summaryrefslogtreecommitdiff
path: root/mm/cma.c
AgeCommit message (Collapse)AuthorFilesLines
2022-05-14Revert "mm/cma.c: remove redundant cma_mutex lock"Dong Aisheng1-1/+3
This reverts commit a4efc174b382fcdb which introduced a regression issue that when there're multiple processes allocating dma memory in parallel by calling dma_alloc_coherent(), it may fail sometimes as follows: Error log: cma: cma_alloc: linux,cma: alloc failed, req-size: 148 pages, ret: -16 cma: number of available pages: 3@125+20@172+12@236+4@380+32@736+17@2287+23@2473+20@36076+99@40477+108@40852+44@41108+20@41196+108@41364+108@41620+ 108@42900+108@43156+483@44061+1763@45341+1440@47712+20@49324+20@49388+5076@49452+2304@55040+35@58141+20@58220+20@58284+ 7188@58348+84@66220+7276@66452+227@74525+6371@75549=> 33161 free of 81920 total pages When issue happened, we saw there were still 33161 pages (129M) free CMA memory and a lot available free slots for 148 pages in CMA bitmap that we want to allocate. When dumping memory info, we found that there was also ~342M normal memory, but only 1352K CMA memory left in buddy system while a lot of pageblocks were isolated. Memory info log: Normal free:351096kB min:30000kB low:37500kB high:45000kB reserved_highatomic:0KB active_anon:98060kB inactive_anon:98948kB active_file:60864kB inactive_file:31776kB unevictable:0kB writepending:0kB present:1048576kB managed:1018328kB mlocked:0kB bounce:0kB free_pcp:220kB local_pcp:192kB free_cma:1352kB lowmem_reserve[]: 0 0 0 Normal: 78*4kB (UECI) 1772*8kB (UMECI) 1335*16kB (UMECI) 360*32kB (UMECI) 65*64kB (UMCI) 36*128kB (UMECI) 16*256kB (UMCI) 6*512kB (EI) 8*1024kB (UEI) 4*2048kB (MI) 8*4096kB (EI) 8*8192kB (UI) 3*16384kB (EI) 8*32768kB (M) = 489288kB The root cause of this issue is that since commit a4efc174b382 ("mm/cma.c: remove redundant cma_mutex lock"), CMA supports concurrent memory allocation. It's possible that the memory range process A trying to alloc has already been isolated by the allocation of process B during memory migration. The problem here is that the memory range isolated during one allocation by start_isolate_page_range() could be much bigger than the real size we want to alloc due to the range is aligned to MAX_ORDER_NR_PAGES. Taking an ARMv7 platform with 1G memory as an example, when MAX_ORDER_NR_PAGES is big (e.g. 32M with max_order 14) and CMA memory is relatively small (e.g. 128M), there're only 4 MAX_ORDER slot, then it's very easy that all CMA memory may have already been isolated by other processes when one trying to allocate memory using dma_alloc_coherent(). Since current CMA code will only scan one time of whole available CMA memory, then dma_alloc_coherent() may easy fail due to contention with other processes. This patch simply falls back to the original method that using cma_mutex to make alloc_contig_range() run sequentially to avoid the issue. Link: https://lkml.kernel.org/r/20220509094551.3596244-1-aisheng.dong@nxp.com Link: https://lore.kernel.org/all/20220315144521.3810298-2-aisheng.dong@nxp.com/ Fixes: a4efc174b382 ("mm/cma.c: remove redundant cma_mutex lock") Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Lecopzer Chen <lecopzer.chen@mediatek.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> [5.11+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-03-23mm/cma: provide option to opt out from exposing pages on activation failureHari Bathini1-2/+9
Patch series "powerpc/fadump: handle CMA activation failure appropriately", v3. Commit 072355c1cf2d ("mm/cma: expose all pages to the buddy if activation of an area fails") started exposing all pages to buddy allocator on CMA activation failure. But there can be CMA users that want to handle the reserved memory differently on CMA allocation failure. Provide an option to opt out from exposing pages to buddy for such cases. Link: https://lkml.kernel.org/r/20220117075246.36072-1-hbathini@linux.ibm.com Link: https://lkml.kernel.org/r/20220117075246.36072-2-hbathini@linux.ibm.com Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com> Cc: Sourabh Jain <sourabhjain@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23cma: factor out minimum alignment requirementDavid Hildenbrand1-15/+5
Patch series "mm: enforce pageblock_order < MAX_ORDER". Having pageblock_order >= MAX_ORDER seems to be able to happen in corner cases and some parts of the kernel are not prepared for it. For example, Aneesh has shown [1] that such kernels can be compiled on ppc64 with 64k base pages by setting FORCE_MAX_ZONEORDER=8, which will run into a WARN_ON_ONCE(order >= MAX_ORDER) in comapction code right during boot. We can get pageblock_order >= MAX_ORDER when the default hugetlb size is bigger than the maximum allocation granularity of the buddy, in which case we are no longer talking about huge pages but instead gigantic pages. Having pageblock_order >= MAX_ORDER can only make alloc_contig_range() of such gigantic pages more likely to succeed. Reliable use of gigantic pages either requires boot time allcoation or CMA, no need to overcomplicate some places in the kernel to optimize for corner cases that are broken in other areas of the kernel. This patch (of 2): Let's enforce pageblock_order < MAX_ORDER and simplify. Especially patch #1 can be regarded a cleanup before: [PATCH v5 0/6] Use pageblock_order for cma and alloc_contig_range alignment. [2] [1] https://lkml.kernel.org/r/87r189a2ks.fsf@linux.ibm.com [2] https://lkml.kernel.org/r/20220211164135.1803616-1-zi.yan@sent.com Link: https://lkml.kernel.org/r/20220214174132.219303-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: John Garry via iommu <iommu@lists.linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06memblock: rename memblock_free to memblock_phys_freeMike Rapoport1-1/+1
Since memblock_free() operates on a physical range, make its name reflect it and rename it to memblock_phys_free(), so it will be a logical counterpart to memblock_phys_alloc(). The callers are updated with the below semantic patch: @@ expression addr; expression size; @@ - memblock_free(addr, size); + memblock_phys_free(addr, size); Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Juergen Gross <jgross@suse.com> Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06mm/cma: add cma_pages_valid to determine if pages are in CMAMike Kravetz1-4/+20
Add new interface cma_pages_valid() which indicates if the specified pages are part of a CMA region. This interface will be used in a subsequent patch by hugetlb code. In order to keep the same amount of DEBUG information, a pr_debug() call was added to cma_pages_valid(). In the case where the page passed to cma_release is not in cma region, the debug message will be printed from cma_pages_valid as opposed to cma_release. Link: https://lkml.kernel.org/r/20211007181918.136982-3-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Nghia Le <nghialm78@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05mm: use proper type for cma_[alloc|release]Minchan Kim1-8/+9
