summaryrefslogtreecommitdiff
path: root/net/openvswitch/vport.c
AgeCommit message (Collapse)AuthorFilesLines
2016-11-13openvswitch: add processing of L3 packetsJiri Benc1-0/+19
Support receiving, extracting flow key and sending of L3 packets (packets without an Ethernet header). Note that even after this patch, non-Ethernet interfaces are still not allowed to be added to bridges. Similarly, netlink interface for sending and receiving L3 packets to/from user space is not in place yet. Based on previous versions by Lorand Jakab and Simon Horman. Signed-off-by: Lorand Jakab <lojakab@cisco.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13openvswitch: pass mac_proto to ovs_vport_sendJiri Benc1-1/+1
We'll need it to alter packets sent to ARPHRD_NONE interfaces. Change do_output() to use the actual L2 header size of the packet when deciding on the minimum cutlen. The assumption here is that what matters is not the output interface hard_header_len but rather the L2 header of the particular packet. For example, ARPHRD_NONE tunnels that encapsulate Ethernet should get at least the Ethernet header. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13openvswitch: use hard_header_len instead of hardcoded ETH_HLENJiri Benc1-4/+6
On tx, use hard_header_len while deciding whether to refragment or drop the packet. That way, all combinations are calculated correctly: * L2 packet going to L2 interface (the L2 header len is subtracted), * L2 packet going to L3 interface (the L2 header is included in the packet lenght), * L3 packet going to L3 interface. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19openvswitch: remove unnecessary EXPORT_SYMBOLsJiri Benc1-1/+0
Some symbols exported to other modules are really used only by openvswitch.ko. Remove the exports. Tested by loading all 4 openvswitch modules, nothing breaks. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19openvswitch: remove unused functionsJiri Benc1-16/+0
ovs_vport_deferred_free is not used anywhere. It's the only caller of free_vport_rcu thus this one can be removed, too. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-13openvswitch: fix vlan subtraction from packet lengthJiri Benc1-1/+2
When the packet has its vlan tag in skb->vlan_tci, the length of the VLAN header is not counted in skb->len. It doesn't make sense to subtract it. Fixes: 018c1dda5ff1 ("openvswitch: 802.1AD Flow handling, actions, vlan parsing, netlink attributes") Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Acked-by: Eric Garver <e@erig.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-09openvswitch: 802.1AD Flow handling, actions, vlan parsing, netlink attributesEric Garver1-1/+6
Add support for 802.1ad including the ability to push and pop double tagged vlans. Add support for 802.1ad to netlink parsing and flow conversion. Uses double nested encap attributes to represent double tagged vlan. Inner TPID encoded along with ctci in nested attributes. This is based on Thomas F Herbert's original v20 patch. I made some small clean ups and bug fixes. Signed-off-by: Thomas F Herbert <thomasfherbert@gmail.com> Signed-off-by: Eric Garver <e@erig.me> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-11openvswitch: Add packet truncation support.William Tu1-0/+1
The patch adds a new OVS action, OVS_ACTION_ATTR_TRUNC, in order to truncate packets. A 'max_len' is added for setting up the maximum packet size, and a 'cutlen' field is to record the number of bytes to trim the packet when the packet is outputting to a port, or when the packet is sent to userspace. Signed-off-by: William Tu <u9012063@gmail.com> Cc: Pravin Shelar <pshelar@nicira.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02openvswitch: properly refcount vport-vxlan modulePaolo Abeni1-2/+2
After 614732eaa12d, no refcount is maintained for the vport-vxlan module. This allows the userspace to remove such module while vport-vxlan devices still exist, which leads to later oops. v1 -> v2: - move vport 'owner' initialization in ovs_vport_ops_register() and make such function a macro Fixes: 614732eaa12d ("openvswitch: Use regular VXLAN net_device device") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-25net: openvswitch: Remove invalid commentAaron Conole1-2/+2
During pre-upstream development, the openvswitch datapath used a custom hashtable to store vports that could fail on delete due to lack of memory. However, prior to upstream submission, this code was reworked to use an hlist based hastable with flexible-array based buckets. As such the failure condition was eliminated from the vport_del path, rendering this comment invalid. Signed-off-by: Aaron Conole <aconole@bytheb.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-58/+0
