summaryrefslogtreecommitdiff
path: root/net/socket.c
AgeCommit message (Collapse)AuthorFilesLines
2021-09-01Merge tag 'net-next-5.15' of ↵Linus Torvalds1-262/+90
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Enable memcg accounting for various networking objects. BPF: - Introduce bpf timers. - Add perf link and opaque bpf_cookie which the program can read out again, to be used in libbpf-based USDT library. - Add bpf_task_pt_regs() helper to access user space pt_regs in kprobes, to help user space stack unwinding. - Add support for UNIX sockets for BPF sockmap. - Extend BPF iterator support for UNIX domain sockets. - Allow BPF TCP congestion control progs and bpf iterators to call bpf_setsockopt(), e.g. to switch to another congestion control algorithm. Protocols: - Support IOAM Pre-allocated Trace with IPv6. - Support Management Component Transport Protocol. - bridge: multicast: add vlan support. - netfilter: add hooks for the SRv6 lightweight tunnel driver. - tcp: - enable mid-stream window clamping (by user space or BPF) - allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD - more accurate DSACK processing for RACK-TLP - mptcp: - add full mesh path manager option - add partial support for MP_FAIL - improve use of backup subflows - optimize option processing - af_unix: add OOB notification support. - ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the router. - mac80211: Target Wake Time support in AP mode. - can: j1939: extend UAPI to notify about RX status. Driver APIs: - Add page frag support in page pool API. - Many improvements to the DSA (distributed switch) APIs. - ethtool: extend IRQ coalesce uAPI with timer reset modes. - devlink: control which auxiliary devices are created. - Support CAN PHYs via the generic PHY subsystem. - Proper cross-chip support for tag_8021q. - Allow TX forwarding for the software bridge data path to be offloaded to capable devices. Drivers: - veth: more flexible channels number configuration. - openvswitch: introduce per-cpu upcall dispatch. - Add internet mix (IMIX) mode to pktgen. - Transparently handle XDP operations in the bonding driver. - Add LiteETH network driver. - Renesas (ravb): - support Gigabit Ethernet IP - NXP Ethernet switch (sja1105): - fast aging support - support for "H" switch topologies - traffic termination for ports under VLAN-aware bridge - Intel 1G Ethernet - support getcrosststamp() with PCIe PTM (Precision Time Measurement) for better time sync - support Credit-Based Shaper (CBS) offload, enabling HW traffic prioritization and bandwidth reservation - Broadcom Ethernet (bnxt) - support pulse-per-second output - support larger Rx rings - Mellanox Ethernet (mlx5) - support ethtool RSS contexts and MQPRIO channel mode - support LAG offload with bridging - support devlink rate limit API - support packet sampling on tunnels - Huawei Ethernet (hns3): - basic devlink support - add extended IRQ coalescing support - report extended link state - Netronome Ethernet (nfp): - add conntrack offload support - Broadcom WiFi (brcmfmac): - add WPA3 Personal with FT to supported cipher suites - support 43752 SDIO device - Intel WiFi (iwlwifi): - support scanning hidden 6GHz networks - support for a new hardware family (Bz) - Xen pv driver: - harden netfront against malicious backends - Qualcomm mobile - ipa: refactor power management and enable automatic suspend - mhi: move MBIM to WWAN subsystem interfaces Refactor: - Ambient BPF run context and cgroup storage cleanup. - Compat rework for ndo_ioctl. Old code removal: - prism54 remove the obsoleted driver, deprecated by the p54 driver. - wan: remove sbni/granch driver" * tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits) net: Add depends on OF_NET for LiteX's LiteETH ipv6: seg6: remove duplicated include net: hns3: remove unnecessary spaces net: hns3: add some required spaces net: hns3: clean up a type mismatch warning net: hns3: refine function hns3_set_default_feature() ipv6: remove duplicated 'net/lwtunnel.h' include net: w5100: check return value after calling platform_get_resource() net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx() net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource() net: mdio-ipq4019: Make use of devm_platform_ioremap_resource() fou: remove sparse errors ipv4: fix endianness issue in inet_rtm_getroute_build_skb() octeontx2-af: Set proper errorcode for IPv4 checksum errors octeontx2-af: Fix static code analyzer reported issues octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg octeontx2-af: Fix loop in free and unmap counter af_unix: fix potential NULL deref in unix_dgram_connect() dpaa2-eth: Replace strlcpy with strscpy octeontx2-af: Use NDC TX for transmit packet data ...