size_t in cma_alloc is confusing since it makes people think it's byte count, not pages. Change it to unsigned long[1]. The unsigned int in cma_release is also not right so change it. Since we have unsigned long in cma_release, free_contig_range should also respect it. [1] 67a2e213e7e9, mm: cma: fix incorrect type conversion for size during dma allocation Link: https://lore.kernel.org/linux-mm/20210324043434.GP1719932@casper.infradead.org/ Link: https://lkml.kernel.org/r/20210331164018.710560-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05mm: cma: add the CMA instance name to cma trace eventsMinchan Kim1-3/+4
There were missing places to add cma instance name. To identify each CMA instance, let's add the name for every cma trace. This patch also changes the existing cma_trace_alloc to cma_trace_finish since we have cma_alloc_start[1]. [1] https://lore.kernel.org/linux-mm/20210324160740.15901-1-georgi.djakov@linaro.org Link: https://lkml.kernel.org/r/20210330220237.748899-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Liam Mark <lmark@codeaurora.org> Cc: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05mm: cma: support sysfsMinchan Kim1-2/+6
Since CMA is getting used more widely, it's more important to keep monitoring CMA statistics for system health since it's directly related to user experience. This patch introduces sysfs statistics for CMA, in order to provide some basic monitoring of the CMA allocator. * the number of CMA page successful allocations * the number of CMA page allocation failures These two values allow the user to calcuate the allocation failure rate for each CMA area. e.g.) /sys/kernel/mm/cma/WIFI/alloc_pages_[success|fail] /sys/kernel/mm/cma/SENSOR/alloc_pages_[success|fail] /sys/kernel/mm/cma/BLUETOOTH/alloc_pages_[success|fail] The cma_stat was intentionally allocated by dynamic allocation to harmonize with kobject lifetime management. https://lore.kernel.org/linux-mm/YCOAmXqt6dZkCQYs@kroah.com/ Link: https://lkml.kernel.org/r/20210324230759.2213957-1-minchan@kernel.org Link: https://lore.kernel.org/linux-mm/20210316100433.17665-1-colin.king@canonical.com/ Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Tested-by: Anders Roxell <anders.roxell@linaro.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: John Dias <joaodias@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05mm: cma: add trace events for CMA alloc perf testingLiam Mark1-0/+4
Add cma and migrate trace events to enable CMA allocation performance to be measured via ftrace. [georgi.djakov@linaro.org: add the CMA instance name to the cma_alloc_start trace event] Link: https://lkml.kernel.org/r/20210326155414.25006-1-georgi.djakov@linaro.org Link: https://lkml.kernel.org/r/20210324160740.15901-1-georgi.djakov@linaro.org Signed-off-by: Liam Mark <lmark@codeaurora.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05mm: cma: use pr_err_ratelimited for CMA warningBaolin Wang1-2/+2
If we did not reserve extra CMA memory, the log buffer can be easily filled up by CMA failure warning when the devices calling dmam_alloc_coherent() to alloc DMA memory. Thus we can use pr_err_ratelimited() instead to reduce the duplicate CMA warning. Link: https://lkml.kernel.org/r/ce2251ef49e1727a9a40531d1996660b05462bd2.1615279825.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05mm: vmstat: add cma statisticsMinchan Kim1-3/+9
Since CMA is used more widely, it's worth to have CMA allocation statistics into vmstat. With it, we could know how agressively system uses cma allocation and how often it fails. Link: https://lkml.kernel.org/r/20210302183346.3707237-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: John Dias <joaodias@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05mm/cma: change cma mutex to irq safe spinlockMike Kravetz1-9/+9
Patch series "make hugetlb put_page safe for all calling contexts", v5. This effort is the result a recent bug report [1]. Syzbot found a potential deadlock in the hugetlb put_page/free_huge_page_path. WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected Since the free_huge_page_path already has code to 'hand off' page free requests to a workqueue, a suggestion was proposed to make the in_irq() detection accurate by always enabling PREEMPT_COUNT [2]. The outcome of that discussion was that the hugetlb put_page path (free_huge_page) path should be properly fixed and safe for all calling contexts. [1] https://lore.kernel.org/linux-mm/000000000000f1c03b05bc43aadc@google.com/ [2] http://lkml.kernel.org/r/20210311021321.127500-1-mike.kravetz@oracle.com This patch (of 8): cma_release is currently a sleepable operatation because the bitmap manipulation is protected by cma->lock mutex. Hugetlb code which relies on cma_release for CMA backed (giga) hugetlb pages, however, needs to be irq safe. The lock doesn't protect any sleepable operation so it can be changed to a (irq aware) spin lock. The bitmap processing should be quite fast in typical case but if cma sizes grow to TB then we will likely need to replace the lock by a more optimized bitmap implementation. Link: https://lkml.kernel.org/r/20210409205254.242291-1-mike.kravetz@oracle.com Link: https://lkml.kernel.org/r/20210409205254.242291-2-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Muchun Song <songmuchun@bytedance.com> Cc: David Rientjes <rientjes@google.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: HORIGUCHI NAOYA <naoya.horiguchi@nec.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com> Cc: Waiman Long <longman@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Barry Song <song.bao.hua@hisilicon.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26mm: cma: print region name on failurePatrick Daly1-2/+2
Print the name of the CMA region for convenience. This is useful information to have when cma_alloc() fails. [pdaly@codeaurora.org: print the "count" variable] Link: https://lkml.kernel.org/r/20210209142414.12768-1-georgi.djakov@linaro.org Link: https://lkml.kernel.org/r/20210208115200.20286-1-georgi.djakov@linaro.org Signed-off-by: Patrick Daly <pdaly@codeaurora.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Acked-by: Minchan Kim <minchan@kernel.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26mm/cma: expose all pages to the buddy if activation of an area failsDavid Hildenbrand1-22/+21
