Age | Commit message (Collapse) | Author | Files | Lines | |
---|---|---|---|---|---|
2021-06-23 | net: sched: remove qdisc->empty for lockless qdisc | Yunsheng Lin | 1 | -3/+0 | |
As MISSED and DRAINING state are used to indicate a non-empty qdisc, qdisc->empty is not longer needed, so remove it. Acked-by: Jakub Kicinski <kuba@kernel.org> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # flexcan Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2021-06-23 | net: sched: implement TCQ_F_CAN_BYPASS for lockless qdisc | Yunsheng Lin | 1 | -4/+16 | |
Currently pfifo_fast has both TCQ_F_CAN_BYPASS and TCQ_F_NOLOCK flag set, but queue discipline by-pass does not work for lockless qdisc because skb is always enqueued to qdisc even when the qdisc is empty, see __dev_xmit_skb(). This patch calls sch_direct_xmit() to transmit the skb directly to the driver for empty lockless qdisc, which aviod enqueuing and dequeuing operation. As qdisc->empty is not reliable to indicate a empty qdisc because there is a time window between enqueuing and setting qdisc->empty. So we use the MISSED state added in commit a90c57f2cedd ("net: sched: fix packet stuck problem for lockless qdisc"), which indicate there is lock contention, suggesting that it is better not to do the qdisc bypass in order to avoid packet out of order problem. In order to make MISSED state reliable to indicate a empty qdisc, we need to ensure that testing and clearing of MISSED state is within the protection of qdisc->seqlock, only setting MISSED state can be done without the protection of qdisc->seqlock. A MISSED state testing is added without the protection of qdisc->seqlock to aviod doing unnecessary spin_trylock() for contention case. As the enqueuing is not within the protection of qdisc->seqlock, there is still a potential data race as mentioned by Jakub [1]: thread1 thread2 thread3 qdisc_run_begin() # true qdisc_run_begin(q) set(MISSED) pfifo_fast_dequeue clear(MISSED) # recheck the queue qdisc_run_end() enqueue skb1 qdisc empty # true qdisc_run_begin() # true sch_direct_xmit() # skb2 qdisc_run_begin() set(MISSED) When above happens, skb1 enqueued by thread2 is transmited after skb2 is transmited by thread3 because MISSED state setting and enqueuing is not under the qdisc->seqlock. If qdisc bypass is disabled, skb1 has better chance to be transmited quicker than skb2. This patch does not take care of the above data race, because we view this as similar as below: Even at the same time CPU1 and CPU2 write the skb to two socket which both heading to the same qdisc, there is no guarantee that which skb will hit the qdisc first, because there is a lot of factor like interrupt/softirq/cache miss/scheduling afffecting that. There are below cases that need special handling: 1. When MISSED state is cleared before another round of dequeuing in pfifo_fast_dequeue(), and __qdisc_run() might not be able to dequeue all skb in one round and call __netif_schedule(), which might result in a non-empty qdisc without MISSED set. In order to avoid this, the MISSED state is set for lockless qdisc and __netif_schedule() will be called at the end of qdisc_run_end. 2. The MISSED state also need to be set for lockless qdisc instead of calling __netif_schedule() directly when requeuing a skb for a similar reason. 3. For netdev queue stopped case, the MISSED case need clearing while the netdev queue is stopped, otherwise there may be unnecessary __netif_schedule() calling. So a new DRAINING state is added to indicate this case, which also indicate a non-empty qdisc. 4. As there is already netif_xmit_frozen_or_stopped() checking in dequeue_skb() and sch_direct_xmit(), which are both within the protection of qdisc->seqlock, but the same checking in __dev_xmit_skb() is without the protection, which might cause empty indication of a lockless qdisc to be not reliable. So remove the checking in __dev_xmit_skb(), and the checking in the protection of qdisc->seqlock seems enough to avoid the cpu consumption problem for netdev queue stopped case. 1. https://lkml.org/lkml/2021/5/29/215 Acked-by: Jakub Kicinski <kuba@kernel.org> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # flexcan Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2021-06-03 | mlx5: count all link events | Jakub Kicinski | 1 | -0/+18 | |
mlx5 devices were observed generating MLX5_PORT_CHANGE_SUBTYPE_ACTIVE events without an intervening MLX5_PORT_CHANGE_SUBTYPE_DOWN. This breaks link flap detection based on Linux carrier state transition count as netif_carrier_on() does nothing if carrier is already on. Make sure we count such events. netif_carrier_event() increments the counters and fires the linkwatch events. The latter is not necessary for the use case but seems like the right thing to do. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> | |||||
2021-05-15 | net: sched: fix tx action reschedule issue with stopped queue | Yunsheng Lin | 1 | -1/+26 | |
The netdev qeueue might be stopped when byte queue limit has reached or tx hw ring is full, net_tx_action() may still be rescheduled if STATE_MISSED is set, which consumes unnecessary cpu without dequeuing and transmiting any skb because the netdev queue is stopped, see qdisc_run_end(). This patch fixes it by checking the netdev queue state before calling qdisc_run() and clearing STATE_MISSED if netdev queue is stopped during qdisc_run(), the net_tx_action() is rescheduled again when netdev qeueue is restarted, see netif_tx_wake_queue(). As there is time window between netif_xmit_frozen_or_stopped() checking and STATE_MISSED clearing, between which STATE_MISSED may set by net_tx_action() scheduled by netif_tx_wake_queue(), so set the STATE_MISSED again if netdev queue is restarted. Fixes: 6b3ba9146fe6 ("net: sched: allow qdiscs to handle locking") Reported-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2021-05-15 | net: sched: fix tx action rescheduling issue during deactivation | Yunsheng Lin | 1 | -1/+3 | |
Currently qdisc_run() checks the STATE_DEACTIVATED of lockless qdisc before calling __qdisc_run(), which ultimately clear the STATE_MISSED when all the skb is dequeued. If STATE_DEACTIVATED is set before clearing STATE_MISSED, there may be rescheduling of net_tx_action() at the end of qdisc_run_end(), see below: CPU0(net_tx_atcion) CPU1(__dev_xmit_skb) CPU2(dev_deactivate) . . . . set STATE_MISSED . . __netif_schedule() . . . set STATE_DEACTIVATED . . qdisc_reset() . . . .<--------------- . synchronize_net() clear __QDISC_STATE_SCHED | . . . | . . . | . some_qdisc_is_busy() . | . return *false* . | . . test STATE_DEACTIVATED | . . __qdisc_run() *not* called | . . . | . . test STATE_MISS | . . __netif_schedule()--------| . . . . . . . . __qdisc_run() is not called by net_tx_atcion() in CPU0 because CPU2 has set STATE_DEACTIVATED flag during dev_deactivate(), and STATE_MISSED is only cleared in __qdisc_run(), __netif_schedule is called at the end of qdisc_run_end(), causing tx action rescheduling problem. qdisc_run() called by net_tx_action() runs in the softirq context, which should has the same semantic as the qdisc_run() called by __dev_xmit_skb() protected by rcu_read_lock_bh(). And there is a synchronize_net() between STATE_DEACTIVATED flag being set and qdisc_reset()/some_qdisc_is_busy in dev_deactivate(), we can safely bail out for the deactived lockless qdisc in net_tx_action(), and qdisc_reset() will reset all skb not dequeued yet. So add the rcu_read_lock() explicitly to protect the qdisc_run() and do the STATE_DEACTIVATED checking in net_tx_action() before calling qdisc_run_begin(). Another option is to do the checking in the qdisc_run_end(), but it will add unnecessary overhead for non-tx_action case, because __dev_queue_xmit() will not see qdisc with STATE_DEACTIVATED after synchronize_net(), the qdisc with STATE_DEACTIVATED can only be seen by net_tx_action() because of __netif_schedule(). The STATE_DEACTIVATED checking in qdisc_run() is to avoid race between net_tx_action() and qdisc_reset(), see: commit d518d2ed8640 ("net/sched: fix race between deactivation and dequeue for NOLOCK qdisc"). As the bailout added above for deactived lockless qdisc in net_tx_action() provides better protection for the race without calling qdisc_run() at all, so remove the STATE_DEACTIVATED checking in qdisc_run(). After qdisc_reset(), there is no skb in qdisc to be dequeued, so clear the STATE_MISSED in dev_reset_queue() too. Fixes: 6b3ba9146fe6 ("net: sched: allow qdiscs to handle locking") Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> V8: Clearing STATE_MISSED before calling __netif_schedule() has avoid the endless rescheduling problem, but there may still be a unnecessary rescheduling, so adjust the commit log. Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2021-05-15 | net: sched: fix packet stuck problem for lockless qdisc | Yunsheng Lin | 1 | -0/+19 | |
