| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
"Small optimizations:
- fix off-by-one in the check whether memblock_add_range() should
reallocate memory to accommodate newly inserted range
- check only for relevant regions in memblock_merge_regions() rather
than swipe over the entire array"
* tag 'memblock-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: Avoid useless checks in memblock_merge_regions().
memblock: Make a boundary tighter in memblock_add_range().
|
|
If mprotect_fixup() successfully calls vma_merge() and replaces vma and
the next vma, then the tmp variable in the do_mprotect_pkey() is not
updated to point to the new vma end. This results in the loop detecting
a gap between VMAs that does not exist.
Fix the faulty value of tmp by setting it to the end location of the vma
iterator at the end of the loop.
Link: https://lkml.kernel.org/r/20230224212055.1786100-1-Liam.Howlett@oracle.com
Fixes: 2286a6914c77 ("mm: change mprotect_fixup to vma iterator")
Link: https://lore.kernel.org/linux-mm/20230223120407.729110a6ecd1416ac59d9cb0@linux-foundation.org/
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Bert Karwatzki <spasswolf@web.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217061
Tested-by: Bert Karwatzki <spasswolf@web.de>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/linux-mm/CAHk-=wjFmVL7NiuxL54qLkoabni_yD-oF9=dpDgETtdsiCbhUg@mail.gmail.com/
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl update from Luis Chamberlain:
"Just one fix which just came in.
Sadly the eager beavers willing to help with the sysctl moves have
slowed"
* tag 'sysctl-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
sysctl: fix proc_dobool() usability
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
"This time it's just a bunch of smaller cleanups and fixes for SLAB and
SLUB:
- Make it possible to use kmem_cache_alloc_bulk() early in boot when
interrupts are not yet enabled, as code doing that started to
appear via new maple tree users (Thomas Gleixner)
- Fix debugfs-related memory leak in SLUB (Greg Kroah-Hartman)
- Use the standard idiom to get head page of folio (SeongJae Park)
- Simplify and inline is_debug_pagealloc_cache() in SLAB (lvqian)
- Remove unused variable in SLAB (Gou Hao)"
* tag 'slab-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm, slab/slub: Ensure kmem_cache_alloc_bulk() is available early
mm/slub: fix memory leak with using debugfs_lookup()
mm/slab.c: cleanup is_debug_pagealloc_cache()
mm/sl{a,u}b: fix wrong usages of folio_page() for getting head pages
mm/slab: remove unused slab_early_init
|
|
Pull cifs client updates from Steve French:
"The largest subset of this is from David Howells et al: making the
cifs/smb3 driver pass iov_iters down to the lowest layers, directly to
the network transport rather than passing lists of pages around,
helping multiple areas:
- Pin user pages, thereby fixing the race between concurrent DIO read
and fork, where the pages containing the DIO read buffer may end up
belonging to the child process and not the parent - with the result
that the parent might not see the retrieved data.
- cifs shouldn't take refs on pages extracted from non-user-backed
iterators (eg. KVEC). With these changes, cifs will apply the
appropriate cleanup.
- Making it easier to transition to using folios in cifs rather than
pages by dealing with them through BVEC and XARRAY iterators.
- Allowing cifs to use the new splice function
The remainder are:
- fixes for stable, including various fixes for uninitialized memory,
wrong length field causing mount issue to very old servers,
important directory lease fixes and reconnect fixes
- cleanups (unused code removal, change one element array usage, and
a change form strtobool to kstrtobool, and Kconfig cleanups)
- SMBDIRECT (RDMA) fixes including iov_iter integration and UAF fixes
- reconnect fixes
- multichannel fixes, including improving channel allocation (to
least used channel)
- remove the last use of lock_page_killable by moving to
folio_lock_killable"
* tag '6.3-rc-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: (46 commits)
update internal module version number for cifs.ko
cifs: update ip_addr for ses only for primary chan setup
cifs: use tcon allocation functions even for dummy tcon
cifs: use the least loaded channel for sending requests
cifs: DIO to/from KVEC-type iterators should now work
cifs: Remove unused code
cifs: Build the RDMA SGE list directly from an iterator
cifs: Change the I/O paths to use an iterator rather than a page list
cifs: Add a function to read into an iter from a socket
cifs: Add some helper functions
cifs: Add a function to Hash the contents of an iterator
cifs: Add a function to build an RDMA SGE list from an iterator
netfs: Add a function to extract an iterator into a scatterlist
netfs: Add a function to extract a UBUF or IOVEC into a BVEC iterator
cifs: Implement splice_read to pass down ITER_BVEC not ITER_PIPE
splice: Export filemap/direct_splice_read()
iov_iter: Add a function to extract a page list from an iterator
iov_iter: Define flags to qualify page extraction.
splice: Add a func to do a splice from an O_DIRECT file without ITER_PIPE
splice: Add a func to do a splice from a buffered file without ITER_PIPE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
|
|
Currently proc_dobool expects a (bool *) in table->data, but sizeof(int)
in table->maxsize, because it uses do_proc_dointvec() directly.
This is unsafe for at least two reasons:
1. A sysctl table definition may use { .data = &variable, .maxsize =
sizeof(variable) }, not realizing that this makes the sysctl unusable
(see the Fixes: tag) and that they need to use the completely
counterintuitive sizeof(int) instead.
