Age | Commit message (Collapse) | Author | Files | Lines |
|
[ Upstream commit 89a2aefe4b084686c2ffc1ee939585111ea4fc0f ]
xfrm_policy_kill() is called at different places to delete xfrm
policy. It will call xfrm_pol_put(). But xfrm_dev_policy_delete() is
not called to free the policy offloaded to hardware.
The three commits cited here are to handle this issue by calling
xfrm_dev_policy_delete() outside xfrm_get_policy(). But they didn't
cover all the cases. An example, which is not handled for now, is
xfrm_policy_insert(). It is called when XFRM_MSG_UPDPOLICY request is
received. Old policy is replaced by new one, but the offloaded policy
is not deleted, so driver doesn't have the chance to release hardware
resources.
To resolve this issue for all cases, move xfrm_dev_policy_delete()
into xfrm_policy_kill(), so the offloaded policy can be deleted from
hardware when it is called, which avoids hardware resources leakage.
Fixes: 919e43fad516 ("xfrm: add an interface to offload policy")
Fixes: bf06fcf4be0f ("xfrm: add missed call to delete offloaded policies")
Fixes: 982c3aca8bac ("xfrm: delete offloaded policy")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
__dst_negative_advice() does not enforce proper RCU rules when
sk->dst_cache must be cleared, leading to possible UAF.
RCU rules are that we must first clear sk->sk_dst_cache,
then call dst_release(old_dst).
Note that sk_dst_reset(sk) is implementing this protocol correctly,
while __dst_negative_advice() uses the wrong order.
Given that ip6_negative_advice() has special logic
against RTF_CACHE, this means each of the three ->negative_advice()
existing methods must perform the sk_dst_reset() themselves.
Note the check against NULL dst is centralized in
__dst_negative_advice(), there is no need to duplicate
it in various callbacks.
Many thanks to Clement Lecigne for tracking this issue.
This old bug became visible after the blamed commit, using UDP sockets.
Fixes: a87cb3e48ee8 ("net: Facility to report route quality of connected sockets")
Reported-by: Clement Lecigne <clecigne@google.com>
Diagnosed-by: Clement Lecigne <clecigne@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240528114353.1794151-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
35d92abfbad8 ("net: hns3: fix kernel crash when devlink reload during initialization")
2a1a1a7b5fd7 ("net: hns3: add command queue trace for hns3")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2024-05-03
1) Remove Obsolete UDP_ENCAP_ESPINUDP_NON_IKE Support.
This was defined by an early version of an IETF draft
that did not make it to a standard.
2) Introduce direction attribute for xfrm states.
xfrm states have a direction, a stsate can be used
either for input or output packet processing.
Add a direction to xfrm states to make it clear
for what a xfrm state is used.
* tag 'ipsec-next-2024-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: Restrict SA direction attribute to specific netlink message types
xfrm: Add dir validation to "in" data path lookup
xfrm: Add dir validation to "out" data path lookup
xfrm: Add Direction to the SA in or out
udpencap: Remove Obsolete UDP_ENCAP_ESPINUDP_NON_IKE Support
====================
Link: https://lore.kernel.org/r/20240503082732.2835810-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduces validation for the x->dir attribute within the XFRM output
data lookup path. If the configured direction does not match the expected
direction, output, increment the XfrmOutStateDirError counter and drop
the packet to ensure data integrity and correct flow handling.
grep -vw 0 /proc/net/xfrm_stat
XfrmOutPolError 1
XfrmOutStateDirError 1
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Instead of (struct rt6_info *)dst casts, we can use :
#define dst_rt6_info(_ptr) \
container_of_const(_ptr, struct rt6_info, dst)
Some places needed missing const qualifiers :
ip6_confirm_neigh(), ipv6_anycast_destination(),
ipv6_unicast_destination(), has_gateway()
v2: added missing parts (David Ahern)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix derferencing pointer when xfrm_policy_lookup_bytype returns an
error.
Fixes: 63b21caba17e ("xfrm: introduce forwarding of ICMP Error messages")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/kernel-janitors/f6ef0d0d-96de-4e01-9dc3-c1b3a6338653@moroto.mountain/
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
1) Introduce forwarding of ICMP Error messages. That is specified
in RFC 4301 but was never implemented. From Antony Antony.
2) Use KMEM_CACHE instead of kmem_cache_create in xfrm6_tunnel_init()
and xfrm_policy_init(). From Kunwu Chan.
3) Do not allocate stats in the xfrm interface driver, this can be done
on net core now. From Breno Leitao.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In current code, xfrm_bundle_create() always uses the matched
SA's family type to look up a xfrm child route for the skb.
The route returned by xfrm_dst_lookup() will eventually be
used in xfrm_output_resume() (skb_dst(skb)->ops->local_out()).
If packet offload is used, the above behavior can lead to
calling ip_local_out() for an IPv6 packet or calling
ip6_local_out() for an IPv4 packet, which is likely to fail.
This change fixes the behavior by checking if the matched SA
has packet offload enabled. If not, keep the same behavior;
if yes, use the matched SP's family type for the lookup.
