| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Let's convert it to consume a folio.
[akpm@linux-foundation.org: fix kerneldoc]
Link: https://lkml.kernel.org/r/20231002142949.235104-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()".
Convert page_move_anon_rmap() to folio_move_anon_rmap(), letting the
callers handle PageAnonExclusive. I'm including cleanup patch #3 because
it fits into the picture and can be done cleaner by the conversion.
This patch (of 3):
Let's move it into the caller: there is a difference between whether an
anon folio can only be mapped by one process (e.g., into one VMA), and
whether it is truly exclusive (e.g., no references -- including GUP --
from other processes).
Further, for large folios the page might not actually be pointing at the
head page of the folio, so it better be handled in the caller. This is a
preparation for converting page_move_anon_rmap() to consume a folio.
Link: https://lkml.kernel.org/r/20231002142949.235104-1-david@redhat.com
Link: https://lkml.kernel.org/r/20231002142949.235104-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If large folio is in the range of VM_LOCKED VMA, it should be mlocked to
avoid being picked by page reclaim. Which may split the large folio and
then mlock each pages again.
Mlock this kind of large folio to prevent them being picked by page
reclaim.
For the large folio which cross the boundary of VM_LOCKED VMA or not fully
mapped to VM_LOCKED VMA, we'd better not to mlock it. So if the system is
under memory pressure, this kind of large folio will be split and the
pages ouf of VM_LOCKED VMA can be reclaimed.
Ideally, for large folio, we should mlock it when the large folio is fully
mapped to VMA and munlock it if any page are unmampped from VMA. But it's
not easy to detect whether the large folio is fully mapped to VMA in some
cases (like add/remove rmap). So we update mlock_vma_folio() and
munlock_vma_folio() to mlock/munlock the folio according to vma->vm_flags.
Let caller to decide whether they should call these two functions.
For add rmap, only mlock normal 4K folio and postpone large folio handling
to page reclaim phase. It is possible to reuse page table iterator to
detect whether folio is fully mapped or not during page reclaim phase.
For remove rmap, invoke munlock_vma_folio() to munlock folio unconditionly
because rmap makes folio not fully mapped to VMA.
Link: https://lkml.kernel.org/r/20230918073318.1181104-3-fengwei.yin@intel.com
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's pass a folio; we are always mapping the entire thing.
Link: https://lkml.kernel.org/r/20230913125113.313322-7-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's sanity-check PageAnonExclusive vs. mapcount in page_add_anon_rmap()
and hugepage_add_anon_rmap() after setting PageAnonExclusive simply by
re-reading the mapcounts.
We can stop initializing the "first" variable in page_add_anon_rmap() and
no longer need an atomic_inc_and_test() in hugepage_add_anon_rmap().
While at it, switch to VM_WARN_ON_FOLIO().
[david@redhat.com: update check for doubly-mapped page]
Link: https://lkml.kernel.org/r/d8e5a093-2e22-c14b-7e64-6da280398d9f@redhat.com
Link: https://lkml.kernel.org/r/20230913125113.313322-6-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If swapin code would ever decide to not use order-0 pages and supply a
PTE-mapped large folio, we will have to change how we call
__folio_set_anon() -- eventually with exclusive=false and an adjusted
address. For now, let's add a VM_WARN_ON_FOLIO() with a comment about the
situation.
Link: https://lkml.kernel.org/r/20230913125113.313322-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's handle it in the caller; no need for the "first" check based on the
mapcount.
We really only end up with !anon pages in page_add_anon_rmap() via
do_swap_page(), where we hold the folio lock. So races are not possible.
Add a VM_WARN_ON_FOLIO() to make sure that we really hold the folio lock.
In the future, we might want to let do_swap_page() use
folio_add_new_anon_rmap() on new pages instead: however, we might have to
pass then whether the folio is exclusive or not. So keep it in there for
now.
For hugetlb we never expect to have a non-anon page in
hugepage_add_anon_rmap(). Remove that code, along with some other checks
that are either not required or were checked in
hugepage_add_new_anon_rmap() already.
Link: https://lkml.kernel.org/r/20230913125113.313322-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's handle it in the caller. No need to pass the page. While at it,
rename the function to __folio_set_anon() and pass "bool exclusive"
instead of "int exclusive".
Link: https://lkml.kernel.org/r/20230913125113.313322-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Anon rmap cleanups".
Some cleanups around rmap for anon pages. I'm working on more cleanups
also around file rmap -- also to handle the "compound" parameter
internally only and to let hugetlb use page_add_file_rmap(), but these
changes make sense separately.
This patch (of 6):
That comment was added in commit 5dbe0af47f8a ("mm: fix kernel BUG at
mm/rmap.c:1017!") to document why we can see vma->vm_end getting adjusted
concurrently due to a VMA split.
