| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently, when GETDEVICEINFO returns multiple locations where each
is a different IP but the server's identity is same as MDS, then
nfs4_set_ds_client() finds the existing nfs_client structure which
has the MDS's max_connect value (and if it's 1), then the 1st IP
on the DS's list will get dropped due to MDS trunking rules. Other
IPs would be added as they fall under the pnfs trunking rules.
For the list of IPs the 1st goes thru calling nfs4_set_ds_client()
which will eventually call nfs4_add_trunk() and call into
rpc_clnt_test_and_add_xprt() which has the check for MDS trunking.
The other IPs (after the 1st one), would call rpc_clnt_add_xprt()
which doesn't go thru that check.
nfs4_add_trunk() is called when MDS trunking is happening and it
needs to enforce the usage of max_connect mount option of the
1st mount. However, this shouldn't be applied to pnfs flow.
Instead, this patch proposed to treat MDS=DS as DS trunking and
make sure that MDS's max_connect limit does not apply to the
1st IP returned in the GETDEVICEINFO list. It does so by
marking the newly created client with a new flag NFS_CS_PNFS
which then used to pass max_connect value to use into the
rpc_clnt_test_and_add_xprt() instead of the existing rpc
client's max_connect value set by the MDS connection.
For example, mount was done without max_connect value set
so MDS's rpc client has cl_max_connect=1. Upon calling into
rpc_clnt_test_and_add_xprt() and using rpc client's value,
the caller passes in max_connect value which is previously
been set in the pnfs path (as a part of handling
GETDEVICEINFO list of IPs) in nfs4_set_ds_client().
However, when NFS_CS_PNFS flag is not set and we know we
are doing MDS trunking, comparing a new IP of the same
server, we then set the max_connect value to the
existing MDS's value and pass that into
rpc_clnt_test_and_add_xprt().
Fixes: dc48e0abee24 ("SUNRPC enforce creation of no more than max_connect xprts")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This reverts commit 0701214cd6e66585a999b132eb72ae0489beb724.
The premise of this commit was incorrect. There are exactly 2 cases
where rpcauth_checkverf() will return an error:
1) If there was an XDR decode problem (i.e. garbage data).
2) If gss_validate() had a problem verifying the RPCSEC_GSS MIC.
In the second case, there are again 2 subcases:
a) The GSS context expires, in which case gss_validate() will force a
new context negotiation on retry by invalidating the cred.
b) The sequence number check failed because an RPC call timed out, and
the client retransmitted the request using a new sequence number,
as required by RFC2203.
In neither subcase is this a fatal error.
Reported-by: Russell Cattelan <cattelan@thebarn.com>
Fixes: 0701214cd6e6 ("SUNRPC: Fail faster on bad verifier")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
If the server rejects the credential as being stale, or bad, then we
should mark it for revalidation before retransmitting.
