summaryrefslogtreecommitdiff
path: root/net/bluetooth
AgeCommit message (Collapse)AuthorFilesLines
2023-01-18Bluetooth: Fix possible deadlock in rfcomm_sk_state_changeYing Hsu1-1/+6
syzbot reports a possible deadlock in rfcomm_sk_state_change [1]. While rfcomm_sock_connect acquires the sk lock and waits for the rfcomm lock, rfcomm_sock_release could have the rfcomm lock and hit a deadlock for acquiring the sk lock. Here's a simplified flow: rfcomm_sock_connect: lock_sock(sk) rfcomm_dlc_open: rfcomm_lock() rfcomm_sock_release: rfcomm_sock_shutdown: rfcomm_lock() __rfcomm_dlc_close: rfcomm_k_state_change: lock_sock(sk) This patch drops the sk lock before calling rfcomm_dlc_open to avoid the possible deadlock and holds sk's reference count to prevent use-after-free after rfcomm_dlc_open completes. Reported-by: syzbot+d7ce59...@syzkaller.appspotmail.com Fixes: 1804fdf6e494 ("Bluetooth: btintel: Combine setting up MSFT extension") Link: https://syzkaller.appspot.com/bug?extid=d7ce59b06b3eb14fd218 [1] Signed-off-by: Ying Hsu <yinghsu@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-01-18Bluetooth: ISO: Fix possible circular locking dependencyLuiz Augusto von Dentz1-3/+0
This attempts to fix the following trace: iso-tester/52 is trying to acquire lock: ffff8880024e0070 (&hdev->lock){+.+.}-{3:3}, at: iso_sock_listen+0x29e/0x440 but task is already holding lock: ffff888001978130 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}, at: iso_sock_listen+0x8b/0x440 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}: lock_acquire+0x176/0x3d0 lock_sock_nested+0x32/0x80 iso_connect_cfm+0x1a3/0x630 hci_cc_le_setup_iso_path+0x195/0x340 hci_cmd_complete_evt+0x1ae/0x500 hci_event_packet+0x38e/0x7c0 hci_rx_work+0x34c/0x980 process_one_work+0x5a5/0x9a0 worker_thread+0x89/0x6f0 kthread+0x14e/0x180 ret_from_fork+0x22/0x30 -> #1 (hci_cb_list_lock){+.+.}-{3:3}: lock_acquire+0x176/0x3d0 __mutex_lock+0x13b/0xf50 hci_le_remote_feat_complete_evt+0x17e/0x320 hci_event_packet+0x38e/0x7c0 hci_rx_work+0x34c/0x980 process_one_work+0x5a5/0x9a0 worker_thread+0x89/0x6f0 kthread+0x14e/0x180 ret_from_fork+0x22/0x30 -> #0 (&hdev->lock){+.+.}-{3:3}: check_prev_add+0xfc/0x1190 __lock_acquire+0x1e27/0x2750 lock_acquire+0x176/0x3d0 __mutex_lock+0x13b/0xf50 iso_sock_listen+0x29e/0x440 __sys_listen+0xe6/0x160 __x64_sys_listen+0x25/0x30 do_syscall_64+0x42/0x90 entry_SYSCALL_64_after_hwframe+0x62/0xcc other info that might help us debug this: Chain exists of: &hdev->lock --> hci_cb_list_lock --> sk_lock-AF_BLUETOOTH-BTPROTO_ISO Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO); lock(hci_cb_list_lock); lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO); lock(&hdev->lock); *** DEADLOCK *** 1 lock held by iso-tester/52: #0: ffff888001978130 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}, at: iso_sock_listen+0x8b/0x440 Fixes: f764a6c2c1e4 ("Bluetooth: ISO: Add broadcast support") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-01-18Bluetooth: hci_event: Fix Invalid wait contextLuiz Augusto von Dentz1-1/+4
This fixes the following trace caused by attempting to lock cmd_sync_work_lock while holding the rcu_read_lock: kworker/u3:2/212 is trying to lock: ffff888002600910 (&hdev->cmd_sync_work_lock){+.+.}-{3:3}, at: hci_cmd_sync_queue+0xad/0x140 other info that might help us debug this: context-{4:4} 4 locks held by kworker/u3:2/212: #0: ffff8880028c6530 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work+0x4dc/0x9a0 #1: ffff888001aafde0 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_one_work+0x4dc/0x9a0 #2: ffff888002600070 (&hdev->lock){+.+.}-{3:3}, at: hci_cc_le_set_cig_params+0x64/0x4f0 #3: ffffffffa5994b00 (rcu_read_lock){....}-{1:2}, at: hci_cc_le_set_cig_params+0x2f9/0x4f0 Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-01-18Bluetooth: ISO: Fix possible circular locking dependencyLuiz Augusto von Dentz1-35/+26
This attempts to fix the following trace: kworker/u3:1/184 is trying to acquire lock: ffff888001888130 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}, at: iso_connect_cfm+0x2de/0x690 but task is already holding lock: ffff8880028d1c20 (&conn->lock){+.+.}-{2:2}, at: iso_connect_cfm+0x265/0x690 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&conn->lock){+.+.}-{2:2}: lock_acquire+0x176/0x3d0 _raw_spin_lock+0x2a/0x40 __iso_sock_close+0x1dd/0x4f0 iso_sock_release+0xa0/0x1b0 sock_close+0x5e/0x120 __fput+0x102/0x410 task_work_run+0xf1/0x160 exit_to_user_mode_prepare+0x170/0x180 syscall_exit_to_user_mode+0x19/0x50 do_syscall_64+0x4e/0x90 entry_SYSCALL_64_after_hwframe+0x62/0xcc -> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}: check_prev_add+0xfc/0x1190 __lock_acquire+0x1e27/0x2750 lock_acquire+0x176/0x3d0 lock_sock_nested+0x32/0x80 iso_connect_cfm+0x2de/0x690 hci_cc_le_setup_iso_path+0x195/0x340 hci_cmd_complete_evt+0x1ae/0x500 hci_event_packet+0x38e/0x7c0 hci_rx_work+0x34c/0x980 process_one_work+0x5a5/0x9a0 worker_thread+0x89/0x6f0 kthread+0x14e/0x180 ret_from_fork+0x22/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&conn->lock); lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO); lock(&conn->lock); lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO); *** DEADLOCK *** Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type") Fixes: f764a6c2c1e4 ("Bluetooth: ISO: Add broadcast support") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-01-18Bluetooth: hci_sync: fix memory leak in hci_update_adv_data()Zhengchao Shao1-10/+3
When hci_cmd_sync_queue() failed in hci_update_adv_data(), inst_ptr is not freed, which will cause memory leak, convert to use ERR_PTR/PTR_ERR to pass the instance to callback so no memory needs to be allocated. Fixes: 651cd3d65b0f ("Bluetooth: convert hci_update_adv_data to hci_sync") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-01-18Bluetooth: hci_conn: Fix memory leaksZhengchao Shao1-4/+14
When hci_cmd_sync_queue() failed in hci_le_terminate_big() or hci_le_big_terminate(), the memory pointed by variable d is not freed, which will cause memory leak. Add release process to error path. Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-01-18Bluetooth: hci_sync: Fix use HCI_OP_LE_READ_BUFFER_SIZE_V2Luiz Augusto von Dentz1-3/+3
Don't try to use HCI_OP_LE_READ_BUFFER_SIZE_V2 if controller don't support ISO channels, but in order to check if ISO channels are supported HCI_OP_LE_READ_LOCAL_FEATURES needs to be done earlier so the features bits can be checked on hci_le_read_buffer_size_sync. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216817 Fixes: c1631dbc00c1 ("Bluetooth: hci_sync: Fix hci_read_buffer_size_sync") Cc: stable@vger.kernel.org # 6.1 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-01-18Bluetooth: Fix a buffer overflow in mgmt_mesh_add()Harshit Mogalapalli1-1/+1