Right now, if activation fails, we might already have exposed some pages to the buddy for CMA use (although they will never get actually used by CMA), and some pages won't be exposed to the buddy at all. Let's check for "single zone" early and on error, don't expose any pages for CMA use - instead, expose them to the buddy available for any use. Simply call free_reserved_page() on every single page - easier than going via free_reserved_area(), converting back and forth between pfns and virt addresses. In addition, make sure to fixup totalcma_pages properly. Example: 6 GiB QEMU VM with "... hugetlb_cma=2G movablecore=20% ...": [ 0.006891] hugetlb_cma: reserve 2048 MiB, up to 2048 MiB per node [ 0.006893] cma: Reserved 2048 MiB at 0x0000000100000000 [ 0.006893] hugetlb_cma: reserved 2048 MiB on node 0 ... [ 0.175433] cma: CMA area hugetlb0 could not be activated Before this patch: # cat /proc/meminfo MemTotal: 5867348 kB MemFree: 5692808 kB MemAvailable: 5542516 kB ... CmaTotal: 2097152 kB CmaFree: 1884160 kB After this patch: # cat /proc/meminfo MemTotal: 6077308 kB MemFree: 5904208 kB MemAvailable: 5747968 kB ... CmaTotal: 0 kB CmaFree: 0 kB Note: cma_init_reserved_mem() makes sure that we always cover full pageblocks / MAX_ORDER - 1 pages. Link: https://lkml.kernel.org/r/20210127101813.6370-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26mm: cma: allocate cma areas bottom-upRoman Gushchin1-0/+17
Currently cma areas without a fixed base are allocated close to the end of the node. This placement is sub-optimal because of compaction: it brings pages into the cma area. In particular, it can bring in hot executable pages, even if there is a plenty of free memory on the machine. This results in cma allocation failures. Instead let's place cma areas close to the beginning of a node. In this case the compaction will help to free cma areas, resulting in better cma allocation success rates. If there is enough memory let's try to allocate bottom-up starting with 4GB to exclude any possible interference with DMA32. On smaller machines or in a case of a failure, stick with the old behavior. 16GB vm, 2GB cma area: With this patch: [ 0.000000] Command line: root=/dev/vda3 rootflags=subvol=/root systemd.unified_cgroup_hierarchy=1 enforcing=0 console=ttyS0,115200 hugetlb_cma=2G [ 0.002928] hugetlb_cma: reserve 2048 MiB, up to 2048 MiB per node [ 0.002930] cma: Reserved 2048 MiB at 0x0000000100000000 [ 0.002931] hugetlb_cma: reserved 2048 MiB on node 0 Without this patch: [ 0.000000] Command line: root=/dev/vda3 rootflags=subvol=/root systemd.unified_cgroup_hierarchy=1 enforcing=0 console=ttyS0,115200 hugetlb_cma=2G [ 0.002930] hugetlb_cma: reserve 2048 MiB, up to 2048 MiB per node [ 0.002933] cma: Reserved 2048 MiB at 0x00000003c0000000 [ 0.002934] hugetlb_cma: reserved 2048 MiB on node 0 v2: - switched to memblock_set_bottom_up(true), by Mike - start with 4GB, by Mike [guro@fb.com: whitespace fix, per Mike] Link: https://lkml.kernel.org/r/20201221170551.GB3428478@carbon.DHCP.thefacebook.com [guro@fb.com: fix 32-bit warnings] Link: https://lkml.kernel.org/r/20201223163537.GA4011967@carbon.DHCP.thefacebook.com [guro@fb.com: fix 32-bit systems] [akpm@linux-foundation.org: build fix] Link: https://lkml.kernel.org/r/20201217201214.3414100-1-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Wonhyuk Yang <vvghjk1234@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Rik van Riel <riel@surriel.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15mm: cma: improve pr_debug log in cma_release()Charan Teja Reddy1-1/+1
It is required to print 'count' of pages, along with the pages, passed to cma_release to debug the cases of mismatched count value passed between cma_alloc() and cma_release() from a code path. As an example, consider the below scenario: 1) CMA pool size is 4MB and 2) User doing the erroneous step of allocating 2 pages but freeing 1 page in a loop from this CMA pool. The step 2 causes cma_alloc() to return NULL at one point of time because of -ENOMEM condition. And the current pr_debug logs is not giving the info about these types of allocation patterns because of count value not being printed in cma_release(). We are printing the count value in the trace logs, just extend the same to pr_debug logs too. [akpm@linux-foundation.org: fix printk warning] Link: https://lkml.kernel.org/r/1606318341-29521-1-git-send-email-charante@codeaurora.org Signed-off-by: Charan Teja Reddy <charante@codeaurora.org> Reviewed-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15mm/cma.c: remove redundant cma_mutex lockLecopzer Chen1-3/+1
The cma_mutex which protects alloc_contig_range() was first appeared in commit 7ee793a62fa8c ("cma: Remove potential deadlock situation"), at that time, there is no guarantee the behavior of concurrency inside alloc_contig_range(). After commit 2c7452a075d4db2dc ("mm/page_isolation.c: make start_isolate_page_range() fail if already isolated") > However, two subsystems (CMA and gigantic > huge pages for example) could attempt operations on the same range. If > this happens, one thread may 'undo' the work another thread is doing. > This can result in pageblocks being incorrectly left marked as > MIGRATE_ISOLATE and therefore not available for page allocation. The concurrency inside alloc_contig_range() was clarified. Now we can find that hugepage and virtio call alloc_contig_range() without any lock, thus cma_mutex is "redundant" in cma_alloc() now. Link: https://lkml.kernel.org/r/20201020102241.3729-1-lecopzer.chen@mediatek.com Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: YJ Chiang <yj.chiang@mediatek.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12cma: don't quit at first error when activating reserved areasMike Kravetz1-14/+9
The routine cma_init_reserved_areas is designed to activate all reserved cma areas. It quits when it first encounters an error. This can leave some areas in a state where they are reserved but not activated. There is no feedback to code which performed the reservation. Attempting to allocate memory from areas in such a state will result in a BUG. Modify cma_init_reserved_areas to always attempt to activate all areas. The called routine, cma_activate_area is responsible for leaving the area in a valid state. No one is making active use of returned error codes, so change the routine to void. How to reproduce: This example uses kernelcore, hugetlb and cma as an easy way to reproduce. However, this is a more general cma issue. Two node x86 VM 16GB total, 8GB per node Kernel command line parameters, kernelcore=4G hugetlb_cma=8G Related boot time messages, hugetlb_cma: reserve 8192 MiB, up to 4096 MiB per node cma: Reserved 4096 MiB at 0x0000000100000000 hugetlb_cma: reserved 4096 MiB on node 0 cma: Reserved 4096 MiB at 0x0000000300000000 hugetlb_cma: reserved 4096 MiB on node 1 cma: CMA area hugetlb could not be activated # echo 8 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI ... Call Trace: bitmap_find_next_zero_area_off+0x51/0x90 cma_alloc+0x1a5/0x310 alloc_fresh_huge_page+0x78/0x1a0 alloc_pool_huge_page+0x6f/0xf0 set_max_huge_pages+0x10c/0x250 nr_hugepages_store_common+0x92/0x120 ? __kmalloc+0x171/0x270 kernfs_fop_write+0xc1/0x1a0 vfs_write+0xc7/0x1f0 ksys_write+0x5f/0xe0 do_syscall_64+0x4d/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: c64be2bb1c6e ("drivers: add Contiguous Memory Allocator") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Roman Gushchin <guro@fb.com> Acked-by: Barry Song <song.bao.hua@hisilicon.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200730163123.6451-1-mike.kravetz@oracle.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12mm: cma: fix the name of CMA areasBarry Song1-8/+7