Test: verified IPv6-in-IPv4 packets on Android device with
IPsec packet offload enabled
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
commit 0a31bd5f2bbb ("KMEM_CACHE(): simplify slab cache creation")
introduces a new macro.
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This commit aligns with RFC 4301, Section 6, and addresses the
requirement to forward unauthenticated ICMP error messages that do not
match any xfrm policies. It utilizes the ICMP payload as an skb and
performs a reverse lookup. If a policy match is found, forward
the packet.
The ICMP payload typically contains a partial IP packet that is likely
responsible for the error message.
The following error types will be forwarded:
- IPv4 ICMP error types: ICMP_DEST_UNREACH & ICMP_TIME_EXCEEDED
- IPv6 ICMPv6 error types: ICMPV6_DEST_UNREACH, ICMPV6_PKT_TOOBIG,
ICMPV6_TIME_EXCEED
To implement this feature, a reverse lookup has been added to the xfrm
forward path, making use of the ICMP payload as the skb.
To enable this functionality from user space, the XFRM_POLICY_ICMP flag
should be added to the outgoing and forward policies, and the
XFRM_STATE_ICMP flag should be set on incoming states.
e.g.
ip xfrm policy add flag icmp tmpl
ip xfrm policy
src 192.0.2.0/24 dst 192.0.1.0/25
dir out priority 2084302 ptype main flag icmp
ip xfrm state add ...flag icmp
ip xfrm state
root@west:~#ip x s
src 192.1.2.23 dst 192.1.2.45
proto esp spi 0xa7b76872 reqid 16389 mode tunnel
replay-window 32 flag icmp af-unspec
Changes since v5:
- fix return values bool->int, feedback from Steffen
Changes since v4:
- split the series to only ICMP erorr forwarding
Changes since v3: no code chage
- add missing white spaces detected by checkpatch.pl
Changes since v2: reviewed by Steffen Klassert
- user consume_skb instead of kfree_skb for the inner skb
- fixed newskb leaks in error paths
- free the newskb once inner flow is decoded with change due to
commit 7a0207094f1b ("xfrm: policy: replace session decode with flow dissector")
- if xfrm_decode_session_reverse() on inner payload fails ignore.
do not increment error counter
Changes since v1:
- Move IPv6 variable declaration inside IS_ENABLED(CONFIG_IPV6)
Changes since RFC:
- Fix calculation of ICMPv6 header length
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Commit 23e7b1bfed61 ("xfrm: Don't accidentally set RTO_ONLINK in
decode_session4()") fixed a problem where decode_session4() could
erroneously set the RTO_ONLINK flag for IPv4 route lookups. This
problem was reintroduced when decode_session4() was modified to
use the flow dissector.
Fix this by clearing again the two low order bits of ->flowi4_tos.
Found by code inspection, compile tested only.
Fixes: 7a0207094f1b ("xfrm: policy: replace session decode with flow dissector")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This commit adds an unstable kfunc helper to access internal xfrm_state
associated with an SA. This is intended to be used for the upcoming
IPsec pcpu work to assign special pcpu SAs to a particular CPU. In other
words: for custom software RSS.
That being said, the function that this kfunc wraps is fairly generic
and used for a lot of xfrm tasks. I'm sure people will find uses
elsewhere over time.
This commit also adds a corresponding bpf_xdp_xfrm_state_release() kfunc
to release the refcnt acquired by bpf_xdp_get_xfrm_state(). The verifier
will require that all acquired xfrm_state's are released.
Co-developed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/a29699c42f5fad456b875c98dd11c6afc3ffb707.1702593901.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2023-10-28
1) Remove unused function declarations of xfrm4_extract_input and
xfrm6_extract_input. From Yue Haibing.
2) Annotate struct xfrm_sec_ctx with __counted_by.
From Kees Cook.
3) Support GRO decapsulation for ESP in UDP encapsulation.
From Antony Antony et all.
4) Replace the xfrm session decode with flow dissector.
From Florian Westphal.
5) Fix a use after free in __xfrm6_udp_encap_rcv.
6) Fix the layer 4 flowi decoding.
From Florian Westphal.
* tag 'ipsec-next-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: policy: fix layer 4 flowi decoding
xfrm Fix use after free in __xfrm6_udp_encap_rcv.
xfrm: policy: replace session decode with flow dissector
xfrm: move mark and oif flowi decode into common code
xfrm: pass struct net to xfrm_decode_session wrappers
xfrm: Support GRO for IPv6 ESP in UDP encapsulation
xfrm: Support GRO for IPv4 ESP in UDP encapsulation
xfrm: Use the XFRM_GRO to indicate a GRO call on input
xfrm: Annotate struct xfrm_sec_ctx with __counted_by
xfrm: Remove unused function declarations
====================
Link: https://lore.kernel.org/r/20231028084328.3119236-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The commit shipped with two bugs:
fl4->fl4_icmp_type = flkeys->icmp.type;
fl4->fl4_icmp_type = flkeys->icmp.code;
~~~~ should have been "code".
But the more severe bug is that I got fooled by flowi member defines:
fl4_icmp_type, fl4_gre_key and fl4_dport share the same union/address.
Fix typo and make gre/icmp key setting depend on the l4 protocol.
