summaryrefslogtreecommitdiff
path: root/lib/string_helpers.c
AgeCommit message (Collapse)AuthorFilesLines
2024-03-01lib/string_helpers: Add flags param to string_get_size()Andy Shevchenko1-13/+16
The new flags parameter allows controlling - Whether or not the units suffix is separated by a space, for compatibility with sort -h - Whether or not to append a B suffix - we're not always printing bytes. Co-developed-by: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev> Link: https://lore.kernel.org/r/20240229205345.93902-1-andriy.shevchenko@linux.intel.com Signed-off-by: Kees Cook <keescook@chromium.org>
2024-03-01fortify: Improve buffer overflow reportingKees Cook1-4/+5
Improve the reporting of buffer overflows under CONFIG_FORTIFY_SOURCE to help accelerate debugging efforts. The calculations are all just sitting in registers anyway, so pass them along to the function to be reported. For example, before: detected buffer overflow in memcpy and after: memcpy: detected buffer overflow: 4096 byte read of buffer size 1 Link: https://lore.kernel.org/r/20230407192717.636137-10-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org>
2024-03-01fortify: Provide KUnit counters for failure testingKees Cook1-0/+2
The standard C string APIs were not designed to have a failure mode; they were expected to always succeed without memory safety issues. Normally, CONFIG_FORTIFY_SOURCE will use fortify_panic() to stop processing, as truncating a read or write may provide an even worse system state. However, this creates a problem for testing under things like KUnit, which needs a way to survive failures. When building with CONFIG_KUNIT, provide a failure path for all users of fortify_panic, and track whether the failure was a read overflow or a write overflow, for KUnit tests to examine. Inspired by similar logic in the slab tests. Signed-off-by: Kees Cook <keescook@chromium.org>
2024-03-01fortify: Split reporting and avoid passing string pointerKees Cook1-3/+20
In preparation for KUnit testing and further improvements in fortify failure reporting, split out the report and encode the function and access failure (read or write overflow) into a single u8 argument. This mainly ends up saving a tiny bit of space in the data segment. For a defconfig with FORTIFY_SOURCE enabled: $ size gcc/vmlinux.before gcc/vmlinux.after text data bss dec hex filename 26132309 9760658 2195460 38088427 2452eeb gcc/vmlinux.before 26132386 9748382 2195460 38076228 244ff44 gcc/vmlinux.after Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2024-02-21string: Redefine strscpy_pad() as a macroKees Cook1-34/+0
In preparation for making strscpy_pad()'s 3rd argument optional, redefine it as a macro. This also has the benefit of allowing greater FORITFY introspection, as it couldn't see into the strscpy() nor the memset() within strscpy_pad(). Cc: Andy Shevchenko <andy@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: <linux-hardening@vger.kernel.org> Reviewed-by: Justin Stitt <justinstitt@google.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2023-09-12lib/string_helpers: string_get_size() now returns characters wroteKent Overstreet1-4/+6
printbuf now needs to know the number of characters that would have been written if the buffer was too small, like snprintf(); this changes string_get_size() to return the the return value of snprintf(). Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-08-05lib/string_helpers: Add kstrdup_and_replace() helperAndy Shevchenko1-0/+15
Duplicate a NULL-terminated string and replace all occurrences of the old character with a new one. In other words, provide functionality of kstrdup() + strreplace(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230804143910.15504-2-andriy.shevchenko@linux.intel.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-06-06lib/string_helpers: Change returned value of the strreplace()Andy Shevchenko1-4/+8
It's more useful to return the pointer to the string itself with strreplace(), so it may be used like attr->name = strreplace(name, '/', '_'); While at it, amend the kernel documentation. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230605170553.7835-3-andriy.shevchenko@linux.intel.com
2022-09-05lib/string_helpers: Introduce parse_int_array_user()Cezary Rojewski1-0/+44
Add new helper function to allow for splitting specified user string into a sequence of integers. Internally it makes use of get_options() so the returned sequence contains the integers extracted plus an additional element that begins the sequence and specifies the integers count. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220904102840.862395-2-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-05-13lib/string_helpers: fix not adding strarray to device's resource listPuyou Lu1-0/+3
Add allocated strarray to device's resource list. This is a must to automatically release strarray when the device disappears. Without this fix we have a memory leak in the few drivers which use devm_kasprintf_strarray(). Link: https://lkml.kernel.org/r/20220506044409.30066-1-puyou.lu@gmail.com Link: https://lkml.kernel.org/r/20220506073623.2679-1-puyou.lu@gmail.com Fixes: acdb89b6c87a ("lib/string_helpers: Introduce managed variant of kasprintf_strarray()") Signed-off-by: Puyou Lu <puyou.lu@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-02-14fortify: Detect struct member overflows in memcpy() at compile-timeKees Cook1-0/+6