Fixes: 7f5667a5f8c4 ("SUNRPC: Clean up rpc_verify_header()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Pull NFS client updates from Anna Schumaker:
"New Features:
- Enable the NFS v4.2 READ_PLUS operation by default
Stable Fixes:
- NFSv4/pnfs: minor fix for cleanup path in nfs4_get_device_info
- NFS: Fix a potential data corruption
Bugfixes:
- Fix various READ_PLUS issues including:
- smatch warnings
- xdr size calculations
- scratch buffer handling
- 32bit / highmem xdr page handling
- Fix checkpatch errors in file.c
- Fix redundant readdir request after an EOF
- Fix handling of COPY ERR_OFFLOAD_NO_REQ
- Fix assignment of xprtdata.cred
Cleanups:
- Remove unused xprtrdma function declarations
- Clean up an integer overflow check to avoid a warning
- Clean up #includes in dns_resolve.c
- Clean up nfs4_get_device_info so we don't pass a NULL pointer
to __free_page()
- Clean up sunrpc TCP socket timeout configuration
- Guard against READDIR loops when entry names are too long
- Use EXCHID4_FLAG_USE_PNFS_DS for DS servers"
* tag 'nfs-for-6.6-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (22 commits)
pNFS: Fix assignment of xprtdata.cred
NFSv4.2: fix handling of COPY ERR_OFFLOAD_NO_REQ
NFS: Guard against READDIR loop when entry names exceed MAXNAMELEN
NFSv4.1: use EXCHGID4_FLAG_USE_PNFS_DS for DS server
NFS/pNFS: Set the connect timeout for the pNFS flexfiles driver
SUNRPC: Don't override connect timeouts in rpc_clnt_add_xprt()
SUNRPC: Allow specification of TCP client connect timeout at setup
SUNRPC: Refactor and simplify connect timeout
SUNRPC: Set the TCP_SYNCNT to match the socket timeout
NFS: Fix a potential data corruption
nfs: fix redundant readdir request after get eof
nfs/blocklayout: Use the passed in gfp flags
filemap: Fix errors in file.c
NFSv4/pnfs: minor fix for cleanup path in nfs4_get_device_info
NFS: Move common includes outside ifdef
SUNRPC: clean up integer overflow check
xprtrdma: Remove unused function declaration rpcrdma_bc_post_recv()
NFS: Enable the READ_PLUS operation by default
SUNRPC: kmap() the xdr pages during decode
NFSv4.2: Rework scratch handling for READ_PLUS (again)
...
|
|
Pull nfsd updates from Chuck Lever:
"I'm thrilled to announce that the Linux in-kernel NFS server now
offers NFSv4 write delegations. A write delegation enables a client to
cache data and metadata for a single file more aggressively, reducing
network round trips and server workload. Many thanks to Dai Ngo for
contributing this facility, and to Jeff Layton and Neil Brown for
reviewing and testing it.
This release also sees the removal of all support for DES- and
triple-DES-based Kerberos encryption types in the kernel's SunRPC
implementation. These encryption types have been deprecated by the
Internet community for years and are considered insecure. This change
affects both the in-kernel NFS client and server.
The server's UDP and TCP socket transports have now fully adopted
David Howells' new bio_vec iterator so that no more than one sendmsg()
call is needed to transmit each RPC message. In particular, this helps
kTLS optimize record boundaries when sending RPC-with-TLS replies, and
it takes the server a baby step closer to handling file I/O via
folios.
We've begun work on overhauling the SunRPC thread scheduler to remove
a costly linked-list walk when looking for an idle RPC service thread
to wake. The pre-requisites are included in this release. Thanks to
Neil Brown for his ongoing work on this improvement"
* tag 'nfsd-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (56 commits)
Documentation: Add missing documentation for EXPORT_OP flags
SUNRPC: Remove unused declaration rpc_modcount()
SUNRPC: Remove unused declarations
NFSD: da_addr_body field missing in some GETDEVICEINFO replies
SUNRPC: Remove return value of svc_pool_wake_idle_thread()
SUNRPC: make rqst_should_sleep() idempotent()
SUNRPC: Clean up svc_set_num_threads
SUNRPC: Count ingress RPC messages per svc_pool
SUNRPC: Deduplicate thread wake-up code
SUNRPC: Move trace_svc_xprt_enqueue
SUNRPC: Add enum svc_auth_status
SUNRPC: change svc_xprt::xpt_flags bits to enum
SUNRPC: change svc_rqst::rq_flags bits to enum
SUNRPC: change svc_pool::sp_flags bits to enum
SUNRPC: change cache_head.flags bits to enum
SUNRPC: remove timeout arg from svc_recv()
SUNRPC: change svc_recv() to return void.
SUNRPC: call svc_process() from svc_recv().
nfsd: separate nfsd_last_thread() from nfsd_put()
nfsd: Simplify code around svc_exit_thread() call in nfsd()
...
|
|
The returned value is not used (any more), so don't return it.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Based on its name you would think that rqst_should_sleep() would be
read-only, not changing anything. But in fact it will clear
SP_TASK_PENDING if that was set. This is surprising, and it blurs the
line between "check for work to do" and "dequeue work to do".
