summaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)AuthorFilesLines
2019-03-23mac80211: don't initiate TDLS connection if station is not associated to APBalaji Pothunoori1-0/+4
[ Upstream commit 7ed5285396c257fd4070b1e29e7b2341aae2a1ce ] Following call trace is observed while adding TDLS peer entry in driver during TDLS setup. Call Trace: [<c1301476>] dump_stack+0x47/0x61 [<c10537d2>] __warn+0xe2/0x100 [<fa22415f>] ? sta_apply_parameters+0x49f/0x550 [mac80211] [<c1053895>] warn_slowpath_null+0x25/0x30 [<fa22415f>] sta_apply_parameters+0x49f/0x550 [mac80211] [<fa20ad42>] ? sta_info_alloc+0x1c2/0x450 [mac80211] [<fa224623>] ieee80211_add_station+0xe3/0x160 [mac80211] [<c1876fe3>] nl80211_new_station+0x273/0x420 [<c170f6d9>] genl_rcv_msg+0x219/0x3c0 [<c170f4c0>] ? genl_rcv+0x30/0x30 [<c170ee7e>] netlink_rcv_skb+0x8e/0xb0 [<c170f4ac>] genl_rcv+0x1c/0x30 [<c170e8aa>] netlink_unicast+0x13a/0x1d0 [<c170ec18>] netlink_sendmsg+0x2d8/0x390 [<c16c5acd>] sock_sendmsg+0x2d/0x40 [<c16c6369>] ___sys_sendmsg+0x1d9/0x1e0 Fixing this by allowing TDLS setup request only when we have completed association. Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-23mac80211: fix miscounting of ttl-dropped framesBob Copeland1-1/+3
[ Upstream commit a0dc02039a2ee54fb4ae400e0b755ed30e73e58c ] In ieee80211_rx_h_mesh_fwding, we increment the 'dropped_frames_ttl' counter when we decrement the ttl to zero. For unicast frames destined for other hosts, we stop processing the frame at that point. For multicast frames, we do not rebroadcast it in this case, but we do pass the frame up the stack to process it on this STA. That doesn't match the usual definition of "dropped," so don't count those as such. With this change, something like `ping6 -i0.2 ff02::1%mesh0` from a peer in a ttl=1 network no longer increments the counter rapidly. Signed-off-by: Bob Copeland <bobcopeland@fb.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-13mac80211: fix reordering of buffered broadcast packetsFelix Fietkau1-2/+2
commit 9ec1190d065998650fd9260dea8cf3e1f56c0e8c upstream. If the buffered broadcast queue contains packets, letting new packets bypass that queue can lead to heavy reordering, since the driver is probably throttling transmission of buffered multicast packets after beacons. Keep buffering packets until the buffer has been cleared (and no client is in powersave mode). Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13mac80211: Clear beacon_int in ieee80211_do_stopBen Greear1-0/+2
commit 5c21e8100dfd57c806e833ae905e26efbb87840f upstream. This fixes stale beacon-int values that would keep a netdev from going up. To reproduce: Create two VAP on one radio. vap1 has beacon-int 100, start it. vap2 has beacon-int 240, start it (and it will fail because beacon-int mismatch). reconfigure vap2 to have beacon-int 100 and start it. It will fail because the stale beacon-int 240 will be used in the ifup path and hostapd never gets a chance to set the new beacon interval. Cc: stable@vger.kernel.org Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13mac80211: fix setting IEEE80211_KEY_FLAG_RX_MGMT for AP mode keysFelix Fietkau1-1/+1
commit 211710ca74adf790b46ab3867fcce8047b573cd1 upstream. key->sta is only valid after ieee80211_key_link, which is called later in this function. Because of that, the IEEE80211_KEY_FLAG_RX_MGMT is never set when management frame protection is enabled. Fixes: e548c49e6dc6b ("mac80211: add key flag for management keys") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13mac80211: shorten the IBSS debug messagesEmmanuel Grumbach1-11/+11
[ Upstream commit c6e57b3896fc76299913b8cfd82d853bee8a2c84 ] When tracing is enabled, all the debug messages are recorded and must not exceed MAX_MSG_LEN (100) columns. Longer debug messages grant the user with: WARNING: CPU: 3 PID: 32642 at /tmp/wifi-core-20180806094828/src/iwlwifi-stack-dev/net/mac80211/./trace_msg.h:32 trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211] Workqueue: phy1 ieee80211_iface_work [mac80211] RIP: 0010:trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211] Call Trace: __sdata_dbg+0xbd/0x120 [mac80211] ieee80211_ibss_rx_queued_mgmt+0x15f/0x510 [mac80211] ieee80211_iface_work+0x21d/0x320 [mac80211] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13mac80211: Fix station bandwidth setting after channel switchIlan Peer1-0/+53
[ Upstream commit 0007e94355fdb71a1cf5dba0754155cba08f0666 ] When performing a channel switch flow for a managed interface, the flow did not update the bandwidth of the AP station and the rate scale algorithm. In case of a channel width downgrade, this would result with the rate scale algorithm using a bandwidth that does not match the interface channel configuration. Fix this by updating the AP station bandwidth and rate scaling algorithm before the actual channel change in case of a bandwidth downgrade, or after the actual channel change in case of a bandwidth upgrade. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13mac80211: fix a race between restart and CSA flowsEmmanuel Grumbach1-1/+20
[ Upstream commit f3ffb6c3a28963657eb8b02a795d75f2ebbd5ef4 ] We hit a problem with iwlwifi that was caused by a bug in mac80211. A bug in iwlwifi caused the firwmare to crash in certain cases in channel switch. Because of that bug, drv_pre_channel_switch would fail and trigger the restart flow. Now we had the hw restart worker which runs on the system's workqueue and the csa_connection_drop_work worker that runs on mac80211's workqueue that can run together. This is obviously problematic since the restart work wants to reconfigure the connection, while the csa_connection_drop_work worker does the exact opposite: it tries to disconnect. Fix this by cancelling the csa_connection_drop_work worker in the restart worker. Note that this can sound racy: we could have: driver iface_work CSA_work restart_work +++++++++++++++++++++++++++++++++++++++++++++ | <--drv_cs ---| <FW CRASH!> -CS FAILED--> | | | cancel_work(CSA) schedule | CSA work | | | Race between those 2 But this is not possible because we flush the workqueue in the restart worker before we cancel the CSA worker. That would be bullet proof if we could guarantee that we schedule the CSA worker only from the iface_work which runs on the workqueue (and not on the system's workqueue), but unfortunately we do have an instance in which we schedule the CSA work outside the context of the workqueue (ieee80211_chswitch_done). Note also that we should probably cancel other workers like beacon_connection_loss_work and possibly others for different types of interfaces, at the very least, IBSS should suffer from the exact same problem, but for now, do the minimum to fix the actual bug that was actually experienced and reproduced. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13mac80211: correct use of IEEE80211_VHT_CAP_RXSTBC_XDanek Duvall1-4/+1