2021-08-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+5
include/linux/netdevice.h net/socket.c d0efb16294d1 ("net: don't unconditionally copy_from_user a struct ifreq for socket ioctls") 876f0bf9d0d5 ("net: socket: simplify dev_ifconf handling") 29c4964822aa ("net: socket: rework compat_ifreq_ioctl()") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-27net: don't unconditionally copy_from_user a struct ifreq for socket ioctlsPeter Collingbourne1-1/+5
A common implementation of isatty(3) involves calling a ioctl passing a dummy struct argument and checking whether the syscall failed -- bionic and glibc use TCGETS (passing a struct termios), and musl uses TIOCGWINSZ (passing a struct winsize). If the FD is a socket, we will copy sizeof(struct ifreq) bytes of data from the argument and return -EFAULT if that fails. The result is that the isatty implementations may return a non-POSIX-compliant value in errno in the case where part of the dummy struct argument is inaccessible, as both struct termios and struct winsize are smaller than struct ifreq (at least on arm64). Although there is usually enough stack space following the argument on the stack that this did not present a practical problem up to now, with MTE stack instrumentation it's more likely for the copy to fail, as the memory following the struct may have a different tag. Fix the problem by adding an early check for whether the ioctl is a valid socket ioctl, and return -ENOTTY if it isn't. Fixes: 44c02a2c3dc5 ("dev_ioctl(): move copyin/copyout to callers") Link: https://linux-review.googlesource.com/id/I869da6cf6daabc3e4b7b82ac979683ba05e27d4d Signed-off-by: Peter Collingbourne <pcc@google.com> Cc: <stable@vger.kernel.org> # 4.19 Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25net: add accept helper not installing fdPavel Begunkov1-34/+37
Introduce and reuse a helper that acts similarly to __sys_accept4_file() but returns struct file instead of installing file descriptor. Will be used by io_uring. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Acked-by: David S. Miller <davem@davemloft.net> Link: https://lore.kernel.org/r/c57b9e8e818d93683a3d24f8ca50ca038d1da8c4.1629888991.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-07-29mctp: Add MCTP baseJeremy Kerr1-0/+1
Add basic Kconfig, an initial (empty) af_mctp source object, and {AF,PF}_MCTP definitions, and the required definitions for a new protocol type. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27net: bridge: move bridge ioctls out of .ndo_do_ioctlArnd Bergmann1-10/+23
Working towards obsoleting the .ndo_do_ioctl operation entirely, stop passing the SIOCBRADDIF/SIOCBRDELIF device ioctl commands into this callback. My first attempt was to add another ndo_siocbr() callback, but as there is only a single driver that takes these commands and there is already a hook mechanism to call directly into this driver, extend this hook instead, and use it for both the deviceless and the device specific ioctl commands. Cc: Roopa Prabhu <roopa@nvidia.com> Cc: Nikolay Aleksandrov <nikolay@nvidia.com> Cc: bridge@lists.linux-foundation.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27net: socket: return changed ifreq from SIOCDEVPRIVATEArnd Bergmann1-1/+1
Some drivers that use SIOCDEVPRIVATE ioctl commands modify the ifreq structure and expect it to be passed back to user space, which has never really happened for compat mode because the calling these drivers through ndo_do_ioctl requires overwriting the ifr_data pointer. Now that all drivers are converted to ndo_siocdevprivate, change it to handle this correctly in both compat and native mode. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27dev_ioctl: pass SIOCDEVPRIVATE data separatelyArnd Bergmann1-42/+13
The compat handlers for SIOCDEVPRIVATE are incorrect for any driver that passes data as part of struct ifreq rather than as an ifr_data pointer, or that passes data back this way, since the compat_ifr_data_ioctl() helper overwrites the ifr_data pointer and does not copy anything back out. Since all drivers using devprivate commands are now converted to the new .ndo_siocdevprivate callback, fix this by adding the missing piece and passing the pointer separately the whole way. This further unifies the native and compat logic for socket ioctls, as the new code now passes the correct pointer as well as the correct data for both native and compat ioctls. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-23net: socket: rework compat_ifreq_ioctl()Arnd Bergmann1-38/+65
compat_ifreq_ioctl() is one of the last users of copy_in_user() and compat_alloc_user_space(), as it attempts to convert the 'struct ifreq' arguments from 32-bit to 64-bit format as used by dev_ioctl() and a couple of socket family specific interpretations. The current implementation works correctly when calling dev_ioctl(), inet_ioctl(), ieee802154_sock_ioctl(), atalk_ioctl(), qrtr_ioctl() and packet_ioctl(). The ioctl handlers for x25, netrom, rose and x25 do not interpret the arguments and only block the corresponding commands, so they do not care. For af_inet6 and af_decnet however, the compat conversion is slightly incorrect, as it will copy more data than the native handler accesses, both of them use a structure that is shorter than ifreq. Replace the copy_in_user() conversion with a pair of accessor functions to read and write the ifreq data in place with the correct length where needed, while leaving the other ones to copy the (already compatible) structures directly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-23net: socket: simplify dev_ifconf handlingArnd Bergmann1-45/+14
The dev_ifconf() calling conventions make compat handling more complicated than necessary, simplify this by moving the in_compat_syscall() check into the function. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-23net: socket: rework SIOC?IFMAP ioctlsArnd Bergmann1-37/+2
SIOCGIFMAP and SIOCSIFMAP currently require compat_alloc_user_space() and copy_in_user() for compat mode. Move the compat handling into the location where the structures are actually used, to avoid using those interfaces and get a clearer implementation. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-23ethtool: improve compat ioctl handlingArnd Bergmann1-124/+1
