summaryrefslogtreecommitdiff
path: root/net/rfkill/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-24rfkill: remove rfkill-regulatorJohannes Berg1-11/+0
There are no users of this ("vrfkill") in the tree, so it's just dead code - remove it. This also isn't really how rfkill is supposed to be used - it's intended as a signalling mechanism to/from the device, which the driver (and partially cfg80211) will handle - having a separate rfkill instance for a regulator is confusing, the driver should use the regulator instead to turn off the device when requested. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24net: rfkill: gpio: remove rfkill_gpio_platform_dataHeikki Krogerus1-2/+1
No more users for it. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-13rfkill: Allow compile test of GPIO consumers if !GPIOLIBGeert Uytterhoeven1-1/+2
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28net: rfkill: gpio: clean up clock handlingHeikki Krogerus1-1/+1
Use a simple flag to see the state of the clock, and make the clock available even without a name. Also, get rid of HAVE_CLK dependency. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-05-19net: rfkill: add generic gpio rfkill driverRhyland Klein1-0/+9
This adds a new generic gpio rfkill driver to support rfkill switches which are controlled by gpios. The driver also supports passing in data about the clock for the radio, so that when rfkill is blocking, it can disable the clock. This driver assumes platform data is passed from the board files to configure it for specific devices. Original-patch-by: Anantha Idapalapati <aidapalapati@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-19rfkill: Regulator consumer driver for rfkillAntonio Ospite1-0/+11
Add a regulator consumer driver for rfkill to enable controlling radio transmitters connected to voltage regulators using the regulator framework. A new "vrfkill" virtual supply is provided to use in platform code. Signed-off-by: Guiming Zhuo <gmzhuo@gmail.com> Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-21kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes1-2/+2
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-10rfkill: remove input KconfigJohannes Berg1-1/+1
Now that we added the ioctl, there's no need to ask the user to configure this. We will keep it enabled for now, and eventually swap the default to n. Also let embedded users select it only if they need it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03rfkill: create useful userspace interfaceJohannes Berg1-2/+2
The new code added by this patch will make rfkill create a misc character device /dev/rfkill that userspace can use to control rfkill soft blocks and get status of devices as well as events when the status changes. Using it is very simple -- when you open it you can read a number of times to get the initial state, and every further read blocks (you can poll) on getting the next event from the kernel. The same structure you read is also used when writing to it to change the soft block of a given device, all devices of a given type, or all devices. This also makes CONFIG_RFKILL_INPUT selectable again in order to be able to test without it present since its functionality can now be replaced by userspace entirely and distros and users may not want the input part of rfkill interfering with their userspace code. We will also write a userspace daemon to handle all that and consequently add the input code to the feature removal schedule. In order to have rfkilld support both kernels with and without CONFIG_RFKILL_INPUT (or new kernels after its eventual removal) we also add an ioctl (that only exists if rfkill-input is present) to disable rfkill-input. It is not very efficient, but at least gives the correct behaviour in all cases. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03rfkill: rewriteJohannes Berg1-14/+7
This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-11[RFKILL]: Add support for an rfkill LED.Michael Buesch1-0/+7
This adds a LED trigger. Signed-off-by: Michael Buesch <mb@bu3sch.de> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[RFKILL]: Remove IRDAIvo van Doorn1-1/+1
As Dmitry pointed out earlier, rfkill-input.c doesn't support irda because there are no users and we shouldn't add unrequired KEY_ defines. However, RFKILL_TYPE_IRDA was defined in the rfkill.h header file and would confuse people about whether it is implemented or not. This patch removes IRDA support completely, so it can be added whenever a driver wants the feature. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-07[NET]: rfkill: add support for input key to control wireless radioIvo van Doorn1-0/+24
The RF kill patch that provides infrastructure for implementing switches controlling radio states on various network and other cards. [dtor@insightbb.com: address review comments] [akpm@linux-foundation.org: cleanups, build fixes] Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: David S. Miller <davem@davemloft.net>