2. proc_dobool() will currently try to parse an array of values if given
.maxsize >= 2*sizeof(int), but will try to write values of type bool
by offsets of sizeof(int), so it will not work correctly with neither
an (int *) nor a (bool *). There is no .maxsize validation to prevent
this.
Fix this by:
1. Constraining proc_dobool() to allow only one value and .maxsize ==
sizeof(bool).
2. Wrapping the original struct ctl_table in a temporary one with .data
pointing to a local int variable and .maxsize set to sizeof(int) and
passing this one to proc_dointvec(), converting the value to/from
bool as needed (using proc_dou8vec_minmax() as an example).
3. Extending sysctl_check_table() to enforce proc_dobool() expectations.
4. Fixing the proc_dobool() docstring (it was just copy-pasted from
proc_douintvec, apparently...).
5. Converting all existing proc_dobool() users to set .maxsize to
sizeof(bool) instead of sizeof(int).
Fixes: 83efeeeb3d04 ("tty: Allow TIOCSTI to be disabled")
Fixes: a2071573d634 ("sysctl: introduce new proc handler proc_dobool")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Two fixes for SLAB and SLUB
- Make it possible to use kmem_cache_alloc_bulk() early in boot when
interrupts are not yet enabled, as code doing that start to appear via
the maple tree (by Thomas Gleixner).
- Fix debugfs-related memory leak (by Greg Kroah-Hartman).
|
|
A bunch of cleanups for SLAB and SLUB:
- Use the standard idiom to get head page of folio (by SeongJae Park)
- Simplify and inline is_debug_pagealloc_cache() in SLAB (by lvqian)
- Remove unused variable in SLAB (by Gou Hao)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Improve the scalability of the CFS bandwidth unthrottling logic with
large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with the
generic scheduler code. Add __cpuidle methods as noinstr to objtool's
noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS, to query
previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period, to
improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- Misc other cleanups, fixes
* tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
sched/rt: pick_next_rt_entity(): check list_entry
sched/deadline: Add more reschedule cases to prio_changed_dl()
sched/fair: sanitize vruntime of entity being placed
sched/fair: Remove capacity inversion detection
sched/fair: unlink misfit task from cpu overutilized
objtool: mem*() are not uaccess safe
cpuidle: Fix poll_idle() noinstr annotation
sched/clock: Make local_clock() noinstr
sched/clock/x86: Mark sched_clock() noinstr
x86/pvclock: Improve atomic update of last_value in pvclock_clocksource_read()
x86/atomics: Always inline arch_atomic64*()
cpuidle: tracing, preempt: Squash _rcuidle tracing
cpuidle: tracing: Warn about !rcu_is_watching()
cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG
cpuidle: drivers: firmware: psci: Dont instrument suspend code
KVM: selftests: Fix build of rseq test
exit: Detect and fix irq disabled state in oops
cpuidle, arm64: Fix the ARM64 cpuidle logic
cpuidle: mvebu: Fix duplicate flags assignment
sched/fair: Limit sched slice duration
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-02-17
We've added 64 non-merge commits during the last 7 day(s) which contain
a total of 158 files changed, 4190 insertions(+), 988 deletions(-).
The main changes are:
1) Add a rbtree data structure following the "next-gen data structure"
precedent set by recently-added linked-list, that is, by using
kfunc + kptr instead of adding a new BPF map type, from Dave Marchevsky.
2) Add a new benchmark for hashmap lookups to BPF selftests,
from Anton Protopopov.
3) Fix bpf_fib_lookup to only return valid neighbors and add an option
to skip the neigh table lookup, from Martin KaFai Lau.
4) Add cgroup.memory=nobpf kernel parameter option to disable BPF memory
accouting for container environments, from Yafang Shao.
5) Batch of ice multi-buffer and driver performance fixes,
from Alexander Lobakin.
6) Fix a bug in determining whether global subprog's argument is
PTR_TO_CTX, which is based on type names which breaks kprobe progs,
from Andrii Nakryiko.
7) Prep work for future -mcpu=v4 LLVM option which includes usage of
BPF_ST insn. Thus improve BPF_ST-related value tracking in verifier,
from Eduard Zingerman.
8) More prep work for later building selftests with Memory Sanitizer
in order to detect usages of undefined memory, from Ilya Leoshkevich.
9) Fix xsk sockets to check IFF_UP earlier to avoid a NULL pointer
dereference via sendmsg(), from Maciej Fijalkowski.
10) Implement BPF trampoline for RV64 JIT compiler, from Pu Lehui.
11) Fix BPF memory allocator in combination with BPF hashtab where it could
corrupt special fields e.g. used in bpf_spin_lock, from Hou Tao.
