| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 4acfe3dfde685a5a9eaec5555351918e2d7266a1 ]
Dan Carpenter spotted a race condition in a couple of situations like
these in the test_firmware driver:
static int test_dev_config_update_u8(const char *buf, size_t size, u8 *cfg)
{
u8 val;
int ret;
ret = kstrtou8(buf, 10, &val);
if (ret)
return ret;
mutex_lock(&test_fw_mutex);
*(u8 *)cfg = val;
mutex_unlock(&test_fw_mutex);
/* Always return full write size even if we didn't consume all */
return size;
}
static ssize_t config_num_requests_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int rc;
mutex_lock(&test_fw_mutex);
if (test_fw_config->reqs) {
pr_err("Must call release_all_firmware prior to changing config\n");
rc = -EINVAL;
mutex_unlock(&test_fw_mutex);
goto out;
}
mutex_unlock(&test_fw_mutex);
rc = test_dev_config_update_u8(buf, count,
&test_fw_config->num_requests);
out:
return rc;
}
static ssize_t config_read_fw_idx_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
return test_dev_config_update_u8(buf, count,
&test_fw_config->read_fw_idx);
}
The function test_dev_config_update_u8() is called from both the locked
and the unlocked context, function config_num_requests_store() and
config_read_fw_idx_store() which can both be called asynchronously as
they are driver's methods, while test_dev_config_update_u8() and siblings
change their argument pointed to by u8 *cfg or similar pointer.
To avoid deadlock on test_fw_mutex, the lock is dropped before calling
test_dev_config_update_u8() and re-acquired within test_dev_config_update_u8()
itself, but alas this creates a race condition.
Having two locks wouldn't assure a race-proof mutual exclusion.
This situation is best avoided by the introduction of a new, unlocked
function __test_dev_config_update_u8() which can be called from the locked
context and reducing test_dev_config_update_u8() to:
static int test_dev_config_update_u8(const char *buf, size_t size, u8 *cfg)
{
int ret;
mutex_lock(&test_fw_mutex);
ret = __test_dev_config_update_u8(buf, size, cfg);
mutex_unlock(&test_fw_mutex);
return ret;
}
doing the locking and calling the unlocked primitive, which enables both
locked and unlocked versions without duplication of code.
The similar approach was applied to all functions called from the locked
and the unlocked context, which safely mitigates both deadlocks and race
conditions in the driver.
__test_dev_config_update_bool(), __test_dev_config_update_u8() and
__test_dev_config_update_size_t() unlocked versions of the functions
were introduced to be called from the locked contexts as a workaround
without releasing the main driver's lock and thereof causing a race
condition.
The test_dev_config_update_bool(), test_dev_config_update_u8() and
test_dev_config_update_size_t() locked versions of the functions
are being called from driver methods without the unnecessary multiplying
of the locking and unlocking code for each method, and complicating
the code with saving of the return value across lock.
Fixes: 7feebfa487b92 ("test_firmware: add support for request_firmware_into_buf")
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russ Weight <russell.h.weight@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tianfei Zhang <tianfei.zhang@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org # v5.4
Suggested-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Link: https://lore.kernel.org/r/20230509084746.48259-1-mirsad.todorovac@alu.unizg.hr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f7d85515bd21902b218370a1a6301f76e4e636ff ]
strtobool() is the same as kstrtobool().
However, the latter is more used within the kernel.
In order to remove strtobool() and slightly simplify kstrtox.h, switch to
the other function name.
While at it, include the corresponding header file (<linux/kstrtox.h>)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/34f04735d20e0138695dd4070651bd860a36b81c.1673688120.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 4acfe3dfde68 ("test_firmware: prevent race conditions by a correct implementation of locking")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7c5d4801ecf0564c860033d89726b99723c55146 ]
irq_cpu_rmap_release() calls cpu_rmap_put(), which may free the rmap.
So we need to clear the pointer to our glue structure in rmap before
doing that, not after.
Fixes: 4e0473f1060a ("lib: cpu_rmap: Avoid use after free on rmap->obj array entries")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/ZHo0vwquhOy3FaXc@decadent.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 48e156023059e57a8fc68b498439832f7600ffff upstream.
The following kernel memory leak was noticed after running
tools/testing/selftests/firmware/fw_run_tests.sh:
[root@pc-mtodorov firmware]# cat /sys/kernel/debug/kmemleak
.
.
.
unreferenced object 0xffff955389bc3400 (size 1024):
comm "test_firmware-0", pid 5451, jiffies 4294944822 (age 65.652s)
hex dump (first 32 bytes):
47 48 34 35 36 37 0a 00 00 00 00 00 00 00 00 00 GH4567..........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff962f5dec>] slab_post_alloc_hook+0x8c/0x3c0
[<ffffffff962fcca4>] __kmem_cache_alloc_node+0x184/0x240
[<ffffffff962704de>] kmalloc_trace+0x2e/0xc0
[<ffffffff9665b42d>] test_fw_run_batch_request+0x9d/0x180
[<ffffffff95fd813b>] kthread+0x10b/0x140
[<ffffffff95e033e9>] ret_from_fork+0x29/0x50
unreferenced object 0xffff9553c334b400 (size 1024):
comm "test_firmware-1", pid 5452, jiffies 4294944822 (age 65.652s)
hex dump (first 32 bytes):
47 48 34 35 36 37 0a 00 00 00 00 00 00 00 00 00 GH4567..........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff962f5dec>] slab_post_alloc_hook+0x8c/0x3c0
[<ffffffff962fcca4>] __kmem_cache_alloc_node+0x184/0x240
[<ffffffff962704de>] kmalloc_trace+0x2e/0xc0
[<ffffffff9665b42d>] test_fw_run_batch_request+0x9d/0x180
[<ffffffff95fd813b>] kthread+0x10b/0x140
[<ffffffff95e033e9>] ret_from_fork+0x29/0x50
unreferenced object 0xffff9553c334f000 (size 1024):
comm "test_firmware-2", pid 5453, jiffies 4294944822 (age 65.652s)
hex dump (first 32 bytes):
47 48 34 35 36 37 0a 00 00 00 00 00 00 00 00 00 GH4567..........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff962f5dec>] slab_post_alloc_hook+0x8c/0x3c0
[<ffffffff962fcca4>] __kmem_cache_alloc_node+0x184/0x240
[<ffffffff962704de>] kmalloc_trace+0x2e/0xc0
[<ffffffff9665b42d>] test_fw_run_batch_request+0x9d/0x180
[<ffffffff95fd813b>] kthread+0x10b/0x140
[<ffffffff95e033e9>] ret_from_fork+0x29/0x50
unreferenced object 0xffff9553c3348400 (size 1024):
comm "test_firmware-3", pid 5454, jiffies 4294944822 (age 65.652s)
hex dump (first 32 bytes):
47 48 34 35 36 37 0a 00 00 00 00 00 00 00 00 00 GH4567..........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff962f5dec>] slab_post_alloc_hook+0x8c/0x3c0
[<ffffffff962fcca4>] __kmem_cache_alloc_node+0x184/0x240
[<ffffffff962704de>] kmalloc_trace+0x2e/0xc0
[<ffffffff9665b42d>] test_fw_run_batch_request+0x9d/0x180
[<ffffffff95fd813b>] kthread+0x10b/0x140
[<ffffffff95e033e9>] ret_from_fork+0x29/0x50
[root@pc-mtodorov firmware]#
Note that the size 1024 corresponds to the size of the test firmware
buffer. The actual number of the buffers leaked is around 70-110,
depending on the test run.