However, the optimized locking code was changed again in bf181b9f9d8 ("mm
anon rmap: replace same_anon_vma linked list with an interval tree.").
... and later, the comment was changed in commit 0503ea8f5ba7 ("mm/mmap:
remove __vma_adjust()") to talk about "vma_merge" although the original
issue was with VMA splitting.
Let's just remove that comment. Nowadays, it's outdated, imprecise and
confusing.
Link: https://lkml.kernel.org/r/20230913125113.313322-1-david@redhat.com
Link: https://lkml.kernel.org/r/20230913125113.313322-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Fix set_huge_pte_at() panic on arm64", v2.
This series fixes a bug in arm64's implementation of set_huge_pte_at(),
which can result in an unprivileged user causing a kernel panic. The
problem was triggered when running the new uffd poison mm selftest for
HUGETLB memory. This test (and the uffd poison feature) was merged for
v6.5-rc7.
Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable
(correctly this time) to get it backported to v6.5, where the issue first
showed up.
Description of Bug
==================
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise,
it will dereference a bad pointer in page_folio():
static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry)
{
VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry));
return page_folio(pfn_to_page(swp_offset_pfn(entry)));
}
Fix
===
The simplest fix would have been to revert the dodgy cleanup commit
18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since
things have moved on, this would have required an audit of all the new
set_huge_pte_at() call sites to see if they should be converted to
set_huge_swap_pte_at(). As per the original intent of the change, it
would also leave us open to future bugs when people invariably get it
wrong and call the wrong helper.
So instead, I've added a huge page size parameter to set_huge_pte_at().
This means that the arm64 code has the size in all cases. It's a bigger
change, due to needing to touch the arches that implement the function,
but it is entirely mechanical, so in my view, low risk.
I've compile-tested all touched arches; arm64, parisc, powerpc, riscv,
s390, sparc (and additionally x86_64). I've additionally booted and run
mm selftests against arm64, where I observe the uffd poison test is fixed,
and there are no other regressions.
This patch (of 2):
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the pte is being set in set_huge_pte_at(). Provide for this by
adding an `unsigned long sz` parameter to the function. This follows the
same pattern as huge_pte_clear().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, parisc, powerpc,
riscv, s390, sparc). The actual arm64 bug will be fixed in a separate
commit.
No behavioral changes intended.
Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com
Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/swap: stop using page->private on tail pages for THP_SWAP
+ cleanups".
This series stops using page->private on tail pages for THP_SWAP, replaces
folio->private by folio->swap for swapcache folios, and starts using
"new_folio" for tail pages that we are splitting to remove the usage of
page->private for swapcache handling completely.
This patch (of 4):
Let's stop using page->private on tail pages, making it possible to just
unconditionally reuse that field in the tail pages of large folios.
The remaining usage of the private field for THP_SWAP is in the THP
splitting code (mm/huge_memory.c), that we'll handle separately later.
Update the THP_SWAP documentation and sanity checks in mm_types.h and
__split_huge_page_tail().
[david@redhat.com: stop using page->private on tail pages for THP_SWAP]
Link: https://lkml.kernel.org/r/6f0a82a3-6948-20d9-580b-be1dbf415701@redhat.com
Link: https://lkml.kernel.org/r/20230821160849.531668-1-david@redhat.com
Link: https://lkml.kernel.org/r/20230821160849.531668-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
folio_add_file_rmap_range() allows to add pte mapping to a specific range
of file folio. Comparing to page_add_file_rmap(), it batched updates
__lruvec_stat for large folio.
Link: https://lkml.kernel.org/r/20230802151406.3735276-36-willy@infradead.org
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mmu_notifier_invalidate_range_end()
Secondary TLBs are now invalidated from the architecture specific TLB
invalidation functions. Therefore there is no need to explicitly notify
or invalidate as part of the range end functions. This means we can
remove mmu_notifier_invalidate_range_end_only() and some of the
ptep_*_notify() functions.
Link: https://lkml.kernel.org/r/90d749d03cbab256ca0edeb5287069599566d783.1690292440.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Frederic Barrat <fbarrat@linux.ibm.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nicolin Chen <nicolinc@nvidia.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zhi Wang <zhi.wang.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
1. update page to folio in comment
2. add comment of new added @locked
Link: https://lkml.kernel.org/r/20230718092136.1935789-1-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently we'll flush the mm in flush_tlb_batched_pending() to avoid race
between reclaim unmaps pages by batched TLB flush and mprotect/munmap/etc.
Other architectures like arm64 may only need a synchronization
barrier(dsb) here rather than a full mm flush. So add
arch_flush_tlb_batched_pending() to allow an arch-specific implementation
here. This intends no functional changes on x86 since still a full mm
flush for x86.