Smatch Warning: net/bluetooth/mgmt_util.c:375 mgmt_mesh_add() error: __memcpy() 'mesh_tx->param' too small (48 vs 50) Analysis: 'mesh_tx->param' is array of size 48. This is the destination. u8 param[sizeof(struct mgmt_cp_mesh_send) + 29]; // 19 + 29 = 48. But in the caller 'mesh_send' we reject only when len > 50. len > (MGMT_MESH_SEND_SIZE + 31) // 19 + 31 = 50. Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-14Merge tag 'net-next-6.2' of ↵Linus Torvalds11-54/+102
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations - Add inet drop monitor support - A few GRO performance improvements - Add infrastructure for atomic dev stats, addressing long standing data races - De-duplicate common code between OVS and conntrack offloading infrastructure - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs - Add the helper support for connection-tracking OVS offload BPF: - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF - Make cgroup local storage available to non-cgroup attached BPF programs - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers - A relevant bunch of BPF verifier fixes and improvements - Veristat tool improvements to support custom filtering, sorting, and replay of results - Add LLVM disassembler as default library for dumping JITed code - Lots of new BPF documentation for various BPF maps - Add bpf_rcu_read_{,un}lock() support for sleepable programs - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs - Add support storing struct task_struct objects as kptrs in maps - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions Protocols: - TCP: implement Protective Load Balancing across switch links - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path - UDP: Introduce optional per-netns hash lookup table - IPv6: simplify and cleanup sockets disposal - Netlink: support different type policies for each generic netlink operation - MPTCP: add MSG_FASTOPEN and FastOpen listener side support - MPTCP: add netlink notification support for listener sockets events - SCTP: add VRF support, allowing sctp sockets binding to VRF devices - Add bridging MAC Authentication Bypass (MAB) support - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading - IPSec: extended ack support for more descriptive XFRM error reporting - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks - Tun: bump the link speed from 10Mbps to 10Gbps - Tun/VirtioNet: implement UDP segmentation offload support Driver API: - PHY/SFP: improve power level switching between standard level 1 and the higher power levels - New API for netdev <-> devlink_port linkage - PTP: convert existing drivers to new frequency adjustment implementation - DSA: add support for rx offloading - Autoload DSA tagging driver when dynamically changing protocol - Add new PCP and APPTRUST attributes to Data Center Bridging - Add configuration support for 800Gbps link speed - Add devlink port function attribute to enable/disable RoCE and migratable - Extend devlink-rate to support strict prioriry and weighted fair queuing - Add devlink support to directly reading from region memory - New device tree helper to fetch MAC address from nvmem - New big TCP helper to simplify temporary header stripping New hardware / drivers: - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches - Marvel Prestera AC5X Ethernet Switch - WangXun 10 Gigabit NIC - Motorcomm yt8521 Gigabit Ethernet - Microchip ksz9563 Gigabit Ethernet Switch - Microsoft Azure Network Adapter - Linux Automation 10Base-T1L adapter - PHY: - Aquantia AQR112 and AQR412 - Motorcomm YT8531S - PTP: - Orolia ART-CARD - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets - Realtek RTL8852BE and RTL8723DS - Cypress.CYW4373A0 WiFi + Bluetooth combo device Drivers: - CAN: - gs_usb: bus error reporting support - kvaser_usb: listen only and bus error reporting support - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping - implement devlink-rate support - support direct read from memory - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate - Support for enhanced events compression - extend H/W offload packet manipulation capabilities - implement IPSec packet offload mode - nVidia/Mellanox (mlx4): - better big TCP support - Netronome Ethernet NICs (nfp): - IPsec offload support - add support for multicast filter - Broadcom: - RSS and PTP support improvements - AMD/SolarFlare: - netlink extened ack improvements - add basic flower matches to offload, and related stats - Virtual NICs: - ibmvnic: introduce affinity hint support - small / embedded: - FreeScale fec: add initial XDP support - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood - TI am65-cpsw: add suspend/resume support - Mediatek MT7986: add RX wireless wthernet dispatch support - Realtek 8169: enable GRO software interrupt coalescing per default - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support - add ip6gre support - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support - enable flow offload support - Renesas: - add rswitch R-Car Gen4 gPTP support - Microchip (lan966x): - add full XDP support - add TC H/W offload via VCAP - enable PTP on bridge interfaces - Microchip (ksz8): - add MTU support for KSZ8 series - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support - add ack signal support - enable coredump support - remain_on_channel support - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support - RealTek WiFi (rtw89): - new dynamic header firmware format support - wake-over-WLAN support" * tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits) ipvs: fix type warning in do_div() on 32 bit net: lan966x: Remove a useless test in lan966x_ptp_add_trap() net: ipa: add IPA v4.7 support dt-bindings: net: qcom,ipa: Add SM6350 compatible bnxt: Use generic HBH removal helper in tx path IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver selftests: forwarding: Add bridge MDB test selftests: forwarding: Rename bridge_mdb test bridge: mcast: Support replacement of MDB port group entries bridge: mcast: Allow user space to specify MDB entry routing protocol bridge: mcast: Allow user space to add (*, G) with a source list and filter mode bridge: mcast: Add support for (*, G) with a source list and filter mode bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source bridge: mcast: Add a flag for user installed source entries bridge: mcast: Expose __br_multicast_del_group_src() bridge: mcast: Expose br_multicast_new_group_src() bridge: mcast: Add a centralized error path bridge: mcast: Place netlink policy before validation functions bridge: mcast: Split (*, G) and (S, G) addition into different functions bridge: mcast: Do not derive entry type from its filter mode ...