Fixes: 7a0207094f1b ("xfrm: policy: replace session decode with flow dissector")
Reported-and-tested-by: Antony Antony <antony@phenome.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Cross-merge networking fixes after downstream PR.
net/mac80211/key.c
02e0e426a2fb ("wifi: mac80211: fix error path key leak")
2a8b665e6bcc ("wifi: mac80211: remove key_mtx")
7d6904bf26b9 ("Merge wireless into wireless-next")
https://lore.kernel.org/all/20231012113648.46eea5ec@canb.auug.org.au/
Adjacent changes:
drivers/net/ethernet/ti/Kconfig
a602ee3176a8 ("net: ethernet: ti: Fix mixed module-builtin object")
98bdeae9502b ("net: cpmac: remove driver to prepare for platform removal")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot complains about a race in xfrm_lookup_with_ifid() [1]
When preparing commit 0a9e5794b21e ("xfrm: annotate data-race
around use_time") I thought xfrm_lookup_with_ifid() was modifying
a still private structure.
[1]
BUG: KCSAN: data-race in xfrm_lookup_with_ifid / xfrm_lookup_with_ifid
write to 0xffff88813ea41108 of 8 bytes by task 8150 on cpu 1:
xfrm_lookup_with_ifid+0xce7/0x12d0 net/xfrm/xfrm_policy.c:3218
xfrm_lookup net/xfrm/xfrm_policy.c:3270 [inline]
xfrm_lookup_route+0x3b/0x100 net/xfrm/xfrm_policy.c:3281
ip6_dst_lookup_flow+0x98/0xc0 net/ipv6/ip6_output.c:1246
send6+0x241/0x3c0 drivers/net/wireguard/socket.c:139
wg_socket_send_skb_to_peer+0xbd/0x130 drivers/net/wireguard/socket.c:178
wg_socket_send_buffer_to_peer+0xd6/0x100 drivers/net/wireguard/socket.c:200
wg_packet_send_handshake_initiation drivers/net/wireguard/send.c:40 [inline]
wg_packet_handshake_send_worker+0x10c/0x150 drivers/net/wireguard/send.c:51
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2703
worker_thread+0x525/0x730 kernel/workqueue.c:2784
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
write to 0xffff88813ea41108 of 8 bytes by task 15867 on cpu 0:
xfrm_lookup_with_ifid+0xce7/0x12d0 net/xfrm/xfrm_policy.c:3218
xfrm_lookup net/xfrm/xfrm_policy.c:3270 [inline]
xfrm_lookup_route+0x3b/0x100 net/xfrm/xfrm_policy.c:3281
ip6_dst_lookup_flow+0x98/0xc0 net/ipv6/ip6_output.c:1246
send6+0x241/0x3c0 drivers/net/wireguard/socket.c:139
wg_socket_send_skb_to_peer+0xbd/0x130 drivers/net/wireguard/socket.c:178
wg_socket_send_buffer_to_peer+0xd6/0x100 drivers/net/wireguard/socket.c:200
wg_packet_send_handshake_initiation drivers/net/wireguard/send.c:40 [inline]
wg_packet_handshake_send_worker+0x10c/0x150 drivers/net/wireguard/send.c:51
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2703
worker_thread+0x525/0x730 kernel/workqueue.c:2784
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
value changed: 0x00000000651cd9d1 -> 0x00000000651cd9d2
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 15867 Comm: kworker/u4:58 Not tainted 6.6.0-rc4-syzkaller-00016-g5e62ed3b1c8a #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/06/2023
Workqueue: wg-kex-wg2 wg_packet_handshake_send_worker
Fixes: 0a9e5794b21e ("xfrm: annotate data-race around use_time")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
xfrm needs to populate ipv4/v6 flow struct for route lookup.
In the past there were several bugs in this code:
1. callers that forget to reload header pointers after
xfrm_decode_session() (it may pull headers).
2. bugs in decoding where accesses past skb->data occurred.
Meanwhile network core gained a packet dissector as well.
This switches xfrm to the flow dissector.
Changes since RFC:
Drop ipv6 mobiliy header support, AFAIU noone uses this.
Drop extraction of flowlabel, replaced code doesn't set it either.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/netdev/20230908120628.26164-3-fw@strlen.de/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
flowi4_oif/flowi6_oif and mark are aliased to flowi_common field, i.e.
all can be used interchangeably.
Instead of duplicating place this in common code.
No functional changes intended.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Preparation patch, extra arg is not used.
No functional changes intended.
This is needed to replace the xfrm session decode functions with
the flow dissector.
skb_flow_dissect() cannot be used as-is, because it attempts to deduce the
'struct net' to use for bpf program fetch from skb->sk or skb->dev, but
xfrm code path can see skbs that have neither sk or dev filled in.
So either flow dissector needs to try harder, e.g. by also trying
skb->dst->dev, or we have to pass the struct net explicitly.
Passing the struct net doesn't look too bad to me, most places
already have it available or can derive it from the output device.
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/netdev/202309271628.27fd2187-oliver.sang@intel.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
xfrm_gen_index() mutual exclusion uses net->xfrm.xfrm_policy_lock.
This means we must use a per-netns idx_generator variable,
instead of a static one.
