summaryrefslogtreecommitdiff
path: root/net/batman-adv/netlink.c
AgeCommit message (Collapse)AuthorFilesLines
2022-11-07genetlink: introduce split op representationJakub Kicinski1-2/+4
We currently have two forms of operations - small ops and "full" ops (or just ops). The former does not have pointers for some of the less commonly used features (namely dump start/done and policy). The "full" ops, however, still don't contain all the necessary information. In particular the policy is per command ID, while do and dump often accept different attributes. It's also not possible to define different pre_doit and post_doit callbacks for different commands within the family. At the same time a lot of commands do not support dumping and therefore all the dump-related information is wasted space. Create a new command representation which can hold info about a do implementation or a dump implementation, but not both at the same time. Use this new representation on the command execution path (genl_family_rcv_msg) as we either run a do or a dump and don't have to create a "full" op there. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-29genetlink: start to validate reserved header bytesJakub Kicinski1-0/+1
We had historically not checked that genlmsghdr.reserved is 0 on input which prevents us from using those precious bytes in the future. One use case would be to extend the cmd field, which is currently just 8 bits wide and 256 is not a lot of commands for some core families. To make sure that new families do the right thing by default put the onus of opting out of validation on existing families. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Paul Moore <paul@paul-moore.com> (NetLabel) Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-15batman-adv: allow netlink usage in unprivileged containersLinus Lüssing1-15/+15
Currently, creating a batman-adv interface in an unprivileged LXD container and attaching secondary interfaces to it with "ip" or "batctl" works fine. However all batctl debug and configuration commands fail: root@container:~# batctl originators Error received: Operation not permitted root@container:~# batctl orig_interval 1000 root@container:~# batctl orig_interval 2000 root@container:~# batctl orig_interval 1000 To fix this change the generic netlink permissions from GENL_ADMIN_PERM to GENL_UNS_ADMIN_PERM. This way a batman-adv interface is fully maintainable as root from within a user namespace, from an unprivileged container. All except one batman-adv netlink setting are per interface and do not leak information or change settings from the host system and are therefore save to retrieve or modify as root from within an unprivileged container. "batctl routing_algo" / BATADV_CMD_GET_ROUTING_ALGOS is the only exception: It provides the batman-adv kernel module wide default routing algorithm. However it is read-only from netlink and an unprivileged container is still not allowed to modify /sys/module/batman_adv/parameters/routing_algo. Instead it is advised to use the newly introduced "batctl if create routing_algo RA_NAME" / IFLA_BATADV_ALGO_NAME to set the routing algorithm on interface creation, which already works fine in an unprivileged container. Cc: Tycho Andersen <tycho@tycho.pizza> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2021-08-08batman-adv: Drop NULL check before dropping referencesSven Eckelmann1-4/+2
The check if a batman-adv related object is NULL or not is now directly in the batadv_*_put functions. It is not needed anymore to perform this check outside these function: The changes were generated using a coccinelle semantic patch: @@ expression E; @@ - if (likely(E != NULL)) ( batadv_backbone_gw_put | batadv_claim_put | batadv_dat_entry_put | batadv_gw_node_put | batadv_hardif_neigh_put | batadv_hardif_put | batadv_nc_node_put | batadv_nc_path_put | batadv_neigh_ifinfo_put | batadv_neigh_node_put | batadv_orig_ifinfo_put | batadv_orig_node_put | batadv_orig_node_vlan_put | batadv_softif_vlan_put | batadv_tp_vars_put | batadv_tt_global_entry_put | batadv_tt_local_entry_put | batadv_tt_orig_list_entry_put | batadv_tt_req_node_put | batadv_tvlv_container_put | batadv_tvlv_handler_put )(E); Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2021-05-17batman-adv: Always send iface index+name in genlmsgSven Eckelmann1-0/+8
The batman-adv netlink messages often contain the interface index and interface name in the same message. This makes it easy for the receiver to operate on the incoming data when it either needs to print something or needs to operate on the interface index. But one of the attributes was missing for: * neighbor table dumps * originator table dumps * gateway list dumps * query of hardif information * query of vid information The userspace therefore had to implement special workarounds using SIOCGIFNAME or SIOCGIFINDEX depending on what was actually provided. Providing both information simplifies the userspace code massively without adding a lot of extra overhead in the kernel portion. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2021-02-06batman-adv: Fix names for kernel-doc blocksSven Eckelmann1-2/+2
kernel-doc can only correctly identify the documented function or struct when the name in the first kernel-doc line references it. But some of the kernel-doc blocks referenced a different function/struct then it actually documented. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2021-02-06batman-adv: Drop publication years from copyright infoSven Eckelmann1-1/+1