12) Fix LoongArch BPF JIT to always use 4 instructions for function
address so that instruction sequences don't change between passes,
from Hengqi Chen.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (64 commits)
selftests/bpf: Add bpf_fib_lookup test
bpf: Add BPF_FIB_LOOKUP_SKIP_NEIGH for bpf_fib_lookup
riscv, bpf: Add bpf trampoline support for RV64
riscv, bpf: Add bpf_arch_text_poke support for RV64
riscv, bpf: Factor out emit_call for kernel and bpf context
riscv: Extend patch_text for multiple instructions
Revert "bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES"
selftests/bpf: Add global subprog context passing tests
selftests/bpf: Convert test_global_funcs test to test_loader framework
bpf: Fix global subprog context argument resolution logic
LoongArch, bpf: Use 4 instructions for function address in JIT
bpf: bpf_fib_lookup should not return neigh in NUD_FAILED state
bpf: Disable bh in bpf_test_run for xdp and tc prog
xsk: check IFF_UP earlier in Tx path
Fix typos in selftest/bpf files
selftests/bpf: Use bpf_{btf,link,map,prog}_get_info_by_fd()
samples/bpf: Use bpf_{btf,link,map,prog}_get_info_by_fd()
bpftool: Use bpf_{btf,link,map,prog}_get_info_by_fd()
libbpf: Use bpf_{btf,link,map,prog}_get_info_by_fd()
libbpf: Introduce bpf_{btf,link,map,prog}_get_info_by_fd()
...
====================
Link: https://lore.kernel.org/r/20230217221737.31122-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Provide a function for filling in a scatterlist from the list of pages
contained in an iterator.
If the iterator is UBUF- or IOBUF-type, the pages have a pin taken on them
(as FOLL_PIN).
If the iterator is BVEC-, KVEC- or XARRAY-type, no pin is taken on the
pages and it is left to the caller to manage their lifetime. It cannot be
assumed that a ref can be validly taken, particularly in the case of a KVEC
iterator.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: linux-cachefs@redhat.com
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
filemap_splice_read() and direct_splice_read() should be exported.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Provide a function to do splice read from a buffered file, pulling the
folios out of the pagecache directly by calling filemap_get_pages() to do
any required reading and then pasting the returned folios into the pipe.
A helper function is provided to do the actual folio pasting and will
handle multipage folios by splicing as many of the relevant subpages as
will fit into the pipe.
The code is loosely based on filemap_read() and might belong in
mm/filemap.c with that as it needs to use filemap_get_pages().
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
filemap_get_pages() and a number of functions that it calls take an
iterator to provide two things: the number of bytes to be got from the file
specified and whether partially uptodate pages are allowed. Change these
functions so that this information is passed in directly. This allows it
to be called without having an iterator to hand.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
cc: Christoph Hellwig <hch@lst.de>
cc: Matthew Wilcox <willy@infradead.org>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Pull block updates from Jens Axboe:
- NVMe updates via Christoph:
- Small improvements to the logging functionality (Amit Engel)
- Authentication cleanups (Hannes Reinecke)
- Cleanup and optimize the DMA mapping cod in the PCIe driver
(Keith Busch)
- Work around the command effects for Format NVM (Keith Busch)
- Misc cleanups (Keith Busch, Christoph Hellwig)
- Fix and cleanup freeing single sgl (Keith Busch)
- MD updates via Song:
- Fix a rare crash during the takeover process
- Don't update recovery_cp when curr_resync is ACTIVE
- Free writes_pending in md_stop
- Change active_io to percpu
- Updates to drbd, inching us closer to unifying the out-of-tree driver
with the in-tree one (Andreas, Christoph, Lars, Robert)
- BFQ update adding support for multi-actuator drives (Paolo, Federico,
Davide)
- Make brd compliant with REQ_NOWAIT (me)
- Fix for IOPOLL and queue entering, fixing stalled IO waiting on
timeouts (me)
- Fix for REQ_NOWAIT with multiple bios (me)
- Fix memory leak in blktrace cleanup (Greg)
- Clean up sbitmap and fix a potential hang (Kemeng)
- Clean up some bits in BFQ, and fix a bug in the request injection
(Kemeng)
- Clean up the request allocation and issue code, and fix some bugs
related to that (Kemeng)
- ublk updates and fixes:
- Add support for unprivileged ublk (Ming)
- Improve device deletion handling (Ming)
- Misc (Liu, Ziyang)
- s390 dasd fixes (Alexander, Qiheng)
- Improve utility of request caching and fixes (Anuj, Xiao)
- zoned cleanups (Pankaj)
- More constification for kobjs (Thomas)
- blk-iocost cleanups (Yu)
- Remove bio splitting from drivers that don't need it (Christoph)
- Switch blk-cgroups to use struct gendisk. Some of this is now
incomplete as select late reverts were done. (Christoph)
- Add bvec initialization helpers, and convert callers to use that
rather than open-coding it (Christoph)
- Misc fixes and cleanups (Jinke, Keith, Arnd, Bart, Li, Martin,
Matthew, Ulf, Zhong)
* tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux: (169 commits)
brd: use radix_tree_maybe_preload instead of radix_tree_preload
block: use proper return value from bio_failfast()
block: bio-integrity: Copy flags when bio_integrity_payload is cloned
block: Fix io statistics for cgroup in throttle path
brd: mark as nowait compatible
brd: check for REQ_NOWAIT and set correct page allocation mask
brd: return 0/-error from brd_insert_page()
block: sync mixed merged request's failfast with 1st bio's
Revert "blk-cgroup: pin the gendisk in struct blkcg_gq"
Revert "blk-cgroup: pass a gendisk to blkg_lookup"
Revert "blk-cgroup: delay blk-cgroup initialization until add_disk"
Revert "blk-cgroup: delay calling blkcg_exit_disk until disk_release"
Revert "blk-cgroup: move the cgroup information to struct gendisk"
nvme-pci: remove iod use_sgls
nvme-pci: fix freeing single sgl
block: ublk: check IO buffer based on flag need_get_data
s390/dasd: Fix potential memleak in dasd_eckd_init()
s390/dasd: sort out physical vs virtual pointers usage
block: Remove the ALLOC_CACHE_SLACK constant
block: make kobj_type structures constant
...
