summaryrefslogtreecommitdiff
path: root/mm/workingset.c
AgeCommit message (Collapse)AuthorFilesLines
2023-08-25mm: memcg: use rstat for non-hierarchical statsYosry Ahmed1-0/+1
Currently, memcg uses rstat to maintain aggregated hierarchical stats. Counters are maintained for hierarchical stats at each memcg. Rstat tracks which cgroups have updates on which cpus to keep those counters fresh on the read-side. Non-hierarchical stats are currently not covered by rstat. Their per-cpu counters are summed up on every read, which is expensive. The original implementation did the same. At some point before rstat, non-hierarchical aggregated counters were introduced by commit a983b5ebee57 ("mm: memcontrol: fix excessive complexity in memory.stat reporting"). However, those counters were updated on the performance critical write-side, which caused regressions, so they were later removed by commit 815744d75152 ("mm: memcontrol: don't batch updates of local VM stats and events"). See [1] for more detailed history. Kernel versions in between a983b5ebee57 & 815744d75152 (a year and a half) enjoyed cheap reads of non-hierarchical stats, specifically on cgroup v1. When moving to more recent kernels, a performance regression for reading non-hierarchical stats is observed. Now that we have rstat, we know exactly which percpu counters have updates for each stat. We can maintain non-hierarchical counters again, making reads much more efficient, without affecting the performance critical write-side. Hence, add non-hierarchical (i.e local) counters for the stats, and extend rstat flushing to keep those up-to-date. A caveat is that we now need a stats flush before reading local/non-hierarchical stats through {memcg/lruvec}_page_state_local() or memcg_events_local(), where we previously only needed a flush to read hierarchical stats. Most contexts reading non-hierarchical stats are already doing a flush, add a flush to the only missing context in count_shadow_nodes(). With this patch, reading memory.stat from 1000 memcgs is 3x faster on a machine with 256 cpus on cgroup v1: # for i in $(seq 1000); do mkdir /sys/fs/cgroup/memory/cg$i; done # time cat /sys/fs/cgroup/memory/cg*/memory.stat > /dev/null real 0m0.125s user 0m0.005s sys 0m0.120s After: real 0m0.032s user 0m0.005s sys 0m0.027s To make sure there are no regressions on cgroup v2, I ran an artificial reclaim/refault stress test [2] that creates (NR_CPUS * 2) cgroups, assigns them limits, runs a worker process in each cgroup that allocates tmpfs memory equal to quadruple the limit (to invoke reclaim continuously), and then reads back the entire file (to invoke refaults). All workers are run in parallel, and zram is used as a swapping backend. Both reclaim and refault have conditional stats flushing. I ran this on a machine with 112 cpus, once on mm-unstable, and once on mm-unstable with this patch reverted. (1) A few runs without this patch: # time ./stress_reclaim_refault.sh real 0m9.949s user 0m0.496s sys 14m44.974s # time ./stress_reclaim_refault.sh real 0m10.049s user 0m0.486s sys 14m55.791s # time ./stress_reclaim_refault.sh real 0m9.984s user 0m0.481s sys 14m53.841s (2) A few runs with this patch: # time ./stress_reclaim_refault.sh real 0m9.885s user 0m0.486s sys 14m48.753s # time ./stress_reclaim_refault.sh real 0m9.903s user 0m0.495s sys 14m48.339s # time ./stress_reclaim_refault.sh real 0m9.861s user 0m0.507s sys 14m49.317s No regressions are observed with this patch. There is actually a very slight improvement. If I have to guess, maybe it's because we avoid the percpu loop in count_shadow_nodes() when calling lruvec_page_state_local(), but I could not prove this using perf, it's probably in the noise. [1] https://lore.kernel.org/lkml/20230725201811.GA1231514@cmpxchg.org/ [2] https://lore.kernel.org/lkml/CAJD7tkb17x=qwoO37uxyYXLEUVp15BQKR+Xfh7Sg9Hx-wTQ_=w@mail.gmail.com/ Link: https://lkml.kernel.org/r/20230803185046.1385770-1-yosryahmed@google.com Link: https://lkml.kernel.org/r/20230726153223.821757-2-yosryahmed@google.com Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-10Multi-gen LRU: fix workingset accountingKalesh Singh1-3/+7
On Android app cycle workloads, MGLRU showed a significant reduction in workingset refaults although pgpgin/pswpin remained relatively unchanged. This indicated MGLRU may be undercounting workingset refaults. This has impact on userspace programs, like Android's LMKD, that monitor workingset refault statistics to detect thrashing. It was found that refaults were only accounted if the MGLRU shadow entry was for a recently evicted folio. However, recently evicted folios should be accounted as workingset activation, and refaults should be accounted regardless of recency. Fix MGLRU's workingset refault and activation accounting to more closely match that of the conventional active/inactive LRU. Link: https://lkml.kernel.org/r/20230523205922.3852731-1-kaleshsingh@google.com Fixes: ac35a4902374 ("mm: multi-gen LRU: minimal implementation") Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Reported-by: Charan Teja Kalla <quic_charante@quicinc.com> Acked-by: Yu Zhao <yuzhao@google.com> Cc: Brian Geffon <bgeffon@google.com> Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Cc: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-10mm: multi-gen LRU: cleanup lru_gen_test_recent()T.J. Alumbaugh1-30/+16
Avoid passing memcg* and pglist_data* to lru_gen_test_recent() since we only use the lruvec anyway. Link: https://lkml.kernel.org/r/20230522112058.2965866-4-talumbau@google.com Signed-off-by: T.J. Alumbaugh <talumbau@google.com> Reviewed-by: Yuanchu Xie <yuanchu@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-10workingset: refactor LRU refault to expose refault recency checkNhat Pham1-48/+102
Patch series "cachestat: a new syscall for page cache state of files", v13. There is currently no good way to query the page cache statistics of large files and directory trees. There is mincore(), but it scales poorly: the kernel writes out a lot of bitmap data that userspace has to aggregate, when the user really does not care about per-page information in that case. The user also needs to mmap and unmap each file as it goes along, which can be quite slow as well. Some use cases where this information could come in handy: * Allowing database to decide whether to perform an index scan or direct table queries based on the in-memory cache state of the index. * Visibility into the writeback algorithm, for performance issues diagnostic. * Workload-aware writeback pacing: estimating IO fulfilled by page cache (and IO to be done) within a range of a file, allowing for more frequent syncing when and where there is IO capacity, and batching when there is not. * Computing memory usage of large files/directory trees, analogous to the du tool for disk usage. More information about these use cases could be found in this thread: https://lore.kernel.org/lkml/20230315170934.GA97793@cmpxchg.org/ This series of patches introduces a new system call, cachestat, that summarizes the page cache statistics (number of cached pages, dirty pages, pages marked for writeback, evicted pages etc.) of a file, in a specified range of bytes. It also include a selftest suite that tests some typical usage. Currently, the syscall is only wired in for x86 architecture. This interface is inspired by past discussion and concerns with fincore, which has a similar design (and as a result, issues) as mincore. Relevant links: https://lkml.indiana.edu/hypermail/linux/kernel/1302.1/04207.html https://lkml.indiana.edu/hypermail/linux/kernel/1302.1/04209.html I have also developed a small tool that computes the memory usage of files and directories, analogous to the du utility. User can choose between mincore or cachestat (with cachestat exporting more information than mincore). To compare the performance of these two options, I benchmarked the tool on the root directory of a Meta's server machine, each for five runs: Using cachestat real -- Median: 33.377s, Average: 33.475s, Standard Deviation: 0.3602 user -- Median: 4.08s, Average: 4.1078s, Standard Deviation: 0.0742 sys -- Median: 28.823s, Average: 28.8866s, Standard Deviation: 0.2689 Using mincore: real -- Median: 102.352s, Average: 102.3442s, Standard Deviation: 0.2059 user -- Median: 10.149s, Average: 10.1482s, Standard Deviation: 0.0162 sys -- Median: 91.186s, Average: 91.2084s, Standard Deviation: 0.2046 I also ran both syscalls on a 2TB sparse file: Using cachestat: real 0m0.009s user 0m0.000s sys 0m0.009s Using mincore: real 0m37.510s user 0m2.934s sys 0m34.558s Very large files like this are the