Conflicts: net/ipv6/xfrm6_output.c net/openvswitch/flow_netlink.c net/openvswitch/vport-gre.c net/openvswitch/vport-vxlan.c net/openvswitch/vport.c net/openvswitch/vport.h The openvswitch conflicts were overlapping changes. One was the egress tunnel info fix in 'net' and the other was the vport ->send() op simplification in 'net-next'. The xfrm6_output.c conflicts was also a simplification overlapping a bug fix. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-23openvswitch: Fix egress tunnel info.Pravin B Shelar1-58/+0
While transitioning to netdev based vport we broke OVS feature which allows user to retrieve tunnel packet egress information for lwtunnel devices. Following patch fixes it by introducing ndo operation to get the tunnel egress info. Same ndo operation can be used for lwtunnel devices and compat ovs-tnl-vport devices. So after adding such device operation we can remove similar operation from ovs-vport. Fixes: 614732eaa12d ("openvswitch: Use regular VXLAN net_device device"). Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22openvswitch: Use dev_queue_xmit for vport send.Pravin B Shelar1-0/+30
With use of lwtunnel, we can directly call dev_queue_xmit() rather than calling netdev vport send operation. Following change make tunnel vport code bit cleaner. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-19openvswitch: Scrub skb between namespacesJoe Stringer1-0/+9
If OVS receives a packet from another namespace, then the packet should be scrubbed. However, people have already begun to rely on the behaviour that skb->mark is preserved across namespaces, so retain this one field. This is mainly to address information leakage between namespaces when using OVS internal ports, but by placing it in ovs_vport_receive() it is more generally applicable, meaning it should not be overlooked if other port types are allowed to be moved into namespaces in future. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05openvswitch: Fix ovs_vport_get_stats()Pravin B Shelar1-29/+13
Not every device has dev->tstats set. So when OVS tries to calculate vport stats it causes kernel panic. Following patch fixes it by using standard API to get net-device stats. ---8<--- Unable to handle kernel paging request at virtual address 766b4008 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: vport_vxlan vxlan ip6_udp_tunnel udp_tunnel tun bridge stp llc openvswitch ipv6 CPU: 7 PID: 1108 Comm: ovs-vswitchd Not tainted 4.3.0-rc3+ #82 PC is at ovs_vport_get_stats+0x150/0x1f8 [openvswitch] <snip> Call trace: [<ffffffbffc0859f8>] ovs_vport_get_stats+0x150/0x1f8 [openvswitch] [<ffffffbffc07cdb0>] ovs_vport_cmd_fill_info+0x140/0x1e0 [openvswitch] [<ffffffbffc07cf0c>] ovs_vport_cmd_dump+0xbc/0x138 [openvswitch] [<ffffffc00045a5ac>] netlink_dump+0xb8/0x258 [<ffffffc00045ace0>] __netlink_dump_start+0x120/0x178 [<ffffffc00045dd9c>] genl_family_rcv_msg+0x2d4/0x308 [<ffffffc00045de58>] genl_rcv_msg+0x88/0xc4 [<ffffffc00045cf24>] netlink_rcv_skb+0xd4/0x100 [<ffffffc00045dab0>] genl_rcv+0x30/0x48 [<ffffffc00045c830>] netlink_unicast+0x154/0x200 [<ffffffc00045cc9c>] netlink_sendmsg+0x308/0x364 [<ffffffc00041e10c>] sock_sendmsg+0x14/0x2c [<ffffffc000420d58>] SyS_sendto+0xbc/0xf0 Code: aa1603e1 f94037a4 aa1303e2 aa1703e0 (f9400465) Reported-by: Tomasz Sawicki <tomasz.sawicki@objectiveintegration.uk> Fixes: 8c876639c98 ("openvswitch: Remove vport stats.") Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31ip-tunnel: Use API to access tunnel metadata options.Pravin B Shelar1-13/+14
Currently tun-info options pointer is used in few cases to pass options around. But tunnel options can be accessed using ip_tunnel_info_opts() API without using the pointer. Following patch removes the redundant pointer and consistently make use of API. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Reviewed-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-30openvswitch: Remove vport stats.Pravin B Shelar1-97/+12
Since all vport types are now backed by netdev, we can directly use netdev stats. Following patch removes redundant stat from vport. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-30openvswitch: Remove egress_tun_info.Pravin B Shelar1-3/+3
tun info is passed using skb-dst pointer. Now we have converted all vports to netdev based implementation so Now we can remove redundant pointer to tun-info from OVS_CB. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29ip_tunnels: record IP version in tunnel infoJiri Benc1-0/+2
There's currently nothing preventing directing packets with IPv6 encapsulation data to IPv4 tunnels (and vice versa). If this happens, IPv6 addresses are incorrectly interpreted as IPv4 ones. Track whether the given ip_tunnel_key contains IPv4 or IPv6 data. Store this in ip_tunnel_info. Reject packets at appropriate places if they are supposed to be encapsulated into an incompatible protocol. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27openvswitch: Add conntrack actionJoe Stringer1-0/+1