The ethtool compat ioctl handling is hidden away in net/socket.c, which introduces a couple of minor oddities: - The implementation may end up diverging, as seen in the RXNFC extension in commit 84a1d9c48200 ("net: ethtool: extend RXNFC API to support RSS spreading of filter matches") that does not work in compat mode. - Most architectures do not need the compat handling at all because u64 and compat_u64 have the same alignment. - On x86, the conversion is done for both x32 and i386 user space, but it's actually wrong to do it for x32 and cannot work there. - On 32-bit Arm, it never worked for compat oabi user space, since that needs to do the same conversion but does not. - It would be nice to get rid of both compat_alloc_user_space() and copy_in_user() throughout the kernel. None of these actually seems to be a serious problem that real users are likely to encounter, but fixing all of them actually leads to code that is both shorter and more readable. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-01net: socket: support hardware timestamp conversion to PHC boundYangbo Lu1-6/+13
This patch is to support hardware timestamp conversion to PHC bound. This applies to both RX and TX since their skb handling (for TX, it's skb clone in error queue) all goes through __sock_recv_timestamp. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22net: add pf_family_names[] for protocol familyYejune Deng1-2/+50
Modify the pr_info content from int to char * in sock_register() and sock_unregister(), this looks more readable. Fixed build error in ARCH=sparc64. Signed-off-by: Yejune Deng <yejune.deng@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-12net: make get_net_ns return error if NET_NS is disabledChangbin Du1-13/+0
There is a panic in socket ioctl cmd SIOCGSKNS when NET_NS is not enabled. The reason is that nsfs tries to access ns->ops but the proc_ns_operations is not implemented in this case. [7.670023] Unable to handle kernel NULL pointer dereference at virtual address 00000010 [7.670268] pgd = 32b54000 [7.670544] [00000010] *pgd=00000000 [7.671861] Internal error: Oops: 5 [#1] SMP ARM [7.672315] Modules linked in: [7.672918] CPU: 0 PID: 1 Comm: systemd Not tainted 5.13.0-rc3-00375-g6799d4f2da49 #16 [7.673309] Hardware name: Generic DT based system [7.673642] PC is at nsfs_evict+0x24/0x30 [7.674486] LR is at clear_inode+0x20/0x9c The same to tun SIOCGSKNS command. To fix this problem, we make get_net_ns() return -EINVAL when NET_NS is disabled. Meanwhile move it to right place net/core/net_namespace.c. Signed-off-by: Changbin Du <changbin.du@gmail.com> Fixes: c62cce2caee5 ("net: add an ioctl to get a socket network namespace") Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Christian Brauner <christian.brauner@ubuntu.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-26net: Fix a misspell in socket.cLu Wei1-1/+1
s/addres/address Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Lu Wei <luwei32@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-27Merge tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-blockLinus Torvalds1-10/+0
Pull io_uring thread rewrite from Jens Axboe: "This converts the io-wq workers to be forked off the tasks in question instead of being kernel threads that assume various bits of the original task identity. This kills > 400 lines of code from io_uring/io-wq, and it's the worst part of the code. We've had several bugs in this area, and the worry is always that we could be missing some pieces for file types doing unusual things (recent /dev/tty example comes to mind, userfaultfd reads installing file descriptors is another fun one... - both of which need special handling, and I bet it's not the last weird oddity we'll find). With these identical workers, we can have full confidence that we're never missing anything. That, in itself, is a huge win. Outside of that, it's also more efficient since we're not wasting space and code on tracking state, or switching between different states. I'm sure we're going to find little things to patch up after this series, but testing has been pretty thorough, from the usual regression suite to production. Any issue that may crop up should be manageable. There's also a nice series of further reductions we can do on top of this, but I wanted to get the meat of it out sooner rather than later. The general worry here isn't that it's fundamentally broken. Most of the little issues we've found over the last week have been related to just changes in how thread startup/exit is done, since that's the main difference between using kthreads and these kinds of threads. In fact, if all goes according to plan, I want to get this into the 5.10 and 5.11 stable branches as well. That said, the changes outside of io_uring/io-wq are: - arch setup, simple one-liner to each arch copy_thread() implementation. - Removal of net and proc restrictions for io_uring, they are no longer needed or useful" * tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block: (30 commits) io-wq: remove now unused IO_WQ_BIT_ERROR io_uring: fix SQPOLL thread handling over exec io-wq: improve manager/worker handling over exec io_uring: ensure SQPOLL startup is triggered before error shutdown io-wq: make buffered file write hashed work map per-ctx io-wq: fix race around io_worker grabbing io-wq: fix races around manager/worker creation and task exit io_uring: ensure io-wq context is always destroyed for tasks arch: ensure parisc/powerpc handle PF_IO_WORKER in copy_thread() io_uring: cleanup ->user usage io-wq: remove nr_process accounting io_uring: flag new native workers with IORING_FEAT_NATIVE_WORKERS net: remove cmsg restriction from io_uring based send/recvmsg calls Revert "proc: don't allow async path resolution of /proc/self components" Revert "proc: don't allow async path resolution of /proc/thread-self components" io_uring: move SQPOLL thread io-wq forked worker io-wq: make io_wq_fork_thread() available to other users io-wq: only remove worker from free_list, if it was there io_uring: remove io_identity io_uring: remove any grabbing of context ...
