summaryrefslogtreecommitdiff
path: root/net/openvswitch/datapath.c
AgeCommit message (Collapse)AuthorFilesLines
2016-12-27openvswitch: upcall: Fix vlan handling.pravin shelar1-1/+0
Networking stack accelerate vlan tag handling by keeping topmost vlan header in skb. This works as long as packet remains in OVS datapath. But during OVS upcall vlan header is pushed on to the packet. When such packet is sent back to OVS datapath, core networking stack might not handle it correctly. Following patch avoids this issue by accelerating the vlan tag during flow key extract. This simplifies datapath by bringing uniform packet processing for packets from all code paths. Fixes: 5108bbaddc ("openvswitch: add processing of L3 packets"). CC: Jarno Rajahalme <jarno@ovn.org> CC: Jiri Benc <jbenc@redhat.com> Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18netns: make struct pernet_operations::id unsigned intAlexey Dobriyan1-1/+1
Make struct pernet_operations::id unsigned. There are 2 reasons to do so: 1) This field is really an index into an zero based array and thus is unsigned entity. Using negative value is out-of-bound access by definition. 2) On x86_64 unsigned 32-bit data which are mixed with pointers via array indexing or offsets added or subtracted to pointers are preffered to signed 32-bit data. "int" being used as an array index needs to be sign-extended to 64-bit before being used. void f(long *p, int i) { g(p[i]); } roughly translates to movsx rsi, esi mov rdi, [rsi+...] call g MOVSX is 3 byte instruction which isn't necessary if the variable is unsigned because x86_64 is zero extending by default. Now, there is net_generic() function which, you guessed it right, uses "int" as an array index: static inline void *net_generic(const struct net *net, int id) { ... ptr = ng->ptr[id - 1]; ... } And this function is used a lot, so those sign extensions add up. Patch snipes ~1730 bytes on allyesconfig kernel (without all junk messing with code generation): add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730) Unfortunately some functions actually grow bigger. This is a semmingly random artefact of code generation with register allocator being used differently. gcc decides that some variable needs to live in new r8+ registers and every access now requires REX prefix. Or it is shifted into r12, so [r12+0] addressing mode has to be used which is longer than [r8] However, overall balance is in negative direction: add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730) function old new delta nfsd4_lock 3886 3959 +73 tipc_link_build_proto_msg 1096 1140 +44 mac80211_hwsim_new_radio 2776 2808 +32 tipc_mon_rcv 1032 1058 +26 svcauth_gss_legacy_init 1413 1429 +16 tipc_bcbase_select_primary 379 392 +13 nfsd4_exchange_id 1247 1260 +13 nfsd4_setclientid_confirm 782 793 +11 ... put_client_renew_locked 494 480 -14 ip_set_sockfn_get 730 716 -14 geneve_sock_add 829 813 -16 nfsd4_sequence_done 721 703 -18 nlmclnt_lookup_host 708 686 -22 nfsd4_lockt 1085 1063 -22 nfs_get_client 1077 1050 -27 tcf_bpf_init 1106 1076 -30 nfsd4_encode_fattr 5997 5930 -67 Total: Before=154856051, After=154854321, chg -0.00% Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13openvswitch: add processing of L3 packetsJiri Benc1-12/+1
Support receiving, extracting flow key and sending of L3 packets (packets without an Ethernet header). Note that even after this patch, non-Ethernet interfaces are still not allowed to be added to bridges. Similarly, netlink interface for sending and receiving L3 packets to/from user space is not in place yet. Based on previous versions by Lorand Jakab and Simon Horman. Signed-off-by: Lorand Jakab <lojakab@cisco.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: mark families as __ro_after_initJohannes Berg1-5/+5
Now genl_register_family() is the only thing (other than the users themselves, perhaps, but I didn't find any doing that) writing to the family struct. In all families that I found, genl_register_family() is only called from __init functions (some indirectly, in which case I've add __init annotations to clarifly things), so all can actually be marked __ro_after_init. This protects the data structure from accidental corruption. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: statically initialize familiesJohannes Berg1-0/+4
Instead of providing macros/inline functions to initialize the families, make all users initialize them statically and get rid of the macros. This reduces the kernel code size by about 1.6k on x86-64 (with allyesconfig). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: no longer support using static family IDsJohannes Berg1-4/+0