2022-12-13Merge tag 'pull-iov_iter' of ↵Linus Torvalds3-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull iov_iter updates from Al Viro: "iov_iter work; most of that is about getting rid of direction misannotations and (hopefully) preventing more of the same for the future" * tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: use less confusing names for iov_iter direction initializers iov_iter: saner checks for attempt to copy to/from iterator [xen] fix "direction" argument of iov_iter_kvec() [vhost] fix 'direction' argument of iov_iter_{init,bvec}() [target] fix iov_iter_bvec() "direction" argument [s390] memcpy_real(): WRITE is "data source", not destination... [s390] zcore: WRITE is "data source", not destination... [infiniband] READ is "data destination", not source... [fsi] WRITE is "data source", not destination... [s390] copy_oldmem_kernel() - WRITE is "data source", not destination csum_and_copy_to_iter(): handle ITER_DISCARD get rid of unlikely() on page_copy_sane() calls
2022-12-13Merge tag 'random-6.2-rc1-for-linus' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull random number generator updates from Jason Donenfeld: - Replace prandom_u32_max() and various open-coded variants of it, there is now a new family of functions that uses fast rejection sampling to choose properly uniformly random numbers within an interval: get_random_u32_below(ceil) - [0, ceil) get_random_u32_above(floor) - (floor, U32_MAX] get_random_u32_inclusive(floor, ceil) - [floor, ceil] Coccinelle was used to convert all current users of prandom_u32_max(), as well as many open-coded patterns, resulting in improvements throughout the tree. I'll have a "late" 6.1-rc1 pull for you that removes the now unused prandom_u32_max() function, just in case any other trees add a new use case of it that needs to converted. According to linux-next, there may be two trivial cases of prandom_u32_max() reintroductions that are fixable with a 's/.../.../'. So I'll have for you a final conversion patch doing that alongside the removal patch during the second week. This is a treewide change that touches many files throughout. - More consistent use of get_random_canary(). - Updates to comments, documentation, tests, headers, and simplification in configuration. - The arch_get_random*_early() abstraction was only used by arm64 and wasn't entirely useful, so this has been replaced by code that works in all relevant contexts. - The kernel will use and manage random seeds in non-volatile EFI variables, refreshing a variable with a fresh seed when the RNG is initialized. The RNG GUID namespace is then hidden from efivarfs to prevent accidental leakage. These changes are split into random.c infrastructure code used in the EFI subsystem, in this pull request, and related support inside of EFISTUB, in Ard's EFI tree. These are co-dependent for full functionality, but the order of merging doesn't matter. - Part of the infrastructure added for the EFI support is also used for an improvement to the way vsprintf initializes its siphash key, replacing an sleep loop wart. - The hardware RNG framework now always calls its correct random.c input function, add_hwgenerator_randomness(), rather than sometimes going through helpers better suited for other cases. - The add_latent_entropy() function has long been called from the fork handler, but is a no-op when the latent entropy gcc plugin isn't used, which is fine for the purposes of latent entropy. But it was missing out on the cycle counter that was also being mixed in beside the latent entropy variable. So now, if the latent entropy gcc plugin isn't enabled, add_latent_entropy() will expand to a call to add_device_randomness(NULL, 0), which adds a cycle counter, without the absent latent entropy variable. - The RNG is now reseeded from a delayed worker, rather than on demand when used. Always running from a worker allows it to make use of the CPU RNG on platforms like S390x, whose instructions are too slow to do so from interrupts. It also has the effect of adding in new inputs more frequently with more regularity, amounting to a long term transcript of random values. Plus, it helps a bit with the upcoming vDSO implementation (which isn't yet ready for 6.2). - The jitter entropy algorithm now tries to execute on many different CPUs, round-robining, in hopes of hitting even more memory latencies and other unpredictable effects. It also will mix in a cycle counter when the entropy timer fires, in addition to being mixed in from the main loop, to account more explicitly for fluctuations in that timer firing. And the state it touches is now kept within the same cache line, so that it's assured that the different execution contexts will cause latencies. * tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits) random: include <linux/once.h> in the right header random: align entropy_timer_state to cache line random: mix in cycle counter when jitter timer fires random: spread out jitter callback to different CPUs random: remove extraneous period and add a missing one in comments efi: random: refresh non-volatile random seed when RNG is initialized vsprintf: initialize siphash key using notifier random: add back async readiness notifier random: reseed in delayed work rather than on-demand random: always mix cycle counter in add_latent_entropy() hw_random: use add_hwgenerator_randomness() for early entropy random: modernize documentation comment on get_random_bytes() random: adjust comment to account for removed function random: remove early archrandom abstraction random: use random.trust_{bootloader,cpu} command line option only stackprotector: actually use get_random_canary() stackprotector: move get_random_canary() into stackprotector.h treewide: use get_random_u32_inclusive() when possible treewide: use get_random_u32_{above,below}() instead of manual loop treewide: use get_random_u32_below() instead of deprecated function ...
2022-12-13Bluetooth: Wait for HCI_OP_WRITE_AUTH_PAYLOAD_TO to completeLuiz Augusto von Dentz1-6/+16
This make sure HCI_OP_WRITE_AUTH_PAYLOAD_TO completes before notifying the encryption change just as is done with HCI_OP_READ_ENC_KEY_SIZE. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-13Bluetooth: ISO: Avoid circular locking dependencyLuiz Augusto von Dentz1-23/+38
