summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2022-07-14seg6: fix skb checksum evaluation in SRH encapsulation/insertionAndrea Mayer1-1/+4
Support for SRH encapsulation and insertion was introduced with commit 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels"), through the seg6_do_srh_encap() and seg6_do_srh_inline() functions, respectively. The former encapsulates the packet in an outer IPv6 header along with the SRH, while the latter inserts the SRH between the IPv6 header and the payload. Then, the headers are initialized/updated according to the operating mode (i.e., encap/inline). Finally, the skb checksum is calculated to reflect the changes applied to the headers. The IPv6 payload length ('payload_len') is not initialized within seg6_do_srh_{inline,encap}() but is deferred in seg6_do_srh(), i.e. the caller of seg6_do_srh_{inline,encap}(). However, this operation invalidates the skb checksum, since the 'payload_len' is updated only after the checksum is evaluated. To solve this issue, the initialization of the IPv6 payload length is moved from seg6_do_srh() directly into the seg6_do_srh_{inline,encap}() functions and before the skb checksum update takes place. Fixes: 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels") Reported-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/all/20220705190727.69d532417be7438b15404ee1@uniroma2.it Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-13Merge tag 'wireless-2022-07-13' of ↵David S. Miller7-29/+26
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== A small set of fixes for * queue selection in mesh/ocb * queue handling on interface stop * hwsim virtio device vs. some other virtio changes * dt-bindings email addresses * color collision memory allocation * a const variable in rtw88 * shared SKB transmit in the ethernet format path * P2P client port authorization ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13nexthop: Fix data-races around nexthop_compat_mode.Kuniyuki Iwashima3-4/+5
While reading nexthop_compat_mode, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 4f80116d3df3 ("net: ipv4: add sysctl for nexthop api compatibility mode") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13ipv4: Fix data-races around sysctl_ip_dynaddr.Kuniyuki Iwashima1-2/+2
While reading sysctl_ip_dynaddr, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13tcp: Fix a data-race around sysctl_tcp_ecn_fallback.Kuniyuki Iwashima2-1/+3
While reading sysctl_tcp_ecn_fallback, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 492135557dc0 ("tcp: add rfc3168, section 6.1.1.1. fallback") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13tcp: Fix data-races around sysctl_tcp_ecn.Kuniyuki Iwashima4-3/+5
While reading sysctl_tcp_ecn, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13icmp: Fix a data-race around sysctl_icmp_ratemask.Kuniyuki Iwashima1-1/+1
While reading sysctl_icmp_ratemask, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13icmp: Fix a data-race around sysctl_icmp_ratelimit.Kuniyuki Iwashima1-1/+2
While reading sysctl_icmp_ratelimit, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13icmp: Fix a data-race around sysctl_icmp_errors_use_inbound_ifaddr.Kuniyuki Iwashima2-1/+3
While reading sysctl_icmp_errors_use_inbound_ifaddr, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 1c2fb7f93cb2 ("[IPV4]: Sysctl configurable icmp error source address.") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13icmp: Fix a data-race around sysctl_icmp_ignore_bogus_error_responses.Kuniyuki Iwashima2-1/+3
While reading sysctl_icmp_ignore_bogus_error_responses, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13icmp: Fix a data-race around sysctl_icmp_echo_ignore_broadcasts.Kuniyuki Iwashima2-1/+3
While reading sysctl_icmp_echo_ignore_broadcasts, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13icmp: Fix data-races around sysctl_icmp_echo_enable_probe.Kuniyuki Iwashima2-2/+2
While reading sysctl_icmp_echo_enable_probe, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: d329ea5bd884 ("icmp: add response to RFC 8335 PROBE messages") Fixes: 1fd07f33c3ea ("ipv6: ICMPV6: add response to ICMPV6 RFC 8335 PROBE messages") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13icmp: Fix a data-race around sysctl_icmp_echo_ignore_all.Kuniyuki Iwashima2-1/+3
While reading sysctl_icmp_echo_ignore_all, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13tcp: Fix a data-race around sysctl_max_tw_buckets.Kuniyuki Iwashima1-1/+2
While reading sysctl_max_tw_buckets, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-12net: ipv4: fix clang -Wformat warningsJustin Stitt2-2/+2