|
|
Return value mechanism of do_migrate_range() is not very simple, while no
caller of the function checks the return value. Make the function return
nothing to be more simple, and cleanup related unnecessary code.
Link: https://lkml.kernel.org/r/20230216170703.64574-1-sj@kernel.org
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The comment is obsolete after f369b07c8614 ("mm/uffd: reset write
protection when unregister with wp-mode", 2022-08-20). Remove it.
Link: https://lkml.kernel.org/r/20230215205800.223549-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now the isolate_movable_page() can only return 0 or -EBUSY, and no users
will care about the negative return value, thus we can convert the
isolate_movable_page() to return a boolean value to make the code more
clear when checking the movable page isolation state.
No functional changes intended.
[akpm@linux-foundation.org: remove unneeded comment, per Matthew]
Link: https://lkml.kernel.org/r/cb877f73f4fff8d309611082ec740a7065b1ade0.1676424378.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now the isolate_hugetlb() only returns 0 or -EBUSY, and most users did not
care about the negative value, thus we can convert the isolate_hugetlb()
to return a boolean value to make code more clear when checking the
hugetlb isolation state. Moreover converts 2 users which will consider
the negative value returned by isolate_hugetlb().
No functional changes intended.
[akpm@linux-foundation.org: shorten locked section, per SeongJae Park]
Link: https://lkml.kernel.org/r/12a287c5bebc13df304387087bbecc6421510849.1676424378.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The isolate_lru_page() can only return 0 or -EBUSY, and most users did not
care about the negative error of isolate_lru_page(), except one user in
add_page_for_migration(). So we can convert the isolate_lru_page() to
return a boolean value, which can help to make the code more clear when
checking the return value of isolate_lru_page().
Also convert all users' logic of checking the isolation state.
No functional changes intended.
Link: https://lkml.kernel.org/r/3074c1ab628d9dbf139b33f248a8bc253a3f95f0.1676424378.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Change the return value for page isolation functions", v3.
Now the page isolation functions did not return a boolean to indicate
success or not, instead it will return a negative error when failed
to isolate a page. So below code used in most places seem a boolean
success/failure thing, which can confuse people whether the isolation
is successful.
if (folio_isolate_lru(folio))
continue;
Moreover the page isolation functions only return 0 or -EBUSY, and
most users did not care about the negative error except for few users,
thus we can convert all page isolation functions to return a boolean
value, which can remove the confusion to make code more clear.
No functional changes intended in this patch series.
This patch (of 4):
Now the folio_isolate_lru() did not return a boolean value to indicate
isolation success or not, however below code checking the return value can
make people think that it was a boolean success/failure thing, which makes
people easy to make mistakes (see the fix patch[1]).
if (folio_isolate_lru(folio))
continue;
Thus it's better to check the negative error value expilictly returned by
folio_isolate_lru(), which makes code more clear per Linus's
suggestion[2]. Moreover Matthew suggested we can convert the isolation
functions to return a boolean[3], since most users did not care about the
negative error value, and can also remove the confusing of checking return
value.
So this patch converts the folio_isolate_lru() to return a boolean value,
which means return 'true' to indicate the folio isolation is successful,
and 'false' means a failure to isolation. Meanwhile changing all users'
logic of checking the isolation state.
No functional changes intended.
[1] https://lore.kernel.org/all/20230131063206.28820-1-Kuan-Ying.Lee@mediatek.com/T/#u
[2] https://lore.kernel.org/all/CAHk-=wiBrY+O-4=2mrbVyxR+hOqfdJ=Do6xoucfJ9_5az01L4Q@mail.gmail.com/
[3] https://lore.kernel.org/all/Y+sTFqwMNAjDvxw3@casper.infradead.org/
Link: https://lkml.kernel.org/r/cover.1676424378.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/8a4e3679ed4196168efadf7ea36c038f2f7d5aa9.1676424378.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
objtool warns about some suspicous code inside of kmsan:
vmlinux.o: warning: objtool: __msan_metadata_ptr_for_load_n+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_metadata_ptr_for_store_n+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_metadata_ptr_for_load_1+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_metadata_ptr_for_store_1+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_metadata_ptr_for_load_2+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_metadata_ptr_for_store_2+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_metadata_ptr_for_load_4+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_metadata_ptr_for_store_4+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_metadata_ptr_for_load_8+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_metadata_ptr_for_store_8+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_instrument_asm_store+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_chain_origin+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_poison_alloca+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_warning+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: __msan_get_context_state+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: kmsan_copy_to_user+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: kmsan_unpoison_memory+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: kmsan_unpoison_entry_regs+0x4: call to __fentry__() with UACCESS enabled
vmlinux.o: warning: objtool: kmsan_report+0x4: call to __fentry__() with UACCESS enabled
The Makefile contained a line to turn off ftrace for the entire directory,
but this does not work. Replace it with individual lines, matching the
approach in kasan.