[ Upstream commit 67d1ba8a6dc83d90cd58b89fa6cbf9ae35a0cf7f ] The mod mask for VHT capabilities intends to say that you can override the number of STBC receive streams, and it does, but only by accident. The IEEE80211_VHT_CAP_RXSTBC_X aren't bits to be set, but values (albeit left-shifted). ORing the bits together gets the right answer, but we should use the _MASK macro here instead. Signed-off-by: Danek Duvall <duvall@comfychair.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26mac80211: restrict delayed tailroom needed decrementManikanta Pubbisetty2-10/+16
[ Upstream commit 133bf90dbb8b873286f8ec2e81ba26e863114b8c ] As explained in ieee80211_delayed_tailroom_dec(), during roam, keys of the old AP will be destroyed and new keys will be installed. Deletion of the old key causes crypto_tx_tailroom_needed_cnt to go from 1 to 0 and the new key installation causes a transition from 0 to 1. Whenever crypto_tx_tailroom_needed_cnt transitions from 0 to 1, we invoke synchronize_net(); the reason for doing this is to avoid a race in the TX path as explained in increment_tailroom_need_count(). This synchronize_net() operation can be slow and can affect the station roam time. To avoid this, decrementing the crypto_tx_tailroom_needed_cnt is delayed for a while so that upon installation of new key the transition would be from 1 to 2 instead of 0 to 1 and thereby improving the roam time. This is all correct for a STA iftype, but deferring the tailroom_needed decrement for other iftypes may be unnecessary. For example, let's consider the case of a 4-addr client connecting to an AP for which AP_VLAN interface is also created, let the initial value for tailroom_needed on the AP be 1. * 4-addr client connects to the AP (AP: tailroom_needed = 1) * AP will clear old keys, delay decrement of tailroom_needed count * AP_VLAN is created, it takes the tailroom count from master (AP_VLAN: tailroom_needed = 1, AP: tailroom_needed = 1) * Install new key for the station, assume key is plumbed in the HW, there won't be any change in tailroom_needed count on AP iface * Delayed decrement of tailroom_needed count on AP (AP: tailroom_needed = 0, AP_VLAN: tailroom_needed = 1) Because of the delayed decrement on AP iface, tailroom_needed count goes out of sync between AP(master iface) and AP_VLAN(slave iface) and there would be unnecessary tailroom created for the packets going through AP_VLAN iface. Also, WARN_ONs were observed while trying to bring down the AP_VLAN interface: (warn_slowpath_common) (warn_slowpath_null+0x18/0x20) (warn_slowpath_null) (ieee80211_free_keys+0x114/0x1e4) (ieee80211_free_keys) (ieee80211_del_virtual_monitor+0x51c/0x850) (ieee80211_del_virtual_monitor) (ieee80211_stop+0x30/0x3c) (ieee80211_stop) (__dev_close_many+0x94/0xb8) (__dev_close_many) (dev_close_many+0x5c/0xc8) Restricting delayed decrement to station interface alone fixes the problem and it makes sense to do so because delayed decrement is done to improve roam time which is applicable only for client devices. Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05mac80211: add stations tied to AP_VLANs during hw reconfigmpubbise@codeaurora.org1-1/+2
[ Upstream commit 19103a4bfb42f320395daa5616ece3e89e759d63 ] As part of hw reconfig, only stations linked to AP interfaces are added back to the driver ignoring those which are tied to AP_VLAN interfaces. It is true that there could be stations tied to the AP_VLAN interface while serving 4addr clients or when using AP_VLAN for VLAN operations; we should be adding these stations back to the driver as part of hw reconfig, failing to do so can cause functional issues. In the case of ath10k driver, the following errors were observed. ath10k_pci : failed to install key for non-existent peer XX:XX:XX:XX:XX:XX Workqueue: events_freezable ieee80211_restart_work [mac80211] (unwind_backtrace) from (show_stack+0x10/0x14) (show_stack) (dump_stack+0x80/0xa0) (dump_stack) (warn_slowpath_common+0x68/0x8c) (warn_slowpath_common) (warn_slowpath_null+0x18/0x20) (warn_slowpath_null) (ieee80211_enable_keys+0x88/0x154 [mac80211]) (ieee80211_enable_keys) (ieee80211_reconfig+0xc90/0x19c8 [mac80211]) (ieee80211_reconfig]) (ieee80211_restart_work+0x8c/0xa0 [mac80211]) (ieee80211_restart_work) (process_one_work+0x284/0x488) (process_one_work) (worker_thread+0x228/0x360) (worker_thread) (kthread+0xd8/0xec) (kthread) (ret_from_fork+0x14/0x24) Also while bringing down the AP VAP, WARN_ONs and errors related to peer removal were observed. ath10k_pci : failed to clear all peer wep keys for vdev 0: -2 ath10k_pci : failed to disassociate station: 8c:fd:f0:0a:8c:f5 vdev 0: -2 (unwind_backtrace) (show_stack+0x10/0x14) (show_stack) (dump_stack+0x80/0xa0) (dump_stack) (warn_slowpath_common+0x68/0x8c) (warn_slowpath_common) (warn_slowpath_null+0x18/0x20) (warn_slowpath_null) (sta_set_sinfo+0xb98/0xc9c [mac80211]) (sta_set_sinfo [mac80211]) (__sta_info_flush+0xf0/0x134 [mac80211]) (__sta_info_flush [mac80211]) (ieee80211_stop_ap+0xe8/0x390 [mac80211]) (ieee80211_stop_ap [mac80211]) (__cfg80211_stop_ap+0xe0/0x3dc [cfg80211]) (__cfg80211_stop_ap [cfg80211]) (cfg80211_stop_ap+0x30/0x44 [cfg80211]) (cfg80211_stop_ap [cfg80211]) (genl_rcv_msg+0x274/0x30c) (genl_rcv_msg) (netlink_rcv_skb+0x58/0xac) (netlink_rcv_skb) (genl_rcv+0x20/0x34) (genl_rcv) (netlink_unicast+0x11c/0x204) (netlink_unicast) (netlink_sendmsg+0x30c/0x370) (netlink_sendmsg) (sock_sendmsg+0x70/0x84) (sock_sendmsg) (___sys_sendmsg.part.3+0x188/0x228) (___sys_sendmsg.part.3) (__sys_sendmsg+0x4c/0x70) (__sys_sendmsg) (ret_fast_syscall+0x0/0x44) These issues got fixed by adding the stations which are tied to AP_VLANs back to the driver. Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03mac80211: Adjust SAE authentication timeoutIlan Peer1-7/+18
