summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2015-09-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds411-7873/+14465
Pull networking updates from David Miller: "Another merge window, another set of networking changes. I've heard rumblings that the lightweight tunnels infrastructure has been voted networking change of the year. But what do I know? 1) Add conntrack support to openvswitch, from Joe Stringer. 2) Initial support for VRF (Virtual Routing and Forwarding), which allows the segmentation of routing paths without using multiple devices. There are some semantic kinks to work out still, but this is a reasonably strong foundation. From David Ahern. 3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov. 4) Ignore route nexthops with a link down state in ipv6, just like ipv4. From Andy Gospodarek. 5) Remove spinlock from fast path of act_gact and act_mirred, from Eric Dumazet. 6) Document the DSA layer, from Florian Fainelli. 7) Add netconsole support to bcmgenet, systemport, and DSA. Also from Florian Fainelli. 8) Add Mellanox Switch Driver and core infrastructure, from Jiri Pirko. 9) Add support for "light weight tunnels", which allow for encapsulation and decapsulation without bearing the overhead of a full blown netdevice. From Thomas Graf, Jiri Benc, and a cast of others. 10) Add Identifier Locator Addressing support for ipv6, from Tom Herbert. 11) Support fragmented SKBs in iwlwifi, from Johannes Berg. 12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia. 13) Add BQL support to 3c59x driver, from Loganaden Velvindron. 14) Stop using a zero TX queue length to mean that a device shouldn't have a qdisc attached, use an explicit flag instead. From Phil Sutter. 15) Use generic geneve netdevice infrastructure in openvswitch, from Pravin B Shelar. 16) Add infrastructure to avoid re-forwarding a packet in software that was already forwarded by a hardware switch. From Scott Feldman. 17) Allow AF_PACKET fanout function to be implemented in a bpf program, from Willem de Bruijn" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits) netfilter: nf_conntrack: make nf_ct_zone_dflt built-in netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled net: fec: clear receive interrupts before processing a packet ipv6: fix exthdrs offload registration in out_rt path xen-netback: add support for multicast control bgmac: Update fixed_phy_register() sock, diag: fix panic in sock_diag_put_filterinfo flow_dissector: Use 'const' where possible. flow_dissector: Fix function argument ordering dependency ixgbe: Resolve "initialized field overwritten" warnings ixgbe: Remove bimodal SR-IOV disabling ixgbe: Add support for reporting 2.5G link speed ixgbe: fix bounds checking in ixgbe_setup_tc for 82598 ixgbe: support for ethtool set_rxfh ixgbe: Avoid needless PHY access on copper phys ixgbe: cleanup to use cached mask value ixgbe: Remove second instance of lan_id variable ixgbe: use kzalloc for allocating one thing flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c ixgbe: Remove unused PCI bus types ...
2015-09-03netfilter: nf_conntrack: make nf_ct_zone_dflt built-inDaniel Borkmann2-7/+6
Fengguang reported, that some randconfig generated the following linker issue with nf_ct_zone_dflt object involved: [...] CC init/version.o LD init/built-in.o net/built-in.o: In function `ipv4_conntrack_defrag': nf_defrag_ipv4.c:(.text+0x93e95): undefined reference to `nf_ct_zone_dflt' net/built-in.o: In function `ipv6_defrag': nf_defrag_ipv6_hooks.c:(.text+0xe3ffe): undefined reference to `nf_ct_zone_dflt' make: *** [vmlinux] Error 1 Given that configurations exist where we have a built-in part, which is accessing nf_ct_zone_dflt such as the two handlers nf_ct_defrag_user() and nf_ct6_defrag_user(), and a part that configures nf_conntrack as a module, we must move nf_ct_zone_dflt into a fixed, guaranteed built-in area when netfilter is configured in general. Therefore, split the more generic parts into a common header under include/linux/netfilter/ and move nf_ct_zone_dflt into the built-in section that already holds parts related to CONFIG_NF_CONNTRACK in the netfilter core. This fixes the issue on my side. Fixes: 308ac9143ee2 ("netfilter: nf_conntrack: push zone object into functions") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-03netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabledDaniel Borkmann2-0/+2
