summaryrefslogtreecommitdiff
path: root/lib
AgeCommit message (Collapse)AuthorFilesLines
2023-05-11Merge tag 'net-6.4-rc2' of ↵Linus Torvalds3-4/+7
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from netfilter. Current release - regressions: - mtk_eth_soc: fix NULL pointer dereference Previous releases - regressions: - core: - skb_partial_csum_set() fix against transport header magic value - fix load-tearing on sk->sk_stamp in sock_recv_cmsgs(). - annotate sk->sk_err write from do_recvmmsg() - add vlan_get_protocol_and_depth() helper - netlink: annotate accesses to nlk->cb_running - netfilter: always release netdev hooks from notifier Previous releases - always broken: - core: deal with most data-races in sk_wait_event() - netfilter: fix possible bug_on with enable_hooks=1 - eth: bonding: fix send_peer_notif overflow - eth: xpcs: fix incorrect number of interfaces - eth: ipvlan: fix out-of-bounds caused by unclear skb->cb - eth: stmmac: Initialize MAC_ONEUS_TIC_COUNTER register" * tag 'net-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (31 commits) af_unix: Fix data races around sk->sk_shutdown. af_unix: Fix a data race of sk->sk_receive_queue->qlen. net: datagram: fix data-races in datagram_poll() net: mscc: ocelot: fix stat counter register values ipvlan:Fix out-of-bounds caused by unclear skb->cb docs: networking: fix x25-iface.rst heading & index order gve: Remove the code of clearing PBA bit tcp: add annotations around sk->sk_shutdown accesses net: add vlan_get_protocol_and_depth() helper net: pcs: xpcs: fix incorrect number of interfaces net: deal with most data-races in sk_wait_event() net: annotate sk->sk_err write from do_recvmmsg() netlink: annotate accesses to nlk->cb_running kselftest: bonding: add num_grat_arp test selftests: forwarding: lib: add netns support for tc rule handle stats get Documentation: bonding: fix the doc of peer_notif_delay bonding: fix send_peer_notif overflow net: ethernet: mtk_eth_soc: fix NULL pointer dereference selftests: nft_flowtable.sh: check ingress/egress chain too selftests: nft_flowtable.sh: monitor result file sizes ...
2023-05-09linux/dim: Do nothing if no time delta between samplesRoy Novich3-4/+7
Add return value for dim_calc_stats. This is an indication for the caller if curr_stats was assigned by the function. Avoid using curr_stats uninitialized over {rdma/net}_dim, when no time delta between samples. Coverity reported this potential use of an uninitialized variable. Fixes: 4c4dbb4a7363 ("net/mlx5e: Move dynamic interrupt coalescing code to include/linux") Fixes: cb3c7fd4f839 ("net/mlx5e: Support adaptive RX coalescing") Signed-off-by: Roy Novich <royno@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Link: https://lore.kernel.org/r/20230507135743.138993-1-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-05-07Merge tag 'core-debugobjects-2023-05-06' of ↵Linus Torvalds1-6/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull debugobjects fix from Thomas Gleixner: "A single fix for debugobjects: The recent fix to ensure atomicity of lookup and allocation inadvertently broke the pool refill mechanism, so that debugobject OOMs now in certain situations. The reason is that the functions which got updated no longer invoke debug_objecs_init(), which is now the only place to care about refilling the tracking object pool. Restore the original behaviour by adding explicit refill opportunities to those places" * tag 'core-debugobjects-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: debugobject: Ensure pool refill (again)
2023-05-04Merge tag 'mm-stable-2023-05-03-16-22' of ↵Linus Torvalds1-2/+15
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull more MM updates from Andrew Morton: - Some DAMON cleanups from Kefeng Wang - Some KSM work from David Hildenbrand, to make the PR_SET_MEMORY_MERGE ioctl's behavior more similar to KSM's behavior. [ Andrew called these "final", but I suspect we'll have a series fixing up the fact that the last commit in the dmapools series in the previous pull seems to have unintentionally just reverted all the other commits in the same series.. - Linus ] * tag 'mm-stable-2023-05-03-16-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm: hwpoison: coredump: support recovery from dump_user_range() mm/page_alloc: add some comments to explain the possible hole in __pageblock_pfn_to_page() mm/ksm: move disabling KSM from s390/gmap code to KSM code selftests/ksm: ksm_functional_tests: add prctl unmerge test mm/ksm: unmerge and clear VM_MERGEABLE when setting PR_SET_MEMORY_MERGE=0 mm/damon/paddr: fix missing folio_sz update in damon_pa_young() mm/damon/paddr: minor refactor of damon_pa_mark_accessed_or_deactivate() mm/damon/paddr: minor refactor of damon_pa_pageout()
2023-05-03mm: hwpoison: coredump: support recovery from dump_user_range()Kefeng Wang1-2/+15
dump_user_range() is used to copy the user page to a coredump file, but if a hardware memory error occurred during copy, which called from __kernel_write_iter() in dump_user_range(), it crashes, CPU: 112 PID: 7014 Comm: mca-recover Not tainted 6.3.0-rc2 #425 pc : __memcpy+0x110/0x260 lr : _copy_from_iter+0x3bc/0x4c8 ... Call trace: __memcpy+0x110/0x260 copy_page_from_iter+0xcc/0x130 pipe_write+0x164/0x6d8 __kernel_write_iter+0x9c/0x210 dump_user_range+0xc8/0x1d8 elf_core_dump+0x308/0x368 do_coredump+0x2e8/0xa40 get_signal+0x59c/0x788 do_signal+0x118/0x1f8 do_notify_resume+0xf0/0x280 el0_da+0x130/0x138 el0t_64_sync_handler+0x68/0xc0 el0t_64_sync+0x188/0x190 Generally, the '->write_iter' of file ops will use copy_page_from_iter() and copy_page_from_iter_atomic(), change memcpy() to copy_mc_to_kernel() in both of them to handle #MC during source read, which stop coredump processing and kill the task instead of kernel panic, but the source address may not always a user address, so introduce a new copy_mc flag in struct iov_iter{} to indicate that the iter could do a safe memory copy, also introduce the helpers to set/cleck the flag, for now, it's only used in coredump's dump_user_range(), but it could expand to any other scenarios to fix the similar issue. Link: https://lkml.kernel.org/r/20230417045323.11054-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Tong Tiangen <tongtiangen@huawei.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-02debugobject: Ensure pool refill (again)Thomas Gleixner1-6/+15
The recent fix to ensure atomicity of lookup and allocation inadvertently broke the pool refill mechanism. Prior to that change debug_objects_activate() and debug_objecs_assert_init() invoked debug_objecs_init() to set up the tracking object for statically initialized objects. That's not longer the case and debug_objecs_init() is now the only place which does pool refills. Depending on the number of statically initialized objects this can be enough to actually deplete the pool, which was observed by Ido via a debugobjects OOM warning. Restore the old behaviour by adding explicit refill opportunities to debug_objects_activate() and debug_objecs_assert_init(). Fixes: 63a759694eed ("debugobject: Prevent init race with static objects") Reported-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/871qk05a9d.ffs@tglx
2023-04-30Merge tag 's390-6.4-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Add support for stackleak feature. Also allow specifying architecture-specific stackleak poison function to enable faster implementation. On s390, the mvc-based implementation helps decrease typical overhead from a factor of 3 to just 25% - Convert all assembler files to use SYM* style macros, deprecating the ENTRY() macro and other annotations. Select ARCH_USE_SYM_ANNOTATIONS - Improve KASLR to also randomize module and special amode31 code base load addresses - Rework decompressor memory tracking to support memory holes and improve error handling - Add support for protected virtualization AP binding - Add support for set_direct_map() calls - Implement set_memory_rox() and noexec module_alloc() - Remove obsolete overriding of mem*() functions for KASAN - Rework kexec/kdump to avoid using nodat_stack to call purgatory - Convert the rest of the s390 code to use flexible-array member instead of a zero-length array - Clean up uaccess inline asm - Enable ARCH_HAS_MEMBARRIER_SYNC_CORE - Convert to using CONFIG_FUNCTION_ALIGNMENT and enable DEBUG_FORCE_FUNCTION_ALIGN_64B - Resolve last_break in userspace fault reports - Simplify one-level sysctl registration - Clean up branch prediction handling - Rework CPU counter facility to retrieve available counter sets just once - Other various small fixes and improvements all over the code * tag 's390-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (118 commits) s390/stackleak: provide fast __stackleak_poison() implementation stackleak: allow to specify arch specific stackleak poison function s390: select ARCH_USE_SYM_ANNOTATIONS s390/mm: use VM_FLUSH_RESET_PERMS in module_alloc() s390: wire up memfd_secret system call s390/mm: enable ARCH_HAS_SET_DIRECT_MAP s390/mm: use BIT macro to generate SET_MEMORY bit masks s390/relocate_kernel: adjust indentation s390/relocate_kernel: use SYM* macros instead of ENTRY(), etc. s390/entry: use SYM* macros instead of ENTRY(), etc. s390/purgatory: use SYM* macros instead of ENTRY(), etc. s390/kprobes: use SYM* macros instead of ENTRY(), etc. s390/reipl: use SYM* macros instead of ENTRY(), etc. s390/head64: use SYM* macros instead of ENTRY(), etc. s390/earlypgm: use SYM* macros instead of ENTRY(), etc. s390/mcount: use SYM* macros instead of ENTRY(), etc. s390/crc32le: use SYM* macros instead of ENTRY(), etc. s390/crc32be: use SYM* macros instead of ENTRY(), etc. s390/crypto,chacha: use SYM* macros instead of ENTRY(), etc. s390/amode31: use SYM* macros instead of ENTRY(), etc. ...