memcpy() is dead; long live memcpy() tl;dr: In order to eliminate a large class of common buffer overflow flaws that continue to persist in the kernel, have memcpy() (under CONFIG_FORTIFY_SOURCE) perform bounds checking of the destination struct member when they have a known size. This would have caught all of the memcpy()-related buffer write overflow flaws identified in at least the last three years. Background and analysis: While stack-based buffer overflow flaws are largely mitigated by stack canaries (and similar) features, heap-based buffer overflow flaws continue to regularly appear in the kernel. Many classes of heap buffer overflows are mitigated by FORTIFY_SOURCE when using the strcpy() family of functions, but a significant number remain exposed through the memcpy() family of functions. At its core, FORTIFY_SOURCE uses the compiler's __builtin_object_size() internal[0] to determine the available size at a target address based on the compile-time known structure layout details. It operates in two modes: outer bounds (0) and inner bounds (1). In mode 0, the size of the enclosing structure is used. In mode 1, the size of the specific field is used. For example: struct object { u16 scalar1; /* 2 bytes */ char array[6]; /* 6 bytes */ u64 scalar2; /* 8 bytes */ u32 scalar3; /* 4 bytes */ u32 scalar4; /* 4 bytes */ } instance; __builtin_object_size(instance.array, 0) == 22, since the remaining size of the enclosing structure starting from "array" is 22 bytes (6 + 8 + 4 + 4). __builtin_object_size(instance.array, 1) == 6, since the remaining size of the specific field "array" is 6 bytes. The initial implementation of FORTIFY_SOURCE used mode 0 because there were many cases of both strcpy() and memcpy() functions being used to write (or read) across multiple fields in a structure. For example, it would catch this, which is writing 2 bytes beyond the end of "instance": memcpy(&instance.array, data, 25); While this didn't protect against overwriting adjacent fields in a given structure, it would at least stop overflows from reaching beyond the end of the structure into neighboring memory, and provided a meaningful mitigation of a subset of buffer overflow flaws. However, many desirable targets remain within the enclosing structure (for example function pointers). As it happened, there were very few cases of strcpy() family functions intentionally writing beyond the end of a string buffer. Once all known cases were removed from the kernel, the strcpy() family was tightened[1] to use mode 1, providing greater mitigation coverage. What remains is switching memcpy() to mode 1 as well, but making the switch is much more difficult because of how frustrating it can be to find existing "normal" uses of memcpy() that expect to write (or read) across multiple fields. The root cause of the problem is that the C language lacks a common pattern to indicate the intent of an author's use of memcpy(), and is further complicated by the available compile-time and run-time mitigation behaviors. The FORTIFY_SOURCE mitigation comes in two halves: the compile-time half, when both the buffer size _and_ the length of the copy is known, and the run-time half, when only the buffer size is known. If neither size is known, there is no bounds checking possible. At compile-time when the compiler sees that a length will always exceed a known buffer size, a warning can be deterministically emitted. For the run-time half, the length is tested against the known size of the buffer, and the overflowing operation is detected. (The performance overhead for these tests is virtually zero.) It is relatively easy to find compile-time false-positives since a warning is always generated. Fixing the false positives, however, can be very time-consuming as there are hundreds of instances. While it's possible some over-read conditions could lead to kernel memory exposures, the bulk of the risk comes from the run-time flaws where the length of a write may end up being attacker-controlled and lead to an overflow. Many of the compile-time false-positives take a form similar to this: memcpy(&instance.scalar2, data, sizeof(instance.scalar2) + sizeof(instance.scalar3)); and the run-time ones are similar, but lack a constant expression for the size of the copy: memcpy(instance.array, data, length); The former is meant to cover multiple fields (though its style has been frowned upon more recently), but has been technically legal. Both lack any expressivity in the C language about the author's _intent_ in a way that a compiler can check when the length isn't known at compile time. A comment doesn't work well because what's needed is something a compiler can directly reason about. Is a given memcpy() call expected to overflow into neighbors? Is it not? By using the new struct_group() macro, this intent can be much more easily encoded. It is not as easy to find the run-time false-positives since the code path to exercise a seemingly out-of-bounds condition that is actually expected may not be trivially reachable. Tightening the restrictions to block an operation for a false positive will either potentially create a greater flaw (if a copy is truncated by the mitigation), or destabilize the kernel (e.g. with a BUG()), making things completely useless for the end user. As a result, tightening the memcpy() restriction (when there is a reasonable level of uncertainty of the number of false positives), needs to first WARN() with no truncation. (Though any sufficiently paranoid end-user can always opt to set the panic_on_warn=1 sysctl.) Once enough development time has passed, the mitigation can be further intensified. (Note that this patch is only the compile-time checking step, which is a prerequisite to doing run-time checking, which will come in future patches.) Given the potential frustrations of weeding out all the false positives when tightening the run-time checks, it is reasonable to wonder if these changes would actually add meaningful protection. Looking at just the last three years, there are 23 identified flaws with a CVE that mention "buffer overflow", and 11 are memcpy()-related buffer overflows. (For the remaining 12: 7 are array index overflows that would be mitigated by systems built with CONFIG_UBSAN_BOUNDS=y: CVE-2019-0145, CVE-2019-14835, CVE-2019-14896, CVE-2019-14897, CVE-2019-14901, CVE-2019-17666, CVE-2021-28952. 