Static family IDs have never really been used, the only use case was the workaround I introduced for those users that assumed their family ID was also their multicast group ID. Additionally, because static family IDs would never be reserved by the generic netlink code, using a relatively low ID would only work for built-in families that can be registered immediately after generic netlink is started, which is basically only the control family (apart from the workaround code, which I also had to add code for so it would reserve those IDs) Thus, anything other than GENL_ID_GENERATE is flawed and luckily not used except in the cases I mentioned. Move those workarounds into a few lines of code, and then get rid of GENL_ID_GENERATE entirely, making it more robust. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19openvswitch: remove unnecessary EXPORT_SYMBOLsJiri Benc1-2/+0
Some symbols exported to other modules are really used only by openvswitch.ko. Remove the exports. Tested by loading all 4 openvswitch modules, nothing breaks. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21openvswitch: avoid resetting flow key while installing new flow.pravin shelar1-4/+4
since commit commit db74a3335e0f6 ("openvswitch: use percpu flow stats") flow alloc resets flow-key. So there is no need to reset the flow-key again if OVS is using newly allocated flow-key. Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21openvswitch: Fix Frame-size larger than 1024 bytes warning.pravin shelar1-6/+9
There is no need to declare separate key on stack, we can just use sw_flow->key to store the key directly. This commit fixes following warning: net/openvswitch/datapath.c: In function ‘ovs_flow_cmd_new’: net/openvswitch/datapath.c:1080:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-11openvswitch: use alias for genetlink family namesThadeu Lima de Souza Cascardo1-0/+4
When userspace tries to create datapaths and the module is not loaded, it will simply fail. With this patch, the module will be automatically loaded. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-22openvswitch: Add packet len info to upcall.William Tu1-1/+12
The commit f2a4d086ed4c ("openvswitch: Add packet truncation support.") introduces packet truncation before sending to userspace upcall receiver. This patch passes up the skb->len before truncation so that the upcall receiver knows the original packet size. Potentially this will be used by sFlow, where OVS translates sFlow config header=N to a sample action, truncating packet to N byte in kernel datapath. Thus, only N bytes instead of full-packet size is copied from kernel to userspace, saving the kernel-to-userspace bandwidth. Signed-off-by: William Tu <u9012063@gmail.com> Cc: Pravin Shelar <pshelar@nicira.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-11openvswitch: Add packet truncation support.William Tu1-12/+17
The patch adds a new OVS action, OVS_ACTION_ATTR_TRUNC, in order to truncate packets. A 'max_len' is added for setting up the maximum packet size, and a 'cutlen' field is to record the number of bytes to trim the packet when the packet is outputting to a port, or when the packet is sent to userspace. Signed-off-by: William Tu <u9012063@gmail.com> Cc: Pravin Shelar <pshelar@nicira.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26ovs: align nlattr properly when neededNicolas Dichtel1-12/+15
I also fix commit 8b32ab9e6ef1: use nla_total_size_64bit() for OVS_FLOW_ATTR_USED in ovs_flow_cmd_msg_size(). Fixes: 8b32ab9e6ef1 ("ovs: use nla_put_u64_64bit()") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25ovs: use nla_put_u64_64bit()Nicolas Dichtel1-1/+2
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14ovs: allow nl 'flow set' to use ufid without flow keySamuel Gauthier1-11/+17
When we want to change a flow using netlink, we have to identify it to be able to perform a lookup. Both the flow key and unique flow ID (ufid) are valid identifiers, but we always have to specify the flow key in the netlink message. When both attributes are there, the ufid is used. The flow key is used to validate the actions provided by the userland. This commit allows to use the ufid without having to provide the flow key, as it is already done in the netlink 'flow get' and 'flow del' path. The flow key remains mandatory when an action is provided. Signed-off-by: Samuel Gauthier <samuel.gauthier@6wind.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01ovs: propagate per dp max headroom to all vportsPaolo Abeni1-0/+40