While testing various Kconfig options on another issue, I found that the following one triggers as well on allmodconfig and nf_conntrack disabled: net/ipv4/netfilter/nf_dup_ipv4.c: In function ‘nf_dup_ipv4’: net/ipv4/netfilter/nf_dup_ipv4.c:72:20: error: ‘nf_skb_duplicated’ undeclared (first use in this function) if (this_cpu_read(nf_skb_duplicated)) [...] net/ipv6/netfilter/nf_dup_ipv6.c: In function ‘nf_dup_ipv6’: net/ipv6/netfilter/nf_dup_ipv6.c:66:20: error: ‘nf_skb_duplicated’ undeclared (first use in this function) if (this_cpu_read(nf_skb_duplicated)) Fix it by including directly the header where it is defined. Fixes: bbde9fc1824a ("netfilter: factor out packet duplication for IPv4/IPv6") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-03ipv6: fix exthdrs offload registration in out_rt pathDaniel Borkmann1-1/+1
We previously register IPPROTO_ROUTING offload under inet6_add_offload(), but in error path, we try to unregister it with inet_del_offload(). This doesn't seem correct, it should actually be inet6_del_offload(), also ipv6_exthdrs_offload_exit() from that commit seems rather incorrect (it also uses rthdr_offload twice), but it got removed entirely later on. Fixes: 3336288a9fea ("ipv6: Switch to using new offload infrastructure.") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02sock, diag: fix panic in sock_diag_put_filterinfoDaniel Borkmann1-0/+3
diag socket's sock_diag_put_filterinfo() dumps classic BPF programs upon request to user space (ss -0 -b). However, native eBPF programs attached to sockets (SO_ATTACH_BPF) cannot be dumped with this method: Their orig_prog is always NULL. However, sock_diag_put_filterinfo() unconditionally tries to access its filter length resp. wants to copy the filter insns from there. Internal cBPF to eBPF transformations attached to sockets don't have this issue, as orig_prog state is kept. It's currently only used by packet sockets. If we would want to add native eBPF support in the future, this needs to be done through a different attribute than PACKET_DIAG_FILTER to not confuse possible user space disassemblers that work on diag data. Fixes: 89aa075832b0 ("net: sock: allow eBPF programs to be attached to sockets") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02flow_dissector: Use 'const' where possible.David S. Miller1-38/+41
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02flow: Move __get_hash_from_flowi{4,6} into flow_dissector.cDavid S. Miller2-36/+35
These cannot live in net/core/flow.c which only builds when XFRM is enabled. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02flow_dissector: Don't use bit fields.David S. Miller1-7/+7
Just have a flags member instead. In file included from include/linux/linkage.h:4:0, from include/linux/kernel.h:6, from net/core/flow_dissector.c:1: In function 'flow_keys_hash_start', inlined from 'flow_hash_from_keys' at net/core/flow_dissector.c:553:34: >> include/linux/compiler.h:447:38: error: call to '__compiletime_assert_459' declared with attribute error: BUILD_BUG_ON failed: FLOW_KEYS_HASH_OFFSET % sizeof(u32) Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02flow_dissector: Ignore flow dissector return value from ___skb_get_hashTom Herbert1-9/+3
In ___skb_get_hash ignore return value from skb_flow_dissect_flow_keys. A failure in that function likely means that there was a parse error, so we may as well use whatever fields were found before the error was hit. This is also good because it means we won't keep trying to derive the hash on subsequent calls to skb_get_hash for the same packet. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02flow_dissector: Add control/reporting of encapsulationTom Herbert1-0/+15
Add an input flag to flow dissector on rather dissection should stop when encapsulation is detected (IP/IP or GRE). Also, add a key_control flag that indicates encapsulation was encountered during the dissection. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02flow_dissector: Add flag to stop parsing when an IPv6 flow label is seenTom Herbert1-1/+4
Add an input flag to flow dissector on rather dissection should be stopped when a flow label is encountered. Presumably, the flow label is derived from a sufficient hash of an inner transport packet so further dissection is not needed (that is ports are not included in the flow hash). Using the flow label instead of ports has the additional benefit that packet fragments should hash to same value as non-fragments for a flow (assuming that the same flow label is used). We set this flag by default in for skb_get_hash. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02flow_dissector: Add flag to stop parsing at L3Tom Herbert1-0/+6
