summaryrefslogtreecommitdiff
path: root/lib
AgeCommit message (Collapse)AuthorFilesLines
2020-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds1-0/+2
Pull networking fixes from David Miller: 1) Disable RISCV BPF JIT builds when !MMU, from Björn Töpel. 2) nf_tables leaves dangling pointer after free, fix from Eric Dumazet. 3) Out of boundary write in __xsk_rcv_memcpy(), fix from Li RongQing. 4) Adjust icmp6 message source address selection when routes have a preferred source address set, from Tim Stallard. 5) Be sure to validate HSR protocol version when creating new links, from Taehee Yoo. 6) CAP_NET_ADMIN should be sufficient to manage l2tp tunnels even in non-initial namespaces, from Michael Weiß. 7) Missing release firmware call in mlx5, from Eran Ben Elisha. 8) Fix variable type in macsec_changelink(), caught by KASAN. Fix from Taehee Yoo. 9) Fix pause frame negotiation in marvell phy driver, from Clemens Gruber. 10) Record RX queue early enough in tun packet paths such that XDP programs will see the correct RX queue index, from Gilberto Bertin. 11) Fix double unlock in mptcp, from Florian Westphal. 12) Fix offset overflow in ARM bpf JIT, from Luke Nelson. 13) marvell10g needs to soft reset PHY when coming out of low power mode, from Russell King. 14) Fix MTU setting regression in stmmac for some chip types, from Florian Fainelli. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits) amd-xgbe: Use __napi_schedule() in BH context mISDN: make dmril and dmrim static net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode tipc: fix incorrect increasing of link window Documentation: Fix tcp_challenge_ack_limit default value net: tulip: make early_486_chipsets static dt-bindings: net: ethernet-phy: add desciption for ethernet-phy-id1234.d400 ipv6: remove redundant assignment to variable err net/rds: Use ERR_PTR for rds_message_alloc_sgs() net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge selftests/bpf: Check for correct program attach/detach in xdp_attach test libbpf: Fix type of old_fd in bpf_xdp_set_link_opts libbpf: Always specify expected_attach_type on program load if supported xsk: Add missing check on user supplied headroom size mac80211: fix channel switch trigger from unknown mesh peer mac80211: fix race in ieee80211_register_hw() net: marvell10g: soft-reset the PHY when coming out of low power net: marvell10g: report firmware version net/cxgb4: Check the return from t4_query_params properly ...
2020-04-11Merge tag 'kbuild-v5.7-2' of ↵Linus Torvalds5-30/+3
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - raise minimum supported binutils version to 2.23 - remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports - move remaining CONFIG_AS_* tests to Kconfig from Makefile - enable -Wtautological-compare warnings to catch more issues - do not support GCC plugins for GCC <= 4.7 - fix various breakages of 'make xconfig' - include the linker version used for linking the kernel into LINUX_COMPILER, which is used for the banner, and also exposed to /proc/version - link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which allows us to remove the lib-ksyms.o workaround, and to solve the last known issue of the LLVM linker - add dummy tools in scripts/dummy-tools/ to enable all compiler tests in Kconfig, which will be useful for distro maintainers - support the single switch, LLVM=1 to use Clang and all LLVM utilities instead of GCC and Binutils. - support LLVM_IAS=1 to enable the integrated assembler, which is still experimental * tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits) kbuild: fix comment about missing include guard detection kbuild: support LLVM=1 to switch the default tools to Clang/LLVM kbuild: replace AS=clang with LLVM_IAS=1 kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory kbuild: remove -I$(srctree)/tools/include from scripts/Makefile kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h Documentation/llvm: fix the name of llvm-size kbuild: mkcompile_h: Include $LD version in /proc/version kconfig: qconf: Fix a few alignment issues kconfig: qconf: remove some old bogus TODOs kconfig: qconf: fix support for the split view mode kconfig: qconf: fix the content of the main widget kconfig: qconf: Change title for the item window kconfig: qconf: clean deprecated warnings gcc-plugins: drop support for GCC <= 4.7 kbuild: Enable -Wtautological-compare x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2 crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean' ...
2020-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller1-0/+2
Daniel Borkmann says: ==================== pull-request: bpf 2020-04-10 The following pull-request contains BPF updates for your *net* tree. We've added 13 non-merge commits during the last 7 day(s) which contain a total of 13 files changed, 137 insertions(+), 43 deletions(-). The main changes are: 1) JIT code emission fixes for riscv and arm32, from Luke Nelson and Xi Wang. 2) Disable vmlinux BTF info if GCC_PLUGIN_RANDSTRUCT is used, from Slava Bacherikov. 3) Fix oob write in AF_XDP when meta data is used, from Li RongQing. 4) Fix bpf_get_link_xdp_id() handling on single prog when flags are specified, from Andrey Ignatov. 5) Fix sk_assign() BPF helper for request sockets that can have sk_reuseport field uninitialized, from Joe Stringer. 6) Fix mprotect() test case for the BPF LSM, from KP Singh. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-09Merge tag 'libnvdimm-for-5.7' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm and dax updates from Dan Williams: "There were multiple touches outside of drivers/nvdimm/ this round to add cross arch compatibility to the devm_memremap_pages() interface, enhance numa information for persistent memory ranges, and add a zero_page_range() dax operation. This cycle I switched from the patchwork api to Konstantin's b4 script for collecting tags (from x86, PowerPC, filesystem, and device-mapper folks), and everything looks to have gone ok there. This has all appeared in -next with no reported issues. Summary: - Add support for region alignment configuration and enforcement to fix compatibility across architectures and PowerPC page size configurations. - Introduce 'zero_page_range' as a dax operation. This facilitates filesystem-dax operation without a block-device. - Introduce phys_to_target_node() to facilitate drivers that want to know resulting numa node if a given reserved address range was onlined. - Advertise a persistence-domain for of_pmem and papr_scm. The persistence domain indicates where cpu-store cycles need to reach in the platform-memory subsystem before the platform will consider them power-fail protected. - Promote numa_map_to_online_node() to a cross-kernel generic facility. - Save x86 numa information to allow for node-id lookups for reserved memory ranges, deploy that capability for the e820-pmem driver. - Pick up some miscellaneous minor fixes, that missed v5.6-final, including a some smatch reports in the ioctl path and some unit test compilation fixups. - Fixup some flexible-array declarations" * tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (29 commits) dax: Move mandatory ->zero_page_range() check in alloc_dax() dax,iomap: Add helper dax_iomap_zero() to zero a range dax: Use new dax zero page method for zeroing a page dm,dax: Add dax zero_page_range operation s390,dcssblk,dax: Add dax zero_page_range operation to dcssblk driver dax, pmem: Add a dax operation zero_page_range pmem: Add functions for reading/writing page to/from pmem libnvdimm: Update persistence domain value for of_pmem and papr_scm device tools/test/nvdimm: Fix out of tree build libnvdimm/region: Fix build error libnvdimm/region: Replace zero-length array with flexible-array member libnvdimm/label: Replace zero-length array with flexible-array member ACPI: NFIT: Replace zero-length array with flexible-array member libnvdimm/region: Introduce an 'align' attribute libnvdimm/region: Introduce NDD_LABELING libnvdimm/namespace: Enforce memremap_compat_align() libnvdimm/pfn: Prevent raw mode fallback if pfn-infoblock valid libnvdimm: Out of bounds read in __nd_ioctl() acpi/nfit: improve bounds checking for 'func' mm/memremap_pages: Introduce memremap_compat_align() ...
