summaryrefslogtreecommitdiff
path: root/net/batman-adv/routing.c
AgeCommit message (Collapse)AuthorFilesLines
2018-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-10/+15
Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-18batman-adv: Fix skbuff rcsum on packet rerouteSven Eckelmann1-5/+10
batadv_check_unicast_ttvn may redirect a packet to itself or another originator. This involves rewriting the ttvn and the destination address in the batadv unicast header. These field were not yet pulled (with skb rcsum update) and thus any change to them also requires a change in the receive checksum. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Fixes: a73105b8d4c7 ("batman-adv: improved client announcement mechanism") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-03-16batman-adv: update data pointers after skb_cow()Matthias Schiffer1-5/+5
batadv_check_unicast_ttvn() calls skb_cow(), so pointers into the SKB data must be (re)set after calling it. The ethhdr variable is dropped altogether. Fixes: 7cdcf6dddc42 ("batman-adv: add UNICAST_4ADDR packet type") Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-26batman-adv: Update copyright years for 2018Sven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-21batman-adv: Convert packet.h to uapi headerSven Eckelmann1-1/+1
The header file is used by different userspace programs to inject packets or to decode sniffed packets. It should therefore be available to them as userspace header. Also other components in the kernel (like the flow dissector) require access to the packet definitions to be able to decode ETH_P_BATMAN ethernet packets. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15batman-adv: Add kernel-doc to externally visible functionsSven Eckelmann1-0/+29
According to the kernel-doc documentation, externally visible functions should be documented. This refers to all all non-static function which can (and will) be used by functions in other sources files. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-15batman-adv: Use parentheses in function kernel-docSven Eckelmann1-12/+12
The documentation describing kernel-doc comments for functions ("How to format kernel-doc comments") uses parentheses at the end of the function name. Using this format allows to use a consistent style when adding documentation to a function and when referencing this function in a different kernel-doc section. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-15batman-adv: Add SPDX license identifier above copyright headerSven Eckelmann1-0/+1
The "Linux kernel licensing rules" require that each file has a SPDX license identifier as first line (and sometimes as second line). The FSFE REUSE practices [1] would also require the same tags but have no restrictions on the placement in the source file. Using the "Linux kernel licensing rules" is therefore also fulfilling the FSFE REUSE practices requirements at the same time. [1] https://reuse.software/practices/ Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-09-28batman-adv: Remove unnecessary parenthesesSven Eckelmann1-3/+3
checkpatch introduced with commit 63b7c73ec86b ("checkpatch: add --strict check for ifs with unnecessary parentheses") an additional test which identifies some unnecessary parentheses. Remove these unnecessary parentheses to avoid the warnings and to unify the coding style slightly more. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
The conflicts were two cases of overlapping changes in batman-adv and the qed driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-23batman-adv: Print correct function names in dbg messagesSven Eckelmann1-2/+2
The function names in batman-adv changed slightly in the past. But some of the debug messages were not updated correctly and therefore some messages were incorrect. To avoid this in the future, these kind of messages should use __func__ to automatically print the correct function name. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-05-19batman-adv: fix memory leak when dropping packet from other gatewayAndreas Pape1-1/+1
The skb must be released in the receive handler since b91a2543b4c1 ("batman-adv: Consume skb in receive handlers"). Just returning NET_RX_DROP will no longer automatically free the memory. This results in memory leaks when unicast packets from other backbones must be dropped because they share a common backbone. Fixes: 9e794b6bf4a2 ("batman-adv: drop unicast packets from other backbone gw") Signed-off-by: Andreas Pape <apape@phoenixcontact.com> [sven@narfation.org: adjust commit message] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-03-22batman-adv: changed debug messages for easier bla debuggingAndreas Pape1-1/+1
