summaryrefslogtreecommitdiff
path: root/net/tls
AgeCommit message (Collapse)AuthorFilesLines
2021-02-12net/tls: Select SOCK_RX_QUEUE_MAPPING from TLS_DEVICETariq Toukan1-0/+1
Compile-in the socket RX queue mapping field and logic when TLS_DEVICE is enabled. This allows device drivers to pick the recorded socket's RX queue and use it for streams distribution. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-19net/tls: Except bond interface from some TLS checksTariq Toukan2-1/+3
In the tls_dev_event handler, ignore tlsdev_ops requirement for bond interfaces, they do not exist as the interaction is done directly with the lower device. Also, make the validate function pass when it's called with the upper bond interface. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Boris Pismenny <borisp@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19net/tls: Device offload to use lowest netdevice in chainTariq Toukan1-1/+1
Do not call the tls_dev_ops of upper devices. Instead, ask them for the proper lowest device and communicate with it directly. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Boris Pismenny <borisp@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-15net: fix proc_fs init handling in af_packet and tlsYonatan Linik1-0/+3
proc_fs was used, in af_packet, without a surrounding #ifdef, although there is no hard dependency on proc_fs. That caused the initialization of the af_packet module to fail when CONFIG_PROC_FS=n. Specifically, proc_create_net() was used in af_packet.c, and when it fails, packet_net_init() returns -ENOMEM. It will always fail when the kernel is compiled without proc_fs, because, proc_create_net() for example always returns NULL. The calling order that starts in af_packet.c is as follows: packet_init() register_pernet_subsys() register_pernet_operations() __register_pernet_operations() ops_init() ops->init() (packet_net_ops.init=packet_net_init()) proc_create_net() It worked in the past because register_pernet_subsys()'s return value wasn't checked before this Commit 36096f2f4fa0 ("packet: Fix error path in packet_init."). It always returned an error, but was not checked before, so everything was working even when CONFIG_PROC_FS=n. The fix here is simply to add the necessary #ifdef. This also fixes a similar error in tls_proc.c, that was found by Jakub Kicinski. Fixes: d26b698dd3cd ("net/tls: add skeleton of MIB statistics") Fixes: 36096f2f4fa0 ("packet: Fix error path in packet_init") Signed-off-by: Yonatan Linik <yonatanlinik@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-02net/tls: make sure tls offload sets salt_sizeRohit Maheshwari1-1/+3
Recent changes made to remove AES constants started using protocol aware salt_size. ctx->prot_info's salt_size is filled in tls sw case, but not in tls offload mode, and was working so far because of the hard coded value was used. Fixes: 6942a284fb3e ("net/tls: make inline helpers protocol-aware") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Link: https://lore.kernel.org/r/20201201090752.27355-1-rohitm@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-1/+10
Trivial conflict in CAN, keep the net-next + the byteswap wrapper. Conflicts: drivers/net/can/usb/gs_usb.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-28net/tls: add CHACHA20-POLY1305 configurationVadim Fedorenko2-0/+19
Add ChaCha-Poly specific configuration code. Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-28net/tls: add CHACHA20-POLY1305 specific behaviorVadim Fedorenko1-2/+4
RFC 7905 defines special behavior for ChaCha-Poly TLS sessions. The differences are in the calculation of nonce and the absence of explicit IV. This behavior is like TLSv1.3 partly. Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-28net/tls: make inline helpers protocol-awareVadim Fedorenko3-14/+13
Inline functions defined in tls.h have a lot of AES-specific constants. Remove these constants and change argument to struct tls_prot_info to have an access to cipher type in later patches Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-26net/tls: Protect from calling tls_dev_del for TLS RX twiceMaxim Mikityanskiy1-1/+4
tls_device_offload_cleanup_rx doesn't clear tls_ctx->netdev after calling tls_dev_del if TLX TX offload is also enabled. Clearing tls_ctx->netdev gets postponed until tls_device_gc_task. It leaves a time frame when tls_device_down may get called and call tls_dev_del for RX one extra time, confusing the driver, which may lead to a crash. This patch corrects this racy behavior by adding a flag to prevent tls_device_down from calling tls_dev_del the second time. Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20201125221810.69870-1-saeedm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20net/tls: missing received data after fast remote closeVadim Fedorenko1-0/+6