Alternative would be to use an atomic variable.
syzbot reported:
BUG: KCSAN: data-race in xfrm_sk_policy_insert / xfrm_sk_policy_insert
write to 0xffffffff87005938 of 4 bytes by task 29466 on cpu 0:
xfrm_gen_index net/xfrm/xfrm_policy.c:1385 [inline]
xfrm_sk_policy_insert+0x262/0x640 net/xfrm/xfrm_policy.c:2347
xfrm_user_policy+0x413/0x540 net/xfrm/xfrm_state.c:2639
do_ipv6_setsockopt+0x1317/0x2ce0 net/ipv6/ipv6_sockglue.c:943
ipv6_setsockopt+0x57/0x130 net/ipv6/ipv6_sockglue.c:1012
rawv6_setsockopt+0x21e/0x410 net/ipv6/raw.c:1054
sock_common_setsockopt+0x61/0x70 net/core/sock.c:3697
__sys_setsockopt+0x1c9/0x230 net/socket.c:2263
__do_sys_setsockopt net/socket.c:2274 [inline]
__se_sys_setsockopt net/socket.c:2271 [inline]
__x64_sys_setsockopt+0x66/0x80 net/socket.c:2271
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffffffff87005938 of 4 bytes by task 29460 on cpu 1:
xfrm_sk_policy_insert+0x13e/0x640
xfrm_user_policy+0x413/0x540 net/xfrm/xfrm_state.c:2639
do_ipv6_setsockopt+0x1317/0x2ce0 net/ipv6/ipv6_sockglue.c:943
ipv6_setsockopt+0x57/0x130 net/ipv6/ipv6_sockglue.c:1012
rawv6_setsockopt+0x21e/0x410 net/ipv6/raw.c:1054
sock_common_setsockopt+0x61/0x70 net/core/sock.c:3697
__sys_setsockopt+0x1c9/0x230 net/socket.c:2263
__do_sys_setsockopt net/socket.c:2274 [inline]
__se_sys_setsockopt net/socket.c:2271 [inline]
__x64_sys_setsockopt+0x66/0x80 net/socket.c:2271
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x00006ad8 -> 0x00006b18
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 29460 Comm: syz-executor.1 Not tainted 6.5.0-rc5-syzkaller-00243-g9106536c1aa3 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
Fixes: 1121994c803f ("netns xfrm: policy insertion in netns")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Since commit 1202cdd66531("Remove DECnet support from kernel") has been
merged, all callers pass in the initial_ref value of 1 when they call
dst_alloc(). Therefore, remove initial_ref when the dst_alloc() is
declared and replace initial_ref with 1 in dst_alloc().
Also when all callers call dst_init(), the value of initial_ref is 1.
Therefore, remove the input parameter initial_ref of the dst_init() and
replace initial_ref with the value 1 in dst_init.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20230911125045.346390-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
BUG: KASAN: slab-use-after-free in xfrm_policy_inexact_list_reinsert+0xb6/0x430
Read of size 1 at addr ffff8881051f3bf8 by task ip/668
CPU: 2 PID: 668 Comm: ip Not tainted 6.5.0-rc5-00182-g25aa0bebba72-dirty #64
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x72/0xa0
print_report+0xd0/0x620
kasan_report+0xb6/0xf0
xfrm_policy_inexact_list_reinsert+0xb6/0x430
xfrm_policy_inexact_insert_node.constprop.0+0x537/0x800
xfrm_policy_inexact_alloc_chain+0x23f/0x320
xfrm_policy_inexact_insert+0x6b/0x590
xfrm_policy_insert+0x3b1/0x480
xfrm_add_policy+0x23c/0x3c0
xfrm_user_rcv_msg+0x2d0/0x510
netlink_rcv_skb+0x10d/0x2d0
xfrm_netlink_rcv+0x49/0x60
netlink_unicast+0x3fe/0x540
netlink_sendmsg+0x528/0x970
sock_sendmsg+0x14a/0x160
____sys_sendmsg+0x4fc/0x580
___sys_sendmsg+0xef/0x160
__sys_sendmsg+0xf7/0x1b0
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x73/0xdd
The root cause is:
cpu 0 cpu1
xfrm_dump_policy
xfrm_policy_walk
list_move_tail
xfrm_add_policy
... ...
xfrm_policy_inexact_list_reinsert
list_for_each_entry_reverse
if (!policy->bydst_reinsert)
//read non-existent policy
xfrm_dump_policy_done
xfrm_policy_walk_done
list_del(&walk->walk.all);
If dump_one_policy() returns err (triggered by netlink socket),
xfrm_policy_walk() will move walk initialized by socket to list
net->xfrm.policy_all. so this socket becomes visible in the global
policy list. The head *walk can be traversed when users add policies
with different prefixlen and trigger xfrm_policy node merge.
The issue can also be triggered by policy list traversal while rehashing
and flushing policies.
It can be fixed by skip such "policies" with walk.dead set to 1.
Fixes: 9cf545ebd591 ("xfrm: policy: store inexact policies in a tree ordered by destination address")
Fixes: 12a169e7d8f4 ("ipsec: Put dumpers on the dump list")
Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
sk->sk_mark is often read while another thread could change the value.