Link: https://lkml.kernel.org/r/20230717131004.12662-4-yangyicong@huawei.com
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Barry Song <baohua@kernel.org>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Darren Hart <darren@os.amperecomputing.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: lipeifeng <lipeifeng@oppo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Zeng Tao <prime.zeng@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This patch does some preparation works to extend batched TLB flush to
arm64. Including:
- Extend set_tlb_ubc_flush_pending() and arch_tlbbatch_add_mm()
to accept an additional argument for address, architectures
like arm64 may need this for tlbi.
- Rename arch_tlbbatch_add_mm() to arch_tlbbatch_add_pending()
to match its current function since we don't need to handle
mm on architectures like arm64 and add_mm is not proper,
add_pending will make sense to both as on x86 we're pending the
TLB flush operations while on arm64 we're pending the synchronize
operations.
This intends no functional changes on x86.
Link: https://lkml.kernel.org/r/20230717131004.12662-3-yangyicong@huawei.com
Tested-by: Yicong Yang <yangyicong@hisilicon.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Punit Agrawal <punit.agrawal@bytedance.com>
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nadav Amit <namit@vmware.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Barry Song <baohua@kernel.org>
Cc: Darren Hart <darren@os.amperecomputing.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: lipeifeng <lipeifeng@oppo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zeng Tao <prime.zeng@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "arm64: support batched/deferred tlb shootdown during page
reclamation/migration", v11.
Though ARM64 has the hardware to do tlb shootdown, the hardware
broadcasting is not free. A simplest micro benchmark shows even on
snapdragon 888 with only 8 cores, the overhead for ptep_clear_flush is
huge even for paging out one page mapped by only one process: 5.36% a.out
[kernel.kallsyms] [k] ptep_clear_flush
While pages are mapped by multiple processes or HW has more CPUs, the cost
should become even higher due to the bad scalability of tlb shootdown.
The same benchmark can result in 16.99% CPU consumption on ARM64 server
with around 100 cores according to the test on patch 4/4.
This patchset leverages the existing BATCHED_UNMAP_TLB_FLUSH by
1. only send tlbi instructions in the first stage -
arch_tlbbatch_add_mm()
2. wait for the completion of tlbi by dsb while doing tlbbatch
sync in arch_tlbbatch_flush()
Testing on snapdragon shows the overhead of ptep_clear_flush is removed by
the patchset. The micro benchmark becomes 5% faster even for one page
mapped by single process on snapdragon 888.
Since BATCHED_UNMAP_TLB_FLUSH is implemented only on x86, the patchset
does some renaming/extension for the current implementation first (Patch
1-3), then add the support on arm64 (Patch 4).
This patch (of 4):
The entire scheme of deferred TLB flush in reclaim path rests on the fact
that the cost to refill TLB entries is less than flushing out individual
entries by sending IPI to remote CPUs. But architecture can have
different ways to evaluate that. Hence apart from checking
TTU_BATCH_FLUSH in the TTU flags, rest of the decision should be
architecture specific.
[yangyicong@hisilicon.com: rebase and fix incorrect return value type]
Link: https://lkml.kernel.org/r/20230717131004.12662-1-yangyicong@huawei.com
Link: https://lkml.kernel.org/r/20230717131004.12662-2-yangyicong@huawei.com
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
[https://lore.kernel.org/linuxppc-dev/20171101101735.2318-2-khandual@linux.vnet.ibm.com/]
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Punit Agrawal <punit.agrawal@bytedance.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Darren Hart <darren@os.amperecomputing.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: lipeifeng <lipeifeng@oppo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zeng Tao <prime.zeng@hisilicon.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Nadav Amit <namit@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The lone caller already has the folio, so pass it in instead of deriving
it from the page again.
Link: https://lkml.kernel.org/r/20230706195251.2707542-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Convert all instances of direct pte_t* dereferencing to instead use
ptep_get() helper. This means that by default, the accesses change from a
C dereference to a READ_ONCE(). This is technically the correct thing to
do since where pgtables are modified by HW (for access/dirty) they are
volatile and therefore we should always ensure READ_ONCE() semantics.
But more importantly, by always using the helper, it can be overridden by
the architecture to fully encapsulate the contents of the pte. Arch code
is deliberately not converted, as the arch code knows best. It is
intended that arch code (arm64) will override the default with its own
implementation that can (e.g.) hide certain bits from the core code, or
determine young/dirty status by mixing in state from another source.
Conversion was done using Coccinelle:
----
// $ make coccicheck \
// COCCI=ptepget.cocci \
// SPFLAGS="--include-headers" \
// MODE=patch
virtual patch
@ depends on patch @
pte_t *v;
@@
- *v
+ ptep_get(v)
----
Then reviewed and hand-edited to avoid multiple unnecessary calls to
ptep_get(), instead opting to store the result of a single call in a
variable, where it is correct to do so. This aims to negate any cost of
READ_ONCE() and will benefit arch-overrides that may be more complex.