When building with Clang we encounter these warnings: | net/ipv4/ah4.c:513:4: error: format specifies type 'unsigned short' but | the argument has type 'int' [-Werror,-Wformat] | aalg_desc->uinfo.auth.icv_fullbits / 8); - | net/ipv4/esp4.c:1114:5: error: format specifies type 'unsigned short' | but the argument has type 'int' [-Werror,-Wformat] | aalg_desc->uinfo.auth.icv_fullbits / 8); `aalg_desc->uinfo.auth.icv_fullbits` is a u16 but due to default argument promotion becomes an int. Variadic functions (printf-like) undergo default argument promotion. Documentation/core-api/printk-formats.rst specifically recommends using the promoted-to-type's format flag. As per C11 6.3.1.1: (https://www.open-std.org/jtc1/sc22/wg14/www/docs/n1548.pdf) `If an int can represent all values of the original type ..., the value is converted to an int; otherwise, it is converted to an unsigned int. These are called the integer promotions.` Thus it makes sense to change %hu to %d not only to follow this standard but to suppress the warning as well. Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Justin Stitt <justinstitt@google.com> Suggested-by: Joe Perches <joe@perches.com> Suggested-by: Nathan Chancellor <nathan@kernel.org> Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller5-25/+81
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) refcount_inc_not_zero() is not semantically equivalent to atomic_int_not_zero(), from Florian Westphal. My understanding was that refcount_*() API provides a wrapper to easier debugging of reference count leaks, however, there are semantic differences between these two APIs, where refcount_inc_not_zero() needs a barrier. Reason for this subtle difference to me is unknown. 2) packet logging is not correct for ARP and IP packets, from the ARP family and netdev/egress respectively. Use skb_network_offset() to reach the headers accordingly. 3) set element extension length have been growing over time, replace a BUG_ON by EINVAL which might be triggerable from userspace. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-11mptcp: fix subflow traversal at disconnect timePaolo Abeni1-2/+2
At disconnect time the MPTCP protocol traverse the subflows list closing each of them. In some circumstances - MPJ subflow, passive MPTCP socket, the latter operation can remove the subflow from the list, invalidating the current iterator. Address the issue using the safe list traversing helper variant. Reported-by: van fantasy <g1042620637@gmail.com> Fixes: b29fcfb54cd7 ("mptcp: full disconnect implementation") Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-11wifi: mac80211: fix queue selection for mesh/OCB interfacesFelix Fietkau1-2/+2
When using iTXQ, the code assumes that there is only one vif queue for broadcast packets, using the BE queue. Allowing non-BE queue marking violates that assumption and txq->ac == skb_queue_mapping is no longer guaranteed. This can cause issues with queue handling in the driver and also causes issues with the recent ATF change, resulting in an AQL underflow warning. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20220702145227.39356-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-09netfilter: nf_tables: replace BUG_ON by element length checkPablo Neira Ayuso1-21/+51
BUG_ON can be triggered from userspace with an element with a large userdata area. Replace it by length check and return EINVAL instead. Over time extensions have been growing in size. Pick a sufficiently old Fixes: tag to propagate this fix. Fixes: 7d7402642eaf ("netfilter: nf_tables: variable sized set element keys / data") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-07-09vlan: fix memory leak in vlan_newlink()Eric Dumazet1-3/+7
Blamed commit added back a bug I fixed in commit 9bbd917e0bec ("vlan: fix memory leak in vlan_dev_set_egress_priority") If a memory allocation fails in vlan_changelink() after other allocations succeeded, we need to call vlan_dev_free_egress_priority() to free all allocated memory because after a failed ->newlink() we do not call any methods like ndo_uninit() or dev->priv_destructor(). In following example, if the allocation for last element 2000:2001 fails, we need to free eight prior allocations: ip link add link dummy0 dummy0.100 type vlan id 100 \ egress-qos-map 1:2 2:3 3:4 4:5 5:6 6:7 7:8 8:9 2000:2001 syzbot report was: BUG: memory leak unreferenced object 0xffff888117bd1060 (size 32): comm "syz-executor408", pid 3759, jiffies 4294956555 (age 34.090s) hex dump (first 32 bytes): 09 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff83fc60ad>] kmalloc include/linux/slab.h:600 [inline] [<ffffffff83fc60ad>] vlan_dev_set_egress_priority+0xed/0x170 net/8021q/vlan_dev.c:193 [<ffffffff83fc6628>] vlan_changelink+0x178/0x1d0 net/8021q/vlan_netlink.c:128 [<ffffffff83fc67c8>] vlan_newlink+0x148/0x260 net/8021q/vlan_netlink.c:185 [<ffffffff838b1278>] rtnl_newlink_create net/core/rtnetlink.c:3363 [inline] [<ffffffff838b1278>] __rtnl_newlink+0xa58/0xdc0 net/core/rtnetlink.c:3580 [<ffffffff838b1629>] rtnl_newlink+0x49/0x70 