The batman-adv source code was using the year of publication (to net-next) as "last" year for the copyright statement. The whole source code mentioned in the MAINTAINERS "BATMAN ADVANCED" section was handled as a single entity regarding the publishing year. This avoided having outdated (in sense of year information - not copyright holder) publishing information inside several files. But since the simple "update copyright year" commit (without other changes) in the file was not well received in the upstream kernel, the option to not have a copyright year (for initial and last publication) in the files are chosen instead. More detailed information about the years can still be retrieved from the SCM system. Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-12-04batman-adv: Add new include for min/max helpersSven Eckelmann1-0/+1
The commit b296a6d53339 ("kernel.h: split out min()/max() et al. helpers") moved the min/max helper functionality from kernel.h to minmax.h. Adjust the kernel code accordingly to avoid fragile indirect includes. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-10-03genetlink: move to smaller ops wherever possibleJakub Kicinski1-3/+3
Bulk of the genetlink users can use smaller ops, move them. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26batman-adv: Introduce a configurable per interface hop penaltyLinus Lüssing1-1/+11
In some setups multiple hard interfaces with similar link qualities or throughput values are available. But people have expressed the desire to consider one of them as a backup only. Some creative solutions are currently in use: Such people are configuring multiple batman-adv mesh/soft interfaces, wire them together with some veth pairs and then tune the hop penalty to achieve an effect similar to a tunable per interface hop penalty. This patch introduces a new, configurable, per hard interface hop penalty to simplify such setups. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-06-26batman-adv: Fix typos and grammar in documentationSven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-01-01batman-adv: Update copyright years for 2020Sven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-08-14batman-adv: fix uninit-value in batadv_netlink_get_ifindex()Eric Dumazet1-1/+1
batadv_netlink_get_ifindex() needs to make sure user passed a correct u32 attribute. syzbot reported : BUG: KMSAN: uninit-value in batadv_netlink_dump_hardif+0x70d/0x880 net/batman-adv/netlink.c:968 CPU: 1 PID: 11705 Comm: syz-executor888 Not tainted 5.1.0+ #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x191/0x1f0 lib/dump_stack.c:113 kmsan_report+0x130/0x2a0 mm/kmsan/kmsan.c:622 __msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:310 batadv_netlink_dump_hardif+0x70d/0x880 net/batman-adv/netlink.c:968 genl_lock_dumpit+0xc6/0x130 net/netlink/genetlink.c:482 netlink_dump+0xa84/0x1ab0 net/netlink/af_netlink.c:2253 __netlink_dump_start+0xa3a/0xb30 net/netlink/af_netlink.c:2361 genl_family_rcv_msg net/netlink/genetlink.c:550 [inline] genl_rcv_msg+0xfc1/0x1a40 net/netlink/genetlink.c:627 netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2486 genl_rcv+0x63/0x80 net/netlink/genetlink.c:638 netlink_unicast_kernel net/netlink/af_netlink.c:1311 [inline] netlink_unicast+0xf3e/0x1020 net/netlink/af_netlink.c:1337 netlink_sendmsg+0x127e/0x12f0 net/netlink/af_netlink.c:1926 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:661 [inline] ___sys_sendmsg+0xcc6/0x1200 net/socket.c:2260 __sys_sendmsg net/socket.c:2298 [inline] __do_sys_sendmsg net/socket.c:2307 [inline] __se_sys_sendmsg+0x305/0x460 net/socket.c:2305 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2305 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x440209 Fixes: b60620cf567b ("batman-adv: netlink: hardif query") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-05-25batman-adv: Use includes instead of fwdeclsSven Eckelmann1-2/+1
While it can be slightly beneficial for the build performance to use forward declarations instead of includes, the handling of them together with changes in the included headers makes it unnecessary complicated and fragile. Just replace them with actual includes since some parts (hwmon, ..) of the kernel even request avoidance of forward declarations and net/ is mostly not using them in *.c file. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-05-25batman-adv: Fix includes for *_MAX constantsSven Eckelmann1-0/+1
The commit 54d50897d544 ("linux/kernel.h: split *_MAX and *_MIN macros into <linux/limits.h>") moved the U32_MAX/INT_MAX/ULONG_MAX from linux/kernel.h to linux/limits.h. Adjust the includes accordingly. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-04-28genetlink: optionally validate strictly/dumpsJohannes Berg1-0/+18
Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28Merge tag 'batadv-next-for-davem-20190328' of ↵David S. Miller1-12/+11
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This feature/cleanup patchset includes the following patches: - Drop license boilerplate (obsoleted by SPDX license IDs), by Sven Eckelmann - Drop documentation for sysfs and debugfs Documentation, by Sven Eckelmann (2 patches) - Mark sysfs as optional and deprecated, by Sven Eckelmann (3 patches) - Update MAINTAINERS Tree, Chat and Bugtracker, by Sven Eckelmann (3 patches) - Rename batadv_dat_send_data, by Sven Eckelmann - update DAT entries with incoming ARP replies, by Linus Luessing - add multicast-to-unicast support for limited destinations, by Linus Luessing ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-25batman-adv: Add multicast-to-unicast support for multiple targetsLinus Lüssing1-0/+11
