summaryrefslogtreecommitdiff
path: root/net/rds/rdma.c
AgeCommit message (Collapse)AuthorFilesLines
2015-08-26RDS: Fix rds MR reference count in rds_rdma_unuse()santosh.shilimkar@oracle.com1-2/+3
rds_rdma_unuse() drops the mr reference count which it hasn't taken. Correct way of removing mr is to remove mr from the tree and then rdma_destroy_mr() it first, then rds_mr_put() to decrement its reference count. Whichever thread holds last reference will free the mr via rds_mr_put() This bug was triggering weird null pointer crashes. One if the trace for it is captured below. BUG: unable to handle kernel NULL pointer dereference at 0000000000000104 IP: [<ffffffffa0899471>] rds_ib_free_mr+0x31/0x130 [rds_rdma] PGD 4366fa067 PUD 4366f9067 PMD 0 Oops: 0000 [#1] SMP [...] task: ffff88046da6a000 ti: ffff88046da6c000 task.ti: ffff88046da6c000 RIP: 0010:[<ffffffffa0899471>] [<ffffffffa0899471>] rds_ib_free_mr+0x31/0x130 [rds_rdma] RSP: 0018:ffff88046fa43bd8 EFLAGS: 00010286 RAX: 0000000071d38b80 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff880079e7ff40 RBP: ffff88046fa43bf8 R08: 0000000000000000 R09: 0000000000000000 R10: ffff88046fa43ca8 R11: ffff88046a802ed8 R12: ffff880079e7fa40 R13: 0000000000000000 R14: ffff880079e7ff40 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88046fa40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000104 CR3: 00000004366fb000 CR4: 00000000000006e0 Stack: ffff880079e7fa40 ffff880671d38f08 ffff880079e7ff40 0000000000000296 ffff88046fa43c28 ffffffffa087a38b ffff880079e7fa40 ffff880671d38f10 0000000000000000 0000000000000292 ffff88046fa43c48 ffffffffa087a3b6 Call Trace: <IRQ> [<ffffffffa087a38b>] rds_destroy_mr+0x8b/0xa0 [rds] [<ffffffffa087a3b6>] __rds_put_mr_final+0x16/0x30 [rds] [<ffffffffa087a492>] rds_rdma_unuse+0xc2/0x120 [rds] [<ffffffffa08766d3>] rds_recv_incoming_exthdrs+0x83/0xa0 [rds] [<ffffffffa0876782>] rds_recv_incoming+0x92/0x200 [rds] [<ffffffffa0895269>] rds_ib_process_recv+0x259/0x320 [rds_rdma] [<ffffffffa08962a8>] rds_ib_recv_tasklet_fn+0x1a8/0x490 [rds_rdma] [<ffffffff810dcd78>] ? __remove_hrtimer+0x58/0x90 [<ffffffff810799e1>] tasklet_action+0xb1/0xc0 [<ffffffff81079b52>] __do_softirq+0xe2/0x290 [<ffffffff81079df6>] irq_exit+0xa6/0xb0 [<ffffffff81613915>] do_IRQ+0x65/0xf0 [<ffffffff816118ab>] common_interrupt+0x6b/0x6b Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25RDS: Fix assertion level from fatal to warningsantosh.shilimkar@oracle.com1-1/+1
Fix the asserion level since its not fatal and can be hit in normal execution paths. There is no need to take the system down. We keep the WARN_ON() to detect the condition if we get here with bad pages. Reviewed-by: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25RDS: restore return value in rds_cmsg_rdma_args()santosh.shilimkar@oracle.com1-0/+2
In rds_cmsg_rdma_args() 'ret' is used by rds_pin_pages() which returns number of pinned pages on success. And the same value is returned to the caller of rds_cmsg_rdma_args() on success which is not intended. Commit f4a3fc03c1d7 ("RDS: Clean up error handling in rds_cmsg_rdma_args") removed the 'ret = 0' line which broke RDS RDMA mode. Fix it by restoring the return value on rds_pin_pages() success keeping the clean-up in place. Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15rds: avoid calling sock_kfree_s() on allocation failureCong Wang1-3/+4
It is okay to free a NULL pointer but not okay to mischarge the socket optmem accounting. Compile test only. Reported-by: rucsoftsec@gmail.com Cc: Chien Yen <chien.yen@oracle.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17rds: Integer overflow in RDS cmsg handlingDan Rosenberg1-1/+1
In rds_cmsg_rdma_args(), the user-provided args->nr_local value is restricted to less than UINT_MAX. This seems to need a tighter upper bound, since the calculation of total iov_size can overflow, resulting in a small sock_kmalloc() allocation. This would probably just result in walking off the heap and crashing when calling rds_rdma_pages() with a high count value. If it somehow doesn't crash here, then memory corruption could occur soon after. Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-31RDS: Let rds_message_alloc_sgs() return NULLAndy Grover1-0/+8
Even with the previous fix, we still are reading the iovecs once to determine SGs needed, and then again later on. Preallocating space for sg lists as part of rds_message seemed like a good idea but it might be better to not do this. While working to redo that code, this patch attempts to protect against userspace rewriting the rds_iovec array between the first and second accesses. The consequences of this would be either a too-small or too-large sg list array. Too large is not an issue. This patch changes all callers of message_alloc_sgs to handle running out of preallocated sgs, and fail gracefully. Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-31RDS: Copy rds_iovecs into kernel memory instead of rereading from userspaceAndy Grover1-39/+65