Expose the kernel connection tracker via OVS. Userspace components can make use of the CT action to populate the connection state (ct_state) field for a flow. This state can be subsequently matched. Exposed connection states are OVS_CS_F_*: - NEW (0x01) - Beginning of a new connection. - ESTABLISHED (0x02) - Part of an existing connection. - RELATED (0x04) - Related to an established connection. - INVALID (0x20) - Could not track the connection for this packet. - REPLY_DIR (0x40) - This packet is in the reply direction for the flow. - TRACKED (0x80) - This packet has been sent through conntrack. When the CT action is executed by itself, it will send the packet through the connection tracker and populate the ct_state field with one or more of the connection state flags above. The CT action will always set the TRACKED bit. When the COMMIT flag is passed to the conntrack action, this specifies that information about the connection should be stored. This allows subsequent packets for the same (or related) connections to be correlated with this connection. Sending subsequent packets for the connection through conntrack allows the connection tracker to consider the packets as ESTABLISHED, RELATED, and/or REPLY_DIR. The CT action may optionally take a zone to track the flow within. This allows connections with the same 5-tuple to be kept logically separate from connections in other zones. If the zone is specified, then the "ct_zone" match field will be subsequently populated with the zone id. IP fragments are handled by transparently assembling them as part of the CT action. The maximum received unit (MRU) size is tracked so that refragmentation can occur during output. IP frag handling contributed by Andy Zhou. Based on original design by Justin Pettit. Signed-off-by: Joe Stringer <joestringer@nicira.com> Signed-off-by: Justin Pettit <jpettit@nicira.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21ip_tunnels: use tos and ttl fields also for IPv6Jiri Benc1-2/+2
Rename the ipv4_tos and ipv4_ttl fields to just 'tos' and 'ttl', as they'll be used with IPv6 tunnels, too. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21ip_tunnels: add IPv6 addresses to ip_tunnel_keyJiri Benc1-1/+1
Add the IPv6 addresses as an union with IPv4 ones. When using IPv4, the newly introduced padding after the IPv4 addresses needs to be zeroed out. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21openvswitch: Abstract vport name through ovs_vport_name()Thomas Graf1-2/+2
This allows to get rid of the get_name() vport ops later on. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21ip_tunnel: Make ovs_tunnel_info and ovs_key_ipv4_tunnel genericThomas Graf1-15/+15
Rename the tunnel metadata data structures currently internal to OVS and make them generic for use by all IP tunnels. Both structures are kernel internal and will stay that way. Their members are exposed to user space through individual Netlink attributes by OVS. It will therefore be possible to extend/modify these structures without affecting user ABI. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31openvswitch: Return vport module ref before destructionThomas Graf1-3/+1
Return module reference before invoking the respective vport ->destroy() function. This is needed as ovs_vport_del() is not invoked inside an RCU read side critical section so the kfree can occur immediately before returning to ovs_vport_del(). Returning the module reference before ->destroy() is safe because the module unregistration is blocked on ovs_lock which we hold while destroying the datapath. Fixes: 62b9c8d0372d ("ovs: Turn vports with dependencies into separate modules") Reported-by: Pravin Shelar <pshelar@nicira.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15openvswitch: Introduce ovs_tunnel_route_lookupFan Du1-8/+1
Introduce ovs_tunnel_route_lookup to consolidate route lookup shared by vxlan, gre, and geneve ports. Signed-off-by: Fan Du <fan.du@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14net: rename vlan_tx_* helpers since "tx" is misleading thereJiri Pirko1-1/+2
The same macros are used for rx as well. So rename it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-03openvswitch: Consistently include VLAN header in flow and port stats.Ben Pfaff1-1/+1
Until now, when VLAN acceleration was in use, the bytes of the VLAN header were not included in port or flow byte counters. They were however included when VLAN acceleration was not used. This commit corrects the inconsistency, by always including the VLAN header in byte counters. Previous discussion at http://openvswitch.org/pipermail/dev/2014-December/049521.html Reported-by: Motonori Shindo <mshindo@vmware.com> Signed-off-by: Ben Pfaff <blp@nicira.com> Reviewed-by: Flavio Leitner <fbl@sysclose.org> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-24openvswitch: Fix vport_send double freePravin B Shelar1-3/+2