The cause of the leak is the following:
request_partial_firmware_into_buf() and request_firmware_into_buf()
provided firmware buffer isn't released on release_firmware(), we
have allocated it and we are responsible for deallocating it manually.
This is introduced in a number of context where previously only
release_firmware() was called, which was insufficient.
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Fixes: 7feebfa487b92 ("test_firmware: add support for request_firmware_into_buf")
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Russ Weight <russell.h.weight@intel.com>
Cc: Tianfei zhang <tianfei.zhang@intel.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Zhengchao Shao <shaozhengchao@huawei.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org # v5.4
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Link: https://lore.kernel.org/r/20230509084746.48259-3-mirsad.todorovac@alu.unizg.hr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit be37bed754ed90b2655382f93f9724b3c1aae847 upstream.
Dan Carpenter spotted that test_fw_config->reqs will be leaked if
trigger_batched_requests_store() is called two or more times.
The same appears with trigger_batched_requests_async_store().
This bug wasn't trigger by the tests, but observed by Dan's visual
inspection of the code.
The recommended workaround was to return -EBUSY if test_fw_config->reqs
is already allocated.
Fixes: 7feebfa487b92 ("test_firmware: add support for request_firmware_into_buf")
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russ Weight <russell.h.weight@intel.com>
Cc: Tianfei Zhang <tianfei.zhang@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org # v5.4
Suggested-by: Dan Carpenter <error27@gmail.com>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20230509084746.48259-2-mirsad.todorovac@alu.unizg.hr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eb799279fb1f9c63c520fe8c1c41cb9154252db6 upstream.
syzbot is reporting a lockdep warning in fill_pool() because the allocation
from debugobjects is using GFP_ATOMIC, which is (__GFP_HIGH | __GFP_KSWAPD_RECLAIM)
and therefore tries to wake up kswapd, which acquires kswapd_wait::lock.
Since fill_pool() might be called with arbitrary locks held, fill_pool()
should not assume that acquiring kswapd_wait::lock is safe.
Use __GFP_HIGH instead and remove __GFP_NORETRY as it is pointless for
!__GFP_DIRECT_RECLAIM allocation.
Fixes: 3ac7fe5a4aab ("infrastructure to debug (dynamic) objects")
Reported-by: syzbot <syzbot+fe0c72f0ccbb93786380@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/6577e1fa-b6ee-f2be-2414-a2b51b1c5e30@I-love.SAKURA.ne.jp
Closes: https://syzkaller.appspot.com/bug?extid=fe0c72f0ccbb93786380
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0257d9908d38c0b1669af4bb1bc4dbca1f273fe6 upstream.
Make mas->min and mas->max point to a node range instead of a leaf entry
range. This allows mas to still be usable after mas_empty_area() returns.
Users would get unexpected results from other operations on the maple
state after calling the affected function.
For example, x86 MAP_32BIT mmap() acts as if there is no suitable gap when
there should be one.
Link: https://lkml.kernel.org/r/20230505145829.74574-1-zhangpeng.00@bytedance.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reported-by: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com>
Reported-by: Tad <support@spotco.us>
Reported-by: Michael Keyes <mgkeyes@vigovproductions.net>
Link: https://lore.kernel.org/linux-mm/32f156ba80010fd97dbaf0a0cdfc84366608624d.camel@intel.com/
Link: https://lore.kernel.org/linux-mm/e6108286ac025c268964a7ead3aab9899f9bc6e9.camel@spotco.us/
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Tested-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4e0473f1060aa49621d40a113afde24818101d37 ]
When calling irq_set_affinity_notifier() with NULL at the notify
argument, it will cause freeing of the glue pointer in the
corresponding array entry but will leave the pointer in the array. A
subsequent call to free_irq_cpu_rmap() will try to free this entry again
leading to possible use after free.
Fix that by setting NULL to the array entry and checking that we have
non-zero at the array entry when iterating over the array in
free_irq_cpu_rmap().
The current code does not suffer from this since there are no cases
where irq_set_affinity_notifier(irq, NULL) (note the NULL passed for the
notify arg) is called, followed by a call to free_irq_cpu_rmap() so we
don't hit and issue. Subsequent patches in this series excersize this
flow, hence the required fix.
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 162bd18eb55adf464a0fa2b4144b8d61c75ff7c2 ]
Add return value for dim_calc_stats. This is an indication for the
caller if curr_stats was assigned by the function. Avoid using
curr_stats uninitialized over {rdma/net}_dim, when no time delta between
samples. Coverity reported this potential use of an uninitialized
variable.
Fixes: 4c4dbb4a7363 ("net/mlx5e: Move dynamic interrupt coalescing code to include/linux")
Fixes: cb3c7fd4f839 ("net/mlx5e: Support adaptive RX coalescing")
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://lore.kernel.org/r/20230507135743.138993-1-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 0af462f19e635ad522f28981238334620881badc upstream.
The recent fix to ensure atomicity of lookup and allocation inadvertently
broke the pool refill mechanism.
