summaryrefslogtreecommitdiff
path: root/lib/Kconfig.kgdb
AgeCommit message (Collapse)AuthorFilesLines
2013-06-18treewide: Fix typo in printkMasanari Iida1-2/+2
Correct spelling typo in printk within various drivers. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-03-02Merge tag 'for_linux-3.9' of ↵Linus Torvalds1-0/+18
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb Pull KGDB/KDB fixes and cleanups from Jason Wessel: "For a change we removed more code than we added. If people aren't using it we shouldn't be carrying it. :-) Cleanups: - Remove kdb ssb command - there is no in kernel disassembler to support it - Remove kdb ll command - Always caused a kernel oops and there were no bug reports so no one was using this command - Use kernel ARRAY_SIZE macro instead of array computations Fixes: - Stop oops in kdb if user executes kdb_defcmd with args - kdb help command truncated text - ppc64 support for kgdbts - Add missing kconfig option from original kdb port for dealing with catastrophic kernel crashes such that you can reboot automatically on continue from kdb" * tag 'for_linux-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb: kdb: Remove unhandled ssb command kdb: Prevent kernel oops with kdb_defcmd kdb: Remove the ll command kdb_main: fix help print kdb: Fix overlap in buffers with strcpy Fixed dead ifdef block by adding missing Kconfig option. kdb: Setup basic kdb state before invoking commands via kgdb kdb: use ARRAY_SIZE where possible kgdb/kgdbts: support ppc64 kdb: A fix for kdb command table expansion
2013-03-02Fixed dead ifdef block by adding missing Kconfig option.Robert Obermeier1-0/+18
Added missing Kconfig option KDB_CONTINUE_CATASTROPHIC which lead to a dead ifdef block in kernel/debug/kdb/kdb_main.c:73-75. The code using KDB_CONTINUE_CATASTROPHIC was originally introduced in commit '5d5314d6795f3c1c0f415348ff8c51f7de042b77' by Jason Wessel. This patchset ("kdb: core for kgdb back end (1 of 2)") added platform independent part of kdb to the linux kernel. The Kernel option however, even though it had the same options and behaviour on all supported architectures, was part of the x86 and ia64 patchset of KDB and therefore not pulled into the mainline kernel tree. I actually took the originally written Kconfig by Keith Owens <kaos@sgi.com> (2003-06-20 according to KDB changelog) and changed it to reflect the correct behaviour, as the KDUMP patchset is not part of the kernel and the expected functionality is missing from it. Signed-off-by: Robert Obermeier <obbi89@googlemail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-02-22Merge tag 'tty-3.9-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial patches from Greg Kroah-Hartman: "Here's the big tty/serial driver patches for 3.9-rc1. More tty port rework and fixes from Jiri here, as well as lots of individual serial driver updates and fixes. All of these have been in the linux-next tree for a while." * tag 'tty-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits) tty: mxser: improve error handling in mxser_probe() and mxser_module_init() serial: imx: fix uninitialized variable warning serial: tegra: assume CONFIG_OF TTY: do not update atime/mtime on read/write lguest: select CONFIG_TTY to build properly. ARM defconfigs: add missing inclusions of linux/platform_device.h fb/exynos: include platform_device.h ARM: sa1100/assabet: include platform_device.h directly serial: imx: Fix recursive locking bug pps: Fix build breakage from decoupling pps from tty tty: Remove ancient hardpps() pps: Additional cleanups in uart_handle_dcd_change pps: Move timestamp read into PPS code proper pps: Don't crash the machine when exiting will do pps: Fix a use-after free bug when unregistering a source. pps: Use pps_lookup_dev to reduce ldisc coupling pps: Add pps_lookup_dev() function tty: serial: uartlite: Support uartlite on big and little endian systems tty: serial: uartlite: Fix sparse and checkpatch warnings serial/arc-uart: Miscll DT related updates (Grant's review comments) ... Fix up trivial conflicts, mostly just due to the TTY config option clashing with the EXPERIMENTAL removal.
