summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2016-12-15Merge tag 'for-linus' of ↵Linus Torvalds1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma updates from Doug Ledford: "This is the complete update for the rdma stack for this release cycle. Most of it is typical driver and core updates, but there is the entirely new VMWare pvrdma driver. You may have noticed that there were changes in DaveM's pull request to the bnxt Ethernet driver to support a RoCE RDMA driver. The bnxt_re driver was tentatively set to be pulled in this release cycle, but it simply wasn't ready in time and was dropped (a few review comments still to address, and some multi-arch build issues like prefetch() not working across all arches). Summary: - shared mlx5 updates with net stack (will drop out on merge if Dave's tree has already been merged) - driver updates: cxgb4, hfi1, hns-roce, i40iw, mlx4, mlx5, qedr, rxe - debug cleanups - new connection rejection helpers - SRP updates - various misc fixes - new paravirt driver from vmware" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (210 commits) IB: Add vmw_pvrdma driver IB/mlx4: fix improper return value IB/ocrdma: fix bad initialization infiniband: nes: return value of skb_linearize should be handled MAINTAINERS: Update Intel RDMA RNIC driver maintainers MAINTAINERS: Remove Mitesh Ahuja from emulex maintainers IB/core: fix unmap_sg argument qede: fix general protection fault may occur on probe IB/mthca: Replace pci_pool_alloc by pci_pool_zalloc mlx5, calc_sq_size(): Make a debug message more informative mlx5: Remove a set-but-not-used variable mlx5: Use { } instead of { 0 } to init struct IB/srp: Make writing the add_target sysfs attr interruptible IB/srp: Make mapping failures easier to debug IB/srp: Make login failures easier to debug IB/srp: Introduce a local variable in srp_add_one() IB/srp: Fix CONFIG_DYNAMIC_DEBUG=n build IB/multicast: Check ib_find_pkey() return value IPoIB: Avoid reading an uninitialized member variable IB/mad: Fix an array index check ...
2016-12-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-7/+8
Merge more updates from Andrew Morton: - a few misc things - kexec updates - DMA-mapping updates to better support networking DMA operations - IPC updates - various MM changes to improve DAX fault handling - lots of radix-tree changes, mainly to the test suite. All leading up to reimplementing the IDA/IDR code to be a wrapper layer over the radix-tree. However the final trigger-pulling patch is held off for 4.11. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits) radix tree test suite: delete unused rcupdate.c radix tree test suite: add new tag check radix-tree: ensure counts are initialised radix tree test suite: cache recently freed objects radix tree test suite: add some more functionality idr: reduce the number of bits per level from 8 to 6 rxrpc: abstract away knowledge of IDR internals tpm: use idr_find(), not idr_find_slowpath() idr: add ida_is_empty radix tree test suite: check multiorder iteration radix-tree: fix replacement for multiorder entries radix-tree: add radix_tree_split_preload() radix-tree: add radix_tree_split radix-tree: add radix_tree_join radix-tree: delete radix_tree_range_tag_if_tagged() radix-tree: delete radix_tree_locate_item() radix-tree: improve multiorder iterators btrfs: fix race in btrfs_free_dummy_fs_info() radix-tree: improve dump output radix-tree: make radix_tree_find_next_bit more useful ...
