summaryrefslogtreecommitdiff
path: root/net/wireless/core.c
AgeCommit message (Collapse)AuthorFilesLines
2021-04-08cfg80211: allow specifying a reason for hw_rfkillEmmanuel Grumbach1-3/+4
rfkill now allows to report a reason for the hw_rfkill state. Allow cfg80211 drivers to specify this reason. Keep the current API to use the default reason (RFKILL_HARD_BLOCK_SIGNAL). Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://lore.kernel.org/r/20210322204633.102581-4-emmanuel.grumbach@intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-08net: remove the new_ifindex argument from dev_change_net_namespaceAndrei Vagin1-2/+2
Here is only one place where we want to specify new_ifindex. In all other cases, callers pass 0 as new_ifindex. It looks reasonable to add a low-level function with new_ifindex and to convert dev_change_net_namespace to a static inline wrapper. Fixes: eeb85a14ee34 ("net: Allow to specify ifindex when device is moved to another namespace") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Andrei Vagin <avagin@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-06net: Allow to specify ifindex when device is moved to another namespaceAndrei Vagin1-2/+2
Currently, we can specify ifindex on link creation. This change allows to specify ifindex when a device is moved to another network namespace. Even now, a device ifindex can be changed if there is another device with the same ifindex in the target namespace. So this change doesn't introduce completely new behavior, it adds more control to the process. CRIU users want to restore containers with pre-created network devices. A user will provide network devices and instructions where they have to be restored, then CRIU will restore network namespaces and move devices into them. The problem is that devices have to be restored with the same indexes that they have before C/R. Cc: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com> Suggested-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Andrei Vagin <avagin@gmail.com> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-01cfg80211: fix netdev registration deadlockJohannes Berg1-1/+3
If register_netdevice() fails after having called cfg80211's netdev notifier (cfg80211_netdev_notifier_call) it will call the notifier again with UNREGISTER. This would then lock the wiphy mutex because we're marked as registered, which causes a deadlock. Fix this by separately keeping track of whether or not we're in the middle of registering to also skip the notifier call on this unregister. Reported-by: syzbot+2ae0ca9d7737ad1a62b7@syzkaller.appspotmail.com Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Link: https://lore.kernel.org/r/20210201192048.ed8bad436737.I7cae042c44b15f80919a285799a15df467e9d42d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-28cfg80211: call cfg80211_destroy_ifaces() with wiphy lock heldJohannes Berg1-0/+3
This is needed since it calls into the driver, which must have the same context as if we got to destroy an interface through nl80211. Fix this, and add a direct lockdep assertion so we don't see it pop up only when the driver calls back to cfg80211. Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Reported-by: syzbot+4305e814f9b267131776@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20210128183454.d31df9cbd7ce.I1beb07c9492f0ade900e864a098c57041e7a7ebf@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-26cfg80211: avoid holding the RTNL when calling the driverJohannes Berg1-10/+36
Currently, _everything_ in cfg80211 holds the RTNL, and if you have a slow USB device (or a few) you can get some bad lock contention on that. Fix that by re-adding a mutex to each wiphy/rdev as we had at some point, so we have locking for the wireless_dev lists and all the other things in there, and also so that drivers still don't have to worry too much about it (they still won't get parallel calls for a single device). Then, we can restrict the RTNL to a few cases where we add or remove interfaces and really need the added protection. Some of the global list management still also uses the RTNL, since we need to have it anyway for netdev management, but we only hold the RTNL for very short periods of time here. Link: https://lore.kernel.org/r/20210122161942.81df9f5e047a.I4a8e1a60b18863ea8c5e6d3a0faeafb2d45b2f40@changeid Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> [marvell driver issues] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-22cfg80211: change netdev registration/unregistration semanticsJohannes Berg1-48/+71
