summaryrefslogtreecommitdiff
path: root/net/sctp/outqueue.c
AgeCommit message (Collapse)AuthorFilesLines
2012-07-22sctp: Implement quick failover draft from tsvwgNeil Horman1-2/+4
I've seen several attempts recently made to do quick failover of sctp transports by reducing various retransmit timers and counters. While its possible to implement a faster failover on multihomed sctp associations, its not particularly robust, in that it can lead to unneeded retransmits, as well as false connection failures due to intermittent latency on a network. Instead, lets implement the new ietf quick failover draft found here: http://tools.ietf.org/html/draft-nishida-tsvwg-sctp-failover-05 This will let the sctp stack identify transports that have had a small number of errors, and avoid using them quickly until their reliability can be re-established. I've tested this out on two virt guests connected via multiple isolated virt networks and believe its in compliance with the above draft and works well. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Vlad Yasevich <vyasevich@gmail.com> CC: Sridhar Samudrala <sri@us.ibm.com> CC: "David S. Miller" <davem@davemloft.net> CC: linux-sctp@vger.kernel.org CC: joe@perches.com Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15net: cleanup unsigned to unsigned intEric Dumazet1-1/+1
Use of "unsigned int" is preferred to bare "unsigned" in net tree. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-20sctp: Do not account for sizeof(struct sk_buff) in estimated rwndThomas Graf1-4/+2
When checking whether a DATA chunk fits into the estimated rwnd a full sizeof(struct sk_buff) is added to the needed chunk size. This quickly exhausts the available rwnd space and leads to packets being sent which are much below the PMTU limit. This can lead to much worse performance. The reason for this behaviour was to avoid putting too much memory pressure on the receiver. The concept is not completely irational because a Linux receiver does in fact clone an skb for each DATA chunk delivered. However, Linux also reserves half the available socket buffer space for data structures therefore usage of it is already accounted for. When proposing to change this the last time it was noted that this behaviour was introduced to solve a performance issue caused by rwnd overusage in combination with small DATA chunks. Trying to reproduce this I found that with the sk_buff overhead removed, the performance would improve significantly unless socket buffer limits are increased. The following numbers have been gathered using a patched iperf supporting SCTP over a live 1 Gbit ethernet network. The -l option was used to limit DATA chunk sizes. The numbers listed are based on the average of 3 test runs each. Default values have been used for sk_(r|w)mem. Chunk Size Unpatched No Overhead ------------------------------------- 4 15.2 Kbit [!] 12.2 Mbit [!] 8 35.8 Kbit [!] 26.0 Mbit [!] 16 95.5 Kbit [!] 54.4 Mbit [!] 32 106.7 Mbit 102.3 Mbit 64 189.2 Mbit 188.3 Mbit 128 331.2 Mbit 334.8 Mbit 256 537.7 Mbit 536.0 Mbit 512 766.9 Mbit 766.6 Mbit 1024 810.1 Mbit 808.6 Mbit Signed-off-by: Thomas Graf <tgraf@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-25sctp: HEARTBEAT negotiation after ASCONFMichio Honda1-0/+4
This patch fixes BUG that the ASCONF receiver transmits DATA chunks to the newly added UNCONFIRMED destination. Signed-off-by: Michio Honda <micchie@sfc.wide.ad.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14Merge branch 'master' of ↵David S. Miller1-1/+19
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/bluetooth/l2cap_core.c
2011-07-08sctp: Enforce retransmission limit during shutdownThomas Graf1-1/+19
When initiating a graceful shutdown while having data chunks on the retransmission queue with a peer which is in zero window mode the shutdown is never completed because the retransmission error count is reset periodically by the following two rules: - Do not timeout association while doing zero window probe. - Reset overall error count when a heartbeat request has been acknowledged. The graceful shutdown will wait for all outstanding TSN to be acknowledged before sending the SHUTDOWN request. This never happens due to the peer's zero window not acknowledging the continuously retransmitted data chunks. Although the error counter is incremented for each failed retransmission, the receiving of the SACK announcing the zero window clears the error count again immediately. Also heartbeat requests continue to be sent periodically. The peer acknowledges these requests causing the error counter to be reset as well. This patch changes behaviour to only reset the overall error counter for the above rules while not in shutdown. After reaching the maximum number of retransmission attempts, the T5 shutdown guard timer is scheduled to give the receiver some additional time to recover. The timer is stopped as soon as the receiver acknowledges any data. The issue can be easily reproduced by establishing a sctp association over the loopback device, constantly queueing data at the sender while not reading any at the receiver. Wait for the window to reach zero, then initiate a shutdown by killing both processes simultaneously. The association will never be freed and the chunks on the retransmission queue will be retransmitted indefinitely. Signed-off-by: Thomas Graf <tgraf@infradead.org> Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-02sctp: Add ASCONF operation on the single-homed hostMichio Honda1-0/+13
