summaryrefslogtreecommitdiff
path: root/init
AgeCommit message (Collapse)AuthorFilesLines
2021-01-08Revert "init/console: Use ttynull as a fallback when there is no console"Petr Mladek1-8/+2
This reverts commit 757055ae8dedf5333af17b3b5b4b70ba9bc9da4e. The commit caused that ttynull was used as the default console on several systems[1][2][3]. As a result, the console was blank even when a better alternative existed. It happened when there was no console configured on the command line and ttynull_init() was the first initcall calling register_console(). Or it happened when /dev/ did not exist when console_on_rootfs() was called. It was not able to open /dev/console even though a console driver was registered. It tried to add ttynull console but it obviously did not help. But ttynull became the preferred console and was used by /dev/console when it was available later. The commit tried to fix a historical problem that have been there for ages. The primary motivation was the commit 3cffa06aeef7ece30f6 ("printk/console: Allow to disable console output by using console="" or console=null"). It provided a clean solution for a workaround that was widely used and worked only by chance. This revert causes that the console="" or console=null command line options will again work only by chance. These options will cause that a particular console will be preferred and the default (tty) ones will not get enabled. There will be no console registered at all. As a result there won't be stdin, stdout, and stderr for the init process. But it worked exactly this way even before. The proper solution has to fulfill many conditions: + Register ttynull only when explicitly required or as the ultimate fallback. + ttynull should get associated with /dev/console but it must not become preferred console when used as a fallback. Especially, it must still be possible to replace it by a better console later. Such a change requires clean up of the register_console() code. Otherwise, it would be even harder to follow. Especially, the use of has_preferred_console and CON_CONSDEV flag is tricky. The clean up is risky. The ordering of consoles is not well defined. And any changes tend to break existing user settings. Do the revert at the least risky solution for now. [1] https://lore.kernel.org/linux-kselftest/20201221144302.GR4077@smile.fi.intel.com/ [2] https://lore.kernel.org/lkml/d2a3b3c0-e548-7dd1-730f-59bc5c04e191@synopsys.com/ [3] https://patchwork.ozlabs.org/project/linux-um/patch/20210105120128.10854-1-thomas@m3y3r.de/ Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reported-by: Vineet Gupta <vgupta@synopsys.com> Reported-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-04Merge branch 'rcu/urgent' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU fix from Paul McKenney: "This is a fix for a regression in the v5.10 merge window, but it was reported quite late in the v5.10 process, plus generating and testing the fix took some time. The regression is due to commit 36dadef23fcc ("kprobes: Init kprobes in early_initcall") which on powerpc can use RCU Tasks before initialization, resulting in boot failures. The fix is straightforward, simply moving initialization of RCU Tasks before the early_initcall()s. The fix has been exposed to -next and kbuild test robot testing, and has been tested by the PowerPC guys" * 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: rcu-tasks: Move RCU-tasks initialization to before early_initcall()
2020-12-22kasan, arm64: only use kasan_depth for software modesAndrey Konovalov1-1/+1
This is a preparatory commit for the upcoming addition of a new hardware tag-based (MTE-based) KASAN mode. Hardware tag-based KASAN won't use kasan_depth. Only define and use it when one of the software KASAN modes are enabled. No functional changes for software modes. Link: https://lkml.kernel.org/r/e16f15aeda90bc7fb4dfc2e243a14b74cc5c8219.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-16Merge tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-blockLinus Torvalds1-143/+128
Pull block updates from Jens Axboe: "Another series of killing more code than what is being added, again thanks to Christoph's relentless cleanups and tech debt tackling. This contains: - blk-iocost improvements (Baolin Wang) - part0 iostat fix (Jeffle Xu) - Disable iopoll for split bios (Jeffle Xu) - block tracepoint cleanups (Christoph Hellwig) - Merging of struct block_device and hd_struct (Christoph Hellwig) - Rework/cleanup of how block device sizes are updated (Christoph Hellwig) - Simplification of gendisk lookup and removal of block device aliasing (Christoph Hellwig) - Block device ioctl cleanups (Christoph Hellwig) - Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig) - Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig) - sbitmap improvements (Pavel Begunkov) - Hybrid polling fix (Pavel Begunkov) - bvec iteration improvements (Pavel Begunkov) - Zone revalidation fixes (Damien Le Moal) - blk-throttle limit fix (Yu Kuai) - Various little fixes" * tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits) blk-mq: fix msec comment from micro to milli seconds blk-mq: update arg in comment of blk_mq_map_queue blk-mq: add helper allocating tagset->tags Revert "block: Fix a lockdep complaint triggered by request queue flushing" nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class blk-mq: add new API of blk_mq_hctx_set_fq_lock_class block: disable iopoll for split bio block: Improve blk_revalidate_disk_zones() checks sbitmap: simplify wrap check sbitmap: replace CAS with atomic and sbitmap: remove swap_lock sbitmap: optimise sbitmap_deferred_clear() blk-mq: skip hybrid polling if iopoll doesn't spin blk-iocost: Factor out the base vrate change into a separate function blk-iocost: Factor out the active iocgs' state check into a separate function blk-iocost: Move the usage ratio calculation to the correct place blk-iocost: Remove unnecessary advance declaration blk-iocost: Fix some typos in comments blktrace: fix up a kerneldoc comment block: remove the request_queue to argument request based tracepoints ...
