summaryrefslogtreecommitdiff
path: root/lib/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2023-12-11lib/stackdepot: use fixed-sized slots for stack recordsAndrey Konovalov1-0/+10
Instead of storing stack records in stack depot pools one right after another, use fixed-sized slots. Add a new Kconfig option STACKDEPOT_MAX_FRAMES that allows to select the size of the slot in frames. Use 64 as the default value, which is the maximum stack trace size both KASAN and KMSAN use right now. Also add descriptions for other stack depot Kconfig options. This is preparatory patch for implementing the eviction of stack records from the stack depot. Link: https://lkml.kernel.org/r/dce7d030a99ff61022509665187fac45b0827298.1700502145.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-11-05Merge tag 'cxl-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxlLinus Torvalds1-0/+3
Pull CXL (Compute Express Link) updates from Dan Williams: "The main new functionality this time is work to allow Linux to natively handle CXL link protocol errors signalled via PCIe AER for current generation CXL platforms. This required some enlightenment of the PCIe AER core to workaround the fact that current generation RCH (Restricted CXL Host) platforms physically hide topology details and registers via a mechanism called RCRB (Root Complex Register Block). The next major highlight is reworks to address bugs in parsing region configurations for next generation VH (Virtual Host) topologies. The old broken algorithm is replaced with a simpler one that significantly increases the number of region configurations supported by Linux. This is again relevant for error handling so that forward and reverse address translation of memory errors can be carried out by Linux for memory regions instantiated by platform firmware. As for other cross-tree work, the ACPI table parsing code has been refactored for reuse parsing the "CDAT" structure which is an ACPI-like data structure that is reported by CXL devices. That work is in preparation for v6.8 support for CXL QoS. Think of this as dynamic generation of NUMA node topology information generated by Linux rather than platform firmware. Lastly, a number of internal object lifetime issues have been resolved along with misc. fixes and feature updates (decoders_committed sysfs ABI). Summary: - Add support for RCH (Restricted CXL Host) Error recovery - Fix several region assembly bugs - Fix mem-device lifetime issues relative to the sanitize command and RCH topology. - Refactor ACPI table parsing for CDAT parsing re-use in preparation for CXL QOS support" * tag 'cxl-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (50 commits) lib/fw_table: Remove acpi_parse_entries_array() export cxl/pci: Change CXL AER support check to use native AER cxl/hdm: Remove broken error path cxl/hdm: Fix && vs || bug acpi: Move common tables helper functions to common lib cxl: Add support for reading CXL switch CDAT table cxl: Add checksum verification to CDAT from CXL cxl: Export QTG ids from CFMWS to sysfs as qos_class attribute cxl: Add decoders_committed sysfs attribute to cxl_port cxl: Add cxl_decoders_committed() helper cxl/core/regs: Rework cxl_map_pmu_regs() to use map->dev for devm cxl/core/regs: Rename phys_addr in cxl_map_component_regs() PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler cxl/pci: Disable root port interrupts in RCH mode cxl/pci: Add RCH downstream port error logging cxl/pci: Map RCH downstream AER registers for logging protocol errors cxl/pci: Update CXL error logging to use RAS register address PCI/AER: Refactor cper_print_aer() for use by CXL driver module cxl/pci: Add RCH downstream port AER register discovery ...
2023-10-31Merge tag 'bcachefs-2023-10-30' of https://evilpiepirate.org/git/bcachefsLinus Torvalds1-0/+3
Pull initial bcachefs updates from Kent Overstreet: "Here's the bcachefs filesystem pull request. One new patch since last week: the exportfs constants ended up conflicting with other filesystems that are also getting added to the global enum, so switched to new constants picked by Amir. The only new non fs/bcachefs/ patch is the objtool patch that adds bcachefs functions to the list of noreturns. The patch that exports osq_lock() has been dropped for now, per Ingo" * tag 'bcachefs-2023-10-30' of https://evilpiepirate.org/git/bcachefs: (2781 commits) exportfs: Change bcachefs fid_type enum to avoid conflicts bcachefs: Refactor memcpy into direct assignment bcachefs: Fix drop_alloc_keys() bcachefs: snapshot_create_lock bcachefs: Fix snapshot skiplists during snapshot deletion bcachefs: bch2_sb_field_get() refactoring bcachefs: KEY_TYPE_error now counts towards i_sectors bcachefs: Fix handling of unknown bkey types bcachefs: Switch to unsafe_memcpy() in a few places bcachefs: Use struct_size() bcachefs: Correctly initialize new buckets on device resize bcachefs: Fix another smatch complaint bcachefs: Use strsep() in split_devs() bcachefs: Add iops fields to bch_member bcachefs: Rename bch_sb_field_members -> bch_sb_field_members_v1 bcachefs: New superblock section members_v2 bcachefs: Add new helper to retrieve bch_member from sb bcachefs: bucket_lock() is now a sleepable lock bcachefs: fix crc32c checksum merge byte order problem bcachefs: Fix bch2_inode_delete_keys() ...
2023-10-28acpi: Move common tables helper functions to common libDave Jiang1-0/+3
Some of the routines in ACPI driver/acpi/tables.c can be shared with parsing CDAT. CDAT is a device-provided data structure that is formatted similar to a platform provided ACPI table. CDAT is used by CXL and can exist on platforms that do not use ACPI. Split out the common routine from ACPI to accommodate platforms that do not support ACPI and move that to /lib. The common routines can be built outside of ACPI if FIRMWARE_TABLES is selected. Link: https://lore.kernel.org/linux-cxl/CAJZ5v0jipbtTNnsA0-o5ozOk8ZgWnOg34m34a9pPenTyRLj=6A@mail.gmail.com/ Suggested-by: "Rafael J. Wysocki" <rafael@kernel.org> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Acked-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/169713683430.2205276.17899451119920103445.stgit@djiang5-mobl3 Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-10-19bcache: move closures to lib/Kent Overstreet1-0/+3
Prep work for bcachefs - being a fork of bcache it also uses closures Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> Acked-by: Coly Li <colyli@suse.de> Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
2023-10-16lib: add light-weight queuing mechanism.NeilBrown1-0/+5
lwq is a FIFO single-linked queue that only requires a spinlock for dequeueing, which happens in process context. Enqueueing is atomic with no spinlock and can happen in any context. This is particularly useful when work items are queued from BH or IRQ context, and when they are handled one at a time by dedicated threads. Avoiding any locking when enqueueing means there is no need to disable BH or interrupts, which is generally best avoided (particularly when there are any RT tasks on the machine). This solution is superior to using "list_head" links because we need half as many pointers in the data structures, and because list_head lists would need locking to add items to the queue. This solution is superior to a bespoke solution as all locking and container_of casting is integrated, so the interface is simple. Despite the similar name, this solution meets a distinctly different need to kfifo. kfifo provides a fixed sized circular buffer to which data can be added at one end and removed at the other, and does not provide any locking. lwq does not have any size limit and works with data structures (objects?) rather than data (bytes). A unit test for basic functionality, which runs at boot time, is included. Signed-off-by: NeilBrown <neilb@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com> Cc: Kees Cook <keescook@chromium.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: David Gow <davidgow@google.com> Cc: linux-kernel@vger.kernel.org Message-Id: <20230911111333.4d1a872330e924a00acb905b@linux-foundation.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-08-18lib/bch.c: use bitrev instead of internal logicJohn Sanpe1-0/+1
Replace internal logic with separate bitrev library. Link: https://lkml.kernel.org/r/20230730081717.1498217-1-sanpeqf@gmail.com Signed-off-by: John Sanpe <sanpeqf@gmail.com> Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-05Kconfig: introduce HAS_IOPORT option and select it as necessaryNiklas Schnelle1-0/+4