This attempts to avoid circular locking dependency between sock_lock and hdev_lock: WARNING: possible circular locking dependency detected 6.0.0-rc7-03728-g18dd8ab0a783 #3 Not tainted ------------------------------------------------------ kworker/u3:2/53 is trying to acquire lock: ffff888000254130 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}, at: iso_conn_del+0xbd/0x1d0 but task is already holding lock: ffffffff9f39a080 (hci_cb_list_lock){+.+.}-{3:3}, at: hci_le_cis_estabilished_evt+0x1b5/0x500 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (hci_cb_list_lock){+.+.}-{3:3}: __mutex_lock+0x10e/0xfe0 hci_le_remote_feat_complete_evt+0x17f/0x320 hci_event_packet+0x39c/0x7d0 hci_rx_work+0x2bf/0x950 process_one_work+0x569/0x980 worker_thread+0x2a3/0x6f0 kthread+0x153/0x180 ret_from_fork+0x22/0x30 -> #1 (&hdev->lock){+.+.}-{3:3}: __mutex_lock+0x10e/0xfe0 iso_connect_cis+0x6f/0x5a0 iso_sock_connect+0x1af/0x710 __sys_connect+0x17e/0x1b0 __x64_sys_connect+0x37/0x50 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x62/0xcc -> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}: __lock_acquire+0x1b51/0x33d0 lock_acquire+0x16f/0x3b0 lock_sock_nested+0x32/0x80 iso_conn_del+0xbd/0x1d0 iso_connect_cfm+0x226/0x680 hci_le_cis_estabilished_evt+0x1ed/0x500 hci_event_packet+0x39c/0x7d0 hci_rx_work+0x2bf/0x950 process_one_work+0x569/0x980 worker_thread+0x2a3/0x6f0 kthread+0x153/0x180 ret_from_fork+0x22/0x30 other info that might help us debug this: Chain exists of: sk_lock-AF_BLUETOOTH-BTPROTO_ISO --> &hdev->lock --> hci_cb_list_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(hci_cb_list_lock); lock(&hdev->lock); lock(hci_cb_list_lock); lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO); *** DEADLOCK *** 4 locks held by kworker/u3:2/53: #0: ffff8880021d9130 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work+0x4ad/0x980 #1: ffff888002387de0 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_one_work+0x4ad/0x980 #2: ffff888001ac0070 (&hdev->lock){+.+.}-{3:3}, at: hci_le_cis_estabilished_evt+0xc3/0x500 #3: ffffffff9f39a080 (hci_cb_list_lock){+.+.}-{3:3}, at: hci_le_cis_estabilished_evt+0x1b5/0x500 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-13Bluetooth: RFCOMM: don't call kfree_skb() under spin_lock_irqsave()Yang Yingliang1-1/+1
It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: 81be03e026dc ("Bluetooth: RFCOMM: Replace use of memcpy_from_msg with bt_skb_sendmmsg") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-13Bluetooth: hci_core: don't call kfree_skb() under spin_lock_irqsave()Yang Yingliang1-1/+1
It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: 9238f36a5a50 ("Bluetooth: Add request cmd_complete and cmd_status functions") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-13Bluetooth: hci_conn: Fix crash on hci_create_cis_syncLuiz Augusto von Dentz1-1/+1
When attempting to connect multiple ISO sockets without using DEFER_SETUP may result in the following crash: BUG: KASAN: null-ptr-deref in hci_create_cis_sync+0x18b/0x2b0 Read of size 2 at addr 0000000000000036 by task kworker/u3:1/50 CPU: 0 PID: 50 Comm: kworker/u3:1 Not tainted 6.0.0-rc7-02243-gb84a13ff4eda #4373 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl+0x19/0x27 kasan_report+0xbc/0xf0 ? hci_create_cis_sync+0x18b/0x2b0 hci_create_cis_sync+0x18b/0x2b0 ? get_link_mode+0xd0/0xd0 ? __ww_mutex_lock_slowpath+0x10/0x10 ? mutex_lock+0xe0/0xe0 ? get_link_mode+0xd0/0xd0 hci_cmd_sync_work+0x111/0x190 process_one_work+0x427/0x650 worker_thread+0x87/0x750 ? process_one_work+0x650/0x650 kthread+0x14e/0x180 ? kthread_exit+0x50/0x50 ret_from_fork+0x22/0x30 </TASK> Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-13Bluetooth: Add quirk to disable MWS Transport ConfigurationSven Peter1-1/+1
Broadcom 4378/4387 controllers found in Apple Silicon Macs claim to support getting MWS Transport Layer Configuration, < HCI Command: Read Local Supported... (0x04|0x0002) plen 0 > HCI Event: Command Complete (0x0e) plen 68 Read Local Supported Commands (0x04|0x0002) ncmd 1 Status: Success (0x00) [...] Get MWS Transport Layer Configuration (Octet 30 - Bit 3)] [...] , but then don't actually allow the required command: > HCI Event: Command Complete (0x0e) plen 15 Get MWS Transport Layer Configuration (0x05|0x000c) ncmd 1 Status: Command Disallowed (0x0c) Number of transports: 0 Baud rate list: 0 entries 00 00 00 00 00 00 00 00 00 00 Signed-off-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-13Bluetooth: hci_event: Ignore reserved bits in LE Extended Adv ReportSven Peter1-1/+1
Broadcom controllers present on Apple Silicon devices use the upper 8 bits of the event type in the LE Extended Advertising Report for the channel on which the frame has been received. These bits are reserved according to the Bluetooth spec anyway such that we can just drop them to ensure that the advertising results are parsed correctly. The following excerpt from a btmon trace shows a report received on channel 37 by these controllers: > HCI Event: LE Meta Event (0x3e) plen 55 LE Extended Advertising Report (0x0d) Num reports: 1 Entry 0 Event type: 0x2513 Props: 0x0013 Connectable Scannable Use legacy advertising PDUs Data status: Complete Reserved (0x2500) Legacy PDU Type: Reserved (0x2513) Address type: Public (0x00) Address: XX:XX:XX:XX:XX:XX (Shenzhen Jingxun Software [...]) Primary PHY: LE 1M Secondary PHY: No packets SID: no ADI field (0xff) TX power: 127 dBm RSSI: -76 dBm (0xb4) Periodic advertising interval: 0.00 msec (0x0000) Direct address type: Public (0x00) Direct address: 00:00:00:00:00:00 (OUI 00-00-00) Data length: 0x1d [...] Flags: 0x18 Simultaneous LE and BR/EDR (Controller) Simultaneous LE and BR/EDR (Host) Company: Harman International Industries, Inc. (87) Data: [...] Service Data (UUID 0xfddf): Name (complete): JBL Flip 5 Signed-off-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-13Bluetooth: Use kzalloc instead of kmalloc/memsetKang Minchul1-4/+2
Replace kmalloc+memset by kzalloc for better readability and simplicity. This addresses the cocci warning below: WARNING: kzalloc should be used for d, instead of kmalloc/memset Signed-off-by: Kang Minchul <tegongkang@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-13Bluetooth: Fix EALREADY and ELOOP cases in bt_status()Christophe JAILLET1-2/+2
'err' is known to be <0 at this point. So, some cases can not be reached because of a missing "-". Add it. Fixes: ca2045e059c3 ("Bluetooth: Add bt_status") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-13Bluetooth: Add CONFIG_BT_LE_L2CAP_ECREDLuiz Augusto von Dentz2-1/+12
This adds CONFIG_BT_LE_L2CAP_ECRED which can be used to enable L2CAP Enhanced Credit Flow Control Mode by default, previously it was only possible to set it via module parameter (e.g. bluetooth.enable_ecred=1). Since L2CAP ECRED mode is required by the likes of EATT which is recommended for LE Audio this enables it by default. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-By: Tedd Ho-Jeong An <tedd.an@intel.com>
2022-12-13Bluetooth: MGMT: Fix error report for ADD_EXT_ADV_PARAMSInga Stotland1-1/+1
When validating the parameter length for MGMT_OP_ADD_EXT_ADV_PARAMS command, use the correct op code in error status report: was MGMT_OP_ADD_ADVERTISING, changed to MGMT_OP_ADD_EXT_ADV_PARAMS. Fixes: 12410572833a2 ("Bluetooth: Break add adv into two mgmt commands") Signed-off-by: Inga Stotland <inga.stotland@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-13Bluetooth: hci_core: fix error handling in hci_register_dev()Yang Yingliang1-1/+1