2020-12-16Merge tag 'printk-for-5.11' of ↵Linus Torvalds1-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Finally allow parallel writes and reads into/from the lockless ringbuffer. But it is not a complete solution. Readers are still serialized against each other. And nested writes are still prevented by printk_safe per-CPU buffers. - Use ttynull as the ultimate fallback for /dev/console. - Officially allow disabling console output by using console="" or console=null - A few code cleanups * tag 'printk-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: remove logbuf_lock writer-protection of ringbuffer printk: inline log_output(),log_store() in vprintk_store() printk: remove obsolete dead assignment printk/console: Allow to disable console output by using console="" or console=null init/console: Use ttynull as a fallback when there is no console printk: ringbuffer: Reference text_data_ring directly in callees.
2020-12-16Merge branch 'exec-update-lock-for-v5.11' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull exec-update-lock update from Eric Biederman: "The key point of this is to transform exec_update_mutex into a rw_semaphore so readers can be separated from writers. This makes it easier to understand what the holders of the lock are doing, and makes it harder to contend or deadlock on the lock. The real deadlock fix wound up in perf_event_open" * 'exec-update-lock-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: exec: Transform exec_update_mutex into a rw_semaphore
2020-12-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-3/+3
Merge misc updates from Andrew Morton: - a few random little subsystems - almost all of the MM patches which are staged ahead of linux-next material. I'll trickle to post-linux-next work in as the dependents get merged up. Subsystems affected by this patch series: kthread, kbuild, ide, ntfs, ocfs2, arch, and mm (slab-generic, slab, slub, dax, debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, hmm, vmalloc, documentation, kasan, pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction, oom-kill, migration, cma, page-poison, userfaultfd, zswap, zsmalloc, uaccess, zram, and cleanups). * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (200 commits) mm: cleanup kstrto*() usage mm: fix fall-through warnings for Clang mm: slub: convert sysfs sprintf family to sysfs_emit/sysfs_emit_at mm: shmem: convert shmem_enabled_show to use sysfs_emit_at mm:backing-dev: use sysfs_emit in macro defining functions mm: huge_memory: convert remaining use of sprintf to sysfs_emit and neatening mm: use sysfs_emit for struct kobject * uses mm: fix kernel-doc markups zram: break the strict dependency from lzo zram: add stat to gather incompressible pages since zram set up zram: support page writeback mm/process_vm_access: remove redundant initialization of iov_r mm/zsmalloc.c: rework the list_add code in insert_zspage() mm/zswap: move to use crypto_acomp API for hardware acceleration mm/zswap: fix passing zero to 'PTR_ERR' warning mm/zswap: make struct kernel_param_ops definitions const userfaultfd/selftests: hint the test runner on required privilege userfaultfd/selftests: fix retval check for userfaultfd_open() userfaultfd/selftests: always dump something in modes userfaultfd: selftests: make __{s,u}64 format specifiers portable ...
2020-12-15mm, page_alloc: do not rely on the order of page_poison and ↵Vlastimil Babka1-1/+1
init_on_alloc/free parameters Patch series "cleanup page poisoning", v3. I have identified a number of issues and opportunities for cleanup with CONFIG_PAGE_POISON and friends: - interaction with init_on_alloc and init_on_free parameters depends on the order of parameters (Patch 1) - the boot time enabling uses static key, but inefficienty (Patch 2) - sanity checking is incompatible with hibernation (Patch 3) - CONFIG_PAGE_POISONING_NO_SANITY can be removed now that we have init_on_free (Patch 4) - CONFIG_PAGE_POISONING_ZERO can be most likely removed now that we have init_on_free (Patch 5) This patch (of 5): Enabling page_poison=1 together with init_on_alloc=1 or init_on_free=1 produces a warning in dmesg that page_poison takes precedence. However, as these warnings are printed in early_param handlers for init_on_alloc/free, they are not printed if page_poison is enabled later on the command line (handlers are called in the order of their parameters), or when init_on_alloc/free is always enabled by the respective config option - before the page_poison early param handler is called, it is not considered to be enabled. This is inconsistent. We can remove the dependency on order by making the init_on_* parameters only set a boolean variable, and postponing the evaluation after all early params have been processed. Introduce a new init_mem_debugging_and_hardening() function for that, and move the related debug_pagealloc processing there as well. As a result init_mem_debugging_and_hardening() knows always accurately if init_on_* and/or page_poison options were enabled. Thus we can also optimize want_init_on_alloc() and want_init_on_free(). We don't need to check page_poisoning_enabled() there, we can instead not enable the init_on_* static keys at all, if page poisoning is enabled. This results in a simpler and more effective code. Link: https://lkml.kernel.org/r/20201113104033.22907-1-vbabka@suse.cz Link: https://lkml.kernel.org/r/20201113104033.22907-2-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mateusz Nosek <mateusznosek0@gmail.com> Cc: Laura Abbott <labbott@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15init/main: fix broken buffer_init when DEFERRED_STRUCT_PAGE_INIT setLin Feng1-2/+0