In case when tcp socket received FIN after some data and the parser haven't started before reading data caller will receive an empty buffer. This behavior differs from plain TCP socket and leads to special treating in user-space. The flow that triggers the race is simple. Server sends small amount of data right after the connection is configured to use TLS and closes the connection. In this case receiver sees TLS Handshake data, configures TLS socket right after Change Cipher Spec record. While the configuration is in process, TCP socket receives small Application Data record, Encrypted Alert record and FIN packet. So the TCP socket changes sk_shutdown to RCV_SHUTDOWN and sk_flag with SK_DONE bit set. The received data is not parsed upon arrival and is never sent to user-space. Patch unpauses parser directly if we have unparsed data in tcp receive queue. Fixes: fcf4793e278e ("tls: check RCV_SHUTDOWN in tls_wait_data") Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Link: https://lore.kernel.org/r/1605801588-12236-1-git-send-email-vfedorenko@novek.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18net/tls: Fix wrong record sn in async mode of device resyncTariq Toukan1-10/+27
In async_resync mode, we log the TCP seq of records until the async request is completed. Later, in case one of the logged seqs matches the resync request, we return it, together with its record serial number. Before this fix, we mistakenly returned the serial number of the current record instead. Fixes: ed9b7646b06a ("net/tls: Add asynchronous resync") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Boris Pismenny <borisp@nvidia.com> Link: https://lore.kernel.org/r/20201115131448.2702-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net/tls: fix corrupted data in recvmsgVadim Fedorenko1-1/+1
If tcp socket has more data than Encrypted Handshake Message then tls_sw_recvmsg will try to decrypt next record instead of returning full control message to userspace as mentioned in comment. The next message - usually Application Data - gets corrupted because it uses zero copy for decryption that's why the data is not stored in skb for next iteration. Revert check to not decrypt next record if current is not Application Data. Fixes: 692d7b5d1f91 ("tls: Fix recvmsg() to be able to peek across multiple records") Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Link: https://lore.kernel.org/r/1605413760-21153-1-git-send-email-vfedorenko@novek.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-5/+6
Minor conflicts in net/mptcp/protocol.h and tools/testing/selftests/net/Makefile. In both cases code was added on both sides in the same place so just keep both. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-14net/tls: use semicolons rather than commas to separate statementsJulia Lawall1-1/+1
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1602412498-32025-6-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-10net/tls: sendfile fails with ktls offloadRohit Maheshwari1-5/+6
At first when sendpage gets called, if there is more data, 'more' in tls_push_data() gets set which later sets pending_open_record_frags, but when there is no more data in file left, and last time tls_push_data() gets called, pending_open_record_frags doesn't get reset. And later when 2 bytes of encrypted alert comes as sendmsg, it first checks for pending_open_record_frags, and since this is set, it creates a record with 0 data bytes to encrypt, meaning record length is prepend_size + tag_size only, which causes problem. We should set/reset pending_open_record_frags based on more bit. Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-2/+7
Rejecting non-native endian BTF overlapped with the addition of support for it. The rest were more simple overlapping changes, except the renesas ravb binding update, which had to follow a file move as well as a YAML conversion. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25net/tls: race causes kernel panicRohit Maheshwari1-2/+7
BUG: kernel NULL pointer dereference, address: 00000000000000b8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 80000008b6fef067 P4D 80000008b6fef067 PUD 8b6fe6067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 12 PID: 23871 Comm: kworker/12:80 Kdump: loaded Tainted: G S 5.9.0-rc3+ #1 Hardware name: Supermicro X10SRA-F/X10SRA-F, BIOS 2.1 03/29/2018 Workqueue: events tx_work_handler [tls] RIP: 0010:tx_work_handler+0x1b/0x70 [tls] Code: dc fe ff ff e8 16 d4 a3 f6 66 0f 1f 44 00 00 0f 1f 44 00 00 55 53 48 8b 6f 58 48 8b bd a0 04 00 00 48 85 ff 74 1c 48 8b 47 28 <48> 8b 90 b8 00 00 00 83 e2 02 75 0c f0 48 0f ba b0 b8 00 00 00 00 RSP: 0018:ffffa44ace61fe88 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff91da9e45cc30 RCX: dead000000000122 RDX: 0000000000000001 RSI: ffff91da9e45cc38 RDI: ffff91d95efac200 RBP: ffff91da133fd780 R08: 0000000000000000 R09: 000073746e657665 R10: 8080808080808080 R11: 0000000000000000 R12: ffff91dad7d30700 R13: ffff91dab6561080 R14: 0ffff91dad7d3070 R15: ffff91da9e45cc38 FS: 0000000000000000(0000) GS:ffff91dad7d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000b8 CR3: 0000000906478003 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: process_one_work+0x1a7/0x370 worker_thread+0x30/0x370 ? process_one_work+0x370/0x370 kthread+0x114/0x130 ? kthread_park+0x80/0x80 ret_from_fork+0x22/0x30 tls_sw_release_resources_tx() waits for encrypt_pending, which can have race, so we need similar changes as in commit 0cada33241d9de205522e3858b18e506ca5cce2c here as well. Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-01net/tls: Implement getsockopt SOL_TLS TLS_RXYutaro Hayakawa1-8/+17