Included is a fix for an issue in an earlier version of this patch that
was pointed out by kernel test robot. The issue arose because config
MMU=n elides definition of the ptep helper functions, including
ptep_get(). HUGETLB_PAGE=n configs still define a simple
huge_ptep_clear_flush() for linking purposes, which dereferences the ptep.
So when both configs are disabled, this caused a build error because
ptep_get() is not defined. Fix by continuing to do a direct dereference
when MMU=n. This is safe because for this config the arch code cannot be
trying to virtualize the ptes because none of the ptep helpers are
defined.
Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The only instances of get_user_pages_remote() invocations which used the
vmas parameter were for a single page which can instead simply look up the
VMA directly. In particular:-
- __update_ref_ctr() looked up the VMA but did nothing with it so we simply
remove it.
- __access_remote_vm() was already using vma_lookup() when the original
lookup failed so by doing the lookup directly this also de-duplicates the
code.
We are able to perform these VMA operations as we already hold the
mmap_lock in order to be able to call get_user_pages_remote().
As part of this work we add get_user_page_vma_remote() which abstracts the
VMA lookup, error handling and decrementing the page reference count should
the VMA lookup fail.
This forms part of a broader set of patches intended to eliminate the vmas
parameter altogether.
[akpm@linux-foundation.org: avoid passing NULL to PTR_ERR]
Link: https://lkml.kernel.org/r/d20128c849ecdbf4dd01cc828fcec32127ed939a.1684350871.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> (for arm64)
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com> (for s390)
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
0Day/LKP reported a performance regression for commit 7e12beb8ca2a
("migrate_pages: batch flushing TLB"). In the commit, the TLB flushing
during page migration is batched. So, in try_to_migrate_one(),
ptep_clear_flush() is replaced with set_tlb_ubc_flush_pending(). In
further investigation, it is found that the TLB flushing can be avoided in
ptep_clear_flush() if the PTE is inaccessible. In fact, we can optimize
in similar way for the batched TLB flushing too to improve the
performance.
So in this patch, we check pte_accessible() before
set_tlb_ubc_flush_pending() in try_to_unmap/migrate_one(). Tests show
that the benchmark score of the anon-cow-rand-mt test case of
vm-scalability test suite can improve up to 2.1% with the patch on a Intel
server machine. The TLB flushing IPI can reduce up to 44.3%.
Link: https://lore.kernel.org/oe-lkp/202303192325.ecbaf968-yujie.liu@intel.com
Link: https://lore.kernel.org/oe-lkp/ab92aaddf1b52ede15e2c608696c36765a2602c1.camel@intel.com/
Link: https://lkml.kernel.org/r/20230424065408.188498-1-ying.huang@intel.com
Fixes: 7e12beb8ca2a ("migrate_pages: batch flushing TLB")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: kernel test robot <yujie.liu@intel.com>
Reviewed-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Protect VMA from concurrent page fault handler while collapsing a huge
page. Page fault handler needs a stable PMD to use PTL and relies on
per-VMA lock to prevent concurrent PMD changes. pmdp_collapse_flush(),
set_huge_pmd() and collapse_and_free_pmd() can modify a PMD, which will
not be detected by a page fault handler without proper locking.
Before this patch, page tables can be walked under any one of the
mmap_lock, the mapping lock, and the anon_vma lock; so when khugepaged
unlinks and frees page tables, it must ensure that all of those either are
locked or don't exist. This patch adds a fourth lock under which page
tables can be traversed, and so khugepaged must also lock out that one.
[surenb@google.com: vm_lock/i_mmap_rwsem inversion in retract_page_tables]
Link: https://lkml.kernel.org/r/20230303213250.3555716-1-surenb@google.com
[surenb@google.com: build fix]
Link: https://lkml.kernel.org/r/CAJuCfpFjWhtzRE1X=J+_JjgJzNKhq-=JT8yTBSTHthwp0pqWZw@mail.gmail.com
Link: https://lkml.kernel.org/r/20230227173632.3292573-16-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use atomic_try_cmpxchg instead of atomic_cmpxchg (*ptr, old, new) == old
in set_tlb_ubc_flush_pending. 86 CMPXCHG instruction returns success in
ZF flag, so this change saves a compare after cmpxchg (and related move
instruction in front of cmpxchg).
Also, try_cmpxchg implicitly assigns old *ptr value to "old" when cmpxchg
fails.
No functional change intended.
Link: https://lkml.kernel.org/r/20230227214228.3533299-1-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After a memory error happens on a clean folio, a process unexpectedly
receives SIGBUS when it accesses the error page. This SIGBUS killing is
pointless and simply degrades the level of RAS of the system, because the
clean folio can be dropped without any data lost on memory error handling
as we do for a clean pagecache.