We used to not require anything in terms of registering netdevs with cfg80211, using a netdev notifier instead. However, in the next patch reducing RTNL locking, this causes big problems, and the simplest way is to just require drivers to do things better. Change the registration/unregistration semantics to require the drivers to call cfg80211_(un)register_netdevice() when this is happening due to a cfg80211 request, i.e. add_virtual_intf() or del_virtual_intf() (or if it somehow has to happen in any other cfg80211 callback). Otherwise, in other contexts, drivers may continue to use the normal netdev (un)registration functions as usual. Internally, we still use the netdev notifier and track (by the new wdev->registered bool) if the wdev had already been added to cfg80211 or not. Link: https://lore.kernel.org/r/20210122161942.cf2f4b65e4e9.Ida8234e50da13eb675b557bac52a713ad4eddf71@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-11-13Merge tag 'mac80211-next-for-net-next-2020-11-13' of ↵Jakub Kicinski1-7/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Some updates: * injection/radiotap updates for new test capabilities * remove WDS support - even years ago when we turned it off by default it was already basically unusable * support for HE (802.11ax) rates for beacons * support for some vendor-specific HE rates * many other small features/cleanups * tag 'mac80211-next-for-net-next-2020-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (21 commits) nl80211: fix kernel-doc warning in the new SAE attribute cfg80211: remove WDS code mac80211: remove WDS-related code rt2x00: remove WDS code b43legacy: remove WDS code b43: remove WDS code carl9170: remove WDS code ath9k: remove WDS code wireless: remove CONFIG_WIRELESS_WDS mac80211: assure that certain drivers adhere to DONT_REORDER flag mac80211: don't overwrite QoS TID of injected frames mac80211: adhere to Tx control flag that prevents frame reordering mac80211: add radiotap flag to assure frames are not reordered mac80211: save HE oper info in BSS config for mesh cfg80211: add support to configure HE MCS for beacon rate nl80211: fix beacon tx rate mask validation nl80211/cfg80211: fix potential infinite loop cfg80211: Add support to calculate and report 4096-QAM HE rates cfg80211: Add support to configure SAE PWE value to drivers ieee80211: Add definition for WFA DPP ... ==================== Link: https://lore.kernel.org/r/20201113101148.25268-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11cfg80211: remove WDS codeJohannes Berg1-7/+1
Remove all the code that was there to configure WDS interfaces, now that there's no way to reach it anymore. Link: https://lore.kernel.org/r/20201109105103.8f5b98e4068d.I5f5129041649ef2862b69683574bb3344743727b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-30cfg80211: initialize wdev data earlierJohannes Berg1-26/+31
There's a race condition in the netdev registration in that NETDEV_REGISTER actually happens after the netdev is available, and so if we initialize things only there, we might get called with an uninitialized wdev through nl80211 - not using a wdev but using a netdev interface index. I found this while looking into a syzbot report, but it doesn't really seem to be related, and unfortunately there's no repro for it (yet). I can't (yet) explain how it managed to get into cfg80211_release_pmsr() from nl80211_netlink_notify() without the wdev having been initialized, as the latter only iterates the wdevs that are linked into the rdev, which even without the change here happened after init. However, looking at this, it seems fairly clear that the init needs to be done earlier, otherwise we might even re-init on a netns move, when data might still be pending. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20201009135821.fdcbba3aad65.Ie9201d91dbcb7da32318812effdc1561aeaf4cdc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28nl80211/cfg80211: support 6 GHz scanningTova Mussai1-2/+6
Support 6 GHz scanning, by * a new scan flag to scan for colocated BSSes advertised by (and found) APs on 2.4 & 5 GHz * doing the necessary reduced neighbor report parsing for this, to find them * adding the ability to split the scan request in case the device by itself cannot support this. Also add some necessary bits in mac80211 to not break with these changes. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200918113313.232917c93af9.Ida22f0212f9122f47094d81659e879a50434a6a2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-07mm, treewide: rename kzfree() to kfree_sensitive()Waiman Long1-1/+1
As said by Linus: A symmetric naming is only helpful if it implies symmetries in use. Otherwise it's actively misleading. In "kzalloc()", the z is meaningful and an important part of what the caller wants. In "kzfree()", the z is actively detrimental, because maybe in the future we really _might_ want to use that "memfill(0xdeadbeef)" or something. The "zero" part of the interface isn't even _relevant_. The main reason that kzfree() exists is to clear sensitive information that should not be leaked to other future users of the same memory objects. Rename kzfree() to kfree_sensitive() to follow the example of the recently added kvfree_sensitive() and make the intention of the API more explicit. In addition, memzero_explicit() is used to clear the memory to make sure that it won't get optimized away by the compiler. The renaming is done by using the command sequence: git grep -w --name-only kzfree |\ xargs sed -i 's/kzfree/kfree_sensitive/' followed by some editing of the kfree_sensitive() kerneldoc and adding a kzfree backward compatibility macro in slab.h. [akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h] [akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more] Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Joe Perches <joe@perches.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-31nl80211: S1G band and channel definitionsThomas Pedersen1-2/+3