2 are miscalculated allocation sizes which could be mitigated with memory tagging: CVE-2019-16746, CVE-2019-2181. 1 is an iovec buffer bug maybe mitigated by memory tagging: CVE-2020-10742. 1 is a type confusion bug mitigated by stack canaries: CVE-2020-10942. 1 is a string handling logic bug with no mitigation I'm aware of: CVE-2021-28972.) At my last count on an x86_64 allmodconfig build, there are 35,294 calls to memcpy(). With callers instrumented to report all places where the buffer size is known but the length remains unknown (i.e. a run-time bounds check is added), we can count how many new run-time bounds checks are added when the destination and source arguments of memcpy() are changed to use "mode 1" bounds checking: 1,276. This means for the future run-time checking, there is a worst-case upper bounds of 3.6% false positives to fix. In addition, there were around 150 new compile-time warnings to evaluate and fix (which have now been fixed). With this instrumentation it's also possible to compare the places where the known 11 memcpy() flaw overflows manifested against the resulting list of potential new run-time bounds checks, as a measure of potential efficacy of the tightened mitigation. Much to my surprise, horror, and delight, all 11 flaws would have been detected by the newly added run-time bounds checks, making this a distinctly clear mitigation improvement: 100% coverage for known memcpy() flaws, with a possible 2 orders of magnitude gain in coverage over existing but undiscovered run-time dynamic length flaws (i.e. 1265 newly covered sites in addition to the 11 known), against only <4% of all memcpy() callers maybe gaining a false positive run-time check, with only about 150 new compile-time instances needing evaluation. Specifically these would have been mitigated: CVE-2020-24490 https://git.kernel.org/linus/a2ec905d1e160a33b2e210e45ad30445ef26ce0e CVE-2020-12654 https://git.kernel.org/linus/3a9b153c5591548612c3955c9600a98150c81875 CVE-2020-12653 https://git.kernel.org/linus/b70261a288ea4d2f4ac7cd04be08a9f0f2de4f4d CVE-2019-14895 https://git.kernel.org/linus/3d94a4a8373bf5f45cf5f939e88b8354dbf2311b CVE-2019-14816 https://git.kernel.org/linus/7caac62ed598a196d6ddf8d9c121e12e082cac3a CVE-2019-14815 https://git.kernel.org/linus/7caac62ed598a196d6ddf8d9c121e12e082cac3a CVE-2019-14814 https://git.kernel.org/linus/7caac62ed598a196d6ddf8d9c121e12e082cac3a CVE-2019-10126 https://git.kernel.org/linus/69ae4f6aac1578575126319d3f55550e7e440449 CVE-2019-9500 https://git.kernel.org/linus/1b5e2423164b3670e8bc9174e4762d297990deff no-CVE-yet https://git.kernel.org/linus/130f634da1af649205f4a3dd86cbe5c126b57914 no-CVE-yet https://git.kernel.org/linus/d10a87a3535cce2b890897914f5d0d83df669c63 To accelerate the review of potential run-time false positives, it's also worth noting that it is possible to partially automate checking by examining the memcpy() buffer argument to check for the destination struct member having a neighboring array member. It is reasonable to expect that the vast majority of run-time false positives would look like the already evaluated and fixed compile-time false positives, where the most common pattern is neighboring arrays. (And, FWIW, many of the compile-time fixes were actual bugs, so it is reasonable to assume we'll have similar cases of actual bugs getting fixed for run-time checks.) Implementation: Tighten the memcpy() destination buffer size checking to use the actual ("mode 1") target buffer size as the bounds check instead of their enclosing structure's ("mode 0") size. Use a common inline for memcpy() (and memmove() in a following patch), since all the tests are the same. All new cross-field memcpy() uses must use the struct_group() macro or similar to target a specific range of fields, so that FORTIFY_SOURCE can reason about the size and safety of the copy. For now, cross-member "mode 1" _read_ detection at compile-time will be limited to W=1 builds, since it is, unfortunately, very common. As the priority is solving write overflows, read overflows will be part of a future phase (and can be fixed in parallel, for anyone wanting to look at W=1 build output). For run-time, the "mode 0" size checking and mitigation is left unchanged, with "mode 1" to be added in stages. In this patch, no new run-time checks are added. Future patches will first bounds-check writes, and only perform a WARN() for now. This way any missed run-time false positives can be flushed out over the coming several development cycles, but system builders who have tested their workloads to be WARN()-free can enable the panic_on_warn=1 sysctl to immediately gain a mitigation against this class of buffer overflows. Once that is under way, run-time bounds-checking of reads can be similarly enabled. Related classes of flaws that will remain unmitigated: - memcpy() with flexible array structures, as the compiler does not currently have visibility into the size of the trailing flexible array. These can be fixed in the future by refactoring such cases to use a new set of flexible array structure helpers to perform the common serialization/deserialization code patterns doing allocation and/or copying. - memcpy() with raw pointers (e.g. void *, char *, etc), or otherwise having their buffer size unknown at compile time, have no good mitigation beyond memory tagging (and even that would only protect against inter-object overflow, not intra-object neighboring field overflows), or refactoring. Some kind of "fat pointer" solution is likely needed to gain proper size-of-buffer awareness. (e.g. see struct membuf) - type confusion where a higher level type's allocation size does not match the resulting cast type eventually passed to a deeper memcpy() call where the compiler cannot see the true type. In theory, greater static analysis could catch these, and the use of -Warray-bounds will help find some of these. [0] https://gcc.gnu.org/onlinedocs/gcc/Object-Size-Checking.html [1] https://git.kernel.org/linus/6a39e62abbafd1d58d1722f40c7d26ef379c6a2f Signed-off-by: Kees Cook <keescook@chromium.org>