If hci_register_suspend_notifier() returns error, the hdev and rfkill are leaked. We could disregard the error and print a warning message instead to avoid leaks, as it just means we won't be handing suspend requests. Fixes: 9952d90ea288 ("Bluetooth: Handle PM_SUSPEND_PREPARE and PM_POST_SUSPEND") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-13Bluetooth: Use kzalloc instead of kmalloc/memsetJiapeng Chong1-2/+1
Use kzalloc rather than duplicating its implementation, which makes code simple and easy to understand. ./net/bluetooth/hci_conn.c:2038:6-13: WARNING: kzalloc should be used for cp, instead of kmalloc/memset. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2406 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-13Bluetooth: hci_conn: use HCI dst_type values also for BISPauli Virtanen2-8/+4
For ISO BIS related functions in hci_conn.c, make dst_type values be HCI address type values, not ISO socket address type values. This makes it consistent with CIS functions. Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-13Bluetooth: hci_sync: cancel cmd_timer if hci_open failedArchie Pusaka1-0/+1
If a command is already sent, we take care of freeing it, but we also need to cancel the timeout as well. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-13Bluetooth: hci_sync: Fix not able to set force_static_addressLuiz Augusto von Dentz1-1/+1
force_static_address shall be writable while hdev is initing but is not considered powered yet since the static address is written only when powered. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Brian Gix <brian.gix@intel.com>
2022-12-13Bluetooth: hci_sync: Fix not setting static addressLuiz Augusto von Dentz1-0/+18
This attempts to program the address stored in hdev->static_addr after the init sequence has been complete: @ MGMT Command: Set Static A.. (0x002b) plen 6 Address: C0:55:44:33:22:11 (Static) @ MGMT Event: Command Complete (0x0001) plen 7 Set Static Address (0x002b) plen 4 Status: Success (0x00) Current settings: 0x00008200 Low Energy Static Address @ MGMT Event: New Settings (0x0006) plen 4 Current settings: 0x00008200 Low Energy Static Address < HCI Command: LE Set Random.. (0x08|0x0005) plen 6 Address: C0:55:44:33:22:11 (Static) > HCI Event: Command Complete (0x0e) plen 4 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 7 Set Powered (0x0005) plen 4 Status: Success (0x00) Current settings: 0x00008201 Powered Low Energy Static Address @ MGMT Event: New Settings (0x0006) plen 4 Current settings: 0x00008201 Powered Low Energy Static Address Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Brian Gix <brian.gix@intel.com>
2022-12-03Bluetooth: Fix crash when replugging CSR fake controllersLuiz Augusto von Dentz1-2/+6
It seems fake CSR 5.0 clones can cause the suspend notifier to be registered twice causing the following kernel panic: [ 71.986122] Call Trace: [ 71.986124] <TASK> [ 71.986125] blocking_notifier_chain_register+0x33/0x60 [ 71.986130] hci_register_dev+0x316/0x3d0 [bluetooth 99b5497ea3d09708fa1366c1dc03288bf3cca8da] [ 71.986154] btusb_probe+0x979/0xd85 [btusb e1e0605a4f4c01984a4b9c8ac58c3666ae287477] [ 71.986159] ? __pm_runtime_set_status+0x1a9/0x300 [ 71.986162] ? ktime_get_mono_fast_ns+0x3e/0x90 [ 71.986167] usb_probe_interface+0xe3/0x2b0 [ 71.986171] really_probe+0xdb/0x380 [ 71.986174] ? pm_runtime_barrier+0x54/0x90 [ 71.986177] __driver_probe_device+0x78/0x170 [ 71.986180] driver_probe_device+0x1f/0x90 [ 71.986183] __device_attach_driver+0x89/0x110 [ 71.986186] ? driver_allows_async_probing+0x70/0x70 [ 71.986189] bus_for_each_drv+0x8c/0xe0 [ 71.986192] __device_attach+0xb2/0x1e0 [ 71.986195] bus_probe_device+0x92/0xb0 [ 71.986198] device_add+0x422/0x9a0 [ 71.986201] ? sysfs_merge_group+0xd4/0x110 [ 71.986205] usb_set_configuration+0x57a/0x820 [ 71.986208] usb_generic_driver_probe+0x4f/0x70 [ 71.986211] usb_probe_device+0x3a/0x110 [ 71.986213] really_probe+0xdb/0x380 [ 71.986216] ? pm_runtime_barrier+0x54/0x90 [ 71.986219] __driver_probe_device+0x78/0x170 [ 71.986221] driver_probe_device+0x1f/0x90 [ 71.986224] __device_attach_driver+0x89/0x110 [ 71.986227] ? driver_allows_async_probing+0x70/0x70 [ 71.986230] bus_for_each_drv+0x8c/0xe0 [ 71.986232] __device_attach+0xb2/0x1e0 [ 71.986235] bus_probe_device+0x92/0xb0 [ 71.986237] device_add+0x422/0x9a0 [ 71.986239] ? _dev_info+0x7d/0x98 [ 71.986242] ? blake2s_update+0x4c/0xc0 [ 71.986246] usb_new_device.cold+0x148/0x36d [ 71.986250] hub_event+0xa8a/0x1910 [ 71.986255] process_one_work+0x1c4/0x380 [ 71.986259] worker_thread+0x51/0x390 [ 71.986262] ? rescuer_thread+0x3b0/0x3b0 [ 71.986264] kthread+0xdb/0x110 [ 71.986266] ? kthread_complete_and_exit+0x20/0x20 [ 71.986268] ret_from_fork+0x1f/0x30 [ 71.986273] </TASK> [ 71.986274] ---[ end trace 0000000000000000 ]--- [ 71.986284] btusb: probe of 2-1.6:1.0 failed with error -17 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216683 Cc: stable@vger.kernel.org Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Leonardo Eugênio <lelgenio@disroot.org>
2022-12-03Bluetooth: Fix not cleanup led when bt_init failsChen Zhongjin1-1/+3
bt_init() calls bt_leds_init() to register led, but if it fails later, bt_leds_cleanup() is not called to unregister it. This can cause panic if the argument "bluetooth-power" in text is freed and then another led_trigger_register() tries to access it: BUG: unable to handle page fault for address: ffffffffc06d3bc0 RIP: 0010:strcmp+0xc/0x30 Call Trace: <TASK> led_trigger_register+0x10d/0x4f0 led_trigger_register_simple+0x7d/0x100 bt_init+0x39/0xf7 [bluetooth] do_one_initcall+0xd0/0x4e0 Fixes: e64c97b53bc6 ("Bluetooth: Add combined LED trigger for controller power") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-03Bluetooth: Fix support for Read Local Supported Codecs V2Chethan T N2-13/+16
Handling of Read Local Supported Codecs was broken during the HCI serialization design change patches. Fixes: d0b137062b2d ("Bluetooth: hci_sync: Rework init stages") Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-03Bluetooth: L2CAP: Fix u8 overflowSungwoo Kim1-1/+2
By keep sending L2CAP_CONF_REQ packets, chan->num_conf_rsp increases multiple times and eventually it will wrap around the maximum number (i.e., 255). This patch prevents this by adding a boundary check with L2CAP_MAX_CONF_RSP Btmon log: Bluetooth monitor ver 5.64 = Note: Linux version 6.1.0-rc2 (x86_64) 0.264594 = Note: Bluetooth subsystem version 2.22 0.264636 @ MGMT Open: btmon (privileged) version 1.22 {0x0001} 0.272191 = New Index: 00:00:00:00:00:00 (Primary,Virtual,hci0) [hci0] 13.877604 @ RAW Open: 9496 (privileged) version 2.22 {0x0002} 13.890741 = Open Index: 00:00:00:00:00:00 [hci0] 13.900426 (...) > ACL Data RX: Handle 200 flags 0x00 dlen 1033 #32 [hci0] 14.273106 invalid packet size (12 != 1033) 08 00 01 00 02 01 04 00 01 10 ff ff ............ > ACL Data RX: Handle 200 flags 0x00 dlen 1547 #33 [hci0] 14.273561 invalid packet size (14 != 1547) 0a 00 01 00 04 01 06 00 40 00 00 00 00 00 ........@..... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 #34 [hci0] 14.274390 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 00 00 00 04 ........@....... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 #35 [hci0] 14.274932 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 07 00 03 00 ........@....... = bluetoothd: Bluetooth daemon 5.43 14.401828 > ACL Data RX: Handle 200 flags 0x00 dlen 1033 #36 [hci0] 14.275753 invalid packet size (12 != 1033) 08 00 01 00 04 01 04 00 40 00 00 00 ........@... Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-03Bluetooth: silence a dmesg error message in hci_request.cMateusz Jończyk1-1/+1