[ Upstream commit 407879b690ba3a6bf29be896d02dad63463bd1c0 ] The IEEE P802.11-REVmd D1.0 specification updated the SAE authentication timeout to be 2000 milliseconds (see dot11RSNASAERetransPeriod). Update the SAE timeout setting accordingly. While at it, reduce some code duplication in the timeout configuration. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13mac80211: bail out from prep_connection() if a reconfig is ongoingLuca Coelho1-0/+4
[ Upstream commit f8860ce836f2d502b07ef99559707fe55d90f5bc ] If ieee80211_hw_restart() is called during authentication, the authentication process will continue, causing the driver to be called in a wrong state. This ultimately causes an oops in the iwlwifi driver (at least). This fixes bugzilla 195299 partly. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195299 Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24mac80211: don't parse encrypted management frames in ieee80211_frame_ackedEmmanuel Grumbach1-0/+1
[ Upstream commit cf147085fdda044622973a12e4e06f1c753ab677 ] ieee80211_frame_acked is called when a frame is acked by the peer. In case this is a management frame, we check if this an SMPS frame, in which case we can update our antenna configuration. When we parse the management frame we look at the category in case it is an action frame. That byte sits after the IV in case the frame was encrypted. This means that if the frame was encrypted, we basically look at the IV instead of looking at the category. It is then theorically possible that we think that an SMPS action frame was acked where really we had another frame that was encrypted. Since the only management frame whose ack needs to be tracked is the SMPS action frame, and that frame is not a robust management frame, it will never be encrypted. The easiest way to fix this problem is then to not look at frames that were encrypted. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-22mac80211: remove BUG() when interface type is invalidLuca Coelho1-1/+1
[ Upstream commit c7976f5272486e4ff406014c4b43e2fa3b70b052 ] In the ieee80211_setup_sdata() we check if the interface type is valid and, if not, call BUG(). This should never happen, but if there is something wrong with the code, it will not be caught until the bug happens when an interface is being set up. Calling BUG() is too extreme for this and a WARN_ON() would be better used instead. Change that. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28cfg80211: fix cfg80211_beacon_dupArnd Bergmann1-1/+1
commit bee92d06157fc39d5d7836a061c7d41289a55797 upstream. gcc-8 warns about some obviously incorrect code: net/mac80211/cfg.c: In function 'cfg80211_beacon_dup': net/mac80211/cfg.c:2896:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] From the context, I conclude that we want to copy from beacon into new_beacon, as we do in the rest of the function. Cc: stable@vger.kernel.org Fixes: 73da7d5bab79 ("mac80211: add channel switch command and beacon callbacks") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-07mac80211: fix the update of path metric for RANN frameChun-Yeow Yeoh1-6/+9
[ Upstream commit fbbdad5edf0bb59786a51b94a9d006bc8c2da9a2 ] The previous path metric update from RANN frame has not considered the own link metric toward the transmitting mesh STA. Fix this. Reported-by: Michael65535 Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20mac80211: Fix addition of mesh configuration elementIlan peer1-2/+0
commit 57629915d568c522ac1422df7bba4bee5b5c7a7c upstream. The code was setting the capabilities byte to zero, after it was already properly set previously. Fix it. The bug was found while debugging hwsim mesh tests failures that happened since the commit mentioned below. Fixes: 76f43b4c0a93 ("mac80211: Remove invalid flag operations in mesh TSF synchronization") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Cc: Richard Schütz <rschuetz@uni-koblenz.de> Cc: Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30mac80211: Suppress NEW_PEER_CANDIDATE event if no roomMasashi Honma1-6/+8
[ Upstream commit 11197d006bcfabf0173a7820a163fcaac420d10e ] Previously, kernel sends NEW_PEER_CANDIDATE event to user land even if the found peer does not have any room to accept other peer. This causes continuous connection trials. Signed-off-by: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30mac80211: Remove invalid flag operations in mesh TSF synchronizationMasashi Honma3-15/+0
[ Upstream commit 76f43b4c0a9337af22827d78de4f2b8fd5328489 ] mesh_sync_offset_adjust_tbtt() implements Extensible synchronization framework ([1] 13.13.2 Extensible synchronization framework). It shall not operate the flag "TBTT Adjusting subfield" ([1] 8.4.2.100.8 Mesh Capability), since it is used only for MBCA ([1] 13.13.4 Mesh beacon collision avoidance, see 13.13.4.4.3 TBTT scanning and adjustment procedures for detail). So this patch remove the flag operations. [1] IEEE Std 802.11 2012 Signed-off-by: Masashi Honma <masashi.honma@gmail.com> [remove adjusting_tbtt entirely, since it's now unused] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-18mac80211: don't compare TKIP TX MIC key in reinstall preventionJohannes Berg1-2/+34