Link: https://lkml.kernel.org/r/20230215130058.3836177-3-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: f80be4571b19 ("kmsan: add KMSAN runtime core")
Acked-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "objtool warning fixes", v2.
These are three of the easier fixes for objtool warnings around
kasan/kmsan/kcsan. I dropped one patch since Peter had come up with a
better fix, and adjusted the changelog text based on feedback.
This patch (of 3):
When the compiler decides not to inline this function, objtool complains
about incorrect UACCESS state:
mm/kasan/generic.o: warning: objtool: __asan_load2+0x11: call to addr_has_metadata() with UACCESS enabled
Link: https://lore.kernel.org/all/20230208164011.2287122-1-arnd@kernel.org/
Link: https://lkml.kernel.org/r/20230215130058.3836177-2-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs idmapping updates from Christian Brauner:
- Last cycle we introduced the dedicated struct mnt_idmap type for
mount idmapping and the required infrastucture in 256c8aed2b42 ("fs:
introduce dedicated idmap type for mounts"). As promised in last
cycle's pull request message this converts everything to rely on
struct mnt_idmap.
Currently we still pass around the plain namespace that was attached
to a mount. This is in general pretty convenient but it makes it easy
to conflate namespaces that are relevant on the filesystem with
namespaces that are relevant on the mount level. Especially for
non-vfs developers without detailed knowledge in this area this was a
potential source for bugs.
This finishes the conversion. Instead of passing the plain namespace
around this updates all places that currently take a pointer to a
mnt_userns with a pointer to struct mnt_idmap.
Now that the conversion is done all helpers down to the really
low-level helpers only accept a struct mnt_idmap argument instead of
two namespace arguments.
Conflating mount and other idmappings will now cause the compiler to
complain loudly thus eliminating the possibility of any bugs. This
makes it impossible for filesystem developers to mix up mount and
filesystem idmappings as they are two distinct types and require
distinct helpers that cannot be used interchangeably.
Everything associated with struct mnt_idmap is moved into a single
separate file. With that change no code can poke around in struct
mnt_idmap. It can only be interacted with through dedicated helpers.
That means all filesystems are and all of the vfs is completely
oblivious to the actual implementation of idmappings.
We are now also able to extend struct mnt_idmap as we see fit. For
example, we can decouple it completely from namespaces for users that
don't require or don't want to use them at all. We can also extend
the concept of idmappings so we can cover filesystem specific
requirements.
In combination with the vfs{g,u}id_t work we finished in v6.2 this
makes this feature substantially more robust and thus difficult to
implement wrong by a given filesystem and also protects the vfs.
- Enable idmapped mounts for tmpfs and fulfill a longstanding request.
A long-standing request from users had been to make it possible to
create idmapped mounts for tmpfs. For example, to share the host's
tmpfs mount between multiple sandboxes. This is a prerequisite for
some advanced Kubernetes cases. Systemd also has a range of use-cases
to increase service isolation. And there are more users of this.
However, with all of the other work going on this was way down on the
priority list but luckily someone other than ourselves picked this
up.
As usual the patch is tiny as all the infrastructure work had been
done multiple kernel releases ago. In addition to all the tests that
we already have I requested that Rodrigo add a dedicated tmpfs
testsuite for idmapped mounts to xfstests. It is to be included into
xfstests during the v6.3 development cycle. This should add a slew of
additional tests.
* tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: (26 commits)
shmem: support idmapped mounts for tmpfs
fs: move mnt_idmap
fs: port vfs{g,u}id helpers to mnt_idmap
fs: port fs{g,u}id helpers to mnt_idmap
fs: port i_{g,u}id_into_vfs{g,u}id() to mnt_idmap
fs: port i_{g,u}id_{needs_}update() to mnt_idmap
quota: port to mnt_idmap
fs: port privilege checking helpers to mnt_idmap
fs: port inode_owner_or_capable() to mnt_idmap
fs: port inode_init_owner() to mnt_idmap
fs: port acl to mnt_idmap
fs: port xattr to mnt_idmap
fs: port ->permission() to pass mnt_idmap
fs: port ->fileattr_set() to pass mnt_idmap
fs: port ->set_acl() to pass mnt_idmap
fs: port ->get_acl() to pass mnt_idmap
fs: port ->tmpfile() to pass mnt_idmap
fs: port ->rename() to pass mnt_idmap
fs: port ->mknod() to pass mnt_idmap
fs: port ->mkdir() to pass mnt_idmap
...
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee
Pull TEE update from Jens Wiklander:
"Remove get_kernel_pages()
Vmalloc page support is removed from shm_get_kernel_pages() and the
get_kernel_pages() call is replaced by calls to get_page(). With no
remaining callers of get_kernel_pages() the function is removed"
[ This looks like it's just some random 'tee' cleanup, but the bigger
picture impetus for this is really to to to remove historical
confusion with mixed use of kernel virtual addresses and 'struct page'
pointers.