Lockless qdisc has below concurrent problem: cpu0 cpu1 . . q->enqueue . . . qdisc_run_begin() . . . dequeue_skb() . . . sch_direct_xmit() . . . . q->enqueue . qdisc_run_begin() . return and do nothing . . qdisc_run_end() . cpu1 enqueue a skb without calling __qdisc_run() because cpu0 has not released the lock yet and spin_trylock() return false for cpu1 in qdisc_run_begin(), and cpu0 do not see the skb enqueued by cpu1 when calling dequeue_skb() because cpu1 may enqueue the skb after cpu0 calling dequeue_skb() and before cpu0 calling qdisc_run_end(). Lockless qdisc has below another concurrent problem when tx_action is involved: cpu0(serving tx_action) cpu1 cpu2 . . . . q->enqueue . . qdisc_run_begin() . . dequeue_skb() . . . q->enqueue . . . . sch_direct_xmit() . . . qdisc_run_begin() . . return and do nothing . . . clear __QDISC_STATE_SCHED . . qdisc_run_begin() . . return and do nothing . . . . . . qdisc_run_end() . This patch fixes the above data race by: 1. If the first spin_trylock() return false and STATE_MISSED is not set, set STATE_MISSED and retry another spin_trylock() in case other CPU may not see STATE_MISSED after it releases the lock. 2. reschedule if STATE_MISSED is set after the lock is released at the end of qdisc_run_end(). For tx_action case, STATE_MISSED is also set when cpu1 is at the end if qdisc_run_end(), so tx_action will be rescheduled again to dequeue the skb enqueued by cpu2. Clear STATE_MISSED before retrying a dequeuing when dequeuing returns NULL in order to reduce the overhead of the second spin_trylock() and __netif_schedule() calling. Also clear the STATE_MISSED before calling __netif_schedule() at the end of qdisc_run_end() to avoid doing another round of dequeuing in the pfifo_fast_dequeue(). The performance impact of this patch, tested using pktgen and dummy netdev with pfifo_fast qdisc attached: threads without+this_patch with+this_patch delta 1 2.61Mpps 2.60Mpps -0.3% 2 3.97Mpps 3.82Mpps -3.7% 4 5.62Mpps 5.59Mpps -0.5% 8 2.78Mpps 2.77Mpps -0.3% 16 2.22Mpps 2.22Mpps -0.0% Fixes: 6b3ba9146fe6 ("net: sched: allow qdiscs to handle locking") Acked-by: Jakub Kicinski <kuba@kernel.org> Tested-by: Juergen Gross <jgross@suse.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2021-03-14 | net/sched: act_police: add support for packet-per-second policing | Baowen Zheng | 1 | -25/+50 | |
Allow a policer action to enforce a rate-limit based on packets-per-second, configurable using a packet-per-second rate and burst parameters. e.g. tc filter add dev tap1 parent ffff: u32 match \ u32 0 0 police pkts_rate 3000 pkts_burst 1000 Testing was unable to uncover a performance impact of this change on existing features. Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Louis Peens <louis.peens@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2020-10-09 | net/sched: get rid of qdisc->padded | Eric Dumazet | 1 | -18/+5 | |
kmalloc() of sufficiently big portion of memory is cache-aligned in regular conditions. If some debugging options are used, there is no reason qdisc structures would need 64-byte alignment if most other kernel structures are not aligned. This get rid of QDISC_ALIGN and QDISC_ALIGNTO. Addition of privdata field will help implementing the reverse of qdisc_priv() and documents where the private data is. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Allen Pais <allen.lkml@gmail.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | |||||
2020-09-10 | net: sch_generic: aviod concurrent reset and enqueue op for lockless qdisc | Yunsheng Lin | 1 | -15/+33 | |
Currently there is concurrent reset and enqueue operation for the same lockless qdisc when there is no lock to synchronize the q->enqueue() in __dev_xmit_skb() with the qdisc reset operation in qdisc_deactivate() called by dev_deactivate_queue(), which may cause out-of-bounds access for priv->ring[] in hns3 driver if user has requested a smaller queue num when __dev_xmit_skb() still enqueue a skb with a larger queue_mapping after the corresponding qdisc is reset, and call hns3_nic_net_xmit() with that skb later. Reused the existing synchronize_net() in dev_deactivate_many() to make sure skb with larger queue_mapping enqueued to old qdisc(which is saved in dev_queue->qdisc_sleeping) will always be reset when dev_reset_queue() is called. Fixes: 6b3ba9146fe6 ("net: sched: allow qdiscs to handle locking") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2020-06-09 | net: sched: export __netdev_watchdog_up() | Valentin Longchamp | 1 | -0/+1 | |
Since the quiesce/activate rework, __netdev_watchdog_up() is directly called in the ucc_geth driver. Unfortunately, this function is not available for modules and thus ucc_geth cannot be built as a module anymore. Fix it by exporting __netdev_watchdog_up(). Since the commit introducing the regression was backported to stable branches, this one should ideally be as well. Fixes: 79dde73cf9bc ("net/ethernet/freescale: rework quiesce/activate for ucc_geth") Signed-off-by: Valentin Longchamp <valentin@longchamp.me> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2020-05-28 | net_sched: get rid of unnecessary dev_qdisc_reset() | Cong Wang | 1 | -16/+0 | |
Resetting old qdisc on dev_queue->qdisc_sleeping in dev_qdisc_reset() is redundant, because this qdisc, even if not same with dev_queue->qdisc, is reset via qdisc_put() right after calling dev_graft_qdisc() when hitting refcnt 0. This is very easy to observe with qdisc_reset() tracepoint and stack traces. Reported-by: Václav Zindulka <vaclav.zindulka@tlapnet.cz> Tested-by: Václav Zindulka <vaclav.zindulka@tlapnet.cz> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2020-05-28 | net_sched: avoid resetting active qdisc for multiple times | Cong Wang | 1 | -14/+23 | |
Except for sch_mq and sch_mqprio, each dev queue points to the same root qdisc, so when we reset the dev queues with netdev_for_each_tx_queue() we end up resetting the same instance of the root qdisc for multiple times. Avoid this by checking the __QDISC_STATE_DEACTIVATED bit in each iteration, so for sch_mq/sch_mqprio, we still reset all of them like before, for the rest, we only reset it once. Reported-by: Václav Zindulka <vaclav.zindulka@tlapnet.cz> Tested-by: Václav Zindulka <vaclav.zindulka@tlapnet.cz> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2020-05-28 | net_sched: add a tracepoint for qdisc creation | Cong Wang | 1 | -1/+3 | |
With this tracepoint, we could know when qdisc's are created, especially those default qdisc's. Sample output: tc-736 [001] ...1 56.230107: qdisc_create: dev=ens3 kind=pfifo parent=1:0 tc-736 [001] ...1 56.230113: qdisc_create: dev=ens3 kind=hfsc parent=ffff:ffff tc-738 [001] ...1 56.256816: qdisc_create: dev=ens3 kind=pfifo parent=1:100 tc-739 [001] ...1 56.267584: qdisc_create: dev=ens3 kind=pfifo parent=1:200 tc-740 [001] ...1 56.279649: qdisc_create: dev=ens3 kind=fq_codel parent=1:100 tc-741 [001] ...1 56.289996: qdisc_create: dev=ens3 kind=pfifo_fast parent=1:200 tc-745 [000] .N.1 111.687483: qdisc_create: dev=ens3 kind=ingress parent=ffff:fff1 Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2020-05-28 | net_sched: add tracepoints for qdisc_reset() and qdisc_destroy() | Cong Wang | 1 | -0/+4 | |
Add two tracepoints for qdisc_reset() and qdisc_destroy() to track qdisc resetting and destroying. Sample output: tc-756 [000] ...3 138.355662: qdisc_reset: dev=ens3 kind=pfifo_fast parent=ffff:ffff handle=0:0 tc-756 [000] ...1 138.355720: qdisc_reset: dev=ens3 kind=pfifo_fast parent=ffff:ffff handle=0:0 tc-756 [000] ...1 138.355867: qdisc_reset: dev=ens3 kind=pfifo_fast parent=ffff:ffff handle=0:0 tc-756 [000] ...1 138.355930: qdisc_destroy: dev=ens3 kind=pfifo_fast parent=ffff:ffff handle=0:0 tc-757 [000] ...2 143.073780: qdisc_reset: dev=ens3 kind=fq_codel parent=ffff:ffff handle=8001:0 tc-757 [000] ...1 143.073878: qdisc_reset: dev=ens3 kind=fq_codel parent=ffff:ffff handle=8001:0 tc-757 [000] ...1 143.074114: qdisc_reset: dev=ens3 kind=fq_codel parent=ffff:ffff handle=8001:0 tc-757 [000] ...1 143.074228: qdisc_destroy: dev=ens3 kind=fq_codel parent=ffff:ffff handle=8001:0 Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2020-05-28 | net_sched: use qdisc_reset() in qdisc_destroy() | Cong Wang | 1 | -13/+3 | |