With this patch multicast packets with a limited number of destinations (current default: 16) will be split and transmitted by the originator as individual unicast transmissions. Wifi broadcasts with their low bitrate are still a costly undertaking. In a mesh network this cost multiplies with the overall size of the mesh network. Therefore using multiple unicast transmissions instead of broadcast flooding is almost always less burdensome for the mesh network. The maximum amount of unicast packets can be configured via the newly introduced multicast_fanout parameter. If this limit is exceeded distribution will fall back to classic broadcast flooding. The multicast-to-unicast conversion is performed on the initial multicast sender node and counts on a final destination node, mesh-wide basis (and not next hop, neighbor node basis). Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-03-25batman-adv: Drop license boilerplateSven Eckelmann1-12/+0
All files got a SPDX-License-Identifier with commit 7db7d9f369a4 ("batman-adv: Add SPDX license identifier above copyright header"). All the required information about the license conditions can be found in LICENSES/. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-03-22genetlink: make policy common to familyJohannes Berg1-18/+1
Since maxattr is common, the policy can't really differ sanely, so make it common as well. The only user that did in fact manage to make a non-common policy is taskstats, which has to be really careful about it (since it's still using a common maxattr!). This is no longer supported, but we can fake it using pre_doit. This reduces the size of e.g. nl80211.o (which has lots of commands): text data bss dec hex filename 398745 14323 2240 415308 6564c net/wireless/nl80211.o (before) 397913 14331 2240 414484 65314 net/wireless/nl80211.o (after) -------------------------------- -832 +8 0 -824 Which is obviously just 8 bytes for each command, and an added 8 bytes for the new policy pointer. I'm not sure why the ops list is counted as .text though. Most of the code transformations were done using the following spatch: @ops@ identifier OPS; expression POLICY; @@ struct genl_ops OPS[] = { ..., { - .policy = POLICY, }, ... }; @@ identifier ops.OPS; expression ops.POLICY; identifier fam; expression M; @@ struct genl_family fam = { .ops = OPS, .maxattr = M, + .policy = POLICY, ... }; This also gets rid of devlink_nl_cmd_region_read_dumpit() accessing the cb->data as ops, which we want to change in a later genl patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-09batman-adv: Trigger genl notification on sysfs config changeSven Eckelmann1-5/+5
The generic netlink code is expected to trigger notification messages when configuration might have been changed. But the configuration of batman-adv is most of the time still done using sysfs. So the sysfs interface should also trigger the corresponding netlink messages via the "config" multicast group. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add throughput_override hardif genl configurationSven Eckelmann1-0/+12
The B.A.T.M.A.N. V implementation tries to estimate the link throughput of an interface to an originator using different automatic methods. It is still possible to overwrite it the link throughput for all reachable originators via this interface. The BATADV_CMD_SET_HARDIF/BATADV_CMD_GET_HARDIF commands allow to set/get the configuration of this feature using the u32 BATADV_ATTR_THROUGHPUT_OVERRIDE attribute. The used unit is in 100 Kbit/s. If the value is set to 0 then batman-adv will try to estimate the throughput by itself. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add elp_interval hardif genl configurationSven Eckelmann1-0/+17
The ELP packets are transmitted every elp_interval milliseconds on an slave/hard-interface. This value can be changed using the configuration interface. The BATADV_CMD_SET_HARDIF/BATADV_CMD_GET_HARDIF commands allow to set/get the configuration of this feature using the u32 BATADV_ATTR_ELP_INTERVAL attribute. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add orig_interval mesh genl configurationSven Eckelmann1-0/+17
The OGM packets are transmitted every orig_interval milliseconds. This value can be changed using the configuration interface. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the u32 BATADV_ATTR_ORIG_INTERVAL attribute. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add network_coding mesh genl configurationSven Eckelmann1-0/+17
The mesh interface can use (in an homogeneous mesh) network coding, a mechanism that aims to increase the overall network throughput by fusing multiple packets in one transmission. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_NETWORK_CODING_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add multicast forceflood mesh genl configurationSven Eckelmann1-0/+15