2023-04-29Merge tag 'trace-v6.4' of ↵Linus Torvalds2-2/+135
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - User events are finally ready! After lots of collaboration between various parties, we finally locked down on a stable interface for user events that can also work with user space only tracing. This is implemented by telling the kernel (or user space library, but that part is user space only and not part of this patch set), where the variable is that the application uses to know if something is listening to the trace. There's also an interface to tell the kernel about these events, which will show up in the /sys/kernel/tracing/events/user_events/ directory, where it can be enabled. When it's enabled, the kernel will update the variable, to tell the application to start writing to the kernel. See https://lwn.net/Articles/927595/ - Cleaned up the direct trampolines code to simplify arm64 addition of direct trampolines. Direct trampolines use the ftrace interface but instead of jumping to the ftrace trampoline, applications (mostly BPF) can register their own trampoline for performance reasons. - Some updates to the fprobe infrastructure. fprobes are more efficient than kprobes, as it does not need to save all the registers that kprobes on ftrace do. More work needs to be done before the fprobes will be exposed as dynamic events. - More updates to references to the obsolete path of /sys/kernel/debug/tracing for the new /sys/kernel/tracing path. - Add a seq_buf_do_printk() helper to seq_bufs, to print a large buffer line by line instead of all at once. There are users in production kernels that have a large data dump that originally used printk() directly, but the data dump was larger than what printk() allowed as a single print. Using seq_buf() to do the printing fixes that. - Add /sys/kernel/tracing/touched_functions that shows all functions that was every traced by ftrace or a direct trampoline. This is used for debugging issues where a traced function could have caused a crash by a bpf program or live patching. - Add a "fields" option that is similar to "raw" but outputs the fields of the events. It's easier to read by humans. - Some minor fixes and clean ups. * tag 'trace-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (41 commits) ring-buffer: Sync IRQ works before buffer destruction tracing: Add missing spaces in trace_print_hex_seq() ring-buffer: Ensure proper resetting of atomic variables in ring_buffer_reset_online_cpus recordmcount: Fix memory leaks in the uwrite function tracing/user_events: Limit max fault-in attempts tracing/user_events: Prevent same address and bit per process tracing/user_events: Ensure bit is cleared on unregister tracing/user_events: Ensure write index cannot be negative seq_buf: Add seq_buf_do_printk() helper tracing: Fix print_fields() for __dyn_loc/__rel_loc tracing/user_events: Set event filter_type from type ring-buffer: Clearly check null ptr returned by rb_set_head_page() tracing: Unbreak user events tracing/user_events: Use print_format_fields() for trace output tracing/user_events: Align structs with tabs for readability tracing/user_events: Limit global user_event count tracing/user_events: Charge event allocs to cgroups tracing/user_events: Update documentation for ABI tracing/user_events: Use write ABI in example tracing/user_events: Add ABI self-test ...
2023-04-29Merge tag 'smp-core-2023-04-27' of ↵Linus Torvalds1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP cross-CPU function-call updates from Ingo Molnar: - Remove diagnostics and adjust config for CSD lock diagnostics - Add a generic IPI-sending tracepoint, as currently there's no easy way to instrument IPI origins: it's arch dependent and for some major architectures it's not even consistently available. * tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: trace,smp: Trace all smp_function_call*() invocations trace: Add trace_ipi_send_cpu() sched, smp: Trace smp callback causing an IPI smp: reword smp call IPI comment treewide: Trace IPIs sent via smp_send_reschedule() irq_work: Trace self-IPIs sent via arch_irq_work_raise() smp: Trace IPIs sent via arch_send_call_function_ipi_mask() sched, smp: Trace IPIs sent via send_call_function_single_ipi() trace: Add trace_ipi_send_cpumask() kernel/smp: Make csdlock_debug= resettable locking/csd_lock: Remove per-CPU data indirection from CSD lock debugging locking/csd_lock: Remove added data from CSD lock debugging locking/csd_lock: Add Kconfig option for csd_debug default
2023-04-28Merge tag 'mm-nonmm-stable-2023-04-27-16-01' of ↵Linus Torvalds3-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: "Mainly singleton patches all over the place. Series of note are: - updates to scripts/gdb from Glenn Washburn - kexec cleanups from Bjorn Helgaas" * tag 'mm-nonmm-stable-2023-04-27-16-01' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (50 commits) mailmap: add entries for Paul Mackerras libgcc: add forward declarations for generic library routines mailmap: add entry for Oleksandr ocfs2: reduce ioctl stack usage fs/proc: add Kthread flag to /proc/$pid/status ia64: fix an addr to taddr in huge_pte_offset() checkpatch: introduce proper bindings license check epoll: rename global epmutex scripts/gdb: add GDB convenience functions $lx_dentry_name() and $lx_i_dentry() scripts/gdb: create linux/vfs.py for VFS related GDB helpers uapi/linux/const.h: prefer ISO-friendly __typeof__ delayacct: track delays from IRQ/SOFTIRQ scripts/gdb: timerlist: convert int chunks to str scripts/gdb: print interrupts scripts/gdb: raise error with reduced debugging information scripts/gdb: add a Radix Tree Parser lib/rbtree: use '+' instead of '|' for setting color. proc/stat: remove arch_idle_time() checkpatch: check for misuse of the link tags checkpatch: allow Closes tags with links ...
2023-04-28Merge tag 'mm-stable-2023-04-27-15-30' of ↵Linus Torvalds8-64/+187
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of switching from a user process to a kernel thread. - More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav. - zsmalloc performance improvements from Sergey Senozhatsky. - Yue Zhao has found and fixed some data race issues around the alteration of memcg userspace tunables. - VFS rationalizations from Christoph Hellwig: - removal of most of the callers of write_one_page() - make __filemap_get_folio()'s return value more useful - Luis Chamberlain has changed tmpfs so it no longer requires swap backing. Use `mount -o noswap'. - Qi Zheng has made the slab shrinkers operate locklessly, providing some scalability benefits. - Keith Busch has improved dmapool's performance, making part of its operations O(1) rather than O(n). - Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd, permitting userspace to wr-protect anon memory unpopulated ptes. - Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather than exclusive, and has fixed a bunch of errors which were caused by its unintuitive meaning. - Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature, which causes minor faults to install a write-protected pte. - Vlastimil Babka has done some maintenance work on vma_merge(): cleanups to the kernel code and improvements to our userspace test harness. - Cleanups to do_fault_around() by Lorenzo Stoakes. - Mike Rapoport has moved a lot of initialization code out of various mm/ files and into mm/mm_init.c. - Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for DRM, but DRM doesn't use it any more. - Lorenzo has also coverted read_kcore() and vread() to use iterators and has thereby removed the use of bounce buffers in some cases. - Lorenzo has also contributed further cleanups of vma_merge(). - Chaitanya Prakash provides some fixes to the mmap selftesting code. - Matthew Wilcox changes xfs and afs so they no longer take sleeping locks in ->map_page(), a step towards RCUification of pagefaults. - Suren Baghdasaryan has improved mmap_lock scalability by switching to per-VMA locking. - Frederic Weisbecker has reworked the percpu cache draining so that it no longer causes latency glitches on cpu isolated workloads. - Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig logic. - Liu Shixin has changed zswap's initialization so we no longer waste a chunk of memory if zswap is not being used. - Yosry Ahmed has improved the performance of memcg statistics flushing. - David Stevens has fixed several issues involving khugepaged, userfaultfd and shmem. - Christoph Hellwig has provided some cleanup work to zram's IO-related code paths. - David Hildenbrand has fixed up some issues in the selftest code's testing of our pte state changing. - Pankaj Raghav has made page_endio() unneeded and has removed it. - Peter Xu contributed some rationalizations of the userfaultfd selftests. - Yosry Ahmed has fixed an issue around memcg's page recalim accounting. - Chaitanya Prakash has fixed some arm-related issues in the selftests/mm code. - Longlong Xia has improved the way in which KSM handles hwpoisoned pages. - Peter Xu fixes a few issues with uffd-wp at fork() time. - Stefan Roesch has changed KSM so that it may now be used on a per-process and per-cgroup basis. * tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits) mm,unmap: avoid flushing TLB in batch if PTE is inaccessible shmem: restrict noswap option to initial user namespace mm/khugepaged: fix conflicting mods to collapse_file() sparse: remove unnecessary 0 values from rc mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area() hugetlb: pte_alloc_huge() to replace huge pte_alloc_map() maple_tree: fix allocation in mas_sparse_area() mm: do not increment pgfault stats when page fault handler retries zsmalloc: allow only one active pool compaction context selftests/mm: add new selftests for KSM mm: add new KSM process and sysfs knobs mm: add new api to enable ksm per process mm: shrinkers: fix debugfs file permissions mm: don't check VMA write permissions if the PTE/PMD indicates write permissions migrate_pages_batch: fix statistics for longterm pin retry userfaultfd: use helper function range_in_vma() lib/show_mem.c: use for_each_populated_zone() simplify code mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list() fs/buffer: convert create_page_buffers to folio_create_buffers fs/buffer: add folio_create_empty_buffers helper ...