In the booting phase if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set, we have following callchain: start_kernel ... mm_init mem_init memblock_free_all reset_all_zones_managed_pages free_low_memory_core_early ... buffer_init nr_free_buffer_pages zone->managed_pages ... rest_init kernel_init kernel_init_freeable page_alloc_init_late kthread_run(deferred_init_memmap, NODE_DATA(nid), "pgdatinit%d", nid); wait_for_completion(&pgdat_init_all_done_comp); ... files_maxfiles_init It's clear that buffer_init depends on zone->managed_pages, but it's reset in reset_all_zones_managed_pages after that pages are readded into zone->managed_pages, but when buffer_init runs this process is half done and most of them will finally be added till deferred_init_memmap done. In large memory couting of nr_free_buffer_pages drifts too much, also drifting from kernels to kernels on same hardware. Fix is simple, it delays buffer_init run till deferred_init_memmap all done. But as corrected by this patch, max_buffer_heads becomes very large, the value is roughly as many as 4 times of totalram_pages, formula: max_buffer_heads = nrpages * (10%) * (PAGE_SIZE / sizeof(struct buffer_head)); Say in a 64GB memory box we have 16777216 pages, then max_buffer_heads turns out to be roughly 67,108,864. In common cases, should a buffer_head be mapped to one page/block(4KB)? So max_buffer_heads never exceeds totalram_pages. IMO it's likely to make buffer_heads_over_limit bool value alwasy false, then make codes 'if (buffer_heads_over_limit)' test in vmscan unnecessary. So this patch will change the original behavior related to buffer_heads_over_limit in vmscan since we used a half done value of zone->managed_pages before, or should we use a smaller factor(<10%) in previous formula. akpm: I think this is OK - the max_buffer_heads code is only needed on highmem machines, to prevent ZONE_NORMAL from being consumed by large amounts of buffer_heads attached to highmem pagecache. This problem will not occur on 64-bit machines, so this feature's non-functionality on such machines is a feature, not a bug. Link: https://lkml.kernel.org/r/20201123110500.103523-1-linf@wangsu.com Signed-off-by: Lin Feng <linf@wangsu.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15mm: fix page_owner initializing issue for arm32Zhenhua Huang1-0/+2
Page owner of pages used by page owner itself used is missing on arm32 targets. The reason is dummy_handle and failure_handle is not initialized correctly. Buddy allocator is used to initialize these two handles. However, buddy allocator is not ready when page owner calls it. This change fixed that by initializing page owner after buddy initialization. The working flow before and after this change are: original logic: 1. allocated memory for page_ext(using memblock). 2. invoke the init callback of page_ext_ops like page_owner(using buddy allocator). 3. initialize buddy. after this change: 1. allocated memory for page_ext(using memblock). 2. initialize buddy. 3. invoke the init callback of page_ext_ops like page_owner(using buddy allocator). with the change, failure/dummy_handle can get its correct value and page owner output for example has the one for page owner itself: Page allocated via order 2, mask 0x6202c0(GFP_USER|__GFP_NOWARN), pid 1006, ts 67278156558 ns PFN 543776 type Unmovable Block 531 type Unmovable Flags 0x0() init_page_owner+0x28/0x2f8 invoke_init_callbacks_flatmem+0x24/0x34 start_kernel+0x33c/0x5d8 Link: https://lkml.kernel.org/r/1603104925-5888-1-git-send-email-zhenhuah@codeaurora.org Signed-off-by: Zhenhua Huang <zhenhuah@codeaurora.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15Merge tag 'fixes-v5.11' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull misc fixes from Christian Brauner: "This contains several fixes which felt worth being combined into a single branch: - Use put_nsproxy() instead of open-coding it switch_task_namespaces() - Kirill's work to unify lifecycle management for all namespaces. The lifetime counters are used identically for all namespaces types. Namespaces may of course have additional unrelated counters and these are not altered. This work allows us to unify the type of the counters and reduces maintenance cost by moving the counter in one place and indicating that basic lifetime management is identical for all namespaces. - Peilin's fix adding three byte padding to Dmitry's PTRACE_GET_SYSCALL_INFO uapi struct to prevent an info leak. - Two smal patches to convert from the /* fall through */ comment annotation to the fallthrough keyword annotation which I had taken into my branch and into -next before df561f6688fe ("treewide: Use fallthrough pseudo-keyword") made it upstream which fixed this tree-wide. Since I didn't want to invalidate all testing for other commits I didn't rebase and kept them" * tag 'fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: nsproxy: use put_nsproxy() in switch_task_namespaces() sys: Convert to the new fallthrough notation signal: Convert to the new fallthrough notation time: Use generic ns_common::count cgroup: Use generic ns_common::count mnt: Use generic ns_common::count user: Use generic ns_common::count pid: Use generic ns_common::count ipc: Use generic ns_common::count uts: Use generic ns_common::count net: Use generic ns_common::count ns: Add a common refcount into ns_common ptrace: Prevent kernel-infoleak in ptrace_get_syscall_info()
2020-12-15Merge tag 's390-5.11-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: - Add support for the hugetlb_cma command line option to allocate gigantic hugepages using CMA - Add arch_get_random_long() support. - Add ap bus userspace notifications. - Increase default size of vmalloc area to 512GB and otherwise let it increase dynamically by the size of physical memory. This should fix all occurrences where the vmalloc area was not large enough. - Completely get rid of set_fs() (aka select SET_FS) and rework address space handling while doing that; making address space handling much more simple. - Reimplement getcpu vdso syscall in C. - Add support for extended SCLP responses (> 4k). This allows e.g. to handle also potential large system configurations. - Simplify KASAN by removing 3-level page table support and only supporting 4-levels from now on. - Improve debug-ability of the kernel decompressor code, which now prints also stack traces and symbols in case of problems to the console. - Remove more power management leftovers. - Other various fixes and improvements all over the place. * tag 's390-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (62 commits) s390/mm: add support to allocate gigantic hugepages using CMA s390/crypto: add arch_get_random_long() support s390/smp: perform initial CPU reset also for SMT siblings s390/mm: use invalid asce for user space when switching to init_mm s390/idle: fix accounting with machine checks s390/idle: add missing mt_cycles calculation s390/boot: add build-id to decompressor s390/kexec_file: fix diag308 subcode when loading crash kernel s390/cio: fix use-after-free in ccw_device_destroy_console s390/cio: remove pm support from ccw bus driver s390/cio: remove pm support from css-bus driver s390/cio: remove pm support from IO subchannel drivers s390/cio: remove pm support from chsc subchannel driver s390/vmur: remove unused pm related functions s390/tape: remove unsupported PM functions s390/cio: remove pm support from eadm-sch drivers s390: remove pm support from console drivers s390/dasd: remove unused pm related functions s390/zfcp: remove pm support from zfcp driver s390/ap: let bus_register() add the AP bus sysfs attributes ...