pathological case for mincore. In fact, to compute the stats for a single 2TB file, mincore takes as long as cachestat takes to compute the stats for the entire tree! This could easily happen inadvertently when we run it on subdirectories. Mincore is clearly not suitable for a general-purpose command line tool. Regarding security concerns, cachestat() should not pose any additional issues. The caller already has read permission to the file itself (since they need an fd to that file to call cachestat). This means that the caller can access the underlying data in its entirety, which is a much greater source of information (and as a result, a much greater security risk) than the cache status itself. The latest API change (in v13 of the patch series) is suggested by Jens Axboe. It allows for 64-bit length argument, even on 32-bit architecture (which is previously not possible due to the limit on the number of syscall arguments). Furthermore, it eliminates the need for compatibility handling - every user can use the same ABI. This patch (of 4): In preparation for computing recently evicted pages in cachestat, refactor workingset_refault and lru_gen_refault to expose a helper function that would test if an evicted page is recently evicted. [penguin-kernel@I-love.SAKURA.ne.jp: add missing rcu_read_unlock() in lru_gen_refault()] Link: https://lkml.kernel.org/r/610781bc-cf11-fc89-a46f-87cb8235d439@I-love.SAKURA.ne.jp Link: https://lkml.kernel.org/r/20230503013608.2431726-1-nphamcs@gmail.com Link: https://lkml.kernel.org/r/20230503013608.2431726-2-nphamcs@gmail.com Signed-off-by: Nhat Pham <nphamcs@gmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Brian Foster <bfoster@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-19mm: workingset: update description of the source fileYang Yang1-6/+17
The calculation of workingset size is the core logic of handling refault, it had been updated several times[1][2] after workingset.c was created[3]. But the description hadn't been updated accordingly, this mismatch may confuse the readers. So we update the description to make it consistent to the code. [1] commit 34e58cac6d8f ("mm: workingset: let cache workingset challenge anon") [2] commit aae466b0052e ("mm/swap: implement workingset detection for anonymous LRU") [3] commit a528910e12ec ("mm: thrash detection-based file cache sizing") Link: https://lkml.kernel.org/r/202304131634494948454@zte.com.cn Signed-off-by: Yang Yang <yang.yang29@zte.com.cn> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-19workingset: memcg: sleep when flushing stats in workingset_refault()Yosry Ahmed1-2/+3
In workingset_refault(), we call mem_cgroup_flush_stats_atomic_ratelimited() to read accurate stats within an RCU read section and with sleeping disallowed. Move the call above the RCU read section to make it non-atomic. Flushing is an expensive operation that scales with the number of cpus and the number of cgroups in the system, so avoid doing it atomically where possible. Since workingset_refault() is the only caller of mem_cgroup_flush_stats_atomic_ratelimited(), just make it non-atomic, and rename it to mem_cgroup_flush_stats_ratelimited(). Link: https://lkml.kernel.org/r/20230330191801.1967435-7-yosryahmed@google.com Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Tejun Heo <tj@kernel.org> Cc: Vasily Averin <vasily.averin@linux.dev> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-19memcg: sleep during flushing stats in safe contextsYosry Ahmed1-1/+1
Currently, all contexts that flush memcg stats do so with sleeping not allowed. Some of these contexts are perfectly safe to sleep in, such as reading cgroup files from userspace or the background periodic flusher. Flushing is an expensive operation that scales with the number of cpus and the number of cgroups in the system, so avoid doing it atomically where possible. Refactor the code to make mem_cgroup_flush_stats() non-atomic (aka sleepable), and provide a separate atomic version. The atomic version is used in reclaim, refault, writeback, and in mem_cgroup_usage(). All other code paths are left to use the non-atomic version. This includes callbacks for userspace reads and the periodic flusher. Since refault is the only caller of mem_cgroup_flush_stats_ratelimited(), change it to mem_cgroup_flush_stats_atomic_ratelimited(). Reclaim and refault code paths are modified to do non-atomic flushing in separate later patches -- so it will eventually be changed back to mem_cgroup_flush_stats_ratelimited(). Link: https://lkml.kernel.org/r/20230330191801.1967435-6-yosryahmed@google.com Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Tejun Heo <tj@kernel.org> Cc: Vasily Averin <vasily.averin@linux.dev> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-19memcg: rename mem_cgroup_flush_stats_"delayed" to "ratelimited"Yosry Ahmed1-1/+1
mem_cgroup_flush_stats_delayed() suggests his is using a delayed_work, but this is actually sometimes flushing directly from the callsite. What it's doing is ratelimited calls. A better name would be mem_cgroup_flush_stats_ratelimited(). Link: https://lkml.kernel.org/r/20230330191801.1967435-3-yosryahmed@google.com Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Tejun Heo <tj@kernel.org> Cc: Vasily Averin <vasily.averin@linux.dev> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-03swap_state: update shadow_nodes for anonymous pageYang Yang1-8/+13
Shadow_nodes is for shadow nodes reclaiming of workingset handling, it is updated when page cache add or delete since long time ago workingset only supported page cache. But when workingset supports anonymous page detection, we missied updating shadow nodes for it. This caused that shadow nodes of anonymous page will never be reclaimd by scan_shadow_nodes() even they use much memory and system memory is tense. So update shadow_nodes of anonymous page when swap cache is add or delete by calling xas_set_update(..workingset_update_node). Link: https://lkml.kernel.org/r/202301182013032211005@zte.com.cn Fixes: aae466b0052e ("mm/swap: implement workingset detection for anonymous LRU") Signed-off-by: Yang Yang <yang.yang29@zte.com.cn> Reviewed-by: Ran Xiaokai <ran.xiaokai@zte.com.cn> Cc: Bagas Sanjaya <bagasdotme@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-19workingset: fix confusion around eviction vs refault containerJohannes Weiner1-1/+2
Refault decisions are made based on the lruvec where the page was evicted, as that determined its LRU order while it was alive. Stats and workingset aging must then occur on the lruvec of the new page, as that's the node and cgroup that experience the refault and that's the lruvec whose nonresident info ages out by a new resident page. Those lruvecs could be different when a page is shared between cgroups, or the refaulting page is allocated on a different node. There are currently two mix-ups: 1. When swap is available, the resident anon set must be considered when comparing the refault distance. The comparison is made against the right anon set, but the check for swap is not. When pages get evicted from a cgroup with swap, and refault in one without, this can incorrectly consider a hot refault as cold - and vice versa. Fix that by using the eviction cgroup for the swap check. 2. The stats and workingset age are updated against the wrong lruvec altogether: the right cgroup but the wrong NUMA node. When a page refaults on a different NUMA node, this will have confusing stats and distort the workingset age on a different lruvec - again possibly resulting in hot/cold misclassifications down the line. Fix the swap check and the refault pgdat to address both concerns. This was found during code review. It hasn't caused notable issues in production, suggesting that those refault-migrations are relatively rare in practice. Link: https://lkml.kernel.org/r/20230104222944.2380117-1-nphamcs@gmail.com Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Co-developed-by: Nhat Pham <nphamcs@gmail.com> Signed-off-by: Nhat Pham <nphamcs@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-19mm: multi-gen LRU: rename lru_gen_struct to lru_gen_folioYu Zhao1-2/+2