2016-12-15rxrpc: abstract away knowledge of IDR internalsMatthew Wilcox2-7/+8
Add idr_get_cursor() / idr_set_cursor() APIs, and remove the reference to IDR_SIZE. Link: http://lkml.kernel.org/r/1480369871-5271-65-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: David Howells <dhowells@redhat.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-15Merge branch 'stable-4.10' of git://git.infradead.org/users/pcmoore/auditLinus Torvalds1-20/+15
Pull audit updates from Paul Moore: "After the small number of patches for v4.9, we've got a much bigger pile for v4.10. The bulk of these patches involve a rework of the audit backlog queue to enable us to move the netlink multicasting out of the task/thread that generates the audit record and into the kernel thread that emits the record (just like we do for the audit unicast to auditd). While we were playing with the backlog queue(s) we fixed a number of other little problems with the code, and from all the testing so far things look to be in much better shape now. Doing this also allowed us to re-enable disabling IRQs for some netns operations ("netns: avoid disabling irq for netns id"). The remaining patches fix some small problems that are well documented in the commit descriptions, as well as adding session ID filtering support" * 'stable-4.10' of git://git.infradead.org/users/pcmoore/audit: audit: use proper refcount locking on audit_sock netns: avoid disabling irq for netns id audit: don't ever sleep on a command record/message audit: handle a clean auditd shutdown with grace audit: wake up kauditd_thread after auditd registers audit: rework audit_log_start() audit: rework the audit queue handling audit: rename the queues and kauditd related functions audit: queue netlink multicast sends just like we do for unicast sends audit: fixup audit_init() audit: move kaudit thread start from auditd registration to kaudit init (#2) audit: add support for session ID user filter audit: fix formatting of AUDIT_CONFIG_CHANGE events audit: skip sessionid sentinel value when auto-incrementing audit: tame initialization warning len_abuf in audit_log_execve_info audit: less stack usage for /proc/*/loginuid
2016-12-14netns: avoid disabling irq for netns idPaul Moore1-20/+15
Bring back commit bc51dddf98c9 ("netns: avoid disabling irq for netns id") now that we've fixed some audit multicast issues that caused problems with original attempt. Additional information, and history, can be found in the links below: * https://github.com/linux-audit/audit-kernel/issues/22 * https://github.com/linux-audit/audit-kernel/issues/23 Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-12-14rds_rdma: log the connection reject messageSteve Wise1-1/+4
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-13Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds4-121/+80
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull smp hotplug updates from Thomas Gleixner: "This is the final round of converting the notifier mess to the state machine. The removal of the notifiers and the related infrastructure will happen around rc1, as there are conversions outstanding in other trees. The whole exercise removed about 2000 lines of code in total and in course of the conversion several dozen bugs got fixed. The new mechanism allows to test almost every hotplug step standalone, so usage sites can exercise all transitions extensively. There is more room for improvement, like integrating all the pointlessly different architecture mechanisms of synchronizing, setting cpus online etc into the core code" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits) tracing/rb: Init the CPU mask on allocation soc/fsl/qbman: Convert to hotplug state machine soc/fsl/qbman: Convert to hotplug state machine zram: Convert to hotplug state machine KVM/PPC/Book3S HV: Convert to hotplug state machine arm64/cpuinfo: Convert to hotplug state machine arm64/cpuinfo: Make hotplug notifier symmetric mm/compaction: Convert to hotplug state machine iommu/vt-d: Convert to hotplug state machine mm/zswap: Convert pool to hotplug state machine mm/zswap: Convert dst-mem to hotplug state machine mm/zsmalloc: Convert to hotplug state machine mm/vmstat: Convert to hotplug state machine mm/vmstat: Avoid on each online CPU loops mm/vmstat: Drop get_online_cpus() from init_cpu_node_state/vmstat_cpu_dead() tracing/rb: Convert to hotplug state machine oprofile/nmi timer: Convert to hotplug state machine net/iucv: Use explicit clean up labels in iucv_init() x86/pci/amd-bus: Convert to hotplug state machine x86/oprofile/nmi: Convert to hotplug state machine ...