2023-04-28Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-0/+1
Pull virtio updates from Michael Tsirkin: "virtio,vhost,vdpa: features, fixes, and cleanups: - reduction in interrupt rate in virtio - perf improvement for VDUSE - scalability for vhost-scsi - non power of 2 ring support for packed rings - better management for mlx5 vdpa - suspend for snet - VIRTIO_F_NOTIFICATION_DATA - shared backend with vdpa-sim-blk - user VA support in vdpa-sim - better struct packing for virtio and fixes, cleanups all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (52 commits) vhost_vdpa: fix unmap process in no-batch mode MAINTAINERS: make me a reviewer of VIRTIO CORE AND NET DRIVERS tools/virtio: fix build caused by virtio_ring changes virtio_ring: add a struct device forward declaration vdpa_sim_blk: support shared backend vdpa_sim: move buffer allocation in the devices vdpa/snet: use likely/unlikely macros in hot functions vdpa/snet: implement kick_vq_with_data callback virtio-vdpa: add VIRTIO_F_NOTIFICATION_DATA feature support virtio: add VIRTIO_F_NOTIFICATION_DATA feature support vdpa/snet: support the suspend vDPA callback vdpa/snet: support getting and setting VQ state MAINTAINERS: add vringh.h to Virtio Core and Net Drivers vringh: address kdoc warnings vdpa: address kdoc warnings virtio_ring: don't update event idx on get_buf vdpa_sim: add support for user VA vdpa_sim: replace the spinlock with a mutex to protect the state vdpa_sim: use kthread worker vdpa_sim: make devices agnostic for work management ...
2023-04-28Merge tag 'modules-6.4-rc1' of ↵Linus Torvalds7-19/+44
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull module updates from Luis Chamberlain: "The summary of the changes for this pull requests is: - Song Liu's new struct module_memory replacement - Nick Alcock's MODULE_LICENSE() removal for non-modules - My cleanups and enhancements to reduce the areas where we vmalloc module memory for duplicates, and the respective debug code which proves the remaining vmalloc pressure comes from userspace. Most of the changes have been in linux-next for quite some time except the minor fixes I made to check if a module was already loaded prior to allocating the final module memory with vmalloc and the respective debug code it introduces to help clarify the issue. Although the functional change is small it is rather safe as it can only *help* reduce vmalloc space for duplicates and is confirmed to fix a bootup issue with over 400 CPUs with KASAN enabled. I don't expect stable kernels to pick up that fix as the cleanups would have also had to have been picked up. Folks on larger CPU systems with modules will want to just upgrade if vmalloc space has been an issue on bootup. Given the size of this request, here's some more elaborate details: The functional change change in this pull request is the very first patch from Song Liu which replaces the 'struct module_layout' with a new 'struct module_memory'. The old data structure tried to put together all types of supported module memory types in one data structure, the new one abstracts the differences in memory types in a module to allow each one to provide their own set of details. This paves the way in the future so we can deal with them in a cleaner way. If you look at changes they also provide a nice cleanup of how we handle these different memory areas in a module. This change has been in linux-next since before the merge window opened for v6.3 so to provide more than a full kernel cycle of testing. It's a good thing as quite a bit of fixes have been found for it. Jason Baron then made dynamic debug a first class citizen module user by using module notifier callbacks to allocate / remove module specific dynamic debug information. Nick Alcock has done quite a bit of work cross-tree to remove module license tags from things which cannot possibly be module at my request so to: a) help him with his longer term tooling goals which require a deterministic evaluation if a piece a symbol code could ever be part of a module or not. But quite recently it is has been made clear that tooling is not the only one that would benefit. Disambiguating symbols also helps efforts such as live patching, kprobes and BPF, but for other reasons and R&D on this area is active with no clear solution in sight. b) help us inch closer to the now generally accepted long term goal of automating all the MODULE_LICENSE() tags from SPDX license tags In so far as a) is concerned, although module license tags are a no-op for non-modules, tools which would want create a mapping of possible modules can only rely on the module license tag after the commit 8b41fc4454e ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"). Nick has been working on this *for years* and AFAICT I was the only one to suggest two alternatives to this approach for tooling. The complexity in one of my suggested approaches lies in that we'd need a possible-obj-m and a could-be-module which would check if the object being built is part of any kconfig build which could ever lead to it being part of a module, and if so define a new define -DPOSSIBLE_MODULE [0]. A more obvious yet theoretical approach I've suggested would be to have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as well but that means getting kconfig symbol names mapping to modules always, and I don't think that's the case today. I am not aware of Nick or anyone exploring either of these options. Quite recently Josh Poimboeuf has pointed out that live patching, kprobes and BPF would benefit from resolving some part of the disambiguation as well but for other reasons. The function granularity KASLR (fgkaslr) patches were mentioned but Joe Lawrence has clarified this effort has been dropped with no clear solution in sight [1]. In the meantime removing module license tags from code which could never be modules is welcomed for both objectives mentioned above. Some developers have also welcomed these changes as it has helped clarify when a module was never possible and they forgot to clean this up, and so you'll see quite a bit of Nick's patches in other pull requests for this merge window. I just picked up the stragglers after rc3. LWN has good coverage on the motivation behind this work [2] and the typical cross-tree issues he ran into along the way. The only concrete blocker issue he ran into was that we should not remove the MODULE_LICENSE() tags from files which have no SPDX tags yet, even if they can never be modules. Nick ended up giving up on his efforts due to having to do this vetting and backlash he ran into from folks who really did *not understand* the core of the issue nor were providing any alternative / guidance. I've gone through his changes and dropped the patches which dropped the module license tags where an SPDX license tag was missing, it only consisted of 11 drivers. To see if a pull request deals with a file which lacks SPDX tags you can just use: ./scripts/spdxcheck.py -f \ $(git diff --name-only commid-id | xargs echo) You'll see a core module file in this pull request for the above, but that's not related to his changes. WE just need to add the SPDX license tag for the kernel/module/kmod.c file in the future but it demonstrates the effectiveness of the script. Most of Nick's changes were spread out through different trees, and I just picked up the slack after rc3 for the last kernel was out. Those changes have been in linux-next for over two weeks. The cleanups, debug code I added and final fix I added for modules were motivated by David Hildenbrand's report of boot failing on a systems with over 400 CPUs when KASAN was enabled due to running out of virtual memory space. Although the functional change only consists of 3 lines in the patch "module: avoid allocation if module is already present and ready", proving that this was the best we can do on the modules side took quite a bit of effort and new debug code. The initial cleanups I did on the modules side of things has been in linux-next since around rc3 of the last kernel, the actual final fix for and debug code however have only been in linux-next for about a week or so but I think it is worth getting that code in for this merge window as it does help fix / prove / evaluate the issues reported with larger number of CPUs. Userspace is not yet fixed as it is taking a bit of time for folks to understand the crux of the issue and find a proper resolution. Worst come to worst, I have a kludge-of-concept [3] of how to make kernel_read*() calls for modules unique / converge them, but I'm currently inclined to just see if userspace can fix this instead" Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0] Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1] Link: https://lwn.net/Articles/927569/ [2] Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3] * tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits) module: add debugging auto-load duplicate module support module: stats: fix invalid_mod_bytes typo module: remove use of uninitialized variable len module: fix building stats for 32-bit targets module: stats: include uapi/linux/module.h module: avoid allocation if module is already present and ready module: add debug stats to help identify memory pressure module: extract patient module check into helper modules/kmod: replace implementation with a semaphore Change DEFINE_SEMAPHORE() to take a number argument module: fix kmemleak annotations for non init ELF sections module: Ignore L0 and rename is_arm_mapping_symbol() module: Move is_arm_mapping_symbol() to module_symbol.h module: Sync code of is_arm_mapping_symbol() scripts/gdb: use mem instead of core_layout to get the module address interconnect: remove module-related code interconnect: remove MODULE_LICENSE in non-modules zswap: remove MODULE_LICENSE in non-modules zpool: remove MODULE_LICENSE in non-modules x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules ...