2020-12-15rcu-tasks: Move RCU-tasks initialization to before early_initcall()Uladzislau Rezki (Sony)1-0/+1
PowerPC testing encountered boot failures due to RCU Tasks not being fully initialized until core_initcall() time. This commit therefore initializes RCU Tasks (along with Rude RCU and RCU Tasks Trace) just before early_initcall() time, thus allowing waiting on RCU Tasks grace periods from early_initcall() handlers. Link: https://lore.kernel.org/rcu/87eekfh80a.fsf@dja-thinkpad.axtens.net/ Fixes: 36dadef23fcc ("kprobes: Init kprobes in early_initcall") Tested-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-12-14Merge branch 'for-5.11-null-console' into for-linusPetr Mladek1-2/+8
2020-12-12initramfs: fix clang build failureArnd Bergmann1-1/+1
There is only one function in init/initramfs.c that is in the .text section, and it is marked __weak. When building with clang-12 and the integrated assembler, this leads to a bug with recordmcount: ./scripts/recordmcount "init/initramfs.o" Cannot find symbol for section 2: .text. init/initramfs.o: failed I'm not quite sure what exactly goes wrong, but I notice that this function is only ever called from an __init function, and normally inlined. Marking it __init as well is clearly correct and it leads to recordmcount no longer complaining. Link: https://lkml.kernel.org/r/20201204165742.3815221-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Barret Rhoden <brho@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-10exec: Transform exec_update_mutex into a rw_semaphoreEric W. Biederman1-1/+1
Recently syzbot reported[0] that there is a deadlock amongst the users of exec_update_mutex. The problematic lock ordering found by lockdep was: perf_event_open (exec_update_mutex -> ovl_i_mutex) chown (ovl_i_mutex -> sb_writes) sendfile (sb_writes -> p->lock) by reading from a proc file and writing to overlayfs proc_pid_syscall (p->lock -> exec_update_mutex) While looking at possible solutions it occured to me that all of the users and possible users involved only wanted to state of the given process to remain the same. They are all readers. The only writer is exec. There is no reason for readers to block on each other. So fix this deadlock by transforming exec_update_mutex into a rw_semaphore named exec_update_lock that only exec takes for writing. Cc: Jann Horn <jannh@google.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Bernd Edlinger <bernd.edlinger@hotmail.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christopher Yeoh <cyeoh@au1.ibm.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Fixes: eea9673250db ("exec: Add exec_update_mutex to replace cred_guard_mutex") [0] https://lkml.kernel.org/r/00000000000063640c05ade8e3de@google.com Reported-by: syzbot+db9cdf3dd1f64252c6ef@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/87ft4mbqen.fsf@x220.int.ebiederm.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-12-06Merge tag 'kbuild-fixes-v5.10-2' of ↵Linus Torvalds1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Move -Wcast-align to W=3, which tends to be false-positive and there is no tree-wide solution. - Pass -fmacro-prefix-map to KBUILD_CPPFLAGS because it is a preprocessor option and makes sense for .S files as well. - Disable -gdwarf-2 for Clang's integrated assembler to avoid warnings. - Disable --orphan-handling=warn for LLD 10.0.1 to avoid warnings. - Fix undesirable line breaks in *.mod files. * tag 'kbuild-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: avoid split lines in .mod files kbuild: Disable CONFIG_LD_ORPHAN_WARN for ld.lld 10.0.1 kbuild: Hoist '--orphan-handling' into Kconfig Kbuild: do not emit debug info for assembly with LLVM_IAS=1 kbuild: use -fmacro-prefix-map for .S sources Makefile.extrawarn: move -Wcast-align to W=3
2020-12-02Merge tag 'trace-v5.10-rc6-bootconfig' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull bootconfig fixes from Steven Rostedt: "Have bootconfig size and checksum be little endian In case the bootconfig is created on one kind of endian machine, and then read on the other kind of endian kernel, the size and checksum will be incorrect. Instead, have both the size and checksum always be little endian and have the tool and the kernel convert it from little endian to or from the host endian" * tag 'trace-v5.10-rc6-bootconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: docs: bootconfig: Add the endianness of fields tools/bootconfig: Store size and checksum in footer as le32 bootconfig: Load size and checksum in the footer as le32
2020-12-02block: merge struct block_device and struct hd_structChristoph Hellwig1-11/+10
Instead of having two structures that represent each block device with different life time rules, merge them into a single one. This also greatly simplifies the reference counting rules, as we can use the inode reference count as the main reference count for the new struct block_device, with the device model reference front ending it for device model interaction. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-02block: remove the partno field from struct hd_structChristoph Hellwig1-1/+1
Just use the bd_partno field in struct block_device everywhere. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-02block: move the partition_meta_info to struct block_deviceChristoph Hellwig1-3/+4
Move the partition_meta_info to struct block_device in preparation for killing struct hd_struct. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-02init: cleanup match_dev_by_uuid and match_dev_by_labelChristoph Hellwig1-12/+6