2020-04-08x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2Jason A. Donenfeld4-19/+0
Now that the kernel specifies binutils 2.23 as the minimum version, we can remove ifdefs for AVX2 and ADX throughout. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-08x86: remove always-defined CONFIG_AS_SSSE3Masahiro Yamada3-10/+2
CONFIG_AS_SSSE3 was introduced by commit 75aaf4c3e6a4 ("x86/raid6: correctly check for assembler capabilities"). We raise the minimal supported binutils version from time to time. The last bump was commit 1fb12b35e5ff ("kbuild: Raise the minimum required binutils version to 2.21"). I confirmed the code in $(call as-instr,...) can be assembled by the binutils 2.21 assembler and also by LLVM integrated assembler. Remove CONFIG_AS_SSSE3, which is always defined. I added ifdef CONFIG_X86 to lib/raid6/algos.c to avoid link errors on non-x86 architectures. lib/raid6/algos.c is built not only for the kernel but also for testing the library code from userspace. I added -DCONFIG_X86 to lib/raid6/test/Makefile to cator to this usecase. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2020-04-08lib/raid6/test: fix build on distros whose /bin/sh is not bashMasahiro Yamada1-3/+3
You can build a user-space test program for the raid6 library code, like this: $ cd lib/raid6/test $ make The command in $(shell ...) function is evaluated by /bin/sh by default. (or, you can specify the shell by passing SHELL=<shell> from command line) Currently '>&/dev/null' is used to sink both stdout and stderr. Because this code is bash-ism, it only works when /bin/sh is a symbolic link to bash (this is the case on RHEL etc.) This does not work on Ubuntu where /bin/sh is a symbolic link to dash. I see lots of /bin/sh: 1: Syntax error: Bad fd number and warning "your version of binutils lacks ... support" Replace it with portable '>/dev/null 2>&1'. Fixes: 4f8c55c5ad49 ("lib/raid6: build proper files on corresponding arch") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: H. Peter Anvin (Intel) <hpa@zytor.com> Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
2020-04-07lib/Kconfig.debug: fix a typo "capabilitiy" -> "capability"Qiujun Huang1-1/+1
s/capabilitiy/capability Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1585818594-27373-1-git-send-email-hqjagain@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07ubsan: include bug type in report headerKees Cook1-21/+15
When syzbot tries to figure out how to deduplicate bug reports, it prefers seeing a hint about a specific bug type (we can do better than just "UBSAN"). This lifts the handler reason into the UBSAN report line that includes the file path that tripped a check. Unfortunately, UBSAN does not provide function names. Suggested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Elena Petrova <lenaptr@google.com> Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com> Link: http://lkml.kernel.org/r/20200227193516.32566-7-keescook@chromium.org Link: https://lore.kernel.org/lkml/CACT4Y+bsLJ-wFx_TaXqax3JByUOWB3uk787LsyMVcfW6JzzGvg@mail.gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07ubsan: check panic_on_warnKees Cook1-0/+11
Syzkaller expects kernel warnings to panic when the panic_on_warn sysctl is set. More work is needed here to have UBSan reuse the WARN infrastructure, but for now, just check the flag manually. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Elena Petrova <lenaptr@google.com> Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com> Link: https://lore.kernel.org/lkml/CACT4Y+bsLJ-wFx_TaXqax3JByUOWB3uk787LsyMVcfW6JzzGvg@mail.gmail.com Link: http://lkml.kernel.org/r/20200227193516.32566-5-keescook@chromium.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07ubsan: split "bounds" checker from other optionsKees Cook1-5/+24
In order to do kernel builds with the bounds checker individually available, introduce CONFIG_UBSAN_BOUNDS, with the remaining options under CONFIG_UBSAN_MISC. For example, using this, we can start to expand the coverage syzkaller is providing. Right now, all of UBSan is disabled for syzbot builds because taken as a whole, it is too noisy. This will let us focus on one feature at a time. For the bounds checker specifically, this provides a mechanism to eliminate an entire class of array overflows with close to zero performance overhead (I cannot measure a difference). In my (mostly) defconfig, enabling bounds checking adds ~4200 checks to the kernel. Performance changes are in the noise, likely due to the branch predictors optimizing for the non-fail path. Some notes on the bounds checker: - it does not instrument {mem,str}*()-family functions, it only instruments direct indexed accesses (e.g. "foo[i]"). Dealing with the {mem,str}*()-family functions is a work-in-progress around CONFIG_FORTIFY_SOURCE[1]. - it ignores flexible array members, including the very old single byte (e.g. "int foo[1];") declarations. (Note that GCC's implementation appears to ignore _all_ trailing arrays, but Clang only ignores empty, 0, and 1 byte arrays[2].) [1] https://github.com/KSPP/linux/issues/6 [2] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92589 Suggested-by: Elena Petrova <lenaptr@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com> Link: http://lkml.kernel.org/r/20200227193516.32566-3-keescook@chromium.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07ubsan: add trap instrumentation optionKees Cook2-4/+20
Patch series "ubsan: Split out bounds checker", v5. This splits out the bounds checker so it can be individually used. This is enabled in Android and hopefully for syzbot. Includes LKDTM tests for behavioral corner-cases (beyond just the bounds checker), and adjusts ubsan and kasan slightly for correct panic handling. This patch (of 6): The Undefined Behavior Sanitizer can operate in two modes: warning reporting mode via lib/ubsan.c handler calls, or trap mode, which uses __builtin_trap() as the handler. Using lib/ubsan.c means the kernel image is about 5% larger (due to all the debugging text and reporting structures to capture details about the warning conditions). Using the trap mode, the image size changes are much smaller, though at the loss of the "warning only" mode. In order to give greater flexibility to system builders that want minimal changes to image size and are prepared to deal with kernel code being aborted and potentially destabilizing the system, this introduces CONFIG_UBSAN_TRAP. The resulting image sizes comparison: text data bss dec hex filename 19533663 6183037 18554956 44271656 2a38828 vmlinux.stock 19991849 7618513 18874448 46484810 2c54d4a vmlinux.ubsan 19712181 6284181 18366540 44362902 2a4ec96 vmlinux.ubsan-trap CONFIG_UBSAN=y: image +4.8% (text +2.3%, data +18.9%) CONFIG_UBSAN_TRAP=y: image +0.2% (text +0.9%, data +1.6%) Additionally adjusts the CONFIG_UBSAN Kconfig help for clarity and removes the mention of non-existing boot param "ubsan_handle". Suggested-by: Elena Petrova <lenaptr@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Link: http://lkml.kernel.org/r/20200227193516.32566-2-keescook@chromium.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07lib/dynamic_debug.c: use address-of operator on section symbolsNathan Chancellor1-1/+1
Clang warns: ../lib/dynamic_debug.c:1034:24: warning: array comparison always evaluates to false [-Wtautological-compare] if (__start___verbose == __stop___verbose) { ^ 1 warning generated. These are not true arrays, they are linker defined symbols, which are just addresses. Using the address of operator silences the warning and does not change the resulting assembly with either clang/ld.lld or gcc/ld (tested with diff + objdump -Dr). Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Jason Baron <jbaron@akamai.com> Link: https://github.com/ClangBuiltLinux/linux/issues/894 Link: http://lkml.kernel.org/r/20200220051320.10739-1-natechancellor@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07lib/test_kmod.c: remove a NULL testDan Carpenter1-1/+1