Prior to that change debug_objects_activate() and debug_objecs_assert_init()
invoked debug_objecs_init() to set up the tracking object for statically
initialized objects. That's not longer the case and debug_objecs_init() is
now the only place which does pool refills.
Depending on the number of statically initialized objects this can be
enough to actually deplete the pool, which was observed by Ido via a
debugobjects OOM warning.
Restore the old behaviour by adding explicit refill opportunities to
debug_objects_activate() and debug_objecs_assert_init().
Fixes: 63a759694eed ("debugobject: Prevent init race with static objects")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/871qk05a9d.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 63a759694eed61025713b3e14dd827c8548daadc ]
Statically initialized objects are usually not initialized via the init()
function of the subsystem. They are special cased and the subsystem
provides a function to validate whether an object which is not yet tracked
by debugobjects is statically initialized. This means the object is started
to be tracked on first use, e.g. activation.
This works perfectly fine, unless there are two concurrent operations on
that object. Schspa decoded the problem:
T0 T1
debug_object_assert_init(addr)
lock_hash_bucket()
obj = lookup_object(addr);
if (!obj) {
unlock_hash_bucket();
- > preemption
lock_subsytem_object(addr);
activate_object(addr)
lock_hash_bucket();
obj = lookup_object(addr);
if (!obj) {
unlock_hash_bucket();
if (is_static_object(addr))
init_and_track(addr);
lock_hash_bucket();
obj = lookup_object(addr);
obj->state = ACTIVATED;
unlock_hash_bucket();
subsys function modifies content of addr,
so static object detection does
not longer work.
unlock_subsytem_object(addr);
if (is_static_object(addr)) <- Fails
debugobject emits a warning and invokes the fixup function which
reinitializes the already active object in the worst case.
This race exists forever, but was never observed until mod_timer() got a
debug_object_assert_init() added which is outside of the timer base lock
held section right at the beginning of the function to cover the lockless
early exit points too.
Rework the code so that the lookup, the static object check and the
tracking object association happens atomically under the hash bucket
lock. This prevents the issue completely as all callers are serialized on
the hash bucket lock and therefore cannot observe inconsistent state.
Fixes: 3ac7fe5a4aab ("infrastructure to debug (dynamic) objects")
Reported-by: syzbot+5093ba19745994288b53@syzkaller.appspotmail.com
Debugged-by: Schspa Shi <schspa@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://syzkaller.appspot.com/bug?id=22c8a5938eab640d1c6bcc0e3dc7be519d878462
Link: https://lore.kernel.org/lkml/20230303161906.831686-1-schspa@gmail.com
Link: https://lore.kernel.org/r/87zg7dzgao.ffs@tglx
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f9a301c3317daa921375da0aec82462ddf019928 ]
Fix bug in debugfs logs that causes an incorrect order of lines in the
debugfs log.
Currently, the test counts lines that show the number of tests passed,
failed, and skipped, as well as any suite diagnostic lines,
appear prior to the individual results, which is a bug.
Ensure the order of printing for the debugfs log is correct. Additionally,
add a KTAP header to so the debugfs logs can be valid KTAP.
This is an example of a log prior to these fixes:
KTAP version 1
# Subtest: kunit_status
1..2
# kunit_status: pass:2 fail:0 skip:0 total:2
# Totals: pass:2 fail:0 skip:0 total:2
ok 1 kunit_status_set_failure_test
ok 2 kunit_status_mark_skipped_test
ok 1 kunit_status
Note the two lines with stats are out of order. This is the same debugfs
log after the fixes (in combination with the third patch to remove the
extra line):
KTAP version 1
1..1
KTAP version 1
# Subtest: kunit_status
1..2
ok 1 kunit_status_set_failure_test
ok 2 kunit_status_mark_skipped_test
# kunit_status: pass:2 fail:0 skip:0 total:2
# Totals: pass:2 fail:0 skip:0 total:2
ok 1 kunit_status
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6c738b52316c58ae8a87abf0907f87a7b5e7a109 ]
Change KUnit test output to better comply with KTAP v1 specifications
found here: https://kernel.org/doc/html/latest/dev-tools/ktap.html.
1) Use "KTAP version 1" instead of "TAP version 14" as test output header
2) Remove '-' between test number and test name on test result lines
2) Add KTAP version lines to each subtest header as well
Note that the new KUnit output still includes the “# Subtest” line now
located after the KTAP version line. This does not completely match the
KTAP v1 spec but since it is classified as a diagnostic line, it is not
expected to be disruptive or break any existing parsers. This
“# Subtest” line comes from the TAP 14 spec
(https://testanything.org/tap-version-14-specification.html) and it is
used to define the test name before the results.
Original output:
TAP version 14
1..1
# Subtest: kunit-test-suite
1..3
ok 1 - kunit_test_1
ok 2 - kunit_test_2
ok 3 - kunit_test_3
# kunit-test-suite: pass:3 fail:0 skip:0 total:3
# Totals: pass:3 fail:0 skip:0 total:3
ok 1 - kunit-test-suite
New output:
KTAP version 1
1..1
KTAP version 1
# Subtest: kunit-test-suite
1..3
ok 1 kunit_test_1
ok 2 kunit_test_2
ok 3 kunit_test_3
# kunit-test-suite: pass:3 fail:0 skip:0 total:3
# Totals: pass:3 fail:0 skip:0 total:3
ok 1 kunit-test-suite
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of: f9a301c3317d ("kunit: fix bug in the order of lines in debugfs logs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 1f5f12ece722aacea1769fb644f27790ede339dc upstream.
In mas_alloc_nodes(), "node->node_count = 0" means to initialize the
node_count field of the new node, but the node may not be a new node. It
may be a node that existed before and node_count has a value, setting it
to 0 will cause a memory leak. At this time, mas->alloc->total will be
greater than the actual number of nodes in the linked list, which may
cause many other errors. For example, out-of-bounds access in
mas_pop_node(), and mas_pop_node() may return addresses that should not be
used. Fix it by initializing node_count only for new nodes.
Also, by the way, an if-else statement was removed to simplify the code.
Link: https://lkml.kernel.org/r/20230411041005.26205-1-zhangpeng.00@bytedance.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 06e8fd999334bcd76b4d72d7b9206d4aea89764e upstream.