Today vport-send has complex error handling because it involves freeing skb and updating stats depending on return value from vport send implementation. This can be simplified by delegating responsibility of freeing skb to the vport implementation for all cases. So that vport-send needs just update stats. Fixes: 91b7514cdf ("openvswitch: Unify vport error stats handling") Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10openvswitch: set correct protocol on route lookupJiri Benc1-1/+1
Respect what the caller passed to ovs_tunnel_get_egress_info. Fixes: 8f0aad6f35f7e ("openvswitch: Extend packet attribute for egress tunnel info") Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-10openvswitch: Constify various function argumentsThomas Graf1-4/+4
Help produce better optimized code. Signed-off-by: Thomas Graf <tgraf@noironetworks.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-10openvswitch: Extend packet attribute for egress tunnel infoWenyu Zhang1-0/+61
OVS vswitch has extended IPFIX exporter to export tunnel headers to improve network visibility. To export this information userspace needs to know egress tunnel for given packet. By extending packet attributes datapath can export egress tunnel info for given packet. So that userspace can ask for egress tunnel info in userspace action. This information is used to build IPFIX data for given flow. Signed-off-by: Wenyu Zhang <wenyuz@vmware.com> Acked-by: Romain Lenglet <rlenglet@vmware.com> Acked-by: Ben Pfaff <blp@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-10openvswitch: Export symbols as GPL symbols.Pravin B Shelar1-6/+6
vport can be compiled as modules, therefore openvswitch needs to export few symbols. Export them as GPL symbols. CC: Thomas Graf <tgraf@noironetworks.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-10-28ovs: Turn vports with dependencies into separate modulesThomas Graf1-32/+70
The internal and netdev vport remain part of openvswitch.ko. Encap vports including vxlan, gre, and geneve can be built as separate modules and are loaded on demand. Modules can be unloaded after use. Datapath ports keep a reference to the vport module during their lifetime. Allows to remove the error prone maintenance of the global list vport_ops_list. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-16openvswitch: use vport instead of pFabian Frederick1-2/+2
All functions used struct vport *vport except ovs_vport_find_upcall_portid. This fixes 1 kerneldoc warning Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06openvswitch: Add support for Geneve tunneling.Jesse Gross1-0/+3
The Openvswitch implementation is completely agnostic to the options that are in use and can handle newly defined options without further work. It does this by simply matching on a byte array of options and allowing userspace to setup flows on this array. Signed-off-by: Jesse Gross <jesse@nicira.com> Singed-off-by: Ansis Atteka <aatteka@nicira.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Acked-by: Thomas Graf <tgraf@noironetworks.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06openvswitch: Wrap struct ovs_key_ipv4_tunnel in a new structure.Jesse Gross1-3/+3
Currently, the flow information that is matched for tunnels and the tunnel data passed around with packets is the same. However, as additional information is added this is not necessarily desirable, as in the case of pointers. This adds a new structure for tunnel metadata which currently contains only the existing struct. This change is purely internal to the kernel since the current OVS_KEY_ATTR_IPV4_TUNNEL is simply a compressed version of OVS_KEY_ATTR_TUNNEL that is translated at flow setup. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-16openvswitch: Use tun_key only for egress tunnel path.Pravin B Shelar1-2/+10
Currently tun_key is used for passing tunnel information on ingress and egress path, this cause confusion. Following patch removes its use on ingress path make it egress only parameter. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Andy Zhou <azhou@nicira.com>
2014-09-16openvswitch: refactor ovs flow extract API.Pravin B Shelar1-2/+3
OVS flow extract is called on packet receive or packet execute code path. Following patch defines separate API for extracting flow-key in packet execute code path. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Andy Zhou <azhou@nicira.com>
2014-09-09openvswitch: change the data type of error status to atomic_long_tLi RongQing1-17/+8