Patch series "mm: multi-gen LRU: memcg LRU", v3. Overview ======== An memcg LRU is a per-node LRU of memcgs. It is also an LRU of LRUs, since each node and memcg combination has an LRU of folios (see mem_cgroup_lruvec()). Its goal is to improve the scalability of global reclaim, which is critical to system-wide memory overcommit in data centers. Note that memcg reclaim is currently out of scope. Its memory bloat is a pointer to each lruvec and negligible to each pglist_data. In terms of traversing memcgs during global reclaim, it improves the best-case complexity from O(n) to O(1) and does not affect the worst-case complexity O(n). Therefore, on average, it has a sublinear complexity in contrast to the current linear complexity. The basic structure of an memcg LRU can be understood by an analogy to the active/inactive LRU (of folios): 1. It has the young and the old (generations), i.e., the counterparts to the active and the inactive; 2. The increment of max_seq triggers promotion, i.e., the counterpart to activation; 3. Other events trigger similar operations, e.g., offlining an memcg triggers demotion, i.e., the counterpart to deactivation. In terms of global reclaim, it has two distinct features: 1. Sharding, which allows each thread to start at a random memcg (in the old generation) and improves parallelism; 2. Eventual fairness, which allows direct reclaim to bail out at will and reduces latency without affecting fairness over some time. The commit message in patch 6 details the workflow: https://lore.kernel.org/r/20221222041905.2431096-7-yuzhao@google.com/ The following is a simple test to quickly verify its effectiveness. Test design: 1. Create multiple memcgs. 2. Each memcg contains a job (fio). 3. All jobs access the same amount of memory randomly. 4. The system does not experience global memory pressure. 5. Periodically write to the root memory.reclaim. Desired outcome: 1. All memcgs have similar pgsteal counts, i.e., stddev(pgsteal) over mean(pgsteal) is close to 0%. 2. The total pgsteal is close to the total requested through memory.reclaim, i.e., sum(pgsteal) over sum(requested) is close to 100%. Actual outcome [1]: MGLRU off MGLRU on stddev(pgsteal) / mean(pgsteal) 75% 20% sum(pgsteal) / sum(requested) 425% 95% #################################################################### MEMCGS=128 for ((memcg = 0; memcg < $MEMCGS; memcg++)); do mkdir /sys/fs/cgroup/memcg$memcg done start() { echo $BASHPID > /sys/fs/cgroup/memcg$memcg/cgroup.procs fio -name=memcg$memcg --numjobs=1 --ioengine=mmap \ --filename=/dev/zero --size=1920M --rw=randrw \ --rate=64m,64m --random_distribution=random \ --fadvise_hint=0 --time_based --runtime=10h \ --group_reporting --minimal } for ((memcg = 0; memcg < $MEMCGS; memcg++)); do start & done sleep 600 for ((i = 0; i < 600; i++)); do echo 256m >/sys/fs/cgroup/memory.reclaim sleep 6 done for ((memcg = 0; memcg < $MEMCGS; memcg++)); do grep "pgsteal " /sys/fs/cgroup/memcg$memcg/memory.stat done #################################################################### [1]: This was obtained from running the above script (touches less than 256GB memory) on an EPYC 7B13 with 512GB DRAM for over an hour. This patch (of 8): The new name lru_gen_folio will be more distinct from the coming lru_gen_memcg. Link: https://lkml.kernel.org/r/20221222041905.2431096-1-yuzhao@google.com Link: https://lkml.kernel.org/r/20221222041905.2431096-2-yuzhao@google.com Signed-off-by: Yu Zhao <yuzhao@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michael Larabel <Michael@MichaelLarabel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-12folio-compat: remove lru_cache_add()Vishal Moola (Oracle)1-1/+4
There are no longer any callers of lru_cache_add(), so remove it. This saves 79 bytes of kernel text. Also cleanup some comments such that they reference the new folio_add_lru() instead. Link: https://lkml.kernel.org/r/20221101175326.13265-6-vishal.moola@gmail.com Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-09mm: vmscan: make rotations a secondary factor in balancing anon vs fileJohannes Weiner1-1/+1
We noticed a 2% webserver throughput regression after upgrading from 5.6. This could be tracked down to a shift in the anon/file reclaim balance (confirmed with swappiness) that resulted in worse reclaim efficiency and thus more kswapd activity for the same outcome. The change that exposed the problem is aae466b0052e ("mm/swap: implement workingset detection for anonymous LRU"). By qualifying swapins based on their refault distance, it lowered the cost of anon reclaim in this workload, in turn causing (much) more anon scanning than before. Scanning the anon list is more expensive due to the higher ratio of mmapped pages that may rotate during reclaim, and so the result was an increase in %sys time. Right now, rotations aren't considered a cost when balancing scan pressure between LRUs. We can end up with very few file refaults putting all the scan pressure on hot anon pages that are rotated en masse, don't get reclaimed, and never push back on the file LRU again. We still only reclaim file cache in that case, but we burn a lot CPU rotating anon pages. It's "fair" from an LRU age POV, but doesn't reflect the real cost it imposes on the system. Consider rotations as a secondary factor in balancing the LRUs. This doesn't attempt to make a precise comparison between IO cost and CPU cost, it just says: if reloads are about comparable between the lists, or rotations are overwhelmingly different, adjust for CPU work. This fixed the regression on our webservers. It has since been deployed to the entire Meta fleet and hasn't caused any problems. Link: https://lkml.kernel.org/r/20221013193113.726425-1-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-27mm: multi-gen LRU: minimal implementationYu Zhao1-2/+108
To avoid confusion, the terms "promotion" and "demotion" will be applied to the multi-gen LRU, as a new convention; the terms "activation" and "deactivation" will be applied to the active/inactive LRU, as usual. The aging produces young generations. Given an lruvec, it increments max_seq when max_seq-min_seq+1 approaches MIN_NR_GENS. The aging promotes hot pages to the youngest generation when it finds them accessed through page tables; the demotion of cold pages happens consequently when it increments max_seq. Promotion in the aging path does not involve any LRU list operations, only the updates of the gen counter and lrugen->nr_pages[]; demotion, unless as the result of the increment of max_seq, requires LRU list operations, e.g., lru_deactivate_fn(). The aging has the complexity O(nr_hot_pages), since it is only interested in hot pages. The eviction consumes old generations. Given an lruvec, it increments min_seq when lrugen->lists[] indexed by min_seq%MAX_NR_GENS becomes empty. A feedback loop modeled after the PID controller monitors refaults over anon and file types and decides which type to evict when both types are available from the same generation. The protection of pages accessed multiple times through file descriptors takes place in the eviction path. Each generation is divided into multiple tiers. A page accessed N times through file descriptors is in tier order_base_2(N). Tiers do not have dedicated lrugen->lists[], only bits in folio->flags. The aforementioned feedback loop also monitors refaults over all tiers and decides when to protect pages in which tiers (N>1), using the first tier (N=0,1) as a baseline. The first tier contains single-use unmapped clean pages, which are most likely the best choices. In contrast to promotion in the aging path, the protection of a page in the eviction path is achieved by moving this page to the next generation, i.e., min_seq+1, if the feedback loop decides so. This approach has the following advantages: 1. It removes the cost of activation in the buffered access path by inferring whether pages accessed multiple times through file descriptors are statistically hot and thus worth protecting in the eviction path. 2. It takes pages accessed through page tables into account and avoids overprotecting pages accessed multiple times through file descriptors. (Pages accessed through page tables are in the first tier, since N=0.) 