This patch implements bookkeeping support to compute the maximum headroom for all the devices in each datapath. When said value changes, the underlying devs are notified via the ndo_set_rx_headroom method. This also increases the internal vports xmit performance. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18Revert "genl: Add genlmsg_new_unicast() for unicast message allocation"Florian Westphal1-5/+5
This reverts commit bb9b18fb55b0 ("genl: Add genlmsg_new_unicast() for unicast message allocation")'. Nothing wrong with it; its no longer needed since this was only for mmapped netlink support. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18openvswitch: Revert: "Enable memory mapped Netlink i/o"Florian Westphal1-7/+3
revert commit 795449d8b846 ("openvswitch: Enable memory mapped Netlink i/o"). Following the mmaped netlink removal this code can be removed. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11openvswitch: allow management from inside user namespacesTycho Andersen1-10/+10
Operations with the GENL_ADMIN_PERM flag fail permissions checks because this flag means we call netlink_capable, which uses the init user ns. Instead, let's introduce a new flag, GENL_UNS_ADMIN_PERM for operations which should be allowed inside a user namespace. The motivation for this is to be able to run openvswitch in unprivileged containers. I've tested this and it seems to work, but I really have no idea about the security consequences of this patch, so thoughts would be much appreciated. v2: use the GENL_UNS_ADMIN_PERM flag instead of a check in each function v3: use separate ifs for UNS_ADMIN_PERM and ADMIN_PERM, instead of one massive one Reported-by: James Page <james.page@canonical.com> Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com> CC: Eric Biederman <ebiederm@xmission.com> CC: Pravin Shelar <pshelar@ovn.org> CC: Justin Pettit <jpettit@nicira.com> CC: "David S. Miller" <davem@davemloft.net> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15net: preserve IP control block during GSO segmentationKonstantin Khlebnikov1-4/+1
Skb_gso_segment() uses skb control block during segmentation. This patch adds 32-bytes room for previous control block which will be copied into all resulting segments. This patch fixes kernel crash during fragmenting forwarded packets. Fragmentation requires valid IP CB in skb for clearing ip options. Also patch removes custom save/restore in ovs code, now it's redundant. Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Link: http://lkml.kernel.org/r/CALYGNiP-0MZ-FExV2HutTvE9U-QQtkKSoE--KN=JQE5STYsjAA@mail.gmail.com Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-08Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina: "Trivial stuff from trivial tree that can be trivially summed up as: - treewide drop of spurious unlikely() before IS_ERR() from Viresh Kumar - cosmetic fixes (that don't really affect basic functionality of the driver) for pktcdvd and bcache, from Julia Lawall and Petr Mladek - various comment / printk fixes and updates all over the place" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: bcache: Really show state of work pending bit hwmon: applesmc: fix comment typos Kconfig: remove comment about scsi_wait_scan module class_find_device: fix reference to argument "match" debugfs: document that debugfs_remove*() accepts NULL and error values net: Drop unlikely before IS_ERR(_OR_NULL) mm: Drop unlikely before IS_ERR(_OR_NULL) fs: Drop unlikely before IS_ERR(_OR_NULL) drivers: net: Drop unlikely before IS_ERR(_OR_NULL) drivers: misc: Drop unlikely before IS_ERR(_OR_NULL) UBI: Update comments to reflect UBI_METAONLY flag pktcdvd: drop null test before destroy functions
2015-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+2
Conflicts: net/ipv6/xfrm6_output.c net/openvswitch/flow_netlink.c net/openvswitch/vport-gre.c net/openvswitch/vport-vxlan.c net/openvswitch/vport.c net/openvswitch/vport.h The openvswitch conflicts were overlapping changes. One was the egress tunnel info fix in 'net' and the other was the vport ->send() op simplification in 'net-next'. The xfrm6_output.c conflicts was also a simplification overlapping a bug fix. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-23openvswitch: Fix egress tunnel info.Pravin B Shelar1-3/+2
While transitioning to netdev based vport we broke OVS feature which allows user to retrieve tunnel packet egress information for lwtunnel devices. Following patch fixes it by introducing ndo operation to get the tunnel egress info. Same ndo operation can be used for lwtunnel devices and compat ovs-tnl-vport devices. So after adding such device operation we can remove similar operation from ovs-vport. Fixes: 614732eaa12d ("openvswitch: Use regular VXLAN net_device device"). Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29net: Drop unlikely before IS_ERR(_OR_NULL)Viresh Kumar1-1/+1
