_single(sc->dev, skb->data, common->rx_bufsize, DMA_FROM_DEVICE); and then the receive logic (through ath_rx_tasklet()) will fetch incoming packets static bool ath_edma_get_buffers(..) .. dma_sync_single_for_cpu(sc->dev, bf->bf_buf_addr, common->rx_bufsize, DMA_FROM_DEVICE); ret = ath9k_hw_process_rxdesc_edma(ah, rs, skb->data); if (ret == -EINPROGRESS) { /*let device gain the buffer again*/ dma_sync_single_for_device(sc->dev, bf->bf_buf_addr, common->rx_bufsize, DMA_FROM_DEVICE); return false; } and it's worth noting how that first DMA sync: dma_sync_single_for_cpu(..DMA_FROM_DEVICE); is there to make sure the CPU can read the DMA buffer (possibly by copying it from the bounce buffer area, or by doing some cache flush). The iommu correctly turns that into a "copy from bounce bufer" so that the driver can look at the state of the packets. In the meantime, the device may continue to write to the DMA buffer, but we at least have a snapshot of the state due to that first DMA sync. But that _second_ DMA sync: dma_sync_single_for_device(..DMA_FROM_DEVICE); is telling the DMA mapping that the CPU wasn't interested in the area because the packet wasn't there. In the case of a DMA bounce buffer, that is a no-op. Note how it's not a sync for the CPU (the "for_device()" part), and it's not a sync for data written by the CPU (the "DMA_FROM_DEVICE" part). Or rather, it _should_ be a no-op. That's what commit aa6f8dcbab47 broke: it made the code bounce the buffer unconditionally, and changed the DMA_FROM_DEVICE to just unconditionally and illogically be DMA_TO_DEVICE. [ Side note: purely within the confines of the swiotlb driver it wasn't entirely illogical: The reason it did that odd DMA_FROM_DEVICE -> DMA_TO_DEVICE conversion thing is because inside the swiotlb driver, it uses just a swiotlb_bounce() helper that doesn't care about the whole distinction of who the sync is for - only which direction to bounce. So it took the "sync for device" to mean that the CPU must have been the one writing, and thought it meant DMA_TO_DEVICE. ] Also note how the commentary in that commit was wrong, probably due to that whole confusion, claiming that the commit makes the swiotlb code "bounce unconditionally (that is, also when dir == DMA_TO_DEVICE) in order do avoid synchronising back stale data from the swiotlb buffer" which is nonsensical for two reasons: - that "also when dir == DMA_TO_DEVICE" is nonsensical, as that was exactly when it always did - and should do - the bounce. - since this is a sync for the device (not for the CPU), we're clearly fundamentally not coping back stale data from the bounce buffers at all, because we'd be copying *to* the bounce buffers. So that commit was just very confused. It confused the direction of the synchronization (to the device, not the cpu) with the direction of the DMA (from the device). Reported-and-bisected-by: Oleksandr Natalenko <oleksandr@natalenko.name> Reported-by: Olha Cherevyk <olha.cherevyk@gmail.com> Cc: Halil Pasic <pasic@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Kalle Valo <kvalo@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Toke Høiland-Jørgensen <toke@toke.dk> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-26Merge tag 'fsnotify_for_v5.18-rc1' of ↵Linus Torvalds1-0/+19
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fsnotify updates from Jan Kara: "A few fsnotify improvements and cleanups" * tag 'fsnotify_for_v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fsnotify: remove redundant parameter judgment fsnotify: optimize FS_MODIFY events with no ignored masks fsnotify: fix merge with parent's ignored mask
2022-03-25Merge tag 'mfd-next-5.18' of ↵Linus Torvalds8-24/+112