Add an input flag to flow dissector on rather dissection should be stopped when an L3 packet is encountered. This would be useful if a caller just wanted to get IP addresses of the outermost header (e.g. to do an L3 hash). Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02flow_dissector: Support IPv6 fragment headerTom Herbert1-0/+25
Parse NEXTHDR_FRAGMENT. When seen account for it in the fragment bits of key_control. Also, check if first fragment should be parsed. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02flow_dissector: Add control/reporting of fragmentationTom Herbert1-2/+13
Add an input flag to flow dissector on rather dissection should be attempted on a first fragment. Also add key_control flags to indicate that a packet is a fragment or first fragment. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02flow_dissector: Add flags argument to skb_flow_dissector functionsTom Herbert5-8/+9
The flags argument will allow control of the dissection process (for instance whether to parse beyond L3). Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02flow_dissector: Jump to exit code in __skb_flow_dissectTom Herbert1-26/+25
Instead of returning immediately (on a parsing failure for instance) we jump to cleanup code. This always sets protocol values in key_control (even on a failure there is still valid information in the key_tags that was set before the problem was hit). Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02flowi: Abstract out functions to get flow hash based on flowiTom Herbert1-0/+36
Create __get_hash_from_flowi6 and __get_hash_from_flowi4 to get the flow keys and hash based on flowi structures. These are called by __skb_get_hash_flowi6 and __skb_get_hash_flowi4. Also, created get_hash_from_flowi6 and get_hash_from_flowi4 which can be called when just the hash value for a flowi is needed. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02skbuff: Make __skb_set_sw_hash a general functionTom Herbert1-12/+6
Move __skb_set_sw_hash to skbuff.h and add __skb_set_hash which is a common method (between __skb_set_sw_hash and skb_set_hash) to set the hash in an skbuff. Also, move skb_clear_hash to be closer to __skb_set_hash. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02net: Make table id type u32David Ahern3-7/+7
A number of VRF patches used 'int' for table id. It should be u32 to be consistent with the rest of the stack. Fixes: 4e3c89920cd3a ("net: Introduce VRF related flags and helpers") 15be405eb2ea9 ("net: Add inet_addr lookup by table") 30bbaa1950055 ("net: Fix up inet_addr_type checks") 021dd3b8a142d ("net: Add routes to the table associated with the device") dc028da54ed35 ("inet: Move VRF table lookup to inlined function") f6d3c19274c74 ("net: FIB tracepoints") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01tun_dst: Remove opts_sizePravin B Shelar1-1/+0
opts_size is only written and never read. Following patch removes this unused variable. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01ipv6: send only one NEWLINK when RA causes changesMarius Tomaschewski1-3/+10
Signed-off-by: Marius Tomaschewski <mt@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-7/+7
Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.3: API: - the AEAD interface transition is now complete. - add top-level skcipher interface. Drivers: - x86-64 acceleration for chacha20/poly1305. - add sunxi-ss Allwinner Security System crypto accelerator. - add RSA algorithm to qat driver. - add SRIOV support to qat driver. - add LS1021A support to caam. - add i.MX6 support to caam" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (163 commits) crypto: algif_aead - fix for multiple operations on AF_ALG sockets crypto: qat - enable legacy VFs MPI: Fix mpi_read_buffer crypto: qat - silence a static checker warning crypto: vmx - Fixing opcode issue crypto: caam - Use the preferred style for memory allocations crypto: caam - Propagate the real error code in caam_probe crypto: caam - Fix the error handling in caam_probe crypto: caam - fix writing to JQCR_MS when using service interface crypto: hash - Add AHASH_REQUEST_ON_STACK crypto: testmgr - Use new skcipher interface crypto: skcipher - Add top-level skcipher interface crypto: cmac - allow usage in FIPS mode crypto: sahara - Use dmam_alloc_coherent crypto: caam - Add support for LS1021A crypto: qat - Don't move data inside output buffer crypto: vmx - Fixing GHASH Key issue on little endian crypto: vmx - Fixing AES-CTR counter bug crypto: null - Add missing Kconfig tristate for NULL2 crypto: nx - Add forward declaration for struct crypto_aead ...