IS_ERR(_OR_NULL) already contain an 'unlikely' compiler flag and there is no need to do that again from its callers. Drop it. Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-09-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
Conflicts: net/ipv4/arp.c The net/ipv4/arp.c conflict was one commit adding a new local variable while another commit was deleting one. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24genetlink: simplify genl_notifyJiri Benc1-2/+1
The genl_notify function has too many arguments for no real reason - all callers use genl_info to get them anyway. Just pass the genl_info down to genl_notify. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-23openvswitch: Zero flows on allocation.Jesse Gross1-2/+2
When support for megaflows was introduced, OVS needed to start installing flows with a mask applied to them. Since masking is an expensive operation, OVS also had an optimization that would only take the parts of the flow keys that were covered by a non-zero mask. The values stored in the remaining pieces should not matter because they are masked out. While this works fine for the purposes of matching (which must always look at the mask), serialization to netlink can be problematic. Since the flow and the mask are serialized separately, the uninitialized portions of the flow can be encoded with whatever values happen to be present. In terms of functionality, this has little effect since these fields will be masked out by definition. However, it leaks kernel memory to userspace, which is a potential security vulnerability. It is also possible that other code paths could look at the masked key and get uninitialized data, although this does not currently appear to be an issue in practice. This removes the mask optimization for flows that are being installed. This was always intended to be the case as the mask optimizations were really targetting per-packet flow operations. Fixes: 03f0d916 ("openvswitch: Mega flow implementation") Signed-off-by: Jesse Gross <jesse@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31ip-tunnel: Use API to access tunnel metadata options.Pravin B Shelar1-1/+2
Currently tun-info options pointer is used in few cases to pass options around. But tunnel options can be accessed using ip_tunnel_info_opts() API without using the pointer. Following patch removes the redundant pointer and consistently make use of API. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Reviewed-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-30openvswitch: Remove egress_tun_info.Pravin B Shelar1-1/+0
tun info is passed using skb-dst pointer. Now we have converted all vports to netdev based implementation so Now we can remove redundant pointer to tun-info from OVS_CB. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27openvswitch: Allow matching on conntrack labelJoe Stringer1-7/+11
Allow matching and setting the ct_label field. As with ct_mark, this is populated by executing the CT action. The label field may be modified by specifying a label and mask nested under the CT action. It is stored as metadata attached to the connection. Label modification occurs after lookup, and will only persist when the conntrack entry is committed by providing the COMMIT flag to the CT action. Labels are currently fixed to 128 bits in size. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27openvswitch: Add conntrack actionJoe Stringer1-16/+50
Expose the kernel connection tracker via OVS. Userspace components can make use of the CT action to populate the connection state (ct_state) field for a flow. This state can be subsequently matched. Exposed connection states are OVS_CS_F_*: - NEW (0x01) - Beginning of a new connection. - ESTABLISHED (0x02) - Part of an existing connection. - RELATED (0x04) - Related to an established connection. - INVALID (0x20) - Could not track the connection for this packet. - REPLY_DIR (0x40) - This packet is in the reply direction for the flow. - TRACKED (0x80) - This packet has been sent through conntrack. When the CT action is executed by itself, it will send the packet through the connection tracker and populate the ct_state field with one or more of the connection state flags above. The CT action will always set the TRACKED bit. When the COMMIT flag is passed to the conntrack action, this specifies that information about the connection should be stored. This allows subsequent packets for the same (or related) connections to be correlated with this connection. Sending subsequent packets for the connection through conntrack allows the connection tracker to consider the packets as ESTABLISHED, RELATED, and/or REPLY_DIR. The CT action may optionally take a zone to track the flow within. This allows connections with the same 5-tuple to be kept logically separate from connections in other zones. If the zone is specified, then the "ct_zone" match field will be subsequently populated with the zone id. IP fragments are handled by transparently assembling them as part of the CT action. The maximum received unit (MRU) size is tracked so that refragmentation can occur during output. IP frag handling contributed by Andy Zhou. Based on original design by Justin Pettit. Signed-off-by: Joe Stringer <joestringer@nicira.com> Signed-off-by: Justin Pettit <jpettit@nicira.