Change the date type of error status from u64 to atomic_long_t, and use atomic operation, then remove the lock which is used to protect the error status. The operation of atomic maybe faster than spin lock. Cc: Pravin Shelar <pshelar@nicira.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-14openvswitch: Fix memory leak in ovs_vport_alloc() error pathChristoph Jaeger1-1/+3
ovs_vport_alloc() bails out without freeing the memory 'vport' points to. Picked up by Coverity - CID 1230503. Fixes: 5cd667b0a4 ("openvswitch: Allow each vport to have an array of 'port_id's.") Signed-off-by: Christoph Jaeger <cj@linux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24openvswitch: Allow each vport to have an array of 'port_id's.Alex Wang1-1/+100
In order to allow handlers directly read upcalls from datapath, we need to support per-handler netlink socket for each vport in datapath. This commit makes this happen. Also, it is guaranteed to be backward compatible with previous branch. Signed-off-by: Alex Wang <alexw@nicira.com> Acked-by: Thomas Graf <tgraf@redhat.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-03-15net: Replace u64_stats_fetch_begin_bh to u64_stats_fetch_begin_irqEric W. Biederman1-2/+2
Replace the bh safe variant with the hard irq safe variant. We need a hard irq safe variant to deal with netpoll transmitting packets from hard irq context, and we need it in most if not all of the places using the bh safe variant. Except on 32bit uni-processor the code is exactly the same so don't bother with a bh variant, just have a hard irq safe variant that everyone can use. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-15net: introduce netdev_alloc_pcpu_stats() for driversWANG Cong1-9/+1
There are many drivers calling alloc_percpu() to allocate pcpu stats and then initializing ->syncp. So just introduce a helper function for them. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-07Merge branch 'master' of ↵David S. Miller1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch Jesse Gross says: ==================== [GIT net-next] Open vSwitch Open vSwitch changes for net-next/3.14. Highlights are: * Performance improvements in the mechanism to get packets to userspace using memory mapped netlink and skb zero copy where appropriate. * Per-cpu flow stats in situations where flows are likely to be shared across CPUs. Standard flow stats are used in other situations to save memory and allocation time. * A handful of code cleanups and rationalization. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-07ovs: make functions localStephen Hemminger1-1/+5
Several functions and datastructures could be local Found with 'make namespacecheck' Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-01-05net: unify the pcpu_tstats and br_cpu_netstats as oneLi RongQing1-6/+6
They are same, so unify them as one, pcpu_sw_netstats. Define pcpu_sw_netstat in netdevice.h, remove pcpu_tstats from if_tunnel and remove br_cpu_netstats from br_private.h Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-06net: Explicitly initialize u64_stats_sync structures for lockdepJohn Stultz1-0/+8
In order to enable lockdep on seqcount/seqlock structures, we must explicitly initialize any locks. The u64_stats_sync structure, uses a seqcount, and thus we need to introduce a u64_stats_init() function and use it to initialize the structure. This unfortunately adds a lot of fairly trivial initialization code to a number of drivers. But the benefit of ensuring correctness makes this worth while. Because these changes are required for lockdep to be enabled, and the changes are quite trivial, I've not yet split this patch out into 30-some separate patches, as I figured it would be better to get the various maintainers thoughts on how to best merge this change along with the seqcount lockdep enablement. Feedback would be appreciated! Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: James Morris <jmorris@namei.org> Cc: Jesse Gross <jesse@nicira.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mirko Lindner <mlindner@marvell.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Roger Luethi <rl@hellgate.ch> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Horman <horms@verge.net.au> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Wensong Zhang <wensong@linux-vs.org> Cc: netdev@vger.kernel.org Link: http://lkml.kernel.org/r/1381186321-4906-2-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-08-24openvswitch: Fix argument descriptions in vport.c.Justin Pettit1-1/+2
Signed-off-by: Justin Pettit <jpettit@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-20openvswitch: Add vxlan tunneling support.Pravin B Shelar1-0/+3
Following patch adds vxlan vport type for openvswitch using vxlan api. So now there is vxlan dependency for openvswitch. CC: Jesse Gross <jesse@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>