Change rds_rdma_pages to take a passed-in rds_iovec array instead of doing copy_from_user itself. Change rds_cmsg_rdma_args to copy rds_iovec array once only. This eliminates the possibility of userspace changing it after our sanity checks. Implement stack-based storage for small numbers of iovecs, based on net/socket.c, to save an alloc in the extremely common case. Although this patch reduces iovec copies in cmsg_rdma_args to 1, we still do another one in rds_rdma_extra_size. Getting rid of that one will be trickier, so it'll be a separate patch. Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-31RDS: Clean up error handling in rds_cmsg_rdma_argsAndy Grover1-3/+2
We don't need to set ret = 0 at the end -- it's initialized to 0. Also, don't increment s_send_rdma stat if we're exiting with an error. Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-31RDS: Return -EINVAL if rds_rdma_pages returns an errorAndy Grover1-1/+3
rds_cmsg_rdma_args would still return success even if rds_rdma_pages returned an error (or overflowed). Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-31net: fix rds_iovec page count overflowLinus Torvalds1-0/+7
As reported by Thomas Pollet, the rdma page counting can overflow. We get the rdma sizes in 64-bit unsigned entities, but then limit it to UINT_MAX bytes and shift them down to pages (so with a possible "+1" for an unaligned address). So each individual page count fits comfortably in an 'unsigned int' (not even close to overflowing into signed), but as they are added up, they might end up resulting in a signed return value. Which would be wrong. Catch the case of tot_pages turning negative, and return the appropriate error code. Reported-by: Thomas Pollet <thomas.pollet@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-19rds: signedness bugDan Carpenter1-1/+1
In the original code if the copy_from_user() fails in rds_rdma_pages() then the error handling fails and we get a stack trace from kmalloc(). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-09RDS: Implement masked atomic operationsAndy Grover1-6/+27
Add two CMSGs for masked versions of cswp and fadd. args struct modified to use a union for different atomic op type's arguments. Change IB to do masked atomic ops. Atomic op type in rds_message similarly unionized. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-09RDS: Add flag for silent ops. Do atomic op before RDMAAndy Grover1-0/+2
Add a flag to the API so users can indicate they want silent operations. This is needed because silent ops cannot be used with USE_ONCE MRs, so we can't just assume silent. Also, change send_xmit to do atomic op before rdma op if both are present, and centralize the hairy logic to determine if we want to attempt silent, or not. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-09RDS: Move some variables around for consistencyAndy Grover1-2/+1
Also, add a comment. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-09RDS: Remove struct rds_rdma_opAndy Grover1-29/+29
A big changeset, but it's all pretty dumb. struct rds_rdma_op was already embedded in struct rm_rdma_op. Remove rds_rdma_op and put its members in rm_rdma_op. Rename members with "op_" prefix instead of "r_", for consistency. Of course this breaks a lot, so fixup the code accordingly. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-09RDS: purge atomic resources too in rds_message_purge()Andy Grover1-0/+16
Add atomic_free_op function, analogous to rdma_free_op, and call it in rds_message_purge(). Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-09RDS: Inline rdma_prepare into cmsg_rdma_argsAndy Grover1-26/+12
cmsg_rdma_args just calls rdma_prepare and does a little arg checking -- not quite enough to justify its existence. Plus, it is the only caller of rdma_prepare(). Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-09RDS: WhitespaceAndy Grover1-1/+0
Tidy up some whitespace issues. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-09RDS: Do not mask address when pinning pagesAndy Grover1-2/+2
This does not appear to be necessary. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-09RDS: Base init_depth and responder_resources on hw valuesAndy Grover1-2/+1
Instead of using a constant for initiator_depth and responder_resources, read the per-QP values when the device is enumerated, and then use these values when creating the connection. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-09RDS: Implement atomic operationsAndy Grover1-0/+73
Implement a CMSG-based interface to do FADD and CSWP ops. Alter send routines to handle atomic ops. Add atomic counters to stats. Add xmit_atomic() to struct rds_transport Inline rds_ib_send_unmap_rdma into unmap_rm Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-09RDS: make sure all sgs alloced are initializedAndy Grover1-2/+1
rds_message_alloc_sgs() now returns correctly-initialized sg lists, so calleds need not do this themselves. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-09RDS: make m_rdma_op a member of rds_messageAndy Grover1-53/+60
This eliminates a separate memory alloc, although it is now necessary to add an "r_active" flag, since it is no longer to use the m_rdma_op pointer as an indicator of if an rdma op is present. rdma SGs allocated from rm sg pool. rds_rm_size also gets bigger. It's a little inefficient to run through CMSGs twice, but it makes later steps a lot smoother. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-09RDS: fold rdma.h into rds.hAndy Grover1-1/+1