qdisc_destroy() calls ops->reset() and cleans up qdisc->gso_skb and qdisc->skb_bad_txq, these are nearly same with qdisc_reset(), so just call it directly, and cosolidate the code for the next patch. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2020-05-04 | net: partially revert dynamic lockdep key changes | Cong Wang | 1 | -6/+11 | |
This patch reverts the folowing commits: commit 064ff66e2bef84f1153087612032b5b9eab005bd "bonding: add missing netdev_update_lockdep_key()" commit 53d374979ef147ab51f5d632dfe20b14aebeccd0 "net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()" commit 1f26c0d3d24125992ab0026b0dab16c08df947c7 "net: fix kernel-doc warning in <linux/netdevice.h>" commit ab92d68fc22f9afab480153bd82a20f6e2533769 "net: core: add generic lockdep keys" but keeps the addr_list_lock_key because we still lock addr_list_lock nestedly on stack devices, unlikely xmit_lock this is safe because we don't take addr_list_lock on any fast path. Reported-and-tested-by: syzbot+aaa6fa4949cc5d9b7b25@syzkaller.appspotmail.com Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2020-05-04 | net: sched: fallback to qdisc noqueue if default qdisc setup fail | Jesper Dangaard Brouer | 1 | -3/+14 | |
Currently if the default qdisc setup/init fails, the device ends up with qdisc "noop", which causes all TX packets to get dropped. With the introduction of sysctl net/core/default_qdisc it is possible to change the default qdisc to be more advanced, which opens for the possibility that Qdisc_ops->init() can fail. This patch detect these kind of failures, and choose to fallback to qdisc "noqueue", which is so simple that its init call will not fail. This allows the interface to continue functioning. V2: As this also captures memory failures, which are transient, the device is not kept in IFF_NO_QUEUE state. This allows the net_device to retry to default qdisc assignment. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2020-02-20 | net: sched: Pass ingress block to tcf_classify_ingress | Paul Blakey | 1 | -0/+8 | |
On ingress and cls_act qdiscs init, save the block on ingress mini_Qdisc and and pass it on to ingress classification, so it can be used for the looking up a specified chain index. Co-developed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||||
2019-12-13 | netdev: pass the stuck queue to the timeout handler | Michael S. Tsirkin | 1 | -1/+1 | |
This allows incrementing the correct timeout statistic without any mess. Down the road, devices can learn to reset just the specific queue. The patch was generated with the following script: use strict; use warnings; our $^I = '.bak'; my @work = ( ["arch/m68k/emu/nfeth.c", "nfeth_tx_timeout"], ["arch/um/drivers/net_kern.c", "uml_net_tx_timeout"], ["arch/um/drivers/vector_kern.c", "vector_net_tx_timeout"], ["arch/xtensa/platforms/iss/network.c", "iss_net_tx_timeout"], ["drivers/char/pcmcia/synclink_cs.c", "hdlcdev_tx_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/message/fusion/mptlan.c", "mpt_lan_tx_timeout"], ["drivers/misc/sgi-xp/xpnet.c", "xpnet_dev_tx_timeout"], ["drivers/net/appletalk/cops.c", "cops_timeout"], ["drivers/net/arcnet/arcdevice.h", "arcnet_timeout"], ["drivers/net/arcnet/arcnet.c", "arcnet_timeout"], ["drivers/net/arcnet/com20020.c", "arcnet_timeout"], ["drivers/net/ethernet/3com/3c509.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c515.c", "corkscrew_timeout"], ["drivers/net/ethernet/3com/3c574_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c589_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/typhoon.c", "typhoon_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "eip_tx_timeout"], ["drivers/net/ethernet/8390/8390.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390p.c", "eip_tx_timeout"], ["drivers/net/ethernet/8390/ax88796.c", "ax_ei_tx_timeout"], ["drivers/net/ethernet/8390/axnet_cs.c", "axnet_tx_timeout"], ["drivers/net/ethernet/8390/etherh.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/hydra.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mac8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mcf8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/lib8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/ne2k-pci.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/pcnet_cs.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/smc-ultra.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/wd.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/zorro8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/adaptec/starfire.c", "tx_timeout"], ["drivers/net/ethernet/agere/et131x.c", "et131x_tx_timeout"], ["drivers/net/ethernet/allwinner/sun4i-emac.c", "emac_timeout"], ["drivers/net/ethernet/alteon/acenic.c", "ace_watchdog"], ["drivers/net/ethernet/amazon/ena/ena_netdev.c", "ena_tx_timeout"], ["drivers/net/ethernet/amd/7990.h", "lance_tx_timeout"], ["drivers/net/ethernet/amd/7990.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/a2065.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/am79c961a.c", "am79c961_timeout"], ["drivers/net/ethernet/amd/amd8111e.c", "amd8111e_tx_timeout"], ["drivers/net/ethernet/amd/ariadne.c", "ariadne_tx_timeout"], ["drivers/net/ethernet/amd/atarilance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/au1000_eth.c", "au1000_tx_timeout"], ["drivers/net/ethernet/amd/declance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/lance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/mvme147.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/ni65.c", "ni65_timeout"], ["drivers/net/ethernet/amd/nmclan_cs.c", "mace_tx_timeout"], ["drivers/net/ethernet/amd/pcnet32.c", "pcnet32_tx_timeout"], ["drivers/net/ethernet/amd/sunlance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/xgbe/xgbe-drv.c", "xgbe_tx_timeout"], ["drivers/net/ethernet/apm/xgene-v2/main.c", "xge_timeout"], ["drivers/net/ethernet/apm/xgene/xgene_enet_main.c", "xgene_enet_timeout"], ["drivers/net/ethernet/apple/macmace.c", "mace_tx_timeout"], ["drivers/net/ethernet/atheros/ag71xx.c", "ag71xx_tx_timeout"], ["drivers/net/ethernet/atheros/alx/main.c", "alx_tx_timeout"], ["drivers/net/ethernet/atheros/atl1c/atl1c_main.c", "atl1c_tx_timeout"], ["drivers/net/ethernet/atheros/atl1e/atl1e_main.c", "atl1e_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl1.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl2.c", "atl2_tx_timeout"], ["drivers/net/ethernet/broadcom/b44.c", "b44_tx_timeout"], ["drivers/net/ethernet/broadcom/bcmsysport.c", "bcm_sysport_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2.c", "bnx2_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnxt/bnxt.c", "bnxt_tx_timeout"], ["drivers/net/ethernet/broadcom/genet/bcmgenet.c", "bcmgenet_timeout"], ["drivers/net/ethernet/broadcom/sb1250-mac.c", "sbmac_tx_timeout"], ["drivers/net/ethernet/broadcom/tg3.c", "tg3_tx_timeout"], ["drivers/net/ethernet/calxeda/xgmac.c", "xgmac_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c", "lio_vf_rep_tx_timeout"], ["drivers/net/ethernet/cavium/thunder/nicvf_main.c", "nicvf_tx_timeout"], ["drivers/net/ethernet/cirrus/cs89x0.c", "net_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cortina/gemini.c", "gmac_tx_timeout"], ["drivers/net/ethernet/davicom/dm9000.c", "dm9000_timeout"], ["drivers/net/ethernet/dec/tulip/de2104x.c", "de_tx_timeout"], ["drivers/net/ethernet/dec/tulip/tulip_core.c", "tulip_tx_timeout"], ["drivers/net/ethernet/dec/tulip/winbond-840.c", "tx_timeout"], ["drivers/net/ethernet/dlink/dl2k.c", "rio_tx_timeout"], ["drivers/net/ethernet/dlink/sundance.c", "tx_timeout"], ["drivers/net/ethernet/emulex/benet/be_main.c", "be_tx_timeout"], ["drivers/net/ethernet/ethoc.c", "ethoc_tx_timeout"], ["drivers/net/ethernet/faraday/ftgmac100.c", "ftgmac100_tx_timeout"], ["drivers/net/ethernet/fealnx.c", "fealnx_tx_timeout"], ["drivers/net/ethernet/freescale/dpaa/dpaa_eth.c", "dpaa_tx_timeout"], ["drivers/net/ethernet/freescale/fec_main.c", "fec_timeout"], ["drivers/net/ethernet/freescale/fec_mpc52xx.c", "mpc52xx_fec_tx_timeout"], ["drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c", "fs_timeout"], ["drivers/net/ethernet/freescale/gianfar.c", "gfar_timeout"], ["drivers/net/ethernet/freescale/ucc_geth.c", "ucc_geth_timeout"], ["drivers/net/ethernet/fujitsu/fmvj18x_cs.c", "fjn_tx_timeout"], ["drivers/net/ethernet/google/gve/gve_main.c", "gve_tx_timeout"], ["drivers/net/ethernet/hisilicon/hip04_eth.c", "hip04_timeout"], ["drivers/net/ethernet/hisilicon/hix5hd2_gmac.c", "hix5hd2_net_timeout"], ["drivers/net/ethernet/hisilicon/hns/hns_enet.c", "hns_nic_net_timeout"], ["drivers/net/ethernet/hisilicon/hns3/hns3_enet.c", "hns3_nic_net_timeout"], ["drivers/net/ethernet/huawei/hinic/hinic_main.c", "hinic_tx_timeout"], ["drivers/net/ethernet/i825xx/82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/ether1.c", "ether1_timeout"], ["drivers/net/ethernet/i825xx/lib82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/sun3_82586.c", "sun3_82586_timeout"], ["drivers/net/ethernet/ibm/ehea/ehea_main.c", "ehea_tx_watchdog"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/ibmvnic.c", "ibmvnic_tx_timeout"], ["drivers/net/ethernet/intel/e100.c", "e100_tx_timeout"], ["drivers/net/ethernet/intel/e1000/e1000_main.