Patch series "mm: fix the names of general cma and hugetlb cma", v2. The current code of CMA can only work when users pass a const string as name parameter. we need to fix the way to handle names in CMA. On the other hand, to avoid name conflicts after enabling CMA_DEBUGFS, each hugetlb should get a different CMA name. This patch (of 2): If users give a name saved in stack, the current code will generate magic pointer. if users don't give a name(NULL), kasprintf() will always return NULL as we are at the early stage. that means cma_init_reserved_mem() will return -ENOMEM if users set name parameter as NULL. [natechancellor@gmail.com: return cma->name directly in cma_get_name] Link: https://github.com/ClangBuiltLinux/linux/issues/1063 Link: http://lkml.kernel.org/r/20200623015840.621964-1-natechancellor@gmail.com Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Roman Gushchin <guro@fb.com> Link: http://lkml.kernel.org/r/20200616223131.33828-2-song.bao.hua@hisilicon.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12mm/cma.c: fix NULL pointer dereference when cma could not be activatedJianqun Xu1-1/+1
In some case the cma area could not be activated, but the cma_alloc be used under this case, then the kernel will crash caused by NULL pointer dereference. Add bitmap valid check in cma_alloc to avoid this issue. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Link: http://lkml.kernel.org/r/20200615010123.15596-1-jay.xu@rock-chips.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-04mm/cma.c: use exact_nid true to fix possible per-numa cma leakBarry Song1-2/+2
Calling cma_declare_contiguous_nid() with false exact_nid for per-numa reservation can easily cause cma leak and various confusion. For example, mm/hugetlb.c is trying to reserve per-numa cma for gigantic pages. But it can easily leak cma and make users confused when system has memoryless nodes. In case the system has 4 numa nodes, and only numa node0 has memory. if we set hugetlb_cma=4G in bootargs, mm/hugetlb.c will get 4 cma areas for 4 different numa nodes. since exact_nid=false in current code, all 4 numa nodes will get cma successfully from node0, but hugetlb_cma[1 to 3] will never be available to hugepage will only allocate memory from hugetlb_cma[0]. In case the system has 4 numa nodes, both numa node0&2 has memory, other nodes have no memory. if we set hugetlb_cma=4G in bootargs, mm/hugetlb.c will get 4 cma areas for 4 different numa nodes. since exact_nid=false in current code, all 4 numa nodes will get cma successfully from node0 or 2, but hugetlb_cma[1] and [3] will never be available to hugepage as mm/hugetlb.c will only allocate memory from hugetlb_cma[0] and hugetlb_cma[2]. This causes permanent leak of the cma areas which are supposed to be used by memoryless node. Of cource we can workaround the issue by letting mm/hugetlb.c scan all cma areas in alloc_gigantic_page() even node_mask includes node0 only. that means when node_mask includes node0 only, we can get page from hugetlb_cma[1] to hugetlb_cma[3]. But this will cause kernel crash in free_gigantic_page() while it wants to free page by: cma_release(hugetlb_cma[page_to_nid(page)], page, 1 << order) On the other hand, exact_nid=false won't consider numa distance, it might be not that useful to leverage cma areas on remote nodes. I feel it is much simpler to make exact_nid true to make everything clear. After that, memoryless nodes won't be able to reserve per-numa CMA from other nodes which have memory. Fixes: cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma") Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Roman Gushchin <guro@fb.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Aslan Bakirov <aslan@fb.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andreas Schaufler <andreas.schaufler@gmx.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Rik van Riel <riel@surriel.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200628074345.27228-1-song.bao.hua@hisilicon.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-11mm: cma: NUMA node interfaceAslan Bakirov1-7/+9
I've noticed that there is no interface exposed by CMA which would let me to declare contigous memory on particular NUMA node. This patchset adds the ability to try to allocate contiguous memory on a specific node. It will fallback to other nodes if the specified one doesn't work. Implement a new method for declaring contigous memory on particular node and keep cma_declare_contiguous() as a wrapper. [akpm@linux-foundation.org: build fix] Signed-off-by: Aslan Bakirov <aslan@fb.com> Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@kernel.org> Cc: Andreas Schaufler <andreas.schaufler@gmx.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Rik van Riel <riel@surriel.com> Cc: Joonsoo Kim <js1304@gmail.com> Link: http://lkml.kernel.org/r/20200407163840.92263-2-guro@fb.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01mm/cma.c: switch to bitmap_zalloc() for cma bitmap allocationYunfeng Ye1-4/+2
kzalloc() is used for cma bitmap allocation in cma_activate_area(), switch to bitmap_zalloc() for clarity. Link: http://lkml.kernel.org/r/895d4627-f115-c77a-d454-c0a196116426@huawei.com Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Yue Hu <huyue2@yulong.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Ryohei Suzuki <ryh.szk.cmnty@gmail.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Doug Berger <opendmb@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17mm/cma.c: fail if fixed declaration can't be honoredDoug Berger1-0/+13