On kernel 6.1-rcX, I have been getting the following dmesg error message on every boot, resume from suspend and rfkill unblock of the Bluetooth device: Bluetooth: hci0: HCI_REQ-0xfcf0 After some investigation, it turned out to be caused by commit dd50a864ffae ("Bluetooth: Delete unreferenced hci_request code") which modified hci_req_add() in net/bluetooth/hci_request.c to always print an error message when it is executed. In my case, the function was executed by msft_set_filter_enable() in net/bluetooth/msft.c, which provides support for Microsoft vendor opcodes. As explained by Brian Gix, "the error gets logged because it is using a deprecated (but still working) mechanism to issue HCI opcodes" [1]. So this is just a debugging tool to show that a deprecated function is executed. As such, it should not be included in the mainline kernel. See for example commit 771c035372a0 ("deprecate the '__deprecated' attribute warnings entirely and for good") Additionally, this error message is cryptic and the user is not able to do anything about it. [1] Link: https://lore.kernel.org/lkml/beb8dcdc3aee4c5c833aa382f35995f17e7961a1.camel@intel.com/ Fixes: dd50a864ffae ("Bluetooth: Delete unreferenced hci_request code") Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Cc: Brian Gix <brian.gix@intel.com> Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-03Bluetooth: hci_conn: add missing hci_dev_put() in iso_listen_bis()Wang ShaoBo1-0/+1
hci_get_route() takes reference, we should use hci_dev_put() to release it when not need anymore. Fixes: f764a6c2c1e4 ("Bluetooth: ISO: Add broadcast support") Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-03Bluetooth: 6LoWPAN: add missing hci_dev_put() in get_l2cap_conn()Wang ShaoBo1-0/+1
hci_get_route() takes reference, we should use hci_dev_put() to release it when not need anymore. Fixes: 6b8d4a6a0314 ("Bluetooth: 6LoWPAN: Use connected oriented channel instead of fixed one") Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-12-03Bluetooth: btusb: Fix CSR clones again by re-adding ERR_DATA_REPORTING quirkIsmael Ferreras Morezuelas1-2/+7
A patch series by a Qualcomm engineer essentially removed my quirk/workaround because they thought it was unnecessary. It wasn't, and it broke everything again: https://patchwork.kernel.org/project/netdevbpf/list/?series=661703&archive=both&state=* He argues that the quirk is not necessary because the code should check if the dongle says if it's supported or not. The problem is that for these Chinese CSR clones they say that it would work: = New Index: 00:00:00:00:00:00 (Primary,USB,hci0) = Open Index: 00:00:00:00:00:00 < HCI Command: Read Local Version Information (0x04|0x0001) plen 0 > HCI Event: Command Complete (0x0e) plen 12 > [hci0] 11.276039 Read Local Version Information (0x04|0x0001) ncmd 1 Status: Success (0x00) HCI version: Bluetooth 5.0 (0x09) - Revision 2064 (0x0810) LMP version: Bluetooth 5.0 (0x09) - Subversion 8978 (0x2312) Manufacturer: Cambridge Silicon Radio (10) ... < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 > HCI Event: Command Complete (0x0e) plen 68 > [hci0] 11.668030 Read Local Supported Commands (0x04|0x0002) ncmd 1 Status: Success (0x00) Commands: 163 entries ... Read Default Erroneous Data Reporting (Octet 18 - Bit 2) Write Default Erroneous Data Reporting (Octet 18 - Bit 3) ... ... < HCI Command: Read Default Erroneous Data Reporting (0x03|0x005a) plen 0 = Close Index: 00:1A:7D:DA:71:XX So bring it back wholesale. Fixes: 63b1a7dd38bf ("Bluetooth: hci_sync: Remove HCI_QUIRK_BROKEN_ERR_DATA_REPORTING") Fixes: e168f6900877 ("Bluetooth: btusb: Remove HCI_QUIRK_BROKEN_ERR_DATA_REPORTING for fake CSR") Fixes: 766ae2422b43 ("Bluetooth: hci_sync: Check LMP feature bit instead of quirk") Cc: stable@vger.kernel.org Cc: Zijun Hu <quic_zijuhu@quicinc.com> Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Tested-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com> Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-11-25use less confusing names for iov_iter direction initializersAl Viro3-3/+3
READ/WRITE proved to be actively confusing - the meanings are "data destination, as used with read(2)" and "data source, as used with write(2)", but people keep interpreting those as "we read data from it" and "we write data to it", i.e. exactly the wrong way. Call them ITER_DEST and ITER_SOURCE - at least that is harder to misinterpret... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-11-18treewide: use get_random_u32_inclusive() when possibleJason A. Donenfeld1-3/+2
These cases were done with this Coccinelle: @@ expression H; expression L; @@ - (get_random_u32_below(H) + L) + get_random_u32_inclusive(L, H + L - 1) @@ expression H; expression L; expression E; @@ get_random_u32_inclusive(L, H - + E - - E ) @@ expression H; expression L; expression E; @@ get_random_u32_inclusive(L, H - - E - + E ) @@ expression H; expression L; expression E; expression F; @@ get_random_u32_inclusive(L, H - - E + F - + E ) @@ expression H; expression L; expression E; expression F; @@ get_random_u32_inclusive(L, H - + E + F - - E ) And then subsequently cleaned up by hand, with several automatic cases rejected if it didn't make sense contextually. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-11-18treewide: use get_random_u32_below() instead of deprecated functionJason A. Donenfeld1-2/+2
This is a simple mechanical transformation done by: @@ expression E; @@ - prandom_u32_max + get_random_u32_below (E) Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Reviewed-by: SeongJae Park <sj@kernel.org> # for damon Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-11-03Bluetooth: L2CAP: Fix attempting to access uninitialized memoryLuiz Augusto von Dentz1-1/+2
On l2cap_parse_conf_req the variable efs is only initialized if remote_efs has been set. CVE: CVE-2022-42895 CC: stable@vger.kernel.org Reported-by: Tamás Koczka <poprdi@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>
2022-11-03Bluetooth: L2CAP: Fix l2cap_global_chan_by_psmLuiz Augusto von Dentz1-1/+1
l2cap_global_chan_by_psm shall not return fixed channels as they are not meant to be connected by (S)PSM. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>
2022-11-03Bluetooth: L2CAP: Fix accepting connection request for invalid SPSMLuiz Augusto von Dentz1-0/+25
