summaryrefslogtreecommitdiff
path: root/net/hsr/hsr_slave.c
AgeCommit message (Collapse)AuthorFilesLines
2021-02-12net: hsr: add offloading supportGeorge McCollister1-4/+6
Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion tag removal, duplicate generation and forwarding. For HSR, insertion involves the switch adding a 6 byte HSR header after the 14 byte Ethernet header. For PRP it adds a 6 byte trailer. Tag removal involves automatically stripping the HSR/PRP header/trailer in the switch. This is possible when the switch also performs auto deduplication using the HSR/PRP header/trailer (making it no longer required). Forwarding involves automatically forwarding between redundant ports in an HSR. This is crucial because delay is accumulated as a frame passes through each node in the ring. Duplication involves the switch automatically sending a single frame from the CPU port to both redundant ports. This is required because the inserted HSR/PRP header/trailer must contain the same sequence number on the frames sent out both redundant ports. Export is_hsr_master so DSA can tell them apart from other devices in dsa_slave_changeupper. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27net: prp: add packet handling supportMurali Karicheri1-1/+23
DAN-P (Dual Attached Nodes PRP) nodes are expected to receive traditional IP packets as well as PRP (Parallel Redundancy Protocol) tagged (trailer) packets. PRP trailer is 6 bytes of PRP protocol unit called RCT, Redundancy Control Trailer (RCT) similar to HSR tag. PRP network can have traditional devices such as bridges/switches or PC attached to it and should be able to communicate. Regular Ethernet devices treat the RCT as pads. This patch adds logic to format L2 frames from network stack to add a trailer (RCT) and send it as duplicates over the slave interfaces when the protocol is PRP as per IEC 62439-3. At the ingress, it strips the trailer, do duplicate detection and rejection and forward a stripped frame up the network stack. PRP device should accept frames from Singly Attached Nodes (SAN) and thus the driver mark the link where the frame came from in the node table. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27hsr: enhance netlink socket interface to support PRPMurali Karicheri1-0/+2
Parallel Redundancy Protocol (PRP) is another redundancy protocol introduced by IEC 63439 standard. It is similar to HSR in many aspects:- - Use a pair of Ethernet interfaces to created the PRP device - Use a 6 byte redundancy protocol part (RCT, Redundancy Check Trailer) similar to HSR Tag. - Has Link Redundancy Entity (LRE) that works with RCT to implement redundancy. Key difference is that the protocol unit is a trailer instead of a prefix as in HSR. That makes it inter-operable with tradition network components such as bridges/switches which treat it as pad bytes, whereas HSR nodes requires some kind of translators (Called redbox) to talk to regular network devices. This features allows regular linux box to be converted to a DAN-P box. DAN-P stands for Dual Attached Node - PRP similar to DAN-H (Dual Attached Node - HSR). Add a comment at the header/source code to explicitly state that the driver files also handles PRP protocol as well. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-07net: hsr: fix incorrect type usage for protocol variableMurali Karicheri1-1/+1
Fix following sparse checker warning:- net/hsr/hsr_slave.c:38:18: warning: incorrect type in assignment (different base types) net/hsr/hsr_slave.c:38:18: expected unsigned short [unsigned] [usertype] protocol net/hsr/hsr_slave.c:38:18: got restricted __be16 [usertype] h_proto net/hsr/hsr_slave.c:39:25: warning: restricted __be16 degrades to integer net/hsr/hsr_slave.c:39:57: warning: restricted __be16 degrades to integer Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-4/+4
Overlapping header include additions in macsec.c A bug fix in 'net' overlapping with the removal of 'version' string in ena_netdev.c Overlapping test additions in selftests Makefile Overlapping PCI ID table adjustments in iwlwifi driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22hsr: fix general protection fault in hsr_addr_is_self()Taehee Yoo1-4/+4