The "info" pointer has already been dereferenced so checking here is too late. Fortunately, we never pass NULL pointers to the test_kmod_put_module() function so the test can simply be removed. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Link: http://lkml.kernel.org/r/20200228092452.vwkhthsn77nrxdy6@kili.mountain Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07lib/rbtree: fix coding style of assignmentschenqiwu1-2/+2
Leave blank space between the right-hand and left-hand side of the assignment to meet the kernel coding style better. Signed-off-by: chenqiwu <chenqiwu@xiaomi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Michel Lespinasse <walken@google.com> Link: http://lkml.kernel.org/r/1582621140-25850-1-git-send-email-qiwuchen55@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07lib/test_bitmap.c: make use of EXP2_IN_BITSAndy Shevchenko1-0/+2
Commit 30544ed5de43 ("lib/bitmap: introduce bitmap_replace() helper") introduced some new test cases to the test_bitmap.c module. Among these it also introduced an (unused) definition. Let's make use of EXP2_IN_BITS. Reported-by: Alex Shi <alex.shi@linux.alibaba.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Link: http://lkml.kernel.org/r/20200121151847.75223-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07kasan: stackdepot: move filter_irq_stacks() to stackdepot.cAlexander Potapenko1-0/+24
filter_irq_stacks() can be used by other tools (e.g. KMSAN), so it needs to be moved to a common location. lib/stackdepot.c seems a good place, as filter_irq_stacks() is usually applied to the output of stack_trace_save(). This patch has been previously mailed as part of KMSAN RFC patch series. [glider@google.co: nds32: linker script: add SOFTIRQENTRY_TEXT\ Link: http://lkml.kernel.org/r/20200311121002.241430-1-glider@google.com [glider@google.com: add IRQENTRY_TEXT and SOFTIRQENTRY_TEXT to linker script] Link: http://lkml.kernel.org/r/20200311121124.243352-1-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Link: http://lkml.kernel.org/r/20200220141916.55455-3-glider@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07lib/stackdepot.c: build with -fno-builtinAlexander Potapenko1-0/+4
Clang may replace stackdepot_memcmp() with a call to instrumented bcmp(), which is exactly what we wanted to avoid creating stackdepot_memcmp(). Building the file with -fno-builtin prevents such optimizations. This patch has been previously mailed as part of KMSAN RFC patch series. Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Link: http://lkml.kernel.org/r/20200220141916.55455-2-glider@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07lib/stackdepot.c: check depot_index before accessing the stack slabAlexander Potapenko1-2/+13
Avoid crashes on corrupted stack ids. Despite stack ID corruption may indicate other bugs in the program, we'd better fail gracefully on such IDs instead of crashing the kernel. This patch has been previously mailed as part of KMSAN RFC patch series. Link: http://lkml.kernel.org/r/20200220141916.55455-1-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> From: Dan Carpenter <dan.carpenter@oracle.com> Subject: lib/stackdepot.c: fix a condition in stack_depot_fetch() We should check for a NULL pointer first before adding the offset. Otherwise if the pointer is NULL and the offset is non-zero, it will lead to an Oops. Fixes: d45048e65a59 ("lib/stackdepot.c: check depot_index before accessing the stack slab") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Alexander Potapenko <glider@google.com> Link: http://lkml.kernel.org/r/20200312113006.GA20562@mwanda Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07lib: test_stackinit.c: XFAIL switch variable init testsKees Cook2-10/+19
The tests for initializing a variable defined between a switch statement's test and its first "case" statement are currently not initialized in Clang[1] nor the proposed auto-initialization feature in GCC. We should retain the test (so that we can evaluate compiler fixes), but mark it as an "expected fail". The rest of the kernel source will be adjusted to avoid this corner case. Also disable -Wswitch-unreachable for the test so that the intentionally broken code won't trigger warnings for GCC (nor future Clang) when initialization happens this unhandled place. [1] https://bugs.llvm.org/show_bug.cgi?id=44916 Suggested-by: Alexander Potapenko <glider@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jann Horn <jannh@google.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Link: http://lkml.kernel.org/r/202002191358.2897A07C6@keescook Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07lib/scatterlist: fix sg_copy_buffer() kerneldocGeert Uytterhoeven1-1/+1
Add the missing closing parenthesis to the description for the to_buffer parameter of sg_copy_buffer(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Akinobu Mita <akinobu.mita@gmail.com Link: http://lkml.kernel.org/r/20200212084241.8778-1-geert+renesas@glider.be Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07lib/ts_kmp.c: replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertenly introduced[3] to the codebase from now on. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20200211205948.GA26459@embeddedor Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07lib/ts_fsm.c: replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertenly introduced[3] to the codebase from now on. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20200211205813.GA25602@embeddedor Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07lib/ts_bm.c: replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertenly introduced[3] to the codebase from now on. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20200211205620.GA24694@embeddedor Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07lib/bch.c: replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertenly introduced[3] to the codebase from now on. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20200211205119.GA21234@embeddedor Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07lib/test_lockup.c: add parameters for locking generic vfs locksKonstantin Khlebnikov1-0/+45
file_path=<path> defines file or directory to open lock_inode=Y set lock_rwsem_ptr to inode->i_rwsem lock_mapping=Y set lock_rwsem_ptr to mapping->i_mmap_rwsem lock_sb_umount=Y set lock_rwsem_ptr to sb->s_umount This gives safe and simple way to see how system reacts to contention of common vfs locks and how syscalls depend on them directly or indirectly. For example to block s_umount for 60 seconds: # modprobe test_lockup file_path=. lock_sb_umount time_secs=60 state=S This is useful for checking/testing scalability issues like this: https://lore.kernel.org/lkml/158497590858.7371.9311902565121473436.stgit@buzz/ Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Colin Ian King <colin.king@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Sasha Levin <sashal@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/158498153964.5621.83061779039255681.stgit@buzz Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07lib/test_lockup.c: fix spelling mistake "iteraions" -> "iterations"Colin Ian King1-1/+1
There is a spelling mistake in a pr_notice message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Kees Cook <keescook@chromium.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Sasha Levin <sashal@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20200221155145.79522-1-colin.king@canonical.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07lib/test_lockup: test module to generate lockupsKonstantin Khlebnikov3-0/+567