2016-12-12Merge branch 'locking-core-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "The tree got pretty big in this development cycle, but the net effect is pretty good: 115 files changed, 673 insertions(+), 1522 deletions(-) The main changes were: - Rework and generalize the mutex code to remove per arch mutex primitives. (Peter Zijlstra) - Add vCPU preemption support: add an interface to query the preemption status of vCPUs and use it in locking primitives - this optimizes paravirt performance. (Pan Xinhui, Juergen Gross, Christian Borntraeger) - Introduce cpu_relax_yield() and remov cpu_relax_lowlatency() to clean up and improve the s390 lock yielding machinery and its core kernel impact. (Christian Borntraeger) - Micro-optimize mutexes some more. (Waiman Long) - Reluctantly add the to-be-deprecated mutex_trylock_recursive() interface on a temporary basis, to give the DRM code more time to get rid of its locking hacks. Any other users will be NAK-ed on sight. (We turned off the deprecation warning for the time being to not pollute the build log.) (Peter Zijlstra) - Improve the rtmutex code a bit, in light of recent long lived bugs/races. (Thomas Gleixner) - Misc fixes, cleanups" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) x86/paravirt: Fix bool return type for PVOP_CALL() x86/paravirt: Fix native_patch() locking/ww_mutex: Use relaxed atomics locking/rtmutex: Explain locking rules for rt_mutex_proxy_unlock()/init_proxy_locked() locking/rtmutex: Get rid of RT_MUTEX_OWNER_MASKALL x86/paravirt: Optimize native pv_lock_ops.vcpu_is_preempted() locking/mutex: Break out of expensive busy-loop on {mutex,rwsem}_spin_on_owner() when owner vCPU is preempted locking/osq: Break out of spin-wait busy waiting loop for a preempted vCPU in osq_lock() Documentation/virtual/kvm: Support the vCPU preemption check x86/xen: Support the vCPU preemption check x86/kvm: Support the vCPU preemption check x86/kvm: Support the vCPU preemption check kvm: Introduce kvm_write_guest_offset_cached() locking/core, x86/paravirt: Implement vcpu_is_preempted(cpu) for KVM and Xen guests locking/spinlocks, s390: Implement vcpu_is_preempted(cpu) locking/core, powerpc: Implement vcpu_is_preempted(cpu) sched/core: Introduce the vcpu_is_preempted(cpu) interface sched/wake_q: Rename WAKE_Q to DEFINE_WAKE_Q locking/core: Provide common cpu_relax_yield() definition locking/mutex: Don't mark mutex_trylock_recursive() as deprecated, temporarily ...
2016-12-11netfilter: nft_counter: rework atomic dump and resetPablo Neira1-72/+55
Dump and reset doesn't work unless cmpxchg64() is used both from packet and control plane paths. This approach is going to be slow though. Instead, use a percpu seqcount to fetch counters consistently, then subtract bytes and packets in case a reset was requested. The cpu that running over the reset code is guaranteed to own this stats exclusively, we have to turn counters into signed 64bit though so stats update on reset don't get wrong on underflow. This patch is based on original sketch from Eric Dumazet. Fixes: 43da04a593d8 ("netfilter: nf_tables: atomic dump and reset for stateful objects") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11net: l2tp: ppp: change PPPOL2TP_MSG_* => L2TP_MSG_*Asbjørn Sloth Tønnesen1-27/+27
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.st> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11net: l2tp: export debug flags to UAPIAsbjørn Sloth Tønnesen1-10/+0
Move the L2TP_MSG_* definitions to UAPI, as it is part of the netlink API. Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.st> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11net: bridge: shorten ageing time on topology changeVivien Didelot3-2/+30
802.1D [1] specifies that the bridges must use a short value to age out dynamic entries in the Filtering Database for a period, once a topology change has been communicated by the root bridge. Add a bridge_ageing_time member in the net_bridge structure to store the bridge ageing time value configured by the user (ioctl/netlink/sysfs). If we are using in-kernel STP, shorten the ageing time value to twice the forward delay used by the topology when the topology change flag is set. When the flag is cleared, restore the configured ageing time. [1] "8.3.5 Notifying topology changes ", http://profesores.elo.utfsm.cl/~agv/elo309/doc/802.1D-1998.pdf Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11net: bridge: add helper to set topology changeVivien Didelot4-4/+11
Add a __br_set_topology_change helper to set the topology change value. This can be later extended to add actions when the topology change flag is set or cleared. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11net: bridge: add helper to offload ageing timeVivien Didelot3-17/+24