net/core/rtnetlink.c:3593 [<ffffffff838ac66c>] rtnetlink_rcv_msg+0x21c/0x5c0 net/core/rtnetlink.c:6089 [<ffffffff839f9c37>] netlink_rcv_skb+0x87/0x1d0 net/netlink/af_netlink.c:2501 [<ffffffff839f8da7>] netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] [<ffffffff839f8da7>] netlink_unicast+0x397/0x4c0 net/netlink/af_netlink.c:1345 [<ffffffff839f9266>] netlink_sendmsg+0x396/0x710 net/netlink/af_netlink.c:1921 [<ffffffff8384dbf6>] sock_sendmsg_nosec net/socket.c:714 [inline] [<ffffffff8384dbf6>] sock_sendmsg+0x56/0x80 net/socket.c:734 [<ffffffff8384e15c>] ____sys_sendmsg+0x36c/0x390 net/socket.c:2488 [<ffffffff838523cb>] ___sys_sendmsg+0x8b/0xd0 net/socket.c:2542 [<ffffffff838525b8>] __sys_sendmsg net/socket.c:2571 [inline] [<ffffffff838525b8>] __do_sys_sendmsg net/socket.c:2580 [inline] [<ffffffff838525b8>] __se_sys_sendmsg net/socket.c:2578 [inline] [<ffffffff838525b8>] __x64_sys_sendmsg+0x78/0xf0 net/socket.c:2578 [<ffffffff845ad8d5>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff845ad8d5>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff8460006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: 37aa50c539bc ("vlan: introduce vlan_dev_free_egress_priority") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Xin Long <lucien.xin@gmail.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-09netfilter: nf_log: incorrect offset to network headerPablo Neira Ayuso1-4/+4
NFPROTO_ARP is expecting to find the ARP header at the network offset. In the particular case of ARP, HTYPE= field shows the initial bytes of the ethernet header destination MAC address. netdev out: IN= OUT=bridge0 MACSRC=c2:76:e5:71:e1:de MACDST=36:b0:4a:e2:72:ea MACPROTO=0806 ARP HTYPE=14000 PTYPE=0x4ae2 OPCODE=49782 NFPROTO_NETDEV egress hook is also expecting to find the IP headers at the network offset. Fixes: 35b9395104d5 ("netfilter: add generic ARP packet logger") Reported-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-07-09Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski1-2/+6
Daniel Borkmann says: ==================== bpf 2022-07-08 We've added 3 non-merge commits during the last 2 day(s) which contain a total of 7 files changed, 40 insertions(+), 24 deletions(-). The main changes are: 1) Fix cBPF splat triggered by skb not having a mac header, from Eric Dumazet. 2) Fix spurious packet loss in generic XDP when pushing packets out (note that native XDP is not affected by the issue), from Johan Almbladh. 3) Fix bpf_dynptr_{read,write}() helper signatures with flag argument before its set in stone as UAPI, from Joanne Koong. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Add flags arg to bpf_dynptr_read and bpf_dynptr_write APIs bpf: Make sure mac_header was set before using it xdp: Fix spurious packet loss in generic XDP TX path ==================== Link: https://lore.kernel.org/r/20220708213418.19626-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-08ipv4: Fix a data-race around sysctl_fib_sync_mem.Kuniyuki Iwashima1-1/+1
While reading sysctl_fib_sync_mem, it can be changed concurrently. So, we need to add READ_ONCE() to avoid a data-race. Fixes: 9ab948a91b2c ("ipv4: Allow amount of dirty memory from fib resizing to be controllable") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-08icmp: Fix data-races around sysctl.Kuniyuki Iwashima1-2/+3
While reading icmp sysctl variables, they can be changed concurrently. So, we need to add READ_ONCE() to avoid data-races. Fixes: 4cdf507d5452 ("icmp: add a global rate limitation") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-08cipso: Fix data-races around sysctl.Kuniyuki Iwashima1-5/+7
While reading cipso sysctl variables, they can be changed concurrently. So, we need to add READ_ONCE() to avoid data-races. Fixes: 446fda4f2682 ("[NetLabel]: CIPSOv4 engine") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-08inetpeer: Fix data-races around sysctl.Kuniyuki Iwashima1-4/+8
While reading inetpeer sysctl variables, they can be changed concurrently. So, we need to add READ_ONCE() to avoid data-races. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-08tcp: Fix a data-race around sysctl_tcp_max_orphans.Kuniyuki Iwashima1-1/+2
While reading sysctl_tcp_max_orphans, it can be changed concurrently. So, we need to add READ_ONCE() to avoid a data-race. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-07netfilter: conntrack: fix crash due to confirmed bit load reorderingFlorian Westphal3-0/+26