Avoid a totally pointless goto label, and use the same style of comparism for both helpers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-02init: refactor devt_from_partuuidChristoph Hellwig1-37/+31
The code in devt_from_partuuid is very convoluted. Refactor a bit by sanitizing the goto and variable name usage. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-02init: refactor name_to_dev_tChristoph Hellwig1-93/+90
Split each case into a self-contained helper, and move the block dependent code entirely under the pre-existing #ifdef CONFIG_BLOCK. This allows to remove the blk_lookup_devt stub in genhd.h. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01kbuild: Disable CONFIG_LD_ORPHAN_WARN for ld.lld 10.0.1Nathan Chancellor1-0/+5
ld.lld 10.0.1 spews a bunch of various warnings about .rela sections, along with a few others. Newer versions of ld.lld do not have these warnings. As a result, do not add '--orphan-handling=warn' to LDFLAGS_vmlinux if ld.lld's version is not new enough. Link: https://github.com/ClangBuiltLinux/linux/issues/1187 Link: https://github.com/ClangBuiltLinux/linux/issues/1193 Reported-by: Arvind Sankar <nivedita@alum.mit.edu> Reported-by: kernelci.org bot <bot@kernelci.org> Reported-by: Mark Brown <broonie@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-12-01kbuild: Hoist '--orphan-handling' into KconfigNathan Chancellor1-0/+5
Currently, '--orphan-handling=warn' is spread out across four different architectures in their respective Makefiles, which makes it a little unruly to deal with in case it needs to be disabled for a specific linker version (in this case, ld.lld 10.0.1). To make it easier to control this, hoist this warning into Kconfig and the main Makefile so that disabling it is simpler, as the warning will only be enabled in a couple places (main Makefile and a couple of compressed boot folders that blow away LDFLAGS_vmlinx) and making it conditional is easier due to Kconfig syntax. One small additional benefit of this is saving a call to ld-option on incremental builds because we will have already evaluated it for CONFIG_LD_ORPHAN_WARN. To keep the list of supported architectures the same, introduce CONFIG_ARCH_WANT_LD_ORPHAN_WARN, which an architecture can select to gain this automatically after all of the sections are specified and size asserted. A special thanks to Kees Cook for the help text on this config. Link: https://github.com/ClangBuiltLinux/linux/issues/1187 Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-12-01bootconfig: Load size and checksum in the footer as le32Masami Hiramatsu1-2/+2
Load the size and the checksum fields in the footer as le32 instead of u32. This will allow us to apply bootconfig to the cross build initrd without caring the endianness. Link: https://lkml.kernel.org/r/160583934457.547349.10504070298990791074.stgit@devnote2 Reported-by: Steven Rostedt <rostedt@goodmis.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-27Merge tag 'printk-for-5.10-rc6-fixup' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk fixes from Petr Mladek: - do not lose trailing newline in pr_cont() calls - two trivial fixes for a dead store and a config description * tag 'printk-for-5.10-rc6-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: finalize records with trailing newlines printk: remove unneeded dead-store assignment init/Kconfig: Fix CPU number in LOG_CPU_MAX_BUF_SHIFT description
2020-11-20init/Kconfig: make COMPILE_TEST depend on !S390Heiko Carstens1-1/+1
While allmodconfig and allyesconfig build for s390 there are also various bots running compile tests with randconfig, where PCI is disabled. This reveals that a lot of drivers should actually depend on HAS_IOMEM. Adding this to each device driver would be a never ending story, therefore just disable COMPILE_TEST for s390. The reasoning is more or less the same as described in commit bc083a64b6c0 ("init/Kconfig: make COMPILE_TEST depend on !UML"). Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-20init/console: Use ttynull as a fallback when there is no consolePetr Mladek1-2/+8
stdin, stdout, and stderr standard I/O stream are created for the init process. They are not available when there is no console registered for /dev/console. It might lead to a crash when the init process tries to use them, see the commit 48021f98130880dd742 ("printk: handle blank console arguments passed in."). Normally, ttySX and ttyX consoles are used as a fallback when no consoles are defined via the command line, device tree, or SPCR. But there will be no console registered when an invalid console name is configured or when the configured consoles do not exist on the system. Users even try to avoid the console intentionally, for example, by using console="" or console=null. It is used on production systems where the serial port or terminal are not visible to users. Pushing messages to these consoles would just unnecessary slowdown the system. Make sure that stdin, stdout, stderr, and /dev/console are always available by a fallback to the existing ttynull driver. It has been implemented for exactly this purpose but it was used only when explicitly configured. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20201111135450.11214-2-pmladek@suse.com
2020-11-13bootconfig: Extend the magic check range to the preceding 3 bytesMasami Hiramatsu1-2/+12