Kernel virtual pointers in the vmalloc space is then particularly
confusing - both for looking up a page pointer (when trying to then
unify a "virtual address or page" interface) and _particularly_ when
mixed with HIGHMEM support and the kmap*() family of remapping.
This is particularly true with HIGHMEM getting much less test coverage
with 32-bit architectures being increasingly legacy targets.
So we actively wanted to remove get_kernel_pages() to make sure nobody
else used it too, and thus the 'tee' part is "finally remove last
user".
See also commit 6647e76ab623 ("v4l2: don't fall back to follow_pfn()
if pin_user_pages_fast() fails") for a totally different version of a
conceptually similar "let's stop this confusion of different ways of
referring to memory". - Linus ]
* tag 'remove-get_kernel_pages-for-6.3' of https://git.linaro.org/people/jens.wiklander/linux-tee:
mm: Remove get_kernel_pages()
tee: Remove call to get_kernel_pages()
tee: Remove vmalloc page support
highmem: Enhance is_kmap_addr() to check kmap_local_page() mappings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Six hotfixes. Five are cc:stable: four for MM, one for nilfs2.
Also a MAINTAINERS update"
* tag 'mm-hotfixes-stable-2023-02-17-15-16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: fix underflow in second superblock position calculations
hugetlb: check for undefined shift on 32 bit architectures
mm/migrate: fix wrongly apply write bit after mkdirty on sparc64
MAINTAINERS: update FPU EMULATOR web page
mm/MADV_COLLAPSE: set EAGAIN on unexpected page refcount
mm/filemap: fix page end in filemap_get_read_batch
|
|
Nick Bowler reported another sparc64 breakage after the young/dirty
persistent work for page migration (per "Link:" below). That's after a
similar report [2].
It turns out page migration was overlooked, and it wasn't failing before
because page migration was not enabled in the initial report test
environment.
David proposed another way [2] to fix this from sparc64 side, but that
patch didn't land somehow. Neither did I check whether there's any other
arch that has similar issues.
Let's fix it for now as simple as moving the write bit handling to be
after dirty, like what we did before.
Note: this is based on mm-unstable, because the breakage was since 6.1 and
we're at a very late stage of 6.2 (-rc8), so I assume for this specific
case we should target this at 6.3.
[1] https://lore.kernel.org/all/20221021160603.GA23307@u164.east.ru/
[2] https://lore.kernel.org/all/20221212130213.136267-1-david@redhat.com/
Link: https://lkml.kernel.org/r/20230216153059.256739-1-peterx@redhat.com
Fixes: 2e3468778dbe ("mm: remember young/dirty bit for page migrations")
Link: https://lore.kernel.org/all/CADyTPExpEqaJiMGoV+Z6xVgL50ZoMJg49B10LcZ=8eg19u34BA@mail.gmail.com/
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Nick Bowler <nbowler@draconx.ca>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Nick Bowler <nbowler@draconx.ca>
Cc: <regressions@lists.linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently there are two kmem-related helper functions with a confusing
semantics: memcg_kmem_enabled() and mem_cgroup_kmem_disabled().
The problem is that an obvious expectation
memcg_kmem_enabled() == !mem_cgroup_kmem_disabled(),
can be false.
mem_cgroup_kmem_disabled() is similar to mem_cgroup_disabled(): it returns
true only if CONFIG_MEMCG_KMEM is not set or the kmem accounting is
disabled using a boot time kernel option "cgroup.memory=nokmem". It never
changes the value dynamically.
memcg_kmem_enabled() is different: it always returns false until the first
non-root memory cgroup will get online (assuming the kernel memory
accounting is enabled). It's goal is to improve the performance on
systems without the cgroupfs mounted/memory controller enabled or on the
systems with only the root memory cgroup.
To make things more obvious and avoid potential bugs, let's rename
memcg_kmem_enabled() to memcg_kmem_online().
Link: https://lkml.kernel.org/r/20230213192922.1146370-1-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The extra space which is used to store the obj_cgroup membership is only
valid when kmemcg is enabled. The kmemcg can be disabled via the kernel
parameter "cgroup.memory=nokmem" at boot time. This helper is also used
in non-memcg code, for example the tracepoint, so we should fix it.
It was found by code review when I was implementing bpf memory usage[1].
No real issue happens in production environment.
[1]. https://lwn.net/Articles/921991/
Link: https://lkml.kernel.org/r/20230214153549.12291-1-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Vasily Averin <vvs@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In free_area_init(), we will continue to run after allocation of
memoryless node pgdat fails. However, in the subsequent process (such as
when initializing zonelist), the case that NODE_DATA(nid) is NULL is not
handled, which will cause panic. Instead of this, it's better to call
panic() directly when the memory allocation fails during system boot.
Link: https://lkml.kernel.org/r/20230212111027.95520-1-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Recall that the per-node memcg LRU has two generations and they alternate
when the last memcg (of a given node) is moved from one to the other.
Each generation is also sharded into multiple bins to improve scalability.