CONFIG_TEST_LOCKUP=m adds module "test_lockup" that helps to make sure that watchdogs and lockup detectors are working properly. Depending on module parameters test_lockup could emulate soft or hard lockup, "hung task", hold arbitrary lock, allocate bunch of pages. Also it could generate series of lockups with cooling-down periods, in this way it could be used as "ping" for locks or page allocator. Loop checks signals between iteration thus could be stopped by ^C. # modinfo test_lockup ... parm: time_secs:lockup time in seconds, default 0 (uint) parm: time_nsecs:nanoseconds part of lockup time, default 0 (uint) parm: cooldown_secs:cooldown time between iterations in seconds, default 0 (uint) parm: cooldown_nsecs:nanoseconds part of cooldown, default 0 (uint) parm: iterations:lockup iterations, default 1 (uint) parm: all_cpus:trigger lockup at all cpus at once (bool) parm: state:wait in 'R' running (default), 'D' uninterruptible, 'K' killable, 'S' interruptible state (charp) parm: use_hrtimer:use high-resolution timer for sleeping (bool) parm: iowait:account sleep time as iowait (bool) parm: lock_read:lock read-write locks for read (bool) parm: lock_single:acquire locks only at one cpu (bool) parm: reacquire_locks:release and reacquire locks/irq/preempt between iterations (bool) parm: touch_softlockup:touch soft-lockup watchdog between iterations (bool) parm: touch_hardlockup:touch hard-lockup watchdog between iterations (bool) parm: call_cond_resched:call cond_resched() between iterations (bool) parm: measure_lock_wait:measure lock wait time (bool) parm: lock_wait_threshold:print lock wait time longer than this in nanoseconds, default off (ulong) parm: disable_irq:disable interrupts: generate hard-lockups (bool) parm: disable_softirq:disable bottom-half irq handlers (bool) parm: disable_preempt:disable preemption: generate soft-lockups (bool) parm: lock_rcu:grab rcu_read_lock: generate rcu stalls (bool) parm: lock_mmap_sem:lock mm->mmap_sem: block procfs interfaces (bool) parm: lock_rwsem_ptr:lock rw_semaphore at address (ulong) parm: lock_mutex_ptr:lock mutex at address (ulong) parm: lock_spinlock_ptr:lock spinlock at address (ulong) parm: lock_rwlock_ptr:lock rwlock at address (ulong) parm: alloc_pages_nr:allocate and free pages under locks (uint) parm: alloc_pages_order:page order to allocate (uint) parm: alloc_pages_gfp:allocate pages with this gfp_mask, default GFP_KERNEL (uint) parm: alloc_pages_atomic:allocate pages with GFP_ATOMIC (bool) parm: reallocate_pages:free and allocate pages between iterations (bool) Parameters for locking by address are unsafe and taints kernel. With CONFIG_DEBUG_SPINLOCK=y they at least check magics for embedded spinlocks. Examples: task hang in D-state: modprobe test_lockup time_secs=1 iterations=60 state=D task hang in io-wait D-state: modprobe test_lockup time_secs=1 iterations=60 state=D iowait softlockup: modprobe test_lockup time_secs=1 iterations=60 state=R hardlockup: modprobe test_lockup time_secs=1 iterations=60 state=R disable_irq system-wide hardlockup: modprobe test_lockup time_secs=1 iterations=60 state=R \ disable_irq all_cpus rcu stall: modprobe test_lockup time_secs=1 iterations=60 state=R \ lock_rcu touch_softlockup lock mmap_sem / block procfs interfaces: modprobe test_lockup time_secs=1 iterations=60 state=S lock_mmap_sem lock tasklist_lock for read / block forks: TASKLIST_LOCK=$(awk '$3 == "tasklist_lock" {print "0x"$1}' /proc/kallsyms) modprobe test_lockup time_secs=1 iterations=60 state=R \ disable_irq lock_read lock_rwlock_ptr=$TASKLIST_LOCK lock namespace_sem / block vfs mount operations: NAMESPACE_SEM=$(awk '$3 == "namespace_sem" {print "0x"$1}' /proc/kallsyms) modprobe test_lockup time_secs=1 iterations=60 state=S \ lock_rwsem_ptr=$NAMESPACE_SEM lock cgroup mutex / block cgroup operations: CGROUP_MUTEX=$(awk '$3 == "cgroup_mutex" {print "0x"$1}' /proc/kallsyms) modprobe test_lockup time_secs=1 iterations=60 state=S \ lock_mutex_ptr=$CGROUP_MUTEX ping cgroup_mutex every second and measure maximum lock wait time: modprobe test_lockup cooldown_secs=1 iterations=60 state=S \ lock_mutex_ptr=$CGROUP_MUTEX reacquire_locks measure_lock_wait [linux@roeck-us.net: rename disable_irq to fix build error] Link: http://lkml.kernel.org/r/20200317133614.23152-1-linux@roeck-us.net Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru Cc: Colin Ian King <colin.king@canonical.com> Cc: Guenter Roeck <linux@roeck-us.net> Link: http://lkml.kernel.org/r/158132859146.2797.525923171323227836.stgit@buzz Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07compiler: remove CONFIG_OPTIMIZE_INLINING entirelyMasahiro Yamada1-12/+0
Commit ac7c3e4ff401 ("compiler: enable CONFIG_OPTIMIZE_INLINING forcibly") made this always-on option. We released v5.4 and v5.5 including that commit. Remove the CONFIG option and clean up the code now. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: David Miller <davem@davemloft.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20200220110807.32534-2-masahiroy@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-05Merge tag 'trace-v5.7' of ↵Linus Torvalds1-9/+26
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "New tracing features: - The ring buffer is no longer disabled when reading the trace file. The trace_pipe file was made to be used for live tracing and reading as it acted like the normal producer/consumer. As the trace file would not consume the data, the easy way of handling it was to just disable writes to the ring buffer. This came to a surprise to the BPF folks who complained about lost events due to reading. This is no longer an issue. If someone wants to keep the old disabling there's a new option "pause-on-trace" that can be set. - New set_ftrace_notrace_pid file. PIDs in this file will not be traced by the function tracer. Similar to set_ftrace_pid, which makes the function tracer only trace those tasks with PIDs in the file, the set_ftrace_notrace_pid does the reverse. - New set_event_notrace_pid file. PIDs in this file will cause events not to be traced if triggered by a task with a matching PID. Similar to the set_event_pid file but will not be traced. Note, sched_waking and sched_switch events may still be traced if one of the tasks referenced by those events contains a PID that is allowed to be traced. Tracing related features: - New bootconfig option, that is attached to the initrd file. If bootconfig is on the command line, then the initrd file is searched looking for a bootconfig appended at the end. - New GPU tracepoint infrastructure to help the gfx drivers to get off debugfs (acked by Greg Kroah-Hartman) And other minor updates and fixes" * tag 'trace-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits) tracing: Do not allocate buffer in trace_find_next_entry() in atomic tracing: Add documentation on set_ftrace_notrace_pid and set_event_notrace_pid selftests/ftrace: Add test to test new set_event_notrace_pid file selftests/ftrace: Add test to test new set_ftrace_notrace_pid file tracing: Create set_event_notrace_pid to not trace tasks ftrace: Create set_ftrace_notrace_pid to not trace tasks ftrace: Make function trace pid filtering a bit more exact ftrace/kprobe: Show the maxactive number on kprobe_events tracing: Have the document reflect that the trace file keeps tracing enabled ring-buffer/tracing: Have iterator acknowledge dropped events tracing: Do not disable tracing when reading the trace file ring-buffer: Do not disable recording when there is an iterator ring-buffer: Make resize disable per cpu buffer instead of total buffer ring-buffer: Optimize rb_iter_head_event() ring-buffer: Do not die if rb_iter_peek() fails more than thrice ring-buffer: Have rb_iter_head_event() handle concurrent writer ring-buffer: Add page_stamp to iterator for synchronization ring-buffer: Rename ring_buffer_read() to read_buffer_iter_advance() ring-buffer: Have ring_buffer_empty() not depend on tracing stopped tracing: Save off entry when peeking at next entry ...