The SWITCHDEV_ATTR_ID_BRIDGE_AGEING_TIME switchdev attr is actually set when initializing a bridge port, and when configuring the bridge ageing time from ioctl/netlink/sysfs. Add a __set_ageing_time helper to offload the ageing time to physical switches, and add the SWITCHDEV_F_DEFER flag since it can be called under bridge lock. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11net: socket: removed an unnecessary newlineAmit Kushwaha1-1/+0
This patch removes a newline which was added in socket.c file in net-next Signed-off-by: Amit Kushwaha <kushwaha.a@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11netlink: use blocking notifierWANG Cong1-4/+4
netlink_chain is called in ->release(), which is apparently a process context, so we don't have to use an atomic notifier here. Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+3
2016-12-10net: skb_condense() can also deal with empty skbsEric Dumazet1-9/+13
It seems attackers can also send UDP packets with no payload at all. skb_condense() can still be a win in this case. It will be possible to replace the custom code in tcp_add_backlog() to get full benefit from skb_condense() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-10Merge tag 'mac80211-next-for-davem-2016-12-09' of ↵David S. Miller5-11/+55
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Three fixes: * fix a logic bug introduced by a previous cleanup * fix nl80211 attribute confusing (trying to use a single attribute for two purposes) * fix a long-standing BSS leak that happens when an association attempt is abandoned ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-10udp: udp_rmem_release() should touch sk_rmem_alloc laterEric Dumazet1-1/+2
In flood situations, keeping sk_rmem_alloc at a high value prevents producers from touching the socket. It makes sense to lower sk_rmem_alloc only at the end of udp_rmem_release() after the thread draining receive queue in udp_recvmsg() finished the writes to sk_forward_alloc. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-10udp: add batching to udp_rmem_release()Eric Dumazet1-0/+12
If udp_recvmsg() constantly releases sk_rmem_alloc for every read packet, it gives opportunity for producers to immediately grab spinlocks and desperatly try adding another packet, causing false sharing. We can add a simple heuristic to give the signal by batches of ~25 % of the queue capacity. This patch considerably increases performance under flood by about 50 %, since the thread draining the queue is no longer slowed by false sharing. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-10udp: copy skb->truesize in the first cache lineEric Dumazet1-3/+10
In UDP RX handler, we currently clear skb->dev before skb is added to receive queue, because device pointer is no longer available once we exit from RCU section. Since this first cache line is always hot, lets reuse this space to store skb->truesize and thus avoid a cache line miss at udp_recvmsg()/udp_skb_destructor time while receive queue spinlock is held. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-10udp: add busylocks in RX pathEric Dumazet1-1/+42
Idea of busylocks is to let producers grab an extra spinlock to relieve pressure on the receive_queue spinlock shared by consumer. This behavior is requested only once socket receive queue is above half occupancy. Under flood, this means that only one producer can be in line trying to acquire the receive_queue spinlock. These busylock can be allocated on a per cpu manner, instead of a per socket one (that would consume a cache line per socket) This patch considerably improves UDP behavior under stress, depending on number of NIC RX queues and/or RPS spread. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-09cfg80211/mac80211: fix BSS leaks when abandoning assoc attemptsJohannes Berg4-9/+39
When mac80211 abandons an association attempt, it may free all the data structures, but inform cfg80211 and userspace about it only by sending the deauth frame it received, in which case cfg80211 has no link to the BSS struct that was used and will not cfg80211_unhold_bss() it. Fix this by providing a way to inform cfg80211 of this with the BSS entry passed, so that it can clean up properly, and use this ability in the appropriate places in mac80211. This isn't ideal: some code is more or less duplicated and tracing is missing. However, it's a fairly small change and it's thus easier to backport - cleanups can come later. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-12-09nl80211: Use different attrs for BSSID and random MAC addr in scan reqVamsi Krishna1-1/+15