When memory_failure() is called on a clean folio, try_to_unmap() is called
twice (one from split_huge_page() and one from hwpoison_user_mappings()).
The root cause of the issue is that pte conversion to hwpoisoned entry is
now done in the first call of try_to_unmap() because PageHWPoison is
already set at this point, while it's actually expected to be done in the
second call. This behavior disturbs the error handling operation like
removing pagecache, which results in the malfunction described above.
So convert TTU_IGNORE_HWPOISON into TTU_HWPOISON and set TTU_HWPOISON only
when we really intend to convert pte to hwpoison entry. This can prevent
other callers of try_to_unmap() from accidentally converting to hwpoison
entries.
Link: https://lkml.kernel.org/r/20230221085905.1465385-1-naoya.horiguchi@linux.dev
Fixes: a42634a6c07d ("readahead: Use a folio in read_pages()")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The TLB flushing will cost quite some CPU cycles during the folio
migration in some situations. For example, when migrate a folio of a
process with multiple active threads that run on multiple CPUs. After
batching the _unmap and _move in migrate_pages(), the TLB flushing can be
batched easily with the existing TLB flush batching mechanism. This patch
implements that.
We use the following test case to test the patch.
On a 2-socket Intel server,
- Run pmbench memory accessing benchmark
- Run `migratepages` to migrate pages of pmbench between node 0 and
node 1 back and forth.
With the patch, the TLB flushing IPI reduces 99.1% during the test and the
number of pages migrated successfully per second increases 291.7%.
Haoxin helped to test the patchset on an ARM64 server with 128 cores, 2
NUMA nodes. Test results show that the page migration performance
increases up to 78%.
NOTE: TLB flushing is batched only for normal folios, not for THP folios.
Because the overhead of TLB flushing for THP folios is much lower than
that for normal folios (about 1/512 on x86 platform).
Link: https://lkml.kernel.org/r/20230213123444.155149-9-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Change alloc_huge_page() to alloc_hugetlb_folio() by changing all callers
to handle the now folio return type of the function. In this conversion,
alloc_huge_page_vma() is also changed to alloc_hugetlb_folio_vma() and
hugepage_add_new_anon_rmap() is changed to take in a folio directly. Many
additions of '&folio->page' are cleaned up in subsequent patches.
hugetlbfs_fallocate() is also refactored to use the RCU +
page_cache_next_miss() API.
Link: https://lkml.kernel.org/r/20230125170537.96973-5-sidhartha.kumar@oracle.com
Suggested-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Inline the work of __vma_adjust() into vma_merge(). This reduces code
size and has the added benefits of the comments for the cases being
located with the code.
Change the comments referencing vma_adjust() accordingly.
[Liam.Howlett@oracle.com: fix vma_merge() offset when expanding the next vma]
Link: https://lkml.kernel.org/r/20230130195713.2881766-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20230120162650.984577-49-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Avoid the compound_head() call in PageAnon() by passing in the folio that
all callers have. Also save me from wondering whether page->mapping can
ever be overwritten on a tail page (I don't think it can, but I'm not 100%
sure).
Link: https://lkml.kernel.org/r/20230116192959.2147032-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All callers now have a folio and can call munlock_vma_folio(). Update the
documentation to refer to munlock_vma_folio().
Link: https://lkml.kernel.org/r/20230116192827.2146732-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All callers now have a folio and can call mlock_vma_folio(). Update the
documentation to refer to mlock_vma_folio().
Link: https://lkml.kernel.org/r/20230116192827.2146732-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
__HAVE_ARCH_PTE_SWP_EXCLUSIVE is now supported by all architectures that
support swp PTEs, so let's drop it.
Link: https://lkml.kernel.org/r/20230113171026.582290-27-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update the mlock interface to accept folios rather than pages, bringing
the interface in line with the internal implementation.
munlock_vma_page() still requires a page_folio() conversion, however this
is consistent with the existent mlock_vma_page() implementation and a
product of rmap still dealing in pages rather than folios.
Link: https://lkml.kernel.org/r/cba12777c5544305014bc0cbec56bb4cc71477d8.1673526881.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that both callers use a folio, pass the folio in and save a call to
compound_head().
Link: https://lkml.kernel.org/r/20230111142915.1001531-28-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove uses of compound_mapcount_ptr()
Link: https://lkml.kernel.org/r/20230111142915.1001531-11-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In contrast to other rmap functions, page_add_new_anon_rmap() is always
called with a freshly allocated page. That means it can't be called with
a tail page. Turn page_add_new_anon_rmap() into folio_add_new_anon_rmap()
and add a page_add_new_anon_rmap() wrapper. Callers can be converted
individually.