3. More tiers provide better protection for pages accessed more than twice through file descriptors, when under heavy buffered I/O workloads. Server benchmark results: Single workload: fio (buffered I/O): +[30, 32]% IOPS BW 5.19-rc1: 2673k 10.2GiB/s patch1-6: 3491k 13.3GiB/s Single workload: memcached (anon): -[4, 6]% Ops/sec KB/sec 5.19-rc1: 1161501.04 45177.25 patch1-6: 1106168.46 43025.04 Configurations: CPU: two Xeon 6154 Mem: total 256G Node 1 was only used as a ram disk to reduce the variance in the results. patch drivers/block/brd.c <<EOF 99,100c99,100 < gfp_flags = GFP_NOIO | __GFP_ZERO | __GFP_HIGHMEM; < page = alloc_page(gfp_flags); --- > gfp_flags = GFP_NOIO | __GFP_ZERO | __GFP_HIGHMEM | __GFP_THISNODE; > page = alloc_pages_node(1, gfp_flags, 0); EOF cat >>/etc/systemd/system.conf <<EOF CPUAffinity=numa NUMAPolicy=bind NUMAMask=0 EOF cat >>/etc/memcached.conf <<EOF -m 184320 -s /var/run/memcached/memcached.sock -a 0766 -t 36 -B binary EOF cat fio.sh modprobe brd rd_nr=1 rd_size=113246208 swapoff -a mkfs.ext4 /dev/ram0 mount -t ext4 /dev/ram0 /mnt mkdir /sys/fs/cgroup/user.slice/test echo 38654705664 >/sys/fs/cgroup/user.slice/test/memory.max echo $$ >/sys/fs/cgroup/user.slice/test/cgroup.procs fio -name=mglru --numjobs=72 --directory=/mnt --size=1408m \ --buffered=1 --ioengine=io_uring --iodepth=128 \ --iodepth_batch_submit=32 --iodepth_batch_complete=32 \ --rw=randread --random_distribution=random --norandommap \ --time_based --ramp_time=10m --runtime=5m --group_reporting cat memcached.sh modprobe brd rd_nr=1 rd_size=113246208 swapoff -a mkswap /dev/ram0 swapon /dev/ram0 memtier_benchmark -S /var/run/memcached/memcached.sock \ -P memcache_binary -n allkeys --key-minimum=1 \ --key-maximum=65000000 --key-pattern=P:P -c 1 -t 36 \ --ratio 1:0 --pipeline 8 -d 2000 memtier_benchmark -S /var/run/memcached/memcached.sock \ -P memcache_binary -n allkeys --key-minimum=1 \ --key-maximum=65000000 --key-pattern=R:R -c 1 -t 36 \ --ratio 0:1 --pipeline 8 --randomize --distinct-client-seed Client benchmark results: kswapd profiles: 5.19-rc1 40.33% page_vma_mapped_walk (overhead) 21.80% lzo1x_1_do_compress (real work) 7.53% do_raw_spin_lock 3.95% _raw_spin_unlock_irq 2.52% vma_interval_tree_iter_next 2.37% folio_referenced_one 2.28% vma_interval_tree_subtree_search 1.97% anon_vma_interval_tree_iter_first 1.60% ptep_clear_flush 1.06% __zram_bvec_write patch1-6 39.03% lzo1x_1_do_compress (real work) 18.47% page_vma_mapped_walk (overhead) 6.74% _raw_spin_unlock_irq 3.97% do_raw_spin_lock 2.49% ptep_clear_flush 2.48% anon_vma_interval_tree_iter_first 1.92% folio_referenced_one 1.88% __zram_bvec_write 1.48% memmove 1.31% vma_interval_tree_iter_next Configurations: CPU: single Snapdragon 7c Mem: total 4G ChromeOS MemoryPressure [1] [1] https://chromium.googlesource.com/chromiumos/platform/tast-tests/ Link: https://lkml.kernel.org/r/20220918080010.2920238-7-yuzhao@google.com Signed-off-by: Yu Zhao <yuzhao@google.com> Acked-by: Brian Geffon <bgeffon@google.com> Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name> Acked-by: Steven Barrett <steven@liquorix.net> Acked-by: Suleiman Souhlal <suleiman@google.com> Tested-by: Daniel Byrne <djbyrne@mtu.edu> Tested-by: Donald Carr <d@chaos-reins.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru> Tested-by: Shuang Zhai <szhai2@cs.rochester.edu> Tested-by: Sofia Trinh <sofia.trinh@edi.works> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Barry Song <baohua@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michael Larabel <Michael@MichaelLarabel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-04mm: shrinkers: provide shrinkers with namesRoman Gushchin1-1/+1
Currently shrinkers are anonymous objects. For debugging purposes they can be identified by count/scan function names, but it's not always useful: e.g. for superblock's shrinkers it's nice to have at least an idea of to which superblock the shrinker belongs. This commit adds names to shrinkers. register_shrinker() and prealloc_shrinker() functions are extended to take a format and arguments to master a name. In some cases it's not possible to determine a good name at the time when a shrinker is allocated. For such cases shrinker_debugfs_rename() is provided. The expected format is: <subsystem>-<shrinker_type>[:<instance>]-<id> For some shrinkers an instance can be encoded as (MAJOR:MINOR) pair. After this change the shrinker debugfs directory looks like: $ cd /sys/kernel/debug/shrinker/ $ ls dquota-cache-16 sb-devpts-28 sb-proc-47 sb-tmpfs-42 mm-shadow-18 sb-devtmpfs-5 sb-proc-48 sb-tmpfs-43 mm-zspool:zram0-34 sb-hugetlbfs-17 sb-pstore-31 sb-tmpfs-44 rcu-kfree-0 sb-hugetlbfs-33 sb-rootfs-2 sb-tmpfs-49 sb-aio-20 sb-iomem-12 sb-securityfs-6 sb-tracefs-13 sb-anon_inodefs-15 sb-mqueue-21 sb-selinuxfs-22 sb-xfs:vda1-36 sb-bdev-3 sb-nsfs-4 sb-sockfs-8 sb-zsmalloc-19 sb-bpf-32 sb-pipefs-14 sb-sysfs-26 thp-deferred_split-10 sb-btrfs:vda2-24 sb-proc-25 sb-tmpfs-1 thp-zero-9 sb-cgroup2-30 sb-proc-39 sb-tmpfs-27 xfs-buf:vda1-37 sb-configfs-23 sb-proc-41 sb-tmpfs-29 xfs-inodegc:vda1-38 sb-dax-11 sb-proc-45 sb-tmpfs-35 sb-debugfs-7 sb-proc-46 sb-tmpfs-40 [roman.gushchin@linux.dev: fix build warnings] Link: https://lkml.kernel.org/r/Yr+ZTnLb9lJk6fJO@castle Reported-by: kernel test robot <lkp@intel.com> Link: https://lkml.kernel.org/r/20220601032227.4076670-4-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Dave Chinner <dchinner@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-22memcg: sync flush only if periodic flush is delayedShakeel Butt1-1/+1
Daniel Dao has reported [1] a regression on workloads that may trigger a lot of refaults (anon and file). The underlying issue is that flushing rstat is expensive. Although rstat flush are batched with (nr_cpus * MEMCG_BATCH) stat updates, it seems like there are workloads which genuinely do stat updates larger than batch value within short amount of time. Since the rstat flush can happen in the performance critical codepaths like page faults, such workload can suffer greatly. This patch fixes this regression by making the rstat flushing conditional in the performance critical codepaths. More specifically, the kernel relies on the async periodic rstat flusher to flush the stats and only if the periodic flusher is delayed by more than twice the amount of its normal time window then the kernel allows rstat flushing from the performance critical codepaths. Now the question: what are the side-effects of this change? The worst that can happen is the refault codepath will see 4sec old lruvec stats and may cause false (or missed) activations of the refaulted page which may under-or-overestimate the workingset size. Though that is not very concerning as the kernel can already miss or do false activations. There are two more codepaths whose flushing behavior is not changed by this patch and we may need to come to them in future. One is the writeback stats used by dirty throttling and second is the deactivation heuristic in the reclaim. For now keeping an eye on them and if there is report of regression due to these codepaths, we will reevaluate then. Link: https://lore.kernel.org/all/CA+wXwBSyO87ZX5PVwdHm-=dBjZYECGmfnydUicUyrQqndgX2MQ@mail.gmail.com [1] Link: https://lkml.kernel.org/r/20220304184040.1304781-1-shakeelb@google.com Fixes: 1f828223b799 ("memcg: flush lruvec stats in the refault") Signed-off-by: Shakeel Butt <shakeelb@google.com> Reported-by: Daniel Dao <dqminh@cloudflare.com> Tested-by: Ivan Babrou <ivan@cloudflare.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Frank Hofmann <fhofmann@cloudflare.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23Merge tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecacheLinus Torvalds1-12/+13
Pull folio updates from Matthew Wilcox: - Rewrite how munlock works to massively reduce the contention on i_mmap_rwsem (Hugh Dickins): https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/ - Sort out the page refcount mess for ZONE_DEVICE pages (Christoph Hellwig): https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/ - Convert GUP to use folios and make pincount available for order-1 pages. (Matthew Wilcox) - Convert a few more truncation functions to use folios (Matthew Wilcox) - Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew Wilcox) - Convert rmap_walk to use folios (Matthew Wilcox) - Convert most of shrink_page_list() to use a folio (Matthew Wilcox) - Add support for creating large folios in readahead (Matthew Wilcox) * tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits) mm/damon: minor cleanup for damon_pa_young selftests/vm/transhuge-stress: Support file-backed PMD folios mm/filemap: Support VM_HUGEPAGE for file mappings mm/readahead: Switch to page_cache_ra_order mm/readahead: Align file mappings for non-DAX mm/readahead: Add large folio readahead mm: Support arbitrary THP sizes mm: Make large folios depend on THP mm: Fix READ_ONLY_THP warning mm/filemap: Allow large folios to be added to the page cache mm: Turn can_split_huge_page() into can_split_folio() mm/vmscan: Convert pageout() to take a folio mm/vmscan: Turn page_check_references() into folio_check_references() mm/vmscan: Account large folios correctly mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios mm/vmscan: Free non-shmem folios without splitting them mm/rmap: Constify the rmap_walk_control argument mm/rmap: Convert rmap_walk() to take a folio mm: Turn page_anon_vma() into folio_anon_vma() mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read() ...