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for Maxim MAX77714 PMIC Removed Drivers: - Remove support for ST-Ericsson AB8500 DebugFS New Device Support: - Add support for Silergy SY7636A to Simple MFD I2C - Add support for MediaTek MT6366 PMIC to MT6358 IRQ - Add support for Charger to Intel PMIC CRC - Add support for Raptor Lake to Intel LPSS PCI New Functionality: - Add support for Reboot to Rockchip RK808 Fix-ups: - Device Tree changes (includcing YAML conversion) for silergy,sy7636a, maxim,max77843, google,cros-ec, maxim,max14577, maxim,max77802, maxim,max77714, qcom,tcsr, qcom,spmi-pmic, stericsson,ab8500, stericsson,db8500-prcmu, samsung,exynos5433-lpass, mt6397, syscon, brcm,cru - Visible to menuconfig; simple-mfd-i2c - Clean-up or clarify code; max77686, intel_soc_pmic_crc - Improve error handling; mc13xxx-core, stmfx, asic3 - Pass device information to child devices; iqs62x, intel-lpss-acpi - Individually identify IRQ domains; intel_soc_pmic_core - Remove superfluous code; dbx500-prcmu, exynos-lpass - Staticify and constify; arizona-i2c - Mark sometimes used data as __maybe_unused; atmel-flexcom - Account for different ACPI tables on AOSP/Windows platforms; arizona-spi - Use provided (platform) APIs; ab8500-core - Trivial (whitespace, spelling); rohm-bd9576" * tag 'mfd-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (50 commits) dt-bindings: mfd: syscon: Add microchip,lan966x-cpu-syscon compatible mfd: bd9576: fix typos in comments mfd: Use platform_get_irq() to get the interrupt mfd: db8500-prcmu: Remove unused inline function mfd: arizona-spi: Add Android board ACPI table handling mfd: arizona-spi: Split Windows ACPI init code into its own function mfd: asic3: Add missing iounmap() on error asic3_mfd_probe MAINTAINERS: Rectify entry for ROHM MULTIFUNCTION BD9571MWV-M PMIC DEVICE DRIVERS mfd: intel-lpss: Provide an SSP type to the driver dt-bindings: mfd: brcm,cru: Rename pinctrl node dt-bindings: Add compatibles for undocumented trivial syscons mfd: atmel-flexcom: Fix compilation warning dt-bindings: mfd: Add compatible for the MediaTek MT6366 PMIC dt-bindings: mfd: samsung,exynos5433-lpass: Convert to dtschema mfd: exynos-lpass: Drop unneeded syscon.h include mfd: intel-lpss: Add Intel Raptor Lake PCH-S PCI IDs mfd: ab8500: Drop debugfs module mfd: sta2x11: Use GFP_KERNEL instead of GFP_ATOMIC mfd: ab8500: Rewrite bindings in YAML mfd: qcom-spmi-pmic: Add pm8953 compatible ...
2022-03-25Merge tag 'mtd/changes-for-5.18' of ↵Linus Torvalds10-34/+143
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "There has been a lot of activity in the MTD subsystem recently, with a number of SPI-NOR cleanups as well as the introduction of ECC engines that can be used by SPI controllers (hence a few SPI patches in here). Core MTD changes: - Replace the expert mode symbols with a single helper - Fix misuses of of_match_ptr() - Remove partid and partname debugfs files - tests: Fix eraseblock read speed miscalculation for lower partition sizes - TRX parser: Allow to use on MediaTek MIPS SoCs MTD driver changes: - spear_smi: use GFP_KERNEL - mchp48l640: Add SPI ID table - mchp23k256: Add SPI ID table - blkdevs: Avoid soft lockups with some mtd/spi devices - aspeed-smc: Improve probe resilience Hyperbus changes: - HBMC_AM654 should depend on ARCH_K3 NAND core changes: - ECC: - Add infrastructure to support hardware engines - Add a new helper to retrieve the ECC context - Provide a helper to retrieve a pilelined engine device NAND-ECC changes: - Macronix ECC engine: - Add Macronix external ECC engine support - Support SPI pipelined mode - Make two read-only arrays static const - Fix compile test issue Raw NAND core changes: - Fix misuses of of_match_node() - Rework of_get_nand_bus_width() - Remove of_get_nand_on_flash_bbt() wrapper - Protect access to rawnand devices while in suspend - bindings: Document the wp-gpios property Rax NAND controller driver changes: - atmel: Fix refcount issue in atmel_nand_controller_init - nandsim: - Add NS_PAGE_BYTE_SHIFT macro to replace the repeat pattern - Merge repeat codes in ns_switch_state - Replace overflow check with kzalloc to single kcalloc - rockchip: Fix platform_get_irq.cocci warning - stm32_fmc2: Add NAND Write Protect support - pl353: Set the nand chip node as the flash node - brcmnand: Fix sparse warnings in bcma_nand - omap_elm: Remove redundant variable 'errors' - gpmi: - Support fast edo timings for mx28 - Validate controller clock rate - Fix controller timings setting - brcmnand: - Add BCMA shim - BCMA controller uses command shift of 0 - Allow platform data instantation - Add platform data structure for BCMA - Allow working without interrupts - Move OF operations out of brcmnand_init_cs() - Avoid pdev in brcmnand_init_cs() - Allow SoC to provide I/O operations - Assign soc as early as possible Onenand changes: - Check for error irq SPI-NAND core changes: - Delay a little bit the dirmap creation - Create direct mapping descriptors for ECC operations SPI-NAND driver changes: - macronix: Use random program load SPI NOR core changes: - Move vendor specific code out of the core into vendor drivers. - Unify all function and object names in the vendor modules. - Make setup() callback optional to improve readability. - Skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash declaration. SPI changes: - Macronix SPI controller: - Fix the transmit path - Create a helper to configure the controller before an operation - Create a helper to ease the start of an operation - Add support for direct mapping - Add support for pipelined ECC operations - spi-mem: - Introduce a capability structure - Check the controller extra capabilities - cadence-quadspi/mxic: Provide capability structures - Kill the spi_mem_dtr_supports_op() helper - Add an ecc parameter to the spi_mem_op structure Binding changes: - Dropped mtd/cortina,gemini-flash.txt - Convert BCM47xx partitions to json-schema - Vendor prefixes: Clarify Macronix prefix - SPI NAND: Convert spi-nand description file to yaml - Raw NAND chip: Create a NAND chip description - Raw NAND controller: - Harmonize the property types - Fix a comment in the examples - Fix the reg property description - Describe Macronix NAND ECC engine - Macronix SPI controller: - Document the nand-ecc-engine property - Convert to yaml - The interrupt property is not mandatory" * tag 'mtd/changes-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (104 commits) mtd: nand: ecc: mxic: Fix compile test issue mtd: nand: mxic-ecc: make two read-only arrays static const mtd: hyperbus: HBMC_AM654 should depend on ARCH_K3 mtd: core: Remove partid and partname debugfs files dt-bindings: mtd: partitions: convert BCM47xx to the json-schema mtd: tests: Fix eraseblock read speed miscalculation for lower partition sizes mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init mtd: rawnand: rockchip: fix platform_get_irq.cocci warning mtd: spi-nor: Skip erase logic when SPI_NOR_NO_ERASE is set mtd: spi-nor: renumber flags mtd: spi-nor: slightly change code style in spi_nor_sr_ready() mtd: spi-nor: spansion: rename vendor specific functions and defines mtd: spi-nor: spansion: convert USE_CLSR to a manufacturer flag mtd: spi-nor: move all spansion specifics into spansion.c mtd: spi-nor: spansion: slightly rework control flow in late_init() mtd: spi-nor: micron-st: rename vendor specific functions and defines mtd: spi-nor: micron-st: convert USE_FSR to a manufacturer flag mtd: spi-nor: move all micron-st specifics into micron-st.c mtd: spi-nor: xilinx: correct the debug message mtd: spi-nor: xilinx: rename vendor specific functions and defines ...