We introduce a new HAS_IOPORT Kconfig option to indicate support for I/O Port access. In a future patch HAS_IOPORT=n will disable compilation of the I/O accessor functions inb()/outb() and friends on architectures which can not meaningfully support legacy I/O spaces such as s390. The following architectures do not select HAS_IOPORT: * ARC * C-SKY * Hexagon * Nios II * OpenRISC * s390 * User-Mode Linux * Xtensa All other architectures select HAS_IOPORT at least conditionally. The "depends on" relations on HAS_IOPORT in drivers as well as ifdefs for HAS_IOPORT specific sections will be added in subsequent patches on a per subsystem basis. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@kernel.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> # for ARCH=um Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-12-14Merge tag 'for-linus-iommufd' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd Pull iommufd implementation from Jason Gunthorpe: "iommufd is the user API to control the IOMMU subsystem as it relates to managing IO page tables that point at user space memory. It takes over from drivers/vfio/vfio_iommu_type1.c (aka the VFIO container) which is the VFIO specific interface for a similar idea. We see a broad need for extended features, some being highly IOMMU device specific: - Binding iommu_domain's to PASID/SSID - Userspace IO page tables, for ARM, x86 and S390 - Kernel bypassed invalidation of user page tables - Re-use of the KVM page table in the IOMMU - Dirty page tracking in the IOMMU - Runtime Increase/Decrease of IOPTE size - PRI support with faults resolved in userspace Many of these HW features exist to support VM use cases - for instance the combination of PASID, PRI and Userspace IO Page Tables allows an implementation of DMA Shared Virtual Addressing (vSVA) within a guest. Dirty tracking enables VM live migration with SRIOV devices and PASID support allow creating "scalable IOV" devices, among other things. As these features are fundamental to a VM platform they need to be uniformly exposed to all the driver families that do DMA into VMs, which is currently VFIO and VDPA" For more background, see the extended explanations in Jason's pull request: https://lore.kernel.org/lkml/Y5dzTU8dlmXTbzoJ@nvidia.com/ * tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (62 commits) iommufd: Change the order of MSI setup iommufd: Improve a few unclear bits of code iommufd: Fix comment typos vfio: Move vfio group specific code into group.c vfio: Refactor dma APIs for emulated devices vfio: Wrap vfio group module init/clean code into helpers vfio: Refactor vfio_device open and close vfio: Make vfio_device_open() truly device specific vfio: Swap order of vfio_device_container_register() and open_device() vfio: Set device->group in helper function vfio: Create wrappers for group register/unregister vfio: Move the sanity check of the group to vfio_create_group() vfio: Simplify vfio_create_group() iommufd: Allow iommufd to supply /dev/vfio/vfio vfio: Make vfio_container optionally compiled vfio: Move container related MODULE_ALIAS statements into container.c vfio-iommufd: Support iommufd for emulated VFIO devices vfio-iommufd: Support iommufd for physical VFIO devices vfio-iommufd: Allow iommufd to be used in place of a container fd vfio: Use IOMMU_CAP_ENFORCE_CACHE_COHERENCY for vfio_file_enforced_coherent() ...
2022-12-14Merge tag 'net-next-6.2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations - Add inet drop monitor support - A few GRO performance improvements - Add infrastructure for atomic dev stats, addressing long standing data races - De-duplicate common code between OVS and conntrack offloading infrastructure - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs - Add the helper support for connection-tracking OVS offload BPF: - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF - Make cgroup local storage available to non-cgroup attached BPF programs - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers - A relevant bunch of BPF verifier fixes and improvements - Veristat tool improvements to support custom filtering, sorting, and replay of results - Add LLVM disassembler as default library for dumping JITed code - Lots of new BPF documentation for various BPF maps - Add bpf_rcu_read_{,un}lock() support for sleepable programs - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs - Add support storing struct task_struct objects as kptrs in maps - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions Protocols: - TCP: implement Protective Load Balancing across switch links - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path - UDP: Introduce optional per-netns hash lookup table - IPv6: simplify and cleanup sockets disposal - Netlink: support different type policies for each generic netlink operation - MPTCP: add MSG_FASTOPEN and FastOpen listener side support - MPTCP: add netlink notification support for listener sockets events - SCTP: add VRF support, allowing sctp sockets binding to VRF devices - Add bridging MAC Authentication Bypass (MAB) support - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading - IPSec: extended ack support for more descriptive XFRM error reporting - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks - Tun: bump the link speed from 10Mbps to 10Gbps - Tun/VirtioNet: implement UDP segmentation offload support Driver API: - PHY/SFP: improve power level switching between standard level 1 and the higher power levels - New API for netdev <-> devlink_port linkage - PTP: convert existing drivers to new frequency adjustment implementation - DSA: add support for rx offloading - Autoload DSA tagging driver when dynamically changing protocol - Add new PCP and APPTRUST attributes to Data Center Bridging - Add configuration support for 800Gbps link speed - Add devlink port function attribute to enable/disable RoCE and migratable - Extend devlink-rate to support strict prioriry and weighted fair queuing - Add devlink support to directly reading from region memory - New device tree helper to fetch MAC address from nvmem - New big TCP helper to simplify temporary header stripping New hardware / drivers: - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches - Marvel Prestera AC5X Ethernet Switch - WangXun 10 Gigabit NIC - Motorcomm yt8521 Gigabit Ethernet - Microchip ksz9563 Gigabit Ethernet Switch - Microsoft Azure Network Adapter - Linux Automation 10Base-T1L adapter - PHY: - Aquantia AQR112 and AQR412 - Motorcomm YT8531S - PTP: - Orolia ART-CARD - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets - Realtek RTL8852BE and RTL8723DS - Cypress.CYW4373A0 WiFi + Bluetooth combo device Drivers: - CAN: - gs_usb: bus error reporting support - kvaser_usb: listen only and bus error reporting support - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping - implement devlink-rate support - support direct read from memory - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate - Support for enhanced events compression - extend H/W offload packet manipulation capabilities - implement IPSec packet offload mode - nVidia/Mellanox (mlx4): - better big TCP support - Netronome Ethernet NICs (nfp): - IPsec offload support - add support for multicast filter - Broadcom: - RSS and PTP support improvements - AMD/SolarFlare: - netlink extened ack improvements - add basic flower matches to offload, and related stats - Virtual NICs: - ibmvnic: introduce affinity hint support - small / embedded: - FreeScale fec: add initial XDP support - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood - TI am65-cpsw: add suspend/resume support - Mediatek MT7986: add RX wireless wthernet dispatch support - Realtek 8169: enable GRO software interrupt coalescing per default - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support - add ip6gre support - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support - enable flow offload support - Renesas: - add rswitch R-Car Gen4 gPTP support - Microchip (lan966x): - add full XDP support - add TC H/W offload via VCAP - enable PTP on bridge interfaces - Microchip (ksz8): - add MTU support for KSZ8 series - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support - add ack signal support - enable coredump support - remain_on_channel support - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support - RealTek WiFi (rtw89): - new dynamic header firmware format support - wake-over-WLAN support" * tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits) ipvs: fix type warning in do_div() on 32 bit net: lan966x: Remove a useless test in lan966x_ptp_add_trap() net: ipa: add IPA v4.7 support dt-bindings: net: qcom,ipa: Add SM6350 compatible bnxt: Use generic HBH removal helper in tx path IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver selftests: forwarding: Add bridge MDB test selftests: forwarding: Rename bridge_mdb test bridge: mcast: Support replacement of MDB port group entries bridge: mcast: Allow user space to specify MDB entry routing protocol bridge: mcast: Allow user space to add (*, G) with a source list and filter mode bridge: mcast: Add support for (*, G) with a source list and filter mode bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source bridge: mcast: Add a flag for user installed source entries bridge: mcast: Expose __br_multicast_del_group_src() bridge: mcast: Expose br_multicast_new_group_src() bridge: mcast: Add a centralized error path bridge: mcast: Place netlink policy before validation functions bridge: mcast: Split (*, G) and (S, G) addition into different functions bridge: mcast: Do not derive entry type from its filter mode ...