2023-04-27Merge tag 'driver-core-6.4-rc1' of ↵Linus Torvalds1-16/+18
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ...
2023-04-27Merge tag 'net-next-6.4' of ↵Linus Torvalds4-13/+328
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the default value allows for better BIG TCP performances - Reduce compound page head access for zero-copy data transfers - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible - Threaded NAPI improvements, adding defer skb free support and unneeded softirq avoidance - Address dst_entry reference count scalability issues, via false sharing avoidance and optimize refcount tracking - Add lockless accesses annotation to sk_err[_soft] - Optimize again the skb struct layout - Extends the skb drop reasons to make it usable by multiple subsystems - Better const qualifier awareness for socket casts BPF: - Add skb and XDP typed dynptrs which allow BPF programs for more ergonomic and less brittle iteration through data and variable-sized accesses - Add a new BPF netfilter program type and minimal support to hook BPF programs to netfilter hooks such as prerouting or forward - Add more precise memory usage reporting for all BPF map types - Adds support for using {FOU,GUE} encap with an ipip device operating in collect_md mode and add a set of BPF kfuncs for controlling encap params - Allow BPF programs to detect at load time whether a particular kfunc exists or not, and also add support for this in light skeleton - Bigger batch of BPF verifier improvements to prepare for upcoming BPF open-coded iterators allowing for less restrictive looping capabilities - Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF programs to NULL-check before passing such pointers into kfunc - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in local storage maps - Enable RCU semantics for task BPF kptrs and allow referenced kptr tasks to be stored in BPF maps - Add support for refcounted local kptrs to the verifier for allowing shared ownership, useful for adding a node to both the BPF list and rbtree - Add BPF verifier support for ST instructions in convert_ctx_access() which will help new -mcpu=v4 clang flag to start emitting them - Add ARM32 USDT support to libbpf - Improve bpftool's visual program dump which produces the control flow graph in a DOT format by adding C source inline annotations Protocols: - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value indicates the provenance of the IP address - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition - Add the handshake upcall mechanism, allowing the user-space to implement generic TLS handshake on kernel's behalf - Bridge: support per-{Port, VLAN} neighbor suppression, increasing resilience to nodes failures - SCTP: add support for Fair Capacity and Weighted Fair Queueing schedulers - MPTCP: delay first subflow allocation up to its first usage. This will allow for later better LSM interaction - xfrm: Remove inner/outer modes from input/output path. These are not needed anymore - WiFi: - reduced neighbor report (RNR) handling for AP mode - HW timestamping support - support for randomized auth/deauth TA for PASN privacy - per-link debugfs for multi-link - TC offload support for mac80211 drivers - mac80211 mesh fast-xmit and fast-rx support - enable Wi-Fi 7 (EHT) mesh support Netfilter: - Add nf_tables 'brouting' support, to force a packet to be routed instead of being bridged - Update bridge netfilter and ovs conntrack helpers to handle IPv6 Jumbo packets properly, i.e. fetch the packet length from hop-by-hop extension header. This is needed for BIT TCP support - The iptables 32bit compat interface isn't compiled in by default anymore - Move ip(6)tables builtin icmp matches to the udptcp one. This has the advantage that icmp/icmpv6 match doesn't load the iptables/ip6tables modules anymore when iptables-nft is used - Extended netlink error report for netdevice in flowtables and netdev/chains. Allow for incrementally add/delete devices to netdev basechain. Allow to create netdev chain without device Driver API: - Remove redundant Device Control Error Reporting Enable, as PCI core has already error reporting enabled at enumeration time - Move Multicast DB netlink handlers to core, allowing devices other then bridge to use them - Allow the page_pool to directly recycle the pages from safely localized NAPI - Implement lockless TX queue stop/wake combo macros, allowing for further code de-duplication and sanitization - Add YNL support for user headers and struct attrs - Add partial YNL specification for devlink - Add partial YNL specification for ethtool - Add tc-mqprio and tc-taprio support for preemptible traffic classes - Add tx push buf len param to ethtool, specifies the maximum number of bytes of a transmitted packet a driver can push directly to the underlying device - Add basic LED support for switch/phy - Add NAPI documentation, stop relaying on external links - Convert dsa_master_ioctl() to netdev notifier. This is a preparatory work to make the hardware timestamping layer selectable by user space - Add transceiver support and improve the error messages for CAN-FD controllers New hardware / drivers: - Ethernet: - AMD/Pensando core device support - MediaTek MT7981 SoC - MediaTek MT7988 SoC - Broadcom BCM53134 embedded switch - Texas Instruments CPSW9G ethernet switch - Qualcomm EMAC3 DWMAC ethernet - StarFive JH7110 SoC - NXP CBTX ethernet PHY - WiFi: - Apple M1 Pro/Max devices - RealTek rtl8710bu/rtl8188gu - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset - Bluetooth: - Realtek RTL8821CS, RTL8851B, RTL8852BS - Mediatek MT7663, MT7922 - NXP w8997 - Actions Semi ATS2851 - QTI WCN6855 - Marvell 88W8997 - Can: - STMicroelectronics bxcan stm32f429 Drivers: - Ethernet NICs: - Intel (1G, icg): - add tracking and reporting of QBV config errors - add support for configuring max SDU for each Tx queue - Intel (100G, ice): - refactor mailbox overflow detection to support Scalable IOV - GNSS interface optimization - Intel (i40e): - support XDP multi-buffer - nVidia/Mellanox: - add the support for linux bridge multicast offload - enable TC offload for egress and engress MACVLAN over bond - add support for VxLAN GBP encap/decap flows offload - extend packet offload to fully support libreswan - support tunnel mode in mlx5 IPsec packet offload - extend XDP multi-buffer support - support MACsec VLAN offload - add support for dynamic msix vectors allocation - drop RX page_cache and fully use page_pool - implement thermal zone to report NIC temperature - Netronome/Corigine: - add support for multi-zone conntrack offload - Solarflare/Xilinx: - support offloading TC VLAN push/pop actions to the MAE - support TC decap rules - support unicast PTP - Other NICs: - Broadcom (bnxt): enforce software based freq adjustments only on shared PHC NIC - RealTek (r8169): refactor to addess ASPM issues during NAPI poll - Micrel (lan8841): add support for PTP_PF_PEROUT - Cadence (macb): enable PTP unicast - Engleder (tsnep): add XDP socket zero-copy support - virtio-net: implement exact header length guest feature - veth: add page_pool support for page recycling - vxlan: add MDB data path support - gve: add XDP support for GQI-QPL format - geneve: accept every ethertype - macvlan: allow some packets to bypass broadcast queue - mana: add support for jumbo frame - Ethernet high-speed switches: - Microchip (sparx5): Add support for TC flower templates - Ethernet embedded switches: - Broadcom (b54): - configure 6318 and 63268 RGMII ports - Marvell (mv88e6xxx): - faster C45 bus scan - Microchip: - lan966x: - add support for IS1 VCAP - better TX/RX from/to CPU performances - ksz9477: add ETS Qdisc support - ksz8: enhance static MAC table operations and error handling - sama7g5: add PTP capability - NXP (ocelot): - add support for external ports - add support for preemptible traffic classes - Texas Instruments: - add CPSWxG SGMII support for J7200 and J721E - Intel WiFi (iwlwifi): - preparation for Wi-Fi 7 EHT and multi-link support - EHT (Wi-Fi 7) sniffer support - hardware timestamping support for some devices/firwmares - TX beacon protection on newer hardware - Qualcomm 802.11ax WiFi (ath11k): - MU-MIMO parameters support - ack signal support for management packets - RealTek WiFi (rtw88): - SDIO bus support - better support for some SDIO devices (e.g. MAC address from efuse) - RealTek WiFi (rtw89): - HW scan support for 8852b - better support for 6 GHz scanning - support for various newer firmware APIs - framework firmware backwards compatibility - MediaTek WiFi (mt76): - P2P support - mesh A-MSDU support - EHT (Wi-Fi 7) support - coredump support" * tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits) net: phy: hide the PHYLIB_LEDS knob net: phy: marvell-88x2222: remove unnecessary (void*) conversions tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp. net: amd: Fix link leak when verifying config failed net: phy: marvell: Fix inconsistent indenting in led_blink_set lan966x: Don't use xdp_frame when action is XDP_TX tsnep: Add XDP socket zero-copy TX support tsnep: Add XDP socket zero-copy RX support tsnep: Move skb receive action to separate function tsnep: Add functions for queue enable/disable tsnep: Rework TX/RX queue initialization tsnep: Replace modulo operation with mask net: phy: dp83867: Add led_brightness_set support net: phy: Fix reading LED reg property drivers: nfc: nfcsim: remove return value check of `dev_dir` net: phy: dp83867: Remove unnecessary (void*) conversions net: ethtool: coalesce: try to make user settings stick twice net: mana: Check if netdev/napi_alloc_frag returns single page net: mana: Rename mana_refill_rxoob and remove some empty lines net: veth: add page_pool stats ...