NL80211_ATTR_MAC was used to set both the specific BSSID to be scanned and the random MAC address to be used when privacy is enabled. When both the features are enabled, both the BSSID and the local MAC address were getting same value causing Probe Request frames to go with unintended DA. Hence, this has been fixed by using a different NL80211_ATTR_BSSID attribute to set the specific BSSID (which was the more recent addition in cfg80211) for a scan. Backwards compatibility with old userspace software is maintained to some extent by allowing NL80211_ATTR_MAC to be used to set the specific BSSID when scanning without enabling random MAC address use. Scanning with random source MAC address was introduced by commit ad2b26abc157 ("cfg80211: allow drivers to support random MAC addresses for scan") and the issue was introduced with the addition of the second user for the same attribute in commit 818965d39177 ("cfg80211: Allow a scan request for a specific BSSID"). Fixes: 818965d39177 ("cfg80211: Allow a scan request for a specific BSSID") Signed-off-by: Vamsi Krishna <vamsin@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-12-09nl80211: fix logic inversion in start_nan()Johannes Berg1-1/+1
Arend inadvertently inverted the logic while converting to wdev_running(), fix that. Fixes: 73c7da3dae1e ("cfg80211: add generic helper to check interface is running") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-12-09net: socket: preferred __aligned(size) for control bufferAmit Kushwaha1-1/+2
This patch cleanup checkpatch.pl warning WARNING: __aligned(size) is preferred over __attribute__((aligned(size))) Signed-off-by: Amit Kushwaha <kushwaha.a@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08Merge branch 'for-upstream' of ↵David S. Miller2-17/+69
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2016-12-08 I didn't miss your "net-next is closed" email, but it did come as a bit of a surprise, and due to time-zone differences I didn't have a chance to react to it until now. We would have had a couple of patches in bluetooth-next that we'd still have wanted to get to 4.10. Out of these the most critical one is the H7/CT2 patch for Bluetooth Security Manager Protocol, something that couldn't be published before the Bluetooth 5.0 specification went public (yesterday). If these really can't go to net-next we'll likely be sending at least this patch through bluetooth.git to net.git for rc1 inclusion. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08bpf: xdp: Allow head adjustment in XDP progMartin KaFai Lau1-2/+26
This patch allows XDP prog to extend/remove the packet data at the head (like adding or removing header). It is done by adding a new XDP helper bpf_xdp_adjust_head(). It also renames bpf_helper_changes_skb_data() to bpf_helper_changes_pkt_data() to better reflect that XDP prog does not work on skb. This patch adds one "xdp_adjust_head" bit to bpf_prog for the XDP-capable driver to check if the XDP prog requires bpf_xdp_adjust_head() support. The driver can then decide to error out during XDP_SETUP_PROG. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08udp: under rx pressure, try to condense skbsEric Dumazet2-1/+39
Under UDP flood, many softirq producers try to add packets to UDP receive queue, and one user thread is burning one cpu trying to dequeue packets as fast as possible. Two parts of the per packet cost are : - copying payload from kernel space to user space, - freeing memory pieces associated with skb. If socket is under pressure, softirq handler(s) can try to pull in skb->head the payload of the packet if it fits. Meaning the softirq handler(s) can free/reuse the page fragment immediately, instead of letting udp_recvmsg() do this hundreds of usec later, possibly from another node. Additional gains : - We reduce skb->truesize and thus can store more packets per SO_RCVBUF - We avoid cache line misses at copyout() time and consume_skb() time, and avoid one put_page() with potential alien freeing on NUMA hosts. This comes at the cost of a copy, bounded to available tail room, which is usually small. (We might have to fix GRO_MAX_HEAD which looks bigger than necessary) This patch gave me about 5 % increase in throughput in my tests. skb_condense() helper could probably used in other contexts. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08net: rfs: add a jump labelEric Dumazet2-1/+6
RFS is not commonly used, so add a jump label to avoid some conditionals in fast path. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08net/sched: cls_flower: Support matching on ICMP type and codeSimon Horman1-0/+53
Support matching on ICMP type and code. Example usage: tc qdisc add dev eth0 ingress tc filter add dev eth0 protocol ip parent ffff: flower \ indev eth0 ip_proto icmp type 8 code 0 action drop tc filter add dev eth0 protocol ipv6 parent ffff: flower \ indev eth0 ip_proto icmpv6 type 128 code 0 action drop Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08flow dissector: ICMP supportSimon Horman1-0/+31
Allow dissection of ICMP(V6) type and code. This should only occur if a packet is ICMP(V6) and the dissector has FLOW_DISSECTOR_KEY_ICMP set. There are currently no users of FLOW_DISSECTOR_KEY_ICMP. A follow-up patch will allow FLOW_DISSECTOR_KEY_ICMP to be used by the flower classifier. Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08net/sched: cls_flower: Add support for matching on flagsOr Gerlitz1-0/+76