Implement the getsockopt SOL_TLS TLS_RX which is currently missing. The primary usecase is to use it in conjunction with TCP_REPAIR to checkpoint/restore the TLS record layer state. TLS connection state usually exists on the user space library. So basically we can easily extract it from there, but when the TLS connections are delegated to the kTLS, it is not the case. We need to have a way to extract the TLS state from the kernel for both of TX and RX side. The new TLS_RX getsockopt copies the crypto_info to user in the same way as TLS_TX does. We have described use cases in our research work in Netdev 0x14 Transport Workshop [1]. Also, there is an TLS implementation called tlse [2] which supports TLS connection migration. They have support of kTLS and their code shows that they are expecting the future support of this option. [1] https://speakerdeck.com/yutarohayakawa/prism-proxies-without-the-pain [2] https://github.com/eduardsui/tlse Signed-off-by: Yutaro Hayakawa <yhayakawa3720@gmail.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-11net/tls: Fix kmap usageIra Weiny1-1/+2
When MSG_OOB is specified to tls_device_sendpage() the mapped page is never unmapped. Hold off mapping the page until after the flags are checked and the page is actually needed. Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-08net/tls: allow MSG_CMSG_COMPAT in sendmsgRouven Czerwinski1-1/+2
Trying to use ktls on a system with 32-bit userspace and 64-bit kernel results in a EOPNOTSUPP message during sendmsg: setsockopt(3, SOL_TLS, TLS_TX, …, 40) = 0 sendmsg(3, …, msg_flags=0}, 0) = -1 EOPNOTSUPP (Operation not supported) The tls_sw implementation does strict flag checking and does not allow the MSG_CMSG_COMPAT flag, which is set if the message comes in through the compat syscall. This patch adds MSG_CMSG_COMPAT to the flag check to allow the usage of the TLS SW implementation on systems using the compat syscall path. Note that the same check is present in the sendmsg path for the TLS device implementation, however the flag hasn't been added there for lack of testing hardware. Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds2-14/+63
Pull networking updates from David Miller: 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan. 2) Support UDP segmentation in code TSO code, from Eric Dumazet. 3) Allow flashing different flash images in cxgb4 driver, from Vishal Kulkarni. 4) Add drop frames counter and flow status to tc flower offloading, from Po Liu. 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni. 6) Various new indirect call avoidance, from Eric Dumazet and Brian Vazquez. 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from Yonghong Song. 8) Support querying and setting hardware address of a port function via devlink, use this in mlx5, from Parav Pandit. 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson. 10) Switch qca8k driver over to phylink, from Jonathan McDowell. 11) In bpftool, show list of processes holding BPF FD references to maps, programs, links, and btf objects. From Andrii Nakryiko. 12) Several conversions over to generic power management, from Vaibhav Gupta. 13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry Yakunin. 14) Various https url conversions, from Alexander A. Klimov. 15) Timestamping and PHC support for mscc PHY driver, from Antoine Tenart. 16) Support bpf iterating over tcp and udp sockets, from Yonghong Song. 17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov. 18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan. 19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several drivers. From Luc Van Oostenryck. 20) XDP support for xen-netfront, from Denis Kirjanov. 21) Support receive buffer autotuning in MPTCP, from Florian Westphal. 22) Support EF100 chip in sfc driver, from Edward Cree. 23) Add XDP support to mvpp2 driver, from Matteo Croce. 24) Support MPTCP in sock_diag, from Paolo Abeni. 25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic infrastructure, from Jakub Kicinski. 26) Several pci_ --> dma_ API conversions, from Christophe JAILLET. 27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel. 28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki. 29) Refactor a lot of networking socket option handling code in order to avoid set_fs() calls, from Christoph Hellwig. 30) Add rfc4884 support to icmp code, from Willem de Bruijn. 31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei. 32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin. 33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin. 34) Support TCP syncookies in MPTCP, from Flowian Westphal. 35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano Brivio. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits) net: thunderx: initialize VF's mailbox mutex before first usage usb: hso: remove bogus check for EINPROGRESS usb: hso: no complaint about kmalloc failure hso: fix bailout in error case of probe ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM selftests/net: relax cpu affinity requirement in msg_zerocopy test mptcp: be careful on subflow creation selftests: rtnetlink: make kci_test_encap() return sub-test result selftests: rtnetlink: correct the final return value for the test net: dsa: sja1105: use detected device id instead of DT one on mismatch tipc: set ub->ifindex for local ipv6 address ipv6: add ipv6_dev_find() net: openvswitch: silence suspicious RCU usage warning Revert "vxlan: fix tos value before xmit" ptp: only allow phase values lower than 1 period farsync: switch from 'pci_' to 'dma_' API wan: wanxl: switch from 'pci_' to 'dma_' API hv_netvsc: do not use VF device if link is down dpaa2-eth: Fix passing zero to 'PTR_ERR' warning net: macb: Properly handle phylink on at91sam9x ...