2022-03-23mm: workingset: replace IRQ-off check with a lockdep assert.Sebastian Andrzej Siewior1-1/+4
Commit 68d48e6a2df57 ("mm: workingset: add vmstat counter for shadow nodes") introduced an IRQ-off check to ensure that a lock is held which also disabled interrupts. This does not work the same way on PREEMPT_RT because none of the locks, that are held, disable interrupts. Replace this check with a lockdep assert which ensures that the lock is held. Link: https://lkml.kernel.org/r/20220301122143.1521823-3-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Cc: Zefan Li <lizefan.x@bytedance.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23xarray: use kmem_cache_alloc_lru to allocate xa_nodeMuchun Song1-1/+1
The workingset will add the xa_node to the shadow_nodes list. So the allocation of xa_node should be done by kmem_cache_alloc_lru(). Using xas_set_lru() to pass the list_lru which we want to insert xa_node into to set up the xa_node reclaim context correctly. Link: https://lkml.kernel.org/r/20220228122126.37293-9-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Alex Shi <alexs@kernel.org> Cc: Anna Schumaker <Anna.Schumaker@Netapp.com> Cc: Chao Yu <chao@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Kari Argillander <kari.argillander@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-21mm/workingset: Convert workingset_eviction() to take a folioMatthew Wilcox (Oracle)1-12/+13
This removes an assumption that THPs are the only kind of compound pages and removes a few hidden calls to compound_head(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-11-09Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-0/+10
Merge more updates from Andrew Morton: "87 patches. Subsystems affected by this patch series: mm (pagecache and hugetlb), procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs, init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork, sysvfs, kcov, gdb, resource, selftests, and ipc" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits) ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL ipc: check checkpoint_restore_ns_capable() to modify C/R proc files selftests/kselftest/runner/run_one(): allow running non-executable files virtio-mem: disallow mapping virtio-mem memory via /dev/mem kernel/resource: disallow access to exclusive system RAM regions kernel/resource: clean up and optimize iomem_is_exclusive() scripts/gdb: handle split debug for vmlinux kcov: replace local_irq_save() with a local_lock_t kcov: avoid enable+disable interrupts if !in_task() kcov: allocate per-CPU memory on the relevant node Documentation/kcov: define `ip' in the example Documentation/kcov: include types.h in the example sysv: use BUILD_BUG_ON instead of runtime check kernel/fork.c: unshare(): use swap() to make code cleaner seq_file: fix passing wrong private data seq_file: move seq_escape() to a header signal: remove duplicate include in signal.h crash_dump: remove duplicate include in crash_dump.h crash_dump: fix boolreturn.cocci warning hfs/hfsplus: use WARN_ON for sanity check ...
2021-11-09vfs: keep inodes with page cache off the inode shrinker LRUJohannes Weiner1-0/+10
Historically (pre-2.5), the inode shrinker used to reclaim only empty inodes and skip over those that still contained page cache. This caused problems on highmem hosts: struct inode could put fill lowmem zones before the cache was getting reclaimed in the highmem zones. To address this, the inode shrinker started to strip page cache to facilitate reclaiming lowmem. However, this comes with its own set of problems: the shrinkers may drop actively used page cache just because the inodes are not currently open or dirty - think working with a large git tree. It further doesn't respect cgroup memory protection settings and can cause priority inversions between containers. Nowadays, the page cache also holds non-resident info for evicted cache pages in order to detect refaults. We've come to rely heavily on this data inside reclaim for protecting the cache workingset and driving swap behavior. We also use it to quantify and report workload health through psi. The latter in turn is used for fleet health monitoring, as well as driving automated memory sizing of workloads and containers, proactive reclaim and memory offloading schemes. The consequences of dropping page cache prematurely is that we're seeing subtle and not-so-subtle failures in all of the above-mentioned scenarios, with the workload generally entering unexpected thrashing states while losing the ability to reliably detect it. To fix this on non-highmem systems at least, going back to rotating inodes on the LRU isn't feasible. We've tried (commit a76cf1a474d7 ("mm: don't reclaim inodes with many attached pages")) and failed (commit 69056ee6a8a3 ("Revert "mm: don't reclaim inodes with many attached pages"")). The issue is mostly that shrinker pools attract pressure based on their size, and when objects get skipped the shrinkers remember this as deferred reclaim work. This accumulates excessive pressure on the remaining inodes, and we can quickly eat into heavily used ones, or dirty ones that require IO to reclaim, when there potentially is plenty of cold, clean cache around still. Instead, this patch keeps populated inodes off the inode LRU in the first place - just like an open file or dirty state would. An otherwise clean and unused inode then gets queued when the last cache entry disappears. This solves the problem without reintroducing the reclaim issues, and generally is a bit more scalable than having to wade through potentially hundreds of thousands of busy inodes. Locking is a bit tricky because the locks protecting the inode state (i_lock) and the inode LRU (lru_list.lock) don't nest inside the irq-safe page cache lock (i_pages.xa_lock). Page cache deletions are serialized through i_lock, taken before the i_pages lock, to make sure depopulated inodes are queued reliably. Additions may race with deletions, but we'll check again in the shrinker. If additions race with the shrinker itself, we're protected by the i_lock: if find_inode() or iput() win, the shrinker will bail on the elevated i_count or I_REFERENCED; if the shrinker wins and goes ahead with the inode, it will set I_FREEING and inhibit further igets(), which will cause the other side to create a new instance of the inode instead. Link: https://lkml.kernel.org/r/20210614211904.14420-4-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Roman Gushchin <guro@fb.com> Cc: Tejun Heo <tj@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-10-18mm/workingset: Convert workingset_refault() to take a folioMatthew Wilcox (Oracle)1-20/+22
This nets us 178 bytes of savings from removing calls to compound_head. The three callers all grow a little, but each of them will be converted to use folios soon, so that's fine. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz>
2021-09-27mm/workingset: Convert workingset_activation to take a folioMatthew Wilcox (Oracle)1-7/+4
This function already assumed it was being passed a head page. No real change here, except that thp_nr_pages() compiles away on kernels with THP compiled out while folio_nr_pages() is always present. Also convert page_memcg_rcu() to folio_memcg_rcu(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz>
2021-09-27mm/memcg: Add folio_lruvec()Matthew Wilcox (Oracle)1-1/+2
This replaces mem_cgroup_page_lruvec(). All callers converted. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz>
2021-09-23memcg: flush lruvec stats in the refaultShakeel Butt1-0/+1
Prior to the commit 7e1c0d6f5820 ("memcg: switch lruvec stats to rstat") and the commit aa48e47e3906 ("memcg: infrastructure to flush memcg stats"), each lruvec memcg stats can be off by (nr_cgroups * nr_cpus * 32) at worst and for unbounded amount of time. The commit aa48e47e3906 moved the lruvec stats to rstat infrastructure and the commit 7e1c0d6f5820 bounded the error for all the lruvec stats to (nr_cpus * 32) at worst for at most 2 seconds. More specifically it decoupled the number of stats and the number of cgroups from the error rate. However this reduction in error comes with the cost of triggering the slowpath of stats update more frequently. Previously in the slowpath the kernel adds the stats up the memcg tree. After aa48e47e3906, the kernel triggers the asyn lruvec stats flush through queue_work(). This causes regression reports from 0day kernel bot [1] as well as from phoronix test suite [2]. We tried two options to fix the regression: 1) Increase the threshold to trigger the slowpath in lruvec stats update codepath from 32 to 512. 2) Remove the slowpath from lruvec stats update codepath and instead flush the stats in the page refault codepath. The assumption is that the kernel timely flush the stats, so, the update tree would be small in the refault codepath to not cause the preformance impact. Following are the results of will-it-scale/page_fault[1|2|3] benchmark on four settings i.e. (1) 5.15-rc1 as baseline (2) 5.15-rc1 with aa48e47e3906 and 7e1c0d6f5820 reverted (3) 5.15-rc1 with option-1 (4) 5.15-rc1 with option-2. test (1) (2) (3) (4) pg_f1 368563 406277 (10.23%) 399693 (8.44%) 416398 (12.97%) pg_f2 338399 372133 (9.96%) 369180 (9.09%) 381024 (12.59%) pg_f3 500853 575399 (14.88%) 570388 (13.88%) 576083 (15.02%) From the above result, it seems like the option-2 not only solves the regression but also improves the performance for at least these benchmarks. Feng Tang (intel) ran the aim7 benchmark with these two options and confirms that option-1 reduces the regression but option-2 removes the regression. Michael Larabel (phoronix) ran multiple benchmarks with these options and reported the results at [3] and it shows for most benchmarks option-2 removes the regression introduced by the commit aa48e47e3906 ("memcg: infrastructure to flush memcg stats"). Based on the experiment results, this patch proposed the option-2 as the solution to resolve the regression. Link: https://lore.kernel.org/all/20210726022421.GB21872@xsang-OptiPlex-9020 [1] Link: https://www.phoronix.com/scan.php?page=article&item=linux515-compile-regress [2] Link: https://openbenchmarking.org/result/2109226-DEBU-LINUX5104 [3] Fixes: aa48e47e3906 ("memcg: infrastructure to flush memcg stats") Signed-off-by: Shakeel Butt <shakeelb@google.com> Tested-by: Michael Larabel <Michael@phoronix.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Roman Gushchin <guro@fb.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Hillf Danton <hdanton@sina.com>, Cc: Michal Koutný <mkoutny@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org>, Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08mm/workingset: correct kernel-doc notationsRandy Dunlap1-1/+1