[akpm@linux-foundation.org: fix NOMMU build. page_add_new_anon_rmap() requires CONFIG_MMU]
[willy@infradead.org: folio-compat.c needs rmap.h]
Link: https://lkml.kernel.org/r/20230111142915.1001531-9-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The API for page_add_file_rmap() needs to be page-based, because we can
add mappings of individual pages. But inside the function, we want to
only call compound_head() once and then use the folio APIs instead of the
page APIs that each call compound_head().
Link: https://lkml.kernel.org/r/20230111142915.1001531-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The API for page_add_anon_rmap() needs to be page-based, because we can
add mappings of individual pages. But inside the function, we want to
only call compound_head() once and then use the folio APIs instead of the
page APIs that each call compound_head().
Link: https://lkml.kernel.org/r/20230111142915.1001531-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The API for page_remove_rmap() needs to be page-based, because we can
remove mappings of pages individually. But inside the function, we want
to only call compound_head() once and then use the folio APIs instead of
the page APIs that each call compound_head().
Link: https://lkml.kernel.org/r/20230111142915.1001531-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Instead of enforcing that the argument must be a head page by naming,
enforce it with the compiler by making it a folio. Also rename the
counter in struct folio from _compound_mapcount to _entire_mapcount.
Link: https://lkml.kernel.org/r/20230111142915.1001531-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Calling this 'mapcount' is confusing since mapcount is usually the number
of times something is mapped; instead this is the number of mapped pages.
It's also better to enforce that this is a folio rather than a head page.
Move folio_nr_pages_mapped() into mm/internal.h since this is not
something we want device drivers or filesystems poking at. Get rid of
folio_subpages_mapcount_ptr() and use folio->_nr_pages_mapped directly.
Link: https://lkml.kernel.org/r/20230111142915.1001531-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mmu_notifier_range_update_to_read_only() was originally introduced in
commit c6d23413f81b ("mm/mmu_notifier:
mmu_notifier_range_update_to_read_only() helper") as an optimisation for
device drivers that know a range has only been mapped read-only. However
there are no users of this feature so remove it. As it is the only user
of the struct mmu_notifier_range.vma field remove that also.
Link: https://lkml.kernel.org/r/20230110025722.600912-1-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add vma_has_recency() to indicate whether a VMA may exhibit temporal
locality that the LRU algorithm relies on.
This function returns false for VMAs marked by VM_SEQ_READ or
VM_RAND_READ. While the former flag indicates linear access, i.e., a
special case of spatial locality, both flags indicate a lack of temporal
locality, i.e., the reuse of an area within a relatively small duration.
"Recency" is chosen over "locality" to avoid confusion between temporal
and spatial localities.
Before this patch, the active/inactive LRU only ignored the accessed bit
from VMAs marked by VM_SEQ_READ. After this patch, the active/inactive
LRU and MGLRU share the same logic: they both ignore the accessed bit if
vma_has_recency() returns false.
For the active/inactive LRU, the following fio test showed a [6, 8]%
increase in IOPS when randomly accessing mapped files under memory
pressure.
kb=$(awk '/MemTotal/ { print $2 }' /proc/meminfo)
kb=$((kb - 8*1024*1024))
modprobe brd rd_nr=1 rd_size=$kb
dd if=/dev/zero of=/dev/ram0 bs=1M
mkfs.ext4 /dev/ram0
mount /dev/ram0 /mnt/
swapoff -a
fio --name=test --directory=/mnt/ --ioengine=mmap --numjobs=8 \
--size=8G --rw=randrw --time_based --runtime=10m \
--group_reporting
The discussion that led to this patch is here [1]. Additional test
results are available in that thread.
[1] https://lore.kernel.org/r/Y31s%2FK8T85jh05wH@google.com/
Link: https://lkml.kernel.org/r/20221230215252.2628425-1-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Righi <andrea.righi@canonical.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The previous patch made sure charge moving only touches pages for which
page_mapped() is stable. lock_page_memcg() is no longer needed.
Link: https://lkml.kernel.org/r/20221206171340.139790-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 4b51634cd16a, introducing the COMPOUND_MAPPED bit, paid attention
to the impossibility of subpages_mapcount ever appearing negative; but did
not attend to those races in which it can momentarily appear larger than
thought possible.
These arise from how page_remove_rmap() first decrements page->_mapcount
or compound_mapcount, then, if that transition goes negative (logical 0),
decrements subpages_mapcount. The initial decrement lets a racing
page_add_*_rmap() reincrement _mapcount or compound_mapcount immediately,
and then in rare cases its corresponding increment of subpages_mapcount
may be completed before page_remove_rmap()'s decrement. There could even
(with increasing unlikelihood) be a series of increments intermixed with
the decrements.