In this case, the SCTP association transmits an ASCONF packet including addition of the new IP address and deletion of the old address. This patch implements this functionality. In this case, the ASCONF chunk is added to the beginning of the queue, because the other chunks cannot be transmitted in this state. Signed-off-by: Michio Honda <micchie@sfc.wide.ad.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sctp: move chunk from retransmit queue to abandoned listWei Yongjun1-0/+7
If there is still data waiting to retransmit and remain in retransmit queue, while doing the next retransmit, if the chunk is abandoned, we should move it to abandoned list. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sctp: remove completely unsed EMPTY stateVlad Yasevich1-1/+0
SCTP does not SCTP_STATE_EMPTY and we can never be in that state. Remove useless code. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sctp: teach CACC algorithm about removed transportsVlad Yasevich1-3/+8
When we have have to remove a transport due to ASCONF, we move the data to a new active path. This can trigger CACC algorithm to not mark that data as missing when SACKs arrive. This is because the transport passed to the CACC algorithm is the one this data is sitting on, not the one it was sent on (that one may be gone). So, by sending the original transport (even if it's NULL), we may start marking data as missing. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-31Fix common misspellingsLucas De Marchi1-3/+3
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-08sctp: several declared/set but unused fixesHagen Paul Pfeifer1-2/+0
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-27net/sctp: Use pr_fmt and pr_<level>Joe Perches1-16/+18
Change SCTP_DEBUG_PRINTK and SCTP_DEBUG_PRINTK_IPADDR to use do { print } while (0) guards. Add SCTP_DEBUG_PRINTK_CONT to fix errors in log when lines were continued. Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Add a missing newline in "Failed bind hash alloc" Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18net: Remove unnecessary returns from void function()sJoe Perches1-2/+0
This patch removes from net/ (but not any netfilter files) all the unnecessary return; statements that precede the last closing brace of void functions. It does not remove the returns that are immediately preceded by a label as gcc doesn't like that. Done via: $ grep -rP --include=*.[ch] -l "return;\n}" net/ | \ xargs perl -i -e 'local $/ ; while (<>) { s/\n[ \t\n]+return;\n}/\n}/g; print; }' Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-01sctp: Optimize computation of highest new tsn in SACK.Vlad Yasevich1-35/+7
Right now, if the highest tsn in the SACK doesn't change, we'll end up scanning the transmitted lists on the transports twice: once for locating the highest _new_ tsn, and once for actually tagging chunks as acked. This is a waste, since we can record the highest _new_ tsn at the same time as tagging chunks. Long ago this was not possible because we would try to mark chunks as missing at the same time as tagging them acked and this approach didn't work. Now that the two steps are separate, we can re-use the old approach. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2010-05-01sctp: correctly mark missing chunks in fast recoveryVlad Yasevich1-5/+13
According to RFC 4960 Section 7.2.4: If an endpoint is in Fast Recovery and a SACK arrives that advances the Cumulative TSN Ack Point, the miss indications are incremented for all TSNs reported missing in the SACK. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2010-05-01sctp: Do not force T3 timer on fast retransmissions.Vlad Yasevich1-12/+3
We don't need to force the T3 timer any more and it's actually wrong to do as it causes too long of a delay. The timer will be started if one is not running, but if one is running, we leave it alone. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2010-05-01sctp: remove 'resent' bit from the chunkVlad Yasevich1-1/+0