2015-09-01ipv6: send NEWLINK on RA managed/otherconf changesMarius Tomaschewski1-0/+5
The kernel is applying the RA managed/otherconf flags silently and forgets to send ifinfo notify to inform about their change when the router provides a zero reachable_time and retrans_timer as dnsmasq and many routers send it, which just means unspecified by this router and the host should continue using whatever value it is already using. Userspace may monitor the ifinfo notifications to activate dhcpv6. Signed-off-by: Marius Tomaschewski <mt@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01net: dsa: Allow DSA and CPU ports to have a phy-mode propertyAndrew Lunn1-1/+7
It can be useful for DSA and CPU ports to have a phy-mode property, in particular to specify RGMII delays. Parse the property and set it in the fixed-link phydev. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01net: dsa: Allow configuration of CPU & DSA port speeds/duplexAndrew Lunn1-0/+37
By default, DSA and CPU ports are configured to the maximum speed the switch supports. However there can be use cases where the peer devices port is slower. Allow a fixed-link property to be used with the DSA and CPU port in the device tree, and use this information to configure the port. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31mpls: fix mpls_net_init memory leakNikolay Aleksandrov1-1/+3
Fix a memory leak in the mpls netns init function in case of failure. If register_net_sysctl fails then we need to free the ctl_table. Fixes: 7720c01f3f59 ("mpls: Add a sysctl to control the size of the mpls label table") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31tcp: use dctcp if enabled on the route to the initiatorDaniel Borkmann5-8/+29
Currently, the following case doesn't use DCTCP, even if it should: A responder has f.e. Cubic as system wide default, but for a specific route to the initiating host, DCTCP is being set in RTAX_CC_ALGO. The initiating host then uses DCTCP as congestion control, but since the initiator sets ECT(0), tcp_ecn_create_request() doesn't set ecn_ok, and we have to fall back to Reno after 3WHS completes. We were thinking on how to solve this in a minimal, non-intrusive way without bloating tcp_ecn_create_request() needlessly: lets cache the CA ecn option flag in RTAX_FEATURES. In other words, when ECT(0) is set on the SYN packet, set ecn_ok=1 iff route RTAX_FEATURES contains the unexposed (internal-only) DST_FEATURE_ECN_CA. This allows to only do a single metric feature lookup inside tcp_ecn_create_request(). Joint work with Florian Westphal. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31fib, fib6: reject invalid feature bitsDaniel Borkmann2-0/+4
Feature bits that are invalid should not be accepted by the kernel, only the lower 4 bits may be configured, but not the remaining ones. Even from these 4, 2 of them are unused. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31net: fib6: reduce identation in ip6_convert_metricsDaniel Borkmann1-16/+16
Reduce the identation a bit, there's no need to artificically have it increased. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31net: fib: move metrics parsing to a helperFlorian Westphal1-30/+41
fib_create_info() is already quite large, so before adding more code to the metrics section move that to a helper, similar to ip6_convert_metrics. Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31ip-tunnel: Use API to access tunnel metadata options.Pravin B Shelar12-51/+50
Currently tun-info options pointer is used in few cases to pass options around. But tunnel options can be accessed using ip_tunnel_info_opts() API without using the pointer. Following patch removes the redundant pointer and consistently make use of API. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Reviewed-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31ipv4: fix 32b buildMadalin Bucur1-1/+1
Address remaining issue after 80ec192. Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31ipv4: Fix 32-bit build.David S. Miller1-2/+2