2023-04-26Merge tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linuxLinus Torvalds2-1/+204
Pull block updates from Jens Axboe: - drbd patches, bringing us closer to unifying the out-of-tree version and the in tree one (Andreas, Christoph) - support for auto-quiesce for the s390 dasd driver (Stefan) - MD pull request via Song: - md/bitmap: Optimal last page size (Jon Derrick) - Various raid10 fixes (Yu Kuai, Li Nan) - md: add error_handlers for raid0 and linear (Mariusz Tkaczyk) - NVMe pull request via Christoph: - Drop redundant pci_enable_pcie_error_reporting (Bjorn Helgaas) - Validate nvmet module parameters (Chaitanya Kulkarni) - Fence TCP socket on receive error (Chris Leech) - Fix async event trace event (Keith Busch) - Minor cleanups (Chaitanya Kulkarni, zhenwei pi) - Fix and cleanup nvmet Identify handling (Damien Le Moal, Christoph Hellwig) - Fix double blk_mq_complete_request race in the timeout handler (Lei Yin) - Fix irq locking in nvme-fcloop (Ming Lei) - Remove queue mapping helper for rdma devices (Sagi Grimberg) - use structured request attribute checks for nbd (Jakub) - fix blk-crypto race conditions between keyslot management (Eric) - add sed-opal support for reading read locking range attributes (Ondrej) - make fault injection configurable for null_blk (Akinobu) - clean up the request insertion API (Christoph) - clean up the queue running API (Christoph) - blkg config helper cleanups (Tejun) - lazy init support for blk-iolatency (Tejun) - various fixes and tweaks to ublk (Ming) - remove hybrid polling. It hasn't really been useful since we got async polled IO support, and these days we don't support sync polled IO at all (Keith) - misc fixes, cleanups, improvements (Zhong, Ondrej, Colin, Chengming, Chaitanya, me) * tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux: (118 commits) nbd: fix incomplete validation of ioctl arg ublk: don't return 0 in case of any failure sed-opal: geometry feature reporting command null_blk: Always check queue mode setting from configfs block: ublk: switch to ioctl command encoding blk-mq: fix the blk_mq_add_to_requeue_list call in blk_kick_flush block, bfq: Fix division by zero error on zero wsum fault-inject: fix build error when FAULT_INJECTION_CONFIGFS=y and CONFIGFS_FS=m block: store bdev->bd_disk->fops->submit_bio state in bdev block: re-arrange the struct block_device fields for better layout md/raid5: remove unused working_disks variable md/raid10: don't call bio_start_io_acct twice for bio which experienced read error md/raid10: fix memleak of md thread md/raid10: fix memleak for 'conf->bio_split' md/raid10: fix leak of 'r10bio->remaining' for recovery md/raid10: don't BUG_ON() in raise_barrier() md: fix soft lockup in status_resync md: add error_handlers for raid0 and linear md: Use optimal I/O size for last bitmap page md: Fix types in sb writer ...
2023-04-26Merge tag 'for-6.4-tag' of ↵Linus Torvalds1-6/+0
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs updates from David Sterba: "Mostly core changes and cleanups, some notable fixes and two performance improvements in directory logging. The IO path cleanups are removing or refactoring old code, scrub main loop has been completely rewritten also refactoring old code. There are some changes to non-btrfs code, mostly trivial, the cgroup punt bio logic is only moved from generic code. Performance improvements: - improve logging changes in a directory during one transaction, avoid iterating over items and reduce lock contention (fsync time 4x lower) - when logging directory entries during one transaction, reduce locking of subvolume trees by checking tree-log instead (improvement in throughput and latency for concurrent access to a subvolume) Notable fixes: - dev-replace: - properly honor read mode when requested to avoid reading from source device - target device won't be used for eventual read repair, this is unreliable for NODATASUM files - when there are unpaired (and unrepairable) metadata during replace, exit early with error and don't try to finish whole operation - scrub ioctl properly rejects unknown flags - fix global block reserve calculations - fix partial direct io write when there's a page fault in the middle, iomap will try to continue with partial request but the btrfs part did not match that, this can lead to zeros written instead of data Core changes: - io path: - continued cleanups and refactoring around bio handling - extent io submit path simplifications and cleanups - flush write path simplifications and cleanups - rework logic of passing sync mode of bio, with further cleanups - rewrite scrub code flow, restructure how the stripes are enumerated and verified in a more unified way - allow to set lower threshold for block group reclaim in debug mode to aid zoned mode testing - remove obsolete time-based delayed ref throttling logic when truncating items - DREW locks are not using percpu variables anymore - more warning fixes (-Wmaybe-uninitialized) - u64 division simplifications - error handling improvements Non-btrfs code changes: - push cgroup punt bio logic to btrfs code (there was no other user of that), the functionality can be now selected separately by BLK_CGROUP_PUNT_BIO - crc32c_impl removed after removing last uses in btrfs code - add btrfs_assertfail() to objtool table" * tag 'for-6.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (147 commits) btrfs: mark btrfs_assertfail() __noreturn btrfs: fix uninitialized variable warnings btrfs: use log root when iterating over index keys when logging directory btrfs: avoid iterating over all indexes when logging directory btrfs: dev-replace: error out if we have unrepaired metadata error during btrfs: remove pointless loop at btrfs_get_next_valid_item() btrfs: scrub: reject unsupported scrub flags btrfs: reinterpret async discard iops_limit=0 as no delay btrfs: set default discard iops_limit to 1000 btrfs: remove unused raid56 functions which were dedicated for scrub btrfs: scrub: remove scrub_bio structure btrfs: scrub: remove scrub_block and scrub_sector structures btrfs: scrub: remove the old scrub recheck code btrfs: scrub: remove the old writeback infrastructure btrfs: scrub: remove scrub_parity structure btrfs: scrub: use scrub_stripe to implement RAID56 P/Q scrub btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure btrfs: scrub: introduce helper to queue a stripe for scrub btrfs: scrub: introduce error reporting functionality for scrub_stripe btrfs: scrub: introduce a writeback helper for scrub_stripe ...
2023-04-26Merge tag 'v6.4-p1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Total usage stats now include all that returned errors (instead of just some) - Remove maximum hash statesize limit - Add cloning support for hmac and unkeyed hashes - Demote BUG_ON in crypto_unregister_alg to a WARN_ON Algorithms: - Use RIP-relative addressing on x86 to prepare for PIE build - Add accelerated AES/GCM stitched implementation on powerpc P10 - Add some test vectors for cmac(camellia) - Remove failure case where jent is unavailable outside of FIPS mode in drbg - Add permanent and intermittent health error checks in jitter RNG Drivers: - Add support for 402xx devices in qat - Add support for HiSTB TRNG - Fix hash concurrency issues in stm32 - Add OP-TEE firmware support in caam" * tag 'v6.4-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (139 commits) i2c: designware: Add doorbell support for Mendocino i2c: designware: Use PCI PSP driver for communication powerpc: Move Power10 feature PPC_MODULE_FEATURE_P10 crypto: p10-aes-gcm - Remove POWER10_CPU dependency crypto: testmgr - Add some test vectors for cmac(camellia) crypto: cryptd - Add support for cloning hashes crypto: cryptd - Convert hash to use modern init_tfm/exit_tfm crypto: hmac - Add support for cloning crypto: hash - Add crypto_clone_ahash/shash crypto: api - Add crypto_clone_tfm crypto: api - Add crypto_tfm_get crypto: x86/sha - Use local .L symbols for code crypto: x86/crc32 - Use local .L symbols for code crypto: x86/aesni - Use local .L symbols for code crypto: x86/sha256 - Use RIP-relative addressing crypto: x86/ghash - Use RIP-relative addressing crypto: x86/des3 - Use RIP-relative addressing crypto: x86/crc32c - Use RIP-relative addressing crypto: x86/cast6 - Use RIP-relative addressing crypto: x86/cast5 - Use RIP-relative addressing ...