In practice, checking subpages_mapcount with a temporary WARN on range,
has caught values of 0x1000000 (2*COMPOUND_MAPPED, when move_pages() was
using remove_migration_pmd()) and 0x800201 (do_huge_pmd_wp_page() using
__split_huge_pmd()): page_add_anon_rmap() racing page_remove_rmap(), as
predicted.
I certainly found it harder to reason about than when bit_spin_locked, but
the easy case gives a clue to how to handle the harder case. The easy
case being the three !(nr & COMPOUND_MAPPED) checks, which should
obviously be replaced by (nr < COMPOUND_MAPPED) checks - to count a page
as compound mapped, even while the bit in that position is 0.
The harder case is when trying to decide how many subpages are newly
covered or uncovered, when compound map is first added or last removed:
not knowing all that racily happened between first and second atomic ops.
But the easy way to handle that, is again to count the page as compound
mapped all the while that its subpages_mapcount indicates so - ignoring
the _mapcount or compound_mapcount transition while it is on the way to
being reversed.
Link: https://lkml.kernel.org/r/4388158-3092-a960-ff2d-55f2b0fe4ef8@google.com
Fixes: 4b51634cd16a ("mm,thp,rmap: subpages_mapcount COMPOUND_MAPPED if PMD-mapped")
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Can the lock_compound_mapcount() bit_spin_lock apparatus be removed now?
Yes. Not by atomic64_t or cmpxchg games, those get difficult on 32-bit;
but if we slightly abuse subpages_mapcount by additionally demanding that
one bit be set there when the compound page is PMD-mapped, then a cascade
of two atomic ops is able to maintain the stats without bit_spin_lock.
This is harder to reason about than when bit_spin_locked, but I believe
safe; and no drift in stats detected when testing. When there are racing
removes and adds, of course the sequence of operations is less well-
defined; but each operation on subpages_mapcount is atomically good. What
might be disastrous, is if subpages_mapcount could ever fleetingly appear
negative: but the pte lock (or pmd lock) these rmap functions are called
under, ensures that a last remove cannot race ahead of a first add.
Continue to make an exception for hugetlb (PageHuge) pages, though that
exception can be easily removed by a further commit if necessary: leave
subpages_mapcount 0, don't bother with COMPOUND_MAPPED in its case, just
carry on checking compound_mapcount too in folio_mapped(), page_mapped().
Evidence is that this way goes slightly faster than the previous
implementation in all cases (pmds after ptes now taking around 103ms); and
relieves us of worrying about contention on the bit_spin_lock.
Link: https://lkml.kernel.org/r/3978f3ca-5473-55a7-4e14-efea5968d892@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm,thp,rmap: rework the use of subpages_mapcount", v2.
This patch (of 3):
Following suggestion from Linus, instead of counting every PTE map of a
compound page in subpages_mapcount, just count how many of its subpages
are PTE-mapped: this yields the exact number needed for NR_ANON_MAPPED and
NR_FILE_MAPPED stats, without any need for a locked scan of subpages; and
requires updating the count less often.
This does then revert total_mapcount() and folio_mapcount() to needing a
scan of subpages; but they are inherently racy, and need no locking, so
Linus is right that the scans are much better done there. Plus (unlike in
6.1 and previous) subpages_mapcount lets us avoid the scan in the common
case of no PTE maps. And page_mapped() and folio_mapped() remain scanless
and just as efficient with the new meaning of subpages_mapcount: those are
the functions which I most wanted to remove the scan from.
The updated page_dup_compound_rmap() is no longer suitable for use by anon
THP's __split_huge_pmd_locked(); but page_add_anon_rmap() can be used for
that, so long as its VM_BUG_ON_PAGE(!PageLocked) is deleted.
Evidence is that this way goes slightly faster than the previous
implementation for most cases; but significantly faster in the (now
scanless) pmds after ptes case, which started out at 870ms and was brought
down to 495ms by the previous series, now takes around 105ms.
Link: https://lkml.kernel.org/r/a5849eca-22f1-3517-bf29-95d982242742@google.com
Link: https://lkml.kernel.org/r/eec17e16-4e1-7c59-f1bc-5bca90dac919@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit ("mm,thp,rmap: lock_compound_mapcounts() on THP mapcounts")
propagated the "if (compound) {lock} else if (PageCompound) {lock} else
{atomic}" pattern throughout; but Linus hated the way that gives primacy
to the uncommon case: switch to "if (!PageCompound) {atomic} else if
(compound) {lock} else {lock}" throughout. Linus has a bigger idea for
how to improve it all, but here just make that rearrangement.
Link: https://lkml.kernel.org/r/fca2f694-2098-b0ef-d4e-f1d8b94d318c@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix the races in maintaining compound_mapcount, subpages_mapcount and
subpage _mapcount by using PG_locked in the first tail of any compound
page for a bit_spin_lock() on such modifications; skipping the usual
atomic operations on those fields in this case.