So change the "test_and_clear" to simple "test" and clear the bit once
the thread has decided to wake up and return to the caller.
With this, it makes sense to *always* set SP_TASK_PENDING when asked,
rather than to set it only if no thread could be woken up.
[ cel: Previously TASK_PENDING indicated there is work waiting but no
idle threads were found to pick up that work. After this patch, it acts
as an XPT_BUSY flag for wake-ups that have no associated xprt. ]
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Document the API contract and remove stale or obvious comments.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_xprt_enqueue() can be costly, since it involves selecting and
waking up a process.
More than one enqueue is done per incoming RPC. For example,
svc_data_ready() enqueues, and so does svc_xprt_receive(). Also, if
an RPC message requires more than one call to ->recvfrom() to
receive it fully, each one of those calls does an enqueue.
To get a sense of the average number of transport enqueue operations
needed to process an incoming RPC message, re-use the "packets" pool
stat. Track the number of complete RPC messages processed by each
thread pool.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Refactor: Extract the loop that finds an idle service thread from
svc_xprt_enqueue() and svc_wake_up(). Both functions do just about
the same thing.
Note that svc_wake_up() currently does not hold the RCU read lock
while waking the target thread. It indeed should hold the lock, just
as svc_xprt_enqueue() does, to ensure the rqstp does not vanish
during the wake-up. This patch adds the RCU lock for svc_wake_up().
Note that shrinking the pool thread count is rare, and calls to
svc_wake_up() are also quite infrequent. In practice, this race is
very unlikely to be hit, so we are not marking the lock fix for
stable backport at this time.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The xpt_flags field frequently changes between the time that
svc_xprt_ready() grabs a copy and execution flow arrives at the
tracepoint at the tail of svc_xprt_enqueue(). In fact, there's
usually a sleep/wake-up in there, so those flags are almost
guaranteed to be different.
It would be more useful to record the exact flags that were used to
decide whether the transport is ready, so move the tracepoint.
Moving it means the tracepoint can't pick up the waker's pid. That
can be added to struct svc_rqst if it turns out that is important.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
In addition to the benefits of using an enum rather than a set of
macros, we now have a named type that can improve static type
checking of function return values.
As part of this change, I removed a stale comment from svcauth.h;
the return values from current implementations of the
auth_ops::release method are all zero/negative errno, not the SVC_OK
enum values as the old comment suggested.
Suggested-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Most svc threads have no interest in a timeout.
nfsd sets it to 1 hour, but this is a wart of no significance.
lockd uses the timeout so that it can call nlmsvc_retry_blocked().
It also sometimes calls svc_wake_up() to ensure this is called.
So change lockd to be consistent and always use svc_wake_up() to trigger
nlmsvc_retry_blocked() - using a timer instead of a timeout to
svc_recv().
And change svc_recv() to not take a timeout arg.
This makes the sp_threads_timedout counter always zero.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_recv() currently returns a 0 on success or one of two errors:
- -EAGAIN means no message was successfully received
- -EINTR means the thread has been told to stop
Previously nfsd would stop as the result of a signal as well as
following kthread_stop(). In that case the difference was useful: EINTR
means stop unconditionally. EAGAIN means stop if kthread_should_stop(),
continue otherwise.
Now threads only exit when kthread_should_stop() so we don't need the
distinction.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
All callers of svc_recv() go on to call svc_process() on success.
Simplify callers by having svc_recv() do that for them.
This loses one call to validate_process_creds() in nfsd. That was
debugging code added 14 years ago. I don't think we need to keep it.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The original implementation of nfsd used signals to stop threads during
shutdown.
In Linux 2.3.46pre5 nfsd gained the ability to shutdown threads
internally it if was asked to run "0" threads. After this user-space
transitioned to using "rpc.nfsd 0" to stop nfsd and sending signals to
threads was no longer an important part of the API.