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/e1000e/netdev.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/fm10k/fm10k_netdev.c", "fm10k_tx_timeout"], ["drivers/net/ethernet/intel/i40e/i40e_main.c", "i40e_tx_timeout"], ["drivers/net/ethernet/intel/iavf/iavf_main.c", "iavf_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/igb/igb_main.c", "igb_tx_timeout"], ["drivers/net/ethernet/intel/igbvf/netdev.c", "igbvf_tx_timeout"], ["drivers/net/ethernet/intel/ixgb/ixgb_main.c", "ixgb_tx_timeout"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c", "adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev);"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_main.c", "ixgbe_tx_timeout"], ["drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c", "ixgbevf_tx_timeout"], ["drivers/net/ethernet/jme.c", "jme_tx_timeout"], ["drivers/net/ethernet/korina.c", "korina_tx_timeout"], ["drivers/net/ethernet/lantiq_etop.c", "ltq_etop_tx_timeout"], ["drivers/net/ethernet/marvell/mv643xx_eth.c", "mv643xx_eth_tx_timeout"], ["drivers/net/ethernet/marvell/pxa168_eth.c", "pxa168_eth_tx_timeout"], ["drivers/net/ethernet/marvell/skge.c", "skge_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/mediatek/mtk_eth_soc.c", "mtk_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx5/core/en_main.c", "mlx5e_tx_timeout"], ["drivers/net/ethernet/micrel/ks8842.c", "ks8842_tx_timeout"], ["drivers/net/ethernet/micrel/ksz884x.c", "netdev_tx_timeout"], ["drivers/net/ethernet/microchip/enc28j60.c", "enc28j60_tx_timeout"], ["drivers/net/ethernet/microchip/encx24j600.c", "encx24j600_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.h", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/jazzsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/macsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/natsemi.c", "ns_tx_timeout"], ["drivers/net/ethernet/natsemi/ns83820.c", "ns83820_tx_timeout"], ["drivers/net/ethernet/natsemi/xtsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/neterion/s2io.h", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/s2io.c", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/vxge/vxge-main.c", "vxge_tx_watchdog"], ["drivers/net/ethernet/netronome/nfp/nfp_net_common.c", "nfp_net_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c", "pch_gbe_tx_timeout"], ["drivers/net/ethernet/packetengines/hamachi.c", "hamachi_tx_timeout"], ["drivers/net/ethernet/packetengines/yellowfin.c", "yellowfin_tx_timeout"], ["drivers/net/ethernet/pensando/ionic/ionic_lif.c", "ionic_tx_timeout"], ["drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c", "netxen_tx_timeout"], ["drivers/net/ethernet/qlogic/qla3xxx.c", "ql3xxx_tx_timeout"], ["drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c", "qlcnic_tx_timeout"], ["drivers/net/ethernet/qualcomm/emac/emac.c", "emac_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_spi.c", "qcaspi_netdev_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_uart.c", "qcauart_netdev_tx_timeout"], ["drivers/net/ethernet/rdc/r6040.c", "r6040_tx_timeout"], ["drivers/net/ethernet/realtek/8139cp.c", "cp_tx_timeout"], ["drivers/net/ethernet/realtek/8139too.c", "rtl8139_tx_timeout"], ["drivers/net/ethernet/realtek/atp.c", "tx_timeout"], ["drivers/net/ethernet/realtek/r8169_main.c", "rtl8169_tx_timeout"], ["drivers/net/ethernet/renesas/ravb_main.c", "ravb_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c", "sxgbe_tx_timeout"], ["drivers/net/ethernet/seeq/ether3.c", "ether3_timeout"], ["drivers/net/ethernet/seeq/sgiseeq.c", "timeout"], ["drivers/net/ethernet/sfc/efx.c", "efx_watchdog"], ["drivers/net/ethernet/sfc/falcon/efx.c", "ef4_watchdog"], ["drivers/net/ethernet/sgi/ioc3-eth.c", "ioc3_timeout"], ["drivers/net/ethernet/sgi/meth.c", "meth_tx_timeout"], ["drivers/net/ethernet/silan/sc92031.c", "sc92031_tx_timeout"], ["drivers/net/ethernet/sis/sis190.c", "sis190_tx_timeout"], ["drivers/net/ethernet/sis/sis900.c", "sis900_tx_timeout"], ["drivers/net/ethernet/smsc/epic100.c", "epic_tx_timeout"], ["drivers/net/ethernet/smsc/smc911x.c", "smc911x_timeout"], ["drivers/net/ethernet/smsc/smc9194.c", "smc_timeout"], ["drivers/net/ethernet/smsc/smc91c92_cs.c", "smc_tx_timeout"], ["drivers/net/ethernet/smsc/smc91x.c", "smc_timeout"], ["drivers/net/ethernet/stmicro/stmmac/stmmac_main.c", "stmmac_tx_timeout"], ["drivers/net/ethernet/sun/cassini.c", "cas_tx_timeout"], ["drivers/net/ethernet/sun/ldmvsw.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/niu.c", "niu_tx_timeout"], ["drivers/net/ethernet/sun/sunbmac.c", "bigmac_tx_timeout"], ["drivers/net/ethernet/sun/sungem.c", "gem_tx_timeout"], ["drivers/net/ethernet/sun/sunhme.c", "happy_meal_tx_timeout"], ["drivers/net/ethernet/sun/sunqe.c", "qe_tx_timeout"], ["drivers/net/ethernet/sun/sunvnet.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.h", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/synopsys/dwc-xlgmac-net.c", "xlgmac_tx_timeout"], ["drivers/net/ethernet/ti/cpmac.c", "cpmac_tx_timeout"], ["drivers/net/ethernet/ti/cpsw.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.h", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/davinci_emac.c", "emac_dev_tx_timeout"], ["drivers/net/ethernet/ti/netcp_core.c", "netcp_ndo_tx_timeout"], ["drivers/net/ethernet/ti/tlan.c", "tlan_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.h", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_wireless.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/spider_net.c", "spider_net_tx_timeout"], ["drivers/net/ethernet/toshiba/tc35815.c", "tc35815_tx_timeout"], ["drivers/net/ethernet/via/via-rhine.c", "rhine_tx_timeout"], ["drivers/net/ethernet/wiznet/w5100.c", "w5100_tx_timeout"], ["drivers/net/ethernet/wiznet/w5300.c", "w5300_tx_timeout"], ["drivers/net/ethernet/xilinx/xilinx_emaclite.c", "xemaclite_tx_timeout"], ["drivers/net/ethernet/xircom/xirc2ps_cs.c", "xirc_tx_timeout"], ["drivers/net/fjes/fjes_main.c", "fjes_tx_retry"], ["drivers/net/slip/slip.c", "sl_tx_timeout"], ["include/linux/usb/usbnet.h", "usbnet_tx_timeout"], ["drivers/net/usb/aqc111.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88172a.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88179_178a.c", "usbnet_tx_timeout"], ["drivers/net/usb/catc.c", "catc_tx_timeout"], ["drivers/net/usb/cdc_mbim.c", "usbnet_tx_timeout"], ["drivers/net/usb/cdc_ncm.c", "usbnet_tx_timeout"], ["drivers/net/usb/dm9601.c", "usbnet_tx_timeout"], ["drivers/net/usb/hso.c", "hso_net_tx_timeout"], ["drivers/net/usb/int51x1.c", "usbnet_tx_timeout"], ["drivers/net/usb/ipheth.c", "ipheth_tx_timeout"], ["drivers/net/usb/kaweth.c", "kaweth_tx_timeout"], ["drivers/net/usb/lan78xx.c", "lan78xx_tx_timeout"], ["drivers/net/usb/mcs7830.c", "usbnet_tx_timeout"], ["drivers/net/usb/pegasus.c", "pegasus_tx_timeout"], ["drivers/net/usb/qmi_wwan.c", "usbnet_tx_timeout"], ["drivers/net/usb/r8152.c", "rtl8152_tx_timeout"], ["drivers/net/usb/rndis_host.c", "usbnet_tx_timeout"], ["drivers/net/usb/rtl8150.c", "rtl8150_tx_timeout"], ["drivers/net/usb/sierra_net.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc75xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc95xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9700.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9800.c", "usbnet_tx_timeout"], ["drivers/net/usb/usbnet.c", "usbnet_tx_timeout"], ["drivers/net/vmxnet3/vmxnet3_drv.c", "vmxnet3_tx_timeout"], ["drivers/net/wan/cosa.c", "cosa_net_timeout"], ["drivers/net/wan/farsync.c", "fst_tx_timeout"], ["drivers/net/wan/fsl_ucc_hdlc.c", "uhdlc_tx_timeout"], ["drivers/net/wan/lmc/lmc_main.c", "lmc_driver_timeout"], ["drivers/net/wan/x25_asy.c", "x25_asy_timeout"], ["drivers/net/wimax/i2400m/netdev.c", "i2400m_tx_timeout"], ["drivers/net/wireless/intel/ipw2x00/ipw2100.c", "ipw2100_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/main.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco_usb.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco.h", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_dev.