2022-12-13Merge tag 'mm-nonmm-stable-2022-12-12' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - A ptrace API cleanup series from Sergey Shtylyov - Fixes and cleanups for kexec from ye xingchen - nilfs2 updates from Ryusuke Konishi - squashfs feature work from Xiaoming Ni: permit configuration of the filesystem's compression concurrency from the mount command line - A series from Akinobu Mita which addresses bound checking errors when writing to debugfs files - A series from Yang Yingliang to address rapidio memory leaks - A series from Zheng Yejian to address possible overflow errors in encode_comp_t() - And a whole shower of singleton patches all over the place * tag 'mm-nonmm-stable-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (79 commits) ipc: fix memory leak in init_mqueue_fs() hfsplus: fix bug causing custom uid and gid being unable to be assigned with mount rapidio: devices: fix missing put_device in mport_cdev_open kcov: fix spelling typos in comments hfs: Fix OOB Write in hfs_asc2mac hfs: fix OOB Read in __hfs_brec_find relay: fix type mismatch when allocating memory in relay_create_buf() ocfs2: always read both high and low parts of dinode link count io-mapping: move some code within the include guarded section kernel: kcsan: kcsan_test: build without structleak plugin mailmap: update email for Iskren Chernev eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD rapidio: fix possible UAF when kfifo_alloc() fails relay: use strscpy() is more robust and safer cpumask: limit visibility of FORCE_NR_CPUS acct: fix potential integer overflow in encode_comp_t() acct: fix accuracy loss for input value of encode_comp_t() linux/init.h: include <linux/build_bug.h> and <linux/stringify.h> rapidio: rio: fix possible name leak in rio_register_mport() rapidio: fix possible name leaks when rio_add_device() fails ...
2022-12-13lib: packing: replace bit_reverse() with bitrev8()Uladzislau Koshchanka1-0/+1
Remove bit_reverse() function. Instead use bitrev8() from linux/bitrev.h + bitshift. Reduces code-repetition. Signed-off-by: Uladzislau Koshchanka <koshchanka@gmail.com> Link: https://lore.kernel.org/r/20221210004423.32332-1-koshchanka@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01cpumask: limit visibility of FORCE_NR_CPUSYury Norov1-2/+2
In current form, FORCE_NR_CPUS is visible to all users building their kernels, even not experts. It is also set in allmodconfig or allyesconfig, which is not a correct behavior. This patch fixes it. It also changes the parameter short description: removes implementation details and highlights the effect of the change. Link: https://lkml.kernel.org/r/20221116172451.274938-1-yury.norov@gmail.com Signed-off-by: Yury Norov <yury.norov@gmail.com> Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Valentin Schneider <vschneid@redhat.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sander Vanheule <sander@svanheule.net> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-29interval-tree: Add a utility to iterate over spans in an interval treeJason Gunthorpe1-0/+4
The span iterator travels over the indexes of the interval_tree, not the nodes, and classifies spans of indexes as either 'used' or 'hole'. 'used' spans are fully covered by nodes in the tree and 'hole' spans have no node intersecting the span. This is done greedily such that spans are maximally sized and every iteration step switches between used/hole. As an example a trivial allocator can be written as: for (interval_tree_span_iter_first(&span, itree, 0, ULONG_MAX); !interval_tree_span_iter_done(&span); interval_tree_span_iter_next(&span)) if (span.is_hole && span.last_hole - span.start_hole >= allocation_size - 1) return span.start_hole; With all the tricky boundary conditions handled by the library code. The following iommufd patches have several algorithms for its overlapping node interval trees that are significantly simplified with this kind of iteration primitive. As it seems generally useful, put it into lib/. Link: https://lore.kernel.org/r/3-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Yi Liu <yi.l.liu@intel.com> Tested-by: Lixiao Yang <lixiao.yang@intel.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-11-14memregion: Add cpu_cache_invalidate_memregion() interfaceDavidlohr Bueso1-0/+3
With CXL security features, and CXL dynamic provisioning, global CPU cache flushing nvdimm requirements are no longer specific to that subsystem, even beyond the scope of security_ops. CXL will need such semantics for features not necessarily limited to persistent memory. The functionality this is enabling is to be able to instantaneously secure erase potentially terabytes of memory at once and the kernel needs to be sure that none of the data from before the erase is still present in the cache. It is also used when unlocking a memory device where speculative reads and firmware accesses could have cached poison from before the device was unlocked. Lastly this facility is used when mapping new devices, or new capacity into an established physical address range. I.e. when the driver switches DeviceA mapping AddressX to DeviceB mapping AddressX then any cached data from DeviceA:AddressX needs to be invalidated. This capability is typically only used once per-boot (for unlock), or once per bare metal provisioning event (secure erase), like when handing off the system to another tenant or decommissioning a device. It may also be used for dynamic CXL region provisioning. Users must first call cpu_cache_has_invalidate_memregion() to know whether this functionality is available on the architecture. On x86 this respects the constraints of when wbinvd() is tolerable. It is already the case that wbinvd() is problematic to allow in VMs due its global performance impact and KVM, for example, has been known to just trap and ignore the call. With confidential computing guest execution of wbinvd() may even trigger an exception. Given guests should not be messing with the bare metal address map via CXL configuration changes cpu_cache_has_invalidate_memregion() returns false in VMs. While this global cache invalidation facility, is exported to modules, since NVDIMM and CXL support can be built as a module, it is not for general use. The intent is that this facility is not available outside of specific "device-memory" use cases. To make that expectation as clear as possible the API is scoped to a new "DEVMEM" module namespace that only the NVDIMM and CXL subsystems are expected to import. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Davidlohr Bueso <dave@stgolabs.net> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Co-developed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-10-10Merge tag 'v6.1-p1' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Feed untrusted RNGs into /dev/random - Allow HWRNG sleeping to be more interruptible - Create lib/utils module - Setting private keys no longer required for akcipher - Remove tcrypt mode=1000 - Reorganised Kconfig entries Algorithms: - Load x86/sha512 based on CPU features - Add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher Drivers: - Add HACE crypto driver aspeed" * tag 'v6.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits) crypto: aspeed - Remove redundant dev_err call crypto: scatterwalk - Remove unused inline function scatterwalk_aligned() crypto: aead - Remove unused inline functions from aead crypto: bcm - Simplify obtain the name for cipher crypto: marvell/octeontx - use sysfs_emit() to instead of scnprintf() hwrng: core - start hwrng kthread also for untrusted sources crypto: zip - remove the unneeded result variable crypto: qat - add limit to linked list parsing crypto: octeontx2 - Remove the unneeded result variable crypto: ccp - Remove the unneeded result variable crypto: aspeed - Fix check for platform_get_irq() errors crypto: virtio - fix memory-leak crypto: cavium - prevent integer overflow loading firmware crypto: marvell/octeontx - prevent integer overflows crypto: aspeed - fix build error when only CRYPTO_DEV_ASPEED is enabled crypto: hisilicon/qm - fix the qos value initialization crypto: sun4i-ss - use DEFINE_SHOW_ATTRIBUTE to simplify sun4i_ss_debugfs crypto: tcrypt - add async speed test for aria cipher crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher crypto: aria - prepare generic module for optimized implementations ...