Some of the bla debug messages are extended and additional messages are added for easier bla debugging. Some debug messages introduced with the dat changes in prior patches of this patch series have been changed to be more compliant to other existing debug messages. Acked-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Andreas Pape <apape@phoenixcontact.com> [sven@narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-03-22batman-adv: drop unicast packets from other backbone gwAndreas Pape1-3/+22
Additional dropping of unicast packets received from another backbone gw if the same backbone network before being forwarded to the same backbone again is necessary. It was observed in a test setup that in rare cases these frames lead to looping unicast traffic backbone->mesh->backbone. Signed-off-by: Andreas Pape <apape@phoenixcontact.com> Acked-by: Simon Wunderlich <sw@simonwunderlich.de> [sven@narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-01-26batman-adv: Remove one condition check in batadv_route_unicast_packetGao Feng1-5/+4
It could decrease one condition check to collect some statements in the first condition block. Signed-off-by: Gao Feng <gfree.wind@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-01-26batman-adv: update copyright years for 2017Sven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-11-08batman-adv: Reject unicast packet with zero/mcast dst addressSven Eckelmann1-4/+4
An unicast batman-adv packet cannot be transmitted to a multicast or zero mac address. So reject incoming packets which still have these classes of addresses as destination mac address in the outer ethernet header. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-11-08batman-adv: Disallow zero and mcast src address for mgmt framesSven Eckelmann1-2/+2
The routing check for management frames is validating the source mac address in the outer ethernet header. It rejects every source mac address which is a broadcast address. But it also has to reject the zero-mac address and multicast mac addresses. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-11-08batman-adv: Disallow mcast src address for data framesSven Eckelmann1-6/+6
The routing checks are validating the source mac address of the outer ethernet header. They reject every source mac address which is a broadcast address. But they also have to reject any multicast mac addresses. Signed-off-by: Sven Eckelmann <sven@narfation.org> [sw@simonwunderlich.de: fix commit message typo] Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-11-08batman-adv: Consume skb in receive handlersSven Eckelmann1-49/+100
Receiving functions in Linux consume the supplied skbuff. Doing the same in the batadv_rx_handler functions makes the behavior more similar to the rest of the Linux network code. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-30batman-adv: Consume skb in batadv_send_skb_to_origSven Eckelmann1-9/+2
Sending functions in Linux consume the supplied skbuff. Doing the same in batadv_send_skb_to_orig avoids the hack of returning -1 (-EPERM) to signal the caller that he is responsible for cleaning up the skb. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-30batman-adv: Simple (re)broadcast avoidanceLinus Lüssing1-1/+1
With this patch, (re)broadcasting on a specific interfaces is avoided: * No neighbor: There is no need to broadcast on an interface if there is no node behind it. * Single neighbor is source: If there is just one neighbor on an interface and if this neighbor is the one we actually got this broadcast packet from, then we do not need to echo it back. * Single neighbor is originator: If there is just one neighbor on an interface and if this neighbor is the originator of this broadcast packet, then we do not need to echo it back. Goodies for BATMAN V: ("Upgrade your BATMAN IV network to V now to get these for free!") Thanks to the split of OGMv1 into two packet types, OGMv2 and ELP that is, we can now apply the same optimizations stated above to OGMv2 packets, too. Furthermore, with BATMAN V, rebroadcasts can be reduced in certain multi interface cases, too, where BATMAN IV cannot. This is thanks to the removal of the "secondary interface originator" concept in BATMAN V. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+27
2016-08-26batman-adv: Add missing refcnt for last_candidateSven Eckelmann1-1/+27
batadv_find_router dereferences last_bonding_candidate from orig_node without making sure that it has a valid reference. This reference has to be retrieved by increasing the reference counter while holding neigh_list_lock. The lock is required to avoid that batadv_last_bonding_replace removes the current last_bonding_candidate, reduces the reference counter and maybe destroys the object in this process. Fixes: f3b3d9018975 ("batman-adv: add bonding again") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09batman-adv: Fix consistency of update route messagesSven Eckelmann1-26/+17