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.h", "islpci_eth_tx_timeout"], ["drivers/net/wireless/marvell/mwifiex/main.c", "mwifiex_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.c", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.h", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/rndis_wlan.c", "usbnet_tx_timeout"], ["drivers/net/wireless/wl3501_cs.c", "wl3501_tx_timeout"], ["drivers/net/wireless/zydas/zd1201.c", "zd1201_tx_timeout"], ["drivers/s390/net/qeth_core.h", "qeth_tx_timeout"], ["drivers/s390/net/qeth_core_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/staging/ks7010/ks_wlan_net.c", "ks_wlan_tx_timeout"], ["drivers/staging/qlge/qlge_main.c", "qlge_tx_timeout"], ["drivers/staging/rtl8192e/rtl8192e/rtl_core.c", "_rtl92e_tx_timeout"], ["drivers/staging/rtl8192u/r8192U_core.c", "tx_timeout"], ["drivers/staging/unisys/visornic/visornic_main.c", "visornic_xmit_timeout"], ["drivers/staging/wlan-ng/p80211netdev.c", "p80211knetdev_tx_timeout"], ["drivers/tty/n_gsm.c", "gsm_mux_net_tx_timeout"], ["drivers/tty/synclink.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclink_gt.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclinkmp.c", "hdlcdev_tx_timeout"], ["net/atm/lec.c", "lec_tx_timeout"], ["net/bluetooth/bnep/netdev.c", "bnep_net_timeout"] ); for my $p (@work) { my @pair = @$p; my $file = $pair[0]; my $func = $pair[1]; print STDERR $file , ": ", $func,"\n"; our @ARGV = ($file); while (<ARGV>) { if (m/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/) { print STDERR "found $1+$2 in $file\n"; } if (s/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/$1, unsigned int txqueue$2/) { print STDERR "$func found in $file\n"; } print; } } where the list of files and functions is simply from: git grep ndo_tx_timeout, with manual addition of headers in the rare cases where the function is from a header, then manually changing the few places which actually call ndo_tx_timeout. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Martin Habets <mhabets@solarflare.com> changes from v9: fixup a forward declaration changes from v9: more leftovers from v3 change changes from v8: fix up a missing direct call to timeout rebased on net-next changes from v7: fixup leftovers from v3 change changes from v6: fix typo in rtl driver changes from v5: add missing files (allow any net device argument name) changes from v4: add a missing driver header changes from v3: change queue # to unsigned Changes from v2: added headers Changes from v1: Fix errors found by kbuild: generalize the pattern a bit, to pick up a couple of instances missed by the previous version. Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2019-11-08 | net/sched: annotate lockless accesses to qdisc->empty | Eric Dumazet | 1 | -1/+1 | |
KCSAN reported the following race [1] BUG: KCSAN: data-race in __dev_queue_xmit / net_tx_action read to 0xffff8880ba403508 of 1 bytes by task 21814 on cpu 1: __dev_xmit_skb net/core/dev.c:3389 [inline] __dev_queue_xmit+0x9db/0x1b40 net/core/dev.c:3761 dev_queue_xmit+0x21/0x30 net/core/dev.c:3825 neigh_hh_output include/net/neighbour.h:500 [inline] neigh_output include/net/neighbour.h:509 [inline] ip6_finish_output2+0x873/0xec0 net/ipv6/ip6_output.c:116 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline] __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175 dst_output include/net/dst.h:436 [inline] ip6_local_out+0x74/0x90 net/ipv6/output_core.c:179 ip6_send_skb+0x53/0x110 net/ipv6/ip6_output.c:1795 udp_v6_send_skb.isra.0+0x3ec/0xa70 net/ipv6/udp.c:1173 udpv6_sendmsg+0x1906/0x1c20 net/ipv6/udp.c:1471 inet6_sendmsg+0x6d/0x90 net/ipv6/af_inet6.c:576 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0x9f/0xc0 net/socket.c:657 ___sys_sendmsg+0x2b7/0x5d0 net/socket.c:2311 __sys_sendmmsg+0x123/0x350 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg net/socket.c:2439 [inline] __x64_sys_sendmmsg+0x64/0x80 net/socket.c:2439 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 write to 0xffff8880ba403508 of 1 bytes by interrupt on cpu 0: qdisc_run_begin include/net/sch_generic.h:160 [inline] qdisc_run include/net/pkt_sched.h:120 [inline] net_tx_action+0x2b1/0x6c0 net/core/dev.c:4551 __do_softirq+0x115/0x33f kernel/softirq.c:292 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1082 do_softirq.part.0+0x6b/0x80 kernel/softirq.c:337 do_softirq kernel/softirq.c:329 [inline] __local_bh_enable_ip+0x76/0x80 kernel/softirq.c:189 local_bh_enable include/linux/bottom_half.h:32 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:688 [inline] ip6_finish_output2+0x7bb/0xec0 net/ipv6/ip6_output.c:117 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline] __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175 dst_output include/net/dst.h:436 [inline] ip6_local_out+0x74/0x90 net/ipv6/output_core.c:179 ip6_send_skb+0x53/0x110 net/ipv6/ip6_output.c:1795 udp_v6_send_skb.isra.0+0x3ec/0xa70 net/ipv6/udp.c:1173 udpv6_sendmsg+0x1906/0x1c20 net/ipv6/udp.c:1471 inet6_sendmsg+0x6d/0x90 net/ipv6/af_inet6.c:576 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0x9f/0xc0 net/socket.c:657 ___sys_sendmsg+0x2b7/0x5d0 net/socket.c:2311 __sys_sendmmsg+0x123/0x350 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg net/socket.c:2439 [inline] __x64_sys_sendmmsg+0x64/0x80 net/socket.c:2439 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 21817 Comm: syz-executor.2 Not tainted 5.4.0-rc6+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: d518d2ed8640 ("net/sched: fix race between deactivation and dequeue for NOLOCK qdisc") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2019-11-02 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net | David S. Miller | 1 | -11/+6 | |
The only slightly tricky merge conflict was the netdevsim because the mutex locking fix overlapped a lot of driver reload reorganization. The rest were (relatively) trivial in nature. Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2019-10-26 | net: sch_generic: Use pfifo_fast as fallback scheduler for CAN hardware | Vincent Prince | 1 | -0/+2 | |
There is networking hardware that isn't based on Ethernet for layers 1 and 2. For example CAN. CAN is a multi-master serial bus standard for connecting Electronic Control Units [ECUs] also known as nodes. A frame on the CAN bus carries up to 8 bytes of payload. Frame corruption is detected by a CRC. However frame loss due to corruption is possible, but a quite unusual phenomenon. While fq_codel works great for TCP/IP, it doesn't for CAN. There are a lot of legacy protocols on top of CAN, which are not build with flow control or high CAN frame drop rates in mind. When using fq_codel, as soon as the queue reaches a certain delay based length, skbs from the head of the queue are silently dropped. Silently meaning that the user space using a send() or similar syscall doesn't get an error. However TCP's flow control algorithm will detect dropped packages and adjust the bandwidth accordingly. When using fq_codel and sending raw frames over CAN, which is the common use case, the user space thinks the package has been sent without problems, because send() returned without an error. pfifo_fast will drop skbs, if the queue length exceeds the maximum. But with this scheduler the skbs at the tail are dropped, an error (-ENOBUFS) is propagated to user space. So that the user space can slow down the package generation. On distributions, where fq_codel is made default via CONFIG_DEFAULT_NET_SCH during compile time, or set default during runtime with sysctl net.core.default_qdisc (see [1]), we get a bad user experience. In my test case with pfifo_fast, I can transfer thousands of million CAN frames without a frame drop. On the other hand with fq_codel there is more then one lost CAN frame per thousand frames. As pointed out fq_codel is not suited for CAN hardware, so this patch changes attach_one_default_qdisc() to use pfifo_fast for "ARPHRD_CAN" network devices. During transition of a netdev from down to up state the default queuing discipline is attached by attach_default_qdiscs() with the help of attach_one_default_qdisc(). This patch modifies attach_one_default_qdisc() to attach the pfifo_fast (pfifo_fast_ops) if the network device type is "ARPHRD_CAN". [1] https://github.com/systemd/systemd/issues/9194 Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Vincent Prince <vincent.prince.fr@gmail.com> Acked-by: Dave Taht <dave.taht@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2019-10-26 | net: sch_generic: Use pfifo_fast as fallback scheduler for CAN hardware | Vincent Prince | 1 | -0/+2 | |