In commit 3ebdbe5203a8 ("SUNRPC: discard svo_setup and rename
svc_set_num_threads_sync()") (v5.17-rc1~75^2~41) we finally removed the
use of signals for stopping threads, using kthread_stop() instead.
This patch makes the "obvious" next step and removes the ability to
signal nfsd threads - or any svc threads. nfsd stops allowing signals
and we don't check for their delivery any more.
This will allow for some simplification in later patches.
A change worth noting is in nfsd4_ssc_setup_dul(). There was previously
a signal_pending() check which would only succeed when the thread was
being shut down. It should really have tested kthread_should_stop() as
well. Now it just does the latter, not the former.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
With large NFS WRITE requests on TCP, I measured 5-10 thread wake-
ups to receive each request. This is because the socket layer
calls ->sk_data_ready() frequently, and each call triggers a
thread wake-up. Each recvmsg() seems to pull in less than 100KB.
Have the socket layer hold ->sk_data_ready() calls until the full
incoming message has arrived to reduce the wake-up rate.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Flamegraph analysis showed that the cork/uncork calls consume
nearly a third of the CPU time spent in svc_tcp_sendto(). The
other two consumers are mutex lock/unlock and svc_tcp_sendmsg().
Now that svc_tcp_sendto() coalesces RPC messages properly, there
is no need to introduce artificial delays to prevent sending
partial messages.
After applying this change, I measured a 1.2K read IOPS increase
for 8KB random I/O (several percent) on 56Gb IP over IB.
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Commit da1661b93bf4 ("SUNRPC: Teach server to use xprt_sock_sendmsg
for socket sends") modified svc_udp_sendto() to use xprt_sock_sendmsg()
because we originally believed xprt_sock_sendmsg() would be needed
for TLS support. That does not actually appear to be the case.
In addition, the linkage between the client and server send code has
been a bit of a maintenance headache because of the distinct ways
that the client and server handle memory allocation.
Going forward, eventually the XDR layer will deal with its buffers
in the form of bio_vec arrays, so convert this function accordingly.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
There is now enough infrastructure in place to combine the stream
record marker into the biovec array used to send each outgoing RPC
message on TCP. The whole message can be more efficiently sent with
a single call to sock_sendmsg() using a bio_vec iterator.
Note that this also helps with RPC-with-TLS: the TLS implementation
can now clearly see where the upper layer message boundaries are.
Before, it would send each component of the xdr_buf (record marker,
head, page payload, tail) in separate TLS records.
Suggested-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add a helper to convert a whole xdr_buf directly into an array of
bio_vecs, then send this array instead of iterating piecemeal over
the xdr_buf containing the outbound RPC message.
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
These functions are no longer used.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
All supported encryption types now use the same context import
function.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This code is now always on, so the ifdef can be removed.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
We no longer support importing v1 contexts.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This function is no longer used.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
None of this code can be enabled any more.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
These enctypes can no longer be enabled via CONFIG.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The DES3 encryption type is no longer implemented.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Make it impossible to enable support for the DES or DES3 Kerberos
encryption types in SunRPC. These enctypes were deprecated by RFCs
6649 and 8429 because they are known to be insecure.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Jeff confirmed his original fix addressed his pynfs test failure,
but this same bug also impacted qemu: accessing qcow2 virtual disks
using direct I/O was failing. Jeff's fix missed that you have to
shorten the bio_vec element by the same amount as you increased
the page offset.