Gives drivers the definitions needed to advertise support for S1G bands. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200602062247.23212-1-thomas@adapt-ip.com Link: https://lore.kernel.org/r/20200731055636.795173-1-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-06-05cfg80211: fix management registrations deadlockJohannes Berg1-3/+3
Lockdep reports that we may deadlock because we take the RTNL on the work struct, but flush it under RTNL. Clearly, it's correct. In practice, this can happen when doing rfkill on an active device. Fix this by moving the work struct to the wiphy (registered dev) layer, and iterate over all the wdevs inside there. This then means we need to track which one of them has work to do, so we don't update to the driver for all wdevs all the time. Also fix a locking bug I noticed while working on this - the registrations list is iterated as if it was an RCU list, but it isn't handle that way - and we need to lock now for the update flag anyway, so remove the RCU. Fixes: 6cd536fe62ef ("cfg80211: change internal management frame registration API") Reported-by: Markus Theil <markus.theil@tu-ilmenau.de> Reported-and-tested-by: Kenneth R. Crudup <kenny@panix.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200604120420.b1dc540a7e26.I55dcca56bb5bdc5d7ad66a36a0b42afd7034d8be@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-06-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+1
xdp_umem.c had overlapping changes between the 64-bit math fix for the calculation of npgs and the removal of the zerocopy memory type which got rid of the chunk_size_nohdr member. The mlx5 Kconfig conflict is a case where we just take the net-next copy of the Kconfig entry dependency as it takes on the ESWITCH dependency by one level of indirection which is what the 'net' conflicting change is trying to ensure. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-31cfg80211: require HE capabilities for 6 GHz bandJohannes Berg1-0/+10
On 6 GHz band, HE capabilities must be available for all of the interface types, otherwise we shouldn't use 6 GHz. Check this. Link: https://lore.kernel.org/r/20200528213443.5881cb3c8c4a.I583b54172f91f98d44af64a16c5826fe458cbb27@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31cfg80211: reject HT/VHT capabilities on 6 GHz bandJohannes Berg1-1/+6
On the 6 GHz band, HE should be used, but without any direct HT/VHT capabilities, instead the HE 6 GHz band capabilities will capture the relevant information. Reject HT/VHT capabilities here. Link: https://lore.kernel.org/r/20200528213443.bfe89c35459a.Ibba5e066fa0087fd49d13cfee89d196ea0c68ae2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-25cfg80211: fix debugfs rename crashJohannes Berg1-1/+1
Removing the "if (IS_ERR(dir)) dir = NULL;" check only works if we adjust the remaining code to not rely on it being NULL. Check IS_ERR_OR_NULL() before attempting to dereference it. I'm not actually entirely sure this fixes the syzbot crash as the kernel config indicates that they do have DEBUG_FS in the kernel, but this is what I found when looking there. Cc: stable@vger.kernel.org Fixes: d82574a8e5a4 ("cfg80211: no need to check return value of debugfs_create functions") Reported-by: syzbot+fd5332e429401bf42d18@syzkaller.appspotmail.com Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20200525113816.fc4da3ec3d4b.Ica63a110679819eaa9fb3bc1b7437d96b1fd187d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24cfg80211: reject channels/chandefs with KHz offset >= 1000Johannes Berg1-0/+3
This should be covered by the next MHz, make sure that the numbers are always normalized. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200424120103.12b91ecf75f9.I4bf499d58404283bbfacb517d614a816763bccf2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24cfg80211: change internal management frame registration APIJohannes Berg1-4/+3
Almost all drivers below cfg80211 get the API wrong (except for cfg80211) and are unable to cope with multiple registrations for the same frame type, which is valid due to the match filter. This seems to indicate the API is wrong, and we should maintain the full information in cfg80211 instead of the drivers. Change the API to no longer inform the driver about individual registrations and unregistrations, but rather every time about the entire state of the entire wiphy and single wdev, whenever it may have changed. This also simplifies the code in cfg80211 as it no longer has to track exactly what was unregistered and can free things immediately. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200417124300.f47f3828afc8.I7f81ef59c2c5a340d7075fb3c6d0e08e8aeffe07@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-20nl80211/cfg80211: add support for non EDCA based ranging measurementAvraham Stern1-0/+6
Add support for requesting that the ranging measurement will use the trigger-based / non trigger-based flow instead of the EDCA based flow. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-2-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-12-13cfg80211: fix double-free after changing network namespaceStefan Bühler1-0/+1