2023-04-26seq_buf: Add seq_buf_do_printk() helperSergey Senozhatsky1-0/+32
Sometimes we use seq_buf to format a string buffer, which we then pass to printk(). However, in certain situations the seq_buf string buffer can get too big, exceeding the PRINTKRB_RECORD_MAX bytes limit, and causing printk() to truncate the string. Add a new seq_buf helper. This helper prints the seq_buf string buffer line by line, using \n as a delimiter, rather than passing the whole string buffer to printk() at once. Link: https://lkml.kernel.org/r/20230415100110.1419872-1-senozhatsky@chromium.org Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Tested-by: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-04-25Merge tag 'printk-for-6.4' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Code cleanup and dead code removal * tag 'printk-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: Remove obsoleted check for non-existent "user" object lib/vsprintf: Use isodigit() for the octal number check Remove orphaned CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT
2023-04-25Merge tag 'asm-generic-6.4' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "These are various cleanups, fixing a number of uapi header files to no longer reference CONFIG_* symbols, and one patch that introduces the new CONFIG_HAS_IOPORT symbol for architectures that provide working inb()/outb() macros, as a preparation for adding driver dependencies on those in the following release" * tag 'asm-generic-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: Kconfig: introduce HAS_IOPORT option and select it as necessary scripts: Update the CONFIG_* ignore list in headers_install.sh pktcdvd: Remove CONFIG_CDROM_PKTCDVD_WCACHE from uapi header Move bp_type_idx to include/linux/hw_breakpoint.h Move ep_take_care_of_epollwakeup() to fs/eventpoll.c Move COMPAT_ATM_ADDPARTY to net/atm/svc.c
2023-04-25Merge tag 'timers-core-2023-04-24' of ↵Linus Torvalds1-9/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timers and timekeeping updates from Thomas Gleixner: - Improve the VDSO build time checks to cover all dynamic relocations VDSO does not allow dynamic relocations, but the build time check is incomplete and fragile. It's based on architectures specifying the relocation types to search for and does not handle R_*_NONE relocation entries correctly. R_*_NONE relocations are injected by some GNU ld variants if they fail to determine the exact .rel[a]/dyn_size to cover trailing zeros. R_*_NONE relocations must be ignored by dynamic loaders, so they should be ignored in the build time check too. Remove the architecture specific relocation types to check for and validate strictly that no other relocations than R_*_NONE end up in the VSDO .so file. - Prefer signal delivery to the current thread for CLOCK_PROCESS_CPUTIME_ID based posix-timers Such timers prefer to deliver the signal to the main thread of a process even if the context in which the timer expires is the current task. This has the downside that it might wake up an idle thread. As there is no requirement or guarantee that the signal has to be delivered to the main thread, avoid this by preferring the current task if it is part of the thread group which shares sighand. This not only avoids waking idle threads, it also distributes the signal delivery in case of multiple timers firing in the context of different threads close to each other better. - Align the tick period properly (again) For a long time the tick was starting at CLOCK_MONOTONIC zero, which allowed users space applications to either align with the tick or to place a periodic computation so that it does not interfere with the tick. The alignement of the tick period was more by chance than by intention as the tick is set up before a high resolution clocksource is installed, i.e. timekeeping is still tick based and the tick period advances from there. The early enablement of sched_clock() broke this alignement as the time accumulated by sched_clock() is taken into account when timekeeping is initialized. So the base value now(CLOCK_MONOTONIC) is not longer a multiple of tick periods, which breaks applications which relied on that behaviour. Cure this by aligning the tick starting point to the next multiple of tick periods, i.e 1000ms/CONFIG_HZ. - A set of NOHZ fixes and enhancements: * Cure the concurrent writer race for idle and IO sleeptime statistics The statitic values which are exposed via /proc/stat are updated from the CPU local idle exit and remotely by cpufreq, but that happens without any form of serialization. As a consequence sleeptimes can be accounted twice or worse. Prevent this by restricting the accumulation writeback to the CPU local idle exit and let the remote access compute the accumulated value. * Protect idle/iowait sleep time with a sequence count Reading idle/iowait sleep time, e.g. from /proc/stat, can race with idle exit updates. As a consequence the readout may result in random and potentially going backwards values. Protect this by a sequence count, which fixes the idle time statistics issue, but cannot fix the iowait time problem because iowait time accounting races with remote wake ups decrementing the remote runqueues nr_iowait counter. The latter is impossible to fix, so the only way to deal with that is to document it properly and to remove the assertion in the selftest which triggers occasionally due to that. * Restructure struct tick_sched for better cache layout * Some small cleanups and a better cache layout for struct tick_sched - Implement the missing timer_wait_running() callback for POSIX CPU timers For unknown reason the introduction of the timer_wait_running() callback missed to fixup posix CPU timers, which went unnoticed for almost four years. While initially only targeted to prevent livelocks between a timer deletion and the timer expiry function on PREEMPT_RT enabled kernels, it turned out that fixing this for mainline is not as trivial as just implementing a stub similar to the hrtimer/timer callbacks. The reason is that for CONFIG_POSIX_CPU_TIMERS_TASK_WORK enabled systems there is a livelock issue independent of RT. CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y moves the expiry of POSIX CPU timers out from hard interrupt context to task work, which is handled before returning to user space or to a VM. The expiry mechanism moves the expired timers to a stack local list head with sighand lock held. Once sighand is dropped the task can be preempted and a task which wants to delete a timer will spin-wait until the expiry task is scheduled back in. In the worst case this will end up in a livelock when the preempting task and the expiry task are pinned on the same CPU. The timer wheel has a timer_wait_running() mechanism for RT, which uses a per CPU timer-base expiry lock which is held by the expiry code and the task waiting for the timer function to complete blocks on that lock. This does not work in the same way for posix CPU timers as there is no timer base and expiry for process wide timers can run on any task belonging to that process, but the concept of waiting on an expiry lock can be used too in a slightly different way. Add a per task mutex to struct posix_cputimers_work, let the expiry task hold it accross the expiry function and let the deleting task which waits for the expiry to complete block on the mutex. In the non-contended case this results in an extra mutex_lock()/unlock() pair on both sides. This avoids spin-waiting on a task which is scheduled out, prevents the livelock and cures the problem for RT and !RT systems * tag 'timers-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-cpu-timers: Implement the missing timer_wait_running callback selftests/proc: Assert clock_gettime(CLOCK_BOOTTIME) VS /proc/uptime monotonicity selftests/proc: Remove idle time monotonicity assertions MAINTAINERS: Remove stale email address timers/nohz: Remove middle-function __tick_nohz_idle_stop_tick() timers/nohz: Add a comment about broken iowait counter update race timers/nohz: Protect idle/iowait sleep time under seqcount timers/nohz: Only ever update sleeptime from idle exit timers/nohz: Restructure and reshuffle struct tick_sched tick/common: Align tick period with the HZ tick. selftests/timers/posix_timers: Test delivery of signals across threads posix-timers: Prefer delivery of signals to the current thread vdso: Improve cmd_vdso_check to check all dynamic relocations
2023-04-25Merge tag 'core-debugobjects-2023-04-24' of ↵Linus Torvalds1-59/+66
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core debugobjects update from Thomas Gleixner: "A single update to debugobjects: Prevent a race vs statically initialized objects. Such objects are usually not initialized via an init() function. They are special cased and detected on first use under the assumption that they are already correctly initialized via the static initializer. This works correctly unless there are two concurrent debug object operations on such an object. The first one detects that the object is not yet tracked and tries to establish a tracking object after dropping the debug objects hash bucket lock. The concurrent operation does the same. The one which wins the race ends up modifying the state of the object which makes the other one fail resulting in a bogus debug objects warning. Prevent this by making the detection of a static object and the allocation of a tracking object atomic under the hash bucket lock. So the first one to acquire the hash bucket lock will succeed and the second one will observe the correct tracking state. This race existed forever but was only exposed when the timer wheel code added a debug_object_assert_init() call outside of the timer base locked region. This replaced the previous warning about timer::function being NULL which had to be removed when the timer_shutdown() mechanics were added" * tag 'core-debugobjects-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: debugobject: Prevent init race with static objects