2022-03-25Merge tag 'for-v5.18' of ↵Linus Torvalds4-4/+296
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - Introduce "Bypass" charging type used by USB PPS standard - Refactor power_supply_set_input_current_limit_from_supplier() - Add fwnode support to power_supply_get_battery_info() Drivers: - ab8500: continue migrating towards using standard core APIs - axp288 fuel-gauge: refactor driver to be fully resource managed - battery-samsung-sdi: new in-kernel provider for (constant) Samsung battery info - bq24190: disable boost regulator on shutdown - bq24190: add support for battery-info on ACPI based systems - bq25890: prepare driver for usage on ACPI based systems - bq25890: add boost regulator support - cpcap-battery: add NVMEM based battery detection support - injoinic ip5xxx: new driver for power bank IC - upi ug3105: new battery driver - misc small improvements and fixes" * tag 'for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (94 commits) power: ab8500_chargalg: Use CLOCK_MONOTONIC power: supply: Add a driver for Injoinic power bank ICs dt-bindings: trivial-devices: Add Injoinic power bank ICs dt-bindings: vendor-prefixes: Add Injoinic power: supply: ab8500: Remove unused variable power: supply: da9150-fg: Remove unnecessary print function dev_err() power: supply: ab8500: fix a handful of spelling mistakes power: supply: ab8500_fg: Account for line impedance dt-bindings: power: supply: ab8500_fg: Add line impedance power: supply: axp20x_usb_power: fix platform_get_irq.cocci warnings power: supply: axp20x_ac_power: fix platform_get_irq.cocci warning power: supply: wm8350-power: Add missing free in free_charger_irq power: supply: wm8350-power: Handle error for wm8350_register_irq power: supply: Static data for Samsung batteries power: supply: ab8500_fg: Use VBAT-to-Ri if possible power: supply: Support VBAT-to-Ri lookup tables power: supply: ab8500: Standardize BTI resistance power: supply: ab8500: Standardize alert mode charging power: supply: ab8500: Standardize maintenance charging power: supply: bq24190_charger: Delay applying charge_type changes when OTG 5V Vbus boost is on ...
2022-03-25Merge tag 'pci-v5.18-changes' of ↵Linus Torvalds3-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Move the VGA arbiter from drivers/gpu to drivers/pci because it's PCI-specific, not GPU-specific (Bjorn Helgaas) - Select the default VGA device consistently whether it's enumerated before or after VGA arbiter init, which fixes arches that enumerate PCI devices late (Huacai Chen) Resource management: - Support BAR sizes up to 8TB (Dongdong Liu) PCIe native device hotplug: - Fix "Command Completed" tracking to avoid spurious timouts when powering off empty slots (Liguang Zhang) - Quirk Qualcomm devices that don't implement Command Completed correctly, again to avoid spurious timeouts (Manivannan Sadhasivam) Peer-to-peer DMA: - Add Intel 3rd Gen Intel Xeon Scalable Processors to whitelist (Michael J. Ruhl) APM X-Gene PCIe controller driver: - Revert generic DT parsing changes that broke some machines in the field (Marc Zyngier) Freescale i.MX6 PCIe controller driver: - Allow controller probe to succeed even when no devices currently present to allow hot-add later (Fabio Estevam) - Enable power management on i.MX6QP (Richard Zhu) - Assert CLKREQ# on i.MX8MM so enumeration doesn't hang when no device is connected (Richard Zhu) Marvell Aardvark PCIe controller driver: - Fix MSI and MSI-X support (Marek Behún, Pali Rohár) - Add support for ERR and PME interrupts (Pali Rohár) Marvell MVEBU PCIe controller driver: - Add DT binding and support for "num-lanes" (Pali Rohár) - Add support for INTx interrupts (Pali Rohár) Microsoft Hyper-V host bridge driver: - Avoid unnecessary hypercalls when unmasking IRQs on ARM64 (Boqun Feng) Qualcomm PCIe controller driver: - Add SM8450 DT binding and driver support (Dmitry Baryshkov) Renesas R-Car PCIe controller driver: - Help the controller get to the L1 state since the hardware can't do it on its own (Marek Vasut) - Return PCI_ERROR_RESPONSE (~0) for reads that fail on PCIe (Marek Vasut) SiFive FU740 PCIe controller driver: - Drop redundant '-gpios' from DT GPIO lookup (Ben Dooks) - Force 2.5GT/s for initial device probe (Ben Dooks) Socionext UniPhier Pro5 controller driver: - Add NX1 DT binding and driver support (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Restore MSI configuration so MSI works after resume (Jisheng Zhang)" * tag 'pci-v5.