2020-07-28net: remove sockptr_advanceChristoph Hellwig1-3/+3
sockptr_advance never properly worked. Replace it with _offset variants of copy_from_sockptr and copy_to_sockptr. Fixes: ba423fdaa589 ("net: add a new sockptr_t type") Reported-by: Jason A. Donenfeld <Jason@zx2c4.com> Reported-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-25net: pass a sockptr_t into ->setsockoptChristoph Hellwig1-8/+9
Rework the remaining setsockopt code to pass a sockptr_t instead of a plain user pointer. This removes the last remaining set_fs(KERNEL_DS) outside of architecture specific code. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154] Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-16treewide: Remove uninitialized_var() usageKees Cook1-1/+1
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-28net/tls: Add asynchronous resyncBoris Pismenny1-0/+51
This patch adds support for asynchronous resynchronization in tls_device. Async resync follows two distinct stages: 1. The NIC driver indicates that it would like to resync on some TLS record within the received packet (P), but the driver does not know (yet) which of the TLS records within the packet. At this stage, the NIC driver will query the device to find the exact TCP sequence for resync (tcpsn), however, the driver does not wait for the device to provide the response. 2. Eventually, the device responds, and the driver provides the tcpsn within the resync packet to KTLS. Now, KTLS can check the tcpsn against any processed TLS records within packet P, and also against any record that is processed in the future within packet P. The asynchronous resync path simplifies the device driver, as it can save bits on the packet completion (32-bit TCP sequence), and pass this information on an asynchronous command instead. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-06-28Revert "net/tls: Add force_resync for driver resync"Boris Pismenny1-6/+3
This reverts commit b3ae2459f89773adcbf16fef4b68deaaa3be1929. Revert the force resync API. Not in use. To be replaced by a better async resync API downstream. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-06-13treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-1/+1
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-11Merge branch 'rwonce/rework' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux Pull READ/WRITE_ONCE rework from Will Deacon: "This the READ_ONCE rework I've been working on for a while, which bumps the minimum GCC version and improves code-gen on arm64 when stack protector is enabled" [ Side note: I'm _really_ tempted to raise the minimum gcc version to 4.9, so that we can just say that we require _Generic() support. That would allow us to more cleanly handle a lot of the cases where we depend on very complex macros with 'sizeof' or __builtin_choose_expr() with __builtin_types_compatible_p() etc. This branch has a workaround for sparse not handling _Generic(), either, but that was already fixed in the sparse development branch, so it's really just gcc-4.9 that we'd require. - Linus ] * 'rwonce/rework' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux: compiler_types.h: Use unoptimized __unqual_scalar_typeof for sparse compiler_types.h: Optimize __unqual_scalar_typeof compilation time compiler.h: Enforce that READ_ONCE_NOCHECK() access size is sizeof(long) compiler-types.h: Include naked type in __pick_integer_type() match READ_ONCE: Fix comment describing 2x32-bit atomicity gcov: Remove old GCC 3.4 support arm64: barrier: Use '__unqual_scalar_typeof' for acquire/release macros locking/barriers: Use '__unqual_scalar_typeof' for load-acquire macros READ_ONCE: Drop pointer qualifiers when reading from scalar types READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses READ_ONCE: Simplify implementations of {READ,WRITE}_ONCE() arm64: csum: Disable KASAN for do_csum() fault_inject: Don't rely on "return value" from WRITE_ONCE() net: tls: Avoid assigning 'const' pointer to non-const pointer netfilter: Avoid assigning 'const' pointer to non-const pointer compiler/gcc: Raise minimum GCC version for kernel builds to 4.8
2020-06-02bpf: Fix running sk_skb program types with ktlsJohn Fastabend1-2/+18