2023-04-24Merge tag 'linux-kselftest-kunit-6.4-rc1' of ↵Linus Torvalds4-29/+419
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit updates from Shuah Khan: - several fixes to kunit tool - new klist structure test - support for m68k under QEMU - support for overriding the QEMU serial port - support for SH under QEMU * tag 'linux-kselftest-kunit-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: add tests for using current KUnit test field kunit: tool: Add support for SH under QEMU kunit: tool: Add support for overriding the QEMU serial port .gitignore: Unignore .kunitconfig list: test: Test the klist structure kunit: increase KUNIT_LOG_SIZE to 2048 bytes kunit: Use gfp in kunit_alloc_resource() kernel-doc kunit: tool: fix pre-existing `mypy --strict` errors and update run_checks.py kunit: tool: remove unused imports and variables kunit: tool: add subscripts for type annotations where appropriate kunit: fix bug of extra newline characters in debugfs logs kunit: fix bug in the order of lines in debugfs logs kunit: fix bug in debugfs logs of parameterized tests kunit: tool: Add support for m68k under QEMU
2023-04-24Merge tag 'rcu.6.4.april5.2023.3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux Pull RCU updates from Joel Fernandes: - Updates and additions to MAINTAINERS files, with Boqun being added to the RCU entry and Zqiang being added as an RCU reviewer. I have also transitioned from reviewer to maintainer; however, Paul will be taking over sending RCU pull-requests for the next merge window. - Resolution of hotplug warning in nohz code, achieved by fixing cpu_is_hotpluggable() through interaction with the nohz subsystem. Tick dependency modifications by Zqiang, focusing on fixing usage of the TICK_DEP_BIT_RCU_EXP bitmask. - Avoid needless calls to the rcu-lazy shrinker for CONFIG_RCU_LAZY=n kernels, fixed by Zqiang. - Improvements to rcu-tasks stall reporting by Neeraj. - Initial renaming of k[v]free_rcu() to k[v]free_rcu_mightsleep() for increased robustness, affecting several components like mac802154, drbd, vmw_vmci, tracing, and more. A report by Eric Dumazet showed that the API could be unknowingly used in an atomic context, so we'd rather make sure they know what they're asking for by being explicit: https://lore.kernel.org/all/20221202052847.2623997-1-edumazet@google.com/ - Documentation updates, including corrections to spelling, clarifications in comments, and improvements to the srcu_size_state comments. - Better srcu_struct cache locality for readers, by adjusting the size of srcu_struct in support of SRCU usage by Christoph Hellwig. - Teach lockdep to detect deadlocks between srcu_read_lock() vs synchronize_srcu() contributed by Boqun. Previously lockdep could not detect such deadlocks, now it can. - Integration of rcutorture and rcu-related tools, targeted for v6.4 from Boqun's tree, featuring new SRCU deadlock scenarios, test_nmis module parameter, and more - Miscellaneous changes, various code cleanups and comment improvements * tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux: (71 commits) checkpatch: Error out if deprecated RCU API used mac802154: Rename kfree_rcu() to kvfree_rcu_mightsleep() rcuscale: Rename kfree_rcu() to kfree_rcu_mightsleep() ext4/super: Rename kfree_rcu() to kfree_rcu_mightsleep() net/mlx5: Rename kfree_rcu() to kfree_rcu_mightsleep() net/sysctl: Rename kvfree_rcu() to kvfree_rcu_mightsleep() lib/test_vmalloc.c: Rename kvfree_rcu() to kvfree_rcu_mightsleep() tracing: Rename kvfree_rcu() to kvfree_rcu_mightsleep() misc: vmw_vmci: Rename kvfree_rcu() to kvfree_rcu_mightsleep() drbd: Rename kvfree_rcu() to kvfree_rcu_mightsleep() rcu: Protect rcu_print_task_exp_stall() ->exp_tasks access rcu: Avoid stack overflow due to __rcu_irq_enter_check_tick() being kprobe-ed rcu-tasks: Report stalls during synchronize_srcu() in rcu_tasks_postscan() rcu: Permit start_poll_synchronize_rcu_expedited() to be invoked early rcu: Remove never-set needwake assignment from rcu_report_qs_rdp() rcu: Register rcu-lazy shrinker only for CONFIG_RCU_LAZY=y kernels rcu: Fix missing TICK_DEP_MASK_RCU_EXP dependency check rcu: Fix set/clear TICK_DEP_BIT_RCU_EXP bitmask race rcu/trace: use strscpy() to instead of strncpy() tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem ...
2023-04-24iov: improve copy_iovec_from_user() code generationLinus Torvalds1-9/+26
Use the same pattern as the compat version of this code does: instead of copying the whole array to a kernel buffer and then having a separate phase of verifying it, just do it one entry at a time, verifying as you go. On Jens' /dev/zero readv() test this improves performance by ~6%. [ This was obviously triggered by Jens' ITER_UBUF updates series ] Reported-and-tested-by: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/all/de35d11d-bce7-e976-7372-1f2caf417103@kernel.dk/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-04-24Merge tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linuxLinus Torvalds1-30/+59
Pull ITER_UBUF updates from Jens Axboe: "This turns singe vector imports into ITER_UBUF, rather than ITER_IOVEC. The former is more trivial to iterate and advance, and hence a bit more efficient. From some very unscientific testing, ~60% of all iovec imports are single vector" * tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linux: iov_iter: Mark copy_compat_iovec_from_user() noinline iov_iter: import single vector iovecs as ITER_UBUF iov_iter: convert import_single_range() to ITER_UBUF iov_iter: overlay struct iovec and ubuf/len iov_iter: set nr_segs = 1 for ITER_UBUF iov_iter: remove iov_iter_iovec() iov_iter: add iter_iov_addr() and iter_iov_len() helpers ALSA: pcm: check for user backed iterator, not specific iterator type IB/qib: check for user backed iterator, not specific iterator type IB/hfi1: check for user backed iterator, not specific iterator type iov_iter: add iter_iovec() helper block: ensure bio_alloc_map_data() deals with ITER_UBUF correctly
2023-04-22maple_tree: fix allocation in mas_sparse_area()Peng Zhang1-21/+20
In the case of reverse allocation, mas->index and mas->last do not point to the correct allocation range, which will cause users to get incorrect allocation results, so fix it. If the user does not use it in a specific way, this bug will not be triggered. This is a bug, but only VMA uses it now, the way VMA is used now will not trigger it. There is a possibility that a user will trigger it in the future. Also re-check whether the size is still satisfied after the lower bound was increased, which is a corner case and is incorrect in previous versions. Link: https://lkml.kernel.org/r/20230419093625.99201-1-zhangpeng.00@bytedance.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com> Cc: Liam R. Howlett <Liam.Howlett@Oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-22lib/show_mem.c: use for_each_populated_zone() simplify codeYajun Deng1-13/+6
__show_mem() needs to iterate over all zones that have memory, we can simplify the code by using for_each_populated_zone(). Link: https://lkml.kernel.org/r/20230417035226.4013584-1-yajun.deng@linux.dev Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-21lib/group_cpus: Export group_cpus_evenly()Xie Yongji1-0/+1
Export group_cpus_evenly() so that some modules can make use of it to group CPUs evenly according to NUMA and CPU locality. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230323053043.35-2-xieyongji@bytedance.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-35/+31
Adjacent changes: net/mptcp/protocol.h 63740448a32e ("mptcp: fix accept vs worker race") 2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close") ddb1a072f858 ("mptcp: move first subflow allocation at mpc access time") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19lib/rbtree: use '+' instead of '|' for setting color.Noah Goldstein1-1/+1
This has a slight benefit for x86 and has no effect on other targets. The benefit to x86 is it change the codegen for setting a node to block from `mov %r0, %r1; or $RB_BLACK, %r1` to `lea RB_BLACK(%r0), %r1` which saves an instructions. In all other cases it just replace ALU with ALU (or -> and) which perform the same on all machines I am aware of. Total instructions in rbtree.o: Before - 802 After - 782 so it saves about 20 `mov` instructions. Link: https://lkml.kernel.org/r/20230404221350.3806566-1-goldstein.w.n@gmail.com Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com> Cc: Michel Lespinasse <michel@lespinasse.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-19maple_tree: use correct variable type in sizeofPeng Zhang1-1/+1
The type of variable pointed to by pivs is unsigned long, but the type used in sizeof is a pointer type. Change it to unsigned long. This change has no runtime effect, as sizeof(ul) == sizeof(ul *). Link: https://lkml.kernel.org/r/20230411023513.15227-1-zhangpeng.00@bytedance.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com> Reported-by: David Binderman <dcb314@hotmail.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-19maple_tree: simplify mas_wr_node_walk()Peng Zhang1-29/+5