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27openvswitch: Serialize acts with original netlink lenJoe Stringer1-1/+1
Previously, we used the kernel-internal netlink actions length to calculate the size of messages to serialize back to userspace. However,the sw_flow_actions may not be formatted exactly the same as the actions on the wire, so store the original actions length when de-serializing and re-use the original length when serializing. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21openvswitch: Abstract vport name through ovs_vport_name()Thomas Graf1-2/+2
This allows to get rid of the get_name() vport ops later on. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21openvswitch: Move dev pointer into vport itselfThomas Graf1-5/+2
This is the first step in representing all OVS vports as regular struct net_devices. Move the net_device pointer into the vport structure itself to get rid of struct vport_netdev. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21openvswitch: Make tunnel set action attach a metadata dstThomas Graf1-4/+4
Utilize the new metadata dst to attach encapsulation instructions to the skb. The existing egress_tun_info via the OVS_CB() is left in place until all tunnel vports have been converted to the new method. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-02openvswitch: include datapath actions with sampled-packet upcall to userspaceNeil McKee1-2/+16
If new optional attribute OVS_USERSPACE_ATTR_ACTIONS is added to an OVS_ACTION_ATTR_USERSPACE action, then include the datapath actions in the upcall. This Directly associates the sampled packet with the path it takes through the virtual switch. Path information currently includes mangling, encapsulation and decapsulation actions for tunneling protocols GRE, VXLAN, Geneve, MPLS and QinQ, but this extension requires no further changes to accommodate datapath actions that may be added in the future. Adding path information enhances visibility into complex virtual networks. Signed-off-by: Neil McKee <neil.mckee@inmon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-06openvswitch: Use eth_proto_is_802_3Alexander Duyck1-1/+1
Replace "ntohs(proto) >= ETH_P_802_3_MIN" w/ eth_proto_is_802_3(proto). Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-12net: Kill hold_net release_netEric W. Biederman1-3/+1
hold_net and release_net were an idea that turned out to be useless. The code has been disabled since 2008. Kill the code it is long past due. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20openvswitch: Fix net exit.Pravin B Shelar1-2/+43
Open vSwitch allows moving internal vport to different namespace while still connected to the bridge. But when namespace deleted OVS does not detach these vports, that results in dangling pointer to netdevice which causes kernel panic as follows. This issue is fixed by detaching all ovs ports from the deleted namespace at net-exit. BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 IP: [<ffffffffa0aadaa5>] ovs_vport_locate+0x35/0x80 [openvswitch] Oops: 0000 [#1] SMP Call Trace: [<ffffffffa0aa6391>] lookup_vport+0x21/0xd0 [openvswitch] [<ffffffffa0aa65f9>] ovs_vport_cmd_get+0x59/0xf0 [openvswitch] [<ffffffff8167e07c>] genl_family_rcv_msg+0x1bc/0x3e0 [<ffffffff8167e319>] genl_rcv_msg+0x79/0xc0 [<ffffffff8167d919>] netlink_rcv_skb+0xb9/0xe0 [<ffffffff8167deac>] genl_rcv+0x2c/0x40 [<ffffffff8167cffd>] netlink_unicast+0x12d/0x1c0 [<ffffffff8167d3da>] netlink_sendmsg+0x34a/0x6b0 [<ffffffff8162e140>] sock_sendmsg+0xa0/0xe0 [<ffffffff8162e5e8>] ___sys_sendmsg+0x408/0x420 [<ffffffff8162f541>] __sys_sendmsg+0x51/0x90 [<ffffffff8162f592>] SyS_sendmsg+0x12/0x20 [<ffffffff81764ee9>] system_call_fastpath+0x12/0x17 Reported-by: Assaf Muller <amuller@redhat.com> Fixes: 46df7b81454("openvswitch: Add support for network namespaces.") Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Reviewed-by: Thomas Graf <tgraf@noironetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27openvswitch: Add support for unique flow IDs.Joe Stringer1-50/+157