2021-02-24net: remove cmsg restriction from io_uring based send/recvmsg callsJens Axboe1-10/+0
No need to restrict these anymore, as the worker threads are direct clones of the original task. Hence we know for a fact that we can support anything that the regular task can. Since the only user of proto_ops->flags was to flag PROTO_CMSG_DATA_ONLY, kill the member and the flag definition too. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-24Merge tag 'idmapped-mounts-v5.12' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull idmapped mounts from Christian Brauner: "This introduces idmapped mounts which has been in the making for some time. Simply put, different mounts can expose the same file or directory with different ownership. This initial implementation comes with ports for fat, ext4 and with Christoph's port for xfs with more filesystems being actively worked on by independent people and maintainers. Idmapping mounts handle a wide range of long standing use-cases. Here are just a few: - Idmapped mounts make it possible to easily share files between multiple users or multiple machines especially in complex scenarios. For example, idmapped mounts will be used in the implementation of portable home directories in systemd-homed.service(8) where they allow users to move their home directory to an external storage device and use it on multiple computers where they are assigned different uids and gids. This effectively makes it possible to assign random uids and gids at login time. - It is possible to share files from the host with unprivileged containers without having to change ownership permanently through chown(2). - It is possible to idmap a container's rootfs and without having to mangle every file. For example, Chromebooks use it to share the user's Download folder with their unprivileged containers in their Linux subsystem. - It is possible to share files between containers with non-overlapping idmappings. - Filesystem that lack a proper concept of ownership such as fat can use idmapped mounts to implement discretionary access (DAC) permission checking. - They allow users to efficiently changing ownership on a per-mount basis without having to (recursively) chown(2) all files. In contrast to chown (2) changing ownership of large sets of files is instantenous with idmapped mounts. This is especially useful when ownership of a whole root filesystem of a virtual machine or container is changed. With idmapped mounts a single syscall mount_setattr syscall will be sufficient to change the ownership of all files. - Idmapped mounts always take the current ownership into account as idmappings specify what a given uid or gid is supposed to be mapped to. This contrasts with the chown(2) syscall which cannot by itself take the current ownership of the files it changes into account. It simply changes the ownership to the specified uid and gid. This is especially problematic when recursively chown(2)ing a large set of files which is commong with the aforementioned portable home directory and container and vm scenario. - Idmapped mounts allow to change ownership locally, restricting it to specific mounts, and temporarily as the ownership changes only apply as long as the mount exists. Several userspace projects have either already put up patches and pull-requests for this feature or will do so should you decide to pull this: - systemd: In a wide variety of scenarios but especially right away in their implementation of portable home directories. https://systemd.io/HOME_DIRECTORY/ - container runtimes: containerd, runC, LXD:To share data between host and unprivileged containers, unprivileged and privileged containers, etc. The pull request for idmapped mounts support in containerd, the default Kubernetes runtime is already up for quite a while now: https://github.com/containerd/containerd/pull/4734 - The virtio-fs developers and several users have expressed interest in using this feature with virtual machines once virtio-fs is ported. - ChromeOS: Sharing host-directories with unprivileged containers. I've tightly synced with all those projects and all of those listed here have also expressed their need/desire for this feature on the mailing list. For more info on how people use this there's a bunch of talks about this too. Here's just two recent ones: https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf https://fosdem.org/2021/schedule/event/containers_idmap/ This comes with an extensive xfstests suite covering both ext4 and xfs: https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts It covers truncation, creation, opening, xattrs, vfscaps, setid execution, setgid inheritance and more both with idmapped and non-idmapped mounts. It already helped to discover an unrelated xfs setgid inheritance bug which has since been fixed in mainline. It will be sent for inclusion with the xfstests project should you decide to merge this. In order to support per-mount idmappings vfsmounts are marked with user namespaces. The idmapping of the user namespace will be used to map the ids of vfs objects when they are accessed through that mount. By default all vfsmounts are marked with the initial user namespace. The initial user namespace is used to indicate that a mount is not idmapped. All operations behave as before and this is verified in the testsuite. Based on prior discussions we want to attach the whole user namespace and not just a dedicated idmapping struct. This allows us to reuse all the helpers that already exist for dealing with idmappings instead of introducing a whole new range of helpers. In addition, if we decide in the future that we are confident enough to enable unprivileged users to setup idmapped mounts the permission checking can take into account whether the caller is privileged in the