2021-11-18lib/string_helpers: Introduce managed variant of kasprintf_strarray()Andy Shevchenko1-0/+31
Some of the users want to have easy way to allocate array of strings that will be automatically cleaned when associated device is gone. Introduce managed variant of kasprintf_strarray() for such use cases. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2021-11-18lib/string_helpers: Introduce kasprintf_strarray()Andy Shevchenko1-0/+33
We have a few users already that basically want to have array of sequential strings to be allocated and filled. Provide a helper for them (basically adjusted version from gpio-mockup.c). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2021-11-03string: uninline memcpy_and_padGuenter Roeck1-0/+20
When building m68k:allmodconfig, recent versions of gcc generate the following error if the length of UTS_RELEASE is less than 8 bytes. In function 'memcpy_and_pad', inlined from 'nvmet_execute_disc_identify' at drivers/nvme/target/discovery.c:268:2: arch/m68k/include/asm/string.h:72:25: error: '__builtin_memcpy' reading 8 bytes from a region of size 7 Discussions around the problem suggest that this only happens if an architecture does not provide strlen(), if -ffreestanding is provided as compiler option, and if CONFIG_FORTIFY_SOURCE=n. All of this is the case for m68k. The exact reasons are unknown, but seem to be related to the ability of the compiler to evaluate the return value of strlen() and the resulting execution flow in memcpy_and_pad(). It would be possible to work around the problem by using sizeof(UTS_RELEASE) instead of strlen(UTS_RELEASE), but that would only postpone the problem until the function is called in a similar way. Uninline memcpy_and_pad() instead to solve the problem for good. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-25fortify: Move remaining fortify helpers into fortify-string.hKees Cook1-0/+2
When commit a28a6e860c6c ("string.h: move fortified functions definitions in a dedicated header.") moved the fortify-specific code, some helpers were left behind. Move the remaining fortify-specific helpers into fortify-string.h so they're together where they're used. This requires that any FORTIFY helper function prototypes be conditionally built to avoid "no prototype" warnings. Additionally removes unused helpers. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Daniel Axtens <dja@axtens.net> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Acked-by: Francis Laniel <laniel_francis@privacyrequired.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2021-09-25lib/string: Move helper functions out of string.cKees Cook1-0/+193
The core functions of string.c are those that may be implemented by per-architecture functions, or overloaded by FORTIFY_SOURCE. As a result, it needs to be built with __NO_FORTIFY. Without this, macros will collide with function declarations. This was accidentally working due to -ffreestanding (on some architectures). Make this deterministic by explicitly setting __NO_FORTIFY and move all the helper functions into string_helpers.c so that they gain the fortification coverage they had been missing. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Andy Lavr <andy.lavr@gmail.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2021-07-19string_helpers: Escape double quotes in escape_specialChris Down1-0/+4
From an abstract point of view, escape_special's counterpart, unescape_special, already handles the unescaping of blackslashed double quote sequences. As a more practical example, printk indexing is an example case where this is already practically useful. Compare an example with `ESCAPE_SPECIAL | ESCAPE_SPACE`, with quotes not escaped: [root@ktst ~]# grep drivers/pci/pci-stub.c:69 /sys/kernel/debug/printk/index/vmlinux <4> drivers/pci/pci-stub.c:69 pci_stub_init "pci-stub: invalid ID string "%s"\n" ...and the same after this patch: [root@ktst ~]# grep drivers/pci/pci-stub.c:69 /sys/kernel/debug/printk/index/vmlinux <4> drivers/pci/pci-stub.c:69 pci_stub_init "pci-stub: invalid ID string \"%s\"\n" One can of course, alternatively, use ESCAPE_APPEND with a quote in @only, but without this patch quotes are coerced into hex or octal which can hurt readability quite significantly. I've checked uses of ESCAPE_SPECIAL and %pE across the codebase, and I'm pretty confident that this shouldn't affect any stable interfaces. Signed-off-by: Chris Down <chris@chrisdown.name> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/af144c5b75e41ce417386253ba2694456bc04118.1623775748.git.chris@chrisdown.name
2021-07-01seq_file: drop unused *_escape_mem_ascii()Andy Shevchenko1-19/+0
There are no more users of the seq_escape_mem_ascii() followed by string_escape_mem_ascii(). Remove them for good. Link: https://lkml.kernel.org/r/20210504180819.73127-16-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01lib/string_helpers: allow to append additional characters to be escapedAndy Shevchenko1-4/+15