2020-04-03Merge tag 'char-misc-5.7-rc1' of ↵Linus Torvalds2-8/+27
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc/other driver patches for 5.7-rc1. Lots of things in here, and it's later than expected due to some reverts to resolve some reported issues. All is now clean with no reported problems in linux-next. Included in here is: - interconnect updates - mei driver updates - uio updates - nvmem driver updates - soundwire updates - binderfs updates - coresight updates - habanalabs updates - mhi new bus type and core - extcon driver updates - some Kconfig cleanups - other small misc driver cleanups and updates As mentioned, all have been in linux-next for a while, and with the last two reverts, all is calm and good" * tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits) Revert "driver core: platform: Initialize dma_parms for platform devices" Revert "amba: Initialize dma_parms for amba devices" amba: Initialize dma_parms for amba devices driver core: platform: Initialize dma_parms for platform devices bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device() bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture bus: mhi: core: Add support for reading MHI info from device misc: rtsx: set correct pcr_ops for rts522A speakup: misc: Use dynamic minor numbers for speakup devices mei: me: add cedar fork device ids coresight: do not use the BIT() macro in the UAPI header Documentation: provide IBM contacts for embargoed hardware nvmem: core: remove nvmem_sysfs_get_groups() nvmem: core: use is_bin_visible for permissions nvmem: core: use device_register and device_unregister nvmem: core: add root_only member to nvmem device struct extcon: axp288: Add wakeup support extcon: Mark extcon_get_edev_name() function as exported symbol extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format ...
2020-04-03Merge tag 'spdx-5.7-rc1' of ↵Linus Torvalds2-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here are three SPDX patches for 5.7-rc1. One fixes up the SPDX tag for a single driver, while the other two go through the tree and add SPDX tags for all of the .gitignore files as needed. Nothing too complex, but you will get a merge conflict with your current tree, that should be trivial to handle (one file modified by two things, one file deleted.) All three of these have been in linux-next for a while, with no reported issues other than the merge conflict" * tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: ASoC: MT6660: make spdxcheck.py happy .gitignore: add SPDX License Identifier .gitignore: remove too obvious comments
2020-04-03kbuild, btf: Fix dependencies for DEBUG_INFO_BTFSlava Bacherikov1-0/+2
Currently turning on DEBUG_INFO_SPLIT when DEBUG_INFO_BTF is also enabled will produce invalid btf file, since gen_btf function in link-vmlinux.sh script doesn't handle *.dwo files. Enabling DEBUG_INFO_REDUCED will also produce invalid btf file, and using GCC_PLUGIN_RANDSTRUCT with BTF makes no sense. Fixes: e83b9f55448a ("kbuild: add ability to generate BTF type info for vmlinux") Reported-by: Jann Horn <jannh@google.com> Reported-by: Liu Yiding <liuyd.fnst@cn.fujitsu.com> Signed-off-by: Slava Bacherikov <slava@bacher09.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: KP Singh <kpsingh@google.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200402204138.408021-1-slava@bacher09.org
2020-04-03Merge branch 'for-5.7' of ↵Linus Torvalds1-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu Pull percpu updates from Dennis Zhou: "This is just a few documentation fixes for percpu refcount and bitmap helpers that went in v5.6, and moving my emails to all be at korg" * 'for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu: percpu: update copyright emails to dennis@kernel.org include/bitmap.h: add new functions to documentation include/bitmap.h: add missing parameter in docs percpu_ref: Fix comment regarding percpu_ref_init flags
2020-04-02Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-0/+19
Merge updates from Andrew Morton: "A large amount of MM, plenty more to come. Subsystems affected by this patch series: - tools - kthread - kbuild - scripts - ocfs2 - vfs - mm: slub, kmemleak, pagecache, gup, swap, memcg, pagemap, mremap, sparsemem, kasan, pagealloc, vmscan, compaction, mempolicy, hugetlbfs, hugetlb" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (155 commits) include/linux/huge_mm.h: check PageTail in hpage_nr_pages even when !THP mm/hugetlb: fix build failure with HUGETLB_PAGE but not HUGEBTLBFS selftests/vm: fix map_hugetlb length used for testing read and write mm/hugetlb: remove unnecessary memory fetch in PageHeadHuge() mm/hugetlb.c: clean code by removing unnecessary initialization hugetlb_cgroup: add hugetlb_cgroup reservation docs hugetlb_cgroup: add hugetlb_cgroup reservation tests hugetlb: support file_region coalescing again hugetlb_cgroup: support noreserve mappings hugetlb_cgroup: add accounting for shared mappings hugetlb: disable region_add file_region coalescing hugetlb_cgroup: add reservation accounting for private mappings mm/hugetlb_cgroup: fix hugetlb_cgroup migration hugetlb_cgroup: add interface for charge/uncharge hugetlb reservations hugetlb_cgroup: add hugetlb_cgroup reservation counter hugetlbfs: Use i_mmap_rwsem to address page fault/truncate race hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization mm/memblock.c: remove redundant assignment to variable max_addr mm: mempolicy: require at least one nodeid for MPOL_PREFERRED mm: mempolicy: use VM_BUG_ON_VMA in queue_pages_test_walk() ...