user namespace the mount is currently marked with. The user namespace the mount will be marked with can be specified by passing a file descriptor refering to the user namespace as an argument to the new mount_setattr() syscall together with the new MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern of extensibility. The following conditions must be met in order to create an idmapped mount: - The caller must currently have the CAP_SYS_ADMIN capability in the user namespace the underlying filesystem has been mounted in. - The underlying filesystem must support idmapped mounts. - The mount must not already be idmapped. This also implies that the idmapping of a mount cannot be altered once it has been idmapped. - The mount must be a detached/anonymous mount, i.e. it must have been created by calling open_tree() with the OPEN_TREE_CLONE flag and it must not already have been visible in the filesystem. The last two points guarantee easier semantics for userspace and the kernel and make the implementation significantly simpler. By default vfsmounts are marked with the initial user namespace and no behavioral or performance changes are observed. The manpage with a detailed description can be found here: https://git.kernel.org/brauner/man-pages/c/1d7b902e2875a1ff342e036a9f866a995640aea8 In order to support idmapped mounts, filesystems need to be changed and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The patches to convert individual filesystem are not very large or complicated overall as can be seen from the included fat, ext4, and xfs ports. Patches for other filesystems are actively worked on and will be sent out separately. The xfstestsuite can be used to verify that port has been done correctly. The mount_setattr() syscall is motivated independent of the idmapped mounts patches and it's been around since July 2019. One of the most valuable features of the new mount api is the ability to perform mounts based on file descriptors only. Together with the lookup restrictions available in the openat2() RESOLVE_* flag namespace which we added in v5.6 this is the first time we are close to hardened and race-free (e.g. symlinks) mounting and path resolution. While userspace has started porting to the new mount api to mount proper filesystems and create new bind-mounts it is currently not possible to change mount options of an already existing bind mount in the new mount api since the mount_setattr() syscall is missing. With the addition of the mount_setattr() syscall we remove this last restriction and userspace can now fully port to the new mount api, covering every use-case the old mount api could. We also add the crucial ability to recursively change mount options for a whole mount tree, both removing and adding mount options at the same time. This syscall has been requested multiple times by various people and projects. There is a simple tool available at https://github.com/brauner/mount-idmapped that allows to create idmapped mounts so people can play with this patch series. I'll add support for the regular mount binary should you decide to pull this in the following weeks: Here's an example to a simple idmapped mount of another user's home directory: u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt u1001@f2-vm:/$ ls -al /home/ubuntu/ total 28 drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 . drwxr-xr-x 4 root root 4096 Oct 28 04:00 .. -rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history -rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout -rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc -rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile -rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful -rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo u1001@f2-vm:/$ ls -al /mnt/ total 28 drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 . drwxr-xr-x 29 root root 4096 Oct 28 22:01 .. -rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history -rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout -rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc -rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile -rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful -rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo u1001@f2-vm:/$ touch /mnt/my-file u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file u1001@f2-vm:/$ ls -al /mnt/my-file -rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file u1001@f2-vm:/$ ls -al /home/ubuntu/my-file -rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file u1001@f2-vm:/$ getfacl /mnt/my-file getfacl: Removing leading '/' from absolute path names # file: mnt/my-file # owner: u1001 # group: u1001 user::rw- user:u1001:rwx group::rw- mask::rwx other::r-- u1001@f2-vm:/$ getfacl /home/ubuntu/my-file getfacl: Removing leading '/' from absolute path names # file: home/ubuntu/my-file # owner: ubuntu # group: ubuntu user::rw- user:ubuntu:rwx group::rw- mask::rwx other::r--" * tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits) xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl xfs: support idmapped mounts ext4: support idmapped mounts fat: handle idmapped mounts tests: add mount_setattr() selftests fs: introduce MOUNT_ATTR_IDMAP fs: add mount_setattr() fs: add attr_flags_to_mnt_flags helper fs: split out functions to hold writers namespace: only take read lock in do_reconfigure_mnt() mount: make {lock,unlock}_mount_hash() static namespace: take lock_mount_hash() directly when changing flags nfs: do not export idmapped mounts overlayfs: do not mount on top of idmapped mounts ecryptfs: do not mount on top of idmapped mounts ima: handle idmapped mounts apparmor: handle idmapped mounts fs: make helpers idmap mount aware exec: handle idmapped mounts would_dump: handle idmapped mounts ...