The debug messages of _batadv_update_route were printed before the actual route change is done. At this point it is not really known which curr_router will be replaced. Thus the messages could print the wrong operation. Printing the debug messages after the operation was done avoids this problem. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-13/+39
Just several instances of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05batman-adv: Fix reference leak in batadv_find_routerSven Eckelmann1-13/+39
The replacement of last_bonding_candidate in batadv_orig_node has to be an atomic operation. Otherwise it is possible that the reference counter of a batadv_orig_ifinfo is reduced which was no longer the last_bonding_candidate when the new candidate is added. This can either lead to an invalid memory access or to reference leaks which make it impossible to an interface which was added to batman-adv. Fixes: f3b3d9018975 ("batman-adv: add bonding again") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-05Merge tag 'batadv-next-for-davem-20160704' of ↵David S. Miller1-15/+28
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This feature patchset includes the following changes: - Cleanup work by Markus Pargmann and Sven Eckelmann (six patches) - Initial Netlink support by Matthias Schiffer (two patches) - Throughput Meter implementation by Antonio Quartulli, a kernel-space traffic generator to estimate link speeds. This feature is useful on low-end WiFi APs where running iperf or netperf from userspace gives wrong results due to heavy userspace/kernelspace overhead. (two patches) - API clean-up work by Antonio Quartulli (one patch) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04batman-adv: split routing API data structure in subobjectsAntonio Quartulli1-4/+4
The routing API data structure contains several function pointers that can easily be grouped together based on the component they work with. Split the API in subobjects in order to improve definition readability. At the same time, remove the "bat_" prefix from the API object and its fields names. These are batman-adv private structs and there is no need to always prepend such prefix, which only makes function invocations much much longer. Signed-off-by: Antonio Quartulli <a@unstable.cc> Reviewed-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-04batman-adv: throughput meter implementationAntonio Quartulli1-0/+8
The throughput meter module is a simple, kernel-space replacement for throughtput measurements tool like iperf and netperf. It is intended to approximate TCP behaviour. It is invoked through batctl: the protocol is connection oriented, with cumulative acknowledgment and a dynamic-size sliding window. The test *can* be interrupted by batctl. A receiver side timeout avoids unlimited waitings for sender packets: after one second of inactivity, the receiver abort the ongoing test. Based on a prototype from Edo Monticelli <montik@autistici.org> Signed-off-by: Antonio Quartulli <antonio.quartulli@open-mesh.com> Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-04batman-adv: return netdev status in the TX pathAntonio Quartulli1-11/+14
Return the proper netdev TX status along the TX path so that the tp_meter can understand when the queue is full and should stop sending packets. Signed-off-by: Antonio Quartulli <antonio.quartulli@open-mesh.com> Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-02Merge tag 'batadv-next-for-davem-20160701' of ↵David S. Miller1-0/+2
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This feature patchset includes the following changes: - two patches with minimal clean up work by Antonio Quartulli and Simon Wunderlich - eight patches of B.A.T.M.A.N. V, API and documentation clean up work, by Antonio Quartulli and Marek Lindner - Andrew Lunn fixed the skb priority adoption when forwarding fragmented packets (two patches) - Multicast optimization support is now enabled for bridges which comes with some protocol updates, by Linus Luessing ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Several cases of overlapping changes, except the packet scheduler conflicts which deal with the addition of the free list parameter to qdisc_enqueue(). Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30batman-adv: Fix bat_(iv|v) function declaration headerSven Eckelmann1-1/+0
The bat_algo.h had some functions declared which were not part of the bat_algo.c file. These are instead stored in bat_v.c and bat_iv_ogm.c. The declaration should therefore be also in bat_v.h and bat_iv_ogm,h to make them easier to find. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: Consolidate logging related functionsSven Eckelmann1-0/+1
There are several places in batman-adv which provide logging related functions. These should be grouped together in the log.* files to make them easier to find. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: move bat_algo functions into a separate fileSven Eckelmann1-0/+1