The port->hsr is used in the hsr_handle_frame(), which is a callback of rx_handler. hsr master and slaves are initialized in hsr_add_port(). This function initializes several pointers, which includes port->hsr after registering rx_handler. So, in the rx_handler routine, un-initialized pointer would be used. In order to fix this, pointers should be initialized before registering rx_handler. Test commands: ip netns del left ip netns del right modprobe -rv veth modprobe -rv hsr killall ping modprobe hsr ip netns add left ip netns add right ip link add veth0 type veth peer name veth1 ip link add veth2 type veth peer name veth3 ip link add veth4 type veth peer name veth5 ip link set veth1 netns left ip link set veth3 netns right ip link set veth4 netns left ip link set veth5 netns right ip link set veth0 up ip link set veth2 up ip link set veth0 address fc:00:00:00:00:01 ip link set veth2 address fc:00:00:00:00:02 ip netns exec left ip link set veth1 up ip netns exec left ip link set veth4 up ip netns exec right ip link set veth3 up ip netns exec right ip link set veth5 up ip link add hsr0 type hsr slave1 veth0 slave2 veth2 ip a a 192.168.100.1/24 dev hsr0 ip link set hsr0 up ip netns exec left ip link add hsr1 type hsr slave1 veth1 slave2 veth4 ip netns exec left ip a a 192.168.100.2/24 dev hsr1 ip netns exec left ip link set hsr1 up ip netns exec left ip n a 192.168.100.1 dev hsr1 lladdr \ fc:00:00:00:00:01 nud permanent ip netns exec left ip n r 192.168.100.1 dev hsr1 lladdr \ fc:00:00:00:00:01 nud permanent for i in {1..100} do ip netns exec left ping 192.168.100.1 & done ip netns exec left hping3 192.168.100.1 -2 --flood & ip netns exec right ip link add hsr2 type hsr slave1 veth3 slave2 veth5 ip netns exec right ip a a 192.168.100.3/24 dev hsr2 ip netns exec right ip link set hsr2 up ip netns exec right ip n a 192.168.100.1 dev hsr2 lladdr \ fc:00:00:00:00:02 nud permanent ip netns exec right ip n r 192.168.100.1 dev hsr2 lladdr \ fc:00:00:00:00:02 nud permanent for i in {1..100} do ip netns exec right ping 192.168.100.1 & done ip netns exec right hping3 192.168.100.1 -2 --flood & while : do ip link add hsr0 type hsr slave1 veth0 slave2 veth2 ip a a 192.168.100.1/24 dev hsr0 ip link set hsr0 up ip link del hsr0 done Splat looks like: [ 120.954938][ C0] general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1]I [ 120.957761][ C0] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] [ 120.959064][ C0] CPU: 0 PID: 1511 Comm: hping3 Not tainted 5.6.0-rc5+ #460 [ 120.960054][ C0] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 120.962261][ C0] RIP: 0010:hsr_addr_is_self+0x65/0x2a0 [hsr] [ 120.963149][ C0] Code: 44 24 18 70 73 2f c0 48 c1 eb 03 48 8d 04 13 c7 00 f1 f1 f1 f1 c7 40 04 00 f2 f2 f2 4 [ 120.966277][ C0] RSP: 0018:ffff8880d9c09af0 EFLAGS: 00010206 [ 120.967293][ C0] RAX: 0000000000000006 RBX: 1ffff1101b38135f RCX: 0000000000000000 [ 120.968516][ C0] RDX: dffffc0000000000 RSI: ffff8880d17cb208 RDI: 0000000000000000 [ 120.969718][ C0] RBP: 0000000000000030 R08: ffffed101b3c0e3c R09: 0000000000000001 [ 120.972203][ C0] R10: 0000000000000001 R11: ffffed101b3c0e3b R12: 0000000000000000 [ 120.973379][ C0] R13: ffff8880aaf80100 R14: ffff8880aaf800f2 R15: ffff8880aaf80040 [ 120.974410][ C0] FS: 00007f58e693f740(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000 [ 120.979794][ C0] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 120.980773][ C0] CR2: 00007ffcb8b38f29 CR3: 00000000afe8e001 CR4: 00000000000606f0 [ 120.981945][ C0] Call Trace: [ 120.982411][ C0] <IRQ> [ 120.982848][ C0] ? hsr_add_node+0x8c0/0x8c0 [hsr] [ 120.983522][ C0] ? rcu_read_lock_held+0x90/0xa0 [ 120.984159][ C0] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 120.984944][ C0] hsr_handle_frame+0x1db/0x4e0 [hsr] [ 120.985597][ C0] ? hsr_nl_nodedown+0x2b0/0x2b0 [hsr] [ 120.986289][ C0] __netif_receive_skb_core+0x6bf/0x3170 [ 120.992513][ C0] ? check_chain_key+0x236/0x5d0 [ 120.993223][ C0] ? do_xdp_generic+0x1460/0x1460 [ 120.993875][ C0] ? register_lock_class+0x14d0/0x14d0 [ 120.994609][ C0] ? __netif_receive_skb_one_core+0x8d/0x160 [ 120.995377][ C0] __netif_receive_skb_one_core+0x8d/0x160 [ 120.996204][ C0] ? __netif_receive_skb_core+0x3170/0x3170 [ ... ] Reported-by: syzbot+fcf5dd39282ceb27108d@syzkaller.appspotmail.com Fixes: c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-05hsr: fix refcnt leak of hsr slave interfaceTaehee Yoo1-4/+1