There is networking hardware that isn't based on Ethernet for layers 1 and 2. For example CAN. CAN is a multi-master serial bus standard for connecting Electronic Control Units [ECUs] also known as nodes. A frame on the CAN bus carries up to 8 bytes of payload. Frame corruption is detected by a CRC. However frame loss due to corruption is possible, but a quite unusual phenomenon. While fq_codel works great for TCP/IP, it doesn't for CAN. There are a lot of legacy protocols on top of CAN, which are not build with flow control or high CAN frame drop rates in mind. When using fq_codel, as soon as the queue reaches a certain delay based length, skbs from the head of the queue are silently dropped. Silently meaning that the user space using a send() or similar syscall doesn't get an error. However TCP's flow control algorithm will detect dropped packages and adjust the bandwidth accordingly. When using fq_codel and sending raw frames over CAN, which is the common use case, the user space thinks the package has been sent without problems, because send() returned without an error. pfifo_fast will drop skbs, if the queue length exceeds the maximum. But with this scheduler the skbs at the tail are dropped, an error (-ENOBUFS) is propagated to user space. So that the user space can slow down the package generation. On distributions, where fq_codel is made default via CONFIG_DEFAULT_NET_SCH during compile time, or set default during runtime with sysctl net.core.default_qdisc (see [1]), we get a bad user experience. In my test case with pfifo_fast, I can transfer thousands of million CAN frames without a frame drop. On the other hand with fq_codel there is more then one lost CAN frame per thousand frames. As pointed out fq_codel is not suited for CAN hardware, so this patch changes attach_one_default_qdisc() to use pfifo_fast for "ARPHRD_CAN" network devices. During transition of a netdev from down to up state the default queuing discipline is attached by attach_default_qdiscs() with the help of attach_one_default_qdisc(). This patch modifies attach_one_default_qdisc() to attach the pfifo_fast (pfifo_fast_ops) if the network device type is "ARPHRD_CAN". [1] https://github.com/systemd/systemd/issues/9194 Signed-off-by: Vincent Prince <vincent.prince.fr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2019-10-25 | net: core: add generic lockdep keys | Taehee Yoo | 1 | -11/+6 | |
Some interface types could be nested. (VLAN, BONDING, TEAM, MACSEC, MACVLAN, IPVLAN, VIRT_WIFI, VXLAN, etc..) These interface types should set lockdep class because, without lockdep class key, lockdep always warn about unexisting circular locking. In the current code, these interfaces have their own lockdep class keys and these manage itself. So that there are so many duplicate code around the /driver/net and /net/. This patch adds new generic lockdep keys and some helper functions for it. This patch does below changes. a) Add lockdep class keys in struct net_device - qdisc_running, xmit, addr_list, qdisc_busylock - these keys are used as dynamic lockdep key. b) When net_device is being allocated, lockdep keys are registered. - alloc_netdev_mqs() c) When net_device is being free'd llockdep keys are unregistered. - free_netdev() d) Add generic lockdep key helper function - netdev_register_lockdep_key() - netdev_unregister_lockdep_key() - netdev_update_lockdep_key() e) Remove unnecessary generic lockdep macro and functions f) Remove unnecessary lockdep code of each interfaces. After this patch, each interface modules don't need to maintain their lockdep keys. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2019-10-17 | net: sched: Avoid using yield() in a busy waiting loop | Marc Kleine-Budde | 1 | -2/+7 | |
With threaded interrupts enabled, the interrupt thread runs as SCHED_RR with priority 50. If a user application with a higher priority preempts the interrupt thread and tries to shutdown the network interface then it will loop forever. The kernel will spin in the loop waiting for the device to become idle and the scheduler will never consider the interrupt thread because its priority is lower. Avoid the problem by sleeping for a jiffy giving other tasks, including the interrupt thread, a chance to run and make progress. In the original thread it has been suggested to use wait_event() and properly waiting for the state to occur. DaveM explained that this would require to add expensive checks in the fast paths of packet processing. Link: https://lkml.kernel.org/r/1393976987-23555-1-git-send-email-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> [bigeasy: Rewrite commit message, add comment, use schedule_timeout_uninterruptible()] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2019-10-03 | net_sched: remove need_resched() from qdisc_run() | Eric Dumazet | 1 | -6/+1 | |
The introduction of this schedule point was done in commit 2ba2506ca7ca ("[NET]: Add preemption point in qdisc_run") at a time the loop was not bounded. Then later in commit d5b8aa1d246f ("net_sched: fix dequeuer fairness") we added a limit on the number of packets. Now is the time to remove the schedule point, since the default limit of 64 packets matches the number of packets a typical NAPI poll can process in a row. This solves a latency problem for most TCP receivers under moderate load : 1) host receives a packet. NET_RX_SOFTIRQ is raised by NIC hard IRQ handler 2) __do_softirq() does its first loop, handling NET_RX_SOFTIRQ and calling the driver napi->loop() function 3) TCP stores the skb in socket receive queue: 4) TCP calls sk->sk_data_ready() and wakeups a user thread waiting for EPOLLIN (as a result, need_resched() might now be true) 5) TCP cooks an ACK and sends it. 6) qdisc_run() processes one packet from qdisc, and sees need_resched(), this raises NET_TX_SOFTIRQ (even if there are no more packets in the qdisc) Then we go back to the __do_softirq() in 2), and we see that new softirqs were raised. Since need_resched() is true, we end up waking ksoftirqd in this path : if (pending) { if (time_before(jiffies, end) && !need_resched() && --max_restart) goto restart; wakeup_softirqd(); } So we have many wakeups of ksoftirqd kernel threads, and more calls to qdisc_run() with associated lock overhead. Note that another way to solve the issue would be to change TCP to first send the ACK packet, then signal the EPOLLIN, but this changes P99 latencies, as sending the ACK packet can add a long delay. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2019-09-15 | net_sched: let qdisc_put() accept NULL pointer | Cong Wang | 1 | -0/+3 | |
When tcf_block_get() fails in sfb_init(), q->qdisc is still a NULL pointer which leads to a crash in sfb_destroy(). Similar for sch_dsmark. Instead of fixing each separately, Linus suggested to just accept NULL pointer in qdisc_put(), which would make callers easier. (For sch_dsmark, the bug probably exists long before commit 6529eaba33f0.) Fixes: 6529eaba33f0 ("net: sched: introduce tcf block infractructure") Reported-by: syzbot+d5870a903591faaca4ae@syzkaller.appspotmail.com Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2019-09-06 | net: sched: fix reordering issues | Eric Dumazet | 1 | -2/+7 | |
Whenever MQ is not used on a multiqueue device, we experience serious reordering problems. Bisection found the cited commit. The issue can be described this way : - A single qdisc hierarchy is shared by all transmit queues. (eg : tc qdisc replace dev eth0 root fq_codel) - When/if try_bulk_dequeue_skb_slow() dequeues a packet targetting a different transmit queue than the one used to build a packet train, we stop building the current list and save the 'bad' skb (P1) in a special queue. (bad_txq) - When dequeue_skb() calls qdisc_dequeue_skb_bad_txq() and finds this skb (P1), it checks if the associated transmit queues is still in frozen state. If the queue is still blocked (by BQL or NIC tx ring full), we leave the skb in bad_txq and return NULL. - dequeue_skb() calls q->dequeue() to get another packet (P2) The other packet can target the problematic queue (that we found in frozen state for the bad_txq packet), but another cpu just ran TX completion and made room in the txq that is now ready to accept new packets. - Packet P2 is sent while P1 is still held in bad_txq, P1 might be sent at next round. In practice P2 is the lead of a big packet train (P2,P3,P4 ...) filling the BQL budget and delaying P1 by many packets :/ To solve this problem, we have to block the dequeue process as long as the first packet in bad_txq can not be sent. Reordering issues disappear and no side effects have been seen. Fixes: a53851e2c321 ("net: sched: explicit locking in gso_cpu fallback") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: John Fastabend <john.fastabend@gmail.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2019-08-29 | net/sched: pfifo_fast: fix wrong dereference in pfifo_fast_enqueue | Davide Caratti | 1 | -2/+6 | |