If wdev->wext.keys was initialized it didn't get reset to NULL on unregister (and it doesn't get set in cfg80211_init_wdev either), but wdev is reused if unregister was triggered through cfg80211_switch_netns. The next unregister (for whatever reason) will try to free wdev->wext.keys again. Signed-off-by: Stefan Bühler <source@stbuehler.de> Link: https://lore.kernel.org/r/20191126100543.782023-1-stefan.buehler@tik.uni-stuttgart.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-09-11cfg80211: always shut down on HW rfkillJohannes Berg1-6/+7
When the RFKILL subsystem isn't available, then rfkill_blocked() always returns false. In the case of hardware rfkill this will be wrong though, as if the hardware reported being killed then it cannot operate any longer. Since we only ever call the rfkill_sync work in this case, just rename it to rfkill_block and always pass "true" for the blocked parameter, rather than passing rfkill_blocked(). We rely on the underlying driver to still reject any new attempt to bring up the device by itself. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20190830112451.21655-2-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-4/+2
Just minor overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-26{nl,mac}80211: fix interface combinations on crypto controlled devicesManikanta Pubbisetty1-4/+2
Commit 33d915d9e8ce ("{nl,mac}80211: allow 4addr AP operation on crypto controlled devices") has introduced a change which allows 4addr operation on crypto controlled devices (ex: ath10k). This change has inadvertently impacted the interface combinations logic on such devices. General rule is that software interfaces like AP/VLAN should not be listed under supported interface combinations and should not be considered during validation of these combinations; because of the aforementioned change, AP/VLAN interfaces(if present) will be checked against interfaces supported by the device and blocks valid interface combinations. Consider a case where an AP and AP/VLAN are up and running; when a second AP device is brought up on the same physical device, this AP will be checked against the AP/VLAN interface (which will not be part of supported interface combinations of the device) and blocks second AP to come up. Add a new API cfg80211_iftype_allowed() to fix the problem, this API works for all devices with/without SW crypto control. Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Fixes: 33d915d9e8ce ("{nl,mac}80211: allow 4addr AP operation on crypto controlled devices") Link: https://lore.kernel.org/r/1563779690-9716-1-git-send-email-mpubbise@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-26cfg80211: no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-11/+6
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20190703070142.GA29993@kroah.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+6
Honestly all the conflicts were simple overlapping changes, nothing really interesting to report. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14Merge tag 'mac80211-for-davem-2019-06-14' of ↵David S. Miller1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Various fixes, all over: * a few memory leaks * fixes for management frame protection security and A2/A3 confusion (affecting TDLS as well) * build fix for certificates * etc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14cfg80211: fix memory leak of wiphy device nameEric Biggers1-1/+1
In wiphy_new_nm(), if an error occurs after dev_set_name() and device_initialize() have already been called, it's necessary to call put_device() (via wiphy_free()) to avoid a memory leak. Reported-by: syzbot+7fddca22578bc67c3fe4@syzkaller.appspotmail.com Fixes: 1f87f7d3a3b4 ("cfg80211: add rfkill support") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14nl80211: require and validate vendor command policyJohannes Berg1-0/+13
Require that each vendor command give a policy of its sub-attributes in NL80211_ATTR_VENDOR_DATA, and then (stricly) check the contents, including the NLA_F_NESTED flag that we couldn't check on the outer layer because there we don't know yet. It is possible to use VENDOR_CMD_RAW_DATA for raw data, but then no nested data can be given (NLA_F_NESTED flag must be clear) and the data is just passed as is to the command. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-05-24{nl,mac}80211: allow 4addr AP operation on crypto controlled devicesManikanta Pubbisetty1-1/+5
As per the current design, in the case of sw crypto controlled devices, it is the device which advertises the support for AP/VLAN iftype based on it's ability to tranmsit packets encrypted in software (In VLAN functionality, group traffic generated for a specific VLAN group is always encrypted in software). Commit db3bdcb9c3ff ("mac80211: allow AP_VLAN operation on crypto controlled devices") has introduced this change. Since 4addr AP operation also uses AP/VLAN iftype, this conditional way of advertising AP/VLAN support has broken 4addr AP mode operation on crypto controlled devices which do not support VLAN functionality. In the case of ath10k driver, not all firmwares have support for VLAN functionality but all can support 4addr AP operation. Because AP/VLAN support is not advertised for these devices, 4addr AP operations are also blocked. Fix this by allowing 4addr operation on devices which do not support AP/VLAN iftype but can support 4addr AP operation (decision is based on the wiphy flag WIPHY_FLAG_4ADDR_AP). Cc: stable@vger.kernel.org Fixes: db3bdcb9c3ff ("mac80211: allow AP_VLAN operation on crypto controlled devices") Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner1-0/+1