Introduce a new flag to append additional characters, passed in 'only' parameter, to be escaped if they fall in the corresponding class. Link: https://lkml.kernel.org/r/20210504180819.73127-7-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01lib/string_helpers: introduce ESCAPE_NAP to escape non-ASCII and non-printableAndy Shevchenko1-4/+16
Some users may want to have an ASCII based filter for printable only characters, provided by conjunction of isascii() and isprint() functions. Here is the addition of a such. Link: https://lkml.kernel.org/r/20210504180819.73127-6-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01lib/string_helpers: introduce ESCAPE_NA for escaping non-ASCIIAndy Shevchenko1-4/+17
Some users may want to have an ASCII based filter, provided by isascii() function. Here is the addition of a such. Link: https://lkml.kernel.org/r/20210504180819.73127-5-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01lib/string_helpers: drop indentation level in string_escape_mem()Andy Shevchenko1-18/+18
The only one conditional is left on the upper level, move the rest to the same level and drop indentation level. No functional changes. Link: https://lkml.kernel.org/r/20210504180819.73127-4-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01lib/string_helpers: move ESCAPE_NP check inside 'else' branch in a loopAndy Shevchenko1-7/+10
Refactor code to have better readability by moving ESCAPE_NP handling inside 'else' branch in the loop. No functional change intended. Link: https://lkml.kernel.org/r/20210504180819.73127-3-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-30lib: string_helpers: provide kfree_strarray()Bartosz Golaszewski1-0/+23
There's a common pattern of dynamically allocating an array of char pointers and then also dynamically allocating each string in this array. Provide a helper for freeing such a string array with one call. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-07-17lib/string_helpers: fix some kerneldoc warningsJonathan Corbet1-37/+40
Due to some sad limitations in how kerneldoc comments are parsed, the documentation in lib/string_helpers.c generates these warnings: lib/string_helpers.c:236: WARNING: Unexpected indentation. lib/string_helpers.c:241: WARNING: Block quote ends without a blank line; unexpected unindent. lib/string_helpers.c:446: WARNING: Unexpected indentation. lib/string_helpers.c:451: WARNING: Block quote ends without a blank line; unexpected unindent. lib/string_helpers.c:474: WARNING: Unexpected indentation. Rework the comments to obtain something like the desired result. Link: http://lkml.kernel.org/r/20190607110952.409011ba@lwn.net Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-04nfsd: escape high characters in binary dataJ. Bruce Fields1-0/+19
I'm exposing some information about NFS clients in pseudofiles. I expect to eventually have simple tools to help read those pseudofiles. But it's also helpful if the raw files are human-readable to the extent possible. It aids debugging and makes them usable on systems that don't have the latest nfs-utils. A minor challenge there is opaque client-generated protocol objects like state owners and client identifiers. Some clients generate those to include handy information in plain ascii. But they may also include arbitrary byte sequences. I think the simplest approach is to limit to isprint(c) && isascii(c) and escape everything else. That means you can just cat the file and get something that looks OK. Also, I'm trying to keep these files legal YAML, which requires them to UTF-8, and this is a simple way to guarantee that. Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner1-0/+1
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-14mm: treewide: remove GFP_TEMPORARY allocation flagMichal Hocko1-2/+2
GFP_TEMPORARY was introduced by commit e12ba74d8ff3 ("Group short-lived and reclaimable kernel allocations") along with __GFP_RECLAIMABLE. It's primary motivation was to allow users to tell that an allocation is short lived and so the allocator can try to place such allocations close together and prevent long term fragmentation. As much as this sounds like a reasonable semantic it becomes much less clear when to use the highlevel GFP_TEMPORARY allocation flag. How long is temporary? Can the context holding that memory sleep? Can it take locks? It seems there is no good answer for those questions. The current implementation of GFP_TEMPORARY is basically GFP_KERNEL | __GFP_RECLAIMABLE which in itself is tricky because basically none of the existing caller provide a way to reclaim the allocated memory. So this is rather misleading and hard to evaluate for any benefits. I have checked some random users and none of them has added the flag with a specific justification. I suspect most of them just copied from other existing users and others just thought it might be a good idea to use without any measuring. This suggests that GFP_TEMPORARY just motivates for cargo cult usage without any reasoning. I believe that our gfp flags are quite complex already and especially those with highlevel semantic should be clearly defined to prevent from confusion and abuse. Therefore I propose dropping GFP_TEMPORARY and replace all existing users to simply use GFP_KERNEL. Please note that SLAB users with shrinkers will still get __GFP_RECLAIMABLE heuristic and so they will be placed properly for memory fragmentation prevention. I can see reasons we might want some gfp flag to reflect shorterm allocations but I propose starting from a clear semantic definition and only then add users with proper justification. This was been brought up before LSF this year by Matthew [1] and it turned out that GFP_TEMPORARY really doesn't have a clear semantic. It seems to be a heuristic without any measured advantage for most (if not all) its current users. The follow up discussion has revealed that opinions on what might be temporary allocation differ a lot between developers. So rather than trying to tweak existing users into a semantic which they haven't expected I propose to simply remove the flag and start from scratch if we really need a semantic for short term allocations. [1] http://lkml.kernel.org/r/20170118054945.GD18349@bombadil.infradead.org [akpm@linux-foundation.org: fix typo] [akpm@linux-foundation.org: coding-style fixes] [sfr@canb.auug.org.au: drm/i915: fix up] Link: http://lkml.kernel.org/r/20170816144703.378d4f4d@canb.auug.org.au Link: http://lkml.kernel.org/r/20170728091904.14627-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Neil Brown <neilb@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-21string_helpers: add kstrdup_quotable_fileKees Cook1-0/+30