The Bluetooth spec states that the valid range for SPSM is from 0x0001-0x00ff so it is invalid to accept values outside of this range: BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 3, Part A page 1059: Table 4.15: L2CAP_LE_CREDIT_BASED_CONNECTION_REQ SPSM ranges CVE: CVE-2022-42896 CC: stable@vger.kernel.org Reported-by: Tamás Koczka <poprdi@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>
2022-11-03Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnectLuiz Augusto von Dentz1-0/+11
When disconnecting an ISO link the controller may not generate HCI_EV_NUM_COMP_PKTS for unacked packets which needs to be restored in hci_conn_del otherwise the host would assume they are still in use and would not be able to use all the buffers available. Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Frédéric Danis <frederic.danis@collabora.com>
2022-11-03Bluetooth: L2CAP: Fix memory leak in vhci_writeHawkins Jiawei1-4/+3
Syzkaller reports a memory leak as follows: ==================================== BUG: memory leak unreferenced object 0xffff88810d81ac00 (size 240): [...] hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff838733d9>] __alloc_skb+0x1f9/0x270 net/core/skbuff.c:418 [<ffffffff833f742f>] alloc_skb include/linux/skbuff.h:1257 [inline] [<ffffffff833f742f>] bt_skb_alloc include/net/bluetooth/bluetooth.h:469 [inline] [<ffffffff833f742f>] vhci_get_user drivers/bluetooth/hci_vhci.c:391 [inline] [<ffffffff833f742f>] vhci_write+0x5f/0x230 drivers/bluetooth/hci_vhci.c:511 [<ffffffff815e398d>] call_write_iter include/linux/fs.h:2192 [inline] [<ffffffff815e398d>] new_sync_write fs/read_write.c:491 [inline] [<ffffffff815e398d>] vfs_write+0x42d/0x540 fs/read_write.c:578 [<ffffffff815e3cdd>] ksys_write+0x9d/0x160 fs/read_write.c:631 [<ffffffff845e0645>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff845e0645>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84600087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd ==================================== HCI core will uses hci_rx_work() to process frame, which is queued to the hdev->rx_q tail in hci_recv_frame() by HCI driver. Yet the problem is that, HCI core may not free the skb after handling ACL data packets. To be more specific, when start fragment does not contain the L2CAP length, HCI core just copies skb into conn->rx_skb and finishes frame process in l2cap_recv_acldata(), without freeing the skb, which triggers the above memory leak. This patch solves it by releasing the relative skb, after processing the above case in l2cap_recv_acldata(). Fixes: 4d7ea8ee90e4 ("Bluetooth: L2CAP: Fix handling fragmented length") Link: https://lore.kernel.org/all/0000000000000d0b1905e6aaef64@google.com/ Reported-and-tested-by: syzbot+8f819e36e01022991cfa@syzkaller.appspotmail.com Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-11-03Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del()Zhengchao Shao1-0/+1
When l2cap_recv_frame() is invoked to receive data, and the cid is L2CAP_CID_A2MP, if the channel does not exist, it will create a channel. However, after a channel is created, the hold operation of the channel is not performed. In this case, the value of channel reference counting is 1. As a result, after hci_error_reset() is triggered, l2cap_conn_del() invokes the close hook function of A2MP to release the channel. Then l2cap_chan_unlock(chan) will trigger UAF issue. The process is as follows: Receive data: l2cap_data_channel() a2mp_channel_create() --->channel ref is 2 l2cap_chan_put() --->channel ref is 1 Triger event: hci_error_reset() hci_dev_do_close() ... l2cap_disconn_cfm() l2cap_conn_del() l2cap_chan_hold() --->channel ref is 2 l2cap_chan_del() --->channel ref is 1 a2mp_chan_close_cb() --->channel ref is 0, release channel l2cap_chan_unlock() --->UAF of channel The detailed Call Trace is as follows: BUG: KASAN: use-after-free in __mutex_unlock_slowpath+0xa6/0x5e0 Read of size 8 at addr ffff8880160664b8 by task kworker/u11:1/7593 Workqueue: hci0 hci_error_reset Call Trace: <TASK> dump_stack_lvl+0xcd/0x134 print_report.cold+0x2ba/0x719 kasan_report+0xb1/0x1e0 kasan_check_range+0x140/0x190 __mutex_unlock_slowpath+0xa6/0x5e0 l2cap_conn_del+0x404/0x7b0 l2cap_disconn_cfm+0x8c/0xc0 hci_conn_hash_flush+0x11f/0x260 hci_dev_close_sync+0x5f5/0x11f0 hci_dev_do_close+0x2d/0x70 hci_error_reset+0x9e/0x140 process_one_work+0x98a/0x1620 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 7593: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0xa9/0xd0 l2cap_chan_create+0x40/0x930 amp_mgr_create+0x96/0x990 a2mp_channel_create+0x7d/0x150 l2cap_recv_frame+0x51b8/0x9a70 l2cap_recv_acldata+0xaa3/0xc00 hci_rx_work+0x702/0x1220 process_one_work+0x98a/0x1620 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 Freed by task 7593: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 ____kasan_slab_free+0x167/0x1c0 slab_free_freelist_hook+0x89/0x1c0 kfree+0xe2/0x580 l2cap_chan_put+0x22a/0x2d0 l2cap_conn_del+0x3fc/0x7b0 l2cap_disconn_cfm+0x8c/0xc0 hci_conn_hash_flush+0x11f/0x260 hci_dev_close_sync+0x5f5/0x11f0 hci_dev_do_close+0x2d/0x70 hci_error_reset+0x9e/0x140 process_one_work+0x98a/0x1620 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 Last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0xbe/0xd0 call_rcu+0x99/0x740 netlink_release+0xe6a/0x1cf0 __sock_release+0xcd/0x280 sock_close+0x18/0x20 __fput+0x27c/0xa90 task_work_run+0xdd/0x1a0 exit_to_user_mode_prepare+0x23c/0x250 syscall_exit_to_user_mode+0x19/0x50 do_syscall_64+0x42/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Second to last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0xbe/0xd0 call_rcu+0x99/0x740 netlink_release+0xe6a/0x1cf0 __sock_release+0xcd/0x280 sock_close+0x18/0x20 __fput+0x27c/0xa90 task_work_run+0xdd/0x1a0 exit_to_user_mode_prepare+0x23c/0x250 syscall_exit_to_user_mode+0x19/0x50 do_syscall_64+0x42/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: d0be8347c623 ("Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-11-03Bluetooth: hci_conn: Fix CIS connection dst_type handlingPauli Virtanen2-8/+13
hci_connect_cis and iso_connect_cis call hci_bind_cis inconsistently with dst_type being either ISO socket address type or the HCI type, but these values cannot be mixed like this. Fix this by using only the HCI type. CIS connection dst_type was also not initialized in hci_bind_cis, even though it is used in hci_conn_hash_lookup_cis to find existing connections. Set the value in hci_bind_cis, so that existing CIS connections are found e.g. when doing deferred socket connections, also when dst_type is not 0 (ADDR_LE_DEV_PUBLIC). Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-11-03Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sduMaxim Mikityanskiy1-7/+41