2022-10-10Merge tag 'bitmap-6.1-rc1' of https://github.com/norov/linuxLinus Torvalds1-0/+9
Pull bitmap updates from Yury Norov: - Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES (Phil Auld) - cleanup nr_cpu_ids vs nr_cpumask_bits mess (me) This series cleans that mess and adds new config FORCE_NR_CPUS that allows to optimize cpumask subsystem if the number of CPUs is known at compile-time. - optimize find_bit() functions (me) Reworks find_bit() functions based on new FIND_{FIRST,NEXT}_BIT() macros. - add find_nth_bit() (me) Adds find_nth_bit(), which is ~70 times faster than bitcounting with for_each() loop: for_each_set_bit(bit, mask, size) if (n-- == 0) return bit; Also adds bitmap_weight_and() to let people replace this pattern: tmp = bitmap_alloc(nbits); bitmap_and(tmp, map1, map2, nbits); weight = bitmap_weight(tmp, nbits); bitmap_free(tmp); with a single bitmap_weight_and() call. - repair cpumask_check() (me) After switching cpumask to use nr_cpu_ids, cpumask_check() started generating many false-positive warnings. This series fixes it. - Add for_each_cpu_andnot() and for_each_cpu_andnot() (Valentin Schneider) Extends the API with one more function and applies it in sched/core. * tag 'bitmap-6.1-rc1' of https://github.com/norov/linux: (28 commits) sched/core: Merge cpumask_andnot()+for_each_cpu() into for_each_cpu_andnot() lib/test_cpumask: Add for_each_cpu_and(not) tests cpumask: Introduce for_each_cpu_andnot() lib/find_bit: Introduce find_next_andnot_bit() cpumask: fix checking valid cpu range lib/bitmap: add tests for for_each() loops lib/find: optimize for_each() macros lib/bitmap: introduce for_each_set_bit_wrap() macro lib/find_bit: add find_next{,_and}_bit_wrap cpumask: switch for_each_cpu{,_not} to use for_each_bit() net: fix cpu_max_bits_warn() usage in netif_attrmask_next{,_and} cpumask: add cpumask_nth_{,and,andnot} lib/bitmap: remove bitmap_ord_to_pos lib/bitmap: add tests for find_nth_bit() lib: add find_nth{,_and,_andnot}_bit() lib/bitmap: add bitmap_weight_and() lib/bitmap: don't call __bitmap_weight() in kernel code tools: sync find_bit() implementation lib/find_bit: optimize find_next_bit() functions lib/find_bit: create find_first_zero_bit_le() ...
2022-10-02zstd: Fixing mixed module-builtin objectsAlexey Kardashevskiy1-2/+6
With CONFIG_ZSTD_COMPRESS=m and CONFIG_ZSTD_DECOMPRESS=y we end up in a situation when files from lib/zstd/common/ are compiled once to be linked later for ZSTD_DECOMPRESS (build-in) and ZSTD_COMPRESS (module) even though CFLAGS are different for builtins and modules. So far somehow this was not a problem but enabling LLVM LTO exposes the problem as: ld.lld: error: linking module flags 'Code Model': IDs have conflicting values in 'lib/built-in.a(zstd_common.o at 5868)' and 'ld-temp.o' This particular conflict is caused by KBUILD_CFLAGS=-mcmodel=medium vs. KBUILD_CFLAGS_MODULE=-mcmodel=large , modules use the large model on POWERPC as explained at https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/powerpc/Makefile?h=v5.18-rc4#n127 but the current use of common files is wrong anyway. This works around the issue by introducing a zstd_common module with shared code. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-09-21lib/cpumask: add FORCE_NR_CPUS config optionYury Norov1-0/+9
The size of cpumasks is hard-limited by compile-time parameter NR_CPUS, but defined at boot-time when kernel parses ACPI/DT tables, and stored in nr_cpu_ids. In many practical cases, number of CPUs for a target is known at compile time, and can be provided with NR_CPUS. In that case, compiler may be instructed to rely on NR_CPUS as on actual number of CPUs, not an upper limit. It allows to optimize many cpumask routines and significantly shrink size of the kernel image. This patch adds FORCE_NR_CPUS option to teach the compiler to rely on NR_CPUS and enable corresponding optimizations. If FORCE_NR_CPUS=y, kernel will not set nr_cpu_ids at boot, but only check that the actual number of possible CPUs is equal to NR_CPUS, and WARN if that doesn't hold. The new option is especially useful in embedded applications because kernel configurations are unique for each SoC, the number of CPUs is constant and known well, and memory limitations are typically harder. For my 4-CPU ARM64 build with NR_CPUS=4, FORCE_NR_CPUS=y saves 46KB: add/remove: 3/4 grow/shrink: 46/729 up/down: 652/-46952 (-46300) Signed-off-by: Yury Norov <yury.norov@gmail.com>
2022-08-19crypto: lib - create utils module and move __crypto_memneq into itEric Biggers1-3/+0
As requested at https://lore.kernel.org/r/YtEgzHuuMts0YBCz@gondor.apana.org.au, move __crypto_memneq into lib/crypto/ and put it under a new tristate. The tristate is CRYPTO_LIB_UTILS, and it builds a module libcryptoutils. As more crypto library utilities are being added, this creates a single place for them to go without cluttering up the main lib directory. The module's main file will be lib/crypto/utils.c. However, leave memneq.c as its own file because of its nonstandard license. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-07Merge tag 'mm-nonmm-stable-2022-08-06-2' of ↵Linus Torvalds1-9/+0
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc updates from Andrew Morton: "Updates to various subsystems which I help look after. lib, ocfs2, fatfs, autofs, squashfs, procfs, etc. A relatively small amount of material this time" * tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits) scripts/gdb: ensure the absolute path is generated on initial source MAINTAINERS: kunit: add David Gow as a maintainer of KUnit mailmap: add linux.dev alias for Brendan Higgins mailmap: update Kirill's email profile: setup_profiling_timer() is moslty not implemented ocfs2: fix a typo in a comment ocfs2: use the bitmap API to simplify code ocfs2: remove some useless functions lib/mpi: fix typo 'the the' in comment proc: add some (hopefully) insightful comments bdi: remove enum wb_congested_state kernel/hung_task: fix address space of proc_dohung_task_timeout_secs lib/lzo/lzo1x_compress.c: replace ternary operator with min() and min_t() squashfs: support reading fragments in readahead call squashfs: implement readahead squashfs: always build "file direct" version of page actor Revert "squashfs: provide backing_dev_info in order to disable read-ahead" fs/ocfs2: Fix spelling typo in comment ia64: old_rr4 added under CONFIG_HUGETLB_PAGE proc: fix test for "vsyscall=xonly" boot option ...
2022-08-05Merge tag 'asm-generic-6.0' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "There are three independent sets of changes: - Sai Prakash Ranjan adds tracing support to the asm-generic version of the MMIO accessors, which is intended to help understand problems with device drivers and has been part of Qualcomm's vendor kernels for many years - A patch from Sebastian Siewior to rework the handling of IRQ stacks in softirqs across architectures, which is needed for enabling PREEMPT_RT - The last patch to remove the CONFIG_VIRT_TO_BUS option and some of the code behind that, after the last users of this old interface made it in through the netdev, scsi, media and staging trees" * tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: uapi: asm-generic: fcntl: Fix typo 'the the' in comment arch/*/: remove CONFIG_VIRT_TO_BUS soc: qcom: geni: Disable MMIO tracing for GENI SE serial: qcom_geni_serial: Disable MMIO tracing for geni serial asm-generic/io: Add logging support for MMIO accessors KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM lib: Add register read/write tracing support drm/meson: Fix overflow implicit truncation warnings irqchip/tegra: Fix overflow implicit truncation warnings coresight: etm4x: Use asm-generic IO memory barriers arm64: io: Use asm-generic high level MMIO accessors arch/*: Disable softirq stacks on PREEMPT_RT.