Kajetan Puchalski reports crash on ARM, with backtrace of: __nf_ct_delete_from_lists nf_ct_delete early_drop __nf_conntrack_alloc Unlike atomic_inc_not_zero, refcount_inc_not_zero is not a full barrier. conntrack uses SLAB_TYPESAFE_BY_RCU, i.e. it is possible that a 'newly' allocated object is still in use on another CPU: CPU1 CPU2 encounter 'ct' during hlist walk delete_from_lists refcount drops to 0 kmem_cache_free(ct); __nf_conntrack_alloc() // returns same object refcount_inc_not_zero(ct); /* might fail */ /* If set, ct is public/in the hash table */ test_bit(IPS_CONFIRMED_BIT, &ct->status); In case CPU1 already set refcount back to 1, refcount_inc_not_zero() will succeed. The expected possibilities for a CPU that obtained the object 'ct' (but no reference so far) are: 1. refcount_inc_not_zero() fails. CPU2 ignores the object and moves to the next entry in the list. This happens for objects that are about to be free'd, that have been free'd, or that have been reallocated by __nf_conntrack_alloc(), but where the refcount has not been increased back to 1 yet. 2. refcount_inc_not_zero() succeeds. CPU2 checks the CONFIRMED bit in ct->status. If set, the object is public/in the table. If not, the object must be skipped; CPU2 calls nf_ct_put() to un-do the refcount increment and moves to the next object. Parallel deletion from the hlists is prevented by a 'test_and_set_bit(IPS_DYING_BIT, &ct->status);' check, i.e. only one cpu will do the unlink, the other one will only drop its reference count. Because refcount_inc_not_zero is not a full barrier, CPU2 may try to delete an object that is not on any list: 1. refcount_inc_not_zero() successful (refcount inited to 1 on other CPU) 2. CONFIRMED test also successful (load was reordered or zeroing of ct->status not yet visible) 3. delete_from_lists unlinks entry not on the hlist, because IPS_DYING_BIT is 0 (already cleared). 2) is already wrong: CPU2 will handle a partially initited object that is supposed to be private to CPU1. Add needed barriers when refcount_inc_not_zero() is successful. It also inserts a smp_wmb() before the refcount is set to 1 during allocation. Because other CPU might still see the object, refcount_set(1) "resurrects" it, so we need to make sure that other CPUs will also observe the right content. In particular, the CONFIRMED bit test must only pass once the object is fully initialised and either in the hash or about to be inserted (with locks held to delay possible unlink from early_drop or gc worker). I did not change flow_offload_alloc(), as far as I can see it should call refcount_inc(), not refcount_inc_not_zero(): the ct object is attached to the skb so its refcount should be >= 1 in all cases. v2: prefer smp_acquire__after_ctrl_dep to smp_rmb (Will Deacon). v3: keep smp_acquire__after_ctrl_dep close to refcount_inc_not_zero call add comment in nf_conntrack_netlink, no control dependency there due to locks. Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/all/Yr7WTfd6AVTQkLjI@e126311.manchester.arm.com/ Reported-by: Kajetan Puchalski <kajetan.puchalski@arm.com> Diagnosed-by: Will Deacon <will@kernel.org> Fixes: 719774377622 ("netfilter: conntrack: convert to refcount_t api") Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Will Deacon <will@kernel.org>
2022-07-07Merge tag 'net-5.19-rc6' of ↵Linus Torvalds14-57/+155
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bpf, netfilter, can, and bluetooth. Current release - regressions: - bluetooth: fix deadlock on hci_power_on_sync Previous releases - regressions: - sched: act_police: allow 'continue' action offload - eth: usbnet: fix memory leak in error case - eth: ibmvnic: properly dispose of all skbs during a failover Previous releases - always broken: - bpf: - fix insufficient bounds propagation from adjust_scalar_min_max_vals - clear page contiguity bit when unmapping pool - netfilter: nft_set_pipapo: release elements in clone from abort path - mptcp: netlink: issue MP_PRIO signals from userspace PMs - can: - rcar_canfd: fix data transmission failed on R-Car V3U - gs_usb: gs_usb_open/close(): fix memory leak Misc: - add Wenjia as SMC maintainer" * tag 'net-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits) wireguard: Kconfig: select CRYPTO_CHACHA_S390 crypto: s390 - do not depend on CRYPTO_HW for SIMD implementations wireguard: selftests: use microvm on x86 wireguard: selftests: always call kernel makefile wireguard: selftests: use virt machine on m68k wireguard: selftests: set fake real time in init r8169: fix accessing unset transport header net: rose: fix UAF bug caused by rose_t0timer_expiry usbnet: fix memory leak in error case Revert "tls: rx: move counting TlsDecryptErrors for sync" mptcp: update MIB_RMSUBFLOW in cmd_sf_destroy mptcp: fix local endpoint accounting selftests: mptcp: userspace PM support for MP_PRIO signals mptcp: netlink: issue MP_PRIO signals from userspace PMs mptcp: Acquire the subflow socket lock before modifying MP_PRIO flags mptcp: Avoid acquiring PM lock for subflow priority changes mptcp: fix locking in mptcp_nl_cmd_sf_destroy() net/mlx5e: Fix matchall police parameters validation net/sched: act_police: allow 'continue' action offload net: lan966x: hardcode the number of external ports ...