Fixes: 4a19ec5800fc ("[NET]: Introducing socket mark socket option.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Offloaded policies are deleted through two flows: netdev is going
down and policy flush.
In both cases, the code lacks relevant call to delete offloaded policy.
Fixes: 919e43fad516 ("xfrm: add an interface to offload policy")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This change allows inbound traffic through nested IPsec tunnels to
successfully match policies and templates, while retaining the secpath
stack trace as necessary for netfilter policies.
Specifically, this patch marks secpath entries that have already matched
against a relevant policy as having been verified, allowing it to be
treated as optional and skipped after a tunnel decapsulation (during
which the src/dst/proto/etc may have changed, and the correct policy
chain no long be resolvable).
This approach is taken as opposed to the iteration in b0355dbbf13c,
where the secpath was cleared, since that breaks subsequent validations
that rely on the existence of the secpath entries (netfilter policies, or
transport-in-tunnel mode, where policies remain resolvable).
Fixes: b0355dbbf13c ("Fix XFRM-I support for nested ESP tunnels")
Test: Tested against Android Kernel Unit Tests
Test: Tested against Android CTS
Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This change ensures that if configured in the policy, the if_id set in
the policy and secpath states match during the inbound policy check.
Without this, there is potential for ambiguity where entries in the
secpath differing by only the if_id could be mismatched.
Notably, this is checked in the outbound direction when resolving
templates to SAs, but not on the inbound path when matching SAs and
policies.
Test: Tested against Android kernel unit tests & CTS
Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This reverts commit b0355dbbf13c0052931dd14c38c789efed64d3de.
The reverted commit clears the secpath on packets received via xfrm interfaces
to support nested IPsec tunnels. This breaks Netfilter policy matching using
xt_policy in the FORWARD chain, as the secpath is missing during forwarding.
Additionally, Benedict Wong reports that it breaks Transport-in-Tunnel mode.
Fix this regression by reverting the commit until we have a better approach
for nested IPsec tunnels.
Fixes: b0355dbbf13c ("Fix XFRM-I support for nested ESP tunnels")
Link: https://lore.kernel.org/netdev/20230412085615.124791-1-martin@strongswan.org/
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The current code doesn't let a simple "allow" policy counteract a
default policy blocking all incoming packets:
ip x p setdefault in block
ip x p a src 192.168.2.1/32 dst 192.168.2.2/32 dir in action allow
At this stage, we have an allow policy (with or without transforms)
for this packet. It doesn't matter what the default policy says, since
the policy we looked up lets the packet through. The case of a
blocking policy is already handled separately, so we can remove this
check.
Fixes: 2d151d39073a ("xfrm: Add possibility to set the default to block if we have no policy")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
KCSAN reported multiple cpus can update use_time
at the same time.
Adds READ_ONCE()/WRITE_ONCE() annotations.
Note that 32bit arches are not fully protected,
but they will probably no longer be supported/used in 2106.
BUG: KCSAN: data-race in __xfrm_policy_check / __xfrm_policy_check
write to 0xffff88813e7ec108 of 8 bytes by interrupt on cpu 0:
__xfrm_policy_check+0x6ae/0x17f0 net/xfrm/xfrm_policy.c:3664
__xfrm_policy_check2 include/net/xfrm.h:1174 [inline]
xfrm_policy_check include/net/xfrm.h:1179 [inline]
xfrm6_policy_check+0x2e9/0x320 include/net/xfrm.h:1189
udpv6_queue_rcv_one_skb+0x48/0xa30 net/ipv6/udp.c:703
udpv6_queue_rcv_skb+0x2d6/0x310 net/ipv6/udp.c:792
udp6_unicast_rcv_skb+0x16b/0x190 net/ipv6/udp.c:935
__udp6_lib_rcv+0x84b/0x9b0 net/ipv6/udp.c:1020
udpv6_rcv+0x4b/0x50 net/ipv6/udp.c:1133
ip6_protocol_deliver_rcu+0x99e/0x1020 net/ipv6/ip6_input.c:439
ip6_input_finish net/ipv6/ip6_input.c:484 [inline]
NF_HOOK include/linux/netfilter.h:302 [inline]
ip6_input+0xca/0x180 net/ipv6/ip6_input.c:493
dst_input include/net/dst.h:454 [inline]
ip6_rcv_finish+0x1e9/0x2d0 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:302 [inline]
ipv6_rcv+0x85/0x140 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core net/core/dev.c:5482 [inline]
__netif_receive_skb+0x8b/0x1b0 net/core/dev.c:5596
process_backlog+0x23f/0x3b0 net/core/dev.c:5924
__napi_poll+0x65/0x390 net/core/dev.c:6485
napi_poll net/core/dev.c:6552 [inline]
net_rx_action+0x37e/0x730 net/core/dev.c:6663
__do_softirq+0xf2/0x2c7 kernel/softirq.c:571
do_softirq+0xb1/0xf0 kernel/softirq.c:472
__local_bh_enable_ip+0x6f/0x80 kernel/softirq.c:396
__raw_read_unlock_bh include/linux/rwlock_api_smp.h:257 [inline]
_raw_read_unlock_bh+0x17/0x20 kernel/locking/spinlock.c:284