Bring page_remove_file_rmap() and page_remove_anon_compound_rmap() back
into page_remove_rmap() itself. Rearrange page_add_anon_rmap() and
page_add_file_rmap() and page_remove_rmap() to follow the same "if
(compound) {lock} else if (PageCompound) {lock} else {atomic}" pattern
(with a PageTransHuge in the compound test, like before, to avoid BUG_ONs
and optimize away that block when THP is not configured). Move all the
stats updates outside, after the bit_spin_locked section, so that it is
sure to be a leaf lock.
Add page_dup_compound_rmap() to manage compound locking versus atomics in
sync with the rest. In particular, hugetlb pages are still using the
atomics: to avoid unnecessary interference there, and because they never
have subpage mappings; but this exception can easily be changed.
Conveniently, page_dup_compound_rmap() turns out to suit an anon THP's
__split_huge_pmd_locked() too.
bit_spin_lock() is not popular with PREEMPT_RT folks: but PREEMPT_RT
sensibly excludes TRANSPARENT_HUGEPAGE already, so its only exposure is to
the non-hugetlb non-THP pte-mapped compound pages (with large folios being
currently dependent on TRANSPARENT_HUGEPAGE). There is never any scan of
subpages in this case; but we have chosen to use PageCompound tests rather
than PageTransCompound tests to gate the use of lock_compound_mapcounts(),
so that page_mapped() is correct on all compound pages, whether or not
TRANSPARENT_HUGEPAGE is enabled: could that be a problem for PREEMPT_RT,
when there is contention on the lock - under heavy concurrent forking for
example? If so, then it can be turned into a sleeping lock (like
folio_lock()) when PREEMPT_RT.
A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took
18 seconds on small pages, and used to take 1 second on huge pages, but
now takes 115 milliseconds on huge pages. Mapping by pmds a second time
used to take 860ms and now takes 86ms; mapping by pmds after mapping by
ptes (when the scan is needed) used to take 870ms and now takes 495ms.
Mapping huge pages by ptes is largely unaffected but variable: between 5%
faster and 5% slower in what I've recorded. Contention on the lock is
likely to behave worse than contention on the atomics behaved.
Link: https://lkml.kernel.org/r/1b42bd1a-8223-e827-602f-d466c2db7d3c@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Compound page (folio) mapcount calculations have been different for anon
and file (or shmem) THPs, and involved the obscure PageDoubleMap flag.
And each huge mapping and unmapping of a file (or shmem) THP involved
atomically incrementing and decrementing the mapcount of every subpage of
that huge page, dirtying many struct page cachelines.
Add subpages_mapcount field to the struct folio and first tail page, so
that the total of subpage mapcounts is available in one place near the
head: then page_mapcount() and total_mapcount() and page_mapped(), and
their folio equivalents, are so quick that anon and file and hugetlb don't
need to be optimized differently. Delete the unloved PageDoubleMap.
page_add and page_remove rmap functions must now maintain the
subpages_mapcount as well as the subpage _mapcount, when dealing with pte
mappings of huge pages; and correct maintenance of NR_ANON_MAPPED and
NR_FILE_MAPPED statistics still needs reading through the subpages, using
nr_subpages_unmapped() - but only when first or last pmd mapping finds
subpages_mapcount raised (double-map case, not the common case).
But are those counts (used to decide when to split an anon THP, and in
vmscan's pagecache_reclaimable heuristic) correctly maintained? Not
quite: since page_remove_rmap() (and also split_huge_pmd()) is often
called without page lock, there can be races when a subpage pte mapcount
0<->1 while compound pmd mapcount 0<->1 is scanning - races which the
previous implementation had prevented. The statistics might become
inaccurate, and even drift down until they underflow through 0. That is
not good enough, but is better dealt with in a followup patch.
Update a few comments on first and second tail page overlaid fields.
hugepage_add_new_anon_rmap() has to "increment" compound_mapcount, but
subpages_mapcount and compound_pincount are already correctly at 0, so
delete its reinitialization of compound_pincount.
A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took
18 seconds on small pages, and used to take 1 second on huge pages, but
now takes 119 milliseconds on huge pages. Mapping by pmds a second time
used to take 860ms and now takes 92ms; mapping by pmds after mapping by
ptes (when the scan is needed) used to take 870ms and now takes 495ms.
But there might be some benchmarks which would show a slowdown, because
tail struct pages now fall out of cache until final freeing checks them.
Link: https://lkml.kernel.org/r/47ad693-717-79c8-e1ba-46c3a6602e48@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A trivial cleanup to move clearing of RestoreReserve into adding anon rmap
of private hugetlb mappings. It matches with the shared mappings where we
only clear the bit when adding into page cache, rather than spreading it
around the code paths.
Link: https://lkml.kernel.org/r/20221020193832.776173-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