2022-07-07net: rose: fix UAF bug caused by rose_t0timer_expiryDuoming Zhou1-2/+2
There are UAF bugs caused by rose_t0timer_expiry(). The root cause is that del_timer() could not stop the timer handler that is running and there is no synchronization. One of the race conditions is shown below: (thread 1) | (thread 2) | rose_device_event | rose_rt_device_down | rose_remove_neigh rose_t0timer_expiry | rose_stop_t0timer(rose_neigh) ... | del_timer(&neigh->t0timer) | kfree(rose_neigh) //[1]FREE neigh->dce_mode //[2]USE | The rose_neigh is deallocated in position [1] and use in position [2]. The crash trace triggered by POC is like below: BUG: KASAN: use-after-free in expire_timers+0x144/0x320 Write of size 8 at addr ffff888009b19658 by task swapper/0/0 ... Call Trace: <IRQ> dump_stack_lvl+0xbf/0xee print_address_description+0x7b/0x440 print_report+0x101/0x230 ? expire_timers+0x144/0x320 kasan_report+0xed/0x120 ? expire_timers+0x144/0x320 expire_timers+0x144/0x320 __run_timers+0x3ff/0x4d0 run_timer_softirq+0x41/0x80 __do_softirq+0x233/0x544 ... This patch changes rose_stop_ftimer() and rose_stop_t0timer() in rose_remove_neigh() to del_timer_sync() in order that the timer handler could be finished before the resources such as rose_neigh and so on are deallocated. As a result, the UAF bugs could be mitigated. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220705125610.77971-1-duoming@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-06xdp: Fix spurious packet loss in generic XDP TX pathJohan Almbladh1-2/+6
The byte queue limits (BQL) mechanism is intended to move queuing from the driver to the network stack in order to reduce latency caused by excessive queuing in hardware. However, when transmitting or redirecting a packet using generic XDP, the qdisc layer is bypassed and there are no additional queues. Since netif_xmit_stopped() also takes BQL limits into account, but without having any alternative queuing, packets are silently dropped. This patch modifies the drop condition to only consider cases when the driver itself cannot accept any more packets. This is analogous to the condition in __dev_direct_xmit(). Dropped packets are also counted on the device. Bypassing the qdisc layer in the generic XDP TX path means that XDP packets are able to starve other packets going through a qdisc, and DDOS attacks will be more effective. In-driver-XDP use dedicated TX queues, so they do not have this starvation issue. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220705082345.2494312-1-johan.almbladh@anyfinetworks.com
2022-07-06Revert "tls: rx: move counting TlsDecryptErrors for sync"Gal Pressman1-4/+4
This reverts commit 284b4d93daee56dff3e10029ddf2e03227f50dbf. When using TLS device offload and coming from tls_device_reencrypt() flow, -EBADMSG error in tls_do_decryption() should not be counted towards the TLSTlsDecryptError counter. Move the counter increase back to the decrypt_internal() call site in decrypt_skb_update(). This also fixes an issue where: if (n_sgin < 1) return -EBADMSG; Errors in decrypt_internal() were not counted after the cited patch. Fixes: 284b4d93daee ("tls: rx: move counting TlsDecryptErrors for sync") Cc: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06mptcp: update MIB_RMSUBFLOW in cmd_sf_destroyGeliang Tang1-0/+2
This patch increases MPTCP_MIB_RMSUBFLOW mib counter in userspace pm destroy subflow function mptcp_nl_cmd_sf_destroy() when removing subflow. Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment") Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06mptcp: fix local endpoint accountingPaolo Abeni1-1/+2
In mptcp_pm_nl_rm_addr_or_subflow() we always mark as available the id corresponding to the just removed address. The used bitmap actually tracks only the local IDs: we must restrict the operation when a (local) subflow is removed. Fixes: a88c9e496937 ("mptcp: do not block subflows creation on errors") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06mptcp: netlink: issue MP_PRIO signals from userspace PMsKishen Maloor3-6/+62
This change updates MPTCP_PM_CMD_SET_FLAGS to allow userspace PMs to issue MP_PRIO signals over a specific subflow selected by the connection token, local and remote address+port. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/286 Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment") Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06mptcp: Acquire the subflow socket lock before modifying MP_PRIO flagsMat Martineau3-3/+12
When setting up a subflow's flags for sending MP_PRIO MPTCP options, the subflow socket lock was not held while reading and modifying several struct members that are also read and modified in mptcp_write_options(). Acquire the subflow socket lock earlier and send the MP_PRIO ACK with that lock already acquired. Add a new variant of the mptcp_subflow_send_ack() helper to use with the subflow lock held. Fixes: 067065422fcd ("mptcp: add the outgoing MP_PRIO support") Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06mptcp: Avoid acquiring PM lock for subflow priority changesMat Martineau2-6/+5