The description of cma_declare_contiguous() indicates that if the 'fixed' argument is true the reserved contiguous area must be exactly at the address of the 'base' argument. However, the function currently allows the 'base', 'size', and 'limit' arguments to be silently adjusted to meet alignment constraints. This commit enforces the documented behavior through explicit checks that return an error if the region does not fit within a specified region. Link: http://lkml.kernel.org/r/1561422051-16142-1-git-send-email-opendmb@gmail.com Fixes: 5ea3b1b2f8ad ("cma: add placement specifier for "cma=" kernel parameter") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Cc: Yue Hu <huyue2@yulong.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17mm/cma.c: fix a typo ("alloc_cma" -> "cma_alloc") in cma_release() commentsRyohei Suzuki1-1/+1
A comment referred to a non-existent function alloc_cma(), which should have been cma_alloc(). Link: http://lkml.kernel.org/r/20190712085549.5920-1-ryh.szk.cmnty@gmail.com Signed-off-by: Ryohei Suzuki <ryh.szk.cmnty@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 98Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your optional any later version of the license extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520075212.713472955@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14mm/cma.c: fix crash on CMA allocation if bitmap allocation failsYue Hu1-1/+3
f022d8cb7ec7 ("mm: cma: Don't crash on allocation if CMA area can't be activated") fixes the crash issue when activation fails via setting cma->count as 0, same logic exists if bitmap allocation fails. Link: http://lkml.kernel.org/r/20190325081309.6004-1-zbestahu@gmail.com Signed-off-by: Yue Hu <huyue2@yulong.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14mm/cma.c: fix the bitmap status to show failed allocation reasonYue Hu1-8/+11
Currently one bit in cma bitmap represents number of pages rather than one page, cma->count means cma size in pages. So to find available pages via find_next_zero_bit()/find_next_bit() we should use cma size not in pages but in bits although current free pages number is correct due to zero value of order_per_bit. Once order_per_bit is changed the bitmap status will be incorrect. The size input in cma_debug_show_areas() is not correct. It will affect the available pages at some position to debug the failure issue. This is an example with order_per_bit = 1 Before this change: [ 4.120060] cma: number of available pages: 1@93+4@108+7@121+7@137+7@153+7@169+7@185+7@201+3@213+3@221+3@229+3@237+3@245+3@253+3@261+3@269+3@277+3@285+3@293+3@301+3@309+3@317+3@325+19@333+15@369+512@512=> 638 free of 1024 total pages After this change: [ 4.143234] cma: number of available pages: 2@93+8@108+14@121+14@137+14@153+14@169+14@185+14@201+6@213+6@221+6@229+6@237+6@245+6@253+6@261+6@269+6@277+6@285+6@293+6@301+6@309+6@317+6@325+38@333+30@369=> 252 free of 1024 total pages Obviously the bitmap status before is incorrect. Link: http://lkml.kernel.org/r/20190320060829.9144-1-zbestahu@gmail.com Signed-off-by: Yue Hu <huyue2@yulong.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Laura Abbott <labbott@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12memblock: emphasize that memblock_alloc_range() returns a physical addressMike Rapoport1-6/+4
Rename memblock_alloc_range() to memblock_phys_alloc_range() to emphasize that it returns a physical address. While on it, remove the 'enum memblock_flags' parameter from this function as its only user anyway sets it to MEMBLOCK_NONE, which is the default for the most of memblock allocations. Link: http://lkml.kernel.org/r/1548057848-15136-6-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06mm/cma.c: cma_declare_contiguous: correct err handlingPeng Fan1-1/+3
In case cma_init_reserved_mem failed, need to free the memblock allocated by memblock_reserve or memblock_alloc_range. Quote Catalin's comments: https://lkml.org/lkml/2019/2/26/482 Kmemleak is supposed to work with the memblock_{alloc,free} pair and it ignores the memblock_reserve() as a memblock_alloc() implementation detail. It is, however, tolerant to memblock_free() being called on a sub-range or just a different range from a previous memblock_alloc(). So the original patch looks fine to me. FWIW: Link: http://lkml.kernel.org/r/20190227144631.16708-1-peng.fan@nxp.com Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28kasan, mm, arm64: tag non slab memory allocated via pageallocAndrey Konovalov1-0/+11
Tag-based KASAN doesn't check memory accesses through pointers tagged with 0xff. When page_address is used to get pointer to memory that corresponds to some page, the tag of the resulting pointer gets set to 0xff, even though the allocated memory might have been tagged differently. For slab pages it's impossible to recover the correct tag to return from page_address, since the page might contain multiple slab objects tagged with different values, and we can't know in advance which one of them is going to get accessed. For non slab pages however, we can recover the tag in page_address, since the whole page was marked with the same tag. This patch adds tagging to non slab memory allocated with pagealloc. To set the tag of the pointer returned from page_address, the tag gets stored to page->flags when the memory gets allocated. Link: http://lkml.kernel.org/r/d758ddcef46a5abc9970182b9137e2fbee202a2c.1544099024.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18mm/cma: remove unsupported gfp_mask parameter from cma_alloc()Marek Szyprowski1-4/+4
cma_alloc() doesn't really support gfp flags other than __GFP_NOWARN, so convert gfp_mask parameter to boolean no_warn parameter. This will help to avoid giving false feeling that this function supports standard gfp flags and callers can pass __GFP_ZERO to get zeroed buffer, what has already been an issue: see commit dd65a941f6ba ("arm64: dma-mapping: clear buffers allocated with FORCE_CONTIGUOUS flag"). Link: http://lkml.kernel.org/r/20180709122019eucas1p2340da484acfcc932537e6014f4fd2c29~-sqTPJKij2939229392eucas1p2j@eucas1p2.samsung.com Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Michał Nazarewicz <mina86@mina86.com> Acked-by: Laura Abbott <labbott@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Joonsoo Kim <js1304@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-24Revert "mm/cma: manage the memory of the CMA area by using the ZONE_MOVABLE"Joonsoo Kim1-72/+11