wg_socket_send_skb_to_peer+0x107/0x120 drivers/net/wireguard/socket.c:184
wg_packet_create_data_done drivers/net/wireguard/send.c:251 [inline]
wg_packet_tx_worker+0x142/0x360 drivers/net/wireguard/send.c:276
process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
worker_thread+0x618/0xa70 kernel/workqueue.c:2436
kthread+0x1a9/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
write to 0xffff88813e7ec108 of 8 bytes by interrupt on cpu 1:
__xfrm_policy_check+0x6ae/0x17f0 net/xfrm/xfrm_policy.c:3664
__xfrm_policy_check2 include/net/xfrm.h:1174 [inline]
xfrm_policy_check include/net/xfrm.h:1179 [inline]
xfrm6_policy_check+0x2e9/0x320 include/net/xfrm.h:1189
udpv6_queue_rcv_one_skb+0x48/0xa30 net/ipv6/udp.c:703
udpv6_queue_rcv_skb+0x2d6/0x310 net/ipv6/udp.c:792
udp6_unicast_rcv_skb+0x16b/0x190 net/ipv6/udp.c:935
__udp6_lib_rcv+0x84b/0x9b0 net/ipv6/udp.c:1020
udpv6_rcv+0x4b/0x50 net/ipv6/udp.c:1133
ip6_protocol_deliver_rcu+0x99e/0x1020 net/ipv6/ip6_input.c:439
ip6_input_finish net/ipv6/ip6_input.c:484 [inline]
NF_HOOK include/linux/netfilter.h:302 [inline]
ip6_input+0xca/0x180 net/ipv6/ip6_input.c:493
dst_input include/net/dst.h:454 [inline]
ip6_rcv_finish+0x1e9/0x2d0 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:302 [inline]
ipv6_rcv+0x85/0x140 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core net/core/dev.c:5482 [inline]
__netif_receive_skb+0x8b/0x1b0 net/core/dev.c:5596
process_backlog+0x23f/0x3b0 net/core/dev.c:5924
__napi_poll+0x65/0x390 net/core/dev.c:6485
napi_poll net/core/dev.c:6552 [inline]
net_rx_action+0x37e/0x730 net/core/dev.c:6663
__do_softirq+0xf2/0x2c7 kernel/softirq.c:571
do_softirq+0xb1/0xf0 kernel/softirq.c:472
__local_bh_enable_ip+0x6f/0x80 kernel/softirq.c:396
__raw_read_unlock_bh include/linux/rwlock_api_smp.h:257 [inline]
_raw_read_unlock_bh+0x17/0x20 kernel/locking/spinlock.c:284
wg_socket_send_skb_to_peer+0x107/0x120 drivers/net/wireguard/socket.c:184
wg_packet_create_data_done drivers/net/wireguard/send.c:251 [inline]
wg_packet_tx_worker+0x142/0x360 drivers/net/wireguard/send.c:276
process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
worker_thread+0x618/0xa70 kernel/workqueue.c:2436
kthread+0x1a9/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
value changed: 0x0000000063c62d6f -> 0x0000000063c62d70
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 4185 Comm: kworker/1:2 Tainted: G W 6.2.0-rc4-syzkaller-00009-gd532dd102151-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Workqueue: wg-crypt-wg0 wg_packet_tx_worker
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This change adds support for nested IPsec tunnels by ensuring that
XFRM-I verifies existing policies before decapsulating a subsequent
policies. Addtionally, this clears the secpath entries after policies
are verified, ensuring that previous tunnels with no-longer-valid
do not pollute subsequent policy checks.
This is necessary especially for nested tunnels, as the IP addresses,
protocol and ports may all change, thus not matching the previous
policies. In order to ensure that packets match the relevant inbound
templates, the xfrm_policy_check should be done before handing off to
the inner XFRM protocol to decrypt and decapsulate.
Notably, raw ESP/AH packets did not perform policy checks inherently,
whereas all other encapsulated packets (UDP, TCP encapsulated) do policy
checks after calling xfrm_input handling in the respective encapsulation
layer.
Test: Verified with additional Android Kernel Unit tests
Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Devices that implement IPsec packet offload mode should offload SA and
policies too. In RX path, it causes to the situation that HW will always
have higher priority over any SW policies.
It means that we don't need to perform any search of inexact policies
and/or priority checks if HW policy was discovered. In such situation,
the HW will catch the packets anyway and HW can still implement inexact
lookups.
In case specific policy is not found, we will continue with packet lookup and
check for existence of HW policies in inexact list.
HW policies are added to the head of SPD to ensure fast lookup, as XFRM
iterates over all policies in the loop.
The same solution of adding HW SAs at the begging of the list is applied
to SA database too. However, we don't need to change lookups as they are
sorted by insertion order and not priority.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Extend netlink interface to add and delete XFRM policy from the device.
This functionality is a first step to implement packet IPsec offload solution.
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Total variable is not used in xfrm_byidx_resize() and can
be safely removed.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
1) Refactor selftests to use an array of structs in xfrm_fill_key().
From Gautam Menghani.