2022-07-18lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizingVlastimil Babka1-9/+0
As Linus explained [1], setting the stackdepot hash table size as a config option is suboptimal, especially as stackdepot becomes a dependency of less "expert" subsystems than initially (e.g. DRM, networking, SLUB_DEBUG): : (a) it introduces a new compile-time question that isn't sane to ask : a regular user, but is now exposed to regular users. : (b) this by default uses 1MB of memory for a feature that didn't in : the past, so now if you have small machines you need to make sure you : make a special kernel config for them. Ideally we would employ rhashtable for fully automatic resizing, which should be feasible for many of the new users, but problematic for the original users with restricted context that call __stack_depot_save() with can_alloc == false, i.e. KASAN. However we can easily remove the config option and scale the hash table automatically with system memory. The STACK_HASH_MASK constant becomes stack_hash_mask variable and is used only in one mask operation, so the overhead should be negligible to none. For early allocation we can employ the existing alloc_large_system_hash() function and perform similar scaling for the late allocation. The existing limits of the config option (between 4k and 1M buckets) are preserved, and scaling factor is set to one bucket per 16kB memory so on 64bit the max 1M buckets (8MB memory) is achieved with 16GB system, while a 1GB system will use 512kB. Because KASAN is reported to need the maximum number of buckets even with smaller amounts of memory [2], set it as such when kasan_enabled(). If needed, the automatic scaling could be complemented with a boot-time kernel parameter, but it feels pointless to add it without a specific use case. [1] https://lore.kernel.org/all/CAHk-=wjC5nS+fnf6EzRD9yQRJApAhxx7gRB87ZV+pAWo9oVrTg@mail.gmail.com/ [2] https://lore.kernel.org/all/CACT4Y+Y4GZfXOru2z5tFPzFdaSUd+GFc6KVL=bsa0+1m197cQQ@mail.gmail.com/ Link: https://lkml.kernel.org/r/20220620150249.16814-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-15lib: Add register read/write tracing supportPrasad Sodagudi1-0/+7
Generic MMIO read/write i.e., __raw_{read,write}{b,l,w,q} accessors are typically used to read/write from/to memory mapped registers and can cause hangs or some undefined behaviour in following few cases, * If the access to the register space is unclocked, for example: if there is an access to multimedia(MM) block registers without MM clocks. * If the register space is protected and not set to be accessible from non-secure world, for example: only EL3 (EL: Exception level) access is allowed and any EL2/EL1 access is forbidden. * If xPU(memory/register protection units) is controlling access to certain memory/register space for specific clients. and more... Such cases usually results in instant reboot/SErrors/NOC or interconnect hangs and tracing these register accesses can be very helpful to debug such issues during initial development stages and also in later stages. So use ftrace trace events to log such MMIO register accesses which provides rich feature set such as early enablement of trace events, filtering capability, dumping ftrace logs on console and many more. Sample output: rwmmio_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700 rwmmio_post_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700 rwmmio_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 addr=0xfffffbfffdbff610 rwmmio_post_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 val=0x0 addr=0xfffffbfffdbff610 Co-developed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-06-12crypto: memneq - move into lib/Jason A. Donenfeld1-0/+3
This is used by code that doesn't need CONFIG_CRYPTO, so move this into lib/ with a Kconfig option so that it can be selected by whatever needs it. This fixes a linker error Zheng pointed out when CRYPTO_MANAGER_DISABLE_TESTS!=y and CRYPTO=m: lib/crypto/curve25519-selftest.o: In function `curve25519_selftest': curve25519-selftest.c:(.init.text+0x60): undefined reference to `__crypto_memneq' curve25519-selftest.c:(.init.text+0xec): undefined reference to `__crypto_memneq' curve25519-selftest.c:(.init.text+0x114): undefined reference to `__crypto_memneq' curve25519-selftest.c:(.init.text+0x154): undefined reference to `__crypto_memneq' Reported-by: Zheng Bin <zhengbin13@huawei.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: stable@vger.kernel.org Fixes: aa127963f1ca ("crypto: lib/curve25519 - re-add selftests") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-05-22lib: add generic polynomial calculationMichael Walle1-0/+3
Some temperature and voltage sensors use a polynomial to convert between raw data points and actual temperature or voltage. The polynomial is usually the result of a curve fitting of the diode characteristic. The BT1 PVT hwmon driver already uses such a polynonmial calculation which is rather generic. Move it to lib/ so other drivers can reuse it. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220401214032.3738095-2-michael@walle.cc Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-03-07crypto: add rocksoft 64b crc guard tag frameworkKeith Busch1-0/+9
Hardware specific features may be able to calculate a crc64, so provide a framework for drivers to register their implementation. If nothing is registered, fallback to the generic table lookup implementation. The implementation is modeled after the crct10dif equivalent. Signed-off-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20220303201312.3255347-7-kbusch@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-03Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-1/+0
Pull ARM fixes from Russell King: - Fix kgdb breakpoint for Thumb2 - Fix dependency for BITREVERSE kconfig - Fix nommu early_params and __setup returns * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9182/1: mmu: fix returns from early_param() and __setup() functions ARM: 9178/1: fix unmet dependency on BITREVERSE for HAVE_ARCH_BITREVERSE ARM: Fix kgdb breakpoint for Thumb2
2022-02-21ARM: 9178/1: fix unmet dependency on BITREVERSE for HAVE_ARCH_BITREVERSEJulian Braha1-1/+0
Resending this to properly add it to the patch tracker - thanks for letting me know, Arnd :) When ARM is enabled, and BITREVERSE is disabled, Kbuild gives the following warning: WARNING: unmet direct dependencies detected for HAVE_ARCH_BITREVERSE Depends on [n]: BITREVERSE [=n] Selected by [y]: - ARM [=y] && (CPU_32v7M [=n] || CPU_32v7 [=y]) && !CPU_32v6 [=n] This is because ARM selects HAVE_ARCH_BITREVERSE without selecting BITREVERSE, despite HAVE_ARCH_BITREVERSE depending on BITREVERSE. This unmet dependency bug was found by Kismet, a static analysis tool for Kconfig. Please advise if this is not the appropriate solution. Signed-off-by: Julian Braha <julianbraha@gmail.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-01-23Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linuxLinus Torvalds1-3/+0
Pull bitmap updates from Yury Norov: - introduce for_each_set_bitrange() - use find_first_*_bit() instead of find_next_*_bit() where possible - unify for_each_bit() macros * tag 'bitmap-5.17-rc1' of git://github.com/norov/linux: vsprintf: rework bitmap_list_string lib: bitmap: add performance test for bitmap_print_to_pagebuf bitmap: unify find_bit operations mm/percpu: micro-optimize pcpu_is_populated() Replace for_each_*_bit_from() with for_each_*_bit() where appropriate find: micro-optimize for_each_{set,clear}_bit() include/linux: move for_each_bit() macros from bitops.h to find.h cpumask: replace cpumask_next_* with cpumask_first_* where appropriate tools: sync tools/bitmap with mother linux all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate cpumask: use find_first_and_bit() lib: add find_first_and_bit() arch: remove GENERIC_FIND_FIRST_BIT entirely include: move find.h from asm_generic to linux bitops: move find_bit_*_le functions from le.h to find.h bitops: protect find_first_{,zero}_bit properly
2022-01-22lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()Vlastimil Babka1-0/+4