The internal function of mas_awalk() was incorrectly skipping the last
entry in a node, which could potentially be NULL. This is only a problem
for the left-most node in the tree - otherwise that NULL would not exist.
Fix mas_awalk() by using the metadata to obtain the end of the node for
the loop and the logical pivot as apposed to the raw pivot value.
Link: https://lkml.kernel.org/r/20230414145728.4067069-2-Liam.Howlett@oracle.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fad8e4291da5e3243e086622df63cb952db444d8 upstream.
Stop using maple state min/max for the range by passing through pointers
for those values. This will allow the maple state to be reused without
resetting.
Also add some logic to fail out early on searching with invalid
arguments.
Link: https://lkml.kernel.org/r/20230414145728.4067069-1-Liam.Howlett@oracle.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c13af03de46ba27674dd9fb31a17c0d480081139 ]
During the development of the maple tree, the strategy of freeing multiple
nodes changed and, in the process, the pivots were reused to store
pointers to dead nodes. To ensure the readers see accurate pivots, the
writers need to mark the nodes as dead and call smp_wmb() to ensure any
readers can identify the node as dead before using the pivot values.
There were two places where the old method of marking the node as dead
without smp_wmb() were being used, which resulted in RCU readers seeing
the wrong pivot value before seeing the node was dead. Fix this race
condition by using mte_set_node_dead() which has the smp_wmb() call to
ensure the race is closed.
Add a WARN_ON() to the ma_free_rcu() call to ensure all nodes being freed
are marked as dead to ensure there are no other call paths besides the two
updated paths.
This is necessary for the RCU mode of the maple tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-6-surenb@google.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 790e1fa86b340c2bd4a327e01c161f7a1ad885f6 upstream.
Dereferencing RCU objects within the RCU callback without the RCU check
has caused lockdep to complain. Fix the RCU dereferencing by using the
RCU callback lock to ensure the operation is safe.
Also stop creating a new lock to use for dereferencing during destruction
of the tree or subtree. Instead, pass through a pointer to the tree that
has the lock that is held for RCU dereferencing checking. It also does
not make sense to use the maple state in the freeing scenario as the tree
walk is a special case where the tree no longer has the normal encodings
and parent pointers.
Link: https://lkml.kernel.org/r/20230227173632.3292573-8-surenb@google.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Cc: stable@vger.kernel.org
Reported-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0a2b18d948838e16912b3b627b504ab062b7d02a upstream.
Add an smp_rmb() before reading the parent pointer to ensure that anything
read from the node prior to the parent pointer hasn't been reordered ahead
of this check.
The is necessary for RCU mode.
Link: https://lkml.kernel.org/r/20230227173632.3292573-7-surenb@google.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Cc: stable@vger.kernel.org
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8372f4d83f96f35915106093cde4565836587123 upstream.
The call to mte_set_dead_node() before the smp_wmb() already calls
smp_wmb() so this is not needed. This is an optimization for the RCU mode
of the maple tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-5-surenb@google.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Cc: stable@vger.kernel.org
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2e5b4921f8efc9e845f4f04741797d16f36847eb upstream.
The walk to destroy the nodes was not always setting the node type and
would result in a destroy method potentially using the values as nodes.
Avoid this by setting the correct node types. This is necessary for the
RCU mode of the maple tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-4-surenb@google.com
Cc: <Stable@vger.kernel.org>
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a7b92d59c885018cb7bb88539892278e4fd64b29 upstream.
When initially starting a search, the root node may already be in the
process of being replaced in RCU mode. Detect and restart the walk if
this is the case. This is necessary for RCU mode of the maple tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-3-surenb@google.com
Cc: <Stable@vger.kernel.org>
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 46b345848261009477552d654cb2f65000c30e4d upstream.
If mas->node is an MAS_START, there are three cases, and they all assign
different values to mas->node and mas->offset. So there is no need to set
them to a default value before updating.
Update them directly to make them easier to understand and for better
readability.
Link: https://lkml.kernel.org/r/20221221060058.609003-7-vernon2gm@gmail.com
Cc: <Stable@vger.kernel.org>
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Vernon Yang <vernon2gm@gmail.com>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 39d0bd86c499ecd6abae42a9b7112056c5560691 upstream.
ma_pivots() and ma_data_end() may be called with a dead node. Ensure to
that the node isn't dead before using the returned values.
This is necessary for RCU mode of the maple tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-1-surenb@google.com
Link: https://lkml.kernel.org/r/20230227173632.3292573-2-surenb@google.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 17dc622c7b0f94e49bed030726df4db12ecaa6b5 upstream.
When mas_prev() does not find anything, set the state to MAS_NONE.
Handle the MAS_NONE in mas_find() like a MAS_START.
Link: https://lkml.kernel.org/r/20230120162650.984577-7-Liam.Howlett@oracle.com
Cc: <Stable@vger.kernel.org>
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: <syzbot+502859d610c661e56545@syzkaller.appspotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1202700c3f8cc5f7e4646c3cf05ee6f7c8bc6ccf upstream.
If an invalidated maple state is encountered during write, reset the maple
state to MAS_START. This will result in a re-walk of the tree to the
correct location for the write.
Link: https://lore.kernel.org/all/20230107020126.1627-1-sj@kernel.org/
Link: https://lkml.kernel.org/r/20230120162650.984577-6-Liam.Howlett@oracle.com
Cc: <Stable@vger.kernel.org>
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 50e81c82ad947045c7ed26ddc9acb17276b653b6 upstream.
When iterating, a user may operate on the tree and cause the maple state
to be altered and left in an unintuitive state. Detect this scenario and
correct it by setting to the limit and invalidating the state.
Link: https://lkml.kernel.org/r/20230120162650.984577-4-Liam.Howlett@oracle.com
Cc: <Stable@vger.kernel.org>
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 65be6f058b0eba98dc6c6f197ea9f62c9b6a519f upstream.
Ensure the node isn't dead after reading the node end.
Link: https://lkml.kernel.org/r/20230120162650.984577-3-Liam.Howlett@oracle.com
Cc: <Stable@vger.kernel.org>
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 541e06b772c1aaffb3b6a245ccface36d7107af2 upstream.