This reverts the following commits that change CMA design in MM. 3d2054ad8c2d ("ARM: CMA: avoid double mapping to the CMA area if CONFIG_HIGHMEM=y") 1d47a3ec09b5 ("mm/cma: remove ALLOC_CMA") bad8c6c0b114 ("mm/cma: manage the memory of the CMA area by using the ZONE_MOVABLE") Ville reported a following error on i386. Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) microcode: microcode updated early to revision 0x4, date = 2013-06-28 Initializing CPU#0 Initializing HighMem for node 0 (000377fe:00118000) Initializing Movable for node 0 (00000001:00118000) BUG: Bad page state in process swapper pfn:377fe page:f53effc0 count:0 mapcount:-127 mapping:00000000 index:0x0 flags: 0x80000000() raw: 80000000 00000000 00000000 ffffff80 00000000 00000100 00000200 00000001 page dumped because: nonzero mapcount Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.17.0-rc5-elk+ #145 Hardware name: Dell Inc. Latitude E5410/03VXMC, BIOS A15 07/11/2013 Call Trace: dump_stack+0x60/0x96 bad_page+0x9a/0x100 free_pages_check_bad+0x3f/0x60 free_pcppages_bulk+0x29d/0x5b0 free_unref_page_commit+0x84/0xb0 free_unref_page+0x3e/0x70 __free_pages+0x1d/0x20 free_highmem_page+0x19/0x40 add_highpages_with_active_regions+0xab/0xeb set_highmem_pages_init+0x66/0x73 mem_init+0x1b/0x1d7 start_kernel+0x17a/0x363 i386_start_kernel+0x95/0x99 startup_32_smp+0x164/0x168 The reason for this error is that the span of MOVABLE_ZONE is extended to whole node span for future CMA initialization, and, normal memory is wrongly freed here. I submitted the fix and it seems to work, but, another problem happened. It's so late time to fix the later problem so I decide to reverting the series. Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Laura Abbott <labbott@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-11mm/cma: manage the memory of the CMA area by using the ZONE_MOVABLEJoonsoo Kim1-11/+72
Patch series "mm/cma: manage the memory of the CMA area by using the ZONE_MOVABLE", v2. 0. History This patchset is the follow-up of the discussion about the "Introduce ZONE_CMA (v7)" [1]. Please reference it if more information is needed. 1. What does this patch do? This patch changes the management way for the memory of the CMA area in the MM subsystem. Currently the memory of the CMA area is managed by the zone where their pfn is belong to. However, this approach has some problems since MM subsystem doesn't have enough logic to handle the situation that different characteristic memories are in a single zone. To solve this issue, this patch try to manage all the memory of the CMA area by using the MOVABLE zone. In MM subsystem's point of view, characteristic of the memory on the MOVABLE zone and the memory of the CMA area are the same. So, managing the memory of the CMA area by using the MOVABLE zone will not have any problem. 2. Motivation There are some problems with current approach. See following. Although these problem would not be inherent and it could be fixed without this conception change, it requires many hooks addition in various code path and it would be intrusive to core MM and would be really error-prone. Therefore, I try to solve them with this new approach. Anyway, following is the problems of the current implementation. o CMA memory utilization First, following is the freepage calculation logic in MM. - For movable allocation: freepage = total freepage - For unmovable allocation: freepage = total freepage - CMA freepage Freepages on the CMA area is used after the normal freepages in the zone where the memory of the CMA area is belong to are exhausted. At that moment that the number of the normal freepages is zero, so - For movable allocation: freepage = total freepage = CMA freepage - For unmovable allocation: freepage = 0 If unmovable allocation comes at this moment, allocation request would fail to pass the watermark check and reclaim is started. After reclaim, there would exist the normal freepages so freepages on the CMA areas would not be used. FYI, there is another attempt [2] trying to solve this problem in lkml. And, as far as I know, Qualcomm also has out-of-tree solution for this problem. Useless reclaim: There is no logic to distinguish CMA pages in the reclaim path. Hence, CMA page is reclaimed even if the system just needs the page that can be usable for the kernel allocation. Atomic allocation failure: This is also related to the fallback allocation policy for the memory of the CMA area. Consider the situation that the number of the normal freepages is *zero* since the bunch of the movable allocation requests come. Kswapd would not be woken up due to following freepage calculation logic. - For movable allocation: freepage = total freepage = CMA freepage If atomic unmovable allocation request comes at this moment, it would fails due to following logic. - For unmovable allocation: freepage = total freepage - CMA freepage = 0 It was reported by Aneesh [3]. Useless compaction: Usual high-order allocation request is unmovable allocation request and it cannot be served from the memory of the CMA area. In compaction, migration scanner try to migrate the page in the CMA area and make high-order page there. As mentioned above, it cannot be usable for the unmovable allocation request so it's just waste. 3. Current approach and new approach Current approach is that the memory of the CMA area is managed by the zone where their pfn is belong to. However, these memory should be distinguishable since they have a strong limitation. So, they are marked as MIGRATE_CMA in pageblock flag and handled specially. However, as mentioned in section 2, the MM subsystem doesn't have enough logic to deal with this special pageblock so many problems raised. New approach is that the memory of the CMA area is managed by the MOVABLE zone. MM already have enough logic to deal with special zone like as HIGHMEM and MOVABLE zone. So, managing the memory of the CMA area by the MOVABLE zone just naturally work well because constraints for the memory of the CMA area that the memory should always be migratable is the same with the constraint for the MOVABLE zone. There is one side-effect for the usability of the memory of the CMA area. The use of MOVABLE zone is only allowed for a request with GFP_HIGHMEM && GFP_MOVABLE so now the memory of the CMA area is also only allowed for this gfp flag. Before this patchset, a request with GFP_MOVABLE can use them. IMO, It would not be a big issue since most of GFP_MOVABLE request also has GFP_HIGHMEM flag. For example, file cache page and anonymous page. However, file cache page for blockdev file is an exception. Request for it has no GFP_HIGHMEM flag. There is pros and cons on this exception. In my experience, blockdev file cache pages are one of the top reason that causes cma_alloc() to fail temporarily. So, we can get more guarantee of cma_alloc() success by discarding this case. Note that there is no change in admin POV since this patchset is just for internal implementation change in MM subsystem. Just one minor difference for admin is that the memory stat for CMA area will be printed in the MOVABLE zone. That's all. 4. Result Following is the experimental result related to utilization problem. 8 CPUs, 1024 MB, VIRTUAL MACHINE make -j16 <Before> CMA area: 0 MB 512 MB Elapsed-time: 92.4 186.5 pswpin: 82 18647 pswpout: 160 69839 <After> CMA : 0 MB 512 MB Elapsed-time: 93.1 93.4 pswpin: 84 46 pswpout: 183 92 akpm: "kernel test robot" reported a 26% improvement in vm-scalability.throughput: http://lkml.kernel.org/r/20180330012721.GA3845@yexl-desktop [1]: lkml.kernel.org/r/1491880640-9944-1-git-send-email-iamjoonsoo.kim@lge.com [2]: https://lkml.org/lkml/2014/10/15/623 [3]: http://www.spinics.net/lists/linux-mm/msg100562.html Link: http://lkml.kernel.org/r/1512114786-5085-2-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-06headers: untangle kmemleak.h from mm.hRandy Dunlap1-0/+1