A reclaimer starts with a random bin (in the old generation) and, if it
fails, it will retry, i.e., to try the rest of the bins.
If a reclaimer fails with the last memcg, it should move this memcg to the
young generation first, which causes the generations to alternate, and
then retry. Otherwise, the retries will be futile because all other bins
are empty.
Link: https://lkml.kernel.org/r/20230213075322.1416966-1-yuzhao@google.com
Fixes: e4dde56cd208 ("mm: multi-gen LRU: per-node lru_gen_folio lists")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reported-by: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This is a code cleanup patch, no functionality change is expected. After
the change, the line number reduces especially in the long
migrate_pages_batch().
Link: https://lkml.kernel.org/r/20230213123444.155149-10-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Suggested-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The TLB flushing will cost quite some CPU cycles during the folio
migration in some situations. For example, when migrate a folio of a
process with multiple active threads that run on multiple CPUs. After
batching the _unmap and _move in migrate_pages(), the TLB flushing can be
batched easily with the existing TLB flush batching mechanism. This patch
implements that.
We use the following test case to test the patch.
On a 2-socket Intel server,
- Run pmbench memory accessing benchmark
- Run `migratepages` to migrate pages of pmbench between node 0 and
node 1 back and forth.
With the patch, the TLB flushing IPI reduces 99.1% during the test and the
number of pages migrated successfully per second increases 291.7%.
Haoxin helped to test the patchset on an ARM64 server with 128 cores, 2
NUMA nodes. Test results show that the page migration performance
increases up to 78%.
NOTE: TLB flushing is batched only for normal folios, not for THP folios.
Because the overhead of TLB flushing for THP folios is much lower than
that for normal folios (about 1/512 on x86 platform).
Link: https://lkml.kernel.org/r/20230213123444.155149-9-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This is a code cleanup patch to reduce the duplicated code between the
_unmap and _move stages of migrate_pages(). No functionality change is
expected.
Link: https://lkml.kernel.org/r/20230213123444.155149-8-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Just move the position of the functions. There's no any functionality
change. This is to make it easier to review the next patch via putting
code near its position in the next patch.
Link: https://lkml.kernel.org/r/20230213123444.155149-7-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In this patch the _unmap and _move stage of the folio migration is
batched. That for, previously, it is,
for each folio
_unmap()
_move()
Now, it is,
for each folio
_unmap()
for each folio
_move()
Based on this, we can batch the TLB flushing and use some hardware
accelerator to copy folios between batched _unmap and batched _move
stages.
Link: https://lkml.kernel.org/r/20230213123444.155149-6-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This is a preparation patch to batch the folio unmapping and moving.
In this patch, unmap_and_move() is split to migrate_folio_unmap() and
migrate_folio_move(). So, we can batch _unmap() and _move() in different
loops later. To pass some information between unmap and move, the
original unused dst->mapping and dst->private are used.
Link: https://lkml.kernel.org/r/20230213123444.155149-5-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This is a preparation patch to batch the folio unmapping and moving for
non-hugetlb folios.
If we had batched the folio unmapping, all folios to be migrated would be
unmapped before copying the contents and flags of the folios. If the
folios that were passed to migrate_pages() were too many in unit of pages,
the execution of the processes would be stopped for too long time, thus
too long latency. For example, migrate_pages() syscall will call
migrate_pages() with all folios of a process. To avoid this possible
issue, in this patch, we restrict the number of pages to be migrated to be
no more than HPAGE_PMD_NR. That is, the influence is at the same level of
THP migration.
Link: https://lkml.kernel.org/r/20230213123444.155149-4-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This is a preparation patch to batch the folio unmapping and moving for
the non-hugetlb folios. Based on that we can batch the TLB shootdown
during the folio migration and make it possible to use some hardware
accelerator for the folio copying.
In this patch the hugetlb folios and non-hugetlb folios migration is
separated in migrate_pages() to make it easy to change the non-hugetlb
folios migration implementation.
Link: https://lkml.kernel.org/r/20230213123444.155149-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "migrate_pages(): batch TLB flushing", v5.
Now, migrate_pages() migrates folios one by one, like the fake code as
follows,
for each folio
unmap
flush TLB
copy
restore map
If multiple folios are passed to migrate_pages(), there are opportunities
to batch the TLB flushing and copying. That is, we can change the code to
something as follows,
for each folio
unmap
for each folio
flush TLB
for each folio
copy
for each folio
restore map
The total number of TLB flushing IPI can be reduced considerably. And we
may use some hardware accelerator such as DSA to accelerate the folio
copying.
So in this patch, we refactor the migrate_pages() implementation and
implement the TLB flushing batching. Base on this, hardware accelerated
folio copying can be implemented.
If too many folios are passed to migrate_pages(), in the naive batched
implementation, we may unmap too many folios at the same time. The
possibility for a task to wait for the migrated folios to be mapped again
increases. So the latency may be hurt. To deal with this issue, the max
number of folios be unmapped in batch is restricted to no more than
HPAGE_PMD_NR in the unit of page. That is, the influence is at the same
level of THP migration.
We use the following test to measure the performance impact of the
patchset,
On a 2-socket Intel server,
- Run pmbench memory accessing benchmark
- Run `migratepages` to migrate pages of pmbench between node 0 and
node 1 back and forth.