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits) x86/PCI: Add #includes to asm/pci_x86.h PCI: ibmphp: Remove unused assignments PCI: cpqphp: Remove unused assignments PCI: fu740: Remove unused assignments PCI: kirin: Remove unused assignments PCI: Remove unused assignments PCI: Declare pci_filp_private only when HAVE_PCI_MMAP PCI: Avoid broken MSI on SB600 USB devices PCI: fu740: Force 2.5GT/s for initial device probe PCI: xgene: Revert "PCI: xgene: Fix IB window setup" PCI: xgene: Revert "PCI: xgene: Use inbound resources for setup" PCI: imx6: Assert i.MX8MM CLKREQ# even if no device present PCI: imx6: Invoke the PHY exit function after PHY power off PCI: rcar: Use PCI_SET_ERROR_RESPONSE after read which triggered an exception PCI: rcar: Finish transition to L1 state in rcar_pcie_config_access() PCI: dwc: Restore MSI Receiver mask during resume PCI: fu740: Drop redundant '-gpios' from DT GPIO lookup PCI/VGA: Replace full MIT license text with SPDX identifier PCI/VGA: Use unsigned format string to print lock counts PCI/VGA: Log bridge control messages when adding devices ...
2022-03-25Merge tag 'gpio-updates-for-v5.18' of ↵Linus Torvalds1-19/+16
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "Relatively few updates for this release cycle. We have a single new driver and some minor changes in drivers, more work on limiting the usage of of_node in drivers and DT updates: - new driver: gpio-en7523 - dt-bindings: convertion of faraday,ftgpio010 to YAML, new compatible string in gpio-vf610 and a bugfix in an example - gpiolib core: several improvements and some code shrink - documentation: convert all public docs into kerneldoc format - set IRQ bus token in gpio-crystalcove (addresses a debugfs issue) - add a missing return value check for kstrdup() in gpio-merrifield - allow gpio-tps68470 to be built as module - more work on limiting usage of of_node in GPIO drivers - several sysfs interface improvements - use SDPX in gpio-ts4900" * tag 'gpio-updates-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: ts4900: Use SPDX header gpiolib: Use list_first_entry()/list_last_entry() gpiolib: sysfs: Simplify edge handling in the code gpiolib: sysfs: Move kstrtox() calls outside of the mutex lock gpiolib: sysfs: Move sysfs_emit() calls outside of the mutex lock gpiolib: make struct comments into real kernel docs dt-bindings: gpio: convert faraday,ftgpio01 to yaml dt-bindings: gpio: gpio-vf610: Add imx93 compatible string gpiolib: Simplify error path in gpiod_get_index() when requesting GPIO gpiolib: Use short form of ternary operator in gpiod_get_index() gpiolib: Introduce for_each_gpio_desc_with_flag() macro gpio: Add support for Airoha EN7523 GPIO controller dt-bindings: arm: airoha: Add binding for Airoha GPIO controller dt-bindings: gpio: fix gpio-hog example gpio: tps68470: Allow building as module gpio: tegra: Get rid of duplicate of_node assignment gpio: altera-a10sr: Switch to use fwnode instead of of_node gpio: merrifield: check the return value of devm_kstrdup() gpio: crystalcove: Set IRQ domain bus token to DOMAIN_BUS_WIRED
2022-03-25Merge branch 'for-linus' of ↵Linus Torvalds1-2/+21