Currently, enabling CONFIG_STACKDEPOT means its stack_table will be allocated from memblock, even if stack depot ends up not actually used. The default size of stack_table is 4MB on 32-bit, 8MB on 64-bit. This is fine for use-cases such as KASAN which is also a config option and has overhead on its own. But it's an issue for functionality that has to be actually enabled on boot (page_owner) or depends on hardware (GPU drivers) and thus the memory might be wasted. This was raised as an issue [1] when attempting to add stackdepot support for SLUB's debug object tracking functionality. It's common to build kernels with CONFIG_SLUB_DEBUG and enable slub_debug on boot only when needed, or create only specific kmem caches with debugging for testing purposes. It would thus be more efficient if stackdepot's table was allocated only when actually going to be used. This patch thus makes the allocation (and whole stack_depot_init() call) optional: - Add a CONFIG_STACKDEPOT_ALWAYS_INIT flag to keep using the current well-defined point of allocation as part of mem_init(). Make CONFIG_KASAN select this flag. - Other users have to call stack_depot_init() as part of their own init when it's determined that stack depot will actually be used. This may depend on both config and runtime conditions. Convert current users which are page_owner and several in the DRM subsystem. Same will be done for SLUB later. - Because the init might now be called after the boot-time memblock allocation has given all memory to the buddy allocator, change stack_depot_init() to allocate stack_table with kvmalloc() when memblock is no longer available. Also handle allocation failure by disabling stackdepot (could have theoretically happened even with memblock allocation previously), and don't unnecessarily align the memblock allocation to its own size anymore. [1] https://lore.kernel.org/all/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXEhCvbZyA@mail.gmail.com/ Link: https://lkml.kernel.org/r/20211013073005.11351-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Marco Elver <elver@google.com> # stackdepot Cc: Marco Elver <elver@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Glitta <glittao@gmail.com> Cc: Imran Khan <imran.f.khan@oracle.com> From: Colin Ian King <colin.king@canonical.com> Subject: lib/stackdepot: fix spelling mistake and grammar in pr_err message There is a spelling mistake of the work allocation so fix this and re-phrase the message to make it easier to read. Link: https://lkml.kernel.org/r/20211015104159.11282-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Vlastimil Babka <vbabka@suse.cz> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup On FLATMEM, we call page_ext_init_flatmem_late() just before kmem_cache_init() which means stack_depot_init() (called by page owner init) will not recognize properly it should use kvmalloc() and not memblock_alloc(). memblock_alloc() will also not issue a warning and return a block memory that can be invalid and cause kernel page fault when saving stacks, as reported by the kernel test robot [1]. Fix this by moving page_ext_init_flatmem_late() below kmem_cache_init() so that slab_is_available() is true during stack_depot_init(). SPARSEMEM doesn't have this issue, as it doesn't do page_ext_init_flatmem_late(), but a different page_ext_init() even later in the boot process. Thanks to Mike Rapoport for pointing out the FLATMEM init ordering issue. While at it, also actually resolve a checkpatch warning in stack_depot_init() from DRM CI, which was supposed to be in the original patch already. [1] https://lore.kernel.org/all/20211014085450.GC18719@xsang-OptiPlex-9020/ Link: https://lkml.kernel.org/r/6abd9213-19a9-6d58-cedc-2414386d2d81@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: kernel test robot <oliver.sang@intel.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup3 Due to cd06ab2fd48f ("drm/locking: add backtrace for locking contended locks without backoff") landing recently to -next adding a new stack depot user in drivers/gpu/drm/drm_modeset_lock.c we need to add an appropriate call to stack_depot_init() there as well. Link: https://lkml.kernel.org/r/2a692365-cfa1-64f2-34e0-8aa5674dce5e@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Marco Elver <elver@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Glitta <glittao@gmail.com> Cc: Imran Khan <imran.f.khan@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup4 Due to 4e66934eaadc ("lib: add reference counting tracking infrastructure") landing recently to net-next adding a new stack depot user in lib/ref_tracker.c we need to add an appropriate call to stack_depot_init() there as well. Link: https://lkml.kernel.org/r/45c1b738-1a2f-5b5f-2f6d-86fab206d01c@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Slab <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-18lib/crypto: add prompts back to crypto librariesJustin M. Forbes1-0/+2
Commit 6048fdcc5f269 ("lib/crypto: blake2s: include as built-in") took away a number of prompt texts from other crypto libraries. This makes values flip from built-in to module when oldconfig runs, and causes problems when these crypto libs need to be built in for thingslike BIG_KEYS. Fixes: 6048fdcc5f269 ("lib/crypto: blake2s: include as built-in") Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: linux-crypto@vger.kernel.org Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org> [Jason: - moved menu into submenu of lib/ instead of root menu - fixed chacha sub-dependencies for CONFIG_CRYPTO] Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-01-15arch: remove GENERIC_FIND_FIRST_BIT entirelyYury Norov1-3/+0
In 5.12 cycle we enabled GENERIC_FIND_FIRST_BIT config option for ARM64 and MIPS. It increased performance and shrunk .text size; and so far I didn't receive any negative feedback on the change. https://lore.kernel.org/linux-arch/20210225135700.1381396-1-yury.norov@gmail.com/ Now I think it's a good time to switch all architectures to use find_{first,last}_bit() unconditionally, and so remove corresponding config option. The patch does't introduce functioal changes for arc, arm, arm64, mips, m68k, s390 and x86, for other architectures I expect improvement both in performance and .text size. Signed-off-by: Yury Norov <yury.norov@gmail.com> Tested-by: Alexander Lobakin <alobakin@pm.me> (mips) Reviewed-by: Alexander Lobakin <alobakin@pm.me> (mips) Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Will Deacon <will@kernel.org> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2021-12-07lib: add reference counting tracking infrastructureEric Dumazet1-0/+5
It can be hard to track where references are taken and released. In networking, we have annoying issues at device or netns dismantles, and we had various proposals to ease root causing them. This patch adds new infrastructure pairing refcount increases and decreases. This will self document code, because programmers will have to associate increments/decrements. This is controled by CONFIG_REF_TRACKER which can be selected by users of this feature. This adds both cpu and memory costs, and thus should probably be used with care. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-02Merge tag 'asm-generic-5.15' of ↵Linus Torvalds1-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "The main content for 5.15 is a series that cleans up the handling of strncpy_from_user() and strnlen_user(), removing a lot of slightly incorrect versions of these in favor of the lib/strn*.c helpers that implement these correctly and more efficiently. The only architectures that retain a private version now are mips, ia64, um and parisc. I had offered to convert those at all, but Thomas Bogendoerfer wanted to keep the mips version for the moment until he had a chance to do regression testing. The branch also contains two patches for bitops and for ffs()" * tag 'asm-generic-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: bitops/non-atomic: make @nr unsigned to avoid any DIV asm-generic: ffs: Drop bogus reference to ffz location asm-generic: reverse GENERIC_{STRNCPY_FROM,STRNLEN}_USER symbols asm-generic: remove extra strn{cpy_from,len}_user declarations asm-generic: uaccess: remove inline strncpy_from_user/strnlen_user s390: use generic strncpy/strnlen from_user microblaze: use generic strncpy/strnlen from_user csky: use generic strncpy/strnlen from_user arc: use generic strncpy/strnlen from_user hexagon: use generic strncpy/strnlen from_user h8300: remove stale strncpy_from_user asm-generic/uaccess.h: remove __strncpy_from_user/__strnlen_user
2021-07-30lib/test_string.c: move string selftest in the Runtime Testing menuMatteo Croce1-3/+0
STRING_SELFTEST is presented in the "Library routines" menu. Move it in Kernel hacking > Kernel Testing and Coverage > Runtime Testing together with other similar tests found in lib/ --- Runtime Testing <*> Test functions located in the hexdump module at runtime <*> Test string functions (NEW) <*> Test functions located in the string_helpers module at runtime <*> Test strscpy*() family of functions at runtime <*> Test kstrto*() family of functions at runtime <*> Test printf() family of functions at runtime <*> Test scanf() family of functions at runtime Link: https://lkml.kernel.org/r/20210719185158.190371-1-mcroce@linux.microsoft.com Signed-off-by: Matteo Croce <mcroce@microsoft.com> Cc: Peter Rosin <peda@axentia.se> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-30asm-generic: reverse GENERIC_{STRNCPY_FROM,STRNLEN}_USER symbolsArnd Bergmann1-2/+8
Most architectures do not need a custom implementation, and in most cases the generic implementation is preferred, so change the polariy on these Kconfig symbols to require architectures to select them when they provide their own version. The new name is CONFIG_ARCH_HAS_{STRNCPY_FROM,STRNLEN}_USER. The remaining architectures at the moment are: ia64, mips, parisc, um and xtensa. We should probably convert these as well, but I was not sure how far to take this series. Thomas Bogendoerfer had some concerns about converting mips but may still do some more detailed measurements to see which version is better. Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: linux-ia64@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linux-um@lists.infradead.org Cc: linux-xtensa@linux-xtensa.org Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Helge Deller <deller@gmx.de> # parisc Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-06-17lib: add iomem emulation (logic_iomem)Johannes Berg1-0/+14