Preallocations are common in the VMA code to avoid allocating under
certain locking conditions. The preallocations must also cover the
worst-case scenario. Removing the GFP_ZERO flag from the
kmem_cache_alloc() (and bulk variant) calls will reduce the amount of time
spent zeroing memory that may not be used. Only zero out the necessary
area to keep track of the allocations in the maple state. Zero the entire
node prior to using it in the tree.
This required internal changes to node counting on allocation, so the test
code is also updated.
This restores some micro-benchmark performance: up to +9% in mmtests mmap1
by my testing +10% to +20% in mmap, mmapaddr, mmapmany tests reported by
Red Hat
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2149636
Link: https://lkml.kernel.org/r/20230105160427.2988454-1-Liam.Howlett@oracle.com
Cc: stable@vger.kernel.org
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Reported-by: Jirka Hladky <jhladky@redhat.com>
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c45ea315a602d45569b08b93e9ab30f6a63a38aa upstream.
There is a concurrency bug that may cause the wrong value to be loaded
when a CPU is modifying the maple tree.
CPU1:
mtree_insert_range()
mas_insert()
mas_store_root()
...
mas_root_expand()
...
rcu_assign_pointer(mas->tree->ma_root, mte_mk_root(mas->node));
ma_set_meta(node, maple_leaf_64, 0, slot); <---IP
CPU2:
mtree_load()
mtree_lookup_walk()
ma_data_end();
When CPU1 is about to execute the instruction pointed to by IP, the
ma_data_end() executed by CPU2 may return the wrong end position, which
will cause the value loaded by mtree_load() to be wrong.
An example of triggering the bug:
Add mdelay(100) between rcu_assign_pointer() and ma_set_meta() in
mas_root_expand().
static DEFINE_MTREE(tree);
int work(void *p) {
unsigned long val;
for (int i = 0 ; i< 30; ++i) {
val = (unsigned long)mtree_load(&tree, 8);
mdelay(5);
pr_info("%lu",val);
}
return 0;
}
mt_init_flags(&tree, MT_FLAGS_USE_RCU);
mtree_insert(&tree, 0, (void*)12345, GFP_KERNEL);
run_thread(work)
mtree_insert(&tree, 1, (void*)56789, GFP_KERNEL);
In RCU mode, mtree_load() should always return the value before or after
the data structure is modified, and in this example mtree_load(&tree, 8)
may return 56789 which is not expected, it should always return NULL. Fix
it by put ma_set_meta() before rcu_assign_pointer().
Link: https://lkml.kernel.org/r/20230314124203.91572-4-zhangpeng.00@bytedance.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ec07967d7523adb3670f9dfee0232e3bc868f3de upstream.
if (likely(offset > end))
max = pivots[offset];
The above code should be changed to if (likely(offset < end)), which is
correct. This affects the correctness of ma_data_end(). Now it seems
that the final result will not be wrong, but it is best to change it.
This patch does not change the code as above, because it simplifies the
code by the way.
Link: https://lkml.kernel.org/r/20230314124203.91572-1-zhangpeng.00@bytedance.com
Link: https://lkml.kernel.org/r/20230314124203.91572-2-zhangpeng.00@bytedance.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6906598f1ce93761716d780b6e3f171e13f0f4ce ]
assert(x) should emit a warning if x is false. WARN_ON(x) emits a
warning if x is true. Thus, assert(x) should be defined as WARN_ON(!x)
rather than WARN_ON(x).
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 0fa99fdfe1b38da396d0b2d1496a823bcd0ebea0 upstream.
Patch series "Fix mas_skip_node() for mas_empty_area()", v2.
mas_empty_area() was incorrectly returning an error when there was room.
The issue was tracked down to mas_skip_node() using the incorrect
end-of-slot count. Instead of using the nodes hard limit, the limit of
data should be used.
mas_skip_node() was also setting the min and max to that of the child
node, which was unnecessary. Within these limits being set, there was
also a bug that corrupted the maple state's max if the offset was set to
the maximum node pivot. The bug was without consequence unless there was
a sufficient gap in the next child node which would cause an error to be
returned.
This patch set fixes these errors by removing the limit setting from
mas_skip_node() and uses the mas_data_end() for slot limits, and adds
tests for all failures discovered.
This patch (of 2):
mas_skip_node() is used to move the maple state to the node with a higher
limit. It does this by walking up the tree and increasing the slot count.
Since slot count may not be able to be increased, it may need to walk up
multiple times to find room to walk right to a higher limit node. The
limit of slots that was being used was the node limit and not the last
location of data in the node. This would cause the maple state to be
shifted outside actual data and enter an error state, thus returning
-EBUSY.
The result of the incorrect error state means that mas_awalk() would
return an error instead of finding the allocation space.
The fix is to use mas_data_end() in mas_skip_node() to detect the nodes
data end point and continue walking the tree up until it is safe to move
to a node with a higher limit.
The walk up the tree also sets the maple state limits so remove the buggy
code from mas_skip_node(). Setting the limits had the unfortunate side
effect of triggering another bug if the parent node was full and the there
was no suitable gap in the second last child, but room in the next child.
mas_skip_node() may also be passed a maple state in an error state from
mas_anode_descend() when no allocations are available. Return on such an
error state immediately.
Link: https://lkml.kernel.org/r/20230307180247.2220303-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20230307180247.2220303-2-Liam.Howlett@oracle.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Snild Dolkow <snild@sony.com>
Link: https://lore.kernel.org/linux-mm/cb8dc31a-fef2-1d09-f133-e9f7b9f9e77a@sony.com/
Tested-by: Snild Dolkow <snild@sony.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4bd6dded6318dc8e2514d74868c1f8fb38b61a60 upstream.
Test robust filling of an entire area of the tree, then test one beyond.
This is to test the walking back up the tree at the end of nodes and error
condition. Test inspired by the reproducer code provided by Snild Dolkow.
The last test in the function tests for the case of a corrupted maple
state caused by the incorrect limits set during mas_skip_node(). There
needs to be a gap in the second last child and last child, but the search
must rule out the second last child's gap. This would avoid correcting
the maple state to the correct max limit and return an error.
Link: https://lkml.kernel.org/r/20230307180247.2220303-3-Liam.Howlett@oracle.com
Cc: Snild Dolkow <snild@sony.com>
Link: https://lore.kernel.org/linux-mm/cb8dc31a-fef2-1d09-f133-e9f7b9f9e77a@sony.com/
Fixes: e15e06a83923 ("lib/test_maple_tree: add testing for maple tree")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 26edb30dd1c0c9be11fa676b4f330ada7b794ba6 upstream.