net/ipv4/af_inet.c: In function 'snmp_get_cpu_field64': >> net/ipv4/af_inet.c:1486:26: error: 'offt' undeclared (first use in this function) v = *(((u64 *)bhptr) + offt); ^ net/ipv4/af_inet.c:1486:26: note: each undeclared identifier is reported only once for each function it appears in net/ipv4/af_inet.c: In function 'snmp_fold_field64': >> net/ipv4/af_inet.c:1499:39: error: 'offct' undeclared (first use in this function) res += snmp_get_cpu_field(mib, cpu, offct, syncp_offset); ^ >> net/ipv4/af_inet.c:1499:10: error: too many arguments to function 'snmp_get_cpu_field' res += snmp_get_cpu_field(mib, cpu, offct, syncp_offset); ^ net/ipv4/af_inet.c:1455:5: note: declared here u64 snmp_get_cpu_field(void __percpu *mib, int cpu, int offt) ^ Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31netlink: rx mmap: fix POLLIN conditionKen-ichirou MATSUZAWA1-12/+16
Poll() returns immediately after setting the kernel current frame (ring->head) to SKIP from user space even though there is no new frame. And in a case of all frames is VALID, user space program unintensionally sets (only) kernel current frame to UNUSED, then calls poll(), it will not return immediately even though there are VALID frames. To avoid situations like above, I think we need to scan all frames to find VALID frames at poll() like netlink_alloc_skb(), netlink_forward_ring() finding an UNUSED frame at skb allocation. Signed-off-by: Ken-ichirou MATSUZAWA <chamas@h4.dion.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31net: Optimize snmp stat aggregation by walking all the percpu data at onceRaghavendra K T1-10/+16
Docker container creation linearly increased from around 1.6 sec to 7.5 sec (at 1000 containers) and perf data showed 50% ovehead in snmp_fold_field. reason: currently __snmp6_fill_stats64 calls snmp_fold_field that walks through per cpu data of an item (iteratively for around 36 items). idea: This patch tries to aggregate the statistics by going through all the items of each cpu sequentially which is reducing cache misses. Docker creation got faster by more than 2x after the patch. Result: Before After Docker creation time 6.836s 3.25s cache miss 2.7% 1.41% perf before: 50.73% docker [kernel.kallsyms] [k] snmp_fold_field 9.07% swapper [kernel.kallsyms] [k] snooze_loop 3.49% docker [kernel.kallsyms] [k] veth_stats_one 2.85% swapper [kernel.kallsyms] [k] _raw_spin_lock perf after: 10.57% docker docker [.] scanblock 8.37% swapper [kernel.kallsyms] [k] snooze_loop 6.91% docker [kernel.kallsyms] [k] snmp_get_cpu_field 6.67% docker [kernel.kallsyms] [k] veth_stats_one changes/ideas suggested: Using buffer in stack (Eric), Usage of memset (David), Using memcpy in place of unaligned_put (Joe). Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31net: Introduce helper functions to get the per cpu dataRaghavendra K T1-14/+27
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-8/+40
2015-08-30openvswitch: Remove vport-netPravin B Shelar3-7/+2
This structure is not used anymore. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-30openvswitch: Remove vport stats.Pravin B Shelar5-170/+56
Since all vport types are now backed by netdev, we can directly use netdev stats. Following patch removes redundant stat from vport. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-30openvswitch: Remove egress_tun_info.Pravin B Shelar8-20/+7
tun info is passed using skb-dst pointer. Now we have converted all vports to netdev based implementation so Now we can remove redundant pointer to tun-info from OVS_CB. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-30openvswitch: Remove vport get_name()Pravin B Shelar1-5/+1
Remove unused get_name() function pointer from vport ops. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29openvswitch: retain parsed IPv6 header fields in flow on error skipping ↵Simon Horman1-6/+15
extension headers When an error occurs skipping IPv6 extension headers retain the already parsed IP protocol and IPv6 addresses in the flow. Also assume that the packet is not a fragment in the absence of information to the contrary; that is always use the frag_off value set by ipv6_skip_exthdr(). This allows matching on the IP protocol and IPv6 addresses of packets with malformed extension headers. Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29Merge branch 'for-upstream' of ↵David S. Miller3-9/+24