Simplify code of mas_wr_node_walk() without changing functionality, and improve readability. Remove some special judgments. Instead of dynamically recording the min and max in the loop, get the final min and max directly at the end. Link: https://lkml.kernel.org/r/20230314124203.91572-3-zhangpeng.00@bytedance.com Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-19lib/test_vmalloc.c: add vm_map_ram()/vm_unmap_ram() test caseUladzislau Rezki (Sony)1-0/+37
Add vm_map_ram()/vm_unmap_ram() test case to our stress test-suite. [akpm@linux-foundation.org: fix whitespace, per Lorenzo] Link: https://lkml.kernel.org/r/20230330190639.431589-2-urezki@gmail.com Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sony.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-19sync mm-stable with mm-hotfixes-stable to pick up depended-upon upstream changesAndrew Morton1-23/+24
2023-04-19maple_tree: fix mas_empty_area() searchLiam R. Howlett1-9/+11
The internal function of mas_awalk() was incorrectly skipping the last entry in a node, which could potentially be NULL. This is only a problem for the left-most node in the tree - otherwise that NULL would not exist. Fix mas_awalk() by using the metadata to obtain the end of the node for the loop and the logical pivot as apposed to the raw pivot value. Link: https://lkml.kernel.org/r/20230414145728.4067069-2-Liam.Howlett@oracle.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-19maple_tree: make maple state reusable after mas_empty_area_rev()Liam R. Howlett1-14/+13
Stop using maple state min/max for the range by passing through pointers for those values. This will allow the maple state to be reused without resetting. Also add some logic to fail out early on searching with invalid arguments. Link: https://lkml.kernel.org/r/20230414145728.4067069-1-Liam.Howlett@oracle.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-17libcrc32c: remove crc32c_implChristoph Hellwig1-6/+0
This was only ever used by btrfs, and the usage just went away. This effectively reverts df91f56adce1 ("libcrc32c: Add crc32c_impl function"). Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-04-16sync mm-stable with mm-hotfixes-stable to pick up depended-upon upstream changesAndrew Morton1-109/+197
2023-04-16fault-inject: fix build error when FAULT_INJECTION_CONFIGFS=y and CONFIGFS_FS=mAkinobu Mita1-1/+2
This fixes a build error when CONFIG_FAULT_INJECTION_CONFIGFS=y and CONFIG_CONFIGFS_FS=m. Since the fault-injection library cannot built as a module, avoid building configfs as a module. Fixes: 4668c7a2940d ("fault-inject: allow configuration via configfs") Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202304150025.K0hczLR4-lkp@intel.com/ Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-16maple_tree: fix a potential memory leak, OOB access, or other unpredictable bugPeng Zhang1-12/+7
In mas_alloc_nodes(), "node->node_count = 0" means to initialize the node_count field of the new node, but the node may not be a new node. It may be a node that existed before and node_count has a value, setting it to 0 will cause a memory leak. At this time, mas->alloc->total will be greater than the actual number of nodes in the linked list, which may cause many other errors. For example, out-of-bounds access in mas_pop_node(), and mas_pop_node() may return addresses that should not be used. Fix it by initializing node_count only for new nodes. Also, by the way, an if-else statement was removed to simplify the code. Link: https://lkml.kernel.org/r/20230411041005.26205-1-zhangpeng.00@bytedance.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-16debugobject: Prevent init race with static objectsThomas Gleixner1-59/+66
Statically initialized objects are usually not initialized via the init() function of the subsystem. They are special cased and the subsystem provides a function to validate whether an object which is not yet tracked by debugobjects is statically initialized. This means the object is started to be tracked on first use, e.g. activation. This works perfectly fine, unless there are two concurrent operations on that object. Schspa decoded the problem: T0 T1 debug_object_assert_init(addr) lock_hash_bucket() obj = lookup_object(addr); if (!obj) { unlock_hash_bucket(); - > preemption lock_subsytem_object(addr); activate_object(addr) lock_hash_bucket(); obj = lookup_object(addr); if (!obj) { unlock_hash_bucket(); if (is_static_object(addr)) init_and_track(addr); lock_hash_bucket(); obj = lookup_object(addr); obj->state = ACTIVATED; unlock_hash_bucket(); subsys function modifies content of addr, so static object detection does not longer work. unlock_subsytem_object(addr); if (is_static_object(addr)) <- Fails debugobject emits a warning and invokes the fixup function which reinitializes the already active object in the worst case. This race exists forever, but was never observed until mod_timer() got a debug_object_assert_init() added which is outside of the timer base lock held section right at the beginning of the function to cover the lockless early exit points too. Rework the code so that the lookup, the static object check and the tracking object association happens atomically under the hash bucket lock. This prevents the issue completely as all callers are serialized on the hash bucket lock and therefore cannot observe inconsistent state. Fixes: 3ac7fe5a4aab ("infrastructure to debug (dynamic) objects") Reported-by: syzbot+5093ba19745994288b53@syzkaller.appspotmail.com Debugged-by: Schspa Shi <schspa@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://syzkaller.appspot.com/bug?id=22c8a5938eab640d1c6bcc0e3dc7be519d878462 Link: https://lore.kernel.org/lkml/20230303161906.831686-1-schspa@gmail.com Link: https://lore.kernel.org/r/87zg7dzgao.ffs@tglx
2023-04-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-99/+192
Conflicts: tools/testing/selftests/net/config 62199e3f1658 ("selftests: net: Add VXLAN MDB test") 3a0385be133e ("selftests: add the missing CONFIG_IP_SCTP in net config") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-13treewide: remove MODULE_LICENSE in non-modulesNick Alcock1-1/+0
Since commit 8b41fc4454e ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are used to identify modules. As a consequence, uses of the macro in non-modules will cause modprobe to misidentify their containing object file as a module when it is not (false positives), and modprobe might succeed rather than failing with a suitable error message. So remove it in the files in this commit, none of which can be built as modules. Signed-off-by: Nick Alcock <nick.alcock@oracle.com> Suggested-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: linux-modules@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-04-13btree: remove MODULE_LICENSE in non-modulesNick Alcock1-1/+0
Since commit 8b41fc4454e ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are used to identify modules. As a consequence, uses of the macro in non-modules will cause modprobe to misidentify their containing object file as a module when it is not (false positives), and modprobe might succeed rather than failing with a suitable error message. So remove it in the files in this commit, none of which can be built as modules. Signed-off-by: Nick Alcock <nick.alcock@oracle.com> Suggested-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: linux-modules@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-04-13lib: remove MODULE_LICENSE in non-modulesNick Alcock1-1/+0
Since commit 8b41fc4454e ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are used to identify modules. As a consequence, uses of the macro in non-modules will cause modprobe to misidentify their containing object file as a module when it is not (false positives), and modprobe might succeed rather than failing with a suitable error message. So remove it in the files in this commit, none of which can be built as modules. Signed-off-by: Nick Alcock <nick.alcock@oracle.com> Suggested-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: linux-modules@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com> Cc: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-04-13crypto: blake2s: remove module-related codeNick Alcock1-4/+0
Now blake2s-generic.c can no longer be a module, drop all remaining module-related code as well. Signed-off-by: Nick Alcock <nick.alcock@oracle.com> Requested-by: Herbert Xu <herbert@gondor.apana.org.au> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: linux-modules@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-04-13crypto: remove MODULE_LICENSE in non-modulesNick Alcock2-2/+0
Since commit 8b41fc4454e ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are used to identify modules. As a consequence, uses of the macro in non-modules will cause modprobe to misidentify their containing object file as a module when it is not (false positives), and modprobe might succeed rather than failing with a suitable error message. So remove it in the files in this commit, none of which can be built as modules. Signed-off-by: Nick Alcock <nick.alcock@oracle.com> Suggested-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: linux-modules@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-04-13fault-inject: allow configuration via configfsAkinobu Mita2-1/+203
This provides a helper function to allow configuration of fault-injection for configfs-based drivers. The config items created by this function have the same interface as the one created under debugfs by fault_create_debugfs_attr(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Link: https://lore.kernel.org/r/20230327143733.14599-2-akinobu.mita@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>