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Fixes: c96e2a695e00 ("sunrpc: set the bv_offset of first bvec in svc_tcp_sendmsg")
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations
- Store netdevs in an xarray, to simplify iterating over netdevs
- Refactor nexthop selection for multipath routes
- Improve sched class lifetime handling
- Add backup nexthop ID support for bridge
- Implement drop reasons support in openvswitch
- Several data races annotations and fixes
- Constify the sk parameter of routing functions
- Prepend kernel version to netconsole message
Protocols:
- Implement support for TCP probing the peer being under memory
pressure
- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes
- In-kernel support for the TLS alert protocol
- Better support for UDP reuseport with connected sockets
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size
- Get rid of additional ancillary per MPTCP connection struct socket
- Implement support for BPF-based MPTCP packet schedulers
- Format MPTCP subtests selftests results in TAP
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation
BPF:
- Multi-buffer support in AF_XDP
- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds
- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it
- Add SO_REUSEPORT support for TC bpf_sk_assign
- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64
- Support defragmenting IPv(4|6) packets in BPF
- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling
- Introduce bpf map element count and enable it for all program types
- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress
- Add uprobe support for the bpf_get_func_ip helper
- Check skb ownership against full socket
- Support for up to 12 arguments in BPF trampoline
- Extend link_info for kprobe_multi and perf_event links
Netfilter:
- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types
Driver API:
- Page pool optimizations, to improve data locality and cache usage
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers
- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info
- Extend and use the yaml devlink specs to [re]generate the split ops
- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes
- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool
- Remove phylink legacy mode support
- Support offload LED blinking to phy
- Add devlink port function attributes for IPsec
New hardware / drivers:
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers:
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering"
* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs timestamp updates from Christian Brauner:
"This adds VFS support for multi-grain timestamps and converts tmpfs,
xfs, ext4, and btrfs to use them. This carries acks from all relevant
filesystems.
The VFS always uses coarse-grained timestamps when updating the ctime
and mtime after a change. This has the benefit of allowing filesystems
to optimize away a lot of metadata updates, down to around 1 per
jiffy, even when a file is under heavy writes.
Unfortunately, this has always been an issue when we're exporting via
NFSv3, which relies on timestamps to validate caches. A lot of changes
can happen in a jiffy, so timestamps aren't sufficient to help the
client decide to invalidate the cache.
Even with NFSv4, a lot of exported filesystems don't properly support
a change attribute and are subject to the same problems with timestamp
granularity. Other applications have similar issues with timestamps
(e.g., backup applications).
If we were to always use fine-grained timestamps, that would improve
the situation, but that becomes rather expensive, as the underlying
filesystem would have to log a lot more metadata updates.
This introduces fine-grained timestamps that are used when they are
actively queried.
This uses the 31st bit of the ctime tv_nsec field to indicate that
something has queried the inode for the mtime or ctime. When this flag
is set, on the next mtime or ctime update, the kernel will fetch a
fine-grained timestamp instead of the usual coarse-grained one.
As POSIX generally mandates that when the mtime changes, the ctime
must also change the kernel always stores normalized ctime values, so
only the first 30 bits of the tv_nsec field are ever used.
Filesytems can opt into this behavior by setting the FS_MGTIME flag in
the fstype. Filesystems that don't set this flag will continue to use
coarse-grained timestamps.
Various preparatory changes, fixes and cleanups are included:
- Fixup all relevant places where POSIX requires updating ctime
together with mtime. This is a wide-range of places and all
maintainers provided necessary Acks.
- Add new accessors for inode->i_ctime directly and change all
callers to rely on them. Plain accesses to inode->i_ctime are now
gone and it is accordingly rename to inode->__i_ctime and commented
as requiring accessors.
- Extend generic_fillattr() to pass in a request mask mirroring in a
sense the statx() uapi. This allows callers to pass in a request
mask to only get a subset of attributes filled in.
- Rework timestamp updates so it's possible to drop the @now
parameter the update_time() inode operation and associated helpers.