2021-01-24fs: make helpers idmap mount awareChristian Brauner1-2/+3
Extend some inode methods with an additional user namespace argument. A filesystem that is aware of idmapped mounts will receive the user namespace the mount has been marked with. This can be used for additional permission checking and also to enable filesystems to translate between uids and gids if they need to. We have implemented all relevant helpers in earlier patches. As requested we simply extend the exisiting inode method instead of introducing new ones. This is a little more code churn but it's mostly mechanical and doesnt't leave us with additional inode methods. Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24acl: handle idmapped mountsChristian Brauner1-0/+1
The posix acl permission checking helpers determine whether a caller is privileged over an inode according to the acls associated with the inode. Add helpers that make it possible to handle acls on idmapped mounts. The vfs and the filesystems targeted by this first iteration make use of posix_acl_fix_xattr_from_user() and posix_acl_fix_xattr_to_user() to translate basic posix access and default permissions such as the ACL_USER and ACL_GROUP type according to the initial user namespace (or the superblock's user namespace) to and from the caller's current user namespace. Adapt these two helpers to handle idmapped mounts whereby we either map from or into the mount's user namespace depending on in which direction we're translating. Similarly, cap_convert_nscap() is used by the vfs to translate user namespace and non-user namespace aware filesystem capabilities from the superblock's user namespace to the caller's user namespace. Enable it to handle idmapped mounts by accounting for the mount's user namespace. In addition the fileystems targeted in the first iteration of this patch series make use of the posix_acl_chmod() and, posix_acl_update_mode() helpers. Both helpers perform permission checks on the target inode. Let them handle idmapped mounts. These two helpers are called when posix acls are set by the respective filesystems to handle this case we extend the ->set() method to take an additional user namespace argument to pass the mount's user namespace down. Link: https://lore.kernel.org/r/20210121131959.646623-9-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21bpf: Remove extra lock_sock for TCP_ZEROCOPY_RECEIVEStanislav Fomichev1-0/+3
Add custom implementation of getsockopt hook for TCP_ZEROCOPY_RECEIVE. We skip generic hooks for TCP_ZEROCOPY_RECEIVE and have a custom call in do_tcp_getsockopt using the on-stack data. This removes 3% overhead for locking/unlocking the socket. Without this patch: 3.38% 0.07% tcp_mmap [kernel.kallsyms] [k] __cgroup_bpf_run_filter_getsockopt | --3.30%--__cgroup_bpf_run_filter_getsockopt | --0.81%--__kmalloc With the patch applied: 0.52% 0.12% tcp_mmap [kernel.kallsyms] [k] __cgroup_bpf_run_filter_getsockopt_kern Note, exporting uapi/tcp.h requires removing netinet/tcp.h from test_progs.h because those headers have confliciting definitions. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20210115163501.805133-2-sdf@google.com
2020-12-16Merge tag 'for-5.11/io_uring-2020-12-14' of git://git.kernel.dk/linux-blockLinus Torvalds1-3/+12
Pull io_uring updates from Jens Axboe: "Fairly light set of changes this time around, and mostly some bits that were pushed out to 5.11 instead of 5.10, fixes/cleanups, and a few features. In particular: - Cleanups around iovec import (David Laight, Pavel) - Add timeout support for io_uring_enter(2), which enables us to clean up liburing and avoid a timeout sqe submission in the completion path. The big win here is that it allows setups that split SQ and CQ handling into separate threads to avoid locking, as the CQ side will no longer submit when timeouts are needed when waiting for events (Hao Xu) - Add support for socket shutdown, and renameat/unlinkat. - SQPOLL cleanups and improvements (Xiaoguang Wang) - Allow SQPOLL setups for CAP_SYS_NICE, and enable regular (non-fixed) files to be used. - Cancelation improvements (Pavel) - Fixed file reference improvements (Pavel) - IOPOLL related race fixes (Pavel) - Lots of other little fixes and cleanups (mostly Pavel)" * tag 'for-5.11/io_uring-2020-12-14' of git://git.kernel.dk/linux-block: (43 commits) io_uring: fix io_cqring_events()'s noflush io_uring: fix racy IOPOLL flush overflow io_uring: fix racy IOPOLL completions io_uring: always let io_iopoll_complete() complete polled io io_uring: add timeout update io_uring: restructure io_timeout_cancel() io_uring: fix files cancellation io_uring: use bottom half safe lock for fixed file data io_uring: fix miscounting ios_left io_uring: change submit file state invariant io_uring: check kthread stopped flag when sq thread is unparked io_uring: share fixed_file_refs b/w multiple rsrcs io_uring: replace inflight_wait with tctx->wait io_uring: don't take fs for recvmsg/sendmsg io_uring: only wake up sq thread while current task is in io worker context io_uring: don't acquire uring_lock twice io_uring: initialize 'timeout' properly in io_sq_thread() io_uring: refactor io_sq_thread() handling io_uring: always batch cancel in *cancel_files() io_uring: pass files into kill timeouts/poll ...