KTLS uses a stream parser to collect TLS messages and send them to the upper layer tls receive handler. This ensures the tls receiver has a full TLS header to parse when it is run. However, when a socket has BPF_SK_SKB_STREAM_VERDICT program attached before KTLS is enabled we end up with two stream parsers running on the same socket. The result is both try to run on the same socket. First the KTLS stream parser runs and calls read_sock() which will tcp_read_sock which in turn calls tcp_rcv_skb(). This dequeues the skb from the sk_receive_queue. When this is done KTLS code then data_ready() callback which because we stacked KTLS on top of the bpf stream verdict program has been replaced with sk_psock_start_strp(). This will in turn kick the stream parser again and eventually do the same thing KTLS did above calling into tcp_rcv_skb() and dequeuing a skb from the sk_receive_queue. At this point the data stream is broke. Part of the stream was handled by the KTLS side some other bytes may have been handled by the BPF side. Generally this results in either missing data or more likely a "Bad Message" complaint from the kTLS receive handler as the BPF program steals some bytes meant to be in a TLS header and/or the TLS header length is no longer correct. We've already broke the idealized model where we can stack ULPs in any order with generic callbacks on the TX side to handle this. So in this patch we do the same thing but for RX side. We add a sk_psock_strp_enabled() helper so TLS can learn a BPF verdict program is running and add a tls_sw_has_ctx_rx() helper so BPF side can learn there is a TLS ULP on the socket. Then on BPF side we omit calling our stream parser to avoid breaking the data stream for the KTLS receiver. Then on the KTLS side we call BPF_SK_SKB_STREAM_VERDICT once the KTLS receiver is done with the packet but before it posts the msg to userspace. This gives us symmetry between the TX and RX halfs and IMO makes it usable again. On the TX side we process packets in this order BPF -> TLS -> TCP and on the receive side in the reverse order TCP -> TLS -> BPF. Discovered while testing OpenSSL 3.0 Alpha2.0 release. Fixes: d829e9c4112b5 ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/159079361946.5745.605854335665044485.stgit@john-Precision-5820-Tower Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-06-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-6/+27
xdp_umem.c had overlapping changes between the 64-bit math fix for the calculation of npgs and the removal of the zerocopy memory type which got rid of the chunk_size_nohdr member. The mlx5 Kconfig conflict is a case where we just take the net-next copy of the Kconfig entry dependency as it takes on the ESWITCH dependency by one level of indirection which is what the 'net' conflicting change is trying to ensure. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net/tls: Add force_resync for driver resyncTariq Toukan1-3/+6
This patch adds a field to the tls rx offload context which enables drivers to force a send_resync call. This field can be used by drivers to request a resync at the next possible tls record. It is beneficial for hardware that provides the resync sequence number asynchronously. In such cases, the packet that triggered the resync does not contain the information required for a resync. Instead, the driver requests resync for all the following TLS record until the asynchronous notification with the resync request TCP sequence arrives. A following series for mlx5e ConnectX-6DX TLS RX offload support will use this mechanism. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26net/tls: fix race condition causing kernel panicVinay Kumar Yadav1-6/+27
tls_sw_recvmsg() and tls_decrypt_done() can be run concurrently. // tls_sw_recvmsg() if (atomic_read(&ctx->decrypt_pending)) crypto_wait_req(-EINPROGRESS, &ctx->async_wait); else reinit_completion(&ctx->async_wait.completion); //tls_decrypt_done() pending = atomic_dec_return(&ctx->decrypt_pending); if (!pending && READ_ONCE(ctx->async_notify)) complete(&ctx->async_wait.completion); Consider the scenario tls_decrypt_done() is about to run complete() if (!pending && READ_ONCE(ctx->async_notify)) and tls_sw_recvmsg() reads decrypt_pending == 0, does reinit_completion(), then tls_decrypt_done() runs complete(). This sequence of execution results in wrong completion. Consequently, for next decrypt request, it will not wait for completion, eventually on connection close, crypto resources freed, there is no way to handle pending decrypt response. This race condition can be avoided by having atomic_read() mutually exclusive with atomic_dec_return(),complete().Intoduced spin lock to ensure the mutual exclution. Addressed similar problem in tx direction. v1->v2: - More readable commit message. - Corrected the lock to fix new race scenario. - Removed barrier which is not needed now. Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22net/tls: free record only on encryption errorVadim Fedorenko1-2/+4