The mesh interface can optimize the flooding of multicast packets based on the content of the global translation tables. To disable this behavior and use the broadcast-like flooding of the packets, forceflood has to be enabled. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED attribute. Setting the u8 to zero will disable this feature (allowing multicast optimizations) and setting it to something else is enabling this feature (forcing simple flooding). Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add log_level mesh genl configurationSven Eckelmann1-0/+17
In contrast to other modules, batman-adv allows to set the debug message verbosity per mesh/soft-interface and not per module (via modparam). The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the u32 (bitmask) BATADV_ATTR_LOG_LEVEL attribute. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add hop_penalty mesh genl configurationSven Eckelmann1-0/+11
The TQ (B.A.T.M.A.N. IV) and throughput values (B.A.T.M.A.N. V) are reduced when they are forwarded. One of the reductions is the penalty for traversing an additional hop. This hop_penalty (0-255) defines the percentage of reduction (0-100%). The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the u8 BATADV_ATTR_HOP_PENALTY attribute. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add gateway mesh genl configurationSven Eckelmann1-0/+92
The mesh/soft-interface can optimize the handling of DHCP packets. Instead of flooding them through the whole mesh, it can be forwarded as unicast to a specific gateway server. The originator which injects the packets in the mesh has to select (based on sel_class thresholds) a responsible gateway server. This is done by switching this originator to the gw_mode client. The servers announce their forwarding bandwidth (download/upload) when the gw_mode server was selected. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the attributes: * u8 BATADV_ATTR_GW_MODE (0 == off, 1 == client, 2 == server) * u32 BATADV_ATTR_GW_BANDWIDTH_DOWN (in 100 kbit/s steps) * u32 BATADV_ATTR_GW_BANDWIDTH_UP (in 100 kbit/s steps) * u32 BATADV_ATTR_GW_SEL_CLASS Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add fragmentation mesh genl configurationSven Eckelmann1-0/+12
The mesh interface can fragment unicast packets when the packet size exceeds the outgoing slave/hard-interface MTU. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_FRAGMENTATION_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add distributed_arp_table mesh genl configurationSven Eckelmann1-0/+17
The mesh interface can use a distributed hash table to answer ARP requests without flooding the request through the whole mesh. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add bridge_loop_avoidance mesh genl configurationSven Eckelmann1-0/+17
The mesh interface can try to detect loops in the same mesh caused by (indirectly) bridged mesh/soft-interfaces of different nodes. Some of the loops can also be resolved without breaking the mesh. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add bonding mesh genl configurationSven Eckelmann1-0/+11
The mesh interface can use multiple slave/hard-interface ports at the same time to transport the traffic to other nodes. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_BONDING_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add ap_isolation mesh/vlan genl configurationSven Eckelmann1-0/+89
The mesh interface can drop messages between clients to implement a mesh-wide AP isolation. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH and BATADV_CMD_SET_VLAN/BATADV_CMD_GET_VLAN commands allow to set/get the configuration of this feature using the BATADV_ATTR_AP_ISOLATION_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. This feature also requires that skbuff which should be handled as isolated are marked. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the mark/mask using the u32 attributes BATADV_ATTR_ISOLATION_MARK and BATADV_ATTR_ISOLATION_MASK. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add aggregated_ogms mesh genl configurationSven Eckelmann1-0/+12
The mesh interface can delay OGM messages to aggregate different ogms together in a single OGM packet. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_AGGREGATED_OGMS_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Prepare framework for vlan genl configSven Eckelmann1-2/+189
The batman-adv configuration interface was implemented solely using sysfs. This approach was condemned by non-batadv developers as "huge mistake". Instead a netlink/genl based implementation was suggested. Beside the mesh/soft-interface specific configuration, the VLANs on top of the mesh/soft-interface have configuration settings. The genl interface reflects this by allowing to get/set it using the vlan specific commands BATADV_CMD_GET_VLAN/BATADV_CMD_SET_VLAN. The set command BATADV_CMD_SET_MESH will also notify interested userspace listeners of the "config" mcast group using the BATADV_CMD_SET_VLAN command message type that settings might have been changed and what the current values are. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Prepare framework for hardif genl configSven Eckelmann1-21/+219