2013-01-19tty: Added a CONFIG_TTY option to allow removal of TTYJoe Millenbach1-0/+1
The option allows you to remove TTY and compile without errors. This saves space on systems that won't support TTY interfaces anyway. bloat-o-meter output is below. The bulk of this patch consists of Kconfig changes adding "depends on TTY" to various serial devices and similar drivers that require the TTY layer. Ideally, these dependencies would occur on a common intermediate symbol such as SERIO, but most drivers "select SERIO" rather than "depends on SERIO", and "select" does not respect dependencies. bloat-o-meter output comparing our previous minimal to new minimal by removing TTY. The list is filtered to not show removed entries with awk '$3 != "-"' as the list was very long. add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350) function old new delta chr_dev_init 166 170 +4 allow_signal 80 82 +2 static.__warned 143 142 -1 disallow_signal 63 62 -1 __set_special_pids 95 94 -1 unregister_console 126 121 -5 start_kernel 546 541 -5 register_console 593 588 -5 copy_from_user 45 40 -5 sys_setsid 128 120 -8 sys_vhangup 32 19 -13 do_exit 1543 1526 -17 bitmap_zero 60 40 -20 arch_local_irq_save 137 117 -20 release_task 674 652 -22 static.spin_unlock_irqrestore 308 260 -48 Signed-off-by: Joe Millenbach <jmillenbach@gmail.com> Reviewed-by: Jamey Sharp <jamey@minilop.net> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-18lib: remove depends on CONFIG_EXPERIMENTALKees Cook1-1/+1
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Andrew Morton <akpm@linux-foundation.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com> CC: James Morris <james.l.morris@oracle.com> CC: "Michael S. Tsirkin" <mst@redhat.com> CC: Akinobu Mita <akinobu.mita@gmail.com> CC: Ingo Molnar <mingo@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2010-05-21mips,kgdb: kdb low level trap catch and stack traceJason Wessel1-1/+1
The only way the debugger can handle a trap in inside rcu_lock, notify_die, or atomic_notifier_call_chain without a recursive fault is to have a low level "first opportunity handler" do_trap_or_bp() handler. Generally this will be something the vast majority of folks will not need, but for those who need it, it is added as a kernel .config option called KGDB_LOW_LEVEL_TRAP. Also added was a die notification for oops such that kdb can catch an oops for analysis. There appeared to be no obvious way to pass the struct pt_regs from the original exception back to the stack back tracer, so a special case was added to show_stack() for when kdb is active because you generally desire to generally look at the back trace of the original exception. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21x86,kgdb: Add low level debug hookJason Wessel1-0/+9
The only way the debugger can handle a trap in inside rcu_lock, notify_die, or atomic_notifier_call_chain without a triple fault is to have a low level "first opportunity handler" in the int3 exception handler. Generally this will be something the vast majority of folks will not need, but for those who need it, it is added as a kernel .config option called KGDB_LOW_LEVEL_TRAP. CC: Ingo Molnar <mingo@elte.hu> CC: Thomas Gleixner <tglx@linutronix.de> CC: H. Peter Anvin <hpa@zytor.com> CC: x86@kernel.org Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-21kgdboc,keyboard: Keyboard driver for kdb with kgdbJason Wessel1-0/+7
This patch adds in the kdb PS/2 keyboard driver. This was mostly a direct port from the original kdb where I cleaned up the code against checkpatch.pl and added the glue to stitch it into kgdb. This patch also enables early kdb debug via kgdbwait and the keyboard. All the access to configure kdb using either a serial console or the keyboard is done via kgdboc. If you want to use only the keyboard and want to break in early you would add to your kernel command arguments: kgdboc=kbd kgdbwait If you wanted serial and or the keyboard access you could use: kgdboc=kbd,ttyS0 You can also configure kgdboc as a kernel module or at run time with the sysfs where you can activate and deactivate kgdb. Turn it on: echo kbd,ttyS0 > /sys/module/kgdboc/parameters/kgdboc Turn it off: echo "" > /sys/module/kgdboc/parameters/kgdboc Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2010-05-21kgdb: core changes to support kdbJason Wessel1-1/+7
These are the minimum changes to the kgdb core in order to enable an API to connect a new front end (kdb) to the debug core. This patch introduces the dbg_kdb_mode variable controls where the user level I/O is routed. It will be routed to the gdbstub (kgdb) or to the kdb front end which is a simple shell available over the kgdboc connection. You can switch back and forth between kdb or the gdb stub mode of operation dynamically. From gdb stub mode you can blindly type "$3#33", or from the kdb mode you can enter "kgdb" to switch to the gdb stub. The logic in the debug core depends on kdb to look for the typical gdb connection sequences and return immediately with KGDB_PASS_EVENT if a gdb serial command sequence is detected. That should allow a reasonably seamless transition between kdb -> gdb without leaving the kernel exception state. The two gdb serial queries that kdb is responsible for detecting are the "?" and "qSupported" packets. CC: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Martin Hicks <mort@sgi.com>