Allocate a NULL-terminated file path with special characters escaped, safe for logging. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: James Morris <james.l.morris@oracle.com>
2016-04-21string_helpers: add kstrdup_quotable_cmdlineKees Cook1-0/+34
Provide an escaped (but readable: no inter-argument NULLs) commandline safe for logging. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: James Morris <james.l.morris@oracle.com>
2016-04-21string_helpers: add kstrdup_quotableKees Cook1-0/+28
Handle allocating and escaping a string safe for logging. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: James Morris <james.l.morris@oracle.com>
2016-01-21string_helpers: fix precision loss for some inputsJames Bottomley1-20/+43
It was noticed that we lose precision in the final calculation for some inputs. The most egregious example is size=3000 blk_size=1900 in units of 10 should yield 5.70 MB but in fact yields 3.00 MB (oops). This is because the current algorithm doesn't correctly account for all the remainders in the logarithms. Fix this by doing a correct calculation in the remainders based on napier's algorithm. Additionally, now we have the correct result, we have to account for arithmetic rounding because we're printing 3 digits of precision. This means that if the fourth digit is five or greater, we have to round up, so add a section to ensure correct rounding. Finally account for all possible inputs correctly, including zero for block size. Fixes: b9f28d863594c429e1df35a0474d2663ca28b307 Signed-off-by: James Bottomley <JBottomley@Odin.com> Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: <stable@vger.kernel.org> [delay until after 4.4 release] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-18lib/string_helpers.c: fix infinite loop in string_get_size()Vitaly Kuznetsov1-1/+5
Some string_get_size() calls (e.g.: string_get_size(1, 512, STRING_UNITS_10, ..., ...) string_get_size(15, 64, STRING_UNITS_10, ..., ...) ) result in an infinite loop. The problem is that if size is equal to divisor[units]/blk_size and is smaller than divisor[units] we'll end up with size == 0 when we start doing sf_cap calculations: For string_get_size(1, 512, STRING_UNITS_10, ..., ...) case: ... remainder = do_div(size, divisor[units]); -> size is 0, remainder is 1 remainder *= blk_size; -> remainder is 512 ... size *= blk_size; -> size is still 0 size += remainder / divisor[units]; -> size is still 0 The caller causing the issue is sd_read_capacity(), the problem was noticed on Hyper-V, such weird size was reported by host when scanning collides with device removal. This is probably a separate issue worth fixing, this patch is intended to prevent the library routine from infinite looping. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: James Bottomley <JBottomley@Odin.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10lib/string_helpers: rename "esc" arg to "only"Kees Cook1-7/+7
To further clarify the purpose of the "esc" argument, rename it to "only" to reflect that it is a limit, not a list of additional characters to escape. Signed-off-by: Kees Cook <keescook@chromium.org> Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10lib/string_helpers: clarify esc arg in string_escape_memKees Cook1-4/+6
The esc argument is used to reduce which characters will be escaped. For example, using " " with ESCAPE_SPACE will not produce any escaped spaces. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Mathias Krause <minipli@googlemail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-20/+48
Pull SCSI updates from James Bottomley: "This is the usual grab bag of driver updates (lpfc, qla2xxx, storvsc, aacraid, ipr) plus an assortment of minor updates. There's also a major update to aic1542 which moves the driver into this millenium" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (106 commits) change SCSI Maintainer email sd, mmc, virtio_blk, string_helpers: fix block size units ufs: add support to allow non standard behaviours (quirks) ufs-qcom: save controller revision info in internal structure qla2xxx: Update driver version to 8.07.00.18-k qla2xxx: Restore physical port WWPN only, when port down detected for FA-WWPN port. qla2xxx: Fix virtual port configuration, when switch port is disabled/enabled. qla2xxx: Prevent multiple firmware dump collection for ISP27XX. qla2xxx: Disable Interrupt handshake for ISP27XX. qla2xxx: Add debugging info for MBX timeout. qla2xxx: Add serdes read/write support for ISP27XX qla2xxx: Add udev notification to save fw dump for ISP27XX qla2xxx: Add message for sucessful FW dump collected for ISP27XX. qla2xxx: Add support to load firmware from file for ISP 26XX/27XX. qla2xxx: Fix beacon blink for ISP27XX. qla2xxx: Increase the wait time for firmware to be ready for P3P. qla2xxx: Fix crash due to wrong casting of reg for ISP27XX. qla2xxx: Fix warnings reported by static checker. lpfc: Update version to 10.5.0.0 for upstream patch set lpfc: Update copyright to 2015 ...