The 'resent' bit is used to make sure that we don't update rto estimate based on retransmitted chunks. However, we already have the 'rto_pending' bit that we test when need to update rto, so 'resent' bit is just extra. Additionally, we currently have a bug in that we always set a 'resent' bit and thus rto estimate is only updated by Heartbeats. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2010-05-01sctp: use sctp_chunk_is_data macro to decide a chunk is data chunkShan Wei1-1/+1
sctp_chunk_is_data macro is defined to decide that whether a chunk is data chunk or not. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2010-05-01sctp: fix to retranmit at least one DATA chunkWei Yongjun1-0/+12
While doing retranmit, if control chunk exists, such as FORWARD TSN chunk, and the DATA chunk can not be bundled with this control chunk because of PMTU limit, no DATA chunk will be retranmitted in the current implementation. This patch makes sure to retranmit at least one DATA chunk in this case. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2010-05-01sctp: assure at least one T3-rtx timer is running if a FORWARD TSN is sentWei Yongjun1-0/+6
PR-SCTP extension section 3.5 Sender Side Implementation of PR-SCTP: C5) If a FORWARD TSN is sent, the sender MUST assure that at least one T3-rtx timer is running. So this patch fix to assure at least one T3-rtx timer is running if a FORWARD TSN is or will to sent. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-11-30net: Move && and || to end of previous lineJoe Perches1-2/+2
Not including net/atm/ Compiled tested x86 allyesconfig only Added a > 80 column line or two, which I ignored. Existing checkpatch plaints willfully, cheerfully ignored. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29Merge branch 'master' of ↵David S. Miller1-10/+0
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/ieee802154/fakehard.c drivers/net/e1000e/ich8lan.c drivers/net/e1000e/phy.c drivers/net/netxen/netxen_nic_init.c drivers/net/wireless/ath/ath9k/main.c
2009-11-29sctp: on T3_RTX retransmit all the in-flight chunksAndrei Pelinescu-Onciul1-10/+0
When retransmitting due to T3 timeout, retransmit all the in-flight chunks for the corresponding transport/path, including chunks sent less then 1 rto ago. This is the correct behaviour according to rfc4960 section 6.3.3 E3 and "Note: Any DATA chunks that were sent to the address for which the T3-rtx timer expired but did not fit in one MTU (rule E3 above) should be marked for retransmission and sent as soon as cwnd allows (normally, when a SACK arrives). ". This fixes problems when more then one path is present and the T3 retransmission of the first chunk that timeouts stops the T3 timer for the initial active path, leaving all the other in-flight chunks waiting forever or until a new chunk is transmitted on the same path and timeouts (and this will happen only if the cwnd allows sending new chunks, but since cwnd was dropped to MTU by the timeout => it will wait until the first heartbeat). Example: 10 packets in flight, sent at 0.1 s intervals on the primary path. The primary path is down and the first packet timeouts. The first packet is retransmitted on another path, the T3 timer for the primary path is stopped and cwnd is set to MTU. All the other 9 in-flight packets will not be retransmitted (unless more new packets are sent on the primary path which depend on cwnd allowing it, and even in this case the 9 packets will be retransmitted only after a new packet timeouts which even in the best case would be more then RTO). This commit reverts d0ce92910bc04e107b2f3f2048f07e94f570035d and also removes the now unused transport->last_rto, introduced in b6157d8e03e1e780660a328f7183bcbfa4a93a19. p.s The problem is not only when multiple paths are there. It can happen in a single homed environment. If the application stops sending data, it possible to have a hung association. Signed-off-by: Andrei Pelinescu-Onciul <andrei@iptel.org> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23sctp: Update max.burst implementationVlad Yasevich1-0/+15
Current implementation of max.burst ends up limiting new data during cwnd decay period. The decay is happening becuase the connection is idle and we are allowed to fill the congestion window. The point of max.burst is to limit micro-bursts in response to large acks. This still happens, as max.burst is still applied to each transmit opportunity. It will also apply if a very large send is made (greater then allowed by burst). Tested-by: Florian Niederbacher <florian.niederbacher@student.uibk.ac.at> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-11-23sctp: implement the sender side for SACK-IMMEDIATELY extensionWei Yongjun1-0/+7
This patch implement the sender side for SACK-IMMEDIATELY extension. Section 4.1. Sender Side Considerations Whenever the sender of a DATA chunk can benefit from the corresponding SACK chunk being sent back without delay, the sender MAY set the I-bit in the DATA chunk header. Reasons for setting the I-bit include o The sender is in the SHUTDOWN-PENDING state. o The application requests to set the I-bit of the last DATA chunk of a user message when providing the user message to the SCTP implementation. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-09-05sctp: Failover transmitted list on transport deleteVlad Yasevich1-13/+34