Now that 'TCQ_F_CPUSTATS' bit can be cleared, depending on the value of 'TCQ_F_NOLOCK' bit in the parent qdisc, we can't assume anymore that per-cpu counters are there in the error path of skb_array_produce(). Otherwise, the following splat can be seen: Unable to handle kernel paging request at virtual address 0000600dea430008 Mem abort info: ESR = 0x96000005 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000005 CM = 0, WnR = 0 user pgtable: 64k pages, 48-bit VAs, pgdp = 000000007b97530e [0000600dea430008] pgd=0000000000000000, pud=0000000000000000 Internal error: Oops: 96000005 [#1] SMP [...] pstate: 10000005 (nzcV daif -PAN -UAO) pc : pfifo_fast_enqueue+0x524/0x6e8 lr : pfifo_fast_enqueue+0x46c/0x6e8 sp : ffff800d39376fe0 x29: ffff800d39376fe0 x28: 1ffff001a07d1e40 x27: ffff800d03e8f188 x26: ffff800d03e8f200 x25: 0000000000000062 x24: ffff800d393772f0 x23: 0000000000000000 x22: 0000000000000403 x21: ffff800cca569a00 x20: ffff800d03e8ee00 x19: ffff800cca569a10 x18: 00000000000000bf x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: ffff1001a726edd0 x13: 1fffe4000276a9a4 x12: 0000000000000000 x11: dfff200000000000 x10: ffff800d03e8f1a0 x9 : 0000000000000003 x8 : 0000000000000000 x7 : 00000000f1f1f1f1 x6 : ffff1001a726edea x5 : ffff800cca56a53c x4 : 1ffff001bf9a8003 x3 : 1ffff001bf9a8003 x2 : 1ffff001a07d1dcb x1 : 0000600dea430000 x0 : 0000600dea430008 Process ping (pid: 6067, stack limit = 0x00000000dc0aa557) Call trace: pfifo_fast_enqueue+0x524/0x6e8 htb_enqueue+0x660/0x10e0 [sch_htb] __dev_queue_xmit+0x123c/0x2de0 dev_queue_xmit+0x24/0x30 ip_finish_output2+0xc48/0x1720 ip_finish_output+0x548/0x9d8 ip_output+0x334/0x788 ip_local_out+0x90/0x138 ip_send_skb+0x44/0x1d0 ip_push_pending_frames+0x5c/0x78 raw_sendmsg+0xed8/0x28d0 inet_sendmsg+0xc4/0x5c0 sock_sendmsg+0xac/0x108 __sys_sendto+0x1ac/0x2a0 __arm64_sys_sendto+0xc4/0x138 el0_svc_handler+0x13c/0x298 el0_svc+0x8/0xc Code: f9402e80 d538d081 91002000 8b010000 (885f7c03) Fix this by testing the value of 'TCQ_F_CPUSTATS' bit in 'qdisc->flags', before dereferencing 'qdisc->cpu_qstats'. Fixes: 8a53e616de29 ("net: sched: when clearing NOLOCK, clear TCQ_F_CPUSTATS, too") CC: Paolo Abeni <pabeni@redhat.com> CC: Stefano Brivio <sbrivio@redhat.com> Reported-by: Li Shuang <shuali@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2019-08-29 | net/sched: pfifo_fast: fix wrong dereference when qdisc is reset | Davide Caratti | 1 | -4/+7 | |
Now that 'TCQ_F_CPUSTATS' bit can be cleared, depending on the value of 'TCQ_F_NOLOCK' bit in the parent qdisc, we need to be sure that per-cpu counters are present when 'reset()' is called for pfifo_fast qdiscs. Otherwise, the following script: # tc q a dev lo handle 1: root htb default 100 # tc c a dev lo parent 1: classid 1:100 htb \ > rate 95Mbit ceil 100Mbit burst 64k [...] # tc f a dev lo parent 1: protocol arp basic classid 1:100 [...] # tc q a dev lo parent 1:100 handle 100: pfifo_fast [...] # tc q d dev lo root can generate the following splat: Unable to handle kernel paging request at virtual address dfff2c01bd148000 Mem abort info: ESR = 0x96000004 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [dfff2c01bd148000] address between user and kernel address ranges Internal error: Oops: 96000004 [#1] SMP [...] pstate: 80000005 (Nzcv daif -PAN -UAO) pc : pfifo_fast_reset+0x280/0x4d8 lr : pfifo_fast_reset+0x21c/0x4d8 sp : ffff800d09676fa0 x29: ffff800d09676fa0 x28: ffff200012ee22e4 x27: dfff200000000000 x26: 0000000000000000 x25: ffff800ca0799958 x24: ffff1001940f332b x23: 0000000000000007 x22: ffff200012ee1ab8 x21: 0000600de8a40000 x20: 0000000000000000 x19: ffff800ca0799900 x18: 0000000000000000 x17: 0000000000000002 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: ffff1001b922e6e2 x11: 1ffff001b922e6e1 x10: 0000000000000000 x9 : 1ffff001b922e6e1 x8 : dfff200000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 1fffe400025dc45c x4 : 1fffe400025dc357 x3 : 00000c01bd148000 x2 : 0000600de8a40000 x1 : 0000000000000007 x0 : 0000600de8a40004 Call trace: pfifo_fast_reset+0x280/0x4d8 qdisc_reset+0x6c/0x370 htb_reset+0x150/0x3b8 [sch_htb] qdisc_reset+0x6c/0x370 dev_deactivate_queue.constprop.5+0xe0/0x1a8 dev_deactivate_many+0xd8/0x908 dev_deactivate+0xe4/0x190 qdisc_graft+0x88c/0xbd0 tc_get_qdisc+0x418/0x8a8 rtnetlink_rcv_msg+0x3a8/0xa78 netlink_rcv_skb+0x18c/0x328 rtnetlink_rcv+0x28/0x38 netlink_unicast+0x3c4/0x538 netlink_sendmsg+0x538/0x9a0 sock_sendmsg+0xac/0xf8 ___sys_sendmsg+0x53c/0x658 __sys_sendmsg+0xc8/0x140 __arm64_sys_sendmsg+0x74/0xa8 el0_svc_handler+0x164/0x468 el0_svc+0x10/0x14 Code: 910012a0 92400801 d343fc03 11000c21 (38fb6863) Fix this by testing the value of 'TCQ_F_CPUSTATS' bit in 'qdisc->flags', before dereferencing 'qdisc->cpu_qstats'. Changes since v1: - coding style improvements, thanks to Stefano Brivio Fixes: 8a53e616de29 ("net: sched: when clearing NOLOCK, clear TCQ_F_CPUSTATS, too") CC: Paolo Abeni <pabeni@redhat.com> Reported-by: Li Shuang <shuali@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2019-05-30 | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 | Thomas Gleixner | 1 | -5/+1 | |
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | |||||
2019-05-04 | net: add a generic tracepoint for TX queue timeout | Cong Wang | 1 | -0/+2 | |
Although devlink health report does a nice job on reporting TX timeout and other NIC errors, unfortunately it requires drivers to support it but currently only mlx5 has implemented it. Before other drivers could catch up, it is useful to have a generic tracepoint to monitor this kind of TX timeout. We have been suffering TX timeout with different drivers, we plan to start to monitor it with rasdaemon which just needs a new tracepoint. Sample output: ksoftirqd/1-16 [001] ..s2 144.043173: net_dev_xmit_timeout: dev=ens3 driver=e1000 queue=0 Cc: Eran Ben Elisha <eranbe@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2019-04-10 | Revert: "net: sched: put back q.qlen into a single location" | Paolo Abeni | 1 | -4/+5 | |
This revert commit 46b1c18f9deb ("net: sched: put back q.qlen into a single location"). After the previous patch, when a NOLOCK qdisc is enslaved to a locking qdisc it switches to global stats accounting. As a consequence, when a classful qdisc accesses directly a child qdisc's qlen, such qdisc is not doing per CPU accounting and qlen value is consistent. In the control path nobody uses directly qlen since commit e5f0e8f8e45 ("net: sched: introduce and use qdisc tree flush/purge helpers"), so we can remove the contented atomic ops from the datapath. v1 -> v2: - complete the qdisc_qstats_atomic_qlen_dec() -> qdisc_qstats_cpu_qlen_dec() replacement, fix build issue - more descriptive commit message Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2019-04-10 | net: sched: when clearing NOLOCK, clear TCQ_F_CPUSTATS, too | Paolo Abeni | 1 | -8/+2 | |
Since stats updating is always consistent with TCQ_F_CPUSTATS flag, we can disable it at qdisc creation time flipping such bit. In my experiments, if the NOLOCK flag is cleared, per CPU stats accounting does not give any measurable performance gain, but it waste some memory. Let's clear TCQ_F_CPUSTATS together with NOLOCK, when enslaving a NOLOCK qdisc to 'lock' one. Use stats update helper inside pfifo_fast, to cope correctly with TCQ_F_CPUSTATS flag change. As a side effect, q.qlen value for any child qdiscs is always consistent for all lock classfull qdiscs. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2019-04-10 | net: sched: always do stats accounting according to TCQ_F_CPUSTATS | Paolo Abeni | 1 | -33/+17 | |
The core sched implementation checks independently for NOLOCK flag to acquire/release the root spin lock and for qdisc_is_percpu_stats() to account per CPU values in many places. This change update the last few places checking the TCQ_F_NOLOCK to do per CPU stats accounting according to qdisc_is_percpu_stats() value. The above allows to clean dev_requeue_skb() implementation a bit and makes stats update always consistent with a single flag. v1 -> v2: - do not move qdisc_is_empty definition, fix build issue Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2019-03-24 | net: sched: add empty status flag for NOLOCK qdisc | Paolo Abeni | 1 | -0/+3 | |