With the patch, the TLB flushing IPI reduces 99.1% during the test and
the number of pages migrated successfully per second increases 291.7%.
Xin Hao helped to test the patchset on an ARM64 server with 128 cores,
2 NUMA nodes. Test results show that the page migration performance
increases up to 78%.
This patch (of 9):
Define struct migrate_pages_stats to organize the various statistics in
migrate_pages(). This makes it easier to collect and consume the
statistics in multiple functions. This will be needed in the following
patches in the series.
Link: https://lkml.kernel.org/r/20230213123444.155149-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20230213123444.155149-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current implementation of the extra_bits interface is confusing:
passing extra_bits to __stack_depot_save makes it seem that the extra
bits are somehow stored in stack depot. In reality, they are only
embedded into a stack depot handle and are not used within stack depot.
Drop the extra_bits argument from __stack_depot_save and instead provide
a new stack_depot_set_extra_bits function (similar to the exsiting
stack_depot_get_extra_bits) that saves extra bits into a stack depot
handle.
Update the callers of __stack_depot_save to use the new interace.
This change also fixes a minor issue in the old code: __stack_depot_save
does not return NULL if saving stack trace fails and extra_bits is used.
Link: https://lkml.kernel.org/r/317123b5c05e2f82854fc55d8b285e0869d3cb77.1676063693.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Rename stack_depot_want_early_init to stack_depot_request_early_init.
The old name is confusing, as it hints at returning some kind of intention
of stack depot. The new name reflects that this function requests an
action from stack depot instead.
No functional changes.
[akpm@linux-foundation.org: update mm/kmemleak.c]
Link: https://lkml.kernel.org/r/359f31bf67429a06e630b4395816a967214ef753.1676063693.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
During collapse, in a few places we check to see if a given small page has
any unaccounted references. If the refcount on the page doesn't match our
expectations, it must be there is an unknown user concurrently interested
in the page, and so it's not safe to move the contents elsewhere.
However, the unaccounted pins are likely an ephemeral state.
In this situation, MADV_COLLAPSE returns -EINVAL when it should return
-EAGAIN. This could cause userspace to conclude that the syscall
failed, when it in fact could succeed by retrying.
Link: https://lkml.kernel.org/r/20230125015738.912924-1-zokeefe@google.com
Fixes: 7d8faaf15545 ("mm/madvise: introduce MADV_COLLAPSE sync hugepage collapse")
Signed-off-by: Zach O'Keefe <zokeefe@google.com>
Reported-by: Hugh Dickins <hughd@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
I was running traces of the read code against an RAID storage system to
understand why read requests were being misaligned against the underlying
RAID strips. I found that the page end offset calculation in
filemap_get_read_batch() was off by one.
When a read is submitted with end offset 1048575, then it calculates the
end page for read of 256 when it should be 255. "last_index" is the index
of the page beyond the end of the read and it should be skipped when get a
batch of pages for read in @filemap_get_read_batch().
The below simple patch fixes the problem. This code was introduced in
kernel 5.12.
Link: https://lkml.kernel.org/r/20230208022400.28962-1-coolqyj@163.com
Fixes: cbd59c48ae2b ("mm/filemap: use head pages in generic_file_buffered_read")
Signed-off-by: Qian Yingjin <qian@ddn.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Link: https://lkml.kernel.org/r/20230210203316.5613-1-jwilk@jwilk.net
Signed-off-by: Jakub Wilk <jwilk@jwilk.net>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON debugfs interface has announced to be deprecated after >v5.15 LTS
kernel is released. And, v6.1.y has announced to be an LTS[1].
Though the announcement was there for a while, some people might not
noticed that so far. Also, some users could depend on it and have
problems at movng to the alternative (DAMON sysfs interface).
For such cases, warn DAMON debugfs interface deprecation with contacts
to ask helps when any DAMON debugfs interface file is opened.
[1] https://git.kernel.org/pub/scm/docs/kernel/website.git/commit/?id=332e9121320bc7461b2d3a79665caf153e51732c
[sj@kernel.org: split DAMON debugfs file open warning message, per Randy]
Link: https://lkml.kernel.org/r/20230209192009.7885-4-sj@kernel.org
Link: https://lkml.kernel.org/r/20230210044838.63723-4-sj@kernel.org
Link: https://lkml.kernel.org/r/20230209192009.7885-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON debugfs interface has announced to be deprecated after >v5.15 LTS
kernel is released. And, v6.1.y has announced to be an LTS[1].
Though the announcement was there for a while, some people might not
noticed that so far. Also, some users could depend on it and have
problems at movng to the alternative (DAMON sysfs interface).
For such cases, note DAMON debugfs interface as deprecated, and contacts
to ask helps on the Kconfig.
[1] https://git.kernel.org/pub/scm/docs/kernel/website.git/commit/?id=332e9121320bc7461b2d3a79665caf153e51732c
Link: https://lkml.kernel.org/r/20230209192009.7885-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Removes 6 calls to compound_head(), and replaces putback_movable_page()
with putback_movable_folio() as well.
Link: https://lkml.kernel.org/r/20230130214352.40538-5-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