Jan reported the new algorithm as merged might be problematic if the
queue being awaken becomes empty between the waitqueue_active inside
sbq_wake_ptr check and the wake up. If that happens, wake_up_nr will
not wake up any waiter and we loose too many wake ups. In order to
guarantee progress, we need to wake up at least one waiter here, if
there are any. This now requires trying to wake up from every queue.
Instead of walking through all the queues with sbq_wake_ptr, this call
moves the wake up inside that function. In a previous version of the
patch, I found that updating wake_index several times when walking
through queues had a measurable overhead. This ensures we only update
it once, at the end.
Fixes: 4f8126bb2308 ("sbitmap: Use single per-bitmap counting to wake up queued tags")
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221115224553.23594-4-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 976570b4ecd30d3ec6e1b0910da8e5edc591f2b6 upstream.
When a queue is awaken, the wake_index written by sbq_wake_ptr currently
keeps pointing to the same queue. On the next wake up, it will thus
retry the same queue, which is unfair to other queues, and can lead to
starvation. This patch, moves the index update to happen before the
queue is returned, such that it will now try a different queue first on
the next wake up, improving fairness.
Fixes: 4f8126bb2308 ("sbitmap: Use single per-bitmap counting to wake up queued tags")
Reported-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20221115224553.23594-2-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5a5d7e9badd2cb8065db171961bd30bd3595e4b6 ]
In order to avoid WARN/BUG from generating nested or even recursive
warnings, force rcu_is_watching() true during
WARN/lockdep_rcu_suspicious().
Notably things like unwinding the stack can trigger rcu_dereference()
warnings, which then triggers more unwinding which then triggers more
warnings etc..
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230126151323.408156109@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3bb2a01caa813d3a1845d378bbe4169ef280d394 ]
In kobject_get_path(), if kobj->name is changed between calls
get_kobj_path_length() and fill_kobj_path() and the length becomes
longer, then fill_kobj_path() will have an out-of-bounds bug.
The actual current problem occurs when the ixgbe probe.
In ixgbe_mii_bus_init(), if the length of netdev->dev.kobj.name
length becomes longer, out-of-bounds will occur.
cpu0 cpu1
ixgbe_probe
register_netdev(netdev)
netdev_register_kobject
device_add
kobject_uevent // Sending ADD events
systemd-udevd // rename netdev
dev_change_name
device_rename
kobject_rename
ixgbe_mii_bus_init |
mdiobus_register |
__mdiobus_register |
device_register |
device_add |
kobject_uevent |
kobject_get_path |
len = get_kobj_path_length // old name |
path = kzalloc(len, gfp_mask); |
kobj->name = name;
/* name length becomes
* longer
*/
fill_kobj_path /* kobj path length is
* longer than path,
* resulting in out of
* bounds when filling path
*/
This is the kasan report:
==================================================================
BUG: KASAN: slab-out-of-bounds in fill_kobj_path+0x50/0xc0
Write of size 7 at addr ff1100090573d1fd by task kworker/28:1/673
Workqueue: events work_for_cpu_fn
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x48
print_address_description.constprop.0+0x86/0x1e7
print_report+0x36/0x4f
kasan_report+0xad/0x130
kasan_check_range+0x35/0x1c0
memcpy+0x39/0x60
fill_kobj_path+0x50/0xc0
kobject_get_path+0x5a/0xc0
kobject_uevent_env+0x140/0x460
device_add+0x5c7/0x910
__mdiobus_register+0x14e/0x490
ixgbe_probe.cold+0x441/0x574 [ixgbe]
local_pci_probe+0x78/0xc0
work_for_cpu_fn+0x26/0x40
process_one_work+0x3b6/0x6a0
worker_thread+0x368/0x520
kthread+0x165/0x1a0
ret_from_fork+0x1f/0x30
This reproducer triggers that bug:
while:
do
rmmod ixgbe
sleep 0.5
modprobe ixgbe
sleep 0.5
When calling fill_kobj_path() to fill path, if the name length of
kobj becomes longer, return failure and retry. This fixes the problem.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20221220012143.52141-1-wanghai38@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 33a0a1e3b3d17445832177981dc7a1c6a5b009f8 ]
kobject_get_path() does not modify the kobject passed to it, so make the
pointer constant.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20221001165315.2690141-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 3bb2a01caa81 ("kobject: Fix slab-out-of-bounds in fill_kobj_path()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0c2baf6509af1d11310ae4c1c839481a6e9a4bc4 ]
On most architectures, gcc -Wextra warns about the list of error
numbers containing both EDEADLK and EDEADLOCK:
lib/errname.c:15:67: warning: initialized field overwritten [-Woverride-init]
15 | #define E(err) [err + BUILD_BUG_ON_ZERO(err <= 0 || err > 300)] = "-" #err
| ^~~
lib/errname.c:172:2: note: in expansion of macro 'E'
172 | E(EDEADLK), /* EDEADLOCK */
| ^
On parisc, a similar error happens with -ECANCELLED, which is an
alias for ECANCELED.
Make the EDEADLK printing conditional on the number being distinct
from EDEADLOCK, and remove the -ECANCELLED bit completely as it
can never be hit.
To ensure these are correct, add static_assert lines that verify
all the remaining aliases are in fact identical to the canonical
name.
Fixes: 57f5677e535b ("printf: add support for printing symbolic error names")
Cc: Petr Mladek <pmladek@suse.com>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/all/20210514213456.745039-1-arnd@kernel.org/
Link: https://lore.kernel.org/all/20210927123409.1109737-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230206194126.380350-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7361d1bc307b926cbca214ab67b641123c2d6357 ]
The helper mpi_read_raw_from_sgl sets the number of entries in
the SG list according to nbytes. However, if the last entry
in the SG list contains more data than nbytes, then it may overrun
the buffer because it only allocates enough memory for nbytes.