Previously, flows were manipulated by userspace specifying a full, unmasked flow key. This adds significant burden onto flow serialization/deserialization, particularly when dumping flows. This patch adds an alternative way to refer to flows using a variable-length "unique flow identifier" (UFID). At flow setup time, userspace may specify a UFID for a flow, which is stored with the flow and inserted into a separate table for lookup, in addition to the standard flow table. Flows created using a UFID must be fetched or deleted using the UFID. All flow dump operations may now be made more terse with OVS_UFID_F_* flags. For example, the OVS_UFID_F_OMIT_KEY flag allows responses to omit the flow key from a datapath operation if the flow has a corresponding UFID. This significantly reduces the time spent assembling and transacting netlink messages. With all OVS_UFID_F_OMIT_* flags enabled, the datapath only returns the UFID and statistics for each flow during flow dump, increasing ovs-vswitchd revalidator performance by 40% or more. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27openvswitch: Refactor ovs_nla_fill_match().Joe Stringer1-35/+6
Refactor the ovs_nla_fill_match() function into separate netlink serialization functions ovs_nla_put_{unmasked_key,mask}(). Modify ovs_nla_put_flow() to handle attribute nesting and expose the 'is_mask' parameter - all callers need to nest the flow, and callers have better knowledge about whether it is serializing a mask or not. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-18netlink: make nlmsg_end() and genlmsg_end() voidJohannes Berg1-3/+6
Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+2
Conflicts: drivers/net/xen-netfront.c Minor overlapping changes in xen-netfront.c, mostly to do with some buffer management changes alongside the split of stats into TX and RX. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15openvswitch: packet messages need their own probe attribtueThomas Graf1-1/+2
User space is currently sending a OVS_FLOW_ATTR_PROBE for both flow and packet messages. This leads to an out-of-bounds access in ovs_packet_cmd_execute() because OVS_FLOW_ATTR_PROBE > OVS_PACKET_ATTR_MAX. Introduce a new OVS_PACKET_ATTR_PROBE with the same numeric value as OVS_FLOW_ATTR_PROBE to grow the range of accepted packet attributes while maintaining to be binary compatible with existing OVS binaries. Fixes: 05da589 ("openvswitch: Add support for OVS_FLOW_ATTR_PROBE.") Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Tracked-down-by: Florian Westphal <fw@strlen.de> Signed-off-by: Thomas Graf <tgraf@suug.ch> Reviewed-by: Jesse Gross <jesse@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14net: rename vlan_tx_* helpers since "tx" is misleading thereJiri Pirko1-1/+1
The same macros are used for rx as well. So rename it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-27genetlink: pass only network namespace to genl_has_listeners()Johannes Berg1-2/+1
There's no point to force the caller to know about the internal genl_sock to use inside struct net, just have them pass the network namespace. This doesn't really change code generation since it's an inline, but makes the caller less magic - there's never any reason to pass another socket. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-7/+7
Conflicts: drivers/net/ieee802154/fakehard.c A bug fix went into 'net' for ieee802154/fakehard.c, which is removed in 'net-next'. Add build fix into the merge from Stephen Rothwell in openvswitch, the logging macros take a new initial 'log' argument, a new call was added in 'net' so when we merge that in here we have to explicitly add the new 'log' arg to it else the build fails. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21vlan: introduce *vlan_hwaccel_push_inside helpersJiri Pirko1-3/+1
Use them to push skb->vlan_tci into the payload and avoid code duplication. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21vlan: rename __vlan_put_tag to vlan_insert_tag_set_protoJiri Pirko1-1/+2
Name fits better. Plus there's going to be introduced __vlan_insert_tag later on. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-15openvswitch: Convert dp rcu read operation to locked operationsPravin B Shelar1-7/+7
dp read operations depends on ovs_dp_cmd_fill_info(). This API needs to looup vport to find dp name, but vport lookup can fail. Therefore to keep vport reference alive we need to take ovs lock. Introduced by commit 6093ae9abac1 ("openvswitch: Minimize dp and vport critical sections"). Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Andy Zhou <azhou@nicira.com>