In the commit e0a4b99773d3 ("hsr: use upper/lower device infrastructure"), dev_get() was removed but dev_put() in the error path wasn't removed. So, if creating hsr interface command is failed, the reference counter leak of lower interface would occur. Test commands: ip link add dummy0 type dummy ip link add ipvlan0 link dummy0 type ipvlan mode l2 ip link add ipvlan1 link dummy0 type ipvlan mode l2 ip link add hsr0 type hsr slave1 ipvlan0 slave2 ipvlan1 ip link del ipvlan0 Result: [ 633.271992][ T1280] unregister_netdevice: waiting for ipvlan0 to become free. Usage count = -1 Fixes: e0a4b99773d3 ("hsr: use upper/lower device infrastructure") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-01hsr: use upper/lower device infrastructureTaehee Yoo1-17/+18
netdev_upper_dev_link() is useful to manage lower/upper interfaces. And this function internally validates looping, maximum depth. All or most virtual interfaces that could have a real interface (e.g. macsec, macvlan, ipvlan etc.) use lower/upper infrastructure. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-01hsr: remove unnecessary rcu_read_lock() in hsr moduleTaehee Yoo1-3/+0
In order to access the port list, the hsr_port_get_hsr() is used. And this is protected by RTNL and RCU. The hsr_fill_info(), hsr_check_carrier(), hsr_dev_open() and hsr_get_max_mtu() are protected by RTNL. So, rcu_read_lock() in these functions are not necessary. The hsr_handle_frame() also uses rcu_read_lock() but this function is called by packet path. It's already protected by RCU. So, the rcu_read_lock() in hsr_handle_frame() can be removed. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-01hsr: use extack error message instead of netdev_infoTaehee Yoo1-8/+12
If HSR uses the extack instead of netdev_info(), users can get error messages immediately without any checking the kernel message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-04net: hsr: fix possible NULL deref in hsr_handle_frame()Eric Dumazet1-0/+2
hsr_port_get_rcu() can return NULL, so we need to be careful. general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 1 PID: 10249 Comm: syz-executor.5 Not tainted 5.5.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__read_once_size include/linux/compiler.h:199 [inline] RIP: 0010:hsr_addr_is_self+0x86/0x330 net/hsr/hsr_framereg.c:44 Code: 04 00 f3 f3 f3 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 e8 6b ff 94 f9 4c 89 f2 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 75 02 00 00 48 8b 43 30 49 39 c6 49 89 47 c0 0f RSP: 0018:ffffc90000da8a90 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff87e0cc33 RDX: 0000000000000006 RSI: ffffffff87e035d5 RDI: 0000000000000000 RBP: ffffc90000da8b20 R08: ffff88808e7de040 R09: ffffed1015d2707c R10: ffffed1015d2707b R11: ffff8880ae9383db R12: ffff8880a689bc5e R13: 1ffff920001b5153 R14: 0000000000000030 R15: ffffc90000da8af8 FS: 00007fd7a42be700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32338000 CR3: 00000000a928c000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> hsr_handle_frame+0x1c5/0x630 net/hsr/hsr_slave.c:31 __netif_receive_skb_core+0xfbc/0x30b0 net/core/dev.c:5099 __netif_receive_skb_one_core+0xa8/0x1a0 net/core/dev.c:5196 __netif_receive_skb+0x2c/0x1d0 net/core/dev.c:5312 process_backlog+0x206/0x750 net/core/dev.c:6144 napi_poll net/core/dev.c:6582 [inline] net_rx_action+0x508/0x1120 net/core/dev.c:6650 __do_softirq+0x262/0x98c kernel/softirq.c:292 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1082 </IRQ> Fixes: c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-06hsr: fix a memory leak in hsr_del_port()Cong Wang1-0/+1
hsr_del_port() should release all the resources allocated in hsr_add_port(). As a consequence of this change, hsr_for_each_port() is no longer safe to work with hsr_del_port(), switch to list_for_each_entry_safe() as we always hold RTNL lock. Cc: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-07net: hsr: convert to SPDX identifierMurali Karicheri1-5/+1
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-07net: hsr: fix NULL checks in the codeMurali Karicheri1-3/+3