Fix the race condition between the following two flows that run in parallel: 1. l2cap_reassemble_sdu -> chan->ops->recv (l2cap_sock_recv_cb) -> __sock_queue_rcv_skb. 2. bt_sock_recvmsg -> skb_recv_datagram, skb_free_datagram. An SKB can be queued by the first flow and immediately dequeued and freed by the second flow, therefore the callers of l2cap_reassemble_sdu can't use the SKB after that function returns. However, some places continue accessing struct l2cap_ctrl that resides in the SKB's CB for a short time after l2cap_reassemble_sdu returns, leading to a use-after-free condition (the stack trace is below, line numbers for kernel 5.19.8). Fix it by keeping a local copy of struct l2cap_ctrl. BUG: KASAN: use-after-free in l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth Read of size 1 at addr ffff88812025f2f0 by task kworker/u17:3/43169 Workqueue: hci0 hci_rx_work [bluetooth] Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4)) print_report.cold (mm/kasan/report.c:314 mm/kasan/report.c:429) ? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth kasan_report (mm/kasan/report.c:162 mm/kasan/report.c:493) ? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth l2cap_rx (net/bluetooth/l2cap_core.c:7236 net/bluetooth/l2cap_core.c:7271) bluetooth ret_from_fork (arch/x86/entry/entry_64.S:306) </TASK> Allocated by task 43169: kasan_save_stack (mm/kasan/common.c:39) __kasan_slab_alloc (mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469) kmem_cache_alloc_node (mm/slab.h:750 mm/slub.c:3243 mm/slub.c:3293) __alloc_skb (net/core/skbuff.c:414) l2cap_recv_frag (./include/net/bluetooth/bluetooth.h:425 net/bluetooth/l2cap_core.c:8329) bluetooth l2cap_recv_acldata (net/bluetooth/l2cap_core.c:8442) bluetooth hci_rx_work (net/bluetooth/hci_core.c:3642 net/bluetooth/hci_core.c:3832) bluetooth process_one_work (kernel/workqueue.c:2289) worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2437) kthread (kernel/kthread.c:376) ret_from_fork (arch/x86/entry/entry_64.S:306) Freed by task 27920: kasan_save_stack (mm/kasan/common.c:39) kasan_set_track (mm/kasan/common.c:45) kasan_set_free_info (mm/kasan/generic.c:372) ____kasan_slab_free (mm/kasan/common.c:368 mm/kasan/common.c:328) slab_free_freelist_hook (mm/slub.c:1780) kmem_cache_free (mm/slub.c:3536 mm/slub.c:3553) skb_free_datagram (./include/net/sock.h:1578 ./include/net/sock.h:1639 net/core/datagram.c:323) bt_sock_recvmsg (net/bluetooth/af_bluetooth.c:295) bluetooth l2cap_sock_recvmsg (net/bluetooth/l2cap_sock.c:1212) bluetooth sock_read_iter (net/socket.c:1087) new_sync_read (./include/linux/fs.h:2052 fs/read_write.c:401) vfs_read (fs/read_write.c:482) ksys_read (fs/read_write.c:620) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) Link: https://lore.kernel.org/linux-bluetooth/CAKErNvoqga1WcmoR3-0875esY6TVWFQDandbVZncSiuGPBQXLA@mail.gmail.com/T/#u Fixes: d2a7ac5d5d3a ("Bluetooth: Add the ERTM receive state machine") Fixes: 4b51dae96731 ("Bluetooth: Add streaming mode receive and incoming packet classifier") Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-10-08Merge tag 'driver-core-6.1-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big set of driver core and debug printk changes for 6.1-rc1. Included in here is: - dynamic debug updates for the core and the drm subsystem. The drm changes have all been acked by the relevant maintainers - kernfs fixes for syzbot reported problems - kernfs refactors and updates for cgroup requirements - magic number cleanups and removals from the kernel tree (they were not being used and they really did not actually do anything) - other tiny cleanups All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (74 commits) docs: filesystems: sysfs: Make text and code for ->show() consistent Documentation: NBD_REQUEST_MAGIC isn't a magic number a.out: restore CMAGIC device property: Add const qualifier to device_get_match_data() parameter drm_print: add _ddebug descriptor to drm_*dbg prototypes drm_print: prefer bare printk KERN_DEBUG on generic fn drm_print: optimize drm_debug_enabled for jump-label drm-print: add drm_dbg_driver to improve namespace symmetry drm-print.h: include dyndbg header drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro drm_print: interpose drm_*dbg with forwarding macros drm: POC drm on dyndbg - use in core, 2 helpers, 3 drivers. drm_print: condense enum drm_debug_category debugfs: use DEFINE_SHOW_ATTRIBUTE to define debugfs_regset32_fops driver core: use IS_ERR_OR_NULL() helper in device_create_groups_vargs() Documentation: ENI155_MAGIC isn't a magic number Documentation: NBD_REPLY_MAGIC isn't a magic number nbd: remove define-only NBD_MAGIC, previously magic number Documentation: FW_HEADER_MAGIC isn't a magic number Documentation: EEPROM_MAGIC_VALUE isn't a magic number ...
2022-10-08Merge tag 'tty-6.1-rc1' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 6.1-rc1. Lots of cleanups in here, no real new functionality this time around, with the diffstat being that we removed more lines than we added! Included in here are: - termios unification cleanups from Al Viro, it's nice to finally get this work done - tty serial transmit cleanups in various drivers in preparation for more cleanup and unification in future releases (that work was not ready for this release) - n_gsm fixes and updates - ktermios cleanups and code reductions - dt bindings json conversions and updates for new devices - some serial driver updates for new devices - lots of other tiny cleanups and janitorial stuff. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits) serial: cpm_uart: Don't request IRQ too early for console port tty: serial: do unlock on a common path in altera_jtaguart_console_putc() tty: serial: unify TX space reads under altera_jtaguart_tx_space() tty: serial: use FIELD_GET() in lqasc_tx_ready() tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar() tty: serial: allow pxa.c to be COMPILE_TESTed serial: stm32: Fix unused-variable warning tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL serial: 8250: Fix restoring termios speed after suspend serial: Deassert Transmit Enable on probe in driver-specific way serial: 8250_dma: Convert to use uart_xmit_advance() serial: 8250_omap: Convert to use uart_xmit_advance() MAINTAINERS: Solve warning regarding inexistent atmel-usart binding serial: stm32: Deassert Transmit Enable on ->rs485_config() serial: ar933x: Deassert Transmit Enable on ->rs485_config() tty: serial: atmel: Use FIELD_PREP/FIELD_GET tty: serial: atmel: Make the driver aware of the existence of GCLK tty: serial: atmel: Only divide Clock Divisor if the IP is USART tty: serial: atmel: Separate mode clearing between UART and USART dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock ...
2022-10-01Bluetooth: hci_sync: Fix not indicating power stateLuiz Augusto von Dentz1-0/+1
When setting power state using legacy/non-mgmt API (e.g hcitool hci0 up) the likes of mgmt_set_powered_complete won't be called causing clients of the MGMT API to not be notified of the change of the state. Fixes: cf75ad8b41d2 ("Bluetooth: hci_sync: Convert MGMT_SET_POWERED") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com>