We cannot free record on any transient error because it leads to losing previos data. Check socket error to know whether record must be freed or not. Fixes: d10523d0b3d7 ("net/tls: free the record on encryption error") Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22net/tls: fix encryption error checkingVadim Fedorenko1-5/+6
bpf_exec_tx_verdict() can return negative value for copied variable. In that case this value will be pushed back to caller and the real error code will be lost. Fix it using signed type and checking for positive value. Fixes: d10523d0b3d7 ("net/tls: free the record on encryption error") Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling") Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-27net/tls: Fix sk_psock refcnt leak when in tls_data_ready()Xiyu Yang1-2/+3
tls_data_ready() invokes sk_psock_get(), which returns a reference of the specified sk_psock object to "psock" with increased refcnt. When tls_data_ready() returns, local variable "psock" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one exception handling path of tls_data_ready(). When "psock->ingress_msg" is empty but "psock" is not NULL, the function forgets to decrease the refcnt increased by sk_psock_get(), causing a refcnt leak. Fix this issue by calling sk_psock_put() on all paths when "psock" is not NULL. Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-27net/tls: Fix sk_psock refcnt leak in bpf_exec_tx_verdict()Xiyu Yang1-0/+2
bpf_exec_tx_verdict() invokes sk_psock_get(), which returns a reference of the specified sk_psock object to "psock" with increased refcnt. When bpf_exec_tx_verdict() returns, local variable "psock" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one exception handling path of bpf_exec_tx_verdict(). When "policy" equals to NULL but "psock" is not NULL, the function forgets to decrease the refcnt increased by sk_psock_get(), causing a refcnt leak. Fix this issue by calling sk_psock_put() on this error path before bpf_exec_tx_verdict() returns. Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-15net: tls: Avoid assigning 'const' pointer to non-const pointerWill Deacon1-1/+1
tls_build_proto() uses WRITE_ONCE() to assign a 'const' pointer to a 'non-const' pointer. Cleanups to the implementation of WRITE_ONCE() mean that this will give rise to a compiler warning, just like a plain old assignment would do: | net/tls/tls_main.c: In function ‘tls_build_proto’: | ./include/linux/compiler.h:229:30: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] | net/tls/tls_main.c:640:4: note: in expansion of macro ‘smp_store_release’ | 640 | smp_store_release(&saved_tcpv6_prot, prot); | | ^~~~~~~~~~~~~~~~~ Drop the const qualifier from the local 'prot' variable, as it isn't needed. Cc: Boris Pismenny <borisp@mellanox.com> Cc: Aviad Yehezkel <aviadye@mellanox.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Will Deacon <will@kernel.org>
2020-04-09net/tls: fix const assignment warningArnd Bergmann1-2/+2
Building with some experimental patches, I came across a warning in the tls code: include/linux/compiler.h:215:30: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 215 | *(volatile typeof(x) *)&(x) = (val); \ | ^ net/tls/tls_main.c:650:4: note: in expansion of macro 'smp_store_release' 650 | smp_store_release(&saved_tcpv4_prot, prot); This appears to be a legitimate warning about assigning a const pointer into the non-const 'saved_tcpv4_prot' global. Annotate both the ipv4 and ipv6 pointers 'const' to make the code internally consistent. Fixes: 5bb4c45d466c ("net/tls: Read sk_prot once when building tls proto ops") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22net/tls: Annotate access to sk_prot with READ_ONCE/WRITE_ONCEJakub Sitnicki2-5/+6
sockmap performs lockless writes to sk->sk_prot on the following paths: tcp_bpf_{recvmsg|sendmsg} / sock_map_unref sk_psock_put sk_psock_drop sk_psock_restore_proto WRITE_ONCE(sk->sk_prot, proto) To prevent load/store tearing [1], and to make tooling aware of intentional shared access [2], we need to annotate other sites that access sk_prot with READ_ONCE/WRITE_ONCE macros. Change done with Coccinelle with following semantic patch: @@ expression E; identifier I; struct sock *sk; identifier sk_prot =~ "^sk_prot$"; @@ ( E = -sk->sk_prot +READ_ONCE(sk->sk_prot) | -sk->sk_prot = E +WRITE_ONCE(sk->sk_prot, E) | -sk->sk_prot +READ_ONCE(sk->sk_prot) ->I ) Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22net/tls: Read sk_prot once when building tls proto opsJakub Sitnicki1-8/+9