This patch replaces all instance of NULL checks such as if (foo == NULL) with if (!foo) Also if (foo != NULL) with if (foo) This is seen when ran checkpatch.pl -f on files under net/hsr and suggestion is to replace as above. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-07net: hsr: remove unnecessary paranthesis from the codeMurali Karicheri1-2/+2
This patch fixes unnecessary paranthesis from the code. This is seen when ran checkpatch.pl -f option on files under net/hsr. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-07net: hsr: fix multiple blank lines in the codeMurali Karicheri1-3/+0
This patch fixes multiple blank lines in the code. This is seen when ran checkpatch.pl -f option for files under net/hsr Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07net-next: treewide use is_vlan_dev() helper function.Parav Pandit1-1/+2
This patch makes use of is_vlan_dev() function instead of flag comparison which is exactly done by is_vlan_dev() helper function. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jon Maxwell <jmaxwell37@gmail.com> Acked-by: Johannes Thumshirn <jth@kernel.org> Acked-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-16net/hsr: Added support for HSR v1Peter Heise1-1/+3
This patch adds support for the newer version 1 of the HSR networking standard. Version 0 is still default and the new version has to be selected via iproute2. Main changes are in the supervision frame handling and its ethertype field. Signed-off-by: Peter Heise <peter.heise@airbus.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01net/hsr: Fix NULL pointer dereference and refcnt bugs when deleting a HSR ↵Arvid Brodin1-3/+7
interface. To repeat: $ sudo ip link del hsr0 BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffff8187f495>] hsr_del_port+0x15/0xa0 etc... Bug description: As part of the hsr master device destruction, hsr_del_port() is called for each of the hsr ports. At each such call, the master device is updated regarding features and mtu. When the master device is freed before the slave interfaces, master will be NULL in hsr_del_port(), which led to a NULL pointer dereference. Additionally, dev_put() was called on the master device itself in hsr_del_port(), causing a refcnt error. A third bug in the same code path was that the rtnl lock was not taken before hsr_del_port() was called as part of hsr_dev_destroy(). The reporter (Nicolas Dichtel) also said: "hsr_netdev_notify() supposes that the port will always be available when the notification is for an hsr interface. It's wrong. For example, netdev_wait_allrefs() may resend NETDEV_UNREGISTER.". As a precaution against this, a check for port == NULL was added in hsr_dev_notify(). Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Fixes: 51f3c605318b056a ("net/hsr: Move slave init to hsr_slave.c.") Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Better frame dispatchArvid Brodin1-235/+52
This patch removes the separate paths for frames coming from the outside, and frames sent from the HSR device, and instead makes all frames go through hsr_forward_skb() in hsr_forward.c. This greatly improves code readability and also opens up the possibility for future support of the HSR Interlink device that is the basis for HSR RedBoxes and HSR QuadBoxes, as well as VLAN compatibility. Other improvements: * A reduction in the number of times an skb is copied on machines without HAVE_EFFICIENT_UNALIGNED_ACCESS, which improves throughput somewhat. * Headers are now created using the standard eth_header(), and using the standard hard_header_len. * Each HSR slave now gets its own private skb, so slave-specific fields can be correctly set. Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Implemented .ndo_fix_features (better device features handling).Arvid Brodin1-0/+2
Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Use list_head (and rcu) instead of array for slave devices.Arvid Brodin1-78/+121
Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Move slave init to hsr_slave.c.Arvid Brodin1-0/+91
Also try to prevent some possible slave dereference race conditions. This is finalized in the next patch, which abandons the slave array in favour of a list_head list and list RCU. Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/hsr: Switch from dev_add_pack() to netdev_rx_handler_register()Arvid Brodin1-0/+243
Also move the frame receive handler to hsr_slave.c. Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>