The queue is marked not empty after acquiring the seqlock, and it's up to the NOLOCK qdisc clearing such flag on dequeue. Since the empty status lays on the same cache-line of the seqlock, it's always hot on cache during the updates. This makes the empty flag update a little bit loosy. Given the lack of synchronization between enqueue and dequeue, this is unavoidable. v2 -> v3: - qdisc_is_empty() has a const argument (Eric) v1 -> v2: - use really an 'empty' flag instead of 'not_empty', as suggested by Eric Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2019-03-05 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net | David S. Miller | 1 | -7/+6 | |
2019-03-03 | net: sched: put back q.qlen into a single location | Eric Dumazet | 1 | -7/+6 | |
In the series fc8b81a5981f ("Merge branch 'lockless-qdisc-series'") John made the assumption that the data path had no need to read the qdisc qlen (number of packets in the qdisc). It is true when pfifo_fast is used as the root qdisc, or as direct MQ/MQPRIO children. But pfifo_fast can be used as leaf in class full qdiscs, and existing logic needs to access the child qlen in an efficient way. HTB breaks badly, since it uses cl->leaf.q->q.qlen in : htb_activate() -> WARN_ON() htb_dequeue_tree() to decide if a class can be htb_deactivated when it has no more packets. HFSC, DRR, CBQ, QFQ have similar issues, and some calls to qdisc_tree_reduce_backlog() also read q.qlen directly. Using qdisc_qlen_sum() (which iterates over all possible cpus) in the data path is a non starter. It seems we have to put back qlen in a central location, at least for stable kernels. For all qdisc but pfifo_fast, qlen is guarded by the qdisc lock, so the existing q.qlen{++|--} are correct. For 'lockless' qdisc (pfifo_fast so far), we need to use atomic_{inc|dec}() because the spinlock might be not held (for example from pfifo_fast_enqueue() and pfifo_fast_dequeue()) This patch adds atomic_qlen (in the same location than qlen) and renames the following helpers, since we want to express they can be used without qdisc lock, and that qlen is no longer percpu. - qdisc_qstats_cpu_qlen_dec -> qdisc_qstats_atomic_qlen_dec() - qdisc_qstats_cpu_qlen_inc -> qdisc_qstats_atomic_qlen_inc() Later (net-next) we might revert this patch by tracking all these qlen uses and replace them by a more efficient method (not having to access a precise qlen, but an empty/non_empty status that might be less expensive to maintain/track). Another possibility is to have a legacy pfifo_fast version that would be used when used a a child qdisc, since the parent qdisc needs a spinlock anyway. But then, future lockless qdiscs would also have the same problem. Fixes: 7e66016f2c65 ("net: sched: helpers to sum qlen and qlen for per cpu logic") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2019-02-27 | net: Use RCU_POINTER_INITIALIZER() to init static variable | Li RongQing | 1 | -1/+1 | |
This pointer is RCU protected, so proper primitives should be used. Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2019-02-15 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net | David S. Miller | 1 | -1/+1 | |
The netfilter conflicts were rather simple overlapping changes. However, the cls_tcindex.c stuff was a bit more complex. On the 'net' side, Cong is fixing several races and memory leaks. Whilst on the 'net-next' side we have Vlad adding the rtnl-ness support. What I've decided to do, in order to resolve this, is revert the conversion over to using a workqueue that Cong did, bringing us back to pure RCU. I did it this way because I believe that either Cong's races don't apply with have Vlad did things, or Cong will have to implement the race fix slightly differently. Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2019-02-12 | net: sched: protect filter_chain list with filter_chain_lock mutex | Vlad Buslov | 1 | -1/+5 | |
Extend tcf_chain with new filter_chain_lock mutex. Always lock the chain when accessing filter_chain list, instead of relying on rtnl lock. Dereference filter_chain with tcf_chain_dereference() lockdep macro to verify that all users of chain_list have the lock taken. Rearrange tp insert/remove code in tc_new_tfilter/tc_del_tfilter to execute all necessary code while holding chain lock in order to prevent invalidation of chain_info structure by potential concurrent change. This also serializes calls to tcf_chain0_head_change(), which allows head change callbacks to rely on filter_chain_lock for synchronization instead of rtnl mutex. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2019-02-11 | Documentation: bring operstate documentation up-to-date | Jouke Witteveen | 1 | -1/+1 | |
Netlink has moved from bitmasks to group numbers long ago. Signed-off-by: Jouke Witteveen <j.witteveen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2018-12-01 | net/sched: Replace call_rcu_bh() and rcu_barrier_bh() | Paul E. McKenney | 1 | -4/+4 | |
Now that call_rcu()'s callback is not invoked until after bh-disable regions of code have completed (in addition to explicitly marked RCU read-side critical sections), call_rcu() can be used in place of call_rcu_bh(). Similarly, rcu_barrier() can be used in place o frcu_barrier_bh(). This commit therefore makes these changes. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: "David S. Miller" <davem@davemloft.net> Cc: <netdev@vger.kernel.org> | |||||
2018-10-11 | net: sched: avoid writing on noop_qdisc | Eric Dumazet | 1 | -2/+12 | |
While noop_qdisc.gso_skb and noop_qdisc.skb_bad_txq are not used in other places, it seems not correct to overwrite their fields in dev_init_scheduler_queue(). noop_qdisc is essentially a shared and read-only object, even if it is not marked as const because of some implementation detail. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2018-09-28 | net: sched: make function qdisc_free_cb() static | Wei Yongjun | 1 | -1/+1 | |
Fixes the following sparse warning: net/sched/sch_generic.c:944:6: warning: symbol 'qdisc_free_cb' was not declared. Should it be static? Fixes: 3a7d0d07a386 ("net: sched: extend Qdisc with rcu") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2018-09-26 | net: sched: extend Qdisc with rcu | Vlad Buslov | 1 | -1/+24 | |
Currently, Qdisc API functions assume that users have rtnl lock taken. To implement rtnl unlocked classifiers update interface, Qdisc API must be extended with functions that do not require rtnl lock. Extend Qdisc structure with rcu. Implement special version of put function qdisc_put_unlocked() that is called without rtnl lock taken. This function only takes rtnl lock if Qdisc reference counter reached zero and is intended to be used as optimization. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2018-09-26 | net: sched: rename qdisc_destroy() to qdisc_put() | Vlad Buslov | 1 | -9/+14 | |
Current implementation of qdisc_destroy() decrements Qdisc reference counter and only actually destroy Qdisc if reference counter value reached zero. Rename qdisc_destroy() to qdisc_put() in order for it to better describe the way in which this function currently implemented and used. Extract code that deallocates Qdisc into new private qdisc_destroy() function. It is intended to be shared between regular qdisc_put() and its unlocked version that is introduced in next patch in this series. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2018-09-10 | net: Add and use skb_mark_not_on_list(). | David S. Miller | 1 | -2/+2 | |
An SKB is not on a list if skb->next is NULL. Codify this convention into a helper function and use it where we are dequeueing an SKB and need to mark it as such. Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2018-05-31 | net: remove bypassed check in sch_direct_xmit() | Song Liu | 1 | -3/+0 | |
Checking netif_xmit_frozen_or_stopped() at the end of sch_direct_xmit() is being bypassed. This is because "ret" from sch_direct_xmit() will be either NETDEV_TX_OK or NETDEV_TX_BUSY, and only ret == NETDEV_TX_OK == 0 will reach the condition: if (ret && netif_xmit_frozen_or_stopped(txq)) return false; This patch cleans up the code by removing the whole condition. For more discussion about this, please refer to https://marc.info/?t=152727195700008 Signed-off-by: Song Liu <songliubraving@fb.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2018-05-17 | pfifo_fast: drop unneeded additional lock on dequeue | Paolo Abeni | 1 | -2/+2 | |
After the previous patch, for NOLOCK qdiscs, q->seqlock is always held when the dequeue() is invoked, we can drop any additional locking to protect such operation. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> |