Add UAPI to provide set of flags for matching, where the flags provided from user-space are mapped to flow-dissector flags. The 1st flag allows to match on whether the packet is an IP fragment and corresponds to the FLOW_DIS_IS_FRAGMENT flag. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08icmp: correct return value of icmp_rcv()Zhang Shengju1-2/+2
Currently, icmp_rcv() always return zero on a packet delivery upcall. To make its behavior more compliant with the way this API should be used, this patch changes this to let it return NET_RX_SUCCESS when the packet is proper handled, and NET_RX_DROP otherwise. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08Bluetooth: SMP: Add support for H7 crypto function and CT2 auth flagJohan Hedberg2-17/+69
Bluetooth 5.0 introduces a new H7 key generation function that's used when both sides of the pairing set the CT2 authentication flag to 1. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-12-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller69-620/+2162
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains a large Netfilter update for net-next, to summarise: 1) Add support for stateful objects. This series provides a nf_tables native alternative to the extended accounting infrastructure for nf_tables. Two initial stateful objects are supported: counters and quotas. Objects are identified by a user-defined name, you can fetch and reset them anytime. You can also use a maps to allow fast lookups using any arbitrary key combination. More info at: http://marc.info/?l=netfilter-devel&m=148029128323837&w=2 2) On-demand registration of nf_conntrack and defrag hooks per netns. Register nf_conntrack hooks if we have a stateful ruleset, ie. state-based filtering or NAT. The new nf_conntrack_default_on sysctl enables this from newly created netnamespaces. Default behaviour is not modified. Patches from Florian Westphal. 3) Allocate 4k chunks and then use these for x_tables counter allocation requests, this improves ruleset load time and also datapath ruleset evaluation, patches from Florian Westphal. 4) Add support for ebpf to the existing x_tables bpf extension. From Willem de Bruijn. 5) Update layer 4 checksum if any of the pseudoheader fields is updated. This provides a limited form of 1:1 stateless NAT that make sense in specific scenario, eg. load balancing. 6) Add support to flush sets in nf_tables. This series comes with a new set->ops->deactivate_one() indirection given that we have to walk over the list of set elements, then deactivate them one by one. The existing set->ops->deactivate() performs an element lookup that we don't need. 7) Two patches to avoid cloning packets, thus speed up packet forwarding via nft_fwd from ingress. From Florian Westphal. 8) Two IPVS patches via Simon Horman: Decrement ttl in all modes to prevent infinite loops, patch from Dwip Banerjee. And one minor refactoring from Gao feng. 9) Revisit recent log support for nf_tables netdev families: One patch to ensure that we correctly handle non-ethernet packets. Another patch to add missing logger definition for netdev. Patches from Liping Zhang. 10) Three patches for nft_fib, one to address insufficient register initialization and another to solve incorrect (although harmless) byteswap operation. Moreover update xt_rpfilter and nft_fib to match lbcast packets with zeronet as source, eg. DHCP Discover packets (0.0.0.0 -> 255.255.255.255). Also from Liping Zhang. 11) Built-in DCCP, SCTP and UDPlite conntrack and NAT support, from Davide Caratti. While DCCP is rather hopeless lately, and UDPlite has been broken in many-cast mode for some little time, let's give them a chance by placing them at the same level as other existing protocols. Thus, users don't explicitly have to modprobe support for this and NAT rules work for them. Some people point to the lack of support in SOHO Linux-based routers that make deployment of new protocols harder. I guess other middleboxes outthere on the Internet are also to blame. Anyway, let's see if this has any impact in the midrun. 12) Skip software SCTP software checksum calculation if the NIC comes with SCTP checksum offload support. From Davide Caratti. 13) Initial core factoring to prepare conversion to hook array. Three patches from Aaron Conole. 14) Gao Feng made a wrong conversion to switch in the xt_multiport extension in a patch coming in the previous batch. Fix it in this batch. 15) Get vmalloc call in sync with kmalloc flags to avoid a warning and likely OOM killer intervention from x_tables. From Marcelo Ricardo Leitner. 16) Update Arturo Borrero's email address in all source code headers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07netfilter: nft_quota: allow to restore consumed quotaPablo Neira Ayuso1-2/+9