2015-04-16lib/string_helpers.c: change semantics of string_escape_memRasmus Villemoes1-42/+7
The current semantics of string_escape_mem are inadequate for one of its current users, vsnprintf(). If that is to honour its contract, it must know how much space would be needed for the entire escaped buffer, and string_escape_mem provides no way of obtaining that (short of allocating a large enough buffer (~4 times input string) to let it play with, and that's definitely a big no-no inside vsnprintf). So change the semantics for string_escape_mem to be more snprintf-like: Return the size of the output that would be generated if the destination buffer was big enough, but of course still only write to the part of dst it is allowed to, and (contrary to snprintf) don't do '\0'-termination. It is then up to the caller to detect whether output was truncated and to append a '\0' if desired. Also, we must output partial escape sequences, otherwise a call such as snprintf(buf, 3, "%1pE", "\123") would cause printf to write a \0 to buf[2] but leaving buf[0] and buf[1] with whatever they previously contained. This also fixes a bug in the escaped_string() helper function, which used to unconditionally pass a length of "end-buf" to string_escape_mem(); since the latter doesn't check osz for being insanely large, it would happily write to dst. For example, kasprintf(GFP_KERNEL, "something and then %pE", ...); is an easy way to trigger an oops. In test-string_helpers.c, the -ENOMEM test is replaced with testing for getting the expected return value even if the buffer is too small. We also ensure that nothing is written (by relying on a NULL pointer deref) if the output size is 0 by passing NULL - this has to work for kasprintf("%pE") to work. In net/sunrpc/cache.c, I think qword_add still has the same semantics. Someone should definitely double-check this. In fs/proc/array.c, I made the minimum possible change, but longer-term it should stop poking around in seq_file internals. [andriy.shevchenko@linux.intel.com: simplify qword_add] [andriy.shevchenko@linux.intel.com: add missed curly braces] Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-16lib/string_helpers.c: refactor string_escape_memRasmus Villemoes1-103/+105
When printf is given the format specifier %pE, it needs a way of obtaining the total output size that would be generated if the buffer was large enough, and string_escape_mem doesn't easily provide that. This is a refactorization of string_escape_mem in preparation of changing its external API to provide that information. The somewhat ugly early returns and subsequent seemingly redundant conditionals are to make the following patch touch as little as possible in string_helpers.c while still preserving the current behaviour of never outputting partial escape sequences. That behaviour must also change for %pE to work as one expects from every other printf specifier. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-11sd, mmc, virtio_blk, string_helpers: fix block size unitsJames Bottomley1-20/+48
The current string_get_size() overflows when the device size goes over 2^64 bytes because the string helper routine computes the suffix from the size in bytes. However, the entirety of Linux thinks in terms of blocks, not bytes, so this will artificially induce an overflow on very large devices. Fix this by making the function string_get_size() take blocks and the block size instead of bytes. This should allow us to keep working until the current SCSI standard overflows. Also fix virtio_blk and mmc (both of which were also artificially multiplying by the block size to pass a byte side to string_get_size()). The mathematics of this is pretty simple: we're taking a product of size in blocks (S) and block size (B) and trying to re-express this in exponential form: S*B = R*N^E (where N, the exponent is either 1000 or 1024) and R < N. Mathematically, S = RS*N^ES and B=RB*N^EB, so if RS*RB < N it's easy to see that S*B = RS*RB*N^(ES+EB). However, if RS*BS > N, we can see that this can be re-expressed as RS*BS = R*N (where R = RS*BS/N < N) so the whole exponent becomes R*N^(ES+EB+1) [jejb: fix incorrect 32 bit do_div spotted by kbuild test robot <fengguang.wu@intel.com>] Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-02-13libstring_helpers.c:string_get_size(): return voidRasmus Villemoes1-6/+4
string_get_size() was documented to return an error, but in fact always returned 0. Since the output always fits in 9 bytes, just document that and let callers do what they do now: pass a small stack buffer and ignore the return value. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13lib/string_helpers.c:string_get_size(): use 32 bit arithmetic when possibleRasmus Villemoes1-5/+4
The remainder from do_div is always a u32, and after size has been reduced to be below 1000 (or 1024), it certainly fits in u32. So both remainder and sf_cap can be made u32s, the format specifiers can be simplified (%lld wasn't the right thing to use for _unsigned_ long long anyway), and we can replace a do_div with an ordinary 32/32 bit division. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13lib/string_helpers.c:string_get_size(): remove redundant prefixesRasmus Villemoes1-4/+3