2) Drop an unused argument from xfrm_policy_match.
From Hongbin Wang.
3) Support collect metadata mode for xfrm interfaces.
From Eyal Birger.
4) Add netlink extack support to xfrm.
From Sabrina Dubroca.
Please note, there is a merge conflict in:
include/net/dst_metadata.h
between commit:
0a28bfd4971f ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support")
from the net-next tree and commit:
5182a5d48c3d ("net: allow storing xfrm interface metadata in metadata_dst")
from the ipsec-next tree.
Can be solved as done in linux-next.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit adds support for 'collect_md' mode on xfrm interfaces.
Each net can have one collect_md device, created by providing the
IFLA_XFRM_COLLECT_METADATA flag at creation. This device cannot be
altered and has no if_id or link device attributes.
On transmit to this device, the if_id is fetched from the attached dst
metadata on the skb. If exists, the link property is also fetched from
the metadata. The dst metadata type used is METADATA_XFRM which holds
these properties.
On the receive side, xfrmi_rcv_cb() populates a dst metadata for each
packet received and attaches it to the skb. The if_id used in this case is
fetched from the xfrm state, and the link is fetched from the incoming
device. This information can later be used by upper layers such as tc,
ebpf, and ip rules.
Because the skb is scrubed in xfrmi_rcv_cb(), the attachment of the dst
metadata is postponed until after scrubing. Similarly, xfrm_input() is
adapted to avoid dropping metadata dsts by only dropping 'valid'
(skb_valid_dst(skb) == true) dsts.
Policy matching on packets arriving from collect_md xfrmi devices is
done by using the xfrm state existing in the skb's sec_path.
The xfrm_if_cb.decode_cb() interface implemented by xfrmi_decode_session()
is changed to keep the details of the if_id extraction tucked away
in xfrm_interface.c.
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Drop unused argument from xfrm_policy_match,
__xfrm_policy_eval_candidates and xfrm_policy_eval_candidates.
No functional changes intended.
Signed-off-by: Hongbin Wang <wh_bin@126.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
When we try to transmit an skb with metadata_dst attached (i.e. dst->dev
== NULL) through xfrm interface we can hit a null pointer dereference[1]
in xfrmi_xmit2() -> xfrm_lookup_with_ifid() due to the check for a
loopback skb device when there's no policy which dereferences dst->dev
unconditionally. Not having dst->dev can be interepreted as it not being
a loopback device, so just add a check for a null dst_orig->dev.
With this fix xfrm interface's Tx error counters go up as usual.
[1] net-next calltrace captured via netconsole:
BUG: kernel NULL pointer dereference, address: 00000000000000c0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 7231 Comm: ping Kdump: loaded Not tainted 5.19.0+ #24
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014
RIP: 0010:xfrm_lookup_with_ifid+0x5eb/0xa60
Code: 8d 74 24 38 e8 26 a4 37 00 48 89 c1 e9 12 fc ff ff 49 63 ed 41 83 fd be 0f 85 be 01 00 00 41 be ff ff ff ff 45 31 ed 48 8b 03 <f6> 80 c0 00 00 00 08 75 0f 41 80 bc 24 19 0d 00 00 01 0f 84 1e 02
RSP: 0018:ffffb0db82c679f0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffd0db7fcad430 RCX: ffffb0db82c67a10
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb0db82c67a80
RBP: ffffb0db82c67a80 R08: ffffb0db82c67a14 R09: 0000000000000000
R10: 0000000000000000 R11: ffff8fa449667dc8 R12: ffffffff966db880
R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000
FS: 00007ff35c83f000(0000) GS:ffff8fa478480000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000c0 CR3: 000000001ebb7000 CR4: 0000000000350ee0
Call Trace:
<TASK>
xfrmi_xmit+0xde/0x460
? tcf_bpf_act+0x13d/0x2a0
dev_hard_start_xmit+0x72/0x1e0
__dev_queue_xmit+0x251/0xd30
ip_finish_output2+0x140/0x550
ip_push_pending_frames+0x56/0x80
raw_sendmsg+0x663/0x10a0
? try_charge_memcg+0x3fd/0x7a0
? __mod_memcg_lruvec_state+0x93/0x110
? sock_sendmsg+0x30/0x40
sock_sendmsg+0x30/0x40
__sys_sendto+0xeb/0x130
? handle_mm_fault+0xae/0x280
? do_user_addr_fault+0x1e7/0x680
? kvm_read_and_reset_apf_flags+0x3b/0x50
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7ff35cac1366
Code: eb 0b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89
RSP: 002b:00007fff738e4028 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007fff738e57b0 RCX: 00007ff35cac1366
RDX: 0000000000000040 RSI: 0000557164e4b450 RDI: 0000000000000003
RBP: 0000557164e4b450 R08: 00007fff738e7a2c R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
R13: 00007fff738e5770 R14: 00007fff738e4030 R15: 0000001d00000001
</TASK>
Modules linked in: netconsole veth br_netfilter bridge bonding virtio_net [last unloaded: netconsole]
CR2: 00000000000000c0
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Daniel Borkmann <daniel@iogearbox.net>
Fixes: 2d151d39073a ("xfrm: Add possibility to set the default to block if we have no policy")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The issue happens on an error path in __xfrm_policy_check(). When the
fetching process of the object `pols[1]` fails, the function simply
returns 0, forgetting to decrement the reference count of `pols[0]`,
which is incremented earlier by either xfrm_sk_policy_lookup() or
xfrm_policy_lookup(). This may result in memory leaks.