2020-12-05net: Remove the err argument from sock_from_fileFlorent Revest1-11/+16
Currently, the sock_from_file prototype takes an "err" pointer that is either not set or set to -ENOTSOCK IFF the returned socket is NULL. This makes the error redundant and it is ignored by a few callers. This patch simplifies the API by letting callers deduce the error based on whether the returned socket is NULL or not. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Florent Revest <revest@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: KP Singh <kpsingh@google.com> Link: https://lore.kernel.org/bpf/20201204113609.1850150-1-revest@google.com
2020-11-24net: don't include ethtool.h from netdevice.hJakub Kicinski1-0/+1
linux/netdevice.h is included in very many places, touching any of its dependecies causes large incremental builds. Drop the linux/ethtool.h include, linux/netdevice.h just needs a forward declaration of struct ethtool_ops. Fix all the places which made use of this implicit include. Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20201120225052.1427503-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-23net: provide __sys_shutdown_sock() that takes a socketJens Axboe1-3/+12
No functional changes in this patch, needed to provide io_uring support for shutdown(2). Cc: netdev@vger.kernel.org Cc: David S. Miller <davem@davemloft.net> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-18net: wan: Delete the DLCI / SDLA driversXie He1-25/+0
The DLCI driver (dlci.c) implements the Frame Relay protocol. However, we already have another newer and better implementation of Frame Relay provided by the HDLC_FR driver (hdlc_fr.c). The DLCI driver's implementation of Frame Relay is used by only one hardware driver in the kernel - the SDLA driver (sdla.c). The SDLA driver provides Frame Relay support for the Sangoma S50x devices. However, the vendor provides their own driver (along with their own multi-WAN-protocol implementations including Frame Relay), called WANPIPE. I believe most users of the hardware would use the vendor-provided WANPIPE driver instead. (The WANPIPE driver was even once in the kernel, but was deleted in commit 8db60bcf3021 ("[WAN]: Remove broken and unmaintained Sangoma drivers.") because the vendor no longer updated the in-kernel WANPIPE driver.) Cc: Mike McLagan <mike.mclagan@linux.org> Signed-off-by: Xie He <xie.he.0141@gmail.com> Link: https://lore.kernel.org/r/20201114150921.685594-1-xie.he.0141@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-2/+4
Rejecting non-native endian BTF overlapped with the addition of support for it. The rest were more simple overlapping changes, except the renesas ravb binding update, which had to follow a file move as well as a YAML conversion. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-03net: add WARN_ONCE in kernel_sendpage() for improper zero-copy sendColy Li1-2/+4
If a page sent into kernel_sendpage() is a slab page or it doesn't have ref_count, this page is improper to send by the zero copy sendpage() method. Otherwise such page might be unexpected released in network code path and causes impredictable panic due to kernel memory management data structure corruption. This path adds a WARN_ON() on the sending page before sends it into the concrete zero-copy sendpage() method, if the page is improper for the zero-copy sendpage() method, a warning message can be observed before the consequential unpredictable kernel panic. This patch does not change existing kernel_sendpage() behavior for the improper page zero-copy send, it just provides hint warning message for following potential panic due the kernel memory heap corruption. Signed-off-by: Coly Li <colyli@suse.de> Cc: Cong Wang <amwang@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David S. Miller <davem@davemloft.net> Cc: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+2
We got slightly different patches removing a double word in a comment in net/ipv4/raw.c - picked the version from net. Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached values instead of VNIC login response buffer (following what commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login response buffer") did). Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-08-27net: Fix some commentsMiaohe Lin1-2/+2
Fix some comments, including wrong function name, duplicated word and so on. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25io_uring: allow tcp ancillary data for __sys_recvmsg_sock()Luke Hsiao1-3/+5
For TCP tx zero-copy, the kernel notifies the process of completions by queuing completion notifications on the socket error queue. This patch allows reading these notifications via recvmsg to support TCP tx zero-copy. Ancillary data was originally disallowed due to privilege escalation via io_uring's offloading of sendmsg() onto a kernel thread with kernel credentials (https://crbug.com/project-zero/1975). So, we must ensure that the socket type is one where the ancillary data types that are delivered on recvmsg are plain data (no file descriptors or values that are translated based on the identity of the calling process). This was tested by using io_uring to call recvmsg on the MSG_ERRQUEUE with tx zero-copy enabled. Before this patch, we received -EINVALID from this specific code path. After this patch, we could read tcp tx zero-copy completion notifications from the MSG_ERRQUEUE. Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Arjun Roy <arjunroy@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jann Horn <jannh@google.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Luke Hsiao <lukehsiao@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-10net: Revert "net: optimize the sockptr_t for unified kernel/user address spaces"Christoph Hellwig1-5/+1