The in-kernel path manager code for changing subflow flags acquired both the msk socket lock and the PM lock when possibly changing the "backup" and "fullmesh" flags. mptcp_pm_nl_mp_prio_send_ack() does not access anything protected by the PM lock, and it must release and reacquire the PM lock. By pushing the PM lock to where it is needed in mptcp_pm_nl_fullmesh(), the lock is only acquired when the fullmesh flag is changed and the backup flag code no longer has to release and reacquire the PM lock. The change in locking context requires the MIB update to be modified - move that to a better location instead. This change also makes it possible to call mptcp_pm_nl_mp_prio_send_ack() for the userspace PM commands without manipulating the in-kernel PM lock. Fixes: 0f9f696a502e ("mptcp: add set_flags command in PM netlink") Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06mptcp: fix locking in mptcp_nl_cmd_sf_destroy()Paolo Abeni1-13/+6
The user-space PM subflow removal path uses a couple of helpers that must be called under the msk socket lock and the current code lacks such requirement. Change the existing lock scope so that the relevant code is under its protection. Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/287 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06net/sched: act_police: allow 'continue' action offloadVlad Buslov1-1/+1
Offloading police with action TC_ACT_UNSPEC was erroneously disabled even though it was supported by mlx5 matchall offload implementation, which didn't verify the action type but instead assumed that any single police action attached to matchall classifier is a 'continue' action. Lack of action type check made it non-obvious what mlx5 matchall implementation actually supports and caused implementers and reviewers of referenced commits to disallow it as a part of improved validation code. Fixes: b8cd5831c61c ("net: flow_offload: add tc police action parameters") Fixes: b50e462bc22d ("net/sched: act_police: Add extack messages for offload failure") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-05Bluetooth: core: Fix deadlock on hci_power_on_sync.Vasyl Vavrychuk2-1/+3
`cancel_work_sync(&hdev->power_on)` was moved to hci_dev_close_sync in commit [1] to ensure that power_on work is canceled after HCI interface down. But, in certain cases power_on work function may call hci_dev_close_sync itself: hci_power_on -> hci_dev_do_close -> hci_dev_close_sync -> cancel_work_sync(&hdev->power_on), causing deadlock. In particular, this happens when device is rfkilled on boot. To avoid deadlock, move power_on work canceling out of hci_dev_do_close/hci_dev_close_sync. Deadlock introduced by commit [1] was reported in [2,3] as broken suspend. Suspend did not work because `hdev->req_lock` held as result of `power_on` work deadlock. In fact, other BT features were not working. It was not observed when testing [1] since it was verified without rfkill in place. NOTE: It is not needed to cancel power_on work from other places where hci_dev_do_close/hci_dev_close_sync is called in case: * Requests were serialized due to `hdev->req_workqueue`. The power_on work is first in that workqueue. * hci_rfkill_set_block which won't close device anyway until HCI_SETUP is on. * hci_sock_release which runs after hci_sock_bind which ensures HCI_SETUP was cleared. As result, behaviour is the same as in pre-dd06ed7 commit, except power_on work cancel added to hci_dev_close. [1]: commit ff7f2926114d ("Bluetooth: core: Fix missing power_on work cancel on HCI close") [2]: https://lore.kernel.org/lkml/20220614181706.26513-1-max.oss.09@gmail.com/ [2]: https://lore.kernel.org/lkml/1236061d-95dd-c3ad-a38f-2dae7aae51ef@o2.pl/ Fixes: ff7f2926114d ("Bluetooth: core: Fix missing power_on work cancel on HCI close") Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> Reported-by: Max Krummenacher <max.krummenacher@toradex.com> Reported-by: Mateusz Jonczyk <mat.jonczyk@o2.pl> Tested-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-04can: bcm: use call_rcu() instead of costly synchronize_rcu()Oliver Hartkopp1-4/+14
In commit d5f9023fa61e ("can: bcm: delay release of struct bcm_op after synchronize_rcu()") Thadeu Lima de Souza Cascardo introduced two synchronize_rcu() calls in bcm_release() (only once at socket close) and in bcm_delete_rx_op() (called on removal of each single bcm_op). Unfortunately this slow removal of the bcm_op's affects user space applications like cansniffer where the modification of a filter removes 2048 bcm_op's which blocks the cansniffer application for 40(!) seconds. In commit 181d4447905d ("can: gw: use call_rcu() instead of costly synchronize_rcu()") Eric Dumazet replaced the synchronize_rcu() calls with several call_rcu()'s to safely remove the data structures after the removal of CAN ID subscriptions with can_rx_unregister() calls. This patch adopts Erics approach for the can-bcm which should be applicable since the removal of tasklet_kill() in bcm_remove_op() and the introduction of the HRTIMER_MODE_SOFT timer handling in Linux 5.4. Fixes: d5f9023fa61e ("can: bcm: delay release of struct bcm_op after synchronize_rcu()") # >= 5.4 Link: https://lore.kernel.org/all/20220520183239.19111-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org Cc: Eric Dumazet <edumazet@google.com> Cc: Norbert Slusarek <nslusarek@gmx.net> Cc: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller2-16/+41