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - rework of generic input handling which ultimately makes the processing of tablet events more generic and reliable (Benjamin Tissoires) - fixes for handling unnumbered reports fully correctly in i2c-hid (Angela Czubak, Dmitry Torokhov) - untangling of intermingled code for sending and handling output reports in i2c-hid (Dmitry Torokhov) - Apple magic keyboard support improvements for newer models (José Expósito) - Apple T2 Macs support improvements (Aun-Ali Zaidi, Paul Pawlowski) - driver for Razer Blackwidow keyboards (Jelle van der Waa) - driver for SiGma Micro keyboards (Desmond Lim) - integration of first part of DIGImend patches in order to ultimately vastly improve Linux support of tablets (Nikolai Kondrashov, José Expósito) * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (55 commits) HID: intel-ish-hid: Use dma_alloc_coherent for firmware update Input: docs: add more details on the use of BTN_TOOL HID: input: accommodate priorities for slotted devices HID: input: remove the need for HID_QUIRK_INVERT HID: input: enforce Invert usage to be processed before InRange HID: core: for input reports, process the usages by priority list HID: compute an ordered list of input fields to process HID: input: move up out-of-range processing of input values HID: input: rework spaghetti code with switch statements HID: input: tag touchscreens as such if the physical is not there HID: core: split data fetching from processing in hid_input_field() HID: core: de-duplicate some code in hid_input_field() HID: core: statically allocate read buffers HID: uclogic: Support multiple frame input devices HID: uclogic: Define report IDs before their descriptors HID: uclogic: Put version first in rdesc namespace HID: uclogic: Use "frame" instead of "buttonpad" HID: uclogic: Use different constants for frame report IDs HID: uclogic: Specify total report size to buttonpad macro HID: uclogic: Switch to matching subreport bytes ...
2022-03-25Merge tag 'platform-drivers-x86-v5.18-1' of ↵Linus Torvalds1-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: "New drivers: - AMD Host System Management Port (HSMP) - Intel Software Defined Silicon Removed drivers (functionality folded into other drivers): - intel_cht_int33fe_microb - surface3_button amd-pmc: - s2idle bug-fixes - Support for AMD Spill to DRAM STB feature hp-wmi: - Fix SW_TABLET_MODE detection method (and other fixes) - Support omen thermal profile policy v1 serial-multi-instantiate: - Add SPI device support - Add support for CS35L41 amplifiers used in new laptops think-lmi: - syfs-class-firmware-attributes Certificate authentication support thinkpad_acpi: - Fixes + quirks - Add platform_profile support on AMD based ThinkPads x86-android-tablets: - Improve Asus ME176C / TF103C support - Support Nextbook Ares 8, Lenovo Tab 2 830 and 1050 tablets Lots of various other small fixes and hardware-id additions" * tag 'platform-drivers-x86-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (60 commits) platform/x86: think-lmi: Certificate authentication support Documentation: syfs-class-firmware-attributes: Lenovo Certificate support platform/x86: amd-pmc: Only report STB errors when STB enabled platform/x86: amd-pmc: Drop CPU QoS workaround platform/x86: amd-pmc: Output error codes in messages platform/x86: amd-pmc: Move to later in the suspend process ACPI / x86: Add support for LPS0 callback handler platform/x86: thinkpad_acpi: consistently check fan_get_status return. platform/x86: hp-wmi: support omen thermal profile policy v1 platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls platform/x86: hp-wmi: Fix SW_TABLET_MODE detection method platform/x86: hp-wmi: Fix hp_wmi_read_int() reporting error (0x05) platform/x86: amd-pmc: Validate entry into the deepest state on resume platform/x86: thinkpad_acpi: Don't use test_bit on an integer platform/x86: thinkpad_acpi: Fix compiler warning about uninitialized err variable platform/x86: thinkpad_acpi: clean up dytc profile convert platform/x86: x86-android-tablets: Depend on EFI and SPI platform/x86: amd-pmc: uninitialized variable in amd_pmc_s2d_init() platform/x86: intel-uncore-freq: fix uncore_freq_common_init() error codes ...