Add-IP feature allows users to delete an active transport. If that transport has chunks in flight, those chunks need to be moved to another transport or association may get into unrecoverable state. Reported-by: Rafael Laufer <rlaufer@cisco.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-03-13sctp: fix to send FORWARD-TSN chunk only if peer has such capableWei Yongjun1-0/+3
RFC3758 Section 3.3.1. Sending Forward-TSN-Supported param in INIT Note that if the endpoint chooses NOT to include the parameter, then at no time during the life of the association can it send or process a FORWARD TSN. If peer does not support PR-SCTP capable, don't send FORWARD-TSN chunk to peer. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03sctp: use time_before or time_after for comparing jiffiesWei Yongjun1-1/+2
The functions time_before or time_after are more robust for comparing jiffies against other values. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-23sctp: Correctly start rtx timer on new packet transmissions.Vlad Yasevich1-2/+1
Commit 62aeaff5ccd96462b7077046357a6d7886175a57 (sctp: Start T3-RTX timer when fast retransmitting lowest TSN) introduced a regression where it was possible to forcibly restart the sctp retransmit timer at the transmission of any new chunk. This resulted in much longer timeout times and sometimes hung sctp connections. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-01sctp: reduce memory footprint of sctp_chunk structureNeil Horman1-7/+7
sctp_chunks should be put on a diet. This is some of the low hanging fruit that we can strip out. Changes all the __s8/__u8 flags to bitfields. Saves 12 bytes per chunk. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2008-10-01sctp: Retransmit list is ineligable for missing indicationsVlad Yasevich1-2/+0
Chunks placed on the retransmit list are marked as inelegible for fast retrasnmission. Since missing indications determine when fast reransmission is done, there is not point in calling sctp_mark_missing() on the retransmit list since those chunks will not be marked. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2008-10-01sctp: Optimize SFR-CACC transport list walking during SACK processingVlad Yasevich1-15/+19
There is a possibility of walking the transport list twice during SACK processing when doing SFR-CACC algorithm. We can restructure the code to only do this once. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2008-10-01sctp: Only mark chunks as missing when there are gapsVlad Yasevich1-9/+12
Frist small step in optimizing SACK processing. Do not call sctp_mark_missing() when there are no gaps reported and thus not missing chunks. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2008-07-23sctp: make sctp_outq_flush() staticAdrian Bunk1-1/+3
sctp_outq_flush() can now become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-20sctp: Follow security requirement of responding with 1 packetVlad Yasevich1-10/+24
RFC 4960, Section 11.4. Protection of Non-SCTP-Capable Hosts When an SCTP stack receives a packet containing multiple control or DATA chunks and the processing of the packet requires the sending of multiple chunks in response, the sender of the response chunk(s) MUST NOT send more than one packet. If bundling is supported, multiple response chunks that fit into a single packet MAY be bundled together into one single response packet. If bundling is not supported, then the sender MUST NOT send more than one response chunk and MUST discard all other responses. Note that this rule does NOT apply to a SACK chunk, since a SACK chunk is, in itself, a response to DATA and a SACK does not require a response of more DATA. We implement this by not servicing our outqueue until we reach the end of the packet. This enables maximum bundling. We also identify 'response' chunks and make sure that we only send 1 packet when sending such chunks. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-04sctp: Flush the queue only once during fast retransmit.Vlad Yasevich1-34/+48
When fast retransmit is triggered by a sack, we should flush the queue only once so that only 1 retransmit happens. Also, since we could potentially have non-fast-rtx chunks on the retransmit queue, we need make sure any chunks eligable for fast retransmit are sent first during fast retransmission. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Tested-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-04sctp: Start T3-RTX timer when fast retransmitting lowest TSNVlad Yasevich1-11/+31