Fix it by decreasing the reference count of `pols[0]` in that path.
Fixes: 134b0fc544ba ("IPsec: propagate security module errors up from flow_cache_lookup")
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
xfrm_policy_lookup() will call xfrm_pol_hold_rcu() to get a refcount of
pols[0]. This refcount can be dropped in xfrm_expand_policies() when
xfrm_expand_policies() return error. pols[0]'s refcount is balanced in
here. But xfrm_bundle_lookup() will also call xfrm_pols_put() with
num_pols == 1 to drop this refcount when xfrm_expand_policies() return
error.
This patch also fix an illegal address access. pols[0] will save a error
point when xfrm_policy_lookup fails. This lead to xfrm_pols_put to resolve
an illegal address in xfrm_bundle_lookup's error path.
Fix these by setting num_pols = 0 in xfrm_expand_policies()'s error path.
Fixes: 80c802f3073e ("xfrm: cache bundles instead of policies for outgoing flows")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The global blackhole_netdev has replaced pernet loopback_dev to become the
one given to the object that holds an netdev when ifdown in many places of
ipv4 and ipv6 since commit 8d7017fd621d ("blackhole_netdev: use
blackhole_netdev to invalidate dst entries").
Especially after commit faab39f63c1f ("net: allow out-of-order netdev
unregistration"), it's no longer safe to use loopback_dev that may be
freed before other netdev.
This patch is to set dst dev to blackhole_netdev instead of loopback_dev
in ifdown.
v1->v2:
- add Fixes tag as Eric suggested.
Fixes: faab39f63c1f ("net: allow out-of-order netdev unregistration")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/e8c87482998ca6fcdab214f5a9d582899ec0c648.1652665047.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The commit referenced in the Fixes tag no longer changes the
flow oif to the l3mdev ifindex. A xfrm use case was expecting
the flowi_oif to be the VRF if relevant and the change broke
that test. Update xfrm_bundle_create to pass oif if set and any
potential flowi_l3mdev if oif is not set.
Fixes: 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2022-03-19
1) Delete duplicated functions that calls same xfrm_api_check.
From Leon Romanovsky.
2) Align userland API of the default policy structure to the
internal structures. From Nicolas Dichtel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a follow up of commit f8d858e607b2 ("xfrm: make user policy API
complete"). The goal is to align userland API to the internal structures.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This patch enables distinguishing SAs and SPs based on if_id during
the xfrm_migrate flow. This ensures support for xfrm interfaces
throughout the SA/SP lifecycle.
When there are multiple existing SPs with the same direction,
the same xfrm_selector and different endpoint addresses,
xfrm_migrate might fail with ENODATA.
Specifically, the code path for performing xfrm_migrate is:
Stage 1: find policy to migrate with
xfrm_migrate_policy_find(sel, dir, type, net)
Stage 2: find and update state(s) with
xfrm_migrate_state_find(mp, net)
Stage 3: update endpoint address(es) of template(s) with
xfrm_policy_migrate(pol, m, num_migrate)
Currently "Stage 1" always returns the first xfrm_policy that
matches, and "Stage 3" looks for the xfrm_tmpl that matches the
old endpoint address. Thus if there are multiple xfrm_policy
with same selector, direction, type and net, "Stage 1" might
rertun a wrong xfrm_policy and "Stage 3" will fail with ENODATA
because it cannot find a xfrm_tmpl with the matching endpoint
address.
The fix is to allow userspace to pass an if_id and add if_id
to the matching rule in Stage 1 and Stage 2 since if_id is a
unique ID for xfrm_policy and xfrm_state. For compatibility,
if_id will only be checked if the attribute is set.
Tested with additions to Android's kernel unit test suite:
https://android-review.googlesource.com/c/kernel/tests/+/1668886
Signed-off-by: Yan Yan <evitayan@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Similar to commit 94e2238969e8 ("xfrm4: strip ECN bits from tos field"),
clear the ECN bits from iph->tos when setting ->flowi4_tos.
This ensures that the last bit of ->flowi4_tos is cleared, so
ip_route_output_key_hash() isn't going to restrict the scope of the
route lookup.
Use ~INET_ECN_MASK instead of IPTOS_RT_MASK, because we have no reason
to clear the high order bits.
Found by code inspection, compile tested only.
Fixes: 4da3089f2b58 ("[IPSEC]: Use TOS when doing tunnel lookups")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge in fixes directly in prep for the 5.17 merge window.
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
!pols[0] is checked earlier. If we don't return, pols[0] is always
true. We should drop the check of pols[0] for the second time and the
binary is also smaller.
Before:
text data bss dec hex filename
48395 957 240 49592 c1b8 net/xfrm/xfrm_policy.o
After:
text data bss dec hex filename
48379 957 240 49576 c1a8 net/xfrm/xfrm_policy.o
Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|