Use the documented kernel-doc format to prevent kernel-doc warnings. mm/workingset.c:256: warning: No description found for return value of 'workingset_eviction' mm/workingset.c:285: warning: Function parameter or member 'folio' not described in 'workingset_refault' mm/workingset.c:285: warning: Excess function parameter 'page' description in 'workingset_refault' Link: https://lkml.kernel.org/r/20210808203153.10678-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01mm: workingset: define macro WORKINGSET_SHIFTMiaohe Lin1-4/+6
The magic number 1 is used in several places in workingset.c. Define a macro WORKINGSET_SHIFT for it to improve code readability. Link: https://lkml.kernel.org/r/20210624122307.1759342-1-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29mm: memcontrol: remove the pgdata parameter of mem_cgroup_page_lruvecMuchun Song1-1/+1
All the callers of mem_cgroup_page_lruvec() just pass page_pgdat(page) as the 2nd parameter to it (except isolate_migratepages_block()). But for isolate_migratepages_block(), the page_pgdat(page) is also equal to the local variable of @pgdat. So mem_cgroup_page_lruvec() do not need the pgdat parameter. Just remove it to simplify the code. Link: https://lkml.kernel.org/r/20210417043538.9793-4-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05mm: stop accounting shadow entriesMatthew Wilcox (Oracle)1-1/+0
We no longer need to keep track of how many shadow entries are present in a mapping. This saves a few writes to the inode and memory barriers. Link: https://lkml.kernel.org/r/20201026151849.24232-3-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: Vishal Verma <vishal.l.verma@intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-25mm: workingset: clarify eviction order and distance calculationOscar Salvador1-1/+1
The premise of the refault distance is that it can be seen as a deficit of the inactive list space, so that if the inactive list would have had (R - E) more slots, the page would not have been evicted but promoted to the active list instead. However, the way the code is ordered right now set us to be off by one, so the real number of slots would be (R - E) + 1. I stumbled upon this when trying to understand the code and it puzzled me that the comments did not match what the code did. This it not an issue at all since evictions and refaults tend to happen in a number large enough that being off-by-one does not have any impact - and since the compiler and CPUs are free to rearrange the execution sequence anyway. But as Johannes says, it is better to re-arrange the code in the proper order since otherwise would be misleading to somebody who is actively reading and trying to understand the logic of the code - like it happened to me. Link: https://lkml.kernel.org/r/20210201060651.3781-1-osalvador@suse.de Signed-off-by: Oscar Salvador <osalvador@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-25mm/workingset.c: avoid unnecessary max_nodes estimation in count_shadow_nodes()Miaohe Lin1-3/+2
If list_lru_shrink_count is 0, we always return SHRINK_EMPTY regardless of the value of max_nodes. So we can return early if nodes == 0 to save some cpu cycles of approximating a reasonable limit for the nodes. Link: https://lkml.kernel.org/r/20210123073825.46709-1-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-16Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-2/+0
Merge more updates from Andrew Morton: "More MM work: a memcg scalability improvememt" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/lru: revise the comments of lru_lock mm/lru: introduce relock_page_lruvec() mm/lru: replace pgdat lru_lock with lruvec lock mm/swap.c: serialize memcg changes in pagevec_lru_move_fn mm/compaction: do page isolation first in compaction mm/lru: introduce TestClearPageLRU() mm/mlock: remove __munlock_isolate_lru_page() mm/mlock: remove lru_lock on TestClearPageMlocked mm/vmscan: remove lruvec reget in move_pages_to_lru mm/lru: move lock into lru_note_cost mm/swap.c: fold vm event PGROTATED into pagevec_move_tail_fn mm/memcg: add debug checking in lock_page_memcg mm: page_idle_get_page() does not need lru_lock mm/rmap: stop store reordering issue on page->mapping mm/vmscan: remove unnecessary lruvec adding mm/thp: narrow lru locking mm/thp: simplify lru_add_page_tail() mm/thp: use head for head page in lru_add_page_tail() mm/thp: move lru_add_page_tail() to huge_memory.c
2020-12-16mm/lru: move lock into lru_note_costAlex Shi1-2/+0
We have to move lru_lock into lru_note_cost, since it cycle up on memcg tree, for future per lruvec lru_lock replace. It's a bit ugly and may cost a bit more locking, but benefit from multiple memcg locking could cover the lost. Link: https://lkml.kernel.org/r/1604566549-62481-11-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-16Merge tag 'net-next-5.11' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - support "prefer busy polling" NAPI operation mode, where we defer softirq for some time expecting applications to periodically busy poll - AF_XDP: improve efficiency by more batching and hindering the adjacency cache prefetcher - af_packet: make packet_fanout.arr size configurable up to 64K - tcp: optimize TCP zero copy receive in presence of partial or unaligned reads making zero copy a performance win for much smaller messages - XDP: add bulk APIs for returning / freeing frames - sched: support fragmenting IP packets as they come out of conntrack - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs BPF: - BPF switch from crude rlimit-based to memcg-based memory accounting - BPF type format information for kernel modules and related tracing enhancements - BPF implement task local storage for BPF LSM - allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage Protocols: - mptcp: improve multiple xmit streams support, memory accounting and many smaller improvements - TLS: support CHACHA20-POLY1305 cipher - seg6: add support for SRv6 End.DT4/DT6 behavior - sctp: Implement RFC 6951: UDP Encapsulation of SCTP - ppp_generic: add ability to bridge channels directly - bridge: Connectivity Fault Management (CFM) support as is defined in IEEE 802.1Q section 12.14. Drivers: - mlx5: make use of the new auxiliary bus to organize the driver internals - mlx5: more accurate port TX timestamping support - mlxsw: - improve the efficiency of offloaded next hop updates by using the new nexthop object API - support blackhole nexthops - support IEEE 802.1ad (Q-in-Q) bridging - rtw88: major bluetooth co-existance improvements - iwlwifi: support new 6 GHz frequency band - ath11k: Fast Initial Link Setup (FILS) - mt7915: dual band concurrent (DBDC) support - net: ipa: add basic support for IPA v4.5 Refactor: - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior - phy: add support for shared interrupts; get rid of multiple driver APIs and have the drivers write a full IRQ handler, slight growth of driver code should be compensated by the simpler API which also allows shared IRQs - add common code for handling netdev per-cpu counters - move TX packet re-allocation from Ethernet switch tag drivers to a central place - improve efficiency and rename nla_strlcpy - number of W=1 warning cleanups as we now catch those in a patchwork build bot Old code removal: - wan: delete the DLCI / SDLA drivers - wimax: move to staging - wifi: remove old WDS wifi bridging support" * tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits) net: hns3: fix expression that is currently always true net: fix proc_fs init handling in af_packet and tls nfc: pn533: convert comma to semicolon af_vsock: Assign the vsock transport considering the vsock address flags af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path vsock_addr: Check for supported flag values vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag vm_sockets: Add flags field in the vsock address data structure net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context nfc: s3fwrn5: Release the nfc firmware net: vxget: clean up sparse warnings mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3 mlxsw: spectrum_router_xm: Introduce basic XM cache flushing mlxsw: reg: Add Router LPM Cache Enable Register mlxsw: reg: Add Router LPM Cache ML Delete Register mlxsw: spectrum_router_xm: Implement L-value tracking for M-index mlxsw: reg: Add XM Router M Table Register ...