Since Grub may align the size of initrd to 4 if user pass initrd from cpio, we have to check the preceding 3 bytes as well. Link: https://lkml.kernel.org/r/160520205132.303174.4876760192433315429.stgit@devnote2 Cc: stable@vger.kernel.org Fixes: 85c46b78da58 ("bootconfig: Add bootconfig magic word for indicating bootconfig explicitly") Reported-by: Chen Yu <yu.chen.surf@gmail.com> Tested-by: Chen Yu <yu.chen.surf@gmail.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-03init/Kconfig: Fix CPU number in LOG_CPU_MAX_BUF_SHIFT descriptionPaul Menzel1-1/+1
Currently, LOG_BUF_SHIFT defaults to 17, which is 2 ^ 17 bytes = 128 KB, and LOG_CPU_MAX_BUF_SHIFT defaults to 12, which is 2 ^ 12 bytes = 4 KB. Half of 128 KB is 64 KB, so more than 16 CPUs are required for the value to be used, as then the sum of contributions is greater than 64 KB for the first time. My guess is, that the description was written with the configuration values used in the SUSE in mind. Fixes: 23b2899f7f194f06e ("printk: allow increasing the ring buffer depending on the number of CPUs") Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20200811092924.6256-1-pmenzel@molgen.mpg.de
2020-10-19Merge tag 'linux-kselftest-kunit-5.10-rc1' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull more Kunit updates from Shuah Khan: - add Kunit to kernel_init() and remove KUnit from init calls entirely. This addresses the concern that Kunit would not work correctly during late init phase. - add a linker section where KUnit can put references to its test suites. This is the first step in transitioning to dispatching all KUnit tests from a centralized executor rather than having each as its own separate late_initcall. - add a centralized executor to dispatch tests rather than relying on late_initcall to schedule each test suite separately. Centralized execution is for built-in tests only; modules will execute tests when loaded. - convert bitfield test to use KUnit framework - Documentation updates for naming guidelines and how kunit_test_suite() works. - add test plan to KUnit TAP format * tag 'linux-kselftest-kunit-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: lib: kunit: Fix compilation test when using TEST_BIT_FIELD_COMPILE lib: kunit: add bitfield test conversion to KUnit Documentation: kunit: add a brief blurb about kunit_test_suite kunit: test: add test plan to KUnit TAP format init: main: add KUnit to kernel init kunit: test: create a single centralized executor for all tests vmlinux.lds.h: add linker section for KUnit test suites Documentation: kunit: Add naming guidelines
2020-10-16Merge tag 'net-next-5.10' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: - Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. - Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). - Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. - Allow more than 255 IPv4 multicast interfaces. - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. - In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. - Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. - Allow more calls to same peer in RxRPC. - Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. - Add TC actions for implementing MPLS L2 VPNs. - Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. - Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. - Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. - Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. - Support sleepable BPF programs, initially targeting LSM and tracing. - Add bpf_d_path() helper for returning full path for given 'struct path'. - Make bpf_tail_call compatible with bpf-to-bpf calls. - Allow BPF programs to call map_update_elem on sockmaps. - Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). - Support listing and getting information about bpf_links via the bpf syscall. - Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). - Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. - Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). - In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. - Add XDP support for Intel's igb driver. - Support offloading TC flower classification and filtering rules to mscc_ocelot switches. - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. - Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. - Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. - Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. - Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. - Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). * tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits) Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH" net, sockmap: Don't call bpf_prog_put() on NULL pointer bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo bpf, sockmap: Add locking annotations to iterator netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements net: fix pos incrementment in ipv6_route_seq_next net/smc: fix invalid return code in smcd_new_buf_create() net/smc: fix valid DMBE buffer sizes net/smc: fix use-after-free of delayed events bpfilter: Fix build error with CONFIG_BPFILTER_UMH cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info bpf: Fix register equivalence tracking. rxrpc: Fix loss of final ack on shutdown rxrpc: Fix bundle counting for exclusive connections netfilter: restore NF_INET_NUMHOOKS ibmveth: Identify ingress large send packets. ibmveth: Switch order of ibmveth_helper calls. cxgb4: handle 4-tuple PEDIT to NAT mode translation selftests: Add VRF route leaking tests ...