2020-04-02kasan: add test for invalid size in memmoveWalter Wu1-0/+19
Test negative size in memmove in order to verify whether it correctly get KASAN report. Casting negative numbers to size_t would indeed turn up as a large size_t, so it will have out-of-bounds bug and be detected by KASAN. [walter-zh.wu@mediatek.com: fix -Wstringop-overflow warning] Link: http://lkml.kernel.org/r/20200311134244.13016-1-walter-zh.wu@mediatek.com Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: kernel test robot <lkp@intel.com> Link: http://lkml.kernel.org/r/20191112065313.7060-1-walter-zh.wu@mediatek.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02Merge tag 'xarray-5.7' of git://git.infradead.org/users/willy/linux-daxLinus Torvalds3-11/+61
Pull XArray updates from Matthew Wilcox: - Fix two bugs which affected multi-index entries larger than 2^26 indices - Fix some documentation - Remove unused IDA macros - Add a small optimisation for tiny configurations - Fix a bug which could cause an RCU walker to terminate a marked walk early * tag 'xarray-5.7' of git://git.infradead.org/users/willy/linux-dax: xarray: Fix early termination of xas_for_each_marked radix tree test suite: Support kmem_cache alignment XArray: Optimise xas_sibling() if !CONFIG_XARRAY_MULTI ida: remove abandoned macros XArray: Fix incorrect comment in header file XArray: Fix xas_pause for large multi-index entries XArray: Fix xa_find_next for large multi-index entries
2020-04-02Merge tag 'linux-kselftest-kunit-5.7-rc1' of ↵Linus Torvalds8-75/+358
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit updates from Shuah Khan: "This kunit update consists of: - debugfs support for displaying kunit test suite results. This is especially useful for module-loaded tests to allow disentangling of test result display from other dmesg events. CONFIG_KUNIT_DEBUGFS enables/disables the debugfs support. - Several fixes and improvements to kunit framework and tool" * tag 'linux-kselftest-kunit-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: tool: add missing test data file content kunit: update documentation to describe debugfs representation kunit: subtests should be indented 4 spaces according to TAP kunit: add log test kunit: add debugfs /sys/kernel/debug/kunit/<suite>/results display Documentation: kunit: Make the KUnit documentation less UML-specific Fix linked-list KUnit test when run multiple times kunit: kunit_tool: Allow .kunitconfig to disable config items kunit: Always print actual pointer values in asserts kunit: add --make_options kunit: Run all KUnit tests through allyesconfig kunit: kunit_parser: make parser more robust
2020-04-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds2-4/+4
Pull networking updates from David Miller: "Highlights: 1) Fix the iwlwifi regression, from Johannes Berg. 2) Support BSS coloring and 802.11 encapsulation offloading in hardware, from John Crispin. 3) Fix some potential Spectre issues in qtnfmac, from Sergey Matyukevich. 4) Add TTL decrement action to openvswitch, from Matteo Croce. 5) Allow paralleization through flow_action setup by not taking the RTNL mutex, from Vlad Buslov. 6) A lot of zero-length array to flexible-array conversions, from Gustavo A. R. Silva. 7) Align XDP statistics names across several drivers for consistency, from Lorenzo Bianconi. 8) Add various pieces of infrastructure for offloading conntrack, and make use of it in mlx5 driver, from Paul Blakey. 9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki. 10) Lots of parallelization improvements during configuration changes in mlxsw driver, from Ido Schimmel. 11) Add support to devlink for generic packet traps, which report packets dropped during ACL processing. And use them in mlxsw driver. From Jiri Pirko. 12) Support bcmgenet on ACPI, from Jeremy Linton. 13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei Starovoitov, and your's truly. 14) Support XDP meta-data in virtio_net, from Yuya Kusakabe. 15) Fix sysfs permissions when network devices change namespaces, from Christian Brauner. 16) Add a flags element to ethtool_ops so that drivers can more simply indicate which coalescing parameters they actually support, and therefore the generic layer can validate the user's ethtool request. Use this in all drivers, from Jakub Kicinski. 17) Offload FIFO qdisc in mlxsw, from Petr Machata. 18) Support UDP sockets in sockmap, from Lorenz Bauer. 19) Fix stretch ACK bugs in several TCP congestion control modules, from Pengcheng Yang. 20) Support virtual functiosn in octeontx2 driver, from Tomasz Duszynski. 21) Add region operations for devlink and use it in ice driver to dump NVM contents, from Jacob Keller. 22) Add support for hw offload of MACSEC, from Antoine Tenart. 23) Add support for BPF programs that can be attached to LSM hooks, from KP Singh. 24) Support for multiple paths, path managers, and counters in MPTCP. From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti, and others. 25) More progress on adding the netlink interface to ethtool, from Michal Kubecek" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits) net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline cxgb4/chcr: nic-tls stats in ethtool net: dsa: fix oops while probing Marvell DSA switches net/bpfilter: remove superfluous testing message net: macb: Fix handling of fixed-link node net: dsa: ksz: Select KSZ protocol tag netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write net: stmmac: add EHL 2.5Gbps PCI info and PCI ID net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID net: stmmac: create dwmac-intel.c to contain all Intel platform net: dsa: bcm_sf2: Support specifying VLAN tag egress rule net: dsa: bcm_sf2: Add support for matching VLAN TCI net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT net: dsa: bcm_sf2: Disable learning for ASP port net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge net: dsa: b53: Prevent tagged VLAN on port 7 for 7278 net: dsa: b53: Restore VLAN entries upon (re)configuration net: dsa: bcm_sf2: Fix overflow checks hv_netvsc: Remove unnecessary round_up for recv_completion_cnt ...
2020-04-01Merge tag 'tty-5.7-rc1' of ↵Linus Torvalds1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the big set of TTY / Serial patches for 5.7-rc1 Lots of console fixups and reworking in here, serial core tweaks (doesn't that ever get old, why are we still creating new serial devices?), serial driver updates, line-protocol driver updates, and some vt cleanups and fixes included in here as well. All have been in linux-next with no reported issues" * tag 'tty-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (161 commits) serial: 8250: Optimize irq enable after console write serial: 8250: Fix rs485 delay after console write vt: vt_ioctl: fix use-after-free in vt_in_use() vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console tty: serial: make SERIAL_SPRD depend on COMMON_CLK tty: serial: fsl_lpuart: fix return value checking tty: serial: fsl_lpuart: move dma_request_chan() ARM: dts: tango4: Make /serial compatible with ns16550a ARM: dts: mmp*: Make the serial ports compatible with xscale-uart ARM: dts: mmp*: Fix serial port names ARM: dts: mmp2-brownstone: Don't redeclare phandle references ARM: dts: pxa*: Make the serial ports compatible with xscale-uart ARM: dts: pxa*: Fix serial port names ARM: dts: pxa*: Don't redeclare phandle references serial: omap: drop unused dt-bindings header serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs serial: 8250: 8250_omap: Work around errata causing spurious IRQs with DMA serial: 8250: 8250_omap: Extend driver data to pass FIFO trigger info serial: 8250: 8250_omap: Move locking out from __dma_rx_do_complete() serial: 8250: 8250_omap: Account for data in flight during DMA teardown ...
2020-04-01Merge tag 'kbuild-v5.7' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: "Build system: - add CONFIG_UNUSED_KSYMS_WHITELIST, which will be useful to define a fixed set of export symbols for Generic Kernel Image (GKI) - allow to run 'make dt_binding_check' without .config - use full schema for checking DT examples in *.yaml files - make modpost fail for missing MODULE_IMPORT_NS(), which makes more sense because we know the produced modules are never loadable - Remove unused 'AS' variable Kconfig: - sanitize DEFCONFIG_LIST, and remove ARCH_DEFCONFIG from Kconfig files - relax the 'imply' behavior so that symbols implied by 'y' can become 'm' - make 'imply' obey 'depends on' in order to make 'imply' really weak Misc: - add documentation on building the kernel with Clang/LLVM - revive __HAVE_ARCH_STRLEN for 32bit sparc to use optimized strlen() - fix warning from deb-pkg builds when CONFIG_DEBUG_INFO=n - various script and Makefile cleanups" * tag 'kbuild-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits) Makefile: Update kselftest help information kbuild: deb-pkg: fix warning when CONFIG_DEBUG_INFO is unset kbuild: add outputmakefile to no-dot-config-targets kbuild: remove AS variable net: wan: wanxl: refactor the firmware rebuild rule net: wan: wanxl: use $(M68KCC) instead of $(M68KAS) for rebuilding firmware net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmware kbuild: add comment about grouped target kbuild: add -Wall to KBUILD_HOSTCXXFLAGS kconfig: remove unused variable in qconf.cc sparc: revive __HAVE_ARCH_STRLEN for 32bit sparc kbuild: refactor Makefile.dtbinst more kbuild: compute the dtbs_install destination more simply Makefile: disallow data races on gcc-10 as well kconfig: make 'imply' obey the direct dependency kconfig: allow symbols implied by y to become m net: drop_monitor: use IS_REACHABLE() to guard net_dm_hw_report() modpost: return error if module is missing ns imports and MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n modpost: rework and consolidate logging interface kbuild: allow to run dt_binding_check without kernel configuration ...