Apart from being a "tremendous" win when it comes to generated machine code (see bloat-o-meter output for x86-64 below) this mainly prepares ground for annotating access to sk_prot with READ_ONCE, so that we don't pepper the code with access annotations and needlessly repeat loads. add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-46 (-46) Function old new delta tls_init 851 805 -46 Total: Before=21063, After=21017, chg -0.22% Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22net/tls: Constify base proto ops used for building tls protoJakub Sitnicki1-2/+2
The helper that builds kTLS proto ops doesn't need to and should not modify the base proto ops. Annotate the parameter as read-only. Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-1/+2
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-02-21 The following pull-request contains BPF updates for your *net-next* tree. We've added 25 non-merge commits during the last 4 day(s) which contain a total of 33 files changed, 2433 insertions(+), 161 deletions(-). The main changes are: 1) Allow for adding TCP listen sockets into sock_map/hash so they can be used with reuseport BPF programs, from Jakub Sitnicki. 2) Add a new bpf_program__set_attach_target() helper for adding libbpf support to specify the tracepoint/function dynamically, from Eelco Chaudron. 3) Add bpf_read_branch_records() BPF helper which helps use cases like profile guided optimizations, from Daniel Xu. 4) Enable bpf_perf_event_read_value() in all tracing programs, from Song Liu. 5) Relax BTF mandatory check if only used for libbpf itself e.g. to process BTF defined maps, from Andrii Nakryiko. 6) Move BPF selftests -mcpu compilation attribute from 'probe' to 'v3' as it has been observed that former fails in envs with low memlock, from Yonghong Song. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-22net, sk_msg: Annotate lockless access to sk_prot on cloneJakub Sitnicki1-1/+2
sk_msg and ULP frameworks override protocol callbacks pointer in sk->sk_prot, while tcp accesses it locklessly when cloning the listening socket, that is with neither sk_lock nor sk_callback_lock held. Once we enable use of listening sockets with sockmap (and hence sk_msg), there will be shared access to sk->sk_prot if socket is getting cloned while being inserted/deleted to/from the sockmap from another CPU: Read side: tcp_v4_rcv sk = __inet_lookup_skb(...) tcp_check_req(sk) inet_csk(sk)->icsk_af_ops->syn_recv_sock tcp_v4_syn_recv_sock tcp_create_openreq_child inet_csk_clone_lock sk_clone_lock READ_ONCE(sk->sk_prot) Write side: sock_map_ops->map_update_elem sock_map_update_elem sock_map_update_common sock_map_link_no_progs tcp_bpf_init tcp_bpf_update_sk_prot sk_psock_update_proto WRITE_ONCE(sk->sk_prot, ops) sock_map_ops->map_delete_elem sock_map_delete_elem __sock_map_delete sock_map_unref sk_psock_put sk_psock_drop sk_psock_restore_proto tcp_update_ulp WRITE_ONCE(sk->sk_prot, proto) Mark the shared access with READ_ONCE/WRITE_ONCE annotations. Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200218171023.844439-2-jakub@cloudflare.com
2020-02-20net/tls: Fix to avoid gettig invalid tls recordRohit Maheshwari1-1/+19
Current code doesn't check if tcp sequence number is starting from (/after) 1st record's start sequnce number. It only checks if seq number is before 1st record's end sequnce number. This problem will always be a possibility in re-transmit case. If a record which belongs to a requested seq number is already deleted, tls_get_record will start looking into list and as per the check it will look if seq number is before the end seq of 1st record, which will always be true and will return 1st record always, it should in fact return NULL. As part of the fix, start looking each record only if the sequence number lies in the list else return NULL. There is one more check added, driver look for the start marker record to handle tcp packets which are before the tls offload start sequence number, hence return 1st record if the record is tls start marker and seq number is before the 1st record's starting sequence number. Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-12/+39
2020-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller2-7/+34
Daniel Borkmann says: ==================== pull-request: bpf 2020-01-15 The following pull-request contains BPF updates for your *net* tree. We've added 12 non-merge commits during the last 9 day(s) which contain a total of 13 files changed, 95 insertions(+), 43 deletions(-). The main changes are: 1) Fix refcount leak for TCP time wait and request sockets for socket lookup related BPF helpers, from Lorenz Bauer. 2) Fix wrong verification of ARSH instruction under ALU32, from Daniel Borkmann. 3) Batch of several sockmap and related TLS fixes found while operating more complex BPF programs with Cilium and OpenSSL, from John Fastabend. 4) Fix sockmap to read psock's ingress_msg queue before regular sk_receive_queue() to avoid purging data upon teardown, from Lingpeng Chen. 5) Fix printing incorrect pointer in bpftool's btf_dump_ptr() in order to properly dump a BPF map's value with BTF, from Martin KaFai Lau. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-16bpf: Sockmap/tls, fix pop data with SK_DROP return codeJohn Fastabend1-4/+1