Fixes: 2d4d1eea540b ("lib/mpi: Add mpi sgl helpers")
Reported-by: Roberto Sassu <roberto.sassu@huaweicloud.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b5fcf7871acb7f9a3a8ed341a68bd86aba3e254a ]
Commit 180dccb0dba4f ("blk-mq: fix tag_get wait task can't be awakened")
mentioned that in case of shared tags, there could be just one real
active hctx(queue) because of lazy detection of tag idle. Then driver tag
allocation may wait forever on this real active hctx(queue) if wake_batch
is > hctx_max_depth where hctx_max_depth is available tags depth for the
actve hctx(queue). However, the condition wake_batch > hctx_max_depth is
not strong enough to avoid IO hung as the sbitmap_queue_wake_up will only
wake up one wait queue for each wake_batch even though there is only one
waiter in the woken wait queue. After this, there is only one tag to free
and wake_batch may not be reached anymore. Commit 180dccb0dba4f ("blk-mq:
fix tag_get wait task can't be awakened") methioned that driver tag
allocation may wait forever. Actually, the inactive hctx(queue) will be
truely idle after at most 30 seconds and will call blk_mq_tag_wakeup_all
to wake one waiter per wait queue to break the hung. But IO hung for 30
seconds is also not acceptable. Set batch size to small enough that depth
of the shared hctx(queue) is enough to wake up all of the queues like
sbq_calc_wake_batch do to fix this potential IO hung.
Although hctx_max_depth will be clamped to at least 4 while wake_batch
recalculation does not do the clamp, the wake_batch will be always
recalculated to 1 when hctx_max_depth <= 4.
Fixes: 180dccb0dba4 ("blk-mq: fix tag_get wait task can't be awakened")
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230116205059.3821738-6-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4f8126bb2308066b877859e4b5923ffb54143630 ]
sbitmap suffers from code complexity, as demonstrated by recent fixes,
and eventual lost wake ups on nested I/O completion. The later happens,
from what I understand, due to the non-atomic nature of the updates to
wait_cnt, which needs to be subtracted and eventually reset when equal
to zero. This two step process can eventually miss an update when a
nested completion happens to interrupt the CPU in between the wait_cnt
updates. This is very hard to fix, as shown by the recent changes to
this code.
The code complexity arises mostly from the corner cases to avoid missed
wakes in this scenario. In addition, the handling of wake_batch
recalculation plus the synchronization with sbq_queue_wake_up is
non-trivial.
This patchset implements the idea originally proposed by Jan [1], which
removes the need for the two-step updates of wait_cnt. This is done by
tracking the number of completions and wakeups in always increasing,
per-bitmap counters. Instead of having to reset the wait_cnt when it
reaches zero, we simply keep counting, and attempt to wake up N threads
in a single wait queue whenever there is enough space for a batch.
Waking up less than batch_wake shouldn't be a problem, because we
haven't changed the conditions for wake up, and the existing batch
calculation guarantees at least enough remaining completions to wake up
a batch for each queue at any time.
Performance-wise, one should expect very similar performance to the
original algorithm for the case where there is no queueing. In both the
old algorithm and this implementation, the first thing is to check
ws_active, which bails out if there is no queueing to be managed. In the
new code, we took care to avoid accounting completions and wakeups when
there is no queueing, to not pay the cost of atomic operations
unnecessarily, since it doesn't skew the numbers.
For more interesting cases, where there is queueing, we need to take
into account the cross-communication of the atomic operations. I've
been benchmarking by running parallel fio jobs against a single hctx
nullb in different hardware queue depth scenarios, and verifying both
IOPS and queueing.
Each experiment was repeated 5 times on a 20-CPU box, with 20 parallel
jobs. fio was issuing fixed-size randwrites with qd=64 against nullb,
varying only the hardware queue length per test.
queue size 2 4 8 16 32 64
6.1-rc2 1681.1K (1.6K) 2633.0K (12.7K) 6940.8K (16.3K) 8172.3K (617.5K) 8391.7K (367.1K) 8606.1K (351.2K)
patched 1721.8K (15.1K) 3016.7K (3.8K) 7543.0K (89.4K) 8132.5K (303.4K) 8324.2K (230.6K) 8401.8K (284.7K)
The following is a similar experiment, ran against a nullb with a single
bitmap shared by 20 hctx spread across 2 NUMA nodes. This has 40
parallel fio jobs operating on the same device
queue size 2 4 8 16 32 64
6.1-rc2 1081.0K (2.3K) 957.2K (1.5K) 1699.1K (5.7K) 6178.2K (124.6K) 12227.9K (37.7K) 13286.6K (92.9K)
patched 1081.8K (2.8K) 1316.5K (5.4K) 2364.4K (1.8K) 6151.4K (20.0K) 11893.6K (17.5K) 12385.6K (18.4K)
It has also survived blktests and a 12h-stress run against nullb. I also
ran the code against nvme and a scsi SSD, and I didn't observe
performance regression in those. If there are other tests you think I
should run, please let me know and I will follow up with results.
[1] https://lore.kernel.org/all/aef9de29-e9f5-259a-f8be-12d1b734e72@google.com/
Cc: Hugh Dickins <hughd@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Liu Song <liusong@linux.alibaba.com>
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20221105231055.25953-1-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: b5fcf7871acb ("sbitmap: correct wake_batch recalculation to avoid potential IO hung")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 903e86f3a64d9573352bbab2f211fdbbaa5772b7 ]
Commit fbb564a557809 ("lib/sbitmap: Fix invalid loop in
__sbitmap_queue_get_batch()") mentioned that "Checking free bits when
setting the target bits. Otherwise, it may reuse the busying bits."
This commit add check to make sure all masked bits in word before
cmpxchg is zero. Then the existing check after cmpxchg to check any
zero bit is existing in masked bits in word is redundant.
Actually, old value of word before cmpxchg is stored in val and we
will filter out busy bits in val by "(get_mask & ~val)" after cmpxchg.
So we will not reuse busy bits methioned in commit fbb564a557809
("lib/sbitmap: Fix invalid loop in __sbitmap_queue_get_batch()"). Revert
new-added check to remove redundant check.
Fixes: fbb564a55780 ("lib/sbitmap: Fix invalid loop in __sbitmap_queue_get_batch()")
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230116205059.3821738-3-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 74e19ef0ff8061ef55957c3abd71614ef0f42f47 upstream.
The results of "access_ok()" can be mis-speculated. The result is that
you can end speculatively:
if (access_ok(from, size))
// Right here
even for bad from/size combinations. On first glance, it would be ideal
to just add a speculation barrier to "access_ok()" so that its results
can never be mis-speculated.