2020-12-15mm: memcg/slab: rename *_lruvec_slab_state to *_lruvec_kmem_stateMuchun Song1-4/+4
The *_lruvec_slab_state is also suitable for pages allocated from buddy, not just for the slab objects. But the function name seems to tell us that only slab object is applicable. So we can rename the keyword of slab to kmem. Link: https://lkml.kernel.org/r/20201117085249.24319-1-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Roman Gushchin <guro@fb.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-03mm: memcontrol: Use helpers to read page's memcg dataRoman Gushchin1-1/+1
Patch series "mm: allow mapping accounted kernel pages to userspace", v6. Currently a non-slab kernel page which has been charged to a memory cgroup can't be mapped to userspace. The underlying reason is simple: PageKmemcg flag is defined as a page type (like buddy, offline, etc), so it takes a bit from a page->mapped counter. Pages with a type set can't be mapped to userspace. But in general the kmemcg flag has nothing to do with mapping to userspace. It only means that the page has been accounted by the page allocator, so it has to be properly uncharged on release. Some bpf maps are mapping the vmalloc-based memory to userspace, and their memory can't be accounted because of this implementation detail. This patchset removes this limitation by moving the PageKmemcg flag into one of the free bits of the page->mem_cgroup pointer. Also it formalizes accesses to the page->mem_cgroup and page->obj_cgroups using new helpers, adds several checks and removes a couple of obsolete functions. As the result the code became more robust with fewer open-coded bit tricks. This patch (of 4): Currently there are many open-coded reads of the page->mem_cgroup pointer, as well as a couple of read helpers, which are barely used. It creates an obstacle on a way to reuse some bits of the pointer for storing additional bits of information. In fact, we already do this for slab pages, where the last bit indicates that a pointer has an attached vector of objcg pointers instead of a regular memcg pointer. This commits uses 2 existing helpers and introduces a new helper to converts all read sides to calls of these helpers: struct mem_cgroup *page_memcg(struct page *page); struct mem_cgroup *page_memcg_rcu(struct page *page); struct mem_cgroup *page_memcg_check(struct page *page); page_memcg_check() is intended to be used in cases when the page can be a slab page and have a memcg pointer pointing at objcg vector. It does check the lowest bit, and if set, returns NULL. page_memcg() contains a VM_BUG_ON_PAGE() check for the page not being a slab page. To make sure nobody uses a direct access, struct page's mem_cgroup/obj_cgroups is converted to unsigned long memcg_data. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Link: https://lkml.kernel.org/r/20201027001657.3398190-1-guro@fb.com Link: https://lkml.kernel.org/r/20201027001657.3398190-2-guro@fb.com Link: https://lore.kernel.org/bpf/20201201215900.3569844-2-guro@fb.com
2020-10-21Merge tag 'xarray-5.9' of git://git.infradead.org/users/willy/xarrayLinus Torvalds1-11/+2
Pull XArray updates from Matthew Wilcox: - Fix the test suite after introduction of the local_lock - Fix a bug in the IDA spotted by Coverity - Change the API that allows the workingset code to delete a node - Fix xas_reload() when dealing with entries that occupy multiple indices - Add a few more tests to the test suite - Fix an unsigned int being shifted into an unsigned long * tag 'xarray-5.9' of git://git.infradead.org/users/willy/xarray: XArray: Fix xas_create_range for ranges above 4 billion radix-tree: fix the comment of radix_tree_next_slot() XArray: Fix xas_reload for multi-index entries XArray: Add private interface for workingset node deletion XArray: Fix xas_for_each_conflict documentation XArray: Test marked multiorder iterations XArray: Test two more things about xa_cmpxchg ida: Free allocated bitmap in error path radix tree test suite: Fix compilation
2020-10-16mm/workingset.c: fix some doc warningsXiaofei Tan1-1/+1
Fix following warnings caused by mismatch bewteen function parameters and comments. mm/workingset.c:228: warning: Function parameter or member 'lruvec' not described in 'workingset_age_nonresident' mm/workingset.c:228: warning: Excess function parameter 'memcg' description in 'workingset_age_nonresident' Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/1600485913-11192-1-git-send-email-tanxiaofei@huawei.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13XArray: Add private interface for workingset node deletionMatthew Wilcox (Oracle)1-11/+2
Move the tricky bits of dealing with the XArray from the workingset code to the XArray. Make it clear in the documentation that this is a private interface, and only export it for the benefit of the test suite. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2020-08-15mm: replace hpage_nr_pages with thp_nr_pagesMatthew Wilcox (Oracle)1-3/+3
The thp prefix is more frequently used than hpage and we should be consistent between the various functions. [akpm@linux-foundation.org: fix mm/migrate.c] Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: http://lkml.kernel.org/r/20200629151959.15779-6-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12mm/swap: implement workingset detection for anonymous LRUJoonsoo Kim1-4/+11
This patch implements workingset detection for anonymous LRU. All the infrastructure is implemented by the previous patches so this patch just activates the workingset detection by installing/retrieving the shadow entry and adding refault calculation. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Link: http://lkml.kernel.org/r/1595490560-15117-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12mm/workingset: prepare the workingset detection infrastructure for anon LRUJoonsoo Kim1-3/+5
To prepare the workingset detection for anon LRU, this patch splits workingset event counters for refault, activate and restore into anon and file variants, as well as the refaults counter in struct lruvec. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Link: http://lkml.kernel.org/r/1595490560-15117-4-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07mm: memcg: convert vmstat slab counters to bytesRoman Gushchin1-2/+4
In order to prepare for per-object slab memory accounting, convert NR_SLAB_RECLAIMABLE and NR_SLAB_UNRECLAIMABLE vmstat items to bytes. To make it obvious, rename them to NR_SLAB_RECLAIMABLE_B and NR_SLAB_UNRECLAIMABLE_B (similar to NR_KERNEL_STACK_KB). Internally global and per-node counters are stored in pages, however memcg and lruvec counters are stored in bytes. This scheme may look weird, but only for now. As soon as slab pages will be shared between multiple cgroups, global and node counters will reflect the total number of slab pages. However memcg and lruvec counters will be used for per-memcg slab memory tracking, which will take separate kernel objects in the account. Keeping global and node counters in pages helps to avoid additional overhead. The size of slab memory shouldn't exceed 4Gb on 32-bit machines, so it will fit into atomic_long_t we use for vmstats. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/20200623174037.3951353-4-guro@fb.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-26mm: workingset: age nonresident information alongside anonymous pagesJohannes Weiner1-19/+27
Patch series "fix for "mm: balance LRU lists based on relative thrashing" patchset" This patchset fixes some problems of the patchset, "mm: balance LRU lists based on relative thrashing", which is now merged on the mainline. Patch "mm: workingset: let cache workingset challenge anon fix" is the result of discussion with Johannes. See following link. http://lkml.kernel.org/r/20200520232525.798933-6-hannes@cmpxchg.org And, the other two are minor things which are found when I try to rebase my patchset. This patch (of 3): After ("mm: workingset: let cache workingset challenge anon fix"), we compare refault distances to active_file + anon. But age of the non-resident information is only driven by the file LRU. As a result, we may overestimate the recency of any incoming refaults and activate them too eagerly, causing unnecessary LRU churn in certain situations. Make anon aging drive nonresident age as well to address that. Link: http://lkml.kernel.org/r/1592288204-27734-1-git-send-email-iamjoonsoo.kim@lge.com Link: http://lkml.kernel.org/r/1592288204-27734-2-git-send-email-iamjoonsoo.kim@lge.com Fixes: 34e58cac6d8f2a ("mm: workingset: let cache workingset challenge anon") Reported-by: Joonsoo Kim <js1304@gmail.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Rik van Riel <riel@surriel.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04mm: vmscan: reclaim writepage is IO costJohannes Weiner1-1/+1