When we are trying to fast retransmit the lowest outstanding TSN, we need to restart the T3-RTX timer, so that subsequent timeouts will correctly tag all the packets necessary for retransmissions. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Tested-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-18SCTP: Initialize partial_bytes_acked to 0, when all of the data is acked.Gui Jianfeng1-0/+2
According to RFC4960 7.2.2, When all of the data transmitted by the sender has been acknowledged by the recerver, partial_bytes_acked is initialized to 0. This patch conforms to rfc requirement. Without this fix, cwnd might be error incremented. Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com> Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-14Merge branch 'master' of ↵David S. Miller1-0/+3
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/ehea/ehea_main.c drivers/net/wireless/iwlwifi/Kconfig drivers/net/wireless/rt2x00/rt61pci.c net/ipv4/inet_timewait_sock.c net/ipv6/raw.c net/mac80211/ieee80211_sta.c
2008-04-13[SCTP]: "list_for_each()" -> "list_for_each_entry()" where appropriate.Robert P. J. Day1-33/+16
Replacing (almost) all invocations of list_for_each() with list_for_each_entry() tightens up the code and allows for the deletion of numerous list iterator variables that are no longer necessary. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-13[SCTP]: Fix protocol violation when receiving an error lenght INIT-ACKGui Jianfeng1-0/+3
When receiving an error length INIT-ACK during COOKIE-WAIT, a 0-vtag ABORT will be responsed. This action violates the protocol apparently. This patch achieves the following things. 1 If the INIT-ACK contains all the fixed parameters, use init-tag recorded from INIT-ACK as vtag. 2 If the INIT-ACK doesn't contain all the fixed parameters, just reflect its vtag. Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-06net: replace remaining __FUNCTION__ occurrencesHarvey Harrison1-7/+7
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[SCTP]: extend exported data in /proc/net/sctp/assocNeil Horman1-0/+3
RFC 3873 specifies several MIB objects that can't be obtained by the current data set exported by /proc/sys/net/sctp/assoc. This patch adds the missing pieces of data that allow us to compute all the objects in the sctpAssocTable object. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-07[SCTP]: Make sure the chunk is off the transmitted list prior to freeing.Vlad Yasevich1-1/+3
In a few instances, we need to remove the chunk from the transmitted list prior to freeing it. This is because the free code doesn't do that any more and so we need to do it manually. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2008-02-05[SCTP]: Stop claiming that this is a "reference implementation"Vlad Yasevich1-4/+4
I was notified by Randy Stewart that lksctp claims to be "the reference implementation". First of all, "the refrence implementation" was the original implementation of SCTP in usersapce written ty Randy and a few others. Second, after looking at the definiton of 'reference implementation', we don't really meet the requirements. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2008-01-29[SCTP]: Update ASCONF processing to conform to spec.Vlad Yasevich1-2/+27
The processing of the ASCONF chunks has changed a lot in the spec. New items are: 1. A list of ASCONF-ACK chunks is now cached 2. The source of the packet is used in response. 3. New handling for unexpect ASCONF chunks. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-09SCTP: Always flush the queue when uncorcking.Vlad Yasevich1-3/+2
When the code calls uncork, trigger a queue flush, even if the queue was not corked. Most callers that explicitely cork the queue will have additinal checks to see if they corked it. Callers who do not cork the queue expect packets to flow when they call uncork. The scneario that showcased this bug happend when we were not able to bundle DATA with outgoing COOKIE-ECHO. As a result the data just sat in the outqueue and did not get transmitted. The application expected a response, but nothing happened. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-11-07SCTP: Fix difference cases of retransmit.Vlad Yasevich1-16/+17
Commit d0ce92910bc04e107b2f3f2048f07e94f570035d broke several retransmit cases including fast retransmit. The reason is that we should only delay by rto while doing retranmists as a result of a timeout. Retransmit as a result of path mtu discover, fast retransmit, or other evernts that should trigger immidiate retransmissions got broken. Also, since rto is doubled prior to marking of packets elegable for retransmission, we never marked correct chunks anyway. The fix is provide a reason for a given retransmission so that we can mark chunks appropriately and to save the old rto value to do comparisons against. All regressions tests passed with this code. Spotted by Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>