- Add inode_update_timestamps() and convert all filesystems to it
removing a bunch of open-coding"
* tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (107 commits)
btrfs: convert to multigrain timestamps
ext4: switch to multigrain timestamps
xfs: switch to multigrain timestamps
tmpfs: add support for multigrain timestamps
fs: add infrastructure for multigrain timestamps
fs: drop the timespec64 argument from update_time
xfs: have xfs_vn_update_time gets its own timestamp
fat: make fat_update_time get its own timestamp
fat: remove i_version handling from fat_update_time
ubifs: have ubifs_update_time use inode_update_timestamps
btrfs: have it use inode_update_timestamps
fs: drop the timespec64 arg from generic_update_time
fs: pass the request_mask to generic_fillattr
fs: remove silly warning from current_time
gfs2: fix timestamp handling on quota inodes
fs: rename i_ctime field to __i_ctime
selinux: convert to ctime accessor functions
security: convert to ctime accessor functions
apparmor: convert to ctime accessor functions
sunrpc: convert to ctime accessor functions
...
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/net/inet_sock.h
f866fbc842de ("ipv4: fix data-races around inet->inet_id")
c274af224269 ("inet: introduce inet->inet_flags")
https://lore.kernel.org/all/679ddff6-db6e-4ff6-b177-574e90d0103d@tessares.net/
Adjacent changes:
drivers/net/bonding/bond_alb.c
e74216b8def3 ("bonding: fix macvlan over alb bond support")
f11e5bd159b0 ("bonding: support balance-alb with openvswitch")
drivers/net/ethernet/broadcom/bgmac.c
d6499f0b7c7c ("net: bgmac: Return PTR_ERR() for fixed_phy_register()")
23a14488ea58 ("net: bgmac: Fix return value check for fixed_phy_register()")
drivers/net/ethernet/broadcom/genet/bcmmii.c
32bbe64a1386 ("net: bcmgenet: Fix return value check for fixed_phy_register()")
acf50d1adbf4 ("net: bcmgenet: Return PTR_ERR() for fixed_phy_register()")
net/sctp/socket.c
f866fbc842de ("ipv4: fix data-races around inet->inet_id")
b09bde5c3554 ("inet: move inet->mc_loop to inet->inet_frags")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the caller specifies the connect timeouts in the arguments to
rpc_clnt_add_xprt(), then we shouldn't override them.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
When we create a TCP transport, the connect timeout parameters are
currently fixed to be 90s. This is problematic in the pNFS flexfiles
case, where we may have multiple mirrors, and we would like to fail over
quickly to the next mirror if a data server is down.
This patch adds the ability to specify the connection parameters at RPC
client creation time.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Instead of requiring the requests to redrive the connection several
times, just let the TCP connect code manage it now that we've adjusted
the TCP_SYNCNT value.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Set the TCP SYN count so that we abort the connection attempt at around
the expected timeout value.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
rpcrdma_bc_post_recv() is never implemented since introduction in
commit f531a5dbc451 ("xprtrdma: Pre-allocate backward rpc_rqst and send/receive buffers").
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
If the pages are in HIGHMEM then we need to make sure they're mapped
before trying to read data off of them, otherwise we could end up with a
NULL pointer dereference.
The downside to this is that we need an extra cleanup step at the end of
decode to kunmap() the last page. I introduced an xdr_finish_decode()
function to do this. Right now this function only calls the
unmap_current_page() function, but other generic cleanup steps could be
added in the future if we come across anything else.
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Pull NFS client fixes from Trond Myklebust:
- fix a use after free in nfs_direct_join_group() (Cc: stable)
- fix sysfs server name memory leak
- fix lock recovery hang in NFSv4.0
- fix page free in the error path for nfs42_proc_getxattr() and
__nfs4_get_acl_uncached()
- SUNRPC/rdma: fix receive buffer dma-mapping after a server disconnect
* tag 'nfs-for-6.5-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
xprtrdma: Remap Receive buffers after a reconnect
NFSv4: fix out path in __nfs4_get_acl_uncached
NFSv4.2: fix error handling in nfs42_proc_getxattr
NFS: Fix sysfs server name memory leak
NFS: Fix a use after free in nfs_direct_join_group()
NFSv4: Fix dropped lock for racing OPEN and delegation return
|
|
On server-initiated disconnect, rpcrdma_xprt_disconnect() was DMA-
unmapping the Receive buffers, but rpcrdma_post_recvs() neglected
to remap them after a new connection had been established. The
result was immediate failure of the new connection with the Receives
flushing with LOCAL_PROT_ERR.