While commit 3c9f3681d0b4 ("[SCSI] lib: add generic helper to print sizes rounded to the correct SI range") says that Z and Y are included in preparation for 128 bit computers, they just waste .text currently. If and when we get u128, string_get_size needs updating anyway (and ISO needs to come up with four more prefixes). Also there's no need to include and test for the NULL sentinel; once we reach "E" size is at most 18. [The test is also wrong; it should be units_str[units][i+1]; if we've reached NULL we're already doomed.] Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14lib / string_helpers: introduce string_escape_mem()Andy Shevchenko1-0/+274
This is almost the opposite function to string_unescape(). Nevertheless it handles \0 and could be used for any byte buffer. The documentation is supplied together with the function prototype. The test cases covers most of the scenarios and would be expanded later on. [akpm@linux-foundation.org: avoid 1k stack consumption] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: "John W . Linville" <linville@tuxdriver.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joe Perches <joe@perches.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14lib / string_helpers: move documentation to c-fileAndy Shevchenko1-0/+38
The introduced function string_escape_mem() is a kind of opposite to string_unescape. We have several users of such functionality each of them created custom implementation. The series contains clean up of test suite, adding new call, and switching few users to use it via %*pE specifier. Test suite covers all of existing and most of potential use cases. This patch (of 11): The documentation of API belongs to c-file. This patch moves it accordingly. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: "John W . Linville" <linville@tuxdriver.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07lib/string_helpers.c: constify static arraysMathias Krause1-6/+9
Complement commit 68aecfb97978 ("lib/string_helpers.c: make arrays static") by making the arrays const -- not only pointing to const strings. This moves them out of the data section to the r/o data section: text data bss dec hex filename 1150 176 0 1326 52e lib/string_helpers.old.o 1326 0 0 1326 52e lib/string_helpers.new.o Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-01lib/string_helpers: introduce generic string_unescapeAndy Shevchenko1-0/+133
There are several places in kernel where modules unescapes input to convert C-Style Escape Sequences into byte codes. The patch provides generic implementation of such approach. Test cases are also included into the patch. [akpm@linux-foundation.org: clarify comment] [akpm@linux-foundation.org: export get_random_int() to modules] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: William Hubbs <w.d.hubbs@gmail.com> Cc: Chris Brannon <chris@the-brannons.com> Cc: Kirk Reiser <kirk@braille.uwo.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30lib/string_helpers.c: make arrays staticAndrew Morton1-4/+4
Moving these arrays into static storage shrinks the kernel a bit: text data bss dec hex filename 723 112 64 899 383 lib/string_helpers.o 516 272 64 852 354 lib/string_helpers.o Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-08lib: reduce the use of module.h wherever possiblePaul Gortmaker1-1/+1
For files only using THIS_MODULE and/or EXPORT_SYMBOL, map them onto including export.h -- or if the file isn't even using those, then just delete the include. Fix up any implicit include dependencies that were being masked by module.h along the way. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2008-10-23[SCSI] lib: string_get_size(): don't hang on zero; no decimals on exactH. Peter Anvin1-15/+19
We would hang forever when passing a zero to string_get_size(). Furthermore, string_get_size() would produce decimals on a value small enough to be exact. Finally, a few formatting issues are inconsistent with standard SI style guidelines. - If the value is less than the divisor, skip the entire rounding step. This prints out all small values including zero as integers, without decimals. - Add a space between the value and the symbol for the unit, consistent with standard SI practice. - Lower case k in kB since we are talking about powers of 10. - Finally, change "int" to "unsigned int" in one place to shut up a gcc warning when compiling the code out-of-kernel for testing. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-03[SCSI] lib: add generic helper to print sizes rounded to the correct SI rangeJames Bottomley1-0/+64
This patch adds the ability to print sizes in either units of 10^3 (SI) or 2^10 (Binary) units. It rounds up to three significant figures and can be used for either memory or storage capacities. Oh, and I'm fully aware that 64 bits is only 16EiB ... the Zetta and Yotta units are added for future proofing against the day we have 128 bit computers ... [fujita.tomonori@lab.ntt.co.jp: fix missed unsigned long long cast] Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>