But there are lots of system calls just doing access_ok() via
"copy_to_user()" and friends (example: fstat() and friends). Those are
generally not problematic because they do not _consume_ data from
userspace other than the pointer. They are also very quick and common
system calls that should not be needlessly slowed down.
"copy_from_user()" on the other hand uses a user-controller pointer and
is frequently followed up with code that might affect caches. Take
something like this:
if (!copy_from_user(&kernelvar, uptr, size))
do_something_with(kernelvar);
If userspace passes in an evil 'uptr' that *actually* points to a kernel
addresses, and then do_something_with() has cache (or other)
side-effects, it could allow userspace to infer kernel data values.
Add a barrier to the common copy_from_user() code to prevent
mis-speculated values which happen after the copy.
Also add a stub for architectures that do not define barrier_nospec().
This makes the macro usable in generic code.
Since the barrier is now usable in generic code, the x86 #ifdef in the
BPF code can also go away.
Reported-by: Jordy Zomer <jordyzomer@google.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Daniel Borkmann <daniel@iogearbox.net> # BPF bits
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7327e8111adb315423035fb5233533016dfd3f2e upstream.
mas_empty_area_rev() was not correctly validating the start of a gap
against the lower limit. This could lead to the range starting lower than
the requested minimum.
Fix the issue by better validating a gap once one is found.
This commit also adds tests to the maple tree test suite for this issue
and tests the mas_empty_area() function for similar bound checking.
Link: https://lkml.kernel.org/r/20230111200136.1851322-1-Liam.Howlett@oracle.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216911
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: <amanieu@gmail.com>
Link: https://lore.kernel.org/linux-mm/0b9f5425-08d4-8013-aa4c-e620c3b10bb2@leemhuis.info/
Tested-by: Holger Hoffsttte <holger@applied-asynchrony.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ab6ef70a8b0d314c2160af70b0de984664d675e0 ]
We should get pivots boundary by type. Fixes a potential overindexing of
mt_pivots[].
Link: https://lkml.kernel.org/r/20221112234308.23823-1-richard.weiyang@gmail.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f0950402e8c76e7dcb08563f1b4e8000fbc62455 ]
Most netlink attributes are parsed and validated from
__nla_validate_parse() or validate_nla()
u16 type = nla_type(nla);
if (type == 0 || type > maxtype) {
/* error or continue */
}
@type is then used as an array index and can be used
as a Spectre v1 gadget.
array_index_nospec() can be used to prevent leaking
content of kernel memory to malicious users.
This should take care of vast majority of netlink uses,
but an audit is needed to take care of others where
validation is not yet centralized in core netlink functions.
Fixes: bfa83a9e03cf ("[NETLINK]: Type-safe netlink messages/attributes interface")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230119110150.2678537-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f5fe24ef17b5fbe6db49534163e77499fb10ae8c ]
On the x86-64 architecture even a failing cmpxchg grants exclusive
access to the cacheline, making it preferable to retry the failed op
immediately instead of stalling with the pause instruction.
To illustrate the impact, below are benchmark results obtained by
running various will-it-scale tests on top of the 6.2-rc3 kernel and
Cascade Lake (2 sockets * 24 cores * 2 threads) CPU.
All results in ops/s. Note there is some variance in re-runs, but the
code is consistently faster when contention is present.
open3 ("Same file open/close"):
proc stock no-pause
1 805603 814942 (+%1)
2 1054980 1054781 (-0%)
8 1544802 1822858 (+18%)
24 1191064 2199665 (+84%)
48 851582 1469860 (+72%)
96 609481 1427170 (+134%)
fstat2 ("Same file fstat"):
proc stock no-pause
1 3013872 3047636 (+1%)
2 4284687 4400421 (+2%)
8 3257721 5530156 (+69%)
24 2239819 5466127 (+144%)
48 1701072 5256609 (+209%)
96 1269157 6649326 (+423%)
Additionally, a kernel with a private patch to help access() scalability:
access2 ("Same file access"):
proc stock patched patched
+nopause
24 2378041 2005501 5370335 (-15% / +125%)
That is, fixing the problems in access itself *reduces* scalability
after the cacheline ping-pong only happens in lockref with the pause
instruction.
Note that fstat and access benchmarks are not currently integrated into
will-it-scale, but interested parties can find them in pull requests to
said project.
Code at hand has a rather tortured history. First modification showed
up in commit d472d9d98b46 ("lockref: Relax in cmpxchg loop"), written
with Itanium in mind. Later it got patched up to use an arch-dependent
macro to stop doing it on s390 where it caused a significant regression.
Said macro had undergone revisions and was ultimately eliminated later,
going back to cpu_relax.
While I intended to only remove cpu_relax for x86-64, I got the
following comment from Linus:
I would actually prefer just removing it entirely and see if
somebody else hollers. You have the numbers to prove it hurts on
real hardware, and I don't think we have any numbers to the
contrary.
So I think it's better to trust the numbers and remove it as a
failure, than say "let's just remove it on x86-64 and leave
everybody else with the potentially broken code"
Additionally, Will Deacon (maintainer of the arm64 port, one of the
architectures previously benchmarked):
So, from the arm64 side of the fence, I'm perfectly happy just
removing the cpu_relax() calls from lockref.
As such, come back full circle in history and whack it altogether.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/all/CAGudoHHx0Nqg6DE70zAVA75eV-HXfWyhVMWZ-aSeOofkA_=WdA@mail.gmail.com/
Acked-by: Tony Luck <tony.luck@intel.com> # ia64
Acked-by: Nicholas Piggin <npiggin@gmail.com> # powerpc
Acked-by: Will Deacon <will@kernel.org> # arm64
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 79cc1ba7badf9e7a12af99695a557e9ce27ee967 upstream.
Several run-time checkers (KASAN, UBSAN, KFENCE, KCSAN, sched) roll
their own warnings, and each check "panic_on_warn". Consolidate this
into a single function so that future instrumentation can be added in
a single location.
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Gow <davidgow@google.com>
Cc: tangmeng <tangmeng@uniontech.com>
Cc: Jann Horn <jannh@google.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: kasan-dev@googlegroups.com
Cc: linux-mm@kvack.org
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20221117234328.594699-4-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