Add IO memory emulation that uses callbacks for read/write to the allocated regions. The callbacks can be registered by the users using logic_iomem_alloc(). To use, an architecture must 'select LOGIC_IOMEM' in Kconfig and then include <asm-generic/logic_io.h> into asm/io.h to get the __raw_read*/__raw_write* functions. Optionally, an architecture may 'select LOGIC_IOMEM_FALLBACK' in which case non-emulated regions will 'fall back' to the various real_* functions that must then be provided. Cc: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-04-14lib: Add ASN.1 encoderJames Bottomley1-0/+3
We have a need in the TPM2 trusted keys to return the ASN.1 form of the TPM key blob so it can be operated on by tools outside of the kernel. The specific tools are the openssl_tpm2_engine, openconnect and the Intel tpm2-tss-engine. To do that, we have to be able to read and write the same binary key format the tools use. The current ASN.1 decoder does fine for reading, but we need pieces of an ASN.1 encoder to write the key blob in binary compatible form. For backwards compatibility, the trusted key reader code will still accept the two TPM2B quantities that it uses today, but the writer will only output the ASN.1 form. The current implementation only encodes the ASN.1 bits we actually need. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: David Howells <dhowells@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-02-26lib: stackdepot: add support to configure STACK_HASH_SIZEYogesh Lal1-0/+9
Use CONFIG_STACK_HASH_ORDER to configure STACK_HASH_SIZE. Aim is to have configurable value for STACK_HASH_SIZE, so depend on use case one can configure it. One example is of Page Owner, CONFIG_PAGE_OWNER works only if page_owner=on via kernel parameter on CONFIG_PAGE_OWNER configured system. Thus, unless admin enable it via command line option, the stackdepot will just waste 8M memory without any customer. Making it configurable and use lower value helps to enable features like CONFIG_PAGE_OWNER without any significant overhead. Link: https://lkml.kernel.org/r/1611749198-24316-1-git-send-email-vjitta@codeaurora.org Signed-off-by: Yogesh Lal <ylal@codeaurora.org> Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org> Signed-off-by: Vijayanand Jitta <vjitta@codeaurora.org> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-11Add and use a generic version of devmem_is_allowed()Palmer Dabbelt1-0/+3
As part of adding STRICT_DEVMEM support to the RISC-V port, Zong provided an implementation of devmem_is_allowed() that's exactly the same as the version in a handful of other ports. Rather than duplicate code, I've put a generic version of this in lib/ and used it for the RISC-V port. * palmer/generic-devmem: arm64: Use the generic devmem_is_allowed() arm: Use the generic devmem_is_allowed() RISC-V: Use the new generic devmem_is_allowed() lib: Add a generic version of devmem_is_allowed()
2020-12-11lib: Add a generic version of devmem_is_allowed()Palmer Dabbelt1-0/+3
As part of adding support for STRICT_DEVMEM to the RISC-V port, Zong provided a devmem_is_allowed() implementation that's exactly the same as all the others I checked. Instead I'm adding a generic version, which will soon be used. Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-10-06x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()Dan Williams1-1/+6
In reaction to a proposal to introduce a memcpy_mcsafe_fast() implementation Linus points out that memcpy_mcsafe() is poorly named relative to communicating the scope of the interface. Specifically what addresses are valid to pass as source, destination, and what faults / exceptions are handled. Of particular concern is that even though x86 might be able to handle the semantics of copy_mc_to_user() with its common copy_user_generic() implementation other archs likely need / want an explicit path for this case: On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <torvalds@linux-foundation.org> wrote: > > On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <dan.j.williams@intel.com> wrote: > > > > However now I see that copy_user_generic() works for the wrong reason. > > It works because the exception on the source address due to poison > > looks no different than a write fault on the user address to the > > caller, it's still just a short copy. So it makes copy_to_user() work > > for the wrong reason relative to the name. > > Right. > > And it won't work that way on other architectures. On x86, we have a > generic function that can take faults on either side, and we use it > for both cases (and for the "in_user" case too), but that's an > artifact of the architecture oddity. > > In fact, it's probably wrong even on x86 - because it can hide bugs - > but writing those things is painful enough that everybody prefers > having just one function. Replace a single top-level memcpy_mcsafe() with either copy_mc_to_user(), or copy_mc_to_kernel(). Introduce an x86 copy_mc_fragile() name as the rename for the low-level x86 implementation formerly named memcpy_mcsafe(). It is used as the slow / careful backend that is supplanted by a fast copy_mc_generic() in a follow-on patch. One side-effect of this reorganization is that separating copy_mc_64.S to its own file means that perf no longer needs to track dependencies for its memcpy_64.S benchmarks. [ bp: Massage a bit. ] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: <stable@vger.kernel.org> Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com
2020-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds1-0/+4
Pull networking updates from David Miller: 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan. 2) Support UDP segmentation in code TSO code, from Eric Dumazet. 3) Allow flashing different flash images in cxgb4 driver, from Vishal Kulkarni. 4) Add drop frames counter and flow status to tc flower offloading, from Po Liu. 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni. 6) Various new indirect call avoidance, from Eric Dumazet and Brian Vazquez. 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from Yonghong Song. 8) Support querying and setting hardware address of a port function via devlink, use this in mlx5, from Parav Pandit. 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson. 10) Switch qca8k driver over to phylink, from Jonathan McDowell. 11) In bpftool, show list of processes holding BPF FD references to maps, programs, links, and btf objects. From Andrii Nakryiko. 12) Several conversions over to generic power management, from Vaibhav Gupta. 13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry Yakunin. 14) Various https url conversions, from Alexander A. Klimov. 15) Timestamping and PHC support for mscc PHY driver, from Antoine Tenart. 16) Support bpf iterating over tcp and udp sockets, from Yonghong Song. 17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov. 18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan. 19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several drivers. From Luc Van Oostenryck. 20) XDP support for xen-netfront, from Denis Kirjanov. 21) Support receive buffer autotuning in MPTCP, from Florian Westphal. 22) Support EF100 chip in sfc driver, from Edward Cree. 23) Add XDP support to mvpp2 driver, from Matteo Croce. 24) Support MPTCP in sock_diag, from Paolo Abeni. 25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic infrastructure, from Jakub Kicinski. 26) Several pci_ --> dma_ API conversions, from Christophe JAILLET. 27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel. 28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki. 29) Refactor a lot of networking socket option handling code in order to avoid set_fs() calls, from Christoph Hellwig. 30) Add rfc4884 support to icmp code, from Willem de Bruijn. 31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei. 32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin. 33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin. 34) Support TCP syncookies in MPTCP, from Flowian Westphal. 35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano Brivio. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits) net: thunderx: initialize VF's mailbox mutex before first usage usb: hso: remove bogus check for EINPROGRESS usb: hso: no complaint about kmalloc failure hso: fix bailout in error case of probe ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM selftests/net: relax cpu affinity requirement in msg_zerocopy test mptcp: be careful on subflow creation selftests: rtnetlink: make kci_test_encap() return sub-test result selftests: rtnetlink: correct the final return value for the test net: dsa: sja1105: use detected device id instead of DT one on mismatch tipc: set ub->ifindex for local ipv6 address ipv6: add ipv6_dev_find() net: openvswitch: silence suspicious RCU usage warning Revert "vxlan: fix tos value before xmit" ptp: only allow phase values lower than 1 period farsync: switch from 'pci_' to 'dma_' API wan: wanxl: switch from 'pci_' to 'dma_' API hv_netvsc: do not use VF device if link is down dpaa2-eth: Fix passing zero to 'PTR_ERR' warning net: macb: Properly handle phylink on at91sam9x ...
