summaryrefslogtreecommitdiff
path: root/net/ipv6/ip6_input.c
AgeCommit message (Collapse)AuthorFilesLines
2021-03-18ipv6: weaken the v4mapped source checkJakub Kicinski1-10/+0
This reverts commit 6af1799aaf3f1bc8defedddfa00df3192445bbf3. Commit 6af1799aaf3f ("ipv6: drop incoming packets having a v4mapped source address") introduced an input check against v4mapped addresses. Use of such addresses on the wire is indeed questionable and not allowed on public Internet. As the commit pointed out https://tools.ietf.org/html/draft-itojun-v6ops-v4mapped-harmful-02 lists potential issues. Unfortunately there are applications which use v4mapped addresses, and breaking them is a clear regression. For example v4mapped addresses (or any semi-valid addresses, really) may be used for uni-direction event streams or packet export. Since the issue which sparked the addition of the check was with TCP and request_socks in particular push the check down to TCPv6 and DCCP. This restores the ability to receive UDPv6 packets with v4mapped address as the source. Keep using the IPSTATS_MIB_INHDRERRORS statistic to minimize the user-visible changes. Fixes: 6af1799aaf3f ("ipv6: drop incoming packets having a v4mapped source address") Reported-by: Sunyi Shao <sunyishao@fb.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-05ipv6: move udp declarations to net/udp.hLeon Romanovsky1-2/+1
Fix the following compilation warning: net/ipv6/udp.c:1031:30: warning: no previous prototype for 'udp_v6_early_demux' [-Wmissing-prototypes] 1031 | INDIRECT_CALLABLE_SCOPE void udp_v6_early_demux(struct sk_buff *skb) | ^~~~~~~~~~~~~~~~~~ net/ipv6/udp.c:1072:29: warning: no previous prototype for 'udpv6_rcv' [-Wmissing-prototypes] 1072 | INDIRECT_CALLABLE_SCOPE int udpv6_rcv(struct sk_buff *skb) | ^~~~~~~~~ Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-03-30bpf: Add socket assign supportJoe Stringer1-1/+2
Add support for TPROXY via a new bpf helper, bpf_sk_assign(). This helper requires the BPF program to discover the socket via a call to bpf_sk*_lookup_*(), then pass this socket to the new helper. The helper takes its own reference to the socket in addition to any existing reference that may or may not currently be obtained for the duration of BPF processing. For the destination socket to receive the traffic, the traffic must be routed towards that socket via local route. The simplest example route is below, but in practice you may want to route traffic more narrowly (eg by CIDR): $ ip route add local default dev lo This patch avoids trying to introduce an extra bit into the skb->sk, as that would require more invasive changes to all code interacting with the socket to ensure that the bit is handled correctly, such as all error-handling cases along the path from the helper in BPF through to the orphan path in the input. Instead, we opt to use the destructor variable to switch on the prefetch of the socket. Signed-off-by: Joe Stringer <joe@wand.net.nz> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200329225342.16317-2-joe@wand.net.nz
2019-11-22ipv6: introduce and uses route look hints for list input.Paolo Abeni1-2/+24
When doing RX batch packet processing, we currently always repeat the route lookup for each ingress packet. When no custom rules are in place, and there aren't routes depending on source addresses, we know that packets with the same destination address will use the same dst. This change tries to avoid per packet route lookup caching the destination address of the latest successful lookup, and reusing it for the next packet when the above conditions are in place. Ingress traffic for most servers should fit. The measured performance delta under UDP flood vs a recvmmsg receiver is as follow: vanilla patched delta Kpps Kpps % 1431 1674 +17 In the worst-case scenario - each packet has a different destination address - the performance delta is within noise range. v3 -> v4: - support hints for SUBFLOW build, too (David A.) - several style fixes (Eric) v2 -> v3: - add fib6_has_custom_rules() helpers (David A.) - add ip6_extract_route_hint() helper (Edward C.) - use hint directly in ip6_list_rcv_finish() (Willem) v1 -> v2: - fix build issue with !CONFIG_IPV6_MULTIPLE_TABLES - fix potential race when fib6_has_custom_rules is set while processing a packet batch Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30inet: do not call sublist_rcv on empty listFlorian Westphal1-1/+2
syzbot triggered struct net NULL deref in NF_HOOK_LIST: RIP: 0010:NF_HOOK_LIST include/linux/netfilter.h:331 [inline] RIP: 0010:ip6_sublist_rcv+0x5c9/0x930 net/ipv6/ip6_input.c:292 ipv6_list_rcv+0x373/0x4b0 net/ipv6/ip6_input.c:328 __netif_receive_skb_list_ptype net/core/dev.c:5274 [inline] Reason: void ipv6_list_rcv(struct list_head *head, struct packet_type *pt, struct net_device *orig_dev) [..] list_for_each_entry_safe(skb, next, head, list) { /* iterates list */ skb = ip6_rcv_core(skb, dev, net); /* ip6_rcv_core drops skb -> NULL is returned */ if (skb == NULL) continue; [..] } /* sublist is empty -> curr_net is NULL */ ip6_sublist_rcv(&sublist, curr_dev, curr_net); Before the recent change NF_HOOK_LIST did a list iteration before struct net deref, i.e. it was a no-op in the empty list case. List iteration now happens after *net deref, causing crash. Follow the same pattern as the ip(v6)_list_rcv loop and add a list_empty test for the final sublist dispatch too. Cc: Edward Cree <ecree@solarflare.com> Reported-by: syzbot+c54f457cad330e57e967@syzkaller.appspotmail.com Fixes: ca58fbe06c54 ("netfilter: add and use nf_hook_slow_list()") Signed-off-by: Florian Westphal <fw@strlen.de> Tested-by: Leon Romanovsky <leonro@mellanox.com> Tested-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03ipv6: drop incoming packets having a v4mapped source addressEric Dumazet1-0/+10
This began with a syzbot report. syzkaller was injecting IPv6 TCP SYN packets having a v4mapped source address. After an unsuccessful 4-tuple lookup, TCP creates a request socket (SYN_RECV) and calls reqsk_queue_hash_req() reqsk_queue_hash_req() calls sk_ehashfn(sk) At this point we have AF_INET6 sockets, and the heuristic used by sk_ehashfn() to either hash the IPv4 or IPv6 addresses is to use ipv6_addr_v4mapped(&sk->sk_v6_daddr) For the particular spoofed packet, we end up hashing V4 addresses which were not initialized by the TCP IPv6 stack, so KMSAN fired a warning. I first fixed sk_ehashfn() to test both source and destination addresses, but then faced various problems, including user-space programs like packetdrill that had similar assumptions. Instead of trying to fix the whole ecosystem, it is better to admit that we have a dual stack behavior, and that we can not build linux kernels without V4 stack anyway. The dual stack API automatically forces the traffic to be IPv4 if v4mapped addresses are used at bind() or connect(), so it makes no sense to allow IPv6 traffic to use the same v4mapped class. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01netfilter: drop bridge nf reset from nf_resetFlorian Westphal1-1/+1
commit 174e23810cd31 ("sk_buff: drop all skb extensions on free and skb scrubbing") made napi recycle always drop skb extensions. The additional skb_ext_del() that is performed via nf_reset on napi skb recycle is not needed anymore. Most nf_reset() calls in the stack are there so queued skb won't block 'rmmod nf_conntrack' indefinitely. This removes the skb_ext_del from nf_reset, and renames it to a more fitting nf_reset_ct(). In a few selected places, add a call to skb_ext_reset to make sure that no active extensions remain. I am submitting this for "net", because we're still early in the release cycle. The patch applies to net-next too, but I think the rename causes needless divergence between those trees. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-08-24net: ipv6: fix listify ip6_rcv_finish in case of forwardingXin Long1-1/+3
We need a similar fix for ipv6 as Commit 0761680d5215 ("net: ipv4: fix listify ip_rcv_finish in case of forwarding") does for ipv4. This issue can be reprocuded by syzbot since Commit 323ebb61e32b ("net: use listified RX for handling GRO_NORMAL skbs") on net-next. The call trace was: kernel BUG at include/linux/skbuff.h:2225! RIP: 0010:__skb_pull include/linux/skbuff.h:2225 [inline] RIP: 0010:skb_pull+0xea/0x110 net/core/skbuff.c:1902 Call Trace: sctp_inq_pop+0x2f1/0xd80 net/sctp/inqueue.c:202 sctp_endpoint_bh_rcv+0x184/0x8d0 net/sctp/endpointola.c:385 sctp_inq_push+0x1e4/0x280 net/sctp/inqueue.c:80 sctp_rcv+0x2807/0x3590 net/sctp/input.c:256 sctp6_rcv+0x17/0x30 net/sctp/ipv6.c:1049 ip6_protocol_deliver_rcu+0x2fe/0x1660 net/ipv6/ip6_input.c:397 ip6_input_finish+0x84/0x170 net/ipv6/ip6_input.c:438 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip6_input+0xe4/0x3f0 net/ipv6/ip6_input.c:447 dst_input include/net/dst.h:442 [inline] ip6_sublist_rcv_finish+0x98/0x1e0 net/ipv6/ip6_input.c:84 ip6_list_rcv_finish net/ipv6/ip6_input.c:118 [inline] ip6_sublist_rcv+0x80c/0xcf0 net/ipv6/ip6_input.c:282 ipv6_list_rcv+0x373/0x4b0 net/ipv6/ip6_input.c:316 __netif_receive_skb_list_ptype net/core/dev.c:5049 [inline] __netif_receive_skb_list_core+0x5fc/0x9d0 net/core/dev.c:5097 __netif_receive_skb_list net/core/dev.c:5149 [inline] netif_receive_skb_list_internal+0x7eb/0xe60 net/core/dev.c:5244 gro_normal_list.part.0+0x1e/0xb0 net/core/dev.c:5757 gro_normal_list net/core/dev.c:5755 [inline] gro_normal_one net/core/dev.c:5769 [inline] napi_frags_finish net/core/dev.c:5782 [inline] napi_gro_frags+0xa6a/0xea0 net/core/dev.c:5855 tun_get_user+0x2e98/0x3fa0 drivers/net/tun.c:1974 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2020 Fixes: d8269e2cbf90 ("net: ipv6: listify ipv6_rcv() and ip6_rcv_finish()") Fixes: 323ebb61e32b ("net: use listified RX for handling GRO_NORMAL skbs") Reported-by: syzbot+eb349eeee854e389c36d@syzkaller.appspotmail.com Reported-by: syzbot+4a0643a653ac375612d1@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-05net: use indirect calls helpers at early demux stagePaolo Abeni1-1/+4
So that we avoid another indirect call per RX packet, if early demux is enabled. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net: use indirect calls helpers for L3 handler hooksPaolo Abeni1-1/+6
So that we avoid another indirect call per RX packet in the common case. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
Several conflicts, seemingly all over the place. I used Stephen Rothwell's sample resolutions for many of these, if not just to double check my own work, so definitely the credit largely goes to him. The NFP conflict consisted of a bug fix (moving operations past the rhashtable operation) while chaning the initial argument in the function call in the moved code. The net/dsa/master.c conflict had to do with a bug fix intermixing of making dsa_master_set_mtu() static with the fixing of the tagging attribute location. cls_flower had a conflict because the dup reject fix from Or overlapped with the addition of port range classifiction. __set_phy_supported()'s conflict was relatively easy to resolve because Andrew fixed it in both trees, so it was just a matter of taking the net-next copy. Or at least I think it was :-) Joe Stringer's fix to the handling of netns id 0 in bpf_sk_lookup() intermixed with changes on how the sdif and caller_net are calculated in these code paths in net-next. The remaining BPF conflicts were largely about the addition of the __bpf_md_ptr stuff in 'net' overlapping with adjustments and additions to the relevant data structure where the MD pointer macros are used. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-06net: use skb_list_del_init() to remove from RX sublistsEdward Cree1-2/+2
list_del() leaves the skb->next pointer poisoned, which can then lead to a crash in e.g. OVS forwarding. For example, setting up an OVS VXLAN forwarding bridge on sfc as per: ======== $ ovs-vsctl show 5dfd9c47-f04b-4aaa-aa96-4fbb0a522a30 Bridge "br0" Port "br0" Interface "br0" type: internal Port "enp6s0f0" Interface "enp6s0f0" Port "vxlan0" Interface "vxlan0" type: vxlan options: {key="1", local_ip="10.0.0.5", remote_ip="10.0.0.4"} ovs_version: "2.5.0" ======== (where 10.0.0.5 is an address on enp6s0f1) and sending traffic across it will lead to the following panic: ======== general protection fault: 0000 [#1] SMP PTI CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.20.0-rc3-ehc+ #701 Hardware name: Dell Inc. PowerEdge R710/0M233H, BIOS 6.4.0 07/23/2013 RIP: 0010:dev_hard_start_xmit+0x38/0x200 Code: 53 48 89 fb 48 83 ec 20 48 85 ff 48 89 54 24 08 48 89 4c 24 18 0f 84 ab 01 00 00 48 8d 86 90 00 00 00 48 89 f5 48 89 44 24 10 <4c> 8b 33 48 c7 03 00 00 00 00 48 8b 05 c7 d1 b3 00 4d 85 f6 0f 95 RSP: 0018:ffff888627b437e0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: dead000000000100 RCX: ffff88862279c000 RDX: ffff888614a342c0 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff888618a88000 R08: 0000000000000001 R09: 00000000000003e8 R10: 0000000000000000 R11: ffff888614a34140 R12: 0000000000000000 R13: 0000000000000062 R14: dead000000000100 R15: ffff888616430000 FS: 0000000000000000(0000) GS:ffff888627b40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6d2bc6d000 CR3: 000000000200a000 CR4: 00000000000006e0 Call Trace: <IRQ> __dev_queue_xmit+0x623/0x870 ? masked_flow_lookup+0xf7/0x220 [openvswitch] ? ep_poll_callback+0x101/0x310 do_execute_actions+0xaba/0xaf0 [openvswitch] ? __wake_up_common+0x8a/0x150 ? __wake_up_common_lock+0x87/0xc0 ? queue_userspace_packet+0x31c/0x5b0 [openvswitch] ovs_execute_actions+0x47/0x120 [openvswitch] ovs_dp_process_packet+0x7d/0x110 [openvswitch] ovs_vport_receive+0x6e/0xd0 [openvswitch] ? dst_alloc+0x64/0x90 ? rt_dst_alloc+0x50/0xd0 ? ip_route_input_slow+0x19a/0x9a0 ? __udp_enqueue_schedule_skb+0x198/0x1b0 ? __udp4_lib_rcv+0x856/0xa30 ? __udp4_lib_rcv+0x856/0xa30 ? cpumask_next_and+0x19/0x20 ? find_busiest_group+0x12d/0xcd0 netdev_frame_hook+0xce/0x150 [openvswitch] __netif_receive_skb_core+0x205/0xae0 __netif_receive_skb_list_core+0x11e/0x220 netif_receive_skb_list+0x203/0x460 ? __efx_rx_packet+0x335/0x5e0 [sfc] efx_poll+0x182/0x320 [sfc] net_rx_action+0x294/0x3c0 __do_softirq+0xca/0x297 irq_exit+0xa6/0xb0 do_IRQ+0x54/0xd0 common_interrupt+0xf/0xf </IRQ> ======== So, in all listified-receive handling, instead pull skbs off the lists with skb_list_del_init(). Fixes: 9af86f933894 ("net: core: fix use-after-free in __netif_receive_skb_list_core") Fixes: 7da517a3bc52 ("net: core: Another step of skb receive list processing") Fixes: a4ca8b7df73c ("net: ipv4: fix drop handling in ip_list_rcv() and ip_list_rcv_finish()") Fixes: d8269e2cbf90 ("net: ipv6: listify ipv6_rcv() and ip6_rcv_finish()") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08ipv6: factor out protocol delivery helperPaolo Abeni1-12/+16
So that we can re-use it at the UDP level in the next patch rfc v3 -> v1: - add the helper declaration into the ipv6 header Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08ipv6: handling of multicast packets received in VRFMike Manning1-3/+32
If the skb for multicast packets marked as enslaved to a VRF are received, then the secondary device index should be used to obtain the real device. And verify the multicast address against the enslaved rather than the l3mdev device. Signed-off-by: Dewi Morgan <morgand@vyatta.att-mail.com> Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20ipv6: Allow the l3mdev to be a loopbackRobert Shearman1-1/+2
There is no way currently for an IPv6 client connect using a loopback address in a VRF, whereas for IPv4 the loopback address can be added: $ sudo ip addr add dev vrfred 127.0.0.1/8 $ sudo ip -6 addr add ::1/128 dev vrfred RTNETLINK answers: Cannot assign requested address So allow ::1 to be configured on an L3 master device. In order for this to be usable ip_route_output_flags needs to not consider ::1 to be a link scope address (since oif == l3mdev and so it would be dropped), and ipv6_rcv needs to consider the l3mdev to be a loopback device so that it doesn't drop the packets. Signed-off-by: Robert Shearman <rshearma@vyatta.att-mail.com> Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-06net: ipv6: listify ipv6_rcv() and ip6_rcv_finish()Edward Cree1-16/+115
Essentially the same as the ipv4 equivalents. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17ipv6: Count interface receive statistics on the ingress netdevStephen Suryaputra1-1/+1
The statistics such as InHdrErrors should be counted on the ingress netdev rather than on the dev from the dst, which is the egress. Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+5
A function in kernel/bpf/syscall.c which got a bug fix in 'net' was moved to kernel/bpf/verifier.c in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17ipv6: drop non loopback packets claiming to originate from ::1Florian Westphal1-2/+5
We lack a saddr check for ::1. This causes security issues e.g. with acls permitting connections from ::1 because of assumption that these originate from local machine. Assuming a source address of ::1 is local seems reasonable. RFC4291 doesn't allow such a source address either, so drop such packets. Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net: Add sysctl to toggle early demux for tcp and udpsubashab@codeaurora.org1-2/+4
Certain system process significant unconnected UDP workload. It would be preferrable to disable UDP early demux for those systems and enable it for TCP only. By disabling UDP demux, we see these slight gains on an ARM64 system- 782 -> 788Mbps unconnected single stream UDPv4 633 -> 654Mbps unconnected UDPv4 different sources The performance impact can change based on CPU architecure and cache sizes. There will not much difference seen if entire UDP hash table is in cache. Both sysctls are enabled by default to preserve existing behavior. v1->v2: Change function pointer instead of adding conditional as suggested by Stephen. v2->v3: Read once in callers to avoid issues due to compiler optimizations. Also update commit message with the tests. v3->v4: Store and use read once result instead of querying pointer again incorrectly. v4->v5: Refactor to avoid errors due to compilation with IPV6={m,n} Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Suggested-by: Eric Dumazet <edumazet@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Tom Herbert <tom@herbertland.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08net: vrf: ipv6 support for local traffic to local addressesDavid Ahern1-0/+1
Add support for locally originated traffic to VRF-local IPv6 addresses. Similar to IPv4 a local dst is set on the skb and the packet is reinserted with a call to netif_rx. With this patch, ping, tcp and udp packets to a local IPv6 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping6 -c1 -I red 2100:1::1 ping6: Warning: source address might be selected on device other than red. PING 2100:1::1(2100:1::1) from 2100:1::1 red: 56 data bytes 64 bytes from 2100:1::1: icmp_seq=1 ttl=64 time=0.098 ms ip6_input is exported so the VRF driver can use it for the dst input function. The dst_alloc function for IPv4 defaults to setting the input and output functions; IPv6's does not. VRF does not need to duplicate the Rx path so just export the ipv6 input function. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-21ipv6: Change "final" protocol processing for encapsulationTom Herbert1-1/+14
When performing foo-over-UDP, UDP packets are processed by the encapsulation handler which returns another protocol to process. This may result in processing two (or more) protocols in the loop that are marked as INET6_PROTO_FINAL. The actions taken for hitting a final protocol, in particular the skb_postpull_rcsum can only be performed once. This patch set adds a check of a final protocol has been seen. The rules are: - If the final protocol has not been seen any protocol is processed (final and non-final). In the case of a final protocol, the final actions are taken (like the skb_postpull_rcsum) - If a final protocol has been seen (e.g. an encapsulating UDP header) then no further non-final protocols are allowed (e.g. extension headers). For more final protocols the final actions are not taken (e.g. skb_postpull_rcsum). Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-21ipv6: Fix nexthdr for reinjectionTom Herbert1-3/+15
In ip6_input_finish the nexthdr protocol is retrieved from the next header offset that is returned in the cb of the skb. This method does not work for UDP encapsulation that may not even have a concept of a nexthdr field (e.g. FOU). This patch checks for a final protocol (INET6_PROTO_FINAL) when a protocol handler returns > 0. If the protocol is not final then resubmission is performed on nhoff value. If the protocol is final then the nexthdr is taken to be the return value. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12net: l3mdev: Add hook in ip and ipv6David Ahern1-0/+7
Currently the VRF driver uses the rx_handler to switch the skb device to the VRF device. Switching the dev prior to the ip / ipv6 layer means the VRF driver has to duplicate IP/IPv6 processing which adds overhead and makes features such as retaining the ingress device index more complicated than necessary. This patch moves the hook to the L3 layer just after the first NF_HOOK for PRE_ROUTING. This location makes exposing the original ingress device trivial (next patch) and allows adding other NF_HOOKs to the VRF driver in the future. dev_queue_xmit_nit is exported so that the VRF driver can cycle the skb with the switched device through the packet taps to maintain current behavior (tcpdump can be used on either the vrf device or the enslaved devices). Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-28ipv6: rename IP6_UPD_PO_STATS_BH()Eric Dumazet1-2/+2
Rename IP6_UPD_PO_STATS_BH() to __IP6_UPD_PO_STATS() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-28ipv6: rename IP6_INC_STATS_BH()Eric Dumazet1-14/+14
Rename IP6_INC_STATS_BH() to __IP6_INC_STATS() and IP6_ADD_STATS_BH() to __IP6_ADD_STATS() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17ipv4: namespacify ip_early_demux sysctl knobNikolay Borisov1-1/+1
Signed-off-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11ipv6: add option to drop unicast encapsulated in L2 multicastJohannes Berg1-0/+10
In order to solve a problem with 802.11, the so-called hole-196 attack, add an option (sysctl) called "drop_unicast_in_l2_multicast" which, if enabled, causes the stack to drop IPv6 unicast packets encapsulated in link-layer multi- or broadcast frames. Such frames can (as an attack) be created by any member of the same wireless network and transmitted as valid encrypted frames since the symmetric key for broadcast frames is shared between all stations. Reviewed-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-18netfilter: Pass net into okfnEric W. Biederman1-3/+2
This is immediately motivated by the bridge code that chains functions that call into netfilter. Without passing net into the okfns the bridge code would need to guess about the best expression for the network namespace to process packets in. As net is frequently one of the first things computed in continuation functions after netfilter has done it's job passing in the desired network namespace is in many cases a code simplification. To support this change the function dst_output_okfn is introduced to simplify passing dst_output as an okfn. For the moment dst_output_okfn just silently drops the struct net. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-18netfilter: Pass struct net into the netfilter hooksEric W. Biederman1-4/+4
Pass a network namespace parameter into the netfilter hooks. At the call site of the netfilter hooks the path a packet is taking through the network stack is well known which allows the network namespace to be easily and reliabily. This allows the replacement of magic code like "dev_net(state->in?:state->out)" that appears at the start of most netfilter hooks with "state->net". In almost all cases the network namespace passed in is derived from the first network device passed in, guaranteeing those paths will not see any changes in practice. The exceptions are: xfrm/xfrm_output.c:xfrm_output_resume() xs_net(skb_dst(skb)->xfrm) ipvs/ip_vs_xmit.c:ip_vs_nat_send_or_cont() ip_vs_conn_net(cp) ipvs/ip_vs_xmit.c:ip_vs_send_or_cont() ip_vs_conn_net(cp) ipv4/raw.c:raw_send_hdrinc() sock_net(sk) ipv6/ip6_output.c:ip6_xmit() sock_net(sk) ipv6/ndisc.c:ndisc_send_skb() dev_net(skb->dev) not dev_net(dst->dev) ipv6/raw.c:raw6_send_hdrinc() sock_net(sk) br_netfilter_hooks.c:br_nf_pre_routing_finish() dev_net(skb->dev) before skb->dev is set to nf_bridge->physindev In all cases these exceptions seem to be a better expression for the network namespace the packet is being processed in then the historic "dev_net(in?in:out)". I am documenting them in case something odd pops up and someone starts trying to track down what happened. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-18ipv6: Don't recompute net in ip6_rcvEric W. Biederman1-1/+1
Avoid silly redundant code Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27ipv6: fix crash over flow-based vxlan deviceWei-Chun Chao1-2/+3
Similar check was added in ip_rcv but not in ipv6_rcv. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81734e0a>] ipv6_rcv+0xfa/0x500 Call Trace: [<ffffffff816c9786>] ? ip_rcv+0x296/0x400 [<ffffffff817732d2>] ? packet_rcv+0x52/0x410 [<ffffffff8168e99f>] __netif_receive_skb_core+0x63f/0x9a0 [<ffffffffc02b34a0>] ? br_handle_frame_finish+0x580/0x580 [bridge] [<ffffffff8109912c>] ? update_rq_clock.part.81+0x1c/0x40 [<ffffffff8168ed18>] __netif_receive_skb+0x18/0x60 [<ffffffff8168fa1f>] process_backlog+0x9f/0x150 Fixes: ee122c79d422 (vxlan: Flow based tunneling) Signed-off-by: Wei-Chun Chao <weichunc@plumgrid.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-03ipv6: Make MLD packets to only be processed locallyAngga1-3/+3
Before commit daad151263cf ("ipv6: Make ipv6_is_mld() inline and use it from ip6_mc_input().") MLD packets were only processed locally. After the change, a copy of MLD packet goes through ip6_mr_input, causing MRT6MSG_NOCACHE message to be generated to user space. Make MLD packet only processed locally. Fixes: daad151263cf ("ipv6: Make ipv6_is_mld() inline and use it from ip6_mc_input().") Signed-off-by: Hermin Anggawijaya <hermin.anggawijaya@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11Revert "ipv6: Fix protocol resubmission"David S. Miller1-5/+3
This reverts commit 0243508edd317ff1fa63b495643a7c192fbfcd92. It introduces new regressions. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-08ipv6: Fix protocol resubmissionJosh Hunt1-3/+5
UDP encapsulation is broken on IPv6. This is because the logic to resubmit the nexthdr is inverted, checking for a ret value > 0 instead of < 0. Also, the resubmit label is in the wrong position since we already get the nexthdr value when performing decapsulation. In addition the skb pull is no longer necessary either. This changes the return value check to look for < 0, using it for the nexthdr on the next iteration, and moves the resubmit label to the proper location. With these changes the v6 code now matches what we do in the v4 ip input code wrt resubmitting when decapsulating. Signed-off-by: Josh Hunt <johunt@akamai.com> Acked-by: "Tom Herbert" <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-07netfilter: Pass socket pointer down through okfn().David Miller1-5/+6
On the output paths in particular, we have to sometimes deal with two socket contexts. First, and usually skb->sk, is the local socket that generated the frame. And second, is potentially the socket used to control a tunneling socket, such as one the encapsulates using UDP. We do not want to disassociate skb->sk when encapsulating in order to fix this, because that would break socket memory accounting. The most extreme case where this can cause huge problems is an AF_PACKET socket transmitting over a vxlan device. We hit code paths doing checks that assume they are dealing with an ipv4 socket, but are actually operating upon the AF_PACKET one. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ipv6: coding style: comparison for inequality with NULLIan Morris1-1/+1
The ipv6 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x != NULL and sometimes as x. x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-24ipv6: coding style improvements (remove assignment in if statements)Ian Morris1-1/+2
This change has no functional impact and simply addresses some coding style issues detected by checkpatch. Specifically this change adjusts "if" statements which also include the assignment of a variable. No changes to the resultant object files result as determined by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-25ipv6: White-space cleansing : Line LayoutsIan Morris1-3/+3
This patch makes no changes to the logic of the code but simply addresses coding style issues as detected by checkpatch. Both objdump and diff -w show no differences. A number of items are addressed in this patch: * Multiple spaces converted to tabs * Spaces before tabs removed. * Spaces in pointer typing cleansed (char *)foo etc. * Remove space after sizeof * Ensure spacing around comparators such as if statements. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-28net: Fix memory leak if TPROXY used with TCP early demuxHolger Eitzenberger1-1/+1
I see a memory leak when using a transparent HTTP proxy using TPROXY together with TCP early demux and Kernel v3.8.13.15 (Ubuntu stable): unreferenced object 0xffff88008cba4a40 (size 1696): comm "softirq", pid 0, jiffies 4294944115 (age 8907.520s) hex dump (first 32 bytes): 0a e0 20 6a 40 04 1b 37 92 be 32 e2 e8 b4 00 00 .. j@..7..2..... 02 00 07 01 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff810b710a>] kmem_cache_alloc+0xad/0xb9 [<ffffffff81270185>] sk_prot_alloc+0x29/0xc5 [<ffffffff812702cf>] sk_clone_lock+0x14/0x283 [<ffffffff812aaf3a>] inet_csk_clone_lock+0xf/0x7b [<ffffffff8129a893>] netlink_broadcast+0x14/0x16 [<ffffffff812c1573>] tcp_create_openreq_child+0x1b/0x4c3 [<ffffffff812c033e>] tcp_v4_syn_recv_sock+0x38/0x25d [<ffffffff812c13e4>] tcp_check_req+0x25c/0x3d0 [<ffffffff812bf87a>] tcp_v4_do_rcv+0x287/0x40e [<ffffffff812a08a7>] ip_route_input_noref+0x843/0xa55 [<ffffffff812bfeca>] tcp_v4_rcv+0x4c9/0x725 [<ffffffff812a26f4>] ip_local_deliver_finish+0xe9/0x154 [<ffffffff8127a927>] __netif_receive_skb+0x4b2/0x514 [<ffffffff8127aa77>] process_backlog+0xee/0x1c5 [<ffffffff8127c949>] net_rx_action+0xa7/0x200 [<ffffffff81209d86>] add_interrupt_randomness+0x39/0x157 But there are many more, resulting in the machine going OOM after some days. From looking at the TPROXY code, and with help from Florian, I see that the memory leak is introduced in tcp_v4_early_demux(): void tcp_v4_early_demux(struct sk_buff *skb) { /* ... */ iph = ip_hdr(skb); th = tcp_hdr(skb); if (th->doff < sizeof(struct tcphdr) / 4) return; sk = __inet_lookup_established(dev_net(skb->dev), &tcp_hashinfo, iph->saddr, th->source, iph->daddr, ntohs(th->dest), skb->skb_iif); if (sk) { skb->sk = sk; where the socket is assigned unconditionally to skb->sk, also bumping the refcnt on it. This is problematic, because in our case the skb has already a socket assigned in the TPROXY target. This then results in the leak I see. The very same issue seems to be with IPv6, but haven't tested. Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09net: add SNMP counters tracking incoming ECN bitsEric Dumazet1-1/+5
With GRO/LRO processing, there is a problem because Ip[6]InReceives SNMP counters do not count the number of frames, but number of aggregated segments. Its probably too late to change this now. This patch adds four new counters, tracking number of frames, regardless of LRO/GRO, and on a per ECN status basis, for IPv4 and IPv6. Ip[6]NoECTPkts : Number of packets received with NOECT Ip[6]ECT1Pkts : Number of packets received with ECT(1) Ip[6]ECT0Pkts : Number of packets received with ECT(0) Ip[6]CEPkts : Number of packets received with Congestion Experienced lph37:~# nstat | egrep "Pkts|InReceive" IpInReceives 1634137 0.0 Ip6InReceives 3714107 0.0 Ip6InNoECTPkts 19205 0.0 Ip6InECT0Pkts 52651828 0.0 IpExtInNoECTPkts 33630 0.0 IpExtInECT0Pkts 15581379 0.0 IpExtInCEPkts 6 0.0 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-29ipv6: don't accept node local multicast traffic from the wireHannes Frederic Sowa1-0/+12
Erik Hugne's errata proposal (Errata ID: 3480) to RFC4291 has been verified: http://www.rfc-editor.org/errata_search.php?eid=3480 We have to check for pkt_type and loopback flag because either the packets are allowed to travel over the loopback interface (in which case pkt_type is PACKET_HOST and IFF_LOOPBACK flag is set) or they travel over a non-loopback interface back to us (in which case PACKET_TYPE is PACKET_LOOPBACK and IFF_LOOPBACK flag is not set). Cc: Erik Hugne <erik.hugne@ericsson.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-08ipv6: stop multicast forwarding to process interface scoped addressesHannes Frederic Sowa1-1/+2
v2: a) used struct ipv6_addr_props v3: a) reverted changes for ipv6_addr_props v4: a) do not use __ipv6_addr_needs_scope_id Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-02ipv[4|6]: correct dropwatch false positive in local_deliver_finishNeil Horman1-2/+4
I had a report recently of a user trying to use dropwatch to localise some frame loss, and they were getting false positives. Turned out they were using a user space SCTP stack that used raw sockets to grab frames. When we don't have a registered protocol for a given packet, we record it as a drop, even if a raw socket receieves the frame. We should only record the drop in the event a raw socket doesnt exist to receive the frames Tested by the reported successfully Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: William Reich <reich@ulticom.com> Tested-by: William Reich <reich@ulticom.com> CC: "David S. Miller" <davem@davemloft.net> CC: William Reich <reich@ulticom.com> CC: eric.dumazet@gmail.com Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-11ipv6: don't accept multicast traffic with scope 0Hannes Frederic Sowa1-0/+9
v2: a) moved before multicast source address check b) changed comment to netdev style Cc: Erik Hugne <erik.hugne@ericsson.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14ipv6: Store Router Alert option in IP6CB directly.YOSHIFUJI Hideaki / 吉藤英明1-3/+2
Router Alert option is very small and we can store the value itself in the skb. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14ipv6: Make ipv6_is_mld() inline and use it from ip6_mc_input().YOSHIFUJI Hideaki / 吉藤英明1-18/+3
Move generalized version of ipv6_is_mld() to header, and use it from ip6_mc_input(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-31net: TCP early demux cleanupEric Dumazet1-2/+0
early_demux() handlers should be called in RCU context, and as we use skb_dst_set_noref(skb, dst), caller must not exit from RCU context before dst use (skb_dst(skb)) or release (skb_drop(dst)) Therefore, rcu_read_lock()/rcu_read_unlock() pairs around ->early_demux() are confusing and not needed : Protocol handlers are already in an RCU read lock section. (__netif_receive_skb() does the rcu_read_lock() ) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-27ipv6: Early TCP socket demuxEric Dumazet1-2/+11
This is the IPv6 missing bits for infrastructure added in commit 41063e9dd1195 (ipv4: Early TCP socket demux.) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>