The bat_algo functionality in main.c is mostly unrelated to the rest of the content. It still takes up a large portion of this source file (~15%, 103 lines). Moving it to a separate file makes it better visible as a main component of the batman-adv implementation and hides it less in the other helper functions in main.c. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: split tvlv into a separate fileMarkus Pargmann1-0/+1
The tvlv functionality in main.c is mostly unrelated to the rest of the content. It still takes up a large portion of this source file (~45%, 588 lines). Moving it to a separate file makes it better visible as a main component of the batman-adv implementation and hides it less in the other helper functions in main.c Signed-off-by: Markus Pargmann <mpa@pengutronix.de> [sven@narfation.org: fix conflicts with current version, fix includes, rewrote commit message] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: Include frame priority in fragment headerAndrew Lunn1-0/+2
Unfragmented frames which traverse a node have their skb->priority set by looking at the IP ToS byte, or the 802.1p header. However for fragments this is not possible, only one of the fragments will contain the headers. Instead, place the priority into the fragment header and on receiving a fragment, use this information to set the skb->priority for when the fragment is forwarded. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-29batman-adv: Fix ICMP RR ethernet access after skb_linearizeSven Eckelmann1-0/+1
The skb_linearize may reallocate the skb. This makes the calculated pointer for ethhdr invalid. But it the pointer is used later to fill in the RR field of the batadv_icmp_packet_rr packet. Instead re-evaluate eth_hdr after the skb_linearize+skb_cow to fix the pointer and avoid the invalid read. Fixes: da6b8c20a5b8 ("batman-adv: generalize batman-adv icmp packet handling") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-13sched: remove NET_XMIT_POLICEDFlorian Westphal1-1/+1
sch_atm returns this when TC_ACT_SHOT classification occurs. But all other schedulers that use tc_classify (htb, hfsc, drr, fq_codel ...) return NET_XMIT_SUCCESS | __BYPASS in this case so just do that in atm. BATMAN uses it as an intermediate return value to signal forwarding vs. buffering, but it did not return POLICED to callers outside of BATMAN. Reviewed-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-18batman-adv: fix skb deref after freeFlorian Westphal1-1/+3
batadv_send_skb_to_orig() calls dev_queue_xmit() so we can't use skb->len. Fixes: 953324776d6d ("batman-adv: network coding - buffer unicast packets before forward") Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use bool as return type for boolean functionsSven Eckelmann1-18/+19
It is easier to understand that the returned value of a specific function doesn't have to be 0 when the functions was successful when the actual return type is bool. This is especially true when all surrounding functions with return type int use negative values to return the error code. Reported-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use kref_get for _batadv_update_routeSven Eckelmann1-4/+4
_batadv_update_route requires that the caller already has a valid reference for neigh_node. It is therefore not possible that it has an reference counter of 0 and was still given to this function The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Remove unused parameter recv_if of batadv_interface_rxSven Eckelmann1-3/+2
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-24batman-adv: Reduce refcnt of removed router when updating routeSven Eckelmann1-0/+9
_batadv_update_route rcu_derefences orig_ifinfo->router outside of a spinlock protected region to print some information messages to the debug log. But this pointer is not checked again when the new pointer is assigned in the spinlock protected region. Thus is can happen that the value of orig_ifinfo->router changed in the meantime and thus the reference counter of the wrong router gets reduced after the spinlock protected region. Just rcu_dereferencing the value of orig_ifinfo->router inside the spinlock protected region (which also set the new pointer) is enough to get the correct old router object. Fixes: e1a5382f978b ("batman-adv: Make orig_node->router an rcu protected pointer") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_orig_ifinfo *_free_ref function to *_putSven Eckelmann1-4/+4
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_neigh_node *_free_ref function to *_putSven Eckelmann1-7/+7
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_hardif *_free_ref function to *_putSven Eckelmann1-4/+4
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_orig_node *_free_ref function to *_putSven Eckelmann1-9/+9
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10batman-adv: Convert batadv_neigh_node to krefSven Eckelmann1-4/+4
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>