commit cfbb0d90a7abb289edc91833d0905931f8805f12 upstream. For the reinstall prevention, the code I had added compares the whole key. It turns out though that iwlwifi firmware doesn't provide the TKIP TX MIC key as it's not needed in client mode, and thus the comparison will always return false. For client mode, thus always zero out the TX MIC key part before doing the comparison in order to avoid accepting the reinstall of the key with identical encryption and RX MIC key, but not the same TX MIC key (since the supplicant provides the real one.) Fixes: fdf7cb4185b6 ("mac80211: accept key reinstall without changing anything") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-18mac80211: use constant time comparison with keysJason A. Donenfeld1-1/+2
commit 2bdd713b92a9cade239d3c7d15205a09f556624d upstream. Otherwise we risk leaking information via timing side channel. Fixes: fdf7cb4185b6 ("mac80211: accept key reinstall without changing anything") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-18mac80211: accept key reinstall without changing anythingJohannes Berg1-3/+17
commit fdf7cb4185b60c68e1a75e61691c4afdc15dea0e upstream. When a key is reinstalled we can reset the replay counters etc. which can lead to nonce reuse and/or replay detection being impossible, breaking security properties, as described in the "KRACK attacks". In particular, CVE-2017-13080 applies to GTK rekeying that happened in firmware while the host is in D3, with the second part of the attack being done after the host wakes up. In this case, the wpa_supplicant mitigation isn't sufficient since wpa_supplicant doesn't know the GTK material. In case this happens, simply silently accept the new key coming from userspace but don't take any action on it since it's the same key; this keeps the PN replay counters intact. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-05mac80211: flush hw_roc_start work before cancelling the ROCAvraham Stern1-0/+2
commit 6e46d8ce894374fc135c96a8d1057c6af1fef237 upstream. When HW ROC is supported it is possible that after the HW notified that the ROC has started, the ROC was cancelled and another ROC was added while the hw_roc_start worker is waiting on the mutex (since cancelling the ROC and adding another one also holds the same mutex). As a result, the hw_roc_start worker will continue to run after the new ROC is added but before it is actually started by the HW. This may result in notifying userspace that the ROC has started before it actually does, or in case of management tx ROC, in an attempt to tx while not on the right channel. In addition, when the driver will notify mac80211 that the second ROC has started, mac80211 will warn that this ROC has already been notified. Fix this by flushing the hw_roc_start work before cancelling an ROC. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-29mac80211/wpa: use constant time memory comparison for MACsJason A. Donenfeld1-2/+3
commit 98c67d187db7808b1f3c95f2110dd4392d034182 upstream. Otherwise, we enable all sorts of forgeries via timing attack. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: linux-wireless@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-26mac80211: don't look at the PM bit of BAR framesEmmanuel Grumbach1-1/+5
commit 769dc04db3ed8484798aceb015b94deacc2ba557 upstream. When a peer sends a BAR frame with PM bit clear, we should not modify its PM state as madated by the spec in 802.11-20012 10.2.1.2. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-18mac80211: flush delayed work when entering suspendMatt Chen1-0/+1
commit a9e9200d8661c1a0be8c39f93deb383dc940de35 upstream. The issue was found when entering suspend and resume. It triggers a warning in: mac80211/key.c: ieee80211_enable_keys() ... WARN_ON_ONCE(sdata->crypto_tx_tailroom_needed_cnt || sdata->crypto_tx_tailroom_pending_dec); ... It points out sdata->crypto_tx_tailroom_pending_dec isn't cleaned up successfully in a delayed_work during suspend. Add a flush_delayed_work to fix it. Signed-off-by: Matt Chen <matt.chen@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-24mac80211: discard multicast and 4-addr A-MSDUsJohannes Berg1-9/+15
[ Upstream commit ea720935cf6686f72def9d322298bf7e9bd53377 ] In mac80211, multicast A-MSDUs are accepted in many cases that they shouldn't be accepted in: * drop A-MSDUs with a multicast A1 (RA), as required by the spec in 9.11 (802.11-2012 version) * drop A-MSDUs with a 4-addr header, since the fourth address can't actually be useful for them; unless 4-address frame format is actually requested, even though the fourth address is still not useful in this case, but ignored Accepting the first case, in particular, is very problematic since it allows anyone else with possession of a GTK to send unicast frames encapsulated in a multicast A-MSDU, even when the AP has client isolation enabled. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2016-09-01mac80211: fix purging multicast PS buffer queueFelix Fietkau2-4/+4
[ Upstream commit 6b07d9ca9b5363dda959b9582a3fc9c0b89ef3b5 ] The code currently assumes that buffered multicast PS frames don't have a pending ACK frame for tx status reporting. However, hostapd sends a broadcast deauth frame on teardown for which tx status is requested. This can lead to the "Have pending ack frames" warning on module reload. Fix this by using ieee80211_free_txskb/ieee80211_purge_tx_queue. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2016-07-12mac80211: fix unnecessary frame drops in mesh fwdingMichal Kazior1-2/+3
[ Upstream commit cf44012810ccdd8fd947518e965cb04b7b8498be ] The ieee80211_queue_stopped() expects hw queue number but it was given raw WMM AC number instead. This could cause frame drops and problems with traffic in some cases - most notably if driver doesn't map AC numbers to queue numbers 1:1 and uses ieee80211_stop_queues() and ieee80211_wake_queue() only without ever calling ieee80211_wake_queues(). On ath10k it was possible to hit this problem in the following case: 1. wlan0 uses queue 0 (ath10k maps queues per vif) 2. offchannel uses queue 15 3. queues 1-14 are unused 4. ieee80211_stop_queues() 5. ieee80211_wake_queue(q=0) 6. ieee80211_wake_queue(q=15) (other queues are not woken up because both driver and mac80211 know other queues are unused) 7. ieee80211_rx_h_mesh_fwding() 8. ieee80211_select_queue_80211() returns 2 9. ieee80211_queue_stopped(q=2) returns true 10. frame is dropped (oops!) Fixes: d3c1597b8d1b ("mac80211: fix forwarded mesh frame queue mapping") Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-06-20mac80211: mesh: flush mesh paths unconditionallyBob Copeland1-0/+4