Fixes: 671c450b6fe0 ("xprtrdma: Fix oops in Receive handler after device removal")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/sfc/tc.c
fa165e194997 ("sfc: don't unregister flow_indr if it was never registered")
3bf969e88ada ("sfc: add MAE table machinery for conntrack table")
https://lore.kernel.org/all/20230818112159.7430e9b4@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
svc_tcp_sendmsg used to factor in the xdr->page_base when sending pages,
but commit 5df5dd03a8f7 ("sunrpc: Use sendmsg(MSG_SPLICE_PAGES) rather
then sendpage") dropped that part of the handling. Fix it by setting
the bv_offset of the first bvec.
Fixes: 5df5dd03a8f7 ("sunrpc: Use sendmsg(MSG_SPLICE_PAGES) rather then sendpage")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Use the helpers to parse the level and description fields in
incoming alerts. "Warning" alerts are discarded, and "fatal"
alerts mean the session is no longer valid.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/169047944747.5241.1974889594004407123.stgit@oracle-102.nfsv4bat.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before closing a TCP connection, the TLS protocol wants peers to
send session close Alert notifications. Add those in both the RPC
client and server.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/169047939404.5241.14392506226409865832.stgit@oracle-102.nfsv4bat.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kernel TLS consumers will need definitions of various parts of the
TLS protocol, but often do not need the function declarations and
other infrastructure provided in <net/tls.h>.
Break out existing standardized protocol elements into a separate
header, and make room for a few more elements in subsequent patches.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/169047931374.5241.7713175865185969309.stgit@oracle-102.nfsv4bat.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-86-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pull NFS client updates from Trond Myklebust:
"Stable fixes and other bugfixes:
- nfs: don't report STATX_BTIME in ->getattr
- Revert 'NFSv4: Retry LOCK on OLD_STATEID during delegation return'
since it breaks NFSv4 state recovery.
- NFSv4.1: freeze the session table upon receiving NFS4ERR_BADSESSION
- Fix the NFSv4.2 xattr cache shrinker_id
- Force a ctime update after a NFSv4.2 SETXATTR call
Features and cleanups:
- NFS and RPC over TLS client code from Chuck Lever
- Support for use of abstract unix socket addresses with the rpcbind
daemon
- Sysfs API to allow shutdown of the kernel RPC client and prevent
umount() hangs if the server is known to be permanently down
- XDR cleanups from Anna"
* tag 'nfs-for-6.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (33 commits)
Revert "NFSv4: Retry LOCK on OLD_STATEID during delegation return"
NFS: Don't cleanup sysfs superblock entry if uninitialized
nfs: don't report STATX_BTIME in ->getattr
NFSv4.1: freeze the session table upon receiving NFS4ERR_BADSESSION
NFSv4.2: fix wrong shrinker_id
NFSv4: Clean up some shutdown loops
NFS: Cancel all existing RPC tasks when shutdown
NFS: add sysfs shutdown knob
NFS: add a sysfs link to the acl rpc_client
NFS: add a sysfs link to the lockd rpc_client
NFS: Add sysfs links to sunrpc clients for nfs_clients
NFS: add superblock sysfs entries
NFS: Make all of /sys/fs/nfs network-namespace unique
NFS: Open-code the nfs_kset kset_create_and_add()
NFS: rename nfs_client_kobj to nfs_net_kobj
NFS: rename nfs_client_kset to nfs_kset
NFS: Add an "xprtsec=" NFS mount option
NFS: Have struct nfs_client carry a TLS policy field
SUNRPC: Add a TCP-with-TLS RPC transport class
SUNRPC: Capture CMSG metadata on client-side receive
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full
record
- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers:
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...
|