Currently <linux/slab.h> #includes <linux/kmemleak.h> for no obvious reason. It looks like it's only a convenience, so remove kmemleak.h from slab.h and add <linux/kmemleak.h> to any users of kmemleak_* that don't already #include it. Also remove <linux/kmemleak.h> from source files that do not use it. This is tested on i386 allmodconfig and x86_64 allmodconfig. It would be good to run it through the 0day bot for other $ARCHes. I have neither the horsepower nor the storage space for the other $ARCHes. Update: This patch has been extensively build-tested by both the 0day bot & kisskb/ozlabs build farms. Both of them reported 2 build failures for which patches are included here (in v2). [ slab.h is the second most used header file after module.h; kernel.h is right there with slab.h. There could be some minor error in the counting due to some #includes having comments after them and I didn't combine all of those. ] [akpm@linux-foundation.org: security/keys/big_key.c needs vmalloc.h, per sfr] Link: http://lkml.kernel.org/r/e4309f98-3749-93e1-4bb7-d9501a39d015@infradead.org Link: http://kisskb.ellerman.id.au/kisskb/head/13396/ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Ingo Molnar <mingo@kernel.org> Reported-by: Michael Ellerman <mpe@ellerman.id.au> [2 build failures] Reported-by: Fengguang Wu <fengguang.wu@intel.com> [2 build failures] Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: John Johansen <john.johansen@canonical.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-06mm: kernel-doc: add missing parameter descriptionsMike Rapoport1-0/+5
Link: http://lkml.kernel.org/r/1519585191-10180-4-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16mm/cma.c: change pr_info to pr_err for cma_alloc fail logPintu Agarwal1-1/+1
It was observed that under cma_alloc fail log, pr_info was used instead of pr_err. This will lead to problems if printk debug level is set to below 7. In this case the cma_alloc failure log will not be captured in the log and it will be difficult to debug. Simply replace the pr_info with pr_err to capture failure log. Link: http://lkml.kernel.org/r/1507650633-4430-1-git-send-email-pintu.ping@gmail.com Signed-off-by: Pintu Agarwal <pintu.ping@gmail.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jaewon Kim <jaewon31.kim@samsung.com> Cc: Doug Berger <opendmb@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-14mm/cma.c: take __GFP_NOWARN into account in cma_alloc()Boris Brezillon1-1/+1
cma_alloc() unconditionally prints an INFO message when the CMA allocation fails. Make this message conditional on the non-presence of __GFP_NOWARN in gfp_mask. This patch aims at removing INFO messages that are displayed when the VC4 driver tries to allocate buffer objects. From the driver perspective an allocation failure is acceptable, and the driver can possibly do something to make following allocation succeed (like flushing the VC4 internal cache). Link: http://lkml.kernel.org/r/20171004125447.15195-1-boris.brezillon@free-electrons.com Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Laura Abbott <labbott@redhat.com> Cc: Jaewon Kim <jaewon31.kim@samsung.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-11cma: fix calculation of aligned offsetDoug Berger1-9/+6
The align_offset parameter is used by bitmap_find_next_zero_area_off() to represent the offset of map's base from the previous alignment boundary; the function ensures that the returned index, plus the align_offset, honors the specified align_mask. The logic introduced by commit b5be83e308f7 ("mm: cma: align to physical address, not CMA region position") has the cma driver calculate the offset to the *next* alignment boundary. In most cases, the base alignment is greater than that specified when making allocations, resulting in a zero offset whether we align up or down. In the example given with the commit, the base alignment (8MB) was half the requested alignment (16MB) so the math also happened to work since the offset is 8MB in both directions. However, when requesting allocations with an alignment greater than twice that of the base, the returned index would not be correctly aligned. Also, the align_order arguments of cma_bitmap_aligned_mask() and cma_bitmap_aligned_offset() should not be negative so the argument type was made unsigned. Fixes: b5be83e308f7 ("mm: cma: align to physical address, not CMA region position") Link: http://lkml.kernel.org/r/20170628170742.2895-1-opendmb@gmail.com Signed-off-by: Angus Clark <angus@angusclark.org> Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Cc: Doug Berger <opendmb@gmail.com> Cc: Angus Clark <angus@angusclark.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Shiraz Hashim <shashim@codeaurora.org> Cc: Jaewon Kim <jaewon31.kim@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-11mm/cma.c: warn if the CMA area could not be activatedAnshuman Khandual1-2/+3
While activating a CMA area we check to make sure that all the PFNs in the range are inside the same zone. This is a requirement for alloc_contig_range() to work. Any CMA area failing the check is disabled for good. This happens silently right now making all future cma_alloc() allocations failure inevitable. Here we add an error message stating that the CMA area could not be activated which makes it easier to explain any future cma_alloc() failures on it. While in there, change the bail out goto label from 'err' to 'not_in_zone' which makes more sense. Link: http://lkml.kernel.org/r/20170605023729.26303-1-khandual@linux.vnet.ibm.com Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-04-18cma: Introduce cma_for_each_areaLaura Abbott1-0/+14
Frameworks (e.g. Ion) may want to iterate over each possible CMA area to allow for enumeration. Introduce a function to allow a callback. Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-18cma: Store a name in the cma structureLaura Abbott1-2/+15
Frameworks that may want to enumerate CMA heaps (e.g. Ion) will find it useful to have an explicit name attached to each region. Store the name in each CMA structure. Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-25mm: cma: print allocation failure reason and bitmap statusJaewon Kim1-1/+33