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-06cfg80211: pmsr: fix abort lockingJohannes Berg1-0/+2
When we destroy the interface we already hold the wdev->mtx while calling cfg80211_pmsr_wdev_down(), which assumes this isn't true and flushes the worker that takes the lock, thus leading to a deadlock. Fix this by refactoring the worker and calling its code in cfg80211_pmsr_wdev_down() directly. We still need to flush the work later to make sure it's not still running and will crash, but it will not do anything. Fixes: 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-11-09nl80211: announce radios/interfaces when switching namespacesMartin Willi1-0/+14
When a wiphy changes its namespace, all interfaces are moved to the new namespace as well. The network interfaces are properly announced as leaving on the old and as appearing on the new namespace through RTM_NEWLINK/RTM_DELLINK. On nl80211, however, these events are missing for radios and their interfaces. Add netlink announcements through nl80211 when switching namespaces, so userspace can rely on these events to discover radios properly. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-11-09cfg80211: add peer measurement with FTM initiator APIJohannes Berg1-0/+34
Add a new "peer measurement" API, that can be used to measure certain things related to a peer. Right now, only implement FTM (flight time measurement) over it, but the idea is that it'll be extensible to also support measuring the necessary things to calculate e.g. angle-of-arrival for WiGig. The API is structured to have a generic list of peers and channels to measure with/on, and then for each of those a set of measurements (again, only FTM right now) to perform. Results are sent to the requesting socket, including a final complete message. Closing the controlling netlink socket will abort a running measurement. v3: - add a bit to report "final" for partial results - remove list keeping etc. and just unicast out the results to the requester (big code reduction ...) - also send complete message unicast, and as a result remove the multicast group - separate out struct cfg80211_pmsr_ftm_request_peer from struct cfg80211_pmsr_request_peer - document timeout == 0 if no timeout - disallow setting timeout nl80211 attribute to 0, must not include attribute for no timeout - make MAC address randomization optional - change num bursts exponent default to 0 (1 burst, rather rather than the old default of 15==don't care) v4: - clarify NL80211_ATTR_TIMEOUT documentation v5: - remove unnecessary nl80211 multicast/family changes - remove partial results bit/flag, final is sufficient - add max_bursts_exponent, max_ftms_per_burst to capability - rename "frames per burst" -> "FTMs per burst" v6: - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down() and call it in leave, so the device can't go down with any pending measurements v7: - wording fixes (Lior) - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior) v8: - copyright statements - minor coding style fixes - fix error path leak Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02cfg80211: unify sending NL80211_CMD_NEW_INTERFACEJohannes Berg1-2/+3
There isn't really any need for us to be sending this from two different places - move cfg80211_init_wdev() later and send the notification from there, removing it from the non- netdev case. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02cfg80211: combine wdev/netdev unregister codeJohannes Berg1-17/+21
We currently have two places that do similar things, depending on whether it's a wdev with or without netdev. Combine the code to avoid having to duplicate all new additions. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02cfg80211: combine duplicate wdev init codeJohannes Berg1-17/+23
There's a bit of duplicated code to initialize a wdev, pull it out into a separate function to call from both places. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02cfg80211: remove unnecessary null pointer check in cfg80211_netdev_notifier_callzhong jiang1-1/+1
The iterator in list_for_each_entry_safe is never null, therefore, remove the redundant null pointer check. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-06-30Merge tag 'mac80211-next-for-davem-2018-06-29' of ↵David S. Miller1-1/+20
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Small merge conflict in net/mac80211/scan.c, I preserved the kcalloc() conversion. -DaveM Johannes Berg says: ==================== This round's updates: * finally some of the promised HE code, but it turns out to be small - but everything kept changing, so one part I did in the driver was >30 patches for what was ultimately <200 lines of code ... similar here for this code. * improved scan privacy support - can now specify scan flags for randomizing the sequence number as well as reducing the probe request element content * rfkill cleanups * a timekeeping cleanup from Arnd * various other cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-15cfg80211: Add support for HELuca Coelho1-1/+20
Add support for the HE in cfg80211 and also add userspace API to nl80211 to send rate information out, conforming with P802.11ax_D2.0. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2018-06-15cfg80211: fix rcu in cfg80211_unregister_wdevDedy Lansky1-0/+1