When user returns SK_DROP we need to reset the number of copied bytes to indicate to the user the bytes were dropped and not sent. If we don't reset the copied arg sendmsg will return as if those bytes were copied giving the user a positive return value. This works as expected today except in the case where the user also pops bytes. In the pop case the sg.size is reduced but we don't correctly account for this when copied bytes is reset. The popped bytes are not accounted for and we return a small positive value potentially confusing the user. The reason this happens is due to a typo where we do the wrong comparison when accounting for pop bytes. In this fix notice the if/else is not needed and that we have a similar problem if we push data except its not visible to the user because if delta is larger the sg.size we return a negative value so it appears as an error regardless. Fixes: 7246d8ed4dcce ("bpf: helper to pop data from messages") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/bpf/20200111061206.8028-9-john.fastabend@gmail.com
2020-01-16bpf: Sockmap/tls, skmsg can have wrapped skmsg that needs extra chainingJohn Fastabend1-0/+6
Its possible through a set of push, pop, apply helper calls to construct a skmsg, which is just a ring of scatterlist elements, with the start value larger than the end value. For example, end start |_0_|_1_| ... |_n_|_n+1_| Where end points at 1 and start points and n so that valid elements is the set {n, n+1, 0, 1}. Currently, because we don't build the correct chain only {n, n+1} will be sent. This adds a check and sg_chain call to correctly submit the above to the crypto and tls send path. Fixes: d3b18ad31f93d ("tls: add bpf support to sk_msg handling") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/bpf/20200111061206.8028-8-john.fastabend@gmail.com
2020-01-16bpf: Sockmap/tls, tls_sw can create a plaintext buf > encrypt bufJohn Fastabend1-0/+20
It is possible to build a plaintext buffer using push helper that is larger than the allocated encrypt buffer. When this record is pushed to crypto layers this can result in a NULL pointer dereference because the crypto API expects the encrypt buffer is large enough to fit the plaintext buffer. Kernel splat below. To resolve catch the cases this can happen and split the buffer into two records to send individually. Unfortunately, there is still one case to handle where the split creates a zero sized buffer. In this case we merge the buffers and unmark the split. This happens when apply is zero and user pushed data beyond encrypt buffer. This fixes the original case as well because the split allocated an encrypt buffer larger than the plaintext buffer and the merge simply moves the pointers around so we now have a reference to the new (larger) encrypt buffer. Perhaps its not ideal but it seems the best solution for a fixes branch and avoids handling these two cases, (a) apply that needs split and (b) non apply case. The are edge cases anyways so optimizing them seems not necessary unless someone wants later in next branches. [ 306.719107] BUG: kernel NULL pointer dereference, address: 0000000000000008 [...] [ 306.747260] RIP: 0010:scatterwalk_copychunks+0x12f/0x1b0 [...] [ 306.770350] Call Trace: [ 306.770956] scatterwalk_map_and_copy+0x6c/0x80 [ 306.772026] gcm_enc_copy_hash+0x4b/0x50 [ 306.772925] gcm_hash_crypt_remain_continue+0xef/0x110 [ 306.774138] gcm_hash_crypt_continue+0xa1/0xb0 [ 306.775103] ? gcm_hash_crypt_continue+0xa1/0xb0 [ 306.776103] gcm_hash_assoc_remain_continue+0x94/0xa0 [ 306.777170] gcm_hash_assoc_continue+0x9d/0xb0 [ 306.778239] gcm_hash_init_continue+0x8f/0xa0 [ 306.779121] gcm_hash+0x73/0x80 [ 306.779762] gcm_encrypt_continue+0x6d/0x80 [ 306.780582] crypto_gcm_encrypt+0xcb/0xe0 [ 306.781474] crypto_aead_encrypt+0x1f/0x30 [ 306.782353] tls_push_record+0x3b9/0xb20 [tls] [ 306.783314] ? sk_psock_msg_verdict+0x199/0x300 [ 306.784287] bpf_exec_tx_verdict+0x3f2/0x680 [tls] [ 306.785357] tls_sw_sendmsg+0x4a3/0x6a0 [tls] test_sockmap test signature to trigger bug, [TEST]: (1, 1, 1, sendmsg, pass,redir,start 1,end 2,pop (1,2),ktls,): Fixes: d3b18ad31f93d ("tls: add bpf support to sk_msg handling") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/bpf/20200111061206.8028-7-john.fastabend@gmail.com