2022-03-25SUNRPC: Do not dereference non-socket transports in sysfsTrond Myklebust2-1/+3
Do not cast the struct xprt to a sock_xprt unless we know it is a UDP or TCP transport. Otherwise the call to lock the mutex will scribble over whatever structure is actually there. This has been seen to cause hard system lockups when the underlying transport was RDMA. Fixes: b49ea673e119 ("SUNRPC: lock against ->sock changing during sysfs read") Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2022-03-25Merge branch 'akpm' (patches from Andrew)Linus Torvalds13-86/+168
Merge yet more updates from Andrew Morton: "This is the material which was staged after willystuff in linux-next. Subsystems affected by this patch series: mm (debug, selftests, pagecache, thp, rmap, migration, kasan, hugetlb, pagemap, madvise), and selftests" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (113 commits) selftests: kselftest framework: provide "finished" helper mm: madvise: MADV_DONTNEED_LOCKED mm: fix race between MADV_FREE reclaim and blkdev direct IO read mm: generalize ARCH_HAS_FILTER_PGPROT mm: unmap_mapping_range_tree() with i_mmap_rwsem shared mm: warn on deleting redirtied only if accounted mm/huge_memory: remove stale locking logic from __split_huge_pmd() mm/huge_memory: remove stale page_trans_huge_mapcount() mm/swapfile: remove stale reuse_swap_page() mm/khugepaged: remove reuse_swap_page() usage mm/huge_memory: streamline COW logic in do_huge_pmd_wp_page() mm: streamline COW logic in do_swap_page() mm: slightly clarify KSM logic in do_swap_page() mm: optimize do_wp_page() for fresh pages in local LRU pagevecs mm: optimize do_wp_page() for exclusive pages in the swapcache mm/huge_memory: make is_transparent_hugepage() static userfaultfd/selftests: enable hugetlb remap and remove event testing selftests/vm: add hugetlb madvise MADV_DONTNEED MADV_REMOVE test mm: enable MADV_DONTNEED for hugetlb mappings kasan: disable LOCKDEP when printing reports ...
2022-03-25Merge tag 'riscv-for-linus-5.18-mw0' of ↵Linus Torvalds3-0/+121
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - Support for Sv57-based virtual memory. - Various improvements for the MicroChip PolarFire SOC and the associated Icicle dev board, which should allow upstream kernels to boot without any additional modifications. - An improved memmove() implementation. - Support for the new Ssconfpmf and SBI PMU extensions, which allows for a much more useful perf implementation on RISC-V systems. - Support for restartable sequences. * tag 'riscv-for-linus-5.18-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (36 commits) rseq/selftests: Add support for RISC-V RISC-V: Add support for restartable sequence MAINTAINERS: Add entry for RISC-V PMU drivers Documentation: riscv: Remove the old documentation RISC-V: Add sscofpmf extension support RISC-V: Add perf platform driver based on SBI PMU extension RISC-V: Add RISC-V SBI PMU extension definitions RISC-V: Add a simple platform driver for RISC-V legacy perf RISC-V: Add a perf core library for pmu drivers RISC-V: Add CSR encodings for all HPMCOUNTERS RISC-V: Remove the current perf implementation RISC-V: Improve /proc/cpuinfo output for ISA extensions RISC-V: Do no continue isa string parsing without correct XLEN RISC-V: Implement multi-letter ISA extension probing framework RISC-V: Extract multi-letter extension names from "riscv, isa" RISC-V: Minimal parser for "riscv, isa" strings RISC-V: Correctly print supported extensions riscv: Fixed misaligned memory access. Fixed pointer comparison. MAINTAINERS: update riscv/microchip entry riscv: dts: microchip: add new peripherals to icicle kit device tree ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-07 17:52:15 +0300