RDMA is now an intrinsic part of RDS, so it's easier to just have a single header. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-09RDS: cleanup/fix rds_rdma_unuseAndy Grover1-12/+15
First, it looks to me like the atomic_inc is wrong. We should be decrementing refcount only once here, no? It's already being done by the mr_put() at the end. Second, simplify the logic a bit by bailing early (with a warning) if !mr. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-09RDS: break out rdma and data ops into nested structs in rds_messageAndy Grover1-4/+5
Clearly separate rdma-related variables in rm from data-related ones. This is in anticipation of adding atomic support. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-09RDS: cleanup: remove "== NULL"s and "!= NULL"s in ptr comparisonsAndy Grover1-9/+9
Favor "if (foo)" style over "if (foo != NULL)". Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-09RDS: Fix corrupted rds_mrsTina Yang1-0/+8
On second look at this bug (OFED #2002), it seems that the collision is not with the retransmission queue (packet acked by the peer), but with the local send completion. A theoretical sequence of events (from time t0 to t3) is thought to be as follows, Thread #1 t0: sock_release rds_release rds_send_drop_to /* wait on send completion */ t2: rds_rdma_drop_keys() /* destroy & free all mrs */ Thread #2 t1: rds_ib_send_cq_comp_handler rds_ib_send_unmap_rm rds_message_unmapped /* wake up #1 @ t0 */ t3: rds_message_put rds_message_purge rds_mr_put /* memory corruption detected */ The problem with the rds_rdma_drop_keys() is it could remove a mr's refcount more than its due (i.e. repeatedly as long as it still remains in the tree (mr->r_refcount > 0)). Theoretically it should remove only one reference - reference by the tree. /* Release any MRs associated with this socket */ while ((node = rb_first(&rs->rs_rdma_keys))) { mr = container_of(node, struct rds_mr, r_rb_node); if (mr->r_trans == rs->rs_transport) mr->r_invalidate = 0; rds_mr_put(mr); } I think the correct way of doing it is to remove the mr from the tree and rds_destroy_mr it first, then a rds_mr_put() to decrement its reference count by one. Whichever thread holds the last reference will free the mr via rds_mr_put(). Signed-off-by: Tina Yang <tina.yang@oracle.com> Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-09RDS: Fix BUG_ONs to not fire when in a taskletAndy Grover1-1/+1
in_interrupt() is true in softirqs. The BUG_ONs are supposed to check for if irqs are disabled, so we should use BUG_ON(irqs_disabled()) instead, duh. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-04-12Merge branch 'master' of ↵David S. Miller1-0/+1
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/stmmac/stmmac_main.c drivers/net/wireless/wl12xx/wl1271_cmd.c drivers/net/wireless/wl12xx/wl1271_main.c drivers/net/wireless/wl12xx/wl1271_spi.c net/core/ethtool.c net/mac80211/scan.c
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-17RDS: Do not call set_page_dirty() with irqs offAndy Grover1-1/+3
set_page_dirty() unconditionally re-enables interrupts, so if we call it with irqs off, they will be on after the call, and that's bad. This patch moves the call after we've re-enabled interrupts in send_drop_to(), so it's safe. Also, add BUG_ONs to let us know if we ever do call set_page_dirty with interrupts off. Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-30net: Move && and || to end of previous lineJoe Perches1-6/+6
Not including net/atm/ Compiled tested x86 allyesconfig only Added a > 80 column line or two, which I ignored. Existing checkpatch plaints willfully, cheerfully ignored. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-31RDS: Add GET_MR_FOR_DEST sockoptAndy Grover1-0/+24
RDS currently supports a GET_MR sockopt to establish a memory region (MR) for a chunk of memory. However, the fastreg method ties a MR to a particular destination. The GET_MR_FOR_DEST sockopt allows the remote machine to be specified, and thus support for fastreg (aka FRWRs). Note that this patch does *not* do all of this - it simply implements the new sockopt in terms of the old one, so applications can begin to use the new sockopt in preparation for cutover to FRWRs. Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-10RDS: use get_user_pages_fast()Andy Grover1-4/+1
Use the new function that is simpler and faster. Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-10RDS: Fix ordering in a conditionalAndy Grover1-1/+1
Putting the constant first is a supposed "best practice" that actually makes the code harder to read. Thanks to Roland Dreier for finding a bug in this "simple, obviously correct" patch. Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27RDS: RDMA supportAndy Grover1-0/+679
Some transports may support RDMA features. This handles the non-transport-specific parts, like pinning user pages and tracking mapped regions. Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>