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2015-08-28 One more bunch of Bluetooth patches for 4.3: - Crash fix for hci_bcm driver - Enhancements to hci_intel driver (e.g. baudrate configuration) - Fix for SCO link type after multiple connect attempts - Cleanups & minor fixes in a few other places Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29vxlan: do not receive IPv4 packets on IPv6 socketJiri Benc1-0/+9
By default (subject to the sysctl settings), IPv6 sockets listen also for IPv4 traffic. Vxlan is not prepared for that and expects IPv6 header in packets received through an IPv6 socket. In addition, it's currently not possible to have both IPv4 and IPv6 vxlan tunnel on the same port (unless bindv6only sysctl is enabled), as it's not possible to create and bind both IPv4 and IPv6 vxlan interfaces and there's no way to specify both IPv4 and IPv6 remote/group IP addresses. Set IPV6_V6ONLY on vxlan sockets to fix both of these issues. This is not done globally in udp_tunnel, as l2tp and tipc seems to work okay when receiving IPv4 packets on IPv6 socket and people may rely on this behavior. The other tunnels (geneve and fou) do not support IPv6. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29fou: reject IPv6 configJiri Benc1-1/+1
fou does not really support IPv6 encapsulation. After an UDP socket is created in fou_create, the encap_rcv callback is set either to fou_udp_recv or to gue_udp_recv. Both of those unconditionally assume that the received packet has an IPv4 header and access the data at network_header as it was an IPv4 header. This leads to IPv6 flow label being interpreted as IP packet length, etc. Disallow fou tunnel to be configured as IPv6 until real IPv6 support is added to fou. CC: Tom Herbert <tom@herbertland.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29ip_tunnels: record IP version in tunnel infoJiri Benc5-2/+9
There's currently nothing preventing directing packets with IPv6 encapsulation data to IPv4 tunnels (and vice versa). If this happens, IPv6 addresses are incorrectly interpreted as IPv4 ones. Track whether the given ip_tunnel_key contains IPv4 or IPv6 data. Store this in ip_tunnel_info. Reject packets at appropriate places if they are supposed to be encapsulated into an incompatible protocol. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29ip_tunnels: convert the mode field of ip_tunnel_info to flagsJiri Benc3-3/+3
The mode field holds a single bit of information only (whether the ip_tunnel_info struct is for rx or tx). Change the mode field to bit flags. This allows more mode flags to be added. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29net: FIB tracepointsDavid Ahern3-0/+9
A few useful tracepoints developing VRF driver. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29sctp: Do not try to search for the transport twiceVlad Yasevich1-1/+1
When removing an non-primary transport during ASCONF processing, we end up traversing the transport list twice: once in sctp_cmd_del_non_primary, and once in sctp_assoc_del_peer. We can avoid the second search and call sctp_assoc_rm_peer() instead. Found by code inspection during code reviews. Signed-off-by: Vladislav Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29sctp: ASCONF-ACK with Unresolvable Address should be sentlucien1-2/+13
RFC 5061: This is an opaque integer assigned by the sender to identify each request parameter. The receiver of the ASCONF Chunk will copy this 32-bit value into the ASCONF Response Correlation ID field of the ASCONF-ACK response parameter. The sender of the ASCONF can use this same value in the ASCONF-ACK to find which request the response is for. Note that the receiver MUST NOT change this 32-bit value. Address Parameter: TLV This field contains an IPv4 or IPv6 address parameter, as described in Section 3.3.2.1 of [RFC4960]. ASCONF chunk with Error Cause Indication Parameter (Unresolvable Address) should be sent if the Delete IP Address is not part of the association. Endpoint A Endpoint B (ESTABLISHED) (ESTABLISHED) ASCONF -----------------> (Delete IP Address) <----------------- ASCONF-ACK (Unresolvable Address) Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>