2020-07-31lib: Add zstd support to decompressNick Terrell1-0/+4
- Add unzstd() and the zstd decompress interface. - Add zstd support to decompress_method(). The decompress_method() and unzstd() functions are used to decompress the initramfs and the initrd. The __decompress() function is used in the preboot environment to decompress a zstd compressed kernel. The zstd decompression function allows the input and output buffers to overlap because that is used by x86 kernel decompression. Signed-off-by: Nick Terrell <terrelln@fb.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20200730190841.2071656-3-nickrterrell@gmail.com
2020-07-29Add pldmfw library for PLDM firmware updateJacob Keller1-0/+4
The pldmfw library is used to implement common logic needed to flash devices based on firmware files using the format described by the PLDM for Firmware Update standard. This library consists of logic to parse the PLDM file format from a firmware file object, as well as common logic for sending the relevant PLDM header data to the device firmware. A simple ops table is provided so that device drivers can implement device specific hardware interactions while keeping the common logic to the pldmfw library. This library will be used by the Intel ice networking driver as part of implementing device flash update via devlink. The library aims to be vendor and device agnostic. For this reason, it has been placed in lib/pldmfw, in the hopes that other devices which use the PLDM firmware file format may benefit from it in the future. However, do note that not all features defined in the PLDM standard have been implemented. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-02Merge tag 'docs-5.8' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull documentation updates from Jonathan Corbet: "A fair amount of stuff this time around, dominated by yet another massive set from Mauro toward the completion of the RST conversion. I *really* hope we are getting close to the end of this. Meanwhile, those patches reach pretty far afield to update document references around the tree; there should be no actual code changes there. There will be, alas, more of the usual trivial merge conflicts. Beyond that we have more translations, improvements to the sphinx scripting, a number of additions to the sysctl documentation, and lots of fixes" * tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits) Documentation: fixes to the maintainer-entry-profile template zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst tracing: Fix events.rst section numbering docs: acpi: fix old http link and improve document format docs: filesystems: add info about efivars content Documentation: LSM: Correct the basic LSM description mailmap: change email for Ricardo Ribalda docs: sysctl/kernel: document unaligned controls Documentation: admin-guide: update bug-hunting.rst docs: sysctl/kernel: document ngroups_max nvdimm: fixes to maintainter-entry-profile Documentation/features: Correct RISC-V kprobes support entry Documentation/features: Refresh the arch support status files Revert "docs: sysctl/kernel: document ngroups_max" docs: move locking-specific documents to locking/ docs: move digsig docs to the security book docs: move the kref doc into the core-api book docs: add IRQ documentation at the core-api book docs: debugging-via-ohci1394.txt: add it to the core-api book docs: fix references for ipmi.rst file ...
2020-06-02Merge tag 'arm64-upstream' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "A sizeable pile of arm64 updates for 5.8. Summary below, but the big two features are support for Branch Target Identification and Clang's Shadow Call stack. The latter is currently arm64-only, but the high-level parts are all in core code so it could easily be adopted by other architectures pending toolchain support Branch Target Identification (BTI): - Support for ARMv8.5-BTI in both user- and kernel-space. This allows branch targets to limit the types of branch from which they can be called and additionally prevents branching to arbitrary code, although kernel support requires a very recent toolchain. - Function annotation via SYM_FUNC_START() so that assembly functions are wrapped with the relevant "landing pad" instructions. - BPF and vDSO updates to use the new instructions. - Addition of a new HWCAP and exposure of BTI capability to userspace via ID register emulation, along with ELF loader support for the BTI feature in .note.gnu.property. - Non-critical fixes to CFI unwind annotations in the sigreturn trampoline. Shadow Call Stack (SCS): - Support for Clang's Shadow Call Stack feature, which reserves platform register x18 to point at a separate stack for each task that holds only return addresses. This protects function return control flow from buffer overruns on the main stack. - Save/restore of x18 across problematic boundaries (user-mode, hypervisor, EFI, suspend, etc). - Core support for SCS, should other architectures want to use it too. - SCS overflow checking on context-switch as part of the existing stack limit check if CONFIG_SCHED_STACK_END_CHECK=y. CPU feature detection: - Removed numerous "SANITY CHECK" errors when running on a system with mismatched AArch32 support at EL1. This is primarily a concern for KVM, which disabled support for 32-bit guests on such a system. - Addition of new ID registers and fields as the architecture has been extended. Perf and PMU drivers: - Minor fixes and cleanups to system PMU drivers. Hardware errata: - Unify KVM workarounds for VHE and nVHE configurations. - Sort vendor errata entries in Kconfig. Secure Monitor Call Calling Convention (SMCCC): - Update to the latest specification from Arm (v1.2). - Allow PSCI code to query the SMCCC version. Software Delegated Exception Interface (SDEI): - Unexport a bunch of unused symbols. - Minor fixes to handling of firmware data. Pointer authentication: - Add support for dumping the kernel PAC mask in vmcoreinfo so that the stack can be unwound by tools such as kdump. - Simplification of key initialisation during CPU bringup. BPF backend: - Improve immediate generation for logical and add/sub instructions. vDSO: - Minor fixes to the linker flags for consistency with other architectures and support for LLVM's unwinder. - Clean up logic to initialise and map the vDSO into userspace. ACPI: - Work around for an ambiguity in the IORT specification relating to the "num_ids" field. - Support _DMA method for all named components rather than only PCIe root complexes. - Minor other IORT-related fixes. Miscellaneous: - Initialise debug traps early for KGDB and fix KDB cacheflushing deadlock. - Minor tweaks to early boot state (documentation update, set TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections). - Refactoring and cleanup" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits) KVM: arm64: Move __load_guest_stage2 to kvm_mmu.h KVM: arm64: Check advertised Stage-2 page size capability arm64/cpufeature: Add get_arm64_ftr_reg_nowarn() ACPI/IORT: Remove the unused __get_pci_rid() arm64/cpuinfo: Add ID_MMFR4_EL1 into the cpuinfo_arm64 context arm64/cpufeature: Add remaining feature bits in ID_AA64PFR1 register arm64/cpufeature: Add remaining feature bits in ID_AA64PFR0 register arm64/cpufeature: Add remaining feature bits in ID_AA64ISAR0 register arm64/cpufeature: Add remaining feature bits in ID_MMFR4 register arm64/cpufeature: Add remaining feature bits in ID_PFR0 register arm64/cpufeature: Introduce ID_MMFR5 CPU register arm64/cpufeature: Introduce ID_DFR1 CPU register arm64/cpufeature: Introduce ID_PFR2 CPU register arm64/cpufeature: Make doublelock a signed feature in ID_AA64DFR0 arm64/cpufeature: Drop TraceFilt feature exposure from ID_DFR0 register arm64/cpufeature: Add explicit ftr_id_isar0[] for ID_ISAR0 register arm64: mm: Add asid_gen_match() helper firmware: smccc: Fix missing prototype warning for arm_smccc_version_init arm64: vdso: Fix CFI directives in sigreturn trampoline arm64: vdso: Don't prefix sigreturn trampoline with a BTI C instruction ...
2020-05-08lib: add linear ranges helpersMatti Vaittinen1-0/+3
Many devices have control registers which control some measurable property. Often a register contains control field so that change in this field causes linear change in the controlled property. It is not a rare case that user wants to give 'meaningful' control values and driver needs to convert them to register field values. Even more often user wants to 'see' the currently set value - again in meaningful units - and driver needs to convert the values it reads from register to these meaningful units. Examples of this include: - regulators, voltage/current configurations - power, voltage/current configurations - clk(?) NCOs and maybe others I can't think of right now. Provide a linear_range helper which can do conversion from user value to register value 'selector'. The idea here is stolen from regulator framework and patches refactoring the regulator helpers to use this are following. Current implementation does not support inversely proportional ranges but it might be useful if we could support also inversely proportional ranges? Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/59259bc475e0c800eb4bb163f02528c7c01f7b3a.1588944082.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-21docs: Add rbtree documentation to the core-apiMatthew Wilcox (Oracle)1-1/+1
This file is close enough to being in rst format that I didn't feel the need to alter it in any way. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Michel Lespinasse <walken@google.com> Link: https://lore.kernel.org/r/20200401173343.17472-1-willy@infradead.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>