2020-03-31Merge tag 'for-5.7-tag' of ↵Linus Torvalds1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs updates from David Sterba: "A number of core changes that make things work better in general, code is simpler and cleaner. Core changes: - per-inode file extent tree, for in memory tracking of contiguous extent ranges to make sure i_size adjustments are accurate - tree root structures are protected by reference counts, replacing SRCU that did not cover some cases - leak detector for tree root structures - per-transaction pinned extent tracking - buffer heads are replaced by bios for super block access - speedup of extent back reference resolution, on an example test scenario the runtime of send went down from a hour to minutes - factor out locking scheme used for subvolume writer and NOCOW exclusion, abstracted as DREW lock, double reader-writer exclusion (allow either readers or writers) - cleanup and abstract extent allocation policies, preparation for zoned device support - make reflink/clone_range work on inline extents - add more cancellation point for relocation, improves long response from 'balance cancel' - add page migration callback for data pages - switch to guid for uuids, with additional cleanups of the interface - make ranged full fsyncs more efficient - removal of obsolete ioctl flag BTRFS_SUBVOL_CREATE_ASYNC - remove b-tree readahead from delayed refs paths, avoiding seek and read unnecessary blocks Features: - v2 of ioctl to delete subvolumes, allowing to delete by id and more future extensions Fixes: - fix qgroup rescan worker that could block umount - fix crash during unmount due to race with delayed inode workers - fix dellaloc flushing logic that could create unnecessary chunks under heavy load - fix missing file extent item for hole after ranged fsync - several fixes in relocation error handling Other: - more documentation of relocation, device replace, space reservations - many random cleanups" * tag 'for-5.7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (210 commits) btrfs: fix missing semaphore unlock in btrfs_sync_file btrfs: use nofs allocations for running delayed items btrfs: sysfs: Use scnprintf() instead of snprintf() btrfs: do not resolve backrefs for roots that are being deleted btrfs: track reloc roots based on their commit root bytenr btrfs: restart relocate_tree_blocks properly btrfs: reloc: reorder reservation before root selection btrfs: do not readahead in build_backref_tree btrfs: do not use readahead for running delayed refs btrfs: Remove async_transid from btrfs_mksubvol/create_subvol/create_snapshot btrfs: Remove transid argument from btrfs_ioctl_snap_create_transid btrfs: Remove BTRFS_SUBVOL_CREATE_ASYNC support btrfs: kill the subvol_srcu btrfs: make btrfs_cleanup_fs_roots use the radix tree lock btrfs: don't take an extra root ref at allocation time btrfs: hold a ref on the root on the dead roots list btrfs: make inodes hold a ref on their roots btrfs: move the root freeing stuff into btrfs_put_root btrfs: move ino_cache_inode dropping out of btrfs_free_fs_root btrfs: make the extent buffer leak check per fs info ...
2020-03-31Merge tag 'timers-core-2020-03-30' of ↵Linus Torvalds1-53/+100
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timekeeping and timer updates from Thomas Gleixner: "Core: - Consolidation of the vDSO build infrastructure to address the difficulties of cross-builds for ARM64 compat vDSO libraries by restricting the exposure of header content to the vDSO build. This is achieved by splitting out header content into separate headers. which contain only the minimaly required information which is necessary to build the vDSO. These new headers are included from the kernel headers and the vDSO specific files. - Enhancements to the generic vDSO library allowing more fine grained control over the compiled in code, further reducing architecture specific storage and preparing for adopting the generic library by PPC. - Cleanup and consolidation of the exit related code in posix CPU timers. - Small cleanups and enhancements here and there Drivers: - The obligatory new drivers: Ingenic JZ47xx and X1000 TCU support - Correct the clock rate of PIT64b global clock - setup_irq() cleanup - Preparation for PWM and suspend support for the TI DM timer - Expand the fttmr010 driver to support ast2600 systems - The usual small fixes, enhancements and cleanups all over the place" * tag 'timers-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (80 commits) Revert "clocksource/drivers/timer-probe: Avoid creating dead devices" vdso: Fix clocksource.h macro detection um: Fix header inclusion arm64: vdso32: Enable Clang Compilation lib/vdso: Enable common headers arm: vdso: Enable arm to use common headers x86/vdso: Enable x86 to use common headers mips: vdso: Enable mips to use common headers arm64: vdso32: Include common headers in the vdso library arm64: vdso: Include common headers in the vdso library arm64: Introduce asm/vdso/processor.h arm64: vdso32: Code clean up linux/elfnote.h: Replace elf.h with UAPI equivalent scripts: Fix the inclusion order in modpost common: Introduce processor.h linux/ktime.h: Extract common header for vDSO linux/jiffies.h: Extract common header for vDSO linux/time64.h: Extract common header for vDSO linux/time32.h: Extract common header for vDSO linux/time.h: Extract common header for vDSO ...
2020-03-31Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-0/+29
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main changes in this cycle are: - Various NUMA scheduling updates: harmonize the load-balancer and NUMA placement logic to not work against each other. The intended result is better locality, better utilization and fewer migrations. - Introduce Thermal Pressure tracking and optimizations, to improve task placement on thermally overloaded systems. - Implement frequency invariant scheduler accounting on (some) x86 CPUs. This is done by observing and sampling the 'recent' CPU frequency average at ~tick boundaries. The CPU provides this data via the APERF/MPERF MSRs. This hopefully makes our capacity estimates more precise and keeps tasks on the same CPU better even if it might seem overloaded at a lower momentary frequency. (As usual, turbo mode is a complication that we resolve by observing the maximum frequency and renormalizing to it.) - Add asymmetric CPU capacity wakeup scan to improve capacity utilization on asymmetric topologies. (big.LITTLE systems) - PSI fixes and optimizations. - RT scheduling capacity awareness fixes & improvements. - Optimize the CONFIG_RT_GROUP_SCHED constraints code. - Misc fixes, cleanups and optimizations - see the changelog for details" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits) threads: Update PID limit comment according to futex UAPI change sched/fair: Fix condition of avg_load calculation sched/rt: cpupri_find: Trigger a full search as fallback kthread: Do not preempt current task if it is going to call schedule() sched/fair: Improve spreading of utilization sched: Avoid scale real weight down to zero psi: Move PF_MEMSTALL out of task->flags MAINTAINERS: Add maintenance information for psi psi: Optimize switching tasks inside shared cgroups psi: Fix cpu.pressure for cpu.max and competing cgroups sched/core: Distribute tasks within affinity masks sched/fair: Fix enqueue_task_fair warning thermal/cpu-cooling, sched/core: Move the arch_set_thermal_pressure() API to generic scheduler code sched/rt: Remove unnecessary push for unfit tasks sched/rt: Allow pulling unfitting task sched/rt: Optimize cpupri_find() on non-heterogenous systems sched/rt: Re-instate old behavior in select_task_rq_rt() sched/rt: cpupri_find: Implement fallback mechanism for !fit case sched/fair: Fix reordering of enqueue/dequeue_task_fair() sched/fair: Fix runnable_avg for throttled cfs ...