2020-10-16Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina: "The latest advances in computer science from the trivial queue" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: xtensa: fix Kconfig typo spelling.txt: Remove some duplicate entries mtd: rawnand: oxnas: cleanup/simplify code selftests: vm: add fragment CONFIG_GUP_BENCHMARK perf: Fix opt help text for --no-bpf-event HID: logitech-dj: Fix spelling in comment bootconfig: Fix kernel message mentioning CONFIG_BOOT_CONFIG MAINTAINERS: rectify MMP SUPPORT after moving cputype.h scif: Fix spelling of EACCES printk: fix global comment lib/bitmap.c: fix spello fs: Fix missing 'bit' in comment
2020-10-14Merge tag 'printk-for-5.10' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: "The big new thing is the fully lockless ringbuffer implementation, including the support for continuous lines. It will allow to store and read messages in any situation wihtout the risk of deadlocks and without the need of temporary per-CPU buffers. The access is still serialized by logbuf_lock. It synchronizes few more operations, for example, temporary buffer for formatting the message, syslog and kmsg_dump operations. The lock removal is being discussed and should be ready for the next release. The continuous lines are handled exactly the same way as before to avoid regressions in user space. It means that they are appended to the last message when the caller is the same. Only the last message can be extended. The data ring includes plain text of the messages. Except for an integer at the beginning of each message that points back to the descriptor ring with other metadata. The dictionary has to stay. journalctl uses it to filter the log. It allows to show messages related to a given device. The dictionary values are stored in the descriptor ring with the other metadata. This is the first part of the printk rework as discussed at Plumbers 2019, see https://lore.kernel.org/r/87k1acz5rx.fsf@linutronix.de. The next big step will be handling consoles by kthreads during the normal system operation. It will require special handling of situations when the kthreads could not get scheduled, for example, early boot, suspend, panic. Other changes: - Add John Ogness as a reviewer for printk subsystem. He is author of the rework and is familiar with the code and history. - Fix locking in serial8250_do_startup() to prevent lockdep report. - Few code cleanups" * tag 'printk-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (27 commits) printk: Use fallthrough pseudo-keyword printk: reduce setup_text_buf size to LOG_LINE_MAX printk: avoid and/or handle record truncation printk: remove dict ring printk: move dictionary keys to dev_printk_info printk: move printk_info into separate array printk: reimplement log_cont using record extension printk: ringbuffer: add finalization/extension support printk: ringbuffer: change representation of states printk: ringbuffer: clear initial reserved fields printk: ringbuffer: add BLK_DATALESS() macro printk: ringbuffer: relocate get_data() printk: ringbuffer: avoid memcpy() on state_var printk: ringbuffer: fix setting state in desc_read() kernel.h: Move oops_in_progress to printk.h scripts/gdb: update for lockless printk ringbuffer scripts/gdb: add utils.read_ulong() docs: vmcoreinfo: add lockless printk ringbuffer vmcoreinfo printk: reduce LOG_BUF_SHIFT range for H8300 printk: ringbuffer: support dataless records ...
2020-10-13Merge tag 'io_uring-5.10-2020-10-12' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+3
Pull io_uring updates from Jens Axboe: - Add blkcg accounting for io-wq offload (Dennis) - A use-after-free fix for io-wq (Hillf) - Cancelation fixes and improvements - Use proper files_struct references for offload - Cleanup of io_uring_get_socket() since that can now go into our own header - SQPOLL fixes and cleanups, and support for sharing the thread - Improvement to how page accounting is done for registered buffers and huge pages, accounting the real pinned state - Series cleaning up the xarray code (Willy) - Various cleanups, refactoring, and improvements (Pavel) - Use raw spinlock for io-wq (Sebastian) - Add support for ring restrictions (Stefano) * tag 'io_uring-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (62 commits) io_uring: keep a pointer ref_node in file_data io_uring: refactor *files_register()'s error paths io_uring: clean file_data access in files_register io_uring: don't delay io_init_req() error check io_uring: clean leftovers after splitting issue io_uring: remove timeout.list after hrtimer cancel io_uring: use a separate struct for timeout_remove io_uring: improve submit_state.ios_left accounting io_uring: simplify io_file_get() io_uring: kill extra check in fixed io_file_get() io_uring: clean up ->files grabbing io_uring: don't io_prep_async_work() linked reqs io_uring: Convert advanced XArray uses to the normal API io_uring: Fix XArray usage in io_uring_add_task_file io_uring: Fix use of XArray in __io_uring_files_cancel io_uring: fix break condition for __io_uring_register() waiting io_uring: no need to call xa_destroy() on empty xarray io_uring: batch account ->req_issue and task struct references io_uring: kill callback_head argument for io_req_task_work_add() io_uring: move req preps out of io_issue_sqe() ...
2020-10-13Merge tag 'docs-5.10' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull documentation updates from Jonathan Corbet: "As hoped, things calmed down for docs this cycle; fewer changes and almost no conflicts at all. This includes: - A reworked and expanded user-mode Linux document - Some simplifications and improvements for submitting-patches.rst - An emergency fix for (some) problems with Sphinx 3.x - Some welcome automarkup improvements to automatically generate cross-references to struct definitions and other documents - The usual collection of translation updates, typo fixes, etc" * tag 'docs-5.10' of git://git.lwn.net/linux: (81 commits) gpiolib: Update indentation in driver.rst for code excerpts Documentation/admin-guide: tainted-kernels: Fix typo occured Documentation: better locations for sysfs-pci, sysfs-tagging docs: programming-languages: refresh blurb on clang support Documentation: kvm: fix a typo Documentation: Chinese translation of Documentation/arm64/amu.rst doc: zh_CN: index files in arm64 subdirectory mailmap: add entry for <mstarovoitov@marvell.com> doc: seq_file: clarify role of *pos in ->next() docs: trace: ring-buffer-design.rst: use the new SPDX tag Documentation: kernel-parameters: clarify "module." parameters Fix references to nommu-mmap.rst docs: rewrite admin-guide/sysctl/abi.rst docs: fb: Remove vesafb scrollback boot option docs: fb: Remove sstfb scrollback boot option docs: fb: Remove matroxfb scrollback boot option docs: fb: Remove framebuffer scrollback boot option docs: replace the old User Mode Linux HowTo with a new one Documentation/admin-guide: blockdev/ramdisk: remove use of "rdev" Documentation/admin-guide: README & svga: remove use of "rdev" ...