There are many reasons of CMA allocation failure such as EBUSY, ENOMEM, EINTR. But we did not know error reason so far. This patch prints the error value. Additionally if CONFIG_CMA_DEBUG is enabled, this patch shows bitmap status to know available pages. Actually CMA internally tries on all available regions because some regions can be failed because of EBUSY. Bitmap status is useful to know in detail on both ENONEM and EBUSY; ENOMEM: not tried at all because of no available region it could be too small total region or could be fragmentation issue EBUSY: tried some region but all failed This is an ENOMEM example with this patch. [2: Binder:714_1: 744] cma: cma_alloc: alloc failed, req-size: 256 pages, ret: -12 If CONFIG_CMA_DEBUG is enabled, avabile pages also will be shown as concatenated size@position format. So 4@572 means that there are 4 available pages at 572 position starting from 0 position. [2: Binder:714_1: 744] cma: number of available pages: 4@572+7@585+7@601+8@632+38@730+166@1114+127@1921=> 357 free of 2048 total pages Link: http://lkml.kernel.org/r/1485909785-3952-1-git-send-email-jaewon31.kim@samsung.com Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25mm: cma_alloc: allow to specify GFP maskLucas Stach1-2/+3
Most users of this interface just want to use it with the default GFP_KERNEL flags, but for cases where DMA memory is allocated it may be called from a different context. No functional change yet, just passing through the flag to the underlying alloc_contig_range function. Link: http://lkml.kernel.org/r/20170127172328.18574-2-l.stach@pengutronix.de Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Alexander Graf <agraf@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25mm: alloc_contig_range: allow to specify GFP maskLucas Stach1-1/+2
Currently alloc_contig_range assumes that the compaction should be done with the default GFP_KERNEL flags. This is probably right for all current uses of this interface, but may change as CMA is used in more use-cases (including being the default DMA memory allocator on some platforms). Change the function prototype, to allow for passing through the GFP mask set by upper layers. Also respect global restrictions by applying memalloc_noio_flags to the passed in flags. Link: http://lkml.kernel.org/r/20170127172328.18574-1-l.stach@pengutronix.de Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Alexander Graf <agraf@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-11mm/cma: Cleanup highmem checkLaura Abbott1-10/+5
6b101e2a3ce4 ("mm/CMA: fix boot regression due to physical address of high_memory") added checks to use __pa_nodebug on x86 since CONFIG_DEBUG_VIRTUAL complains about high_memory not being linearlly mapped. arm64 is now getting support for CONFIG_DEBUG_VIRTUAL as well. Rather than add an explosion of arches to the #ifdef, switch to an alternate method to calculate the physical start of highmem using the page before highmem starts. This avoids the need for the #ifdef and extra __pa_nodebug calls. Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-11-11mm/cma.c: check the max limit for cma allocationShiraz Hashim1-0/+3
CMA allocation request size is represented by size_t that gets truncated when same is passed as int to bitmap_find_next_zero_area_off. We observe that during fuzz testing when cma allocation request is too high, bitmap_find_next_zero_area_off still returns success due to the truncation. This leads to kernel crash, as subsequent code assumes that requested memory is available. Fail cma allocation in case the request breaches the corresponding cma region size. Link: http://lkml.kernel.org/r/1478189211-3467-1-git-send-email-shashim@codeaurora.org Signed-off-by: Shiraz Hashim <shashim@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-12mm: kmemleak: avoid using __va() on addresses that don't have a lowmem mappingCatalin Marinas1-1/+1
Some of the kmemleak_*() callbacks in memblock, bootmem, CMA convert a physical address to a virtual one using __va(). However, such physical addresses may sometimes be located in highmem and using __va() is incorrect, leading to inconsistent object tracking in kmemleak. The following functions have been added to the kmemleak API and they take a physical address as the object pointer. They only perform the corresponding action if the address has a lowmem mapping: kmemleak_alloc_phys kmemleak_free_part_phys kmemleak_not_leak_phys kmemleak_ignore_phys The affected calling places have been updated to use the new kmemleak API. Link: http://lkml.kernel.org/r/1471531432-16503-1-git-send-email-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-28mm/cma: silence warnings due to max() usageStephen Rothwell1-3/+4
pageblock_order can be (at least) an unsigned int or an unsigned long depending on the kernel config and architecture, so use max_t(unsigned long, ...) when comparing it. fixes these warnings: In file included from include/asm-generic/bug.h:13:0, from arch/powerpc/include/asm/bug.h:127, from include/linux/bug.h:4, from include/linux/mmdebug.h:4, from include/linux/mm.h:8, from include/linux/memblock.h:18, from mm/cma.c:28: mm/cma.c: In function 'cma_init_reserved_mem': include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast (void) (&_max1 == &_max2); ^ mm/cma.c:186:27: note: in expansion of macro 'max' alignment = PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order); ^ mm/cma.c: In function 'cma_declare_contiguous': include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast (void) (&_max1 == &_max2); ^ include/linux/kernel.h:747:9: note: in definition of macro 'max' typeof(y) _max2 = (y); ^ mm/cma.c:270:29: note: in expansion of macro 'max' (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order)); ^ include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast (void) (&_max1 == &_max2); ^ include/linux/kernel.h:747:21: note: in definition of macro 'max' typeof(y) _max2 = (y); ^ mm/cma.c:270:29: note: in expansion of macro 'max' (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order)); ^ [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20160526150748.5be38a4f@canb.auug.org.au Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06mm/cma.c: suppress warningAndrew Morton1-2/+4
mm/cma.c: In function 'cma_alloc': mm/cma.c:366: warning: 'pfn' may be used uninitialized in this function The patch actually improves the tracing a bit: if alloc_contig_range() fails, tracing will display the offending pfn rather than -1. Cc: Stefan Strogin <stefan.strogin@gmail.com> Cc: Michal Nazarewicz <mpn@google.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>