2020-03-31Merge branch 'perf-core-for-linus' of ↵Linus Torvalds3-0/+205
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The main changes in this cycle were: Kernel side changes: - A couple of x86/cpu cleanups and changes were grandfathered in due to patch dependencies. These clean up the set of CPU model/family matching macros with a consistent namespace and C99 initializer style. - A bunch of updates to various low level PMU drivers: * AMD Family 19h L3 uncore PMU * Intel Tiger Lake uncore support * misc fixes to LBR TOS sampling - optprobe fixes - perf/cgroup: optimize cgroup event sched-in processing - misc cleanups and fixes Tooling side changes are to: - perf {annotate,expr,record,report,stat,test} - perl scripting - libapi, libperf and libtraceevent - vendor events on Intel and S390, ARM cs-etm - Intel PT updates - Documentation changes and updates to core facilities - misc cleanups, fixes and other enhancements" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (89 commits) cpufreq/intel_pstate: Fix wrong macro conversion x86/cpu: Cleanup the now unused CPU match macros hwrng: via_rng: Convert to new X86 CPU match macros crypto: Convert to new CPU match macros ASoC: Intel: Convert to new X86 CPU match macros powercap/intel_rapl: Convert to new X86 CPU match macros PCI: intel-mid: Convert to new X86 CPU match macros mmc: sdhci-acpi: Convert to new X86 CPU match macros intel_idle: Convert to new X86 CPU match macros extcon: axp288: Convert to new X86 CPU match macros thermal: Convert to new X86 CPU match macros hwmon: Convert to new X86 CPU match macros platform/x86: Convert to new CPU match macros EDAC: Convert to new X86 CPU match macros cpufreq: Convert to new X86 CPU match macros ACPI: Convert to new X86 CPU match macros x86/platform: Convert to new CPU match macros x86/kernel: Convert to new CPU match macros x86/kvm: Convert to new CPU match macros x86/perf/events: Convert to new CPU match macros ...
2020-03-31Merge branch 'locking-core-for-linus' of ↵Linus Torvalds1-0/+17
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "The main changes in this cycle were: - Continued user-access cleanups in the futex code. - percpu-rwsem rewrite that uses its own waitqueue and atomic_t instead of an embedded rwsem. This addresses a couple of weaknesses, but the primary motivation was complications on the -rt kernel. - Introduce raw lock nesting detection on lockdep (CONFIG_PROVE_RAW_LOCK_NESTING=y), document the raw_lock vs. normal lock differences. This too originates from -rt. - Reuse lockdep zapped chain_hlocks entries, to conserve RAM footprint on distro-ish kernels running into the "BUG: MAX_LOCKDEP_CHAIN_HLOCKS too low!" depletion of the lockdep chain-entries pool. - Misc cleanups, smaller fixes and enhancements - see the changelog for details" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits) fs/buffer: Make BH_Uptodate_Lock bit_spin_lock a regular spinlock_t thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t Documentation/locking/locktypes: Minor copy editor fixes Documentation/locking/locktypes: Further clarifications and wordsmithing m68knommu: Remove mm.h include from uaccess_no.h x86: get rid of user_atomic_cmpxchg_inatomic() generic arch_futex_atomic_op_inuser() doesn't need access_ok() x86: don't reload after cmpxchg in unsafe_atomic_op2() loop x86: convert arch_futex_atomic_op_inuser() to user_access_begin/user_access_end() objtool: whitelist __sanitizer_cov_trace_switch() [parisc, s390, sparc64] no need for access_ok() in futex handling sh: no need of access_ok() in arch_futex_atomic_op_inuser() futex: arch_futex_atomic_op_inuser() calling conventions change completion: Use lockdep_assert_RT_in_threaded_ctx() in complete_all() lockdep: Add posixtimer context tracing bits lockdep: Annotate irq_work lockdep: Add hrtimer context tracing bits lockdep: Introduce wait-type checks completion: Use simple wait queues sched/swait: Prepare usage in completions ...
2020-03-30Merge tag 'driver-core-5.7-rc1' of ↵Linus Torvalds1-0/+55
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the "big" set of driver core changes for 5.7-rc1. Nothing huge in here, just lots of little firmware core changes and use of new apis, a libfs fix, a debugfs api change, and some driver core deferred probe rework. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (44 commits) Revert "driver core: Set fw_devlink to "permissive" behavior by default" driver core: Set fw_devlink to "permissive" behavior by default driver core: Replace open-coded list_last_entry() driver core: Read atomic counter once in driver_probe_done() libfs: fix infoleak in simple_attr_read() driver core: Add device links from fwnode only for the primary device platform/x86: touchscreen_dmi: Add info for the Chuwi Vi8 Plus tablet platform/x86: touchscreen_dmi: Add EFI embedded firmware info support Input: icn8505 - Switch to firmware_request_platform for retreiving the fw Input: silead - Switch to firmware_request_platform for retreiving the fw selftests: firmware: Add firmware_request_platform tests test_firmware: add support for firmware_request_platform firmware: Add new platform fallback mechanism and firmware_request_platform() Revert "drivers: base: power: wakeup.c: Use built-in RCU list checking" drivers: base: power: wakeup.c: Use built-in RCU list checking component: allow missing unbind callback debugfs: remove return value of debugfs_create_file_size() debugfs: Check module state before warning in {full/open}_proxy_open() firmware: fix a double abort case with fw_load_sysfs_fallback arch_topology: Fix putting invalid cpu clk ...
2020-03-26kunit: subtests should be indented 4 spaces according to TAPAlan Maguire2-42/+44
Introduce KUNIT_SUBTEST_INDENT macro which corresponds to 4-space indentation and KUNIT_SUBSUBTEST_INDENT macro which corresponds to 8-space indentation in line with TAP spec (e.g. see "Subtests" section of https://node-tap.org/tap-protocol/). Use these macros in place of one or two tabs in strings to clarify why we are indenting. Suggested-by: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-03-26kunit: add log testAlan Maguire1-1/+39
the logging test ensures multiple strings logged appear in the log string associated with the test when CONFIG_KUNIT_DEBUGFS is enabled. Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-03-26kunit: add debugfs /sys/kernel/debug/kunit/<suite>/results displayAlan Maguire6-33/+276
add debugfs support for displaying kunit test suite results; this is especially useful for module-loaded tests to allow disentangling of test result display from other dmesg events. debugfs support is provided if CONFIG_KUNIT_DEBUGFS=y. As well as printk()ing messages, we append them to a per-test log. Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>