Allow to restore consumed quota, this is useful to restore the quota state across reboots. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-12-07netfilter: xt_bpf: support ebpfWillem de Bruijn1-16/+80
Add support for attaching an eBPF object by file descriptor. The iptables binary can be called with a path to an elf object or a pinned bpf object. Also pass the mode and path to the kernel to be able to return it later for iptables dump and save. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-12-07netfilter: x_tables: avoid warn and OOM killer on vmalloc callMarcelo Ricardo Leitner1-1/+3
Andrey Konovalov reported that this vmalloc call is based on an userspace request and that it's spewing traces, which may flood the logs and cause DoS if abused. Florian Westphal also mentioned that this call should not trigger OOM killer. This patch brings the vmalloc call in sync to kmalloc and disables the warn trace on allocation failure and also disable OOM killer invocation. Note, however, that under such stress situation, other places may trigger OOM killer invocation. Reported-by: Andrey Konovalov <andreyknvl@google.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-12-07netfilter: nf_tables: support for set flushingPablo Neira Ayuso3-6/+51
This patch adds support for set flushing, that consists of walking over the set elements if the NFTA_SET_ELEM_LIST_ELEMENTS attribute is set. This patch requires the following changes: 1) Add set->ops->deactivate_one() operation: This allows us to deactivate an element from the set element walk path, given we can skip the lookup that happens in ->deactivate(). 2) Add a new nft_trans_alloc_gfp() function since we need to allocate transactions using GFP_ATOMIC given the set walk path happens with held rcu_read_lock. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-12-07netfilter: nft_set: introduce nft_{hash, rbtree}_deactivate_one()Pablo Neira Ayuso2-8/+27
This new function allows us to deactivate one single element, this is required by the set flush command that comes in a follow up patch. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-12-07netfilter: nf_tables: constify struct nft_ctx * parameter in nft_trans_alloc()Pablo Neira Ayuso1-2/+2
Context is not modified by nft_trans_alloc(), so constify it. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-12-07netfilter: nat: skip checksum on offload SCTP packetsDavide Caratti1-1/+4
SCTP GSO and hardware can do CRC32c computation after netfilter processing, so we can avoid calling sctp_compute_checksum() on skb if skb->ip_summed is equal to CHECKSUM_PARTIAL. Moreover, set skb->ip_summed to CHECKSUM_NONE when the NAT code computes the CRC, to prevent offloaders from computing it again (on ixgbe this resulted in a transmission with wrong L4 checksum). Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-12-07netfilter: rpfilter: bypass ipv4 lbcast packets with zeronet sourceLiping Zhang2-9/+12
Otherwise, DHCP Discover packets(0.0.0.0->255.255.255.255) may be dropped incorrectly. Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-12-07netfilter: nf_tables: allow to filter stateful object dumps by typePablo Neira Ayuso1-0/+50
This patch adds the netlink code to filter out dump of stateful objects, through the NFTA_OBJ_TYPE netlink attribute. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-12-07netfilter: nft_objref: support for stateful object mapsPablo Neira Ayuso2-1/+119
This patch allows us to refer to stateful object dictionaries, the source register indicates the key data to be used to look up for the corresponding state object. We can refer to these maps through names or, alternatively, the map transaction id. This allows us to refer to both anonymous and named maps. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-12-07netfilter: nf_tables: add stateful object reference to set elementsPablo Neira Ayuso1-10/+62
This patch allows you to refer to stateful objects from set elements. This provides the infrastructure to create maps where the right hand side of the mapping is a stateful object. This allows us to build dictionaries of stateful objects, that you can use to perform fast lookups using any arbitrary key combination. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-12-07netfilter: nft_quota: add depleted flag for objectsPablo Neira Ayuso2-8/+29
Notify on depleted quota objects. The NFT_QUOTA_F_DEPLETED flag indicates we have reached overquota. Add pointer to table from nft_object, so we can use it when sending the depletion notification to userspace. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-12-07netfilter: nf_tables: notify internal updates of stateful objectsPablo Neira Ayuso1-12/+19
Introduce nf_tables_obj_notify() to notify internal state changes in stateful objects. This is used by the quota object to report depletion in a follow up patch. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>