2020-10-12Merge branch 'printk-rework' into for-linusPetr Mladek1-1/+2
2020-10-09init: main: add KUnit to kernel initBrendan Higgins1-0/+4
Although we have not seen any actual examples where KUnit doesn't work because it runs in the late init phase of the kernel, it has been a concern for some time that this could potentially be an issue in the future. So, remove KUnit from init calls entirely, instead call directly from kernel_init() so that KUnit runs after late init. Co-developed-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-10-01io_uring: don't rely on weak ->files referencesJens Axboe1-0/+3
Grab actual references to the files_struct. To avoid circular references issues due to this, we add a per-task note that keeps track of what io_uring contexts a task has used. When the tasks execs or exits its assigned files, we cancel requests based on this tracking. With that, we can grab proper references to the files table, and no longer need to rely on stashing away ring_fd and ring_file to check if the ring_fd may have been closed. Cc: stable@vger.kernel.org # v5.5+ Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24Fix references to nommu-mmap.rstStephen Kitt1-1/+1
nommu-mmap.rst was moved to Documentation/admin-guide/mm; this patch updates the remaining stale references to Documentation/mm. Fixes: 800c02f5d030 ("docs: move nommu-mmap.txt to admin-guide and rename to ReST") Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20200812092230.27541-1-steve@sk2.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+3
Two minor conflicts: 1) net/ipv4/route.c, adding a new local variable while moving another local variable and removing it's initial assignment. 2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes. One pretty prints the port mode differently, whilst another changes the driver to try and obtain the port mode from the port node rather than the switch node. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-19bootconfig: init: make xbc_namebuf staticJason Yan1-1/+1
This eliminates the following sparse warning: init/main.c:306:6: warning: symbol 'xbc_namebuf' was not declared. Should it be static? Link: https://lkml.kernel.org/r/20200915070324.2239473-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-09-18kprobes: tracing/kprobes: Fix to kill kprobes on initmem after bootMasami Hiramatsu1-0/+2
Since kprobe_event= cmdline option allows user to put kprobes on the functions in initmem, kprobe has to make such probes gone after boot. Currently the probes on the init functions in modules will be handled by module callback, but the kernel init text isn't handled. Without this, kprobes may access non-exist text area to disable or remove it. Link: https://lkml.kernel.org/r/159972810544.428528.1839307531600646955.stgit@devnote2 Fixes: 970988e19eb0 ("tracing/kprobe: Add kprobe_event= boot parameter") Cc: Jonathan Corbet <corbet@lwn.net> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-09-08printk: reduce LOG_BUF_SHIFT range for H8300John Ogness1-1/+2
The .bss section for the h8300 is relatively small. A value of CONFIG_LOG_BUF_SHIFT that is larger than 19 will create a static printk ringbuffer that is too large. Limit the range appropriately for the H8300. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20200812073122.25412-1-john.ogness@linutronix.de
2020-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
We got slightly different patches removing a double word in a comment in net/ipv4/raw.c - picked the version from net. Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached values instead of VNIC login response buffer (following what commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login response buffer") did). Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-04init: fix error check in clean_path()Barret Rhoden1-1/+1
init_stat() returns 0 on success, same as vfs_lstat(). When it replaced vfs_lstat(), the '!' was dropped. Fixes: 716308a5331b ("init: add an init_stat helper") Signed-off-by: Barret Rhoden <brho@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-01bootconfig: Fix kernel message mentioning CONFIG_BOOT_CONFIGShaokun Zhang1-1/+1
Fix up one typo: CONFIG_BOOTCONFIG -> CONFIG_BOOT_CONFIG Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-08-28bpf: Introduce sleepable BPF programsAlexei Starovoitov1-0/+1
Introduce sleepable BPF programs that can request such property for themselves via BPF_F_SLEEPABLE flag at program load time. In such case they will be able to use helpers like bpf_copy_from_user() that might sleep. At present only fentry/fexit/fmod_ret and lsm programs can request to be sleepable and only when they are attached to kernel functions that are known to allow sleeping. The non-sleepable programs are relying on implicit rcu_read_lock() and migrate_disable() to protect life time of programs, maps that they use and per-cpu kernel structures used to pass info between bpf programs and the kernel. The sleepable programs cannot be enclosed into rcu_read_lock(). migrate_disable() maps to preempt_disable() in non-RT kernels, so the progs should not be enclosed in migrate_disable() as well. Therefore rcu_read_lock_trace is used to protect the life time of sleepable progs. There are many networking and tracing program types. In many cases the 'struct bpf_prog *' pointer itself is rcu protected within some other kernel data structure and the kernel code is using rcu_dereference() to load that program pointer and call BPF_PROG_RUN() on it. All these cases are not touched. Instead sleepable bpf programs are allowed with bpf trampoline only. The program pointers are hard-coded into generated assembly of bpf trampoline and synchronize_rcu_tasks_trace() is used to protect the life time of the program. The same trampoline can hold both sleepable and non-sleepable progs. When rcu_read_lock_trace is held it means that some sleepable bpf program is running from bpf trampoline. Those programs can use bpf arrays and preallocated hash/lru maps. These map types are waiting on programs to complete via synchronize_rcu_tasks_trace(); Updates to trampoline now has to do synchronize_rcu_tasks_trace() and synchronize_rcu_tasks() to wait for sleepable progs to finish and for trampoline assembly to finish. This is the first step of introducing sleepable progs. Eventually dynamically allocated hash maps can be allowed and networking program types can become sleepable too. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: KP Singh <kpsingh@google.com> Link: https://lore.kernel.org/bpf/20200827220114.69225-3-alexei.starovoitov@gmail.com