The batman-adv configuration interface was implemented solely using sysfs. This approach was condemned by non-batadv developers as "huge mistake". Instead a netlink/genl based implementation was suggested. Beside the mesh/soft-interface specific configuration, the slave/hard-interface have B.A.T.M.A.N. V specific configuration settings. The genl interface reflects this by allowing to get/set it using the hard-interface specific commands. The BATADV_CMD_GET_HARDIFS (or short version BATADV_CMD_GET_HARDIF) is reused as get command because it already allow sto dump the content of other information from the slave/hard-interface which are not yet configuration specific. The set command BATADV_CMD_SET_HARDIF will also notify interested userspace listeners of the "config" mcast group using the BATADV_CMD_SET_HARDIF command message type that settings might have been changed and what the current values are. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Prepare framework for mesh genl configSven Eckelmann1-62/+98
The batman-adv configuration interface was implemented solely using sysfs. This approach was condemned by non-batadv developers as "huge mistake". Instead a netlink/genl based implementation was suggested. The main objects for this configuration is the mesh/soft-interface object. Its actual object in memory already contains most of the available configuration settings. The genl interface reflects this by allowing to get/set it using the mesh specific commands. The BATADV_CMD_GET_MESH_INFO (or short version BATADV_CMD_GET_MESH) is reused as get command because it already provides the content of other information from the mesh/soft-interface which are not yet configuration specific. The set command BATADV_CMD_SET_MESH will also notify interested userspace listeners of the "config" mcast group using the BATADV_CMD_SET_MESH command message type that settings might have been changed and what the current values are. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Move common genl doit code pre/post hooksSven Eckelmann1-43/+100
The commit ff4c92d85c6f ("genetlink: introduce pre_doit/post_doit hooks") intoduced a mechanism to run specific code for doit hooks before/after the hooks are run. Since all doit hooks are requiring the batadv softif, it should be retrieved/freed in these helpers to simplify the code. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-01-04batman-adv: Update copyright years for 2019Sven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Add inconsistent hardif netlink dump detectionSven Eckelmann1-10/+14
The netlink dump functionality transfers a large number of entries from the kernel to userspace. It is rather likely that the transfer has to interrupted and later continued. During that time, it can happen that either new entries are added or removed. The userspace could than either receive some entries multiple times or miss entries. Commit 670dc2833d14 ("netlink: advertise incomplete dumps") introduced a mechanism to inform userspace about this problem. Userspace can then decide whether it is necessary or not to retry dumping the information again. The netlink dump functions have to be switched to exclusive locks to avoid changes while the current message is prepared. And an external generation sequence counter is introduced which tracks all modifications of the list. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-03-14batman-adv: add multicast flags netlink supportLinus Lüssing1-0/+12
Dump the list of multicast flags entries via the netlink socket. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-03-14batman-adv: add DAT cache netlink supportLinus Lüssing1-33/+43
Dump the list of DAT cache entries via the netlink socket. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-26batman-adv: Update copyright years for 2018Sven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-21batman-adv: Convert packet.h to uapi headerSven Eckelmann1-1/+1
The header file is used by different userspace programs to inject packets or to decode sniffed packets. It should therefore be available to them as userspace header. Also other components in the kernel (like the flow dissector) require access to the packet definitions to be able to decode ETH_P_BATMAN ethernet packets. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15batman-adv: Use parentheses in function kernel-docSven Eckelmann1-11/+11
The documentation describing kernel-doc comments for functions ("How to format kernel-doc comments") uses parentheses at the end of the function name. Using this format allows to use a consistent style when adding documentation to a function and when referencing this function in a different kernel-doc section. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-15batman-adv: include gfp.h for GFP_* definesSven Eckelmann1-1/+1
The linux/gfp.h provides the GFP_ATOMIC and GFP_KERNEL define. It should therefore be included instead of linux/fs.h. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-15batman-adv: Add SPDX license identifier above copyright headerSven Eckelmann1-0/+1
The "Linux kernel licensing rules" require that each file has a SPDX license identifier as first line (and sometimes as second line). The FSFE REUSE practices [1] would also require the same tags but have no restrictions on the placement in the source file. Using the "Linux kernel licensing rules" is therefore also fulfilling the FSFE REUSE practices requirements at the same time. [1] https://reuse.software/practices/ Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-01-26batman-adv: update copyright years for 2017Sven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-30batman-adv: Mark batadv_netlink_ops as constSven Eckelmann1-1/+1
The genl_ops don't need to be written by anyone and thus can be moved in a ro memory range. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>