Callers of cfg80211_unregister_wdev can free the wdev object immediately after this function returns. This may crash the kernel because this wdev object is still in use by other threads. Add synchronize_rcu() after list_del_rcu to make sure wdev object can be safely freed. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2018-05-23nl80211: Update ERP info using NL80211_CMD_UPDATE_CONNECT_PARAMSVidyullatha Kanchanapally1-0/+4
Use NL80211_CMD_UPDATE_CONNECT_PARAMS to update new ERP information, Association IEs and the Authentication type to driver / firmware which will be used in subsequent roamings. Signed-off-by: Vidyullatha Kanchanapally <vidyullatha@codeaurora.org> [arend: extended fils-sk kernel doc and added check in wiphy_register()] Reviewed-by: Jithu Jance <jithu.jance@broadcom.com> Reviewed-by: Eylon Pedinovsky <eylon.pedinovsky@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-04-19cfg80211: limit wiphy names to 128 bytesJohannes Berg1-0/+3
There's currently no limit on wiphy names, other than netlink message size and memory limitations, but that causes issues when, for example, the wiphy name is used in a uevent, e.g. in rfkill where we use the same name for the rfkill instance, and then the buffer there is "only" 2k for the environment variables. This was reported by syzkaller, which used a 4k name. Limit the name to something reasonable, I randomly picked 128. Reported-by: syzbot+230d9e642a85d3fec29c@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-01-15cfg80211: check dev_set_name() return valueJohannes Berg1-1/+7
syzbot reported a warning from rfkill_alloc(), and after a while I think that the reason is that it was doing fault injection and the dev_set_name() failed, leaving the name NULL, and we didn't check the return value and got to rfkill_alloc() with a NULL name. Since we really don't want a NULL name, we ought to check the return value. Fixes: fb28ad35906a ("net: struct device - replace bus_id with dev_name(), dev_set_name()") Reported-by: syzbot+1ddfb3357e1d7bb5b5d3@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-10-11cfg80211: support loading regulatory database as firmware fileJohannes Berg1-1/+1
As the current regulatory database is only about 4k big, and already difficult to extend, we decided that overall it would be better to get rid of the complications with CRDA and load the database into the kernel directly, but in a new format that is extensible. The new file format can be extended since it carries a length field on all the structs that need to be extensible. In order to be able to request firmware when the module initializes, move cfg80211 from subsys_initcall() to the later fs_initcall(); the firmware loader is at the same level but linked earlier, so it can be called from there. Otherwise, when both the firmware loader and cfg80211 are built-in, the request will crash the kernel. We also need to be before device_initcall() so that cfg80211 is available for devices when they initialize. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-13cfg80211: support 4-way handshake offloading for 802.1XAvraham Stern1-0/+5
Add API for setting the PMK to the driver. For FT support, allow setting also the PMK-R0 Name. This can be used by drivers that support 4-Way handshake offload while IEEE802.1X authentication is managed by upper layers. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> [arend.vanspriel@broadcom.com: add WANT_1X_4WAY_HS attribute] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> [reword NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X docs a bit to say that the device may require it] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28cfg80211: add request id to cfg80211_sched_scan_*() apiArend Van Spriel1-1/+1
Have proper request id filled in the SCHED_SCAN_RESULTS and SCHED_SCAN_STOPPED notifications toward user-space by having the driver provide it through the api. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-27nl80211: allow multiple active scheduled scan requestsArend Van Spriel1-12/+17
This patch implements the idea to have multiple scheduled scan requests running concurrently. It mainly illustrates how to deal with the incoming request from user-space in terms of backward compatibility. In order to use multiple scheduled scans user-space needs to provide a flag attribute NL80211_ATTR_SCHED_SCAN_MULTI to indicate support. If not the request is treated as a legacy scan. Drivers currently supporting scheduled scan are now indicating they support a single scheduled scan request. This obsoletes WIPHY_FLAG_SUPPORTS_SCHED_SCAN. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> [clean up netlink destroy path to avoid allocations, code cleanups] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-27cfg80211: simplify netlink socket owner interface deletionJohannes Berg1-22/+4
There's no need to allocate a portid structure and then, for each of those, walk the interfaces - we can just add a flag to each interface and walk those directly. Due to padding in the struct, we can even do it without any memory cost, and it even simplifies the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-14 11:56:39 +0300