The VM tries to balance reclaim pressure between anon and file so as to reduce the amount of IO incurred due to the memory shortage. It already counts refaults and swapins, but in addition it should also count writepage calls during reclaim. For swap, this is obvious: it's IO that wouldn't have occurred if the anonymous memory hadn't been under memory pressure. From a relative balancing point of view this makes sense as well: even if anon is cold and reclaimable, a cache that isn't thrashing may have equally cold pages that don't require IO to reclaim. For file writeback, it's trickier: some of the reclaim writepage IO would have likely occurred anyway due to dirty expiration. But not all of it - premature writeback reduces batching and generates additional writes. Since the flushers are already woken up by the time the VM starts writing cache pages one by one, let's assume that we'e likely causing writes that wouldn't have happened without memory pressure. In addition, the per-page cost of IO would have probably been much cheaper if written in larger batches from the flusher thread rather than the single-page-writes from kswapd. For our purposes - getting the trend right to accelerate convergence on a stable state that doesn't require paging at all - this is sufficiently accurate. If we later wanted to optimize for sustained thrashing, we can still refine the measurements. Count all writepage calls from kswapd as IO cost toward the LRU that the page belongs to. Why do this dynamically? Don't we know in advance that anon pages require IO to reclaim, and so could build in a static bias? First, scanning is not the same as reclaiming. If all the anon pages are referenced, we may not swap for a while just because we're scanning the anon list. During this time, however, it's important that we age anonymous memory and the page cache at the same rate so that their hot-cold gradients are comparable. Everything else being equal, we still want to reclaim the coldest memory overall. Second, we keep copies in swap unless the page changes. If there is swap-backed data that's mostly read (tmpfs file) and has been swapped out before, we can reclaim it without incurring additional IO. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Link: http://lkml.kernel.org/r/20200520232525.798933-14-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04mm: balance LRU lists based on relative thrashingJohannes Weiner1-0/+4
Since the LRUs were split into anon and file lists, the VM has been balancing between page cache and anonymous pages based on per-list ratios of scanned vs. rotated pages. In most cases that tips page reclaim towards the list that is easier to reclaim and has the fewest actively used pages, but there are a few problems with it: 1. Refaults and LRU rotations are weighted the same way, even though one costs IO and the other costs a bit of CPU. 2. The less we scan an LRU list based on already observed rotations, the more we increase the sampling interval for new references, and rotations become even more likely on that list. This can enter a death spiral in which we stop looking at one list completely until the other one is all but annihilated by page reclaim. Since commit a528910e12ec ("mm: thrash detection-based file cache sizing") we have refault detection for the page cache. Along with swapin events, they are good indicators of when the file or anon list, respectively, is too small for its workingset and needs to grow. For example, if the page cache is thrashing, the cache pages need more time in memory, while there may be colder pages on the anonymous list. Likewise, if swapped pages are faulting back in, it indicates that we reclaim anonymous pages too aggressively and should back off. Replace LRU rotations with refaults and swapins as the basis for relative reclaim cost of the two LRUs. This will have the VM target list balances that incur the least amount of IO on aggregate. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Link: http://lkml.kernel.org/r/20200520232525.798933-12-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04mm: workingset: let cache workingset challenge anonJohannes Weiner1-5/+12
We activate cache refaults with reuse distances in pages smaller than the size of the total cache. This allows new pages with competitive access frequencies to establish themselves, as well as challenge and potentially displace pages on the active list that have gone cold. However, that assumes that active cache can only replace other active cache in a competition for the hottest memory. This is not a great default assumption. The page cache might be thrashing while there are enough completely cold and unused anonymous pages sitting around that we'd only have to write to swap once to stop all IO from the cache. Activate cache refaults when their reuse distance in pages is smaller than the total userspace workingset, including anonymous pages. Reclaim can still decide how to balance pressure among the two LRUs depending on the IO situation. Rotational drives will prefer avoiding random IO from swap and go harder after cache. But fundamentally, hot cache should be able to compete with anon pages for a place in RAM. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Link: http://lkml.kernel.org/r/20200520232525.798933-6-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01mm: vmscan: detect file thrashing at the reclaim rootJohannes Weiner1-15/+52
We use refault information to determine whether the cache workingset is stable or transitioning, and dynamically adjust the inactive:active file LRU ratio so as to maximize protection from one-off cache during stable periods, and minimize IO during transitions. With cgroups and their nested LRU lists, we currently don't do this correctly. While recursive cgroup reclaim establishes a relative LRU order among the pages of all involved cgroups, refaults only affect the local LRU order in the cgroup in which they are occuring. As a result, cache transitions can take longer in a cgrouped system as the active pages of sibling cgroups aren't challenged when they should be. [ Right now, this is somewhat theoretical, because the siblings, under continued regular reclaim pressure, should eventually run out of inactive pages - and since inactive:active *size* balancing is also done on a cgroup-local level, we will challenge the active pages eventually in most cases. But the next patch will move that relative size enforcement to the reclaim root as well, and then this patch here will be necessary to propagate refault pressure to siblings. ] This patch moves refault detection to the root of reclaim. Instead of remembering the cgroup owner of an evicted page, remember the cgroup that caused the reclaim to happen. When refaults later occur, they'll correctly influence the cross-cgroup LRU order that reclaim follows. I.e. if global reclaim kicked out pages in some subgroup A/B/C, the refault of those pages will challenge the global LRU order, and not just the local order down inside C. [hannes@cmpxchg.org: use page_memcg() instead of another lookup] Link: http://lkml.kernel.org/r/20191115160722.GA309754@cmpxchg.org Link: http://lkml.kernel.org/r/20191107205334.158354-3-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Suren Baghdasaryan <surenb@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01mm: clean up and clarify lruvec lookup procedureJohannes Weiner1-4/+4
There is a per-memcg lruvec and a NUMA node lruvec. Which one is being used is somewhat confusing right now, and it's easy to make mistakes - especially when it comes to global reclaim. How it works: when memory cgroups are enabled, we always use the root_mem_cgroup's per-node lruvecs. When memory cgroups are not compiled in or disabled at runtime, we use pgdat->lruvec. Document that in a comment. Due to the way the reclaim code is generalized, all lookups use the mem_cgroup_lruvec() helper function, and nobody should have to find the right lruvec manually right now. But to avoid future mistakes, rename the pgdat->lruvec member to pgdat->__lruvec and delete the convenience wrapper that suggests it's a commonly accessed member. While in this area, swap the mem_cgroup_lruvec() argument order. The name suggests a memcg operation, yet it takes a pgdat first and a memcg second. I have to double take every time I call this. Fix that. Link: http://lkml.kernel.org/r/20191022144803.302233-3-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>