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Insufficient validation of element datatype and length in nft_setelem_parse_data(). At least commit 7d7402642eaf updates maximum element data area up to 64 bytes when only 16 bytes where supported at the time. Support for larger element size came later in fdb9c405e35b though. Picking this older commit as Fixes: tag to be safe than sorry. 2) Memleak in pipapo destroy path, reproducible when transaction in aborted. This is already triggering in the existing netfilter test infrastructure since more recent new tests are covering this path. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02netfilter: nft_set_pipapo: release elements in clone from abort pathPablo Neira Ayuso1-15/+33
New elements that reside in the clone are not released in case that the transaction is aborted. [16302.231754] ------------[ cut here ]------------ [16302.231756] WARNING: CPU: 0 PID: 100509 at net/netfilter/nf_tables_api.c:1864 nf_tables_chain_destroy+0x26/0x127 [nf_tables] [...] [16302.231882] CPU: 0 PID: 100509 Comm: nft Tainted: G W 5.19.0-rc3+ #155 [...] [16302.231887] RIP: 0010:nf_tables_chain_destroy+0x26/0x127 [nf_tables] [16302.231899] Code: f3 fe ff ff 41 55 41 54 55 53 48 8b 6f 10 48 89 fb 48 c7 c7 82 96 d9 a0 8b 55 50 48 8b 75 58 e8 de f5 92 e0 83 7d 50 00 74 09 <0f> 0b 5b 5d 41 5c 41 5d c3 4c 8b 65 00 48 8b 7d 08 49 39 fc 74 05 [...] [16302.231917] Call Trace: [16302.231919] <TASK> [16302.231921] __nf_tables_abort.cold+0x23/0x28 [nf_tables] [16302.231934] nf_tables_abort+0x30/0x50 [nf_tables] [16302.231946] nfnetlink_rcv_batch+0x41a/0x840 [nfnetlink] [16302.231952] ? __nla_validate_parse+0x48/0x190 [16302.231959] nfnetlink_rcv+0x110/0x129 [nfnetlink] [16302.231963] netlink_unicast+0x211/0x340 [16302.231969] netlink_sendmsg+0x21e/0x460 Add nft_set_pipapo_match_destroy() helper function to release the elements in the lookup tables. Stefano Brivio says: "We additionally look for elements pointers in the cloned matching data if priv->dirty is set, because that means that cloned data might point to additional elements we did not commit to the working copy yet (such as the abort path case, but perhaps not limited to it)." Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-07-02netfilter: nf_tables: stricter validation of element dataPablo Neira Ayuso1-1/+8
Make sure element data type and length do not mismatch the one specified by the set declaration. Fixes: 7d7402642eaf ("netfilter: nf_tables: variable sized set element keys / data") Reported-by: Hugues ANGUELKOV <hanguelkov@randorisec.fr> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-07-02Merge tag 'nfsd-5.19-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: "Notable regression fixes: - Fix NFSD crash during NFSv4.2 READ_PLUS operation - Fix incorrect status code returned by COMMIT operation" * tag 'nfsd-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: SUNRPC: Fix READ_PLUS crasher NFSD: restore EINVAL error translation in nfsd_commit()
2022-07-02Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski1-0/+1
Daniel Borkmann says: ==================== pull-request: bpf 2022-07-02 We've added 7 non-merge commits during the last 14 day(s) which contain a total of 6 files changed, 193 insertions(+), 86 deletions(-). The main changes are: 1) Fix clearing of page contiguity when unmapping XSK pool, from Ivan Malov. 2) Two verifier fixes around bounds data propagation, from Daniel Borkmann. 3) Fix fprobe sample module's parameter descriptions, from Masami Hiramatsu. 4) General BPF maintainer entry revamp to better scale patch reviews. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, selftests: Add verifier test case for jmp32's jeq/jne bpf, selftests: Add verifier test case for imm=0,umin=0,umax=1 scalar bpf: Fix insufficient bounds propagation from adjust_scalar_min_max_vals bpf: Fix incorrect verifier simulation around jmp32's jeq/jne xsk: Clear page contiguity bit when unmapping pool bpf, docs: Better scale maintenance of BPF subsystem fprobe, samples: Add module parameter descriptions ==================== Link: https://lore.kernel.org/r/20220701230121.10354-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-01SUNRPC: Fix READ_PLUS crasherChuck Lever1-1/+1
Looks like there are still cases when "space_left - frag1bytes" can legitimately exceed PAGE_SIZE. Ensure that xdr->end always remains within the current encode buffer. Reported-by: Bruce Fields <bfields@fieldses.org> Reported-by: Zorro Lang <zlang@redhat.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216151 Fixes: 6c254bf3b637 ("SUNRPC: Fix the calculation of xdr->end in xdr_get_next_encode_buffer()") Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2022-06-30net: rose: fix UAF bugs caused by timer handlerDuoming Zhou1-15/+19