This reverts commits 6d04fe15f78acdf8e32329e208552e226f7a8ae6 and a31edb2059ed4e498f9aa8230c734b59d0ad797a. It turns out the idea to share a single pointer for both kernel and user space address causes various kinds of problems. So use the slightly less optimal version that uses an extra bit, but which is guaranteed to be safe everywhere. Fixes: 6d04fe15f78a ("net: optimize the sockptr_t for unified kernel/user address spaces") Reported-by: Eric Dumazet <edumazet@google.com> Reported-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-09net: Convert to use the fallthrough macroMiaohe Lin1-3/+3
Convert the uses of fallthrough comments to fallthrough macro. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-09net: Remove meaningless jump label out_fsMiaohe Lin1-2/+1
The out_fs jump label has nothing to do but goto out. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-09net: Set fput_needed iff FDPUT_FPUT is setMiaohe Lin1-1/+1
We should fput() file iff FDPUT_FPUT is set. So we should set fput_needed accordingly. Fixes: 00e188ef6a7e ("sockfd_lookup_light(): switch to fdget^W^Waway from fget_light") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-09net: Use helper function fdput()Miaohe Lin1-4/+2
Use helper function fdput() to fput() the file iff FDPUT_FPUT is set. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28net: improve the user pointer check in init_user_sockptrChristoph Hellwig1-1/+1
Make sure not just the pointer itself but the whole range lies in the user address space. For that pass the length and then use the access_ok helper to do the check. Fixes: 6d04fe15f78a ("net: optimize the sockptr_t for unified kernel/user address spaces") Reported-by: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-25net: optimize the sockptr_t for unified kernel/user address spacesChristoph Hellwig1-1/+5
For architectures like x86 and arm64 we don't need the separate bit to indicate that a pointer is a kernel pointer as the address spaces are unified. That way the sockptr_t can be reduced to a union of two pointers, which leads to nicer calling conventions. The only caveat is that we need to check that users don't pass in kernel address and thus gain access to kernel memory. Thus the USER_SOCKPTR helper is replaced with a init_user_sockptr function that does this check and returns an error if it fails. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-25net: pass a sockptr_t into ->setsockoptChristoph Hellwig1-16/+7
Rework the remaining setsockopt code to pass a sockptr_t instead of a plain user pointer. This removes the last remaining set_fs(KERNEL_DS) outside of architecture specific code. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154] Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-25net: switch sock_set_timeout to sockptr_tChristoph Hellwig1-1/+2
Pass a sockptr_t to prepare for set_fs-less handling of the kernel pointer from bpf-cgroup. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: make ->{get,set}sockopt in proto_ops optionalChristoph Hellwig1-0/+4
Just check for a NULL method instead of wiring up sock_no_{get,set}sockopt. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: remove compat_sys_{get,set}sockoptChristoph Hellwig1-11/+14
Now that the ->compat_{get,set}sockopt proto_ops methods are gone there is no good reason left to keep the compat syscalls separate. This fixes the odd use of unsigned int for the compat_setsockopt optlen and the missing sock_use_custom_sol_socket. It would also easily allow running the eBPF hooks for the compat syscalls, but such a large change in behavior does not belong into a consolidation patch like this one. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: streamline __sys_getsockoptChristoph Hellwig1-17/+14
Return early when sockfd_lookup_light fails to reduce a level of indentation for most of the function body. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: streamline __sys_setsockoptChristoph Hellwig1-30/+27
Return early when sockfd_lookup_light fails to reduce a level of indentation for most of the function body. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14net: socket: Move kerneldoc next to function it documentsAndrew Lunn1-9/+8
Fix the warning "Function parameter or member 'inode' not described in '__sock_release'' due to the kerneldoc being placed before __sock_release() not sock_release(), which does not take an inode parameter. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-05net: use mptcp setsockopt function for SOL_SOCKET on mptcp socketsFlorian Westphal1-1/+12
setsockopt(mptcp_fd, SOL_SOCKET, ...)... appears to work (returns 0), but it has no effect -- this is because the MPTCP layer never has a chance to copy the settings to the subflow socket. Skip the generic handling for the mptcp case and instead call the mptcp specific handler instead for SOL_SOCKET too. Next patch adds more specific handling for SOL_SOCKET to mptcp. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29net: remove kernel_setsockoptChristoph Hellwig1-31/+0
No users left. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: remove kernel_getsockoptChristoph Hellwig1-34/+0
No users left. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-19ipv4,appletalk: move SIOCADDRT and SIOCDELRT handling into ->compat_ioctlChristoph Hellwig1-62/+0
To prepare removing the global routing_ioctl hack start lifting the code into the ipv4 and appletalk ->compat_ioctl handlers. Unlike the existing handler we don't bother copying in the name - there are no compat issues for char arrays. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>