2008-08-01kgdb: remove the requirement for CONFIG_FRAME_POINTERJason Wessel1-4/+7
There is no technical reason that the kgdb core requires frame pointers. It is up to the end user of KGDB to decide if they need them or not. [ anemo@mba.ocn.ne.jp: removed frame pointers on mips ] Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-07-23kgdb: remove unused HAVE_ARCH_KGDB_SHADOW_INFO config variableJason Wessel1-3/+0
Remove HAVE_ARCH_KGDB_SHADOW_INFO because it does not exist anywhere in the kernel mainline sources Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-05-05kgdb: kconfig fix xconfig/menuconfig elementJan Engelhardt1-7/+9
Kconfig.kgdb: fix menuconfig element Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-17kgdb: allow static kgdbts boot configurationJason Wessel1-0/+18
This patch adds in the ability to compile the kgdb internal test string into the kernel so as to run the tests at boot without changing the kernel boot arguments. This patch also changes all the error paths to invoke WARN_ON(1) which will emit the line number of the file and dump the kernel stack when an error occurs. You can disable the tests in a kernel that is built this way using "kgdbts=" Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17kgdb: add kgdb internal test suiteJason Wessel1-0/+13
This patch adds regression tests for testing the kgdb core and arch specific implementation. The kgdb test suite is designed to be built into the kernel and not as a module because it uses a number of low level kernel and kgdb primitives which should not be exported externally. The kgdb test suite is designed as a KGDB I/O module which simulates the communications that a debugger would have with kgdb. The tests are broken up in to a line by line and referenced here as a "get" which is kgdb requesting input and "put" which is kgdb sending a response. The kgdb suite can be invoked from the kernel command line arguments system or executed dynamically at run time. The test suite uses the variable "kgdbts" to obtain the information about which tests to run and to configure the verbosity level. The following are the various characters you can use with the kgdbts= line: When using the "kgdbts=" you only choose one of the following core test types: A = Run all the core tests silently V1 = Run all the core tests with minimal output V2 = Run all the core tests in debug mode You can also specify optional tests: N## = Go to sleep with interrupts of for ## seconds to test the HW NMI watchdog F## = Break at do_fork for ## iterations S## = Break at sys_open for ## iterations NOTE: that the do_fork and sys_open tests are mutually exclusive. To invoke the kgdb test suite from boot you use a kernel start argument as follows: kgdbts=V1 kgdbwait Or if you wanted to perform the NMI test for 6 seconds and do_fork test for 100 forks, you could use: kgdbts=V1N6F100 kgdbwait The test suite can also be invoked at run time with: echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts Or as another example: echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts When developing a new kgdb arch specific implementation or using these tests for the purpose of regression testing, several invocations are required. 1) Boot with the test suite enabled by using the kernel arguments "kgdbts=V1F100 kgdbwait" ## If kgdb arch specific implementation has NMI use "kgdbts=V1N6F100 2) After the system boot run the basic test. echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts 3) Run the concurrency tests. It is best to use n+1 while loops where n is the number of cpus you have in your system. The example below uses only two loops. ## This tests break points on sys_open while [ 1 ] ; do find / > /dev/null 2>&1 ; done & while [ 1 ] ; do find / > /dev/null 2>&1 ; done & echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c fg # and hit control-c ## This tests break points on do_fork while [ 1 ] ; do date > /dev/null ; done & while [ 1 ] ; do date > /dev/null ; done & echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts fg # and hit control-c Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17kgdb: coreJason Wessel1-0/+27
kgdb core code. Handles the protocol and the arch details. [ mingo@elte.hu: heavily modified, simplified and cleaned up. ] [ xemul@openvz.org: use find_task_by_pid_ns ] Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>