There are UAF bugs in rose_heartbeat_expiry(), rose_timer_expiry() and rose_idletimer_expiry(). The root cause is that del_timer() could not stop the timer handler that is running and the refcount of sock is not managed properly. One of the UAF bugs is shown below: (thread 1) | (thread 2) | rose_bind | rose_connect | rose_start_heartbeat rose_release | (wait a time) case ROSE_STATE_0 | rose_destroy_socket | rose_heartbeat_expiry rose_stop_heartbeat | sock_put(sk) | ... sock_put(sk) // FREE | | bh_lock_sock(sk) // USE The sock is deallocated by sock_put() in rose_release() and then used by bh_lock_sock() in rose_heartbeat_expiry(). Although rose_destroy_socket() calls rose_stop_heartbeat(), it could not stop the timer that is running. The KASAN report triggered by POC is shown below: BUG: KASAN: use-after-free in _raw_spin_lock+0x5a/0x110 Write of size 4 at addr ffff88800ae59098 by task swapper/3/0 ... Call Trace: <IRQ> dump_stack_lvl+0xbf/0xee print_address_description+0x7b/0x440 print_report+0x101/0x230 ? irq_work_single+0xbb/0x140 ? _raw_spin_lock+0x5a/0x110 kasan_report+0xed/0x120 ? _raw_spin_lock+0x5a/0x110 kasan_check_range+0x2bd/0x2e0 _raw_spin_lock+0x5a/0x110 rose_heartbeat_expiry+0x39/0x370 ? rose_start_heartbeat+0xb0/0xb0 call_timer_fn+0x2d/0x1c0 ? rose_start_heartbeat+0xb0/0xb0 expire_timers+0x1f3/0x320 __run_timers+0x3ff/0x4d0 run_timer_softirq+0x41/0x80 __do_softirq+0x233/0x544 irq_exit_rcu+0x41/0xa0 sysvec_apic_timer_interrupt+0x8c/0xb0 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1b/0x20 RIP: 0010:default_idle+0xb/0x10 RSP: 0018:ffffc9000012fea0 EFLAGS: 00000202 RAX: 000000000000bcae RBX: ffff888006660f00 RCX: 000000000000bcae RDX: 0000000000000001 RSI: ffffffff843a11c0 RDI: ffffffff843a1180 RBP: dffffc0000000000 R08: dffffc0000000000 R09: ffffed100da36d46 R10: dfffe9100da36d47 R11: ffffffff83cf0950 R12: 0000000000000000 R13: 1ffff11000ccc1e0 R14: ffffffff8542af28 R15: dffffc0000000000 ... Allocated by task 146: __kasan_kmalloc+0xc4/0xf0 sk_prot_alloc+0xdd/0x1a0 sk_alloc+0x2d/0x4e0 rose_create+0x7b/0x330 __sock_create+0x2dd/0x640 __sys_socket+0xc7/0x270 __x64_sys_socket+0x71/0x80 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 152: kasan_set_track+0x4c/0x70 kasan_set_free_info+0x1f/0x40 ____kasan_slab_free+0x124/0x190 kfree+0xd3/0x270 __sk_destruct+0x314/0x460 rose_release+0x2fa/0x3b0 sock_close+0xcb/0x230 __fput+0x2d9/0x650 task_work_run+0xd6/0x160 exit_to_user_mode_loop+0xc7/0xd0 exit_to_user_mode_prepare+0x4e/0x80 syscall_exit_to_user_mode+0x20/0x40 do_syscall_64+0x4f/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 This patch adds refcount of sock when we use functions such as rose_start_heartbeat() and so on to start timer, and decreases the refcount of sock when timer is finished or deleted by functions such as rose_stop_heartbeat() and so on. As a result, the UAF bugs could be mitigated. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Tested-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220629002640.5693-1-duoming@zju.edu.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-30ipv6: fix lockdep splat in in6_dump_addrs()Eric Dumazet1-2/+2
As reported by syzbot, we should not use rcu_dereference() when rcu_read_lock() is not held. WARNING: suspicious RCU usage 5.19.0-rc2-syzkaller #0 Not tainted net/ipv6/addrconf.c:5175 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by syz-executor326/3617: #0: ffffffff8d5848e8 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xae/0xc20 net/netlink/af_netlink.c:2223 stack backtrace: CPU: 0 PID: 3617 Comm: syz-executor326 Not tainted 5.19.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 in6_dump_addrs+0x12d1/0x1790 net/ipv6/addrconf.c:5175 inet6_dump_addr+0x9c1/0xb50 net/ipv6/addrconf.c:5300 netlink_dump+0x541/0xc20 net/netlink/af_netlink.c:2275 __netlink_dump_start+0x647/0x900 net/netlink/af_netlink.c:2380 netlink_dump_start include/linux/netlink.h:245 [inline] rtnetlink_rcv_msg+0x73e/0xc90 net/core/rtnetlink.c:6046 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2492 ___sys_sendmsg+0xf3/0x170 net/socket.c:2546 __sys_sendmsg net/socket.c:2575 [inline] __do_sys_sendmsg net/socket.c:2584 [inline] __se_sys_sendmsg net/socket.c:2582 [inline] __x64_sys_sendmsg+0x132/0x220 net/socket.c:2582 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: 88e2ca308094 ("mld: convert ifmcaddr6 to RCU") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20220628121248.858695-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski4-26/+65
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Restore set counter when one of the CPU loses race to add elements to sets. 2) After NF_STOLEN, skb might be there no more, update nftables trace infra to avoid access to skb in this case. From Florian Westphal. 3) nftables bridge might register a prerouting hook with zero priority, br_netfilter incorrectly skips it. Also from Florian. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: br_netfilter: do not skip all hooks with 0 priority netfilter: nf_tables: avoid skb access on nf_stolen netfilter: nft_dynset: restore set element counter when failing to update ==================== Link: https://lore.kernel.org/r/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>