[ Upstream commit fe7a7c57629e8dcbc0e297363a9b2366d67a6dc5 ] Currently, the mesh paths associated with a nexthop station are cleaned up in the following code path: __sta_info_destroy_part1 synchronize_net() __sta_info_destroy_part2 -> cleanup_single_sta -> mesh_sta_cleanup -> mesh_plink_deactivate -> mesh_path_flush_by_nexthop However, there are a couple of problems here: 1) the paths aren't flushed at all if the MPM is running in userspace (e.g. when using wpa_supplicant or authsae) 2) there is no synchronize_rcu between removing the path and readers accessing the nexthop, which means the following race is possible: CPU0 CPU1 ~~~~ ~~~~ sta_info_destroy_part1() synchronize_net() rcu_read_lock() mesh_nexthop_resolve() mpath = mesh_path_lookup() [...] -> mesh_path_flush_by_nexthop() sta = rcu_dereference( mpath->next_hop) kfree(sta) access sta <-- CRASH Fix both of these by unconditionally flushing paths before destroying the sta, and by adding a synchronize_net() after path flush to ensure no active readers can still dereference the sta. Fixes this crash: [ 348.529295] BUG: unable to handle kernel paging request at 00020040 [ 348.530014] IP: [<f929245d>] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] [ 348.530014] *pde = 00000000 [ 348.530014] Oops: 0000 [#1] PREEMPT [ 348.530014] Modules linked in: drbg ansi_cprng ctr ccm ppp_generic slhc ipt_MASQUERADE nf_nat_masquerade_ipv4 8021q ] [ 348.530014] CPU: 0 PID: 20597 Comm: wget Tainted: G O 4.6.0-rc5-wt=V1 #1 [ 348.530014] Hardware name: To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080016 11/07/2014 [ 348.530014] task: f64fa280 ti: f4f9c000 task.ti: f4f9c000 [ 348.530014] EIP: 0060:[<f929245d>] EFLAGS: 00010246 CPU: 0 [ 348.530014] EIP is at ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] [ 348.530014] EAX: f4ce63e0 EBX: 00000088 ECX: f3788416 EDX: 00020008 [ 348.530014] ESI: 00000000 EDI: 00000088 EBP: f6409a4c ESP: f6409a40 [ 348.530014] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 [ 348.530014] CR0: 80050033 CR2: 00020040 CR3: 33190000 CR4: 00000690 [ 348.530014] Stack: [ 348.530014] 00000000 f4ce63e0 f5f9bd80 f6409a64 f9291d80 0000ce67 f5d51e00 f4ce63e0 [ 348.530014] f3788416 f6409a80 f9291dc1 f4ce8320 f4ce63e0 f5d51e00 f4ce63e0 f4ce8320 [ 348.530014] f6409a98 f9277f6f 00000000 00000000 0000007c 00000000 f6409b2c f9278dd1 [ 348.530014] Call Trace: [ 348.530014] [<f9291d80>] mesh_nexthop_lookup+0xbb/0xc8 [mac80211] [ 348.530014] [<f9291dc1>] mesh_nexthop_resolve+0x34/0xd8 [mac80211] [ 348.530014] [<f9277f6f>] ieee80211_xmit+0x92/0xc1 [mac80211] [ 348.530014] [<f9278dd1>] __ieee80211_subif_start_xmit+0x807/0x83c [mac80211] [ 348.530014] [<c04df012>] ? sch_direct_xmit+0xd7/0x1b3 [ 348.530014] [<c022a8c6>] ? __local_bh_enable_ip+0x5d/0x7b [ 348.530014] [<f956870c>] ? nf_nat_ipv4_out+0x4c/0xd0 [nf_nat_ipv4] [ 348.530014] [<f957e036>] ? iptable_nat_ipv4_fn+0xf/0xf [iptable_nat] [ 348.530014] [<c04c6f45>] ? netif_skb_features+0x14d/0x30a [ 348.530014] [<f9278e10>] ieee80211_subif_start_xmit+0xa/0xe [mac80211] [ 348.530014] [<c04c769c>] dev_hard_start_xmit+0x1f8/0x267 [ 348.530014] [<c04c7261>] ? validate_xmit_skb.isra.120.part.121+0x10/0x253 [ 348.530014] [<c04defc6>] sch_direct_xmit+0x8b/0x1b3 [ 348.530014] [<c04c7a9c>] __dev_queue_xmit+0x2c8/0x513 [ 348.530014] [<c04c7cfb>] dev_queue_xmit+0xa/0xc [ 348.530014] [<f91bfc7a>] batadv_send_skb_packet+0xd6/0xec [batman_adv] [ 348.530014] [<f91bfdc4>] batadv_send_unicast_skb+0x15/0x4a [batman_adv] [ 348.530014] [<f91b5938>] batadv_dat_send_data+0x27e/0x310 [batman_adv] [ 348.530014] [<f91c30b5>] ? batadv_tt_global_hash_find.isra.11+0x8/0xa [batman_adv] [ 348.530014] [<f91b63f3>] batadv_dat_snoop_outgoing_arp_request+0x208/0x23d [batman_adv] [ 348.530014] [<f91c0cd9>] batadv_interface_tx+0x206/0x385 [batman_adv] [ 348.530014] [<c04c769c>] dev_hard_start_xmit+0x1f8/0x267 [ 348.530014] [<c04c7261>] ? validate_xmit_skb.isra.120.part.121+0x10/0x253 [ 348.530014] [<c04defc6>] sch_direct_xmit+0x8b/0x1b3 [ 348.530014] [<c04c7a9c>] __dev_queue_xmit+0x2c8/0x513 [ 348.530014] [<f80cbd2a>] ? igb_xmit_frame+0x57/0x72 [igb] [ 348.530014] [<c04c7cfb>] dev_queue_xmit+0xa/0xc [ 348.530014] [<f843a326>] br_dev_queue_push_xmit+0xeb/0xfb [bridge] [ 348.530014] [<f843a35f>] br_forward_finish+0x29/0x74 [bridge] [ 348.530014] [<f843a23b>] ? deliver_clone+0x3b/0x3b [bridge] [ 348.530014] [<f843a714>] __br_forward+0x89/0xe7 [bridge] [ 348.530014] [<f843a336>] ? br_dev_queue_push_xmit+0xfb/0xfb [bridge] [ 348.530014] [<f843a234>] deliver_clone+0x34/0x3b [bridge] [ 348.530014] [<f843a68b>] ? br_flood+0x95/0x95 [bridge] [ 348.530014] [<f843a66d>] br_flood+0x77/0x95 [bridge] [ 348.530014] [<f843a809>] br_flood_forward+0x13/0x1a [bridge] [ 348.530014] [<f843a68b>] ? br_flood+0x95/0x95 [bridge] [ 348.530014] [<f843b877>] br_handle_frame_finish+0x392/0x3db [bridge] [ 348.530014] [<c04e9b2b>] ? nf_iterate+0x2b/0x6b [ 348.530014] [<f843baa6>] br_handle_frame+0x1e6/0x240 [bridge] [ 348.530014] [<f843b4e5>] ? br_handle_local_finish+0x6a/0x6a [bridge] [ 348.530014] [<c04c4ba0>] __netif_receive_skb_core+0x43a/0x66b [ 348.530014] [<f843b8c0>] ? br_handle_frame_finish+0x3db/0x3db [bridge] [ 348.530014] [<c023cea4>] ? resched_curr+0x19/0x37 [ 348.530014] [<c0240707>] ? check_preempt_wakeup+0xbf/0xfe [ 348.530014] [<c0255dec>] ? ktime_get_with_offset+0x5c/0xfc [ 348.530014] [<c04c4fc1>] __netif_receive_skb+0x47/0x55 [ 348.530014] [<c04c57ba>] netif_receive_skb_internal+0x40/0x5a [ 348.530014] [<c04c61ef>] napi_gro_receive+0x3a/0x94 [ 348.530014] [<f80ce8d5>] igb_poll+0x6fd/0x9ad [igb] [ 348.530014] [<c0242bd8>] ? swake_up_locked+0x14/0x26 [ 348.530014] [<c04c5d29>] net_rx_action+0xde/0x250 [ 348.530014] [<c022a743>] __do_softirq+0x8a/0x163 [ 348.530014] [<c022a6b9>] ? __hrtimer_tasklet_trampoline+0x19/0x19 [ 348.530014] [<c021100f>] do_softirq_own_stack+0x26/0x2c [ 348.530014] <IRQ> [ 348.530014] [<c022a957>] irq_exit+0x31/0x6f [ 348.530014] [<c0210eb2>] do_IRQ+0x8d/0xa0 [ 348.530014] [<c058152c>] common_interrupt+0x2c/0x40 [ 348.530014] Code: e7 8c 00 66 81 ff 88 00 75 12 85 d2 75 0e b2 c3 b8 83 e9 29 f9 e8 a7 5f f9 c6 eb 74 66 81 e3 8c 005 [ 348.530014] EIP: [<f929245d>] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] SS:ESP 0068:f6409a40 [ 348.530014] CR2: 0000000000020040 [ 348.530014] ---[ end trace 48556ac26779732e ]--- [ 348.530014] Kernel panic - not syncing: Fatal exception in interrupt [ 348.530014] Kernel Offset: disabled Cc: stable@vger.kernel.org Reported-by: Fred Veldini <fred.veldini@gmail.com> Tested-by: Fred Veldini <fred.veldini@gmail.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-03-22mac80211: Fix Public Action frame RX in AP modeJouni Malinen1-0/+1
[ Upstream commit 1ec7bae8bec9b72e347e01330c745ab5cdd66f0e ] Public Action frames use special rules for how the BSSID field (Address 3) is set. A wildcard BSSID is used in cases where the transmitter and recipient are not members of the same BSS. As such, we need to accept Public Action frames with wildcard BSSID. Commit db8e17324553 ("mac80211: ignore frames between TDLS peers when operating as AP") added a rule that drops Action frames to TDLS-peers based on an Action frame having different DA (Address 1) and BSSID (Address 3) values. This is not correct since it misses the possibility of BSSID being a wildcard BSSID in which case the Address 1 would not necessarily match. Fix this by allowing mac80211 to accept wildcard BSSID in an Action frame when in AP mode. Fixes: db8e17324553 ("mac80211: ignore frames between TDLS peers when operating as AP") Cc: stable@vger.kernel.org Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-03-21mac80211: minstrel_ht: set default tx aggregation timeout to 0Felix Fietkau1-1/+1
[ Upstream commit 7a36b930e6ed4702c866dc74a5ad07318a57c688 ] The value 5000 was put here with the addition of the timeout field to ieee80211_start_tx_ba_session. It was originally added in mac80211 to save resources for drivers like iwlwifi, which only supports a limited number of concurrent aggregation sessions. Since iwlwifi does not use minstrel_ht and other drivers don't need this, 0 is a better default - especially since there have been recent reports of aggregation setup related issues reproduced with ath9k. This should improve stability without causing any adverse effects. Cc: stable@vger.kernel.org Acked-by: Avery Pennarun <apenwarr@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-03-21mac80211: fix use of uninitialised values in RX aggregationChris Bainbridge1-1/+1
[ Upstream commit f39ea2690bd61efec97622c48323f40ed6e16317 ] Use kzalloc instead of kmalloc for struct tid_ampdu_rx to initialize the "removed" field (all others are initialized manually). That fixes: UBSAN: Undefined behaviour in net/mac80211/rx.c:932:29 load of value 2 is not a valid value for type '_Bool' CPU: 3 PID: 1134 Comm: kworker/u16:7 Not tainted 4.5.0-rc1+ #265 Workqueue: phy0 rt2x00usb_work_rxdone 0000000000000004 ffff880254a7ba50 ffffffff8181d866 0000000000000007 ffff880254a7ba78 ffff880254a7ba68 ffffffff8188422d ffffffff8379b500 ffff880254a7bab8 ffffffff81884747 0000000000000202 0000000348620032 Call Trace: [<ffffffff8181d866>] dump_stack+0x45/0x5f [<ffffffff8188422d>] ubsan_epilogue+0xd/0x40 [<ffffffff81884747>] __ubsan_handle_load_invalid_value+0x67/0x70 [<ffffffff82227b4d>] ieee80211_sta_reorder_release.isra.16+0x5ed/0x730 [<ffffffff8222ca14>] ieee80211_prepare_and_rx_handle+0xd04/0x1c00 [<ffffffff8222db03>] __ieee80211_rx_handle_packet+0x1f3/0x750 [<ffffffff8222e4a7>] ieee80211_rx_napi+0x447/0x990 While at it, convert to use sizeof(*tid_agg_rx) instead. Fixes: 788211d81bfdf ("mac80211: fix RX A-MPDU session reorder timer deletion") Cc: stable@vger.kernel.org Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com> [reword commit message, use sizeof(*tid_agg_rx)] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-02-15mac80211: Requeue work after scan complete for all VIF types.Sachin Kulkarni5-19/+11
[ Upstream commit 4fa11ec726a32ea6dd768dbb2e2af3453a98ec0a ] During a sw scan ieee80211_iface_work ignores work items for all vifs. However after the scan complete work is requeued only for STA, ADHOC and MESH iftypes. This occasionally results in event processing getting delayed/not processed for iftype AP when it coexists with a STA. This can result in data halt and eventually disconnection on the AP interface. Cc: stable@vger.kernel.org Signed-off-by: Sachin Kulkarni <Sachin.Kulkarni@imgtec.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-10-07mac80211: enable assoc check for mesh interfacesBob Copeland1-3/+0
[ Upstream commit 3633ebebab2bbe88124388b7620442315c968e8f ] We already set a station to be associated when peering completes, both in user space and in the kernel. Thus we should always have an associated sta before sending data frames to that station. Failure to check assoc state can cause crashes in the lower-level driver due to transmitting unicast data frames before driver sta structures (e.g. ampdu state in ath9k) are initialized. This occurred when forwarding in the presence of fixed mesh paths: frames were transmitted to stations with whom we hadn't yet completed peering. Cc: stable@vger.kernel.org Reported-by: Alexis Green <agreen@cococorp.com> Tested-by: Jesse Jones <jjones@cococorp.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-08-27mac80211: clear subdir_stations when removing debugfsTom Hughes1-0/+1
[ Upstream commit 4479004e6409087d1b4986881dc98c6c15dffb28 ] If we don't do this, and we then fail to recreate the debugfs directory during a mode change, then we will fail later trying to add stations to this now bogus directory: BUG: unable to handle kernel NULL pointer dereference at 0000006c IP: [<c0a92202>] mutex_lock+0x12/0x30 Call Trace: [<c0678ab4>] start_creating+0x44/0xc0 [<c0679203>] debugfs_create_dir+0x13/0xf0 [<f8a938ae>] ieee80211_sta_debugfs_add+0x6e/0x490 [mac80211] Cc: stable@kernel.org Signed-off-by: Tom Hughes <tom@compton.nu> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-08-04mac80211: prevent possible crypto tx tailroom corruptionMichal Kazior1-0/+3
[ Upstream commit ab499db80fcf07c18e4053f91a619500f663e90e ] There was a possible race between ieee80211_reconfig() and ieee80211_delayed_tailroom_dec(). This could result in inability to transmit data if driver crashed during roaming or rekeying and subsequent skbs with insufficient tailroom appeared. This race was probably never seen in the wild because a device driver would have to crash AND recover within 0.5s which is very unlikely. I was able to prove this race exists after changing the delay to 10s locally and crashing ath10k via debugfs immediately after GTK rekeying. In case of ath10k the counter went below 0. This was harmless but other drivers which actually require tailroom (e.g. for WEP ICV or MMIC) could end up with the counter at 0 instead of >0 and introduce insufficient skb tailroom failures because mac80211 would not resize skbs appropriately anymore. Fixes: 8d1f7ecd2af5 ("mac80211: defer tailroom counter manipulation when roaming") Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-10mac80211: don't use napi_gro_receive() outside NAPI contextJohannes Berg2-2/+6
[ Upstream commit 22d3a3c829fa9ecdb493d1f1f2838d543f8d86a3 ] No matter how the driver manages its NAPI context, there's no way sending frames to it from a timer can be correct, since it would corrupt the internal GRO lists. To avoid that, always use the non-NAPI path when releasing frames from the timer. Cc: stable@vger.kernel.org Reported-by: Jean Trivelly <jean.trivelly@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-10mac80211: move WEP tailroom size checkJanusz Dziedzic1-2/+4
[ Upstream commit 47b4e1fc4972cc43a19121bc2608a60aef3bf216 ] Remove checking tailroom when adding IV as it uses only headroom, and move the check to the ICV generation that actually needs the tailroom. In other case I hit such warning and datapath don't work, when testing: - IBSS + WEP - ath9k with hw crypt enabled - IPv6 data (ping6) WARNING: CPU: 3 PID: 13301 at net/mac80211/wep.c:102 ieee80211_wep_add_iv+0x129/0x190 [mac80211]() [...] Call Trace: [<ffffffff817bf491>] dump_stack+0x45/0x57 [<ffffffff8107746a>] warn_slowpath_common+0x8a/0xc0 [<ffffffff8107755a>] warn_slowpath_null+0x1a/0x20 [<ffffffffc09ae109>] ieee80211_wep_add_iv+0x129/0x190 [mac80211] [<ffffffffc09ae7ab>] ieee80211_crypto_wep_encrypt+0x6b/0xd0 [mac80211] [<ffffffffc09d3fb1>] invoke_tx_handlers+0xc51/0xf30 [mac80211] [...] Cc: stable@vger.kernel.org Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-04-23mac80211: fix RX A-MPDU session reorder timer deletionJohannes Berg3-5/+12
[ Upstream commit 788211d81bfdf9b6a547d0530f206ba6ee76b107 ] There's an issue with the way the RX A-MPDU reorder timer is deleted that can cause a kernel crash like this: * tid_rx is removed - call_rcu(ieee80211_free_tid_rx) * station is destroyed * reorder timer fires before ieee80211_free_tid_rx() runs, accessing the station, thus potentially crashing due to the use-after-free The station deletion is protected by synchronize_net(), but that isn't enough -- ieee80211_free_tid_rx() need not have run when that returns (it deletes the timer.) We could use rcu_barrier() instead of synchronize_net(), but that's much more expensive. Instead, to fix this, add a field tracking that the session is being deleted. In this case, the only re-arming of the timer happens with the reorder spinlock held, so make that code not rearm it if the session is being deleted and also delete the timer after setting that field. This ensures the timer cannot fire after ___ieee80211_stop_rx_ba_session() returns, which fixes the problem. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-04-17mac80211: count interfaces correctly for combination checksAndrei Otcheretianski1-1/+1
[ Upstream commit 0f611d28fc2e13cfec64e1c544c16a086886805a ] Since moving the interface combination checks to mac80211, it's broken because it now only considers interfaces with an assigned channel context, so for example any interface that isn't active can still be up, which is clearly an issue; also, in particular P2P-Device wdevs are an issue since they never have a chanctx. Fix this by counting running interfaces instead the ones with a channel context assigned. Cc: stable@vger.kernel.org [3.16+] Fixes: 73de86a38962b ("cfg80211/mac80211: move interface counting for combination check to mac80211") Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [rewrite commit message, dig out the commit it fixes] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-04-17mac80211: drop unencrypted frames in mesh fwdingBob Copeland1-0/+3
[ Upstream commit d0c22119f574b851e63360c6b8660fe9593bbc3c ] The mesh forwarding path was not checking that data frames were protected when running an encrypted network; add the necessary check. Cc: stable@vger.kernel.org Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-04-17mac80211: disable u-APSD queues by defaultMichal Kazior1-6/+17
[ Upstream commit aa75ebc275b2a91b193654a177daf900ad6703f0 ] Some APs experience problems when working with U-APSD. Decreasing the probability of that happening by using legacy mode for all ACs but VO isn't enough. Cisco 4410N originally forced us to enable VO by default only because it treated non-VO ACs as legacy. However some APs (notably Netgear R7000) silently reclassify packets to different ACs. Since u-APSD ACs require trigger frames for frame retrieval clients would never see some frames (e.g. ARP responses) or would fetch them accidentally after a long time. It makes little sense to enable u-APSD queues by default because it needs userspace applications to be aware of it to actually take advantage of the possible additional powersavings. Implicitly depending on driver autotrigger frame support doesn't make much sense. Cc: stable@vger.kernel.org Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-03-14mac80211: Send EAPOL frames at lowest rateJouni Malinen1-0/+1
commit 9c1c98a3bb7b7593b60264b9a07e001e68b46697 upstream. The current minstrel_ht rate control behavior is somewhat optimistic in trying to find optimum TX rate. While this is usually fine for normal Data frames, there are cases where a more conservative set of retry parameters would be beneficial to make the connection more robust. EAPOL frames are critical to the authentication and especially the EAPOL-Key message 4/4 (the last message in the 4-way handshake) is important to get through to the AP. If that message is lost, the only recovery mechanism in many cases is to reassociate with the AP and start from scratch. This can often be avoided by trying to send the frame with more conservative rate and/or with more link layer retries. In most cases, minstrel_ht is currently using the initial EAPOL-Key frames for probing higher rates and this results in only five link layer transmission attempts (one at high(ish) MCS and four at MCS0). While this works with most APs, it looks like there are some deployed APs that may have issues with the EAPOL frames using HT MCS immediately after association. Similarly, there may be issues in cases where the signal strength or radio environment is not good enough to be able to get frames through even at couple of MCS 0 tries. The best approach for this would likely to be to reduce the TX rate for the last rate (3rd rate parameter in the set) to a low basic rate (say, 6 Mbps on 5 GHz and 2 or 5.5 Mbps on 2.4 GHz), but doing that cleanly requires some more effort. For now, we can start with a simple one-liner that forces the minimum rate to be used for EAPOL frames similarly how the TX rate is selected for the IEEE 802.11 Management frames. This does result in a small extra latency added to the cases where the AP would be able to receive the higher rate, but taken into account how small number of EAPOL frames are used, this is likely to be insignificant. A future optimization in the minstrel_ht design can also allow this patch to be reverted to get back to the more optimized initial TX rate. It should also be noted that many drivers that do not use minstrel as the rate control algorithm are already doing similar workarounds by forcing the lowest TX rate to be used for EAPOL frames. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Tested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-02-06mac80211: only roll back station states for WDS when suspendingLuciano Coelho1-14/+15
commit 2af81d6718f5ec92b1d787e0fe79b0d3b6f78601 upstream. In normal cases (i.e. when we are fully associated), cfg80211 takes care of removing all the stations before calling suspend in mac80211. But in the corner case when we suspend during authentication or association, mac80211 needs to roll back the station states. But we shouldn't roll back the station states in the suspend function, because this is taken care of in other parts of the code, except for WDS interfaces. For AP types of interfaces, cfg80211 takes care of disconnecting all stations before calling the driver's suspend code. For station interfaces, this is done in the quiesce code. For WDS interfaces we still need to do it here, so move the code into a new switch case for WDS. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-06mac80211: properly set CCK flag in radiotapMathy Vanhoef1-1/+1
commit 3a5c5e81d8128a9e43abc52b75dd21d3da7a0cfc upstream. Fix a regression introduced by commit a5e70697d0c4 ("mac80211: add radiotap flag and handling for 5/10 MHz") where the IEEE80211_CHAN_CCK channel type flag was incorrectly replaced by the IEEE80211_CHAN_OFDM flag. This commit fixes that by using the CCK flag again. Fixes: a5e70697d0c4 ("mac80211: add radiotap flag and handling for 5/10 MHz") Signed-off-by: Mathy Vanhoef <vanhoefm@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-16Revert "mac80211: Fix accounting of the tailroom-needed counter"Johannes Berg1-3/+9
commit 1e359a5de861a57aa04d92bb620f52a5c1d7f8b1 upstream. This reverts commit ca34e3b5c808385b175650605faa29e71e91991b. It turns out that the p54 and cw2100 drivers assume that there's tailroom even when they don't say they really need it. However, there's currently no way for them to explicitly say they do need it, so for now revert this. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=90331. Fixes: ca34e3b5c808 ("mac80211: Fix accounting of the tailroom-needed counter") Reported-by: Christopher Chavez <chrischavez@gmx.us> Bisected-by: Larry Finger <Larry.Finger@lwfinger.net> Debugged-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08mac80211: free management frame keys when removing stationJohannes Berg1-1/+1
commit 28a9bc68124c319b2b3dc861e80828a8865fd1ba upstream. When writing the code to allow per-station GTKs, I neglected to take into account the management frame keys (index 4 and 5) when freeing the station and only added code to free the first four data frame keys. Fix this by iterating the array of keys over the right length. Fixes: e31b82136d1a ("cfg80211/mac80211: allow per-station GTKs") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08mac80211: fix multicast LED blinking and counterAndreas Müller1-5/+6
commit d025933e29872cb1fe19fc54d80e4dfa4ee5779c upstream. As multicast-frames can't be fragmented, "dot11MulticastReceivedFrameCount" stopped being incremented after the use-after-free fix. Furthermore, the RX-LED will be triggered by every multicast frame (which wouldn't happen before) which wouldn't allow the LED to rest at all. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=89431 which also had the patch. Fixes: b8fff407a180 ("mac80211: fix use-after-free in defragmentation") Signed-off-by: Andreas